A Large-Scale Nanocrystal Database with Aligned Synthesis–Structure–Property Data Abstract The synthesis of nanocrystals has been highly dependent on trial-and-error, due to the complex correlation between synthesis parameters and physicochemical properties. Although deep learning offers a potential methodology to achieve generative inverse design, it is still hindered by the scarcity of high-quality datasets that align nanocrystal synthesis routes with their properties. Here, we present the construction of a large-scale, aligned Nanocrystal Synthesis-Property (NSP) database and demonstrate its capability for generative inverse design. To extract structured synthesis routes and their corresponding product properties from literature, we develop NanoExtractor, a large language model (LLM) enhanced by well-designed augmentation strategies. NanoExtractor is validated against human experts, achieving a weighted average score of 88% on the test set, significantly outperforming chemistry-specialized (3%) and general-purpose LLMs (38%). The resulting NSP database contains nearly 160,000 aligned entries and serves as training data for our NanoDesigner, an LLM for inverse synthesis design. The generative capability of NanoDesigner is validated through the successful design of viable synthesis routes for both well-established PbSe nanocrystals and rarely reported MgF 2 nanocrystals. Notably, the model recommends a counter-intuitive, non-stoichiometric precursor ratio (1:1) for MgF 2 nanocrystals, which is experimentally confirmed as critical for suppressing byproducts. Our work bridges the gap between unstructured literature and data-driven synthesis, and also establishes a powerful human-AI collaborative paradigm for accelerating nanocrystal discovery. Kai Gu 1 , Yingping Liang 2 , Senliang Peng 1 , Aotian Guo 1 , Haizheng Zhong 1,* , Ying Fu 2,* 1 MIIT Key Laboratory for Low-Dimensional Quantum Structure and Devices, School of Materials Sciences & Engineering, Beijing Institute of Technology, Beijing 100081, China 2 School of Computer Science and Technology, Beijing Institute of Technology, Beijing 100081, China e-mail: hzzhong@bit.edu.cn; fuying@bit.edu.cn Main Colloidal nanocrystals are an important class of nanomaterials with applications ranging from biomedicine to optoelectronics 1-3 , some of which have already been applied in commercial products 4,5 . The industrialization of nanocrystals requires materials that simultaneously satisfy multiple metrics, such as high quantum yield, precise emission peak, and long-term stability 4,6-9 . These properties are closely related to atomic arrangements, which are fundamentally determined by the nucleation and growth processes 10-12 . However, due to the high sensitivity of nanocrystals to synthesis parameters and the lack of quantitative theoretical descriptions 13,14 , synthesis optimization remains heavily reliant on labor-intensive trial-and-error exploration of a high-dimensional parameter space 15-17 . Data-driven inverse synthesis design offers a promising solution to this issue 18 . In contrast to inverse design for crystal structures from properties 19-21 , inverse synthesis design aims to generate precise synthesis routes including quantitative reactants and conditions, customized to specific target properties. However, given the complexity of the chemical synthesis space, achieving effective inverse design requires massive datasets where synthesis routes are rigorously aligned with product properties. Existing datasets related to chemical synthesis are typically collected through automated laboratories 22,23 or text mining via conventional natural language processing 24,25 . These datasets have been applied to predict nanocrystal sizes and optical properties directly from synthesis recipes 26-33 and to recommend precursors 34,35 . However, their utility for generative inverse design is constrained by the scarcity of large-scale data that aligns synthesis routes with product properties. LLMs have revolutionized data collection with their impressive contextual understanding and logical reasoning capabilities, presenting a unique opportunity for constructing structured databases from literature 36-38 . In this work, we develop NanoExtractor, an LLM dedicated to structured information extraction. Enabled by well-designed augmentation strategies, NanoExtractor achieves a weighted average score of 88% on the test set, exceeding the performance of other chemistry-specialized (3%) and general-purpose LLMs (38%). This model is employed to extract synthesis routes and corresponding product properties from the literature, constructing an aligned NSP database. The resulting NSP database contains approximately 160,000 aligned entries, covering synthesis methods for a wide range of nanocrystals and nanocomposites. We develop NanoDesigner for the generative inverse design of nanocrystals, based on the NSP database. Given the target product, specified reactants, and desired properties, NanoDesigner generates specific candidate synthesis routes. Experimental results confirm that the model successfully generates viable synthesis