A Sequential Planning Framework for the Operational Reality of Interacting Air Traffic Flow Regulations and Traffic Flow Programs Thinh Hoang, Daniel Delahaye Abstract Air Traffic Flow Management (ATFM) traffic regulations are being increasingly used as rising demand meets persistent workforce shortages. This operational strain has amplified a critical phenomenon that we call regulation cascading : the compounding, non-linear interactions that occur when multiple regulations influence one another in unpredictable ways. As the number and complexity of regulations grow, cascading effects become more pronounced, undermining the network operator’s ability to protect sectors reliably. To address this challenge, we introduce RegulationZero, a sequential planning framework that natively operates in the regulation space, optimizing over ordered sequences of flow-level regulations that remain fully compatible with existing slot-allocation systems such as CASA and RBS++. At its core, the method employs a hierarchical Monte Carlo Tree Search (MCTS) that first samples congestion hotspots and then selects candidate regulations synthesized by a local proposal engine. Each proposal is evaluated by a fast First-Planned-First-Served (FPFS) allocator to estimate its reward, with these feedbacks guiding the subsequent MCTS exploration. Experiments on pan-European summer-peak traffic confirm that RegulationZero delivers promising and consistent performance. Compared to a simulated-annealing baseline operating in trajectory space, it achieves markedly higher objective improvements, while delaying fewer flights at shorter horizons and maintaining near-parity efficiency in benefit per delayed flight over longer periods. The framework generalizes well across traffic days with diverse congestion patterns and consistently outperforms a greedy rate-capping policy, which shows clear manifestation of regulation cascading effects. Importantly, RegulationZero preserves FPFS fairness and supports expert knowledge injection, offering a pragmatic and low-disruption pathway toward automation in operations. 1  Introduction 1.1  The lagging of current Traffic Flow Management measures behind operational realities. The recent surge in air traffic demand has placed immense strain on the current Air Traffic Flow Management (ATFM) system. In Europe, flight volumes increased by 9.8% to reach 10.2 million flights in 2023, representing approximately 93% of 2019 levels, with some regions even surpassing pre-pandemic volumes in 2024 [ 1 , 2 ] . Across the Atlantic, the U.S. FAA reported that the National Airspace System handled a record 16.3 million flights in 2023 [ 3 ] . Beyond rising demand, workforce constraints have recently emerged as a critical bottleneck, particularly in Europe and the United States. Approximately 3 million minutes of en-route ATFM delay in 2023 were attributed solely to controller strikes [ 6 ] . In the U.S., FAA data indicate that most air traffic facilities remain understaffed, with the National Airspace System operating at only 72% of the required number of fully certified controllers [ 7 ] . With demand continuing to rise and available capacity lagging behind, the pressure on ATFM positions intensified. The above statistics showed that existing capacity management strategies are struggling to match demand, therefore calling for a better ATM solution today, not in the future. 1.2  The Challenges of Regulation Planning & Regulation Cascading 1.2.1 The Operation of Delay Programs The current DCB tasks are chiefly realized world-wide by the slot allocation algorithms, such as Computer Assisted Slot Allocation (CASA) algorithm by Eurocontrol in Europe, or Ration-by-Schedule and Compression (RBS++) in the U.S. In the European context, FMPs continuously monitor demand and capacity using Traffic Volumes (TFVs) built around a reference location and associated flows, and provide the NM with monitoring values, TFV/flow definitions and regulation proposals. Once NM agrees, it activates a regulation that explicitly contains the validity window, a description of the location/reference, and the entering flow rate. When a regulation is activated, NM’s CASA builds a slot list at the declared rate and allocates CTOTs to the affected flights on a First-Planned-First-Served (FPFS) basis (Figure 1 ) [ 9 ] . Similarly, in the U.S., ATCSCC sets the program’s time window, rate and flight scope/filters, and TFMS applies RBS++ to allocate take-off slots/EDCTs [ 10 ] . FMP 1 Network Manager FMP 2 FMP 3 Regulations CASA Algorithm EUROCONTROL ACCs Airports Delays Flight 1 Flight 2 Figure 1 : The general Flow Regulation Workflow in the European Context. Designing effective flow management regulations is a complex, experience-driven task, especially under uncertain conditions like adverse weather. FMP staff must anticipate and mitigate demand-capacity imbalances hours in advance, often based on imperfect forecasts. In practice this relies heavily on veteran traffic managers’ expertise to interpret evolving situations and coordinate interventions. In 2023, Eurocontrol noted a sharp increase in short-notice adjustments by FMPs, with the frequency of rapid regulation updates doubling compared to 2022. These frequent, reactive changes rendered the daily ATFM plan highly dynamic, demanding constant human oversight and introducing greater unpredictability for airlines. 