The intermediate neutron capture process Preprint: arthur.choplin@ulb.be A. Choplin, L. Siess, S. Goriely, P. Eggenberger, F. D. Moyano Abstract Context. The intermediate neutron-capture process (i-process) can occur during proton ingestion events (PIEs), which may take place in the early evolutionary phases of asymptotic giant branch (AGB) stars. Aims. We investigate the impact of rotational and magnetic mixing on i-process nucleosynthesis in low-metallicity, low-mass AGB stars. Methods. We computed AGB models with [Fe/H] = − 2.5 -2.5 and − 1.7 -1.7 and initial masses of 1 and 1.5 M ⊙ M_{\odot} using the STAREVOL code, including a network of 1160 nuclei coupled to transport equations. Rotating models incorporate a calibrated Tayler-Spruit (TS) dynamo to account for core rotation rates inferred from asteroseismic observations of solar-metallicity sub-giants and giants. Initial rotation velocities of 0, 30, and 90 km s -1 were considered, along with varying assumptions for magnetic mixing. Results. Rotation without magnetic fields strongly suppresses the i-process due to the production of primary 14 N, which is subsequently converted into 22 Ne – a potent neutron poison during the PIE. Including magnetic fields via the TS dynamo restores the models close to their non-rotating counterparts: strong core-envelope coupling suppresses shear mixing and prevents primary 14 N synthesis, yielding i-process nucleosynthesis similar to non-rotating models. We also find that rotational mixing during the AGB phase is insufficient to affect the occurrence of PIEs. Conclusions. Proton ingestion event-driven nucleosynthesis proceeds similarly in asteroseismic-calibrated magnetic rotating AGB stars and non-rotating stars, producing identical abundance patterns. VI. Proton ingestion and i-process in rotating magnetic asymptotic giant branch stars 1 Introduction Understanding the chemical evolution of the Universe requires identifying the nucleosynthetic processes and their astrophysical sites. Elements heavier than iron are mainly produced through the slow (s) and rapid (r) neutron-capture processes, which occur at neutron densities of N_{n}\sim 10^{5} – 10^{10} and N_{n}>10^{20} cm -3 , respectively ( 2 , e.g.) . The s-process primarily takes place in asymptotic giant branch (AGB) stars and in the helium-burning cores of massive stars (e.g. 46 , and references therein) , while the r-process is associated with more extreme environments such as neutron star mergers, collapsars, or magnetorotational supernovae ( 1 ; 80 ; 68 , e.g.) . In addition to the s- and r-processes, an intermediate neutron-capture process (i-process) has been proposed ( 17 ) , operating at neutron densities of N_{n}\sim 10^{13} – 10^{16} cm -3 . Its existence is supported by stars showing chemical abundance patterns inconsistent with either the s- or r-process alone, but well reproduced by i-process models (r/s stars; e.g. 55 ; 66 ; 40 ; 35 ). Evidence for proton ingestion and i-process nucleosynthesis may also be present in the Sakurai object ( 5 ; 38 ) and in certain pre-solar grains ( 30 ; 44 ; 16 ) . Figure 1: Kippenhahn diagram illustrating key features of a PIE in a non-rotating 1 M_{\odot} , [Fe/H] =-2.5 AGB model, computed with the STAREVOL code. Grey regions indicate convective zones. The dashed green (blue) line marks the location of maximum H-burning (He-burning) energy. The colour map shows the neutron density. The time between the peak neutron density and the split is \Delta t_{1}\simeq 100 hr, while the total duration of the sequence shown is \Delta t_{2}\simeq 0.1 yr. The i-process can be triggered when protons are ingested into a convective helium-burning zone. This is expected in several astrophysical sites (see 14 , for a detailed list) , notably low-metallicity, low-mass AGB stars ( 39 ; 18 ; 74 ; 65 ; 15 , e.g.) . The proton ingestion event (PIE) mechanism is illustrated in Fig. 1 . During a PIE, at the beginning of the thermally pulsing AGB phase, protons are mixed into the convective thermal pulse, captured through 12 C( p,\gamma ) 13 N, and rapidly converted to 13 C via \beta -decay. The subsequent 13 C( \alpha,n ) 16 O reaction at \sim 250 MK produces neutron densities up to N_{n}\sim 10^{15} cm -3 , triggering an i-process nucleosynthesis and potentially leading to actinide production ( 12 ) . After the neutron density peak (green zone in Fig. 1 ), the i-process material is rapidly