routes for both well-established PbSe nanocrystals and rarely reported MgF 2 nanocrystals. Figure 1: Data augmentation strategies and prompt design of NanoExtractor. (a) Schematic diagram of four data augmentation strategies for raw labels. (b) Two prompt templates designed for training with raw labels and four types of augmented data. Results Data Annotation The construction workflow of the NSP database is illustrated in Figure 1. Text and tabular information are extracted from approximately 170,000 articles related to nanocrystal synthesis. A pre-trained paragraph classifier is then employed to identify target paragraphs containing descriptions of nanocrystal synthesis and properties. These target paragraphs are subsequently fed into the NanoExtractor to achieve the alignment of synthesis routes with product properties, resulting in the structured NSP database. The paragraph classifier is designed to distinguish target paragraphs (those describing synthesis methods, size, morphology, absorption spectra, and emission spectra) from non-relevant text (an annotation example is shown in Figure S1) and achieves a high recall of 0.96. An analysis of token importance within the target paragraphs reveals that numerical values and operational verbs associated with synthesis are critical distinguishing features (Figure S2). These target paragraphs are annotated with synthesis steps, synthetic routes, and product properties to construct the NanoExtrator dataset, as shown in Figure S3a. Specifically, synthesis steps are defined as concise sentences containing a single operational verb; synthesis routes are sequences composed of different synthesis steps; and product properties including size, morphology, and emission peak positions (an annotation example is shown in Figure S3b). It is critical that synthesis routes and product properties are linked through specific product names. Data Augmentation for NanoExtractor To improve the robustness of NanoExtractor, we propose four data augmentation strategies targeting common failure modes in LLM-based synthesis route extraction. First, as shown in Figure 2a, general-purpose LLMs (e.g., Deepseek and GPT) are utilized to rewrite target paragraphs and corresponding synthesis steps via prompt engineering, followed by manual verification to generate rephrased labels. Second, to learn the error-correction capability of the model, incorrect extraction answers are constructed by controlled exchanging, deleting, or fabricating steps, numbers, routes, and properties (see Figure S3c for details), which serve as negative samples during training. Third, to mitigate model hallucinations, we generate negative answers by replacing target paragraphs with other paragraphs and populating the extraction fields with ”NOT MENTION”, thereby suppressing extraction from non-target text. Fourth, a confidence calibration strategy is implemented by appending low-confidence tags to labels containing incorrect answers, while attaching high-confidence tags to the remaining labels. This enables NanoExtractor to simultaneously output confidence scores for its responses. To effectively integrate both the raw data and the above augmented samples into a unified training framework, we design two prompt templates to simultaneously utilize both raw and augmented data (Figure 2b). Prompt #1 instructs the model to strictly extract synthesis routes and properties verbatim from target paragraphs, prohibiting any inference or fabrication. Prompt #2 permits the model to reference incorrect answers to learn error correction. The target paragraph followed by the prompt serves as the input, with the correct answer (high-confidence tags) and incorrect answer (low-confidence tags) as the output. Notably, in Prompt #2, the incorrect answer is also included in the input (following the target paragraph), training the model to correct mistakes. Figure 2: Data augmentation strategies and prompt design of NanoExtractor. (a) Schematic diagram of four data augmentation strategies for raw labels. (b) Two prompt templates designed for training with raw labels and four types of augmented data. Evaluation of NanoExtractor We develop a test set consisting of diverse samples, covering challenges such as implicit operating conditions, continuous product processing and characterization workflows, branching variables in multi-parameter reactions, and long-context dependencies. Figures 3a and 3b show the output of NanoExtractor and the corresponding reference output for a representative sample from the test set (Test set_1), respectively. The model can well reproduce the ground truth. For instance, it correctly identifies the reaction type in synthesis step (S1), where the product name is a valid synonymous substitution. We invite human experts to evaluate the model's performance according to the established scoring criterion (see Supplementary Note 1 for details). The scoring criterion is reference-based, with the total score computed by comparing model predictions against the ground-truth answers. Specifically, a correct route synthesis is awarded 10 points, with an additional 2 points