The TeV emission of 3C273: inverse Compton radiation from shear-accelerated high-energy electrons in the large-scale jet? Fabrizio Tavecchio Abstract The VERITAS Collaboration recently reported the detection of very-high-energy (VHE) gamma-ray emission from the prototypical radio quasar 3C273. The temporal and the spectral properties of this component do not appear compatible with the extrapolation of the beamed blazar-like emission of the inner, pc-scale jet. We explore the possibility that the VHE component is produced in the jet at kpc scale through the inverse Compton emission of a population of ultra-high energy electrons (with Lorentz factor γ ∼ 10 8 \gamma\sim 10^{8} ). In the model these electrons are accelerated through the shear acceleration mechanism, and they also account for the still puzzling X-ray emission of knots detected by Chandra in the large-scale jets of several powerful quasars (including 3C273). In our scenario the VHE component can be interpreted as the integrated emission from the two brightest knots of the 3C273 jet. We speculate that the decay of the emission on the timescale of ∼ 3 \sim 3 years could be accounted for by the scenario if the VHE radiation is produced in some compact regions in the downstream flow of a recollimation shock. † † orcid: 0000-0003-0256-0995 Affiliation: INAF – Osservatorio Astronomico di Brera, Via E. Bianchi 46, I-23807 Merate, Italy 1 Introduction Despite two decades of observational and theoretical efforts, the nature of the optical and X-ray emission from compact features (knots) in large-scale jets of powerful radio-loud quasars is still debated (for a review see Harris & Krawczynski 2006 ). The widely discussed model which assumes that the X-ray emission is produced by relativistic electrons through the inverse Compton (IC) scattering of the Cosmic Microwave Background (IC/CMB model; Tavecchio et al. 2000 ; Celotti et al. 2001 ) is strongly challenged by the good upper limits put in the GeV band by Fermi /LAT (e.g., Meyer & Georganopoulos 2014 ; Meyer et al. 2015 ) and by the morphological ( Tavecchio et al. 2003 ) and spectral ( Jester et al. 2006 ) properties of the emission. A potential viable alternative invokes the presence of two distinct electron populations, one at the low energies, responsible for the emission from radio to the optical band, together with an ultra high-energy population (with Lorentz factors \gamma\sim 10^{7-8} ) emitting X-ray through synchrotron radiation in magnetic fields of B\sim 10\;\mu G (e.g., Harris & Krawczynski 2002 ; Kataoka & Stawarz 2005 ). This scenario would also explain the high degree of polarization ( >30\% ) measured in the optical band for a component in the jet of the quasar PKS 1136-135, whose optical emission belongs to the high-energy emission component ( Cara et al. 2013 ) . A specific model based on the double-population scenario has been presented in Tavecchio 2021 . The model assumes that low energy electrons are accelerated at shocks through the standard diffusive shock acceleration mechanism, while electrons further energized through shear acceleration ( Rieger 2019 ; Rieger & Duffy 2022 ; Wang et al. 2023 ) form a narrow distribution producing synchrotron X-ray emission. The model is able to explain the observed spectral energy distribution (SED) of the knots, with an acceptable energy budget for the jets. In the model of Tavecchio 2021 the jet is only mildly relativistic, with bulk Lorentz factors \Gamma\sim 2 , thus avoiding the overproduction of GeV gamma rays through the IC/CMB mechanism as constrained by Fermi /LAT. However, both the low and high energy electron populations produce high and very-high gamma-ray radiation through the IC scattering of synchrotron photons and CMB. The resulting non-negligible high-energy emission extends into the TeV band. The VERITAS collaboration has recently reported the detection of VHE emission from the prototypical radio-quasar 3C 273 1 1 1 A presentation can be found at https://indico.cern.ch/event/1258933/contributions/6491204/attachments/3104111/5500883/Benbow_ICRC2025.pdf . The light curve shows evidence for a possible variation (i.e. decay) of the flux with a timescale of \sim 3 years. The ( time-integrated) hard spectrum, raising in the \nu F(\nu) representation, is incompatible with the extrapolation of the soft tail of the blazar \gamma -ray component recorded in the GeV band by Fermi /LAT, associated to the IC emission from the inner, pc-scale jet (e.g. Ghisellini et al. 2010 ). A feasible explanation could be to assume an additional emission component associated to the blazar region (possibly of hadronic origin). In this paper we explore instead the possibility that the VHE component flags the expected integrated IC emission produced by the high-energy, shear-accelerated electrons in the large-scale (kpc) jet. The paper is organized as follows. In Sect. 2 we present a sketch of the model, in Sect. 3 we discuss the results and in we conclude in Sect. 4 . Throughout the paper, the following cosmological parameters are assumed: H_{0}=70{\rm\;km\;s}^{-1}{\rm\;Mpc}^{-1} , \Omega_{\rm M}=0.3 , \Omega_{\Lambda}=0.7 . 