1.2.2 The Complex Interactions between Regulations Even with perfect traffic forecasts, the fragmented nature of regulation proposals by individual FMP positions at each ACC could result in a set of regulations that may conflict with each other, leading to degraded efficiency and increase Collaborative Decision Making (CDM) efforts. For instance, during periods of convective weather over Central Europe, adjacent FMPs such as those in Munich, Vienna, and Zurich may independently impose flow regulations to protect their sectors. When implemented without cross-border coordination, these local measures can create overlapping or contradictory restrictions along shared traffic flows: one regulation may cancel another’s flows, leading to unpredictable effects and increased workload for the Network Manager to reconcile competing constraints in real time. In this paper, we refer to this phenomenon as regulation cascading (RC), which is one of the prominent sources of unpredictability in the network-level regulation planning. Addressing this challenge requires reframing the ATFM DCB problem within a conceptual space distinct from conventional flight-centric paradigms like Trajectory-Based Operations (TBO). We refer to these alternative domains as the regulation space and the trajectory space, respectively. Figure 2 contrasts the workflow structures of representative slot allocation algorithms typically found in the literature (operating in the Trajectory Solution Space) with those classified as Regulation Planners (aligned with the Regulation Solution Space). Table 1 outlines the key distinctions between the two in details. As is evident from this comparison, searching within the regulation space aligns more with the structure of a Markov Decision Process (MDP) rather than a traditional static optimization problem, since each regulatory action taken induces a transition in the system’s state, such as dumping traffic on another area and thereby, changing the flow components. This sequential decision-making formulation introduces a substantially higher level of complexity: the agent must contend with temporal dependencies and delayed effects of regulations. In essence, the challenge lies not only in identifying an optimal regulation at a given instant, but in learning an adaptive policy that balances short-term overload relief, with long-term network stability. Slot Allocation Algorithm Flight List + Constraints + Objectives Slot List for Each Delayed Flight TRAJECTORY SOLUTION SPACE METHODS REGULATION SPACE METHODS Flight List + Constraints + Objectives Regulation Planner Regulations or Flow Programs FPFS Slot Allocator Slot List for Each Delayed Flight Required for Operations Figure 2 : Comparison between the optimization pathways of slot allocation algorithms and those of regulation planning processes. Table 1 : Comparisons between the TBO and the Regulation Solution Space. Aspect Trajectory Space Regulation Space N. variables Fixed: Could be realized with a fixed binary vector of delay values whose length is the total number of flights. Varying: The number of regulations to be created could vary from a dozen to hundreds. Historical dependence Markovian: The number of changes one can make to any flight’s decision variables depend very little on the history (although the change can be accepted or rejected later by the optimizer). Non-Markovian: Each regulation proposal must base on the selection of a reference location (typically a hotspot) and the traffic flows associated with the reference location. These two information depend on the previous regulations that had been imposed before. Evaluation Direct: Objective functions are relatively straightforward to be computed following a decision variable change. Multi-stage with a nested slot allocation algorithm inside: The regulations ought to be properly parsed, then the CASA algorithm will assign the delays, then the objective function can be calculated. Fine-tuning Limited: Usually a complete re-run, optionally with a convexification term in the objective function will be required if the flight plans change. Liberal: Many measures are available: tuning the rate, tweaking of flow filters or a complete re-run are all valid options that operators can choose. 1.3  Our Contributions To address these challenges, we propose a general framework dubbed RegulationZero based on Monte Carlo Tree Search (MCTS) [ 39 ] designed to search for an optimal sequence of flow-level regulations that resolves DCB problems, in contrast to other flight-based approaches that rely on deterministic delay assignment schemes. Because the traffic situation evolves naturally in the framework, it aims to support operators precisely on complex cross-border regulation interactions that are prone to cause unpredictability which requires a lot of CDM efforts. The framework is also fully compatible with existing ATFM workflows worldwide, enabling minimal operational disruption, while being performant enough and preserving fairness through the familiar FPFS principle. More importantly, because the search process operates within the same regulation space used by flow manager experts, it enables natural integration of expert intuition to effectively constrain and guide the search domain. Furthermore, the framework exhibits embarrassingly parallel scalability, thus the solution quality could be improved with more compute, without having to spend more time on iterations. While the end goal is still delaying flights, it is crucial to emphasize that in the current context, RegulationZero is not a slot allocation optimizer ; rather, it operates as a planning agent within the broader ATFCM framework . This positions RegulationZero as a dynamic learning system designed to refine regulatory decisions through iterative network responses rather than solely optimizing predefined allocation metrics. This is made evident by noting that RegulationZero interacts with the FPFS slot allocation machinery, steering it to yield favorable outcomes rather than doing the optimization by itself. In a strict sense, RegulationZero is a meta-planner for the FPFS slot allocation algorithm. 