earned for each correctly identified property. A synthesis route is considered correct only if all numerical values and operational verbs within each step are accurate, with no omissions or redundancies. Based on this evaluation metric, NanoExtractor achieves a score of 100% for the sample in Figure 3a, while another test sample yields a score of 84.2% (Figure S5). Figure 3c shows the weighted average scores on the test set across different training epochs. The model achieves a peak weighted average score of 88% after two epochs, and extended training leads to overfitting. Notably, training without data augmentation yields a weighted average score of only 15%. Table S1 details the specific reasons for score deductions of NanoExtractor. The model trained with two epochs loses points only due to missing product properties and routes, while the model trained for one epoch loses points due to misalignment between the product properties and the synthesis route. This type of missing error is acceptable in database construction, whereas misalignment errors represent mismatches between synthesis routes and product properties, resulting in reduced database credibility. A t-test is used to evaluate the association between the model's output confidence and its performance scores. As shown in Figure S6, there is a statistically significant difference (p < 0.05) between the scores of the high-confidence and low-confidence groups. To further benchmark NanoExtractor against the state-of-the-art LLMs, we evaluate five representative models on the same test set, including both chemistry-specialized LLMs (ChemDFM 39 , ChemLLM 40 , SciLitLLM 41 ) and advanced general-purpose LLMs (GPT-5.2, Grok-4). As shown in Figure 3d, NanoExtractor significantly outperforms all compared models. The chemistry-specialized models struggle to handle the complex extraction tasks. ChemDFM achieves a weighted average score of only 3%, while ChemLLM and SciLitLLM fail to yield valid scores (0%). General-purpose models perform better but remain insufficient for precise database construction, with GPT-5.2 and Grok-4 scoring 38% and 33%, respectively. An example of an output from chemistry-specialized LLMs and general-purpose LLMs on the test set is provided in Supplementary Note 2. Figure 3: Performance evaluation of NanoExtractor. (a) NanoExtractor output for the test set sample (Test set_1) and (b) the reference output. (c) Weighted average test set scores evaluated by human experts across varying training epochs. (d) Comparison of weighted average scores on the test set for NanoExtractor against chemistry-specialized (ChemDFM, ChemLLM, SciLitLLM) and general-purpose (GPT-5.2, Grok-4) LLMs. Statistical overview of the NSP database Using NanoExtractor, approximately 130,000 literature sources are extracted, and samples containing ”NOT MENTION” or those with low confidence are filtered out. As shown in Figure S7, the NSP database contains approximately 160,000 structured synthesis routes (corresponding to about 47,000 articles). We further evaluate a subset of samples from the database that are excluded from both the training and test sets, which receive high scores of 100% (see Supplementary Note 3). As shown in Figure 4a, the NSP database covers a wide variety of synthetic methods for nanocrystals, including hydrothermal synthesis, hot-injection synthesis, and heat-up synthesis, among others. Furthermore, the database records various product properties, with a primary focus on size and optical properties (Figure 4b). Figure 4c shows partial statistics on the product names and the number of corresponding synthesis routes (excluding composite and core-shell structures). Taking CsPbBr 3 nanocrystals as an example, we analyze the probability of specific reactant combinations. As indicated in Figure 4d, the combination of PbBr 2 , oleylamine, and Cs 2 CO 3 occurs with a frequency of 95%, while toluene, hexane, ethyl acetate, and N,N-dimethylformamide serve as the most common solvents and antisolvents. Figure 4: Statistical overview of the NSP database. Statistics on (a) reaction types, (b) product properties, and (c) product names recorded in the NSP database. (d) Probability of reactant combinations for CsPbBr3 nanocrystals in the NSP database. Inverse design with NanoDesigner To demonstrate the potential of the NSP database for inverse synthesis design of nanocrystals, we develop NanoDesigner. As shown in Figure 5a, by inputting the target product, specified reactants, and desired properties (see Supplementary Note 4 for prompts), NanoDesigner is capable of generating multiple candidate synthesis routes. Taking the rarely reported synthesis of MgF 2 nanocrystals as an example, we constrain the reactants to MgCl 2 and NaF with a target size of 10 nm. NanoDesigner proposes two distinct synthesis routes (Figure 5b and Supplementary Note 5). Notably, literature typically reports the use of hydrofluoric acid for synthesizing MgF 2 nanocrystal 42 . We intend to explore potential routes for synthesizing MgF 2 nanocrystal using NaF (a safer reactant). This requires increased generalizability of NanoDesigner