Self-Organized Criticality from Protected Mean-Field Dynamics: Loop Stability and Internal Renormalization in Reflective Neural Systems Byung Gyu Chae Abstract The reflective homeostatic dynamics provides a minimal mechanism for self-organized criticality in neural systems. Starting from a reduced stochastic description, we demonstrate within the MSRJD field-theoretic framework that fluctuation effects do not destabilize the critical manifold. Instead, loop corrections are dynamically regularized by homeostatic curvature, yielding a protected mean-field critical surface that remains marginally stable under coarse-graining. Beyond robustness, we show that response-driven structural adaptation generates intrinsic parameter flows that attract the system toward the vicinity of this surface without external fine tuning. Together, these results unify loop renormalization and adaptive response in a single framework and establish a concrete route to autonomous criticality in reentrant neural dynamics. Introduction —Modern neural architectures have achieved remarkable performance across a wide range of cognitive and perceptual tasks. Nevertheless, their internal dynamics remain largely feedforward or only weakly recurrent, limiting their capacity for reflective computation, self-stabilization, and context-dependent reinterpretation of internal states 1 ; 2 ; 3 ; 4 ; 5 ; 6 ; 7 . In biological neural systems, by contrast, reentrant signaling and homeostatic regulation are widely regarded as central mechanisms supporting robust cognition, sensitivity to perturbations, and long-term stability 8 ; 9 ; 10 ; 11 ; 12 . Motivated by these considerations, we recently introduced a class of reflective homeostatic networks , in which neural activity is recursively fed back into the computation and dynamically regulated by homeostatic constraints 13 ; 14 ; 15 . When formulated in continuous time, these models admit a reduced dynamical description in terms of a small number of collective variables. This representation enables explicit analysis of stability, fluctuations, and response properties 16 ; 17 ; 18 . Initial investigations focused on local stability and boundedness of activity, revealing a delicate balance between reentrant amplification and nonlinear regulation. While this analysis establishes that runaway dynamics can be avoided, it leaves open a more fundamental question 10 ; 19 ; 20 : how does the system organize its structural parameters globally, in the presence of noise, without external fine tuning? Addressing this question requires moving beyond purely local considerations. In particular, understanding the long-time and large-scale behavior of adaptive reentrant systems demands a framework capable of treating fluctuations, response, and structural evolution on equal footing 21 ; 22 ; 23 . Remarkably, the stochastic dynamics underlying reflective homeostatic networks admits a natural field-theoretic formulation within the Martin–Siggia–Rose–Janssen–De Dominicis (MSRJD) formalism 24 ; 25 ; 26 . This representation provides a unified language in which conventional fluctuation-induced renormalization and response-driven structural adaptation emerge from the same effective action. Within this framework, two distinct but complementary mechanisms become apparent. On the one hand, Wilsonian coarse-graining over fast fluctuations generates loop corrections that renormalize the effective couplings and govern the stability of putative critical surfaces 21 ; 27 . On the other hand, the response sector of the theory induces an intrinsic flow of structural parameters when these parameters are allowed to evolve slowly in time 28 ; 29 . In this sense, the response field plays a dual role: it encodes linear susceptibility to external perturbations and simultaneously mediates an internal, adaptation-driven renormalization of structure. The central result of this work is that these two mechanisms conspire to drive reflective homeostatic dynamics toward a self-organized critical state 30 ; 31 ; 32 . Crucially, criticality here is not imposed by external tuning or boundary conditions, but is dynamically selected by the internal coupling between response, learning, and homeostatic regulation. While loop renormalization determines the robustness of the critical surface against fluctuations, response-weighted structural adaptation biases the dynamics toward the vicinity of that surface, leading to an operating point at the edge of stability. This mechanism differs fundamentally from traditional models of self-organized criticality, which typically rely on slow driving and fast dissipation or threshold-based avalanche dynamics 30 ; 32 ; 33 . In the present setting, criticality emerges as a functional consequence of reflective computation: high susceptibility enhances adaptive pressure toward marginal stability, while homeostatic nonlinearities suppress infrared instabilities and bound activity 34 ; 35 ; 36 ; 37 . The resulting critical state is therefore both fluctuation-robust and dynamically selected. More broadly, our results suggest that criticality in adaptive systems may arise not as a design principle, but as an emergent operating point enforced by response-weighted renormalization. This perspective provides a bridge between reentrant neural computation, field-theoretic methods, and self-organized critical phenomena, and points toward a general mechanism by which complex systems can maintain sensitivity and stability without external fine tuning. Figure 1: Reflective homeostatic reentry and unified MSRJD description. (a) Schematic of the reflective homeostatic reentrant network, in which reentrant amplification and fast-weight modulation confine the dynamics to a bounded activity shell. (b) Corresponding MSRJD representation of the reduced stochastic dynamics, showing that both loop renormalization of fluctuations and response-driven structural adaptation are generated by the same action. Together, these mechanisms yield a protected critical manifold that is dynamically selected without external fine tuning. Reflective homeostatic dynamics and reduced description —Our starting point is the reflective homeostatic reentrant network (FHRN) introduced in our earlier work in Fig 1(a), where reentrant activity is continuously re-injected into the dynamics under the control of a global homeostatic nonlinearity 14 ; 15 . At the microscopic level, the system is described by a continuous-time dynamical equation for a N -dimensional state vector \mathbf{o}(t)\in\mathbb{R}^{N} . A defining structural property of the FHRN is rotational symmetry in state space: the deterministic drift depends on \mathbf{o} only through its amplitude r(t)=\|\mathbf{o}(t)\| . This symmetry allows the dynamics to be decomposed into radial and angular sectors. As shown previously, global homeostatic regulation renders the radial mode strongly stable, while the angular degrees of freedom remain weakly constrained and mix rapidly on the sphere. As a result, the long-time and infrared behavior of the network is governed by an effective radial dynamics, whereas angular fluctuations act as a source of stochastic forcing. Eliminating the angular modes under a controlled separation of time scales therefore yields an effective one-dimensional stochastic equation for the radial deviation from its steady-state value. Concretely, after radial reduction and coarse-graining over angular dynamics, the collective variable r(t) obeys a stochastic differential equation of the form \dot{r}(t)=f\!