2 The model We sketch below the main ingredients of the model. For a detailed description the reader is referred to Tavecchio 2021 . As mentioned above, we assume that the low energy (radio to optical) emission of knots in 3C273 is produced by relativistic electrons accelerated by a shock (LE electrons in the following). We assume that these electrons follow a cut-off power-law energy distribution with slope n_{\rm sh} : n_{0}(\gamma)=K\gamma^{-n_{\rm sh}}\exp\left(-\frac{\gamma}{\gamma_{\rm cut}}\right);\;\;\;\gamma>\gamma_{\rm min} (1) where K is a normalization and \gamma_{\rm cut} is the maximum Lorentz factor reached by the particles. The jet is characterized by a velocity structure, with a core of constant speed surrounded by a shear layer in which the plasma speed \beta_{j}(r) decreases along the radial direction r . The shear could be the result of the interaction of the jet with the external material and the triggering of Kelvin-Helmoltz instability (e.g. Borse et al. 2021 ; Wang et al. 2023 ). We use the following simple linear parametrization for the velocity profile: \beta_{j}(r)=\left\{\begin{array}[]{ll}\beta_{j,0}&\mbox{$r\leq r_{j}-\Delta L$}\\ \beta_{j,0}-\frac{\beta_{j,0}}{\Delta L}\left(r-r_{j}+\Delta L\right)&\mbox{$r>r_{j}-\Delta L$},\end{array}\right. (2) where r_{j} is the jet radius and \Delta L characterizes the thickness of the layer. The precise shape of the profile can affect the resulting electron energy distribution, e.g. Rieger & Duffy 2022 . However, considering the limited quality of the data, the particular choice is not expected to have a major impact on the model. A small fraction of the LE electrons accelerated at the shock enter the sheath in the downstream region, where they experience further energization through scattering with magnetic turbulence (HE electron component in the following). For the modeling of the shear acceleration process we follow Liu et al. 2017 , which uses an approximate Fokker-Planck treatment to model the time-dependent evolution of the electron energy distribution. A key parameter regulating the shear acceleration process is the mean free path of particles scattered by magnetic turbulence, \lambda , that can be written: \lambda(\gamma)=\frac{r_{g}}{\xi}\left(\frac{r_{g}}{\Lambda}\right)^{1-q}, (3) where \gamma is the particle Lorentz factor, r_{g} is the particle gyration radius, \xi=\delta B^{2}/B^{2} is the ratio between the energy density of the turbulent and the regular magnetic field, \Lambda is the maximum wavelength of turbulence interacting with the particles and q is the slope of the power law spectrum of the turbulent field in the wavenumber space. In the following we fix q=5/3 , corresponding to the Kolmogorov spectrum. A second important parameter regulating the acceleration efficiency is related to the velocity profile and it is defined as A=\Gamma_{j}(r)^{2}|\partial_{r}\beta_{j}(r)|c , where \Gamma_{j}(r)=[1-\beta_{j}(r)^{2}]^{-1/2} is the flow bulk Lorentz factor. The acceleration timescale can be written as: t_{\rm acc}(\gamma)=\frac{15}{6-q}\frac{c}{\lambda A^{2}}. (4) Note that t_{\rm acc}\propto(\gamma/B)^{-1/3} for q=5/3 , therefore t_{\rm acc} decreases with the particle energy, i.e. particle at large energies are more efficiently accelerated than low energy ones. This is the reason why a population of pre-accelerated electrons is required for this mechanism to work efficiently. On the other hand, large magnetic fields, determining small gyroradii and thus small \lambda , imply large acceleration times. Particles can also diffusively escape from the acceleration layer. We approximated the escape time considering the diffusion of particles from a region with size comparable to the shear layer thickness \Delta L , i.e., t_{\rm esc}(\gamma)\simeq\Delta L^{2}/2\kappa , where for the spatial diffusion coefficient one can use the standard expression \kappa=c\lambda/3 . To ensure acceleration, we have to assume t_{\rm acc}