1.4  Paper Organization The remainder of this paper is organized as follows. Section 2 provides a concise review of the literature on Traffic Management Initiative (TMI) optimization, with particular emphasis on ground delay strategies. Section 3 introduces the proposed framework, formalized as a cascaded optimization scheme comprising three main components: a MCTS that guides the regulation search process, a flow-level regulation proposal engine addressing each overloaded TFV, and a slot allocation algorithm responsible for computing individual flight delays. Finally, to assess the effectiveness of the proposed methodology, we conduct a large-scale experiment simulating a half day of pan-European air traffic with over 20,000 flights during the 2023 summer peak. The results demonstrate that the framework achieves robust and computationally efficient performance under realistic operational conditions. 2  Literature Review 2.1  Trajectory Space Slot Optimization Methods Classical slot allocation in Air Traffic Flow Management (ATFM) originates from ground-holding formulations that optimally assign departure delays under capacity constraints. The foundational single-airport static problem, as proposed by Richetta and Odoni in [ 11 ] , established exact optimization principles for minimizing total delay. This formulation was subsequently extended to multi-airport settings, where coordinated delay assignments across interconnected airports were shown in [ 12 ] to yield globally consistent scheduling solutions. Building on these developments, network-flow models later incorporated en-route capacities and routing decisions, anchoring the minimize-total-delay paradigm and demonstrating scalability to realistic traffic networks [ 13 , 14 ] . In European operations, the practical counterpart of these optimization concepts has long been institutionalized through the CASA process, implementing FPFS principles codified in the ATFCM manual. Recent advances in ATFM slot allocation and trajectory space optimization cluster around three interrelated methodological categories: 2.1.1 Stochastic and MILP formulations under capacity and uncertainty Extending beyond single-airport scheduling, recent research integrates airport and fix capacities in multi-airport system (MAS) formulations. Wang et al. [ 15 ] and Liu et al. [ 16 , 17 , 18 ] proposed mixed-integer and robust optimization models that explicitly capture uncertainties in flight and execution times through chance-constrained formulations. These models achieve tractable MILP representations that enhance schedule robustness with limited displacement amplification. Complementarily, He and Pan [ 19 ] coupled capacity-envelope estimation with slot allocation, thereby integrating strategic flow control with empirically grounded throughput constraints. 2.1.2 Market mechanisms and meta-heuristics To accommodate heterogeneous airline valuations and ensure privacy in collaborative decision-making, a number of research has introduced auction-based and credit-driven reallocation mechanisms for ATFM slots. Schuetz et al. [ 20 ] and Lee et al. [ 21 ] proposed frameworks that integrate market incentives, grandfather rights, and scalable heuristics within privacy-preserving optimization architectures. In parallel, meta-heuristic approaches such as those developed by Tian et al. [ 22 ] use evolutionary algorithms to solve large-scale, multi-objective ATFM problems, generating Pareto-efficient schedules that balance delay, cost, and fairness. For large and tigtly-constrained problems, such as single- and multi-airport settings, enhanced evolutionary and learning-inspired heuristics have delivered high-quality solutions at scale: for example, an estimation-of-distribution metaheuristic coordinating multiple ATFM measures for slot allocation [ 22 ] , and iterated local search / variable neighborhood search tailored to the simultaneous, system-wide slot allocation problem [ 23 ] . From the airline perspective during severe airspace flow programs, genetic algorithms that encode route and slot decisions have been shown to reduce disruption and cost [ 24 ] . Beyond pure slotting, hybrid metaheuristics designed by Chaimatanan , Delahaye , and Mongeau strategically deconflict trajectories at continental scale jointly adjusting routes and departure times to balance safety and efficiency [ 25 ] . Complementing these, co-evolutionary genetic algorithms have been applied to ATFM under dynamic capacity, illustrating how cooperative search can handle network-level congestion while respecting capacity constraints and time-slot assignments [ 26 ] . 