\big(r(t);\theta\big)+\xi(t), (1) where \theta denotes a set of structural parameters inherited from the microscopic model, and \xi(t) is an effective Gaussian white noise arising from the eliminated angular and microscopic degrees of freedom, \langle\xi(t)\rangle=0,\qquad\langle\xi(t)\xi(t^{\prime})\rangle=2D\,\delta(t-t^{\prime}). (2) Importantly, this noise term is not introduced phenomenologically but emerges inevitably from the radial–angular decomposition and averaging procedure, as detailed in Appendix A. The drift term f(r;\theta) encodes both linear instability induced by reentrant amplication and nonlinear saturation arising from homeostatic regulation, g(r)=\frac{1}{1+\kappa(r^{2}-1)} . The deterministic part of the radial flow admits a nontrivial fixed point r^{\ast} , determined by the balance between reentrant amplification and homeostatic curvature. Expanding around this fixed point, x(t)\equiv r(t)-r^{\ast}, (3) the dynamics reduces to a local polynomial form, \dot{x}=a_{1}(\theta)\,x+a_{2}(\theta)\,x^{2}+a_{3}(\theta)\,x^{3}+\cdots+\xi(t), (4) where the coefficients a_{n}(\theta) are smooth functions of the underlying structural parameters \theta , including the reentry gain and homeostatic curvature (See the details in Appendix B). A key result of the microscopic analysis is that the linear coefficient a_{1}(\lambda,\kappa)=-\frac{2(\kappa+\lambda-1)}{\lambda} (5) vanishes along a codimension-one manifold. Introducing the deviation from criticality \Delta\equiv\lambda-1, (6) this marginal-stability manifold is given by \kappa+\Delta=0 . Thus, the location of the dynamical critical surface emerges naturally from the structure of the reflective homeostatic dynamics, rather than being imposed by external tuning. MSRJD formulation and renormalization structure —To analyze fluctuation effects and adaptive dynamics on equal footing, we formulate Eq. (4) within the Martin–Siggia–Rose–Janssen–De Dominicis (MSRJD) formalism 24 ; 25 ; 26 . In this representation, the stochastic dynamics is expressed exactly as a path integral over the state variable x(t) and an auxiliary response field \tilde{x}(t) , with action \displaystyle S[x,\tilde{x};\theta] \displaystyle=\int dt\;\tilde{x}(t)\big(\dot{x}(t)-f(x(t);\theta)\big)-D\int dt\;\tilde{x}(t)^{2}. (7) The MSRJD action encodes both the deterministic drift and stochastic fluctuations, and serves as the starting point for all subsequent analytical developments. A central advantage of the MSRJD formulation is that it exposes the structural role of fluctuations and response within a single theoretical framework, as illustrated in Fig. 1(b). Notably, the same action supports two distinct but complementary renormalization procedures. First, conventional Wilsonian coarse-graining over fast fluctuations of x and \tilde{x} generates loop corrections that renormalize the effective couplings a_{1} and a_{3} , thereby determining the stability of the dynamical critical surface under noise. Second, when the structural parameters \theta are allowed to evolve slowly in time, the response sector of the action induces an intrinsic flow of couplings driven by sensitivity and susceptibility. In this sense, the response field \tilde{x} plays a dual role. It governs the linear response of the system to external perturbations, and simultaneously mediates an internal renormalization of structure when parameters are adaptive. This unified perspective allows us to disentangle two logically distinct questions. Loop renormalization determines whether a critical manifold, once approached, is stable against fluctuations, while response-driven parameter flow determines whether the dynamics is attracted toward the vicinity (or edge) of that manifold in the absence of external fine tuning. As we show in the following sections, reflective homeostatic dynamics realizes both mechanisms within the same theoretical framework, leading to a critical state that is both fluctuation-robust and dynamically selected. Loop renormalization and protected mean-field criticality —We examine the stability of the critical manifold under stochastic fluctuations by performing a controlled Wilsonian loop expansion of the MSRJD action, as detailed in Appendix C. The central issue is whether the critical surface identified at the deterministic mean-field level survives once fluctuations are integrated out, or whether it is destabilized by infrared divergences, as often occurs in low-dimensional interacting systems. To this end, we linearize the drift term around the origin, f(x;\theta)\approx a_{1}x, (8) and decompose the action into a Gaussian part and an interaction, S=S_{0}+S_{\mathrm{int}}, (9) with \displaystyle S_{0} \displaystyle=\int dt\;\tilde{x}(t)\big(\dot{x}(t)-a_{1}x(t)\big)-D\int dt\;\tilde{x}(t)^{2}, (10) \displaystyle S_{\mathrm{int}} \displaystyle=\int dt\;\tilde{x}(t)\big(-a_{2}x(t)^{2}-a_{3}x(t)^{3}\big). The Gaussian theory defined by S_{0} yields the bare response and correlation functions, G_{R}(\omega)=\frac{1}{-i\omega+a_{1}},\qquad G_{C}(\omega)=\frac{2D}{\omega^{2}+a_{1}^{2}}, (11) where G_{R}(\omega)=\langle x(\omega)\tilde{x}(-\omega)\rangle_{0} and G_{C}(\omega)=\langle x(\omega)x(-\omega)\rangle_{0} . As the critical surface a_{1}\to 0 is approached, the static susceptibility diverges as \chi\sim|a_{1}|^{-1} , reflecting the growing temporal correlations characteristic of critical slowing down. At the level of naive perturbation theory, the leading fluctuation correction generated by the cubic interaction takes the form \delta a_{1}\sim-a_{3}\int\frac{d\omega}{2\pi}\,G_{C}(\omega), which diverges as \delta a_{1}\sim-a_{3}D/|a_{1}| in the limit a_{1}\to 0 . Taken at face value, this infrared divergence would suggest that fluctuations destabilize the critical surface, as depicted in Fig. 2(a). However, this conclusion is premature, as it ignores the Wilsonian structure of the renormalization procedure. In a Wilsonian RG step, only fast modes in a thin frequency shell \Lambda/b<|\omega|<\Lambda are integrated out. At one-loop order, the resulting correction to the linear coefficient is \delta a_{1}=-3a_{3}\int_{\Lambda/b<|\omega|<\Lambda}\frac{d\omega}{2\pi}\,G_{C}(\omega)+\cdots, (12) where the numerical prefactor arises from causal contractions. For a thin shell, this integral evaluates to \int_{\Lambda/b<|\omega|<\Lambda}\frac{d\omega}{2\pi}\,G_{C}(\omega)\simeq\frac{2D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}\,d\ell, (13) which remains finite at any fixed RG scale. The apparent infrared divergence instead emerges only when the RG flow is iterated toward the critical surface. Crucially, in reflective homeostatic dynamics the cubic coupling a_{3} is not an independent parameter. Rather, it encodes a curvature constraint that becomes increasingly effective as the activity amplitude grows. As illustrated in Fig. 2(b), this nonlinear saturation generates a finite characteristic amplitude scale, x_{\mathrm{typ}}^{2}\sim-a_{1}/a_{3}, which acts as a self-consistent infrared cutoff. As a result, the same homeostatic mechanism that bounds trajectories at the deterministic level also regularizes the infrared sector of the field theory, preventing runaway fluctuation-induced instabilities, in Fig. 2(c). Collecting the tree-level scaling with the one-loop correction and expressing the result in terms of its infrared scaling structure, the flow of the linear coupling can be summarized by an effective beta function of the form \beta_{a_{1}}:=\frac{da_{1}}{d\ell}\sim-a_{1}+c\,\frac{a_{3}D}{|a_{1}|}+\cdots, (14) where \ell denotes the logarithmic coarse-graining scale and c>0 is a nonuniversal constant. This expression should be understood as an infrared scaling form rather than an exact Wilsonian beta function; while subleading terms depend on the regularization scheme, the qualitative structure of the flow is robust. As a consequence, the dynamical condition a_{1}=0 , corresponding to a locally marginal relaxation rate, is neither shifted nor destroyed by loop corrections, but instead remains marginally stable. Mean-field scaling is preserved: fluctuations renormalize amplitudes but do not generate anomalous critical exponents. We therefore refer to this regime as a protected mean-field critical manifold . While the loop expansion is naturally expressed in terms of the local normal-form coefficients (a_{1},a_{3}) , the underlying structural control parameters of the reflective dynamics are the reentry gain \lambda and the homeostatic curvature \kappa . Near the critical manifold, these parameters are related by Eq. (5), so that the vanishing of the local linear coefficient a_{1} corresponds to the condition \kappa+\Delta=0 in the underlying structural parameter space. The loop-induced renormalization of a_{1} can thus be reinterpreted as a renormalization of the deviation from criticality \Delta . After absorbing scheme-dependent constant shifts into a rescaling of time, the Wilsonian flow assumes a universal normal form. Introducing a dimensionless deviation \tilde{\Delta} , defined by evaluating nonuniversal prefactors on a fixed reference slice of the structural parameter space (e.g. \kappa=1 ), the resulting beta function reads \beta_{\tilde{\Delta}}=\tilde{\Delta}-\tilde{\Delta}^{\,2}+\mathcal{O}(\tilde{\Delta}^{\,3}), (15) demonstrating that the critical surface remains infrared attractive and marginally stable, independent of the details of infrared regularization. The flow of the homeostatic curvature \kappa is induced by the renormalization of the cubic response vertex, which controls the effective curvature of the radial restoring force. In our scheme, \kappa is defined through the renormalized cubic coefficient a_{3}^{R} , so that fluctuations renormalizing the -\tilde{x}x^{3} interaction directly translate into a flow of \kappa . At one loop, mixed and self-interaction diagrams involving the quadratic and cubic vertices generate corrections to a_{3} , and, through this identification, induce a curvature flow driven by critical fluctuations (See the details in Appendix D). As a result, the beta function for \kappa takes the generic normal-form structure \beta_{\kappa}=\alpha_{1}(\kappa-\kappa_{0})+\alpha_{2}\,\tilde{\Delta}+\alpha_{3}\,\tilde{\Delta}^{\,2}+\cdots, (16) where the coefficients \alpha_{i} are determined by explicit one-loop vertex diagrams and depend on the microscopic noise strength and cutoff. On the critical manifold \tilde{\Delta}=0 , the curvature flows toward a finite fixed value \kappa_{0} , ensuring bounded radial fluctuations and stabilizing the reflective shell. Taken together, these results establish that loop renormalization preserves the existence and structure of the reflective critical manifold, but does not by itself select a unique operating point along it. In the following section, we show that this remaining degeneracy is lifted dynamically: response-driven structural adaptation generates an intrinsic flow in (\Delta,\kappa) space that actively attracts the system toward a specific point on this protected manifold, giving rise to self-organized criticality without external fine tuning. Figure 2: Infrared regularization by homeostatic curvature. (a) Bare correlation propagator G_{C}(\omega) of the Gaussian theory, which diverges in the infrared as a_{1}\to 0 . (b) Nonlinear saturation encoded in the curvature a_{3} generates a finite characteristic amplitude scale, x_{\mathrm{typ}}^{2}\sim-a_{1}/a_{3}, which provides an effective infrared cutoff. (c) As a result, the loop integral contributing to \delta a_{1} is regulated self-consistently, preventing destabilization of the critical surface. Response-driven structural dynamics —The loop analysis establishes that the critical surface is robust once it is reached. We now address a distinct and complementary question: how does the system arrive at this surface in the absence of external fine tuning? To answer this, we explicitly incorporate external perturbations and slow structural adaptation into the reduced description. The reduced dynamics takes the form \dot{x}(t)=f\!\big(x(t);\theta\big)+h(t)+\xi(t), (17) where h(t) is a slowly varying external input or effective low-frequency drive, representing either environmental perturbations or internally generated reentrant signals. Retaining the leading nonlinearities compatible with bounded activity, the drift admits a generic normal form, f(x;\theta)=a_{1}(\theta)\,x-a_{3}(\theta)\,x^{3}+\mathcal{O}(x^{5}) . To characterize how the system responds to external inputs, we again employ the MSRJD formalism, now retaining the explicit dependence on the source field h(t) . A defining feature of this representation is that the response field \tilde{x}(t) is conjugate to the external input. Functional differentiation with respect to h(t) yields the linear response kernel, R(t,t^{\prime}):=\frac{\delta\langle x(t)\rangle}{\delta h(t^{\prime})}\bigg|_{h=0}=\langle x(t)\,\tilde{x}(t^{\prime})\rangle. (18) The response field thus provides a direct measure of the system’s sensitivity to external perturbations, which becomes strongly enhanced near the dynamically marginal regime ( a_{1}\to 0 ) identified in the loop analysis. So far, the structural parameters \theta have been treated as fixed. In adaptive reentrant systems, however, these parameters evolve slowly in response to activity and input. To capture this effect, we allow \theta to vary on a time scale much longer than that of the fast dynamics of x(t) , \tau_{\theta}\gg\tau_{x}. (19) Within this separation of scales, the fast variables (x,\tilde{x}) equilibrate quasi-statically for fixed \theta , while the structural parameters evolve under averaged response-driven forces. A natural and minimal assumption, consistent with the MSRJD formulation, is that the slow evolution of \theta follows the gradient of the action, \dot{\theta}=-\eta\,\frac{\delta S}{\delta\theta},\qquad\eta>0, (20) which yields the response-weighted adaptation rule \dot{\theta}=\eta\;\tilde{x}(t)\,\partial_{\theta}f\!\big(x(t);\theta\big). (21) Averaging over the fast stochastic dynamics produces an effective deterministic flow in parameter space, \langle\dot{\theta}\rangle=\eta\;\big\langle\tilde{x}\,\partial_{\theta}f(x;\theta)\big\rangle. (22) This flow is qualitatively distinct from conventional loop renormalization. While loop corrections describe how fluctuations renormalize couplings at fixed structure, Eq. ( 22 ) describes how the structure itself is dynamically reshaped by response and sensitivity. Response-driven flows toward the critical manifold —We now specialize the general response-driven framework to the radial dynamics associated with reflective homeostatic reentry. As established in prior work 14 , the reduced radial flow takes the form \dot{r}=f(r;\lambda,\kappa)=r\Big[-1+\frac{\lambda}{1+\kappa(r^{2}-1)}\Big], (23) where \lambda controls the effective reentry gain and \kappa>0 sets the strength of global homeostatic curvature. We define the distance to criticality as \Delta=\lambda-1 . In the absence of noise and external input, the nontrivial fixed point of Eq. ( 23 ) satisfies r_{\ast}^{2}=1+\frac{\Delta}{\kappa}, (24) so that the critical manifold \Delta=0 corresponds to a shell of unit radius, r_{\ast}=1 . To quantify the response entering the structural flows, we linearize the radial dynamics around the shell, r(t)=r_{\ast}+\delta r(t) . To leading order one obtains \delta\dot{r}=a(\lambda,\kappa)\,\delta r+h(t)+\xi(t), (25) with a(\lambda,\kappa)=\partial_{r}f(r;\lambda,\kappa)\big|_{r=r_{\ast}}=-\frac{2\kappa r_{\ast}^{2}}{\lambda}. (26) For \kappa>0 , the shell is linearly stable. The resulting Ornstein–Uhlenbeck process yields a stationary variance \mathrm{Var}[r]=\langle(\delta r)^{2}\rangle=\frac{D_{\mathrm{tot}}}{-a(\lambda,\kappa)}, (27) where D_{\mathrm{tot}} includes both intrinsic noise and the effective power of slow external drive (See the details in Appendix E). Near criticality ( \lambda\approx 1 ), this reduces to \mathrm{Var}[r]\approx\frac{D_{\mathrm{tot}}}{2(\kappa+\Delta)}. (28) Equation ( 28 ) highlights the dual role of \kappa : it stabilizes the shell while simultaneously controlling its fluctuation thickness. We first consider the slow adaptation of the reentry gain \lambda . As discussed in the preceding section, the response-weighted learning rule yields \langle\dot{\lambda}\rangle=\eta\,\big\langle\tilde{r}\,\partial_{\lambda}f(r;\lambda,\kappa)\big\rangle. (29) A minimal and physically transparent closure is to assume that adaptation acts to reduce deviations of the shell from the critical radius r=1 (See the details in Appendix F). Under time-scale separation, the fast dynamics concentrates near r_{\ast} , so that \big\langle r^{2}-1\big\rangle\approx r_{\ast}^{2}-1=\frac{\Delta}{\kappa}. (30) Consequently, the induced slow flow for \Delta=\lambda-1 takes the form \langle\dot{\Delta}\rangle\approx-c_{\Delta}\,\eta\,\frac{\Delta}{\kappa},\qquad c_{\Delta}>0, (31) implying that \Delta=0 is an attractive fixed point of the response-driven adaptation dynamics for any \kappa>0 . Thus the reentry gain is naturally tuned toward the critical manifold by sensitivity-weighted structural adaptation. We next consider the adaptation of the homeostatic curvature \kappa . Since \kappa controls the sensitivity of the gain to radial excursions, its slow evolution regulates the thickness of the radial shell. A minimal closure consistent with the MSRJD formulation is to drive \kappa toward a target fluctuation level \sigma_{\mathrm{tar}}^{2} , \langle\dot{\kappa}\rangle\propto\eta\,\big(\mathrm{Var}[r]-\sigma_{\mathrm{tar}}^{2}\big). (32) Substituting the variance ( 28 ) yields \langle\dot{\kappa}\rangle\approx c_{\kappa}\,\eta\Big(\frac{D_{\mathrm{tot}}}{2(\kappa+\Delta)}-\sigma_{\mathrm{tar}}^{2}\Big),\qquad c_{\kappa}>0. (33) When fluctuations exceed the target level, \kappa increases and tightens the shell, whereas insufficient fluctuations lead to a decrease of \kappa . This adaptive feedback suppresses runaway amplification while maintaining sensitivity. The coupled slow flows ( 31 ) and ( 33 ) admit a stable fixed point given by \Delta^{\ast}=0,\qquad\kappa^{\ast}=\frac{D_{\mathrm{tot}}}{2\sigma_{\mathrm{tar}}^{2}}. (34) At this point, the system operates at the edge of stability ( r_{\ast}=1 ) while maintaining a finite fluctuation thickness set by the balance between stochastic forcing and homeostatic regulation. Importantly, this operating point is reached without fine tuning of parameters: it emerges dynamically from response-driven adaptation under generic conditions. Figure 3 illustrates the slow structural flows in the (\Delta,\kappa) plane induced by response-driven adaptation. When only marginal loop renormalization is retained, trajectories are attracted toward the protected critical manifold \Delta=0 , forming a line attractor with no unique operating point. Including response-weighted structural dynamics lifts this degeneracy: the combined action of susceptibility-driven attraction and homeostatic stabilization focuses the flow toward a finite point on the critical manifold. Together, these flows demonstrate how reflective homeostatic dynamics self-organize toward criticality without external fine tuning. Figure 3: Response-driven flows in (\Delta,\kappa) space. (a) Loop renormalization preserves a marginally stable critical manifold at \Delta=0 . (b) Response-driven structural adaptation lifts this degeneracy and dynamically selects a unique edge-of-criticality fixed point, realizing self-organized criticality. Discussions —The central result of this work is the identification of two logically distinct, yet dynamically intertwined, mechanisms governing criticality in reflective homeostatic systems. On the one hand, conventional loop renormalization within the MSRJD field theory demonstrates that the mean-field critical surface is protected against infrared destabilization. On the other hand, response-driven structural dynamics actively selects this critical surface as an attractive operating point, without the need for external tuning. These two roles are conceptually orthogonal. Loop renormalization addresses a question of stability : given a critical manifold at the mean-field level, do fluctuations destroy it or shift it? By contrast, response-driven flows address a question of emergence : why should the system evolve toward this manifold in the first place? The present framework shows that reflective homeostatic dynamics realizes both robustness and selection within a single theoretical structure. It is instructive to compare the present mechanism with classical notions of self-organized criticality (SOC) 30 ; 31 ; 32 . In sandpile models and related systems, criticality emerges through slow driving and dissipation, typically relying on conservation laws or explicit separation between driving and relaxation scales. In such models, critical behavior is often identified retrospectively through scaling laws, while the underlying dynamical selection mechanism remains implicit. By contrast, in the reflective homeostatic framework studied here, criticality emerges through internal response-driven adaptation . Structural parameters evolve according to the system’s own susceptibility and response, encoded explicitly in the MSRJD response field. As a result, attraction to criticality is not imposed externally but arises as a dynamical consequence of reentrant amplification combined with homeostatic regulation. This places the present mechanism closer to a form of adaptive SOC , in which control parameters themselves evolve dynamically via internal response rather than external driving.. The preservation of mean-field scaling despite the presence of fluctuations is a nontrivial feature of the present theory. Ordinarily, one would expect infrared divergences to renormalize critical exponents in low-dimensional systems. Here, however, the same nonlinearities that stabilize activity amplitudes also act as a self-consistent infrared regulator. This leads to a scenario in which fluctuations renormalize amplitudes and response strengths but leave the qualitative structure of the critical manifold intact. Importantly, this protection does not rely on symmetry, dimensionality, or fine-tuning. Instead, it emerges dynamically from the interplay between reentrant gain and homeostatic curvature. This mechanism may therefore be relevant to a broader class of adaptive recurrent systems beyond the specific model studied here. From a computational perspective, the results suggest a principled route by which reentrant systems can operate near maximal sensitivity while remaining stable. The critical manifold corresponds to a regime of enhanced responsiveness, long correlation times, and flexible amplification, while homeostatic regulation ensures bounded activity. Such properties are widely associated with efficient information processing and adaptive behavior in biological neural systems. More broadly, the present framework provides a concrete field-theoretic bridge between dynamical systems models of recurrence and statistical descriptions of criticality. By embedding learning and adaptation directly into the response sector of the theory, it offers a route toward unifying stability analysis, fluctuation theory, and self-organization within a single mathematical language. Conclusion —We have shown that reflective homeostatic dynamics provides a minimal and self-consistent mechanism for the emergence of self-organized criticality in reentrant systems. Starting from a reduced stochastic description, we demonstrated within the MSRJD field-theoretic framework that fluctuation effects do not destabilize the critical manifold; instead, loop corrections are dynamically regularized by homeostatic curvature, yielding a protected mean-field critical surface that remains marginally stable under coarse-graining. Beyond robustness, we identified a complementary mechanism whereby response-driven structural adaptation generates intrinsic flows of the control parameters, attracting the system toward this critical manifold without external fine-tuning. The resulting operating point lies at the edge of stability, characterized by bounded activity and finite fluctuations set by the balance between stochastic forcing and homeostatic regulation. Together, these results establish reflective homeostatic systems as a concrete class in which robustness to fluctuations and dynamic self-organization toward criticality arise from the same underlying structure, unifying loop renormalization and adaptive response within a single theoretical framework. Acknowledgements —This work was partially supported by the Institute of Information & Communications Technology Planning & Evaluation (IITP) grant funded by the Korea government (MSIT) (IITP-RS-2025-02214780). The author acknowledges the support of ChatGPT (GPT-5, OpenAI) for assistance in literature review and conceptual structuring during early development. End Matter Appendix A Appendix A: Elimination of angular degrees of freedom and emergence of stochastic radial dynamics We consider a deterministic dynamical system in \mathbb{R}^{N} , \dot{\mathbf{x}}(t)=\mathbf{F}(\mathbf{x}),\qquad\mathbf{x}\in\mathbb{R}^{N}, (S1) which represents the full reentrant dynamics prior to coarse-graining. In the FHRN construction, \mathbf{F} includes the reentrant operator, nonlinear activation, and global homeostatic normalization. (I) Radial–angular decomposition : We introduce polar coordinates in state space, \mathbf{x}(t)=r(t)\,\mathbf{n}(t),\qquad r(t)=\|\mathbf{x}(t)\|,\qquad\|\mathbf{n}(t)\|=1. (S2) Taking a time derivative yields the identity \dot{\mathbf{x}}=\dot{r}\,\mathbf{n}+r\,\dot{\mathbf{n}}. (S3) Projecting the dynamics parallel and orthogonal to \mathbf{n} gives \displaystyle\dot{r} \displaystyle=\mathbf{n}\cdot\mathbf{F}(r\mathbf{n}), (S4) \displaystyle r\,\dot{\mathbf{n}} \displaystyle=\mathbf{F}(r\mathbf{n})-\big(\mathbf{n}\cdot\mathbf{F}(r\mathbf{n})\big)\mathbf{n}. (S5) (II) Isotropy and angular averaging : A defining structural assumption of the FHRN dynamics is isotropy: \mathbf{F}(R\mathbf{x})=R\,\mathbf{F}(\mathbf{x}),\qquad\forall R\in O(N). (S6) Under this condition, the radial projection admits a decomposition \mathbf{n}\cdot\mathbf{F}(r\mathbf{n})=F_{r}(r)+\delta F(r,\mathbf{n}), (S7) where F_{r}(r):=\langle\mathbf{n}\cdot\mathbf{F}(r\mathbf{n})\rangle_{\mathbf{n}} (S8) denotes the angular average over the unit sphere, and \langle\delta F(r,\mathbf{n})\rangle_{\mathbf{n}}=0. (S9) Thus, the exact radial equation can be written as \dot{r}=F_{r}(r)+\delta F(r,\mathbf{n}(t)). (S10) (III) Time-scale separation and mixing of angular dynamics : Global homeostatic normalization ensures that the radial mode is strongly stabilized, r(t)\xrightarrow{t\to\infty}r_{\ast}, (S11) with a characteristic relaxation time \tau_{r} . In contrast, the angular dynamics ( S5 ) remain weakly constrained and generically exhibit fast mixing on the sphere. We assume a clear separation of time scales, \tau_{n}\ll\tau_{r}, (S12) where \tau_{n} is the angular correlation time. For |t-t^{\prime}|\gg\tau_{n} , angular correlations decay, \big\langle n_{i}(t)\,n_{j}(t^{\prime})\big\rangle\;\longrightarrow\;\frac{1}{N}\,\delta_{ij}. (S13) (IV) Averaging theorem and emergence of stochastic forcing : Equation ( S10 ) describes a slow variable r(t) driven by a rapidly fluctuating term \delta F(r,\mathbf{n}(t)) with zero mean and finite variance. Standard averaging results for deterministic systems with fast chaotic or mixing degrees of freedom imply that, in the limit \tau_{n}/\tau_{r}\to 0 , \delta F(r,\mathbf{n}(t))\;\Longrightarrow\;\xi(t), (S14) where \xi(t) is an effective Gaussian white noise. Collecting the above results, the coarse-grained radial dynamics take the form \dot{r}=F_{r}(r)+\xi(t). (S15) Appendix B Appendix B: Fixed-point expansion and local polynomial coefficients We consider the radial (scalar) stochastic ODE \dot{r}(t)=f(r(t))+\xi(t),\qquad f(r):=F(r;\lambda,\kappa)\,r, (S16) with F(r;\lambda,\kappa):=-1+\frac{\lambda}{1+\kappa(r^{2}-1)},\quad\Delta:=\lambda-1,\>\kappa>0. (S17) Define the auxiliary denominator D(r):=1+\kappa(r^{2}-1),\quad\Rightarrow\quad F(r)=-1+\lambda\,D(r)^{-1}. (S18) Assume a Gaussian white noise with \langle\xi(t)\rangle=0,\qquad\langle\xi(t)\xi(t^{\prime})\rangle=2D\,\delta(t-t^{\prime}), (S19) where D is the noise strength. We use x(\omega)=\int_{-\infty}^{\infty}dt\,e^{i\omega t}x(t),\qquad x(t)=\int\frac{d\omega}{2\pi}\,e^{-i\omega t}x(\omega), (S20) so that \partial_{t}\leftrightarrow-i\omega . (I) Fixed point r_{*} and local variable x=r-r_{*} : A nontrivial (“active shell”) fixed point with r_{*}\neq 0 is defined by \dot{r}=0\quad\Leftrightarrow\quad f(r_{*})=F(r_{*})r_{*}=0\quad\Leftrightarrow\quad F(r_{*})=0. (S21) Using ( S17 )–( S18 ), \displaystyle F(r_{*})=0\ \displaystyle\Longleftrightarrow\ -1+\frac{\lambda}{D(r_{*})}=0 \displaystyle\Longleftrightarrow\ r_{*}^{2}=1+\frac{\Delta}{\kappa}. (S22) Hence if \Delta>0 and \kappa>0 then r_{*}^{2}>1 and r_{*}>1 . Define the local fluctuation variable x(t):=r(t)-r_{*}\qquad\Rightarrow\qquad r(t)=r_{*}+x(t). (S23) Then ( S16 ) becomes \dot{x}(t)=f(r_{*}+x(t))+\xi(t), (S24) since \dot{r}=\dot{x} and r_{*} is constant. (II) Taylor expansion of the drift around r_{*} : Expand f(r) in Taylor series at r=r_{*} : f(r_{*}+x)=f(r_{*})+f^{\prime}(r_{*})x+\frac{1}{2}f^{\prime\prime}(r_{*})x^{2}+\frac{1}{6}f^{\prime\prime\prime}(r_{*})x^{3}+\cdots. (S25) Using f(r_{*})=F(r_{*})r_{*}=0 from ( S21 ), we obtain \dot{x}=a_{1}x+a_{2}x^{2}+a_{3}x^{3}+\cdots+\xi(t), (S26) with coefficients defined by a_{1}:=f^{\prime}(r_{*}),\qquad a_{2}:=\frac{1}{2}f^{\prime\prime}(r_{*}),\qquad a_{3}:=\frac{1}{6}f^{\prime\prime\prime}(r_{*}),\ \ldots (S27) (III) Compute a_{1}=f^{\prime}(r_{*}) explicitly (“bare mass/relaxation rate”) : Since f(r)=F(r)\,r , by the product rule f^{\prime}(r)=F^{\prime}(r)\,r+F(r). (S28) At the fixed point F(r_{*})=0 , thus a_{1}=f^{\prime}(r_{*})=F^{\prime}(r_{*})\,r_{*}. (S29) Now compute F^{\prime}(r) . From F(r)=-1+\lambda D(r)^{-1} , F^{\prime}(r)=\lambda\,\frac{d}{dr}\big(D(r)^{-1}\big). (S30) Using D(r)=1+\kappa(r^{2}-1) , D^{\prime}(r)=2\kappa r. (S31) By the chain rule, \frac{d}{dr}D^{-1}=-(D^{\prime})D^{-2}=-(2\kappa r)\,D^{-2}. (S32) Therefore F^{\prime}(r)=\lambda\big(-(2\kappa r)D^{-2}\big)=-2\lambda\kappa r\,D(r)^{-2}. (S33) At the fixed point, D(r_{*})=\lambda (from F(r_{*})=0 ), hence F^{\prime}(r_{*})=-2\lambda\kappa r_{*}\,\lambda^{-2}=-\frac{2\kappa r_{*}}{\lambda}. (S34) Plugging into ( S29 ), a_{1}=F^{\prime}(r_{*})\,r_{*}=-\frac{2\kappa r_{*}^{2}}{\lambda}. (S35) Using r_{*}^{2}=1+\Delta/\kappa , a_{1}(\lambda,\kappa)=-\frac{2(\kappa+\lambda-1)}{\lambda}. (S36) If \kappa>0 and \lambda>1 then a_{1}<0 , meaning the fixed point is linearly stable (IR attractive). Evaluating the