because this synthesis route does not existed in the training set. Surprisingly, the synthesis route proposed by NanoDesigner provides precise synthesis details, including reactant molarities, solvent volumes, reaction temperatures, and post-processing protocols (Figure 5b). However, noting that the maximum solubility of NaF in water (0.1 M) is lower than the concentration recommended by the model (1 M), we adjust the precursors to c(MgCl 2 ) = c(NaF) = 0.1 M for the experiment while maintaining other conditions. Figure 5c shows the experimental results, including photographs of three forms of MgF 2 nanocrystals: colloidal, ethanol dispersion, and dried colloidal. The transmission electron microscope (TEM) image of the resulting colloidal MgF 2 nanocrystals is shown in Figure 5d, with an average diameter of 16.3 nm. Surprisingly, both routes recommended by NanoDesigner suggest a non-stoichiometric molar ratio of MgCl 2 to NaF (1:1), deviating from conventional chemical intuition. We investigate the product composition at a stoichiometric 1:2 molar ratio. X-ray diffraction (XRD) analysis indicates that this yields a mixture of MgF 2 and NaMgF 3 (Figure S8). Furthermore, we validate the inverse design capabilities using well-established PbSe nanocrystals, specifying PbO and tri-n-octylphosphine as reactants, with a target size of 10 nm and spherical morphology. The first of the three model-generated routes suggested by NanoDesigner (Supplementary Note 6) is selected for experimental validation. The XRD pattern and TEM image (Figure 5e and 5f) confirm the successful synthesis of PbSe nanocrystals. Size distribution statistics confirm an average diameter of 10.5 nm, consistent with the target property of 10 nm. To evaluate the model's capability for inverse synthesis design, the same inverse design example of MgF 2 is assigned to chemistry-specialized LLMs and general-purpose LLMs. As shown in Supplementary Note 7, ChemDFM and ChemLLM produce disorganized responses. SciLitLLM provides an over-simplified synthetic route and recommends the standard stoichiometric 1:2 ratio (Mg:F), which inevitably results in impure phases. Similarly, both GPT-5.2 and Grok-4 recommend the standard stoichiometric 1:2 ratio consistent with chemical intuition, but Grok-4's proposed room-temperature reaction is insufficient for crystallization. Figure 5: Generative inverse design and experimental validation. (a) Schematic diagram of inverse design for nanocrystals using NanoDesigner with the NSP database as training data. (b) The suggested synthesis route for MgF2 nanocrystals by NanoDesigner. (c) Photographs of MgF2 nanocrystals as colloids, ethanol dispersions, and dried colloids. (d) TEM image of MgF2 nanocrystals. (e) XRD patterns of PbSe and MgF2 nanocrystals. (f) TEM images of PbSe nanocrystals, the inset shows size distribution statistics. Discussion In summary, we construct an aligned Nanocrystal Synthesis-Property (NSP) database for nanocrystals using NanoExtractor. By implementing four data augmentation strategies, the model significantly improves extraction accuracy, mitigates hallucinations, and enables self-assessment capabilities. Notably, compared to our model without data augmentation, the weighted average score improves from 15% to 88%. This performance significantly outperforms the state-of-the-art LLMs. The benchmark results reveal that chemistry-specialized and general-purpose LLMs achieve weighted average scores of only 3% and 38%, respectively, on the same test set, underscoring the necessity of our domain-specific fine-tuning for complex, structured information extraction. Using approximately 160,000 synthesis routes from the NSP database, we develop NanoDesigner to demonstrate its capability for the inverse design of nanocrystals. Given specified constraints (such as the target product and reactants), the model generates detailed synthesis routes that are subsequently validated experimentally. Most remarkably, for the synthesis of MgF 2 , the model recommends a counter-intuitive non-stoichiometric precursor ratio, which is experimentally confirmed to be critical for suppressing the formation of the NaMgF 3 byproduct. In contrast, the state-of-the-art LLMs rely on conventional chemical intuition and fail to identify this critical synthesis condition, further validating the advantage of learning from a large-scale aligned database. We believe the NSP database serves as a foundation for developing forward prediction and inverse design models. It is worth developing more refined design algorithms and integrating named entity recognition technologies to realize the efficient and precise discovery and optimization of nanocrystals in the future. Methods Chemicals All commercially available chemicals were used without further purification. Anhydrous magnesium chloride (MgCl 2 , 99%, 3AMaterials), sodium fluoride (NaF, 99%, 3AMaterials), deionized water (laboratory-made), Lead(II) oxide (PbO, 99.9%, Aladdin), selenium powder (Se, 99.99%, Aladdin), oleic acid (OA, 90%, Aladdin), trioctylphosphine (TOP, 90%, Aladdin), 1-octadecene (ODE, 90%, Aladdin), hexane ( \geq 99%, Sigma-Aldrich) and ethanol (anhydrous, \geq 99.5%, Sigma-Aldrich) were used in nanocrystals synthesis, purification, and washing. Synthesis and Characterization of MgF 2 and PbSe Nanocrystals The synthesis of MgF 2 nanocrystals followed the route suggested by the model (Figure 5b), except that the reaction was conducted in a 100 mL Teflon-lined stainless steel autoclave with 60 mL of deionized water (c(MgCl 2 ) = c(NaF) = 0.1 M), while all other conditions remained unchanged. The synthesis of PbSe nanocrystals followed the route suggested by the model (see the first route in Supplementary Note 6), except that the reaction was conducted in a 100 mL three-neck flask, and all reactant quantities were scaled up 20-fold to ensure sufficient product yield. All nanocrystals were not subjected to any size selection prior to TEM characterization. The nanocrystal samples were dispersed in hexane (for PbSe) or ethanol (for MgF 2 ) and added dropwise to an ultrathin carbon-supported film (300 mesh) at 60 °C. TEM observations were performed using a FEI Tools F200S field-emission transmission electron microscope (FEI Co., USA) operated at 200 kV. XRD patterns were recorded by a Bruker D8 FOCUS advance X-ray diffractometer operated at 40 kV and 200 mA current under Cu K \alpha radiation (wavelength of 1.5418 Å). Literature Collection and Preprocessing Relevant article DOIs were identified by querying the CrossRef database using keywords such as ”nanomaterials”, ”nanocrystals”, ”nanoparticles”, and ”quantum dots”. The full-text articles were primarily acquired via the application programming interfaces (APIs) of major publishers, specifically Elsevier and Springer Nature. To ensure strict compliance with copyright regulations and data usage policies, we utilized authorized text and data mining protocols. Content was downloaded in structured XML or HTML formats to facilitate accurate parsing. All data acquisition was conducted in accordance with ethical guidelines, with explicit permissions or API keys obtained from the respective publishers to sanction the usage of their content for research purposes. Following a rigorous data cleaning process, which involved the exclusion of review articles, non-research content, and incomplete texts, a final corpus of approximately 170,000 articles was retained to serve as the input for the paragraph classifier. Paragraph Classifier Development To efficiently filter relevant text from the massive corpus, we developed a binary classification model based on the RoBERTa-base architecture 43 . The annotated dataset was split into training, validation, and test sets using stratified sampling to maintain the consistency of label distribution. To address the inherent class imbalance between target and other paragraphs, we calculated a positive class weight based on the training set statistics and integrated it into the binary cross entropy with logits loss function. Rather than using a default classification threshold of 0.5, we implemented a dynamic threshold optimization strategy. After each epoch, the decision threshold was tuned on the validation set to maximize the F1 score, ensuring the optimal trade-off between precision and recall. The best-performing model configuration and its corresponding threshold were then applied to the test set for final evaluation. Data Augmentation Strategies We implemented four distinct data augmentation strategies applied to the raw labels to enhance model robustness. First, the general-purpose LLM was utilized to rephrase the target paragraphs and extracted content within the raw labels via prompt engineering. Each raw label was rephrased 2~3 times, followed by rigorous manual verification to ensure the quality and semantic consistency of the augmented data. Second, to train the model's error-correction capabilities, we constructed negative samples containing specific types of errors. We defined 15 permutation types derived from 3 operations (exchange, delete, and fabricate) applied to 5 target entities (synthesis steps, numerical values within steps, route sequences, property names, and numerical values of properties), as illustrated in Figure 2a. The definitions of these target entities are detailed in Figure S3b. Figure S3c shows three examples of these permutations. For instance, the ”exchange-step” operation involves exchanging the content of synthesis steps while maintaining their original sequence numbering. These negative samples were generated programmatically to ensure randomness. Third, to suppress model hallucinations and prevent forced extraction from irrelevant text, we constructed ”negative answer” labels. In these samples, the target paragraph in a raw label was replaced with a non-relevant paragraph, and all extraction fields were populated with ”NOT MENTION”. Fourth, a confidence tag was appended to all raw and augmented labels. Specifically, labels containing incorrect answers (from the negative sampling strategy) were tagged with a ”Confidence: low” marker at the end of the sequence, whereas all other labels were appended with a ”Confidence: high” marker. This strategy enables the model to output a confidence assessment simultaneously with its extraction. Figure S4a shows the quantitative distribution of the raw and augmented data. Figure S4b shows the token count distribution of the training samples (including prompt tokens). Model Training For the task of extracting structured synthesis-property relationships from literature, we developed NanoExtractor by fine-tuning the Qwen3-14B model using the LLaMA-Factory framework. To balance computational efficiency with model performance, we utilized Low-Rank Adaptation (LoRA) technology. The LoRA rank was set to 12, and the scaling factor was set to 24, targeting all linear layers within the transformer blocks. A dropout rate of 0.05 was applied to the LoRA layers to prevent overfitting. The training process was optimized using the AdamW optimizer with a cosine learning rate scheduler. The initial learning rate was set to 4×10 -5 with a warmup ratio of 0.1. To accommodate the long-context requirements of scientific literature, the maximum sequence length (cutoff length) was set to 8,192 tokens. The model was trained in BFloat16 precision. For the training setup, we used a per-device batch size of 8 with gradient accumulation steps set to 2. The model was trained for up to 5 epochs. 10% of the dataset was reserved as a validation set. During the inference phase for information extraction, the temperature and top-p parameters were set to 0.2 and 0.8, respectively. To enable the generative inverse design of nanocrystals, we developed NanoDesigner by full fine-tuning on the lightweight Qwen3-0.6B model. The training configuration included a learning rate of 3×10 -5 , a per-device batch size of 8, and a gradient accumulation step of 8 to stabilize the training updates. The maximum sequence length was set to 2,048 tokens, which was sufficient to cover the context of synthesis route generation. Similar to the extraction model, we used a cosine learning rate scheduler with a 0.1 warmup ratio and trained for 5 epochs. For the inverse design inference, to encourage diversity and creativity in the generated synthesis routes, the sampling parameters were adjusted to a higher temperature of 0.95 and a top-p value of 0.7. All experiments were conducted on a server equipped with an NVIDIA RTX PRO 6000 GPU. Evaluation Metrics We evaluated structured extraction performance using a reference-based scoring metric designed to reflect the correctness of complete synthesis routes and their associated product properties. Rather than evaluating individual tokens, our metric operates at the level of synthesis steps, routes, and properties, which aligns with the practical requirements of database construction. The scoring metric was established based on a weighted system analogous to recall, where the total score for a sample is calculated against the reference ground truth. Detailed scoring criteria are provided in Supplementary Note 1. The evaluation follows a hierarchical procedure, first assessing the synthesis route, followed by the product properties. A synthesis route is considered correct (+10 points) only if the synthesis steps and the sequence of route perfectly match the reference. Within each step, all numerical values must be exact matches, while operational verbs and reaction types are evaluated based on semantic equivalence (accepting synonyms). Any addition, omission, or fabrication of steps results in a score of zero for the route. Under the premise of a correct synthesis route, the corresponding product properties are then evaluated. A property is deemed correct (+2 points per property) only if the property name, numerical value, and unit exactly match the reference. We defined a specific edge case for ”partial correctness” (+5 points). This applies when the reference answer outlines an independent synthesis route for a precursor, whereas the model's output correctly merges the precursor synthesis and the final product synthesis into a single continuous route without any omission, addition, or fabrication of information. In such cases, the route is awarded 5 points, and the subsequent property evaluation proceeds as normal. Benchmarking As part of our benchmarking, we compared NanoExtractor against five baseline large language models, including chemistry-specialized models (ChemDFM, ChemLLM and SciLitLLM) and general-purpose models (GPT-5.2 and Grok-4). All models were evaluated on the same held-out test set, which was excluded from training and data augmentation. Prompts were adapted to ensure a consistent extraction format while strictly prohibiting inference or fabrication beyond the provided text. For GPT-5.2 and Grok-4, web browsing and external tool access were explicitly disabled during evaluation. The final score for each model was computed as a weighted average across all test samples. Data availability All data are provided in the main text or Supplementary Information. All model training code and weights, as well as the NSP database, are available at https://github.com/ime1452/Synthesis-Properties-Database-for-Nanomaterials . Supplementary information Supplementary Figs. 1-8, Notes 1-7 and Tables 1.