mixed throughout the entire thermal pulse, before it splits (at M_{\rm r}\simeq 0.52 and model \simeq 90235 in Fig. 1 ). The processed material is ultimately dredged into the envelope and expelled through stellar winds. Most AGB star models do not include rotation, although such stars as AGBs do rotate ( 79 , e.g.) . Rotation affects stellar evolution by distorting the stellar surface at high speeds and by driving instabilities that transport angular momentum (AM) and chemical elements ( 36 ; 47 , e.g.) . Early studies suggested that rotational mixing could create a 13 C-pocket ( 41 ) . However, detailed models showed that the pocket was too small to reproduce observed s-process enrichments and that extra 14 N synthesized thanks to rotation acts as a neutron poison, quenching s-process efficiency ( 37 ; 72 ; 70 ) . Later, 63 computed yields for rotating AGB stars and confirmed that rotation leads to the contamination of the 13 C-pocket by the poisonous 14 N. However, varying the initial rotation rates ( 10-120 km s -1 ) and mixing efficiencies, they showed that a wide range of abundance patterns can be obtained. Asteroseismic studies of sub-giant and red giant stars have revealed their internal and envelope rotation rates ( 6 ; 21 ; 19 ; 57 ; 25 ; 77 ; 32 ; 75 ; 43 ; 56 ; 24 , e.g.) . Comparisons with rotating models that include only AM transport by hydrodynamic instabilities provide too little coupling between the core and the envelope to reproduce the observed core rotation rates ( 28 ; 51 ; 10 ; 76 ; 9 ; 27 ; 26 ; 58 ) . This demonstrates that at least one additional, efficient AM transport mechanism is missing in the radiative zones of red giants. To match observed core rotation rates, 23 introduced an artificial, constant viscosity term in their solar metallicity, 2 M_{\odot} rotating AGB models. They found that s-process production remained similar to non-rotating cases due to the strong reduction of rotationally induced mixing. Motivated by the work of 31 , 29 proposed a modified version of the Tayler-Spruit (TS) dynamo ( 73 ) able to reproduce asteroseismic observations of sub-giant and red giant stars. This calibrated version better matches the core and surface rotation of low-mass ( 1.4-2 M_{\odot} ) Gamma Doradus pulsators ( 60 ) than models without magnetic fields ( 62 ) . Surface boron abundances in massive stars are also better accounted for when including the modified TS dynamo ( 3 ) . This study is the first to investigate the impact of rotation on i-process nucleosynthesis in AGB stars. To account for the asteroseismic constraints available for red giant stars, we implemented the modified TS dynamo proposed by 29 . Sect. 2 describes the models and physical ingredients, while Sect. 3 discusses the calibration of the dynamo. Results are presented in Sects. 4 and 5 , and conclusions are summarized in Sect. 6 . Table 1: Main characteristics of the models computed in this work. 1 1 1 Notes. Indicated are the model label, initial mass ( M_{\rm ini} ), [Fe/H] ratio, initial metallicity by mass fraction ( Z ), initial velocity at the zero-age main sequence, presence of magnetic fields (via the generalized TS dynamo; see Sect. 2.1 ), the C_{\rm T} constant, and the maximum neutron density reached during the PIE. Model label M_{\rm ini} [Fe/H] Z v_{\rm ini} Magnetic C_{\rm T} N_{\rm n,max} [ M_{\odot} ] [km s -1 ] [cm -3 ] M1.0z2.5_v00 1.0 -2.5 4.3\times 10^{-5} 0 NO 0 3.0e14 M1.0z2.5_v30 1.0 -2.5 4.3\times 10^{-5} 30 NO 0 8.1e13 M1.0z2.5_v30_CT1 1.0 -2.5 4.3\times 10^{-5} 30 YES 1 5.5e14 M1.0z2.5_v30_CT50 1.0 -2.5 4.3\times 10^{-5} 30 YES 50 8.5e14 M1.0z2.5_v30_CT216 1.0 -2.5 4.3\times 10^{-5} 30 YES 216 3.6e14 M1.0z2.5_v90_CT50 1.0 -2.5 4.3\times 10^{-5} 90 YES 50 2.2e14 M1.0z2.5_v90_CT216 1.0 -2.5 4.3\times 10^{-5} 90 YES 216 3.4e14 M1.0z1.7_v00 1.0 -1.7 2.7\times 10^{-4} 0 NO 0 2.9e14 M1.0z1.7_v30 1.0 -1.7 2.7\times 10^{-4} 30 NO 0 2.1e14 M1.0z1.7_v90_CT50 1.0 -1.7 2.7\times 10^{-4} 90 YES 50 1.7e14 M1.0z1.7_v90_CT216 1.0 -1.7 2.7\times 10^{-4} 90 YES 216 2.5e14 M1.5z1.7_v00 1.5 -1.7 2.7\times 10^{-4} 0 NO 0 3.3e14 M1.5z1.7_v90_CT50 1.5 -1.7 2.7\times 10^{-4} 90 YES 50 6.2e14 M1.5z1.7_v90_CT216 1.5 -1.7 2.7\times 10^{-4} 90 YES 216 7.2e14 Figure 2: Surface (dashed lines, \Omega_{\rm s} ) and core (solid lines, \Omega_{\rm c} ) rotation rates as a function of surface gravity for 1.1 M_{\odot} , solar-metallicity models with v_{\rm ini}=5 km s -1 . Models are computed without (black) and with the Tayler instability, using n=1 and various values of the calibration constant C_{\rm T} (green, red, and blue). The thick blue lines show the surface and core rotation of the 1.1 M_{\odot} , solar-metallicity model from 29 (E22) computed with GENEC ( n=1 , C_{\rm T}=216 ). Large black-filled (open) symbols indicate observed surface (core) rotation rates of sub-giant stars ( 20 ) , while the smaller black dots show core rotation rates of RGB stars ( 32 ) . 2 Physical inputs of the models The stellar models were computed with the STAREVOL code ( 69 ; 71 ; 34 , and references therein) . As a first step, 1.1 M_{\odot} solar-metallicity models were computed to calibrate rotational mixing efficiency (Sect. 3 ). Then, 1 and 1.5 M_{\odot} models at [Fe/H] =-2.5 and -1.7 , with 00 ), core-envelope coupling transfers AM outwards, causing the core rotation rate to steadily decrease rather than rise, as in non-magnetic rotating models. Figure 3 shows the angular velocity profiles of 1.0 M_{\odot} , [Fe/H] =-2.5 models with v_{\rm ini}=30 km s -1 at the beginning of the red giant branch (RGB) for different values of C_{T} . The non-magnetic case (black) exhibits strong core-envelope differential rotation ( \sim 5 dex), while in magnetic models the coupling strengthens with increasing C_{T} , leading to progressively slower core rotation rates. At fixed initial mass and metallicity, our models show comparable evolution through the main-sequence, RGB, and AGB phases, with similar thermal pulse properties and envelope masses, independently of the values of C_{T} and v_{\rm ini} . For example, in our seven [Fe/H] =-2.5 models, PIEs occur under nearly identical conditions and lead to similar i-process nucleosynthesis, except in the non-magnetic rotating case ( M1.0z2.5_v30 ; see Sect. 5.2.1 ). Importantly, we find that rotational mixing is too weak in all our rotating models to trigger the occurrence of PIEs on its own. As an example, we considered the M1.0z1.7_v90_CT216 model during the first thermal pulse and switched off overshooting, leading to no PIE occurring 2 2 2 Without additional mixing processes (e.g. overshoot), PIEs are expected in AGB models with M_{\rm ini}\lesssim 2.5 M_{\odot} and [Fe/H] <-2 ( 13 , Fig. 12 in) . . At the pulse maximum extent, the distance between the top of the convective pulse and the first H-rich layer ( X_{H}>10^{-3} ) is r=0.032\penalty\ R_{\odot} . With a pulse duration of \tau\sim 400 yr, the diffusion coefficient needed to connect the H-rich layers to the convective zone is D\sim r^{2}/\tau\sim 4\times 10^{8} cm 2 s -1 - several orders of magnitude higher than the typical D_{\rm shear} in magnetic rotating models (Fig. 4 , middle and right panels). Non-magnetic models are also far from these values, especially in the zone of interest, i.e. below the H-rich layers (left panel). This demonstrates that rotation-induced mixing during the AGB phase is insufficient to trigger PIEs by itself. 5 Impact of rotation on i-process nucleosynthesis and Fluorine synthesis 5.1 The dilution procedure To estimate the surface abundances resulting from i-process nucleosynthesis in our 1 M_{\odot} , [Fe/H] =-2.5 AGB models, we adopted the dilution procedure described in 52 . During a PIE, heavy-element nucleosynthesis occurs prior to the splitting of the convective pulse ( 15 ; 13 ) . Since the post-split evolution (including mixing with the convective envelope) does not substantially alter these abundances, a computationally efficient approach was employed: the mean abundances of each element in the upper part of the convective pulse, just after the split, were diluted into the convective envelope using a fixed dilution factor calibrated on a full non-rotating 1 M_{\odot} , [Fe/H] =-2.5 AGB model. Because the effect of rotation on the structure is small (Sect. 4 ), this calibration can be safely used in our rotating models – except for the M1.0z2.5_v30 model, however, which behaves differently during the PIE (Sect. 5.2.1 ). This method yields accurate approximations of the final surface abundances without the need to evolve the model through the complete envelope mixing phase. For more details on the implementation and accuracy of this method, we refer to Sect. 3.1 of 52 . 5.2 The [Fe/H] =-2.5 models During the PIE, our [Fe/H] =-2.5 models reach peak neutron densities in the range 8.1\times 10^{13}