higher-order coefficients at the fixed point r_{*} yields \displaystyle a_{2}(\lambda,\kappa) \displaystyle=\frac{\sqrt{\kappa(\kappa+\lambda-1)}}{\lambda^{2}}\big(4\kappa+\lambda-4\big), (S37) \displaystyle a_{3}(\lambda,\kappa) \displaystyle=-\frac{\kappa}{\lambda^{3}}\Big(\lambda^{2}+8(\kappa-1)(\kappa+\lambda-1)\Big). (S38) Appendix C Appendix C: Fluctuation-induced renormalization within the MSRJD formalism We work near the radial fixed point r_{*} and use the local field x(t):=r(t)-r_{*}. (S39) The stochastic dynamics (Langevin form) is \dot{x}(t)=a_{1}x(t)+a_{2}x(t)^{2}+a_{3}x(t)^{3}+\xi(t). (S40) Figure S1: One-loop correction to the linear coupling. (a) Cubic interaction vertex arising from the nonlinear drift term \tilde{x}a_{3}x^{3} in the MSRJD action. (b) Leading one-loop tadpole diagram contributing to the renormalization of the linear coupling a_{1} . The loop involves the correlation propagator G_{C} , while the external legs correspond to the response field \tilde{x} and the state variable x . Diagrammatic contribution is translated into an analytic expression, \delta a_{1}\propto-a_{3}\int(d\omega/2\pi)\,G_{C}(\omega) , which exhibits a formal infrared divergence as a_{1}\to 0 . (I) MSRJD functional integral : Equation ( S40 ) can be written as a constraint functional: \mathcal{E}[x,\xi](t):=\dot{x}(t)-a_{1}x(t)-a_{2}x(t)^{2}-a_{3}x(t)^{3}-\xi(t)=0. (S41) Introduce the functional delta to enforce ( S41 ): \delta\!\big[\mathcal{E}[x,\xi]\big]=\prod_{t}\delta\!\Big(\dot{x}-a_{1}x-a_{2}x^{2}-a_{3}x^{3}-\xi\Big). (S42) For Gaussian noise, the noise weight is \mathcal{P}[\xi]\propto\exp\!\left(-\frac{1}{4D}\int dt\,\xi(t)^{2}\right), (S43) since this reproduces \langle\xi(t)\xi(t^{\prime})\rangle=2D\delta(t-t^{\prime}) . Represent the delta functional by an auxiliary (response) field \tilde{x}(t) : \begin{split}&\delta\big[\mathcal{E}\big]\propto\\ &\int\mathcal{D}\tilde{x}\exp\!\left(\int dt\tilde{x}(t)\big[\dot{x}-a_{1}x-a_{2}x^{2}-a_{3}x^{3}-\xi\big]\right).\end{split} (S44) Combine ( S43 ) and ( S44 ): \begin{split}&\int\mathcal{D}\xi\;\exp\!\left(-\frac{1}{4D}\int dt\,\xi^{2}-\int dt\,\tilde{x}\,\xi\right)\\ &\propto\exp\!\left(-D\int dt\,\tilde{x}(t)^{2}\right),\end{split} (S45) since completing the square gives -\frac{1}{4D}\xi^{2}-\tilde{x}\xi=-\frac{1}{4D}\big(\xi+2D\tilde{x}\big)^{2}+D\tilde{x}^{2}. After integrating out \xi , the MSRJD action becomes S[x,\tilde{x}]=\int dt\;\Big[\tilde{x}\big(\dot{x}-a_{1}x-a_{2}x^{2}-a_{3}x^{3}\big)-D\tilde{x}^{2}\Big]. (S46) \tilde{x}(t) is the response (auxiliary) field. (II) Free theory: bare response and bare correlator : Split the action into Gaussian (free) + interaction: S=S_{0}+S_{\mathrm{int}}, (S47) with \begin{split}&S_{0}[x,\tilde{x}]=\int dt\;\Big[\tilde{x}(\dot{x}-a_{1}x)-D\tilde{x}^{2}\Big],\qquad\\ &S_{\mathrm{int}}[x,\tilde{x}]=\int dt\;\Big[-a_{2}\tilde{x}x^{2}-a_{3}\tilde{x}x^{3}\Big].\end{split} (S48) The bare response is defined as the free-theory contraction G_{0}(t-t^{\prime}):=\langle x(t)\tilde{x}(t^{\prime})\rangle_{0}. (S49) From S_{0} one finds the linear equation (\partial_{t}-a_{1})G_{0}(t-t^{\prime})=\delta(t-t^{\prime}) with retarded boundary condition, giving G_{0}(t-t^{\prime})=\Theta(t-t^{\prime})e^{a_{1}(t-t^{\prime})}. (S50) Fourier transform yields G_{0}(\omega)=\frac{1}{-i\omega-a_{1}}. (S51) Define the free correlator C_{0}(\omega):=\langle x(\omega)x(-\omega)\rangle_{0}. (S52) Using x(\omega)=G_{0}(\omega)\xi(\omega) in the equivalent Langevin picture and \langle\xi(\omega)\xi(\omega^{\prime})\rangle=2D(2\pi)\delta(\omega+\omega^{\prime}) , one obtains C_{0}(\omega)=2D\,|G_{0}(\omega)|^{2}=\frac{2D}{\omega^{2}+a_{1}^{2}}. (S53) (III) Vertices (interaction terms) : From S_{\mathrm{int}} we read off the vertices: \text{2-vertex}\,(V_{2}):-a_{2}\,\tilde{x}\,x^{2},\qquad\text{3-vertex}\,(V_{3}):-a_{3}\,\tilde{x}\,x^{3}. (S54) Every vertex carries one \tilde{x} and two/three x legs, respectively. (IV) Wilsonian step: split into slow/fast modes and integrate out fast shell : Introduce a UV frequency cutoff \Lambda and decompose fields: x=x_{<}+x_{>},\qquad\tilde{x}=\tilde{x}_{<}+\tilde{x}_{>}, (S55) where x_{>}(\omega),\tilde{x}_{>}(\omega) live in the shell \Lambda/b<|\omega|<\Lambda , b=e^{d\ell}\approx 1+d\ell, (S56) and x_{<},\tilde{x}_{<} contain modes |\omega|<\Lambda/b . The effective action for slow modes is defined by \begin{split}&e^{-S_{\mathrm{eff}}[x_{<},\tilde{x}_{<}]}\\ &:=\int\mathcal{D}x_{>}\mathcal{D}\tilde{x}_{>}\;e^{-S_{0}[x_{<}+x_{>},\tilde{x}_{<}+\tilde{x}_{>}]-S_{\mathrm{int}}[x_{<}+x_{>},\tilde{x}_{<}+\tilde{x}_{>}]}.\end{split} (S57) Expand perturbatively in S_{\mathrm{int}} : \begin{split}&S_{\mathrm{eff}}=S_{0}[x_{<},\tilde{x}_{<}]-\ln\Big\langle e^{-S_{\mathrm{int}}}\Big\rangle_{>}\\ &=S_{0}[x_{<},\tilde{x}_{<}]+\Big\langle S_{\mathrm{int}}\Big\rangle_{>}-\frac{1}{2}\Big(\big\langle S_{\mathrm{int}}^{2}\big\rangle_{>}-\big\langle S_{\mathrm{int}}\big\rangle_{>}^{2}\Big)+\cdots,\end{split} (S58) where \langle\cdots\rangle_{>} denotes averaging with the fast Gaussian measure S_{0}[x_{>},\tilde{x}_{>}] . (V) 1-loop renormalization of a_{1} from the a_{3} tadpole : We focus on the leading contribution from the cubic vertex S_{3}:=\int dt\,\big(-a_{3}\tilde{x}\,x^{3}\big). (S59) Insert the slow/fast split into S_{3} : -a_{3}\int dt\,(\tilde{x}_{<}+\tilde{x}_{>})\,(x_{<}+x_{>})^{3}. (S60) Expand the cube: (x_{<}+x_{>})^{3}=x_{<}^{3}+3x_{<}^{2}x_{>}+3x_{<}x_{>}^{2}+x_{>}^{3}. (S61) We now average over the fast fields. Because x_{>} is Gaussian with zero mean, \langle x_{>}(t)\rangle_{>}=0,\qquad\langle x_{>}^{3}\rangle_{>}=0. (S62) Thus in \langle S_{3}\rangle_{>} , only terms involving x_{>}^{2} survive: \begin{split}&\big\langle S_{3}\big\rangle_{>}=\\ &-a_{3}\int dt\,\Big[\tilde{x}_{<}\,\big\langle 3x_{<}x_{>}^{2}\big\rangle_{>}\ +\ \tilde{x}_{>}\,\big\langle 3x_{<}x_{>}^{2}\big\rangle_{>}\ +\ \cdots\Big],\end{split} (S63) where \cdots denotes terms that vanish by odd moments or do not contribute to the slow effective action after integrating out \tilde{x}_{>} . Keeping the slow operator structure \tilde{x}_{<}x_{<} , \big\langle S_{3}\big\rangle_{>}\supset-3a_{3}\int dt\;\tilde{x}_{<}(t)\,x_{<}(t)\;\underbrace{\big\langle x_{>}(t)^{2}\big\rangle_{>}}_{=:\langle x^{2}\rangle_{>}}. (S64) In the slow action, the linear term is \int dt\,\tilde{x}_{<}\big(\dot{x}_{<}-a_{1}x_{<}\big). (S65) A correction of the form -\int dt\,(\delta a_{1})\,\tilde{x}_{<}x_{<} is equivalent to shifting a_{1}\to a_{1}+\delta a_{1} . Comparing with ( S64 ), we identify \delta a_{1}=3a_{3}\,\langle x^{2}\rangle_{>}. (S66) (The overall sign can flip depending on the \tilde{x} convention; the structure and the factor 3 from combinatorics are robust.) The fast-mode equal-time variance is \langle x^{2}\rangle_{>}:=\langle x_{>}(t)x_{>}(t)\rangle_{>}=\int_{\Lambda/b<|\omega|<\Lambda}\frac{d\omega}{2\pi}\;C_{0}(\omega), (S67) where C_{0}(\omega) is the bare correlator ( S53 ): C_{0}(\omega)=\frac{2D}{\omega^{2}+a_{1}^{2}}. (S68) Therefore \langle x^{2}\rangle_{>}=\int_{\Lambda/b<|\omega|<\Lambda}\frac{d\omega}{2\pi}\;\frac{2D}{\omega^{2}+a_{1}^{2}}. (S69) Using symmetry in \omega , \int_{\Lambda/b<|\omega|<\Lambda}d\omega\,(\cdots)=2\int_{\Lambda/b}^{\Lambda}d\omega\,(\cdots), (S70) we obtain \langle x^{2}\rangle_{>}=\frac{2D}{2\pi}\cdot 2\int_{\Lambda/b}^{\Lambda}\frac{d\omega}{\omega^{2}+a_{1}^{2}}=\frac{2D}{\pi}\int_{\Lambda/b}^{\Lambda}\frac{d\omega}{\omega^{2}+a_{1}^{2}}. (S71) Define I:=\int_{\Lambda/b}^{\Lambda}\frac{d\omega}{\omega^{2}+a_{1}^{2}}. (S72) For a thin shell, approximate the integrand by its value near \omega=\Lambda : I\approx\frac{1}{\Lambda^{2}+a_{1}^{2}}\int_{\Lambda/b}^{\Lambda}d\omega=\frac{\Lambda-\Lambda/b}{\Lambda^{2}+a_{1}^{2}}=\frac{\Lambda(1-1/b)}{\Lambda^{2}+a_{1}^{2}}. (S73) With b=e^{d\ell} , we have 1/b=e^{-d\ell}\approx 1-d\ell , hence 1-\frac{1}{b}\approx d\ell, (S74) and therefore I\approx\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}\,d\ell. (S75) Substituting into ( S71 ) gives \langle x^{2}\rangle_{>}\approx\frac{2D}{\pi}\,\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}\,d\ell. (S76) From ( S66 ) and ( S76 ), \delta a_{1}\approx 3a_{3}\cdot\frac{2D}{\pi}\,\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}\,d\ell. (S77) Hence the 1-loop contribution to the beta function is \beta_{a_{1}}^{(1)}:=\frac{da_{1}}{d\ell}\Big|_{\mathrm{1-loop}}\approx 3a_{3}\cdot\frac{2D}{\pi}\,\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}. (S78) In 0+1D, the shell integral typically yields a cutoff-dependent factor \sim\Lambda/(\Lambda^{2}+a_{1}^{2}) rather than a universal logarithm. The Wilsonian step is well-defined, but numerical coefficients can be scheme/cutoff sensitive. (VI) Tree-level rescaling contribution : If we rescale time as t^{\prime}=bt with b=e^{d\ell} , then \partial_{t}=b\,\partial_{t^{\prime}} . Keeping the kinetic structure \tilde{x}\,\dot{x} fixed without field rescaling implies the drift coefficient scales as a_{1}^{\prime}=b\,a_{1}, (S79) so \beta_{a_{1}}^{(\mathrm{tree})}=\frac{da_{1}}{d\ell}\Big|_{\mathrm{tree}}=a_{1}. (S80) Thus a minimal combined flow reads \beta_{a_{1}}=a_{1}+3a_{3}\cdot\frac{2D}{\pi}\,\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}+\cdots, (S81) where \cdots denotes additional 1-loop terms (e.g. from a_{2} ) and possible D renormalization. (VII) Derivation of the \Delta -beta function near the critical manifold : We parameterize \lambda=1+\Delta,\qquad\kappa=1+\varepsilon,\qquad|\Delta|,|\varepsilon|\ll 1. (S82) The condition \lambda=1 defines the critical shell location in the reduced description. The homeostatic curvature \kappa remains a physical structural parameter; in the following we evaluate nonuniversal prefactors at a fixed reference value \kappa=1 in order to present the resulting flow in a canonical normal form. At \kappa=1 , the cubic coefficient admits the expansion a_{3}(\kappa=1)=-1+\Delta-\Delta^{2}+\mathcal{O}(\Delta^{3}). (S83) We then define the dimensionless deviation from criticality as \tilde{\Delta}:=g_{\mathrm{eff}}\,\Delta,\qquad g_{\mathrm{eff}}=\frac{6D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}, (S84) where g_{\mathrm{eff}} collects nonuniversal factors arising from the Wilsonian shell integration. With this definition, the beta function assumes the canonical normal form \beta_{\tilde{\Delta}}=\frac{d\tilde{\Delta}}{d\ell}=\tilde{\Delta}-\tilde{\Delta}^{\,2}+\mathcal{O}(\tilde{\Delta}^{\,3}), (S85) demonstrating that the critical manifold remains infrared attractive and marginally stable at one-loop order. Appendix D Appendix D: Translating the cubic-vertex RG Flow to \beta_{\kappa} and extracting \alpha_{i} We expand near the scheme/reference point (\lambda,\kappa)=(1,1),\quad\lambda=1+\Delta,\quad\kappa=1+\varepsilon,\quad|\Delta|,|\varepsilon|\ll 1. (S86) We use the (scheme) condition that defines the renormalized cubic vertex at the reference point: a_{3}^{R}(\Delta=0,\kappa=1)\equiv-1\quad\text{for all RG scales }\ell. (S87) The one-loop renormalization of a_{3} comes from the connected cumulant \frac{1}{2}\langle S_{\text{int}}^{2}\rangle_{c} (the mean \langle S_{\text{int}}\rangle only generates tadpoles that renormalize a_{1} or induce a shift of the mean). At one loop, the 1PI correction to \Gamma^{(1,3)} receives contributions from the following topologies: (I) a_{2}a_{3} mixed vertex correction : One V_{2} and one V_{3} vertex can combine to generate an effective \tilde{x}x^{3} operator after contracting fast legs. The corresponding one-loop contribution has the schematic structure \delta a_{3}\big|_{a_{2}a_{3}}=c_{23}^{(1)}\,a_{2}a_{3}\,I_{23}^{(1)}, (S88) where the shell integral at the static renormalization point is I_{23}^{(1)}:=\int_{\text{shell}}\frac{d\omega}{2\pi}\,G_{0}(\omega)\,C_{0}(\omega), (S89) and c_{23}^{(1)} is the combinatorial factor (number of distinct contractions producing \tilde{x}x^{3} ). Using G_{0}(\omega)C_{0}(\omega)=\frac{2D}{(-i\omega-a_{1})(\omega^{2}+a_{1}^{2})}, (S90) the shell integral yields (thin-shell approximation) I_{23}^{(1)}\simeq\frac{2D}{\pi}\,\frac{(-a_{1})\Lambda}{(\Lambda^{2}+a_{1}^{2})^{2}}\,d\ell.\quad (S91) Odd imaginary part cancels in symmetric shell. (II) a_{2}^{2} induced cubic vertex via shift removal : The quadratic vertex V_{2} generically generates a nonzero mean (a “tadpole” in the equation of motion). After removing the mean by a field shift x\to x+\bar{x} (so that \langle x\rangle=0 ), an effective cubic operator is induced. This effect is captured by \delta a_{3}\big|_{\text{shift}}=c_{22}^{(1)}\,a_{2}^{2}\,I_{22}^{(1)}, (S92) with a shell integral of the form I_{22}^{(1)}:=\int_{\text{shell}}\frac{d\omega}{2\pi}\,C_{0}(\omega)\simeq\frac{2D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}\,d\ell. (S93) (Here c_{22}^{(1)} depends on the precise convention for shift subtraction, but becomes unique once the “ \langle x\rangle=0 ” renormalization condition is imposed.) (III) a_{3}^{2} one-loop vertex correction : Two V_{3} vertices also contribute to \Gamma^{(1,3)} at one loop. The schematic form is \delta a_{3}\big|_{a_{3}^{2}}=c_{33}^{(1)}\,a_{3}^{2}\,I_{33}^{(1)}, (S94) where the basic building block integral at zero external frequency is I_{33}^{(1)}:=\int_{\text{shell}}\frac{d\omega}{2\pi}\,G_{0}(\omega)\,C_{0}(\omega)\;\;\;\text{(same scaling as $I_{23}^{(1)}$)}. (S95) In thin-shell form, I_{33}^{(1)}\simeq I_{23}^{(1)}\simeq\frac{2D}{\pi}\,\frac{(-a_{1})\Lambda}{(\Lambda^{2}+a_{1}^{2})^{2}}\,d\ell. (S96) (IV) One-loop beta function for a_{3} : Collecting one-loop contributions and including the tree-level scaling ( a_{3} has the same canonical time dimension as a_{1} in our convention), \begin{split}&\beta_{a_{3}}\equiv\frac{da_{3}}{d\ell}=\\ &a_{3}+c_{22}^{(1)}a_{2}^{2}I_{22}^{(1)}+c_{23}^{(1)}a_{2}a_{3}I_{23}^{(1)}+c_{33}^{(1)}a_{3}^{2}I_{33}^{(1)}+\mathcal{O}(\text{2-loop}).\end{split} (S97) All coefficients become unique once the renormalization conditions and vertex normalization plus the “ \langle x\rangle=0 ” shift-fixing condition are imposed. (V) Translation to \beta_{\kappa} and the coefficients \alpha_{i} : We expand near the reference point \lambda=1+\Delta,\qquad\kappa=1+\varepsilon,\qquad|\Delta|,|\varepsilon|\ll 1, (S98) and define the dimensionless deviation \tilde{\Delta} as in the previous section so that \beta_{\tilde{\Delta}}=\tilde{\Delta}-\tilde{\Delta}^{2}+\mathcal{O}(\tilde{\Delta}^{3}). (S99) Since a_{3}=a_{3}(\Delta,\kappa) , the chain rule gives \beta_{a_{3}}=\frac{\partial a_{3}}{\partial\Delta}\,\beta_{\Delta}+\frac{\partial a_{3}}{\partial\kappa}\,\beta_{\kappa}. (S100) At the scheme point (\Delta,\kappa)=(0,1) , condition (S87) enforces a_{3}^{R}\equiv-1 for all \ell , hence \beta_{a_{3}}\big|_{(0,1)}=0. (S101) Expanding Eq. ( S100 ) to first nontrivial orders in (\varepsilon,\tilde{\Delta}) yields the normal form \beta_{\kappa}=\alpha_{1}(\kappa-1)+\alpha_{2}\,\tilde{\Delta}+\alpha_{3}\,\tilde{\Delta}^{2}+\cdots, (S102) where the coefficients \alpha_{i} are obtained by matching the expansion of \beta_{a_{3}} . Concretely, at one loop, \alpha_{1},\alpha_{2},\alpha_{3} are linear combinations of (c_{22}^{(1)}a_{2}^{2}I_{22}^{(1)},\;c_{23}^{(1)}a_{2}a_{3}I_{23}^{(1)},\;c_{33}^{(1)}a_{3}^{2}I_{33}^{(1)}) evaluated near (\Delta,\kappa)=(0,1) , plus the scheme-fixed canonical scaling. Once a specific shift-fixing convention (e.g. enforcing \langle x\rangle=0 at each RG step) is implemented, the combinatorial coefficients c_{22}^{(1)},c_{23}^{(1)},c_{33}^{(1)} become uniquely determined, and the integrals I^{(1)} and I^{(2)} can be evaluated in closed form (or thin-shell approximations) to yield explicit numerical values for \alpha_{1},\alpha_{2},\alpha_{3} . (VI) Explicit one-loop computation of \alpha_{i} : At one loop, the cubic vertex receives corrections from mixed (a_{2}a_{3}) and self (a_{3}^{2}) diagrams. Collecting all contractions consistent with causality, the correction takes the form \delta a_{3}=\bigl(6a_{2}a_{3}+9a_{3}^{2}\bigr)\,I_{C}. (S103) Including tree-level scaling, we obtain \beta_{a_{3}}=\frac{da_{3}}{d\ell}=a_{3}+\bigl(6a_{2}a_{3}+9a_{3}^{2}\bigr)\,\frac{2D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}+\mathcal{O}(\text{2-loop}). (S104) The physical flow is defined by subtracting the reference-point contribution, \beta_{a_{3}}^{\mathrm{phys}}(\Delta,\kappa)=\beta_{a_{3}}(\Delta,\kappa)-\beta_{a_{3}}(0,1), (S105) which enforces condition (S87). Near the reference point in Eq. (S98), the expansion of a_{3}(\Delta,\kappa) yields \left.\frac{\partial a_{3}}{\partial\kappa}\right|_{(0,1)}=-9,\qquad\left.\frac{\partial a_{3}}{\partial\Delta}\right|_{(0,1)}=-5. (S106) Using Eq. (S99), we obtain the normal-form flow (S102), with one-loop coefficients \displaystyle\alpha_{1} \displaystyle=1-\frac{16D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}, (S107) \displaystyle\alpha_{2} \displaystyle=-\frac{20}{3}\,\frac{1}{g}\frac{2D}{\pi}\frac{\Lambda}{\Lambda^{2}+a_{1}^{2}}, (S108) \displaystyle\alpha_{3} \displaystyle=\text{scheme-dependent at one loop}. (S109) All coefficients are fully determined by the microscopic parameters (D,\Lambda,a_{1}) . Appendix E Appendix E: Stationary variance of the linearized radial dynamics In the vicinity of the stable shell, the radial fluctuations \delta r(t)=r(t)-r_{\ast} obey a linear stochastic differential equation of Ornstein–Uhlenbeck type, \delta\dot{r}(t)=a\,\delta r(t)+\xi(t), (S110) where a=a(\lambda,\kappa)<0 is the linear relaxation rate and \xi(t) denotes Gaussian white noise. Equation ( S110 ) is solved most transparently using an integrating factor. Multiplying both sides by e^{-at} yields \frac{d}{dt}\!\left(e^{-at}\,\delta r(t)\right)=e^{-at}\,\xi(t). (S111) Integrating from t^{\prime}=-\infty to t and imposing the stability condition a<0 , which ensures that contributions from the remote past decay, we obtain e^{-at}\,\delta r(t)=\int_{-\infty}^{t}dt^{\prime}\,e^{-at^{\prime}}\,\xi(t^{\prime}). (S112) Rearranging gives the causal solution \delta r(t)=\int_{-\infty}^{t}dt^{\prime}\,e^{a(t-t^{\prime})}\,\xi(t^{\prime}). (S113) This expression can be written compactly as a convolution with the retarded Green’s function, G_{R}(t-t^{\prime})=\Theta(t-t^{\prime})\,e^{a(t-t^{\prime})}, (S114) so that \delta r=G_{R}*\xi , consistent with the MSRJD response formalism. (I) Stationary variance : Using Eq. ( S113 ) and the noise correlator, the stationary variance is computed as \displaystyle\mathrm{Var}[\delta r] \displaystyle=\langle(\delta r(t))^{2}\rangle \displaystyle=\int_{-\infty}^{t}dt_{1}\int_{-\infty}^{t}dt_{2}\,e^{a(2t-t_{1}-t_{2})}\langle\xi(t_{1})\xi(t_{2})\rangle \displaystyle=2D_{\mathrm{tot}}\int_{-\infty}^{t}dt_{1}\,e^{2a(t-t_{1})} \displaystyle=2D_{\mathrm{tot}}\int_{0}^{\infty}ds\,e^{2as} \displaystyle=\frac{D_{\mathrm{tot}}}{-a}. (S115) The variance is finite provided a<0 , confirming that the shell is linearly stable and that fluctuations remain bounded. Appendix F Appendix F: OU linearization and MSRJD closure for learning-induced flow (I) Ornstein-Uhlenbeck (OU) linearization around the stable shell : Let r(t)=r_{*}+\delta r(t). (S116) Taylor-expand the drift: f(r_{*}+\delta r)=f(r_{*})+\partial_{r}f(r)\big|_{r_{*}}\,\delta r+O(\delta r^{2}). (S117) Since f(r_{*})=0 , dropping O(\delta r^{2}) yields the OU approximation: \delta\dot{r}(t)=a\,\delta r(t)+h(t)+\xi(t),\qquad a:=\partial_{r}f(r;\lambda,\kappa)\big|_{r=r_{*}}. (S118) One can compute a explicitly. Using the identity 1+\kappa(r_{*}^{2}-1)=\lambda , the standard algebra gives a=-\frac{2\kappa r_{*}^{2}}{\lambda}. (S119) Thus for \kappa>0 the shell is linearly stable ( a<0 ), and the OU relaxation time is \tau_{r}\sim|a|^{-1} . (II) Choice of teaching signal and reduction to \langle r^{2}-1\rangle : We choose a minimal homeostatic teaching/source term that penalizes deviation from the target shell r\simeq 1 : h(t)=h_{\rm teach}(t):=-\epsilon\,(r(t)^{2}-1),\qquad\epsilon>0, (S120) treated as slowly varying on the fast OU time scale. From the radial drift, \partial_{\lambda}f(r;\lambda,\kappa)=\frac{r}{1+\kappa(r^{2}-1)}. (S121) Expand around r=r_{*}+\delta r : \begin{split}&\partial_{\lambda}f(r)\approx B_{*}+B_{1}\,\delta r,\qquad B_{*}:=\partial_{\lambda}f(r_{*})=\frac{r_{*}}{\lambda},\qquad\\ &B_{1}:=\partial_{r}\partial_{\lambda}f(r)\big|_{r_{*}}.\end{split} (S122) The leading nontrivial contribution to \langle\tilde{r}\,\partial_{\lambda}f\rangle arises from the \delta r -dependent part (the constant part typically does not generate a nonzero stationary average under causal/Itô conventions without a drive): \langle\tilde{r}\,\partial_{\lambda}f\rangle\approx B_{1}\,\langle\tilde{r}\,\delta r\rangle. (S123) In OU, the mean fluctuation is given by linear response: \langle\delta r(t)\rangle=\int dt^{\prime}\,R(t,t^{\prime})\,\langle h(t^{\prime})\rangle. (S124) For slow h we apply the DC gain: \langle\delta r(t)\rangle\approx-\frac{1}{a}\,\langle h(t)\rangle. (S125) Heuristically (and consistently with quadratic MSRJD structure), the same retarded kernel controls the mixed response insertion, so the nontrivial part of \langle\tilde{r}\,\delta r\rangle scales with the same DC factor. We therefore parameterize \langle\tilde{r}\,\delta r\rangle=C_{\rm OU}\,\Big(-\frac{1}{a}\Big)\,\langle h\rangle,\qquad C_{\rm OU}>0, (S126) where C_{\rm OU} absorbs convention-dependent equal-time regularization (Itô/Stratonovich) and normalization constants. This is sufficient for determining the induced sign and leading scaling of the slow drift. Combining ( S123 ) and ( S126 ), \langle\tilde{r}\,\partial_{\lambda}f\rangle\approx B_{1}\,C_{\rm OU}\,\Big(-\frac{1}{a}\Big)\,\langle h\rangle. (S127) Using the teaching choice ( S120 ), \langle h\rangle=-\epsilon\,\langle r^{2}-1\rangle. (S128) Under time-scale separation and small noise (fast measure concentrated near r_{*} ), \langle r^{2}-1\rangle\approx r_{*}^{2}-1. (S129) Substituting ( S128 ) into ( S127 ) yields the desired reduction: \langle\tilde{r}\,\partial_{\lambda}f\rangle\;\propto\;-\langle r^{2}-1\rangle, (S130) where the proportionality constant is K_{\lambda}:=B_{1}\,C_{\rm OU}\,\Big(-\frac{1}{a}\Big)\,\epsilon, (S131) and can be restricted to the regime where K_{\lambda}>0 (stable shell, weak teaching, and our causal convention). (III) Induced slow flow for \Delta=\lambda-1 : From the learning drift with \theta=\lambda and ( S130 ), \langle\dot{\lambda}\rangle=\eta\,\langle\tilde{r}\,\partial_{\lambda}f\rangle\approx-\eta\,K_{\lambda}\,\langle r^{2}-1\rangle. (S132) Using the quasi-static closure ( S129 ), \langle r^{2}-1\rangle\approx r_{*}^{2}-1=\frac{\Delta}{\kappa}, (S133) we obtain the beta-function form \beta_{\Delta}(\Delta,\kappa):=\langle\dot{\Delta}\rangle=\langle\dot{\lambda}\rangle\approx-c_{\Delta}\,\eta\,\frac{\Delta}{\kappa},\qquad c_{\Delta}:=K_{\lambda}>0, (S134) implying the attractive sign structure (for \kappa>0 ): \Delta>0\Rightarrow\dot{\Delta}<0,\qquad\Delta<0\Rightarrow\dot{\Delta}>0, (S135) so \Delta=0 is an attractive fixed point of the slow learning flow.