2.1.3 Network-wide, multi-objective fairness, connectivity, and environmental goals Another emerging direction embeds broader operational and environmental criteria into slot allocation. Keskin and Zografos [ 27 ] , Feng [ 28 ] , and Dalmau [ 29 ] formulated bi-objective and lexicographic optimization models that incorporate fairness across airlines, onward connectivity preservation, and environmental impact mitigation (e.g., noise abatement). These formulations explicitly characterize trade-offs between delay displacement, connectivity protection, and sustainability, contributing to a framework for MAS-aware, data-driven slot allocation that is both robust to uncertainty and sensitive to multi-stakeholder objectives. Empirical analyses and simulation-based studies further contextualize these approaches. Lau et al. [ 30 ] evaluated CASA-like heuristics at network scale, benchmarking their performance against optimization-based baselines. Ivanov et al. [ 31 ] proposed a two-level mixed-integer model that shapes delay distributions to mitigate propagation effects and improve adherence to airport slot assignments. Similarly, Chen et al. [ 32 ] demonstrated that chance-constrained formulations can incorporate capacity uncertainty while maintaining computational tractability for large-scale instances. Most recently, Berling, Lau, and Gollnick [ 33 ] integrated a constraint-reconciliation and column-generation allocator into R-NEST, achieving quantifiable reductions in both primary and reactionary delays while respecting operational constraints on the day of execution. Despite important advances, most prior work frames ATFM as direct, deterministic flight-level slot/delay allocation, which typically demands deep re-engineering, testing, and certification of legacy systems. This flight-centric view is also not well-aligned with practice: human operational expertise typically in regulation space in terms of rates, occupancy, counts; making controller intuition hard to inject into slot-based optimizations, as well as complicating the verification of the regulation plan’s soundness against edge cases. 2.2  Why Regulations still Persist after Decades of Slot Optimization Research In essence, current European ATFCM operations prioritize predictability and stability of outcomes over strict computational optimality, due to its specific context of relying on CDM as the central philosophy linking towers, NM, and airline operations. Owing to the inherently volatile nature of upstream data ranging from dynamic flight plan updates and reactive knock-on delays to unpredictable weather phenomena, routine updates such to EOBT and DPI routinely trigger recalculations within the ETFMS. While the theoretical foundation of slot optimization is well-established, executing a full recalculation cycle every 15 minutes in response to upstream perturbations would lead to a cascade of delay reassignment messages that must be sent, processed, and validated. This process imposes an exceptionally high communication and coordination burden across all actors. Consequently, controllers are explicitly advised to avoid unnecessary CTOT modifications, especially once a significant number of Slot Allocation Messages have already been disseminated [ 34 ] . Furthermore, excessive delay reassignment can undermine airline schedule integrity, complicating fleet and crew planning. In practice, the combination of the FPFS slot allocation and prudent regulation planning produces relatively stable flight sequences and predictable CTOTs that are revised only when input conditions or capacity constraints materially change [ 34 ] . Under this regime, ETFMS autonomously issues adjusted CTOTs when necessary, thereby allowing operational actors to concentrate on higher-level collaborative decision-making and coordination. 2.3  Regulation Space Optimization Methods Despite the pressing operational needs, optimization at the regulation level, on the other hand, are rarely explored. [ 35 ] observed that not all regulations are equally important, and building upon that, [ 36 ] proposed to construct regulations greedily by capping traffic flow at nominal capacity. 2.4  Positioning of our Paper The foregoing review showed a clear gap in existing research and operational practice that this paper seeks to address: • In current operations, virtually all ATFM systems worldwide implement slot allocation, whereby delays are churned out by an algorithm following a sets of regulations manually designed by expert flow managers. • Even forthcoming system evolutions such as the Targeted CASA initiative are focused primarily on providing more refined control over traffic selection and rate adjustment, rather than fundamentally replacing the underlying FPFS allocation and regulation mechanisms [ 37 ] . • Existing formulations on automated regulation design insufficiently capture two essential dimensions of a regulatory decision: the adjustment of the regulation rate and the explicit modeling of contributing flows . Consequently, the development of a comprehensive, fully automated regulation planning methodology remains an open challenge. • Eurocontrol also noted that interacting flow management measures can yield complex and sometimes counterintuitive effects [ 34 ] . Therefore, automation of regulation design is a relatively new and under-researched area that could have high-impacts on operational realities. Our paper directly addresses this unfilled operational and methodological gap. We position our contribution as a decision support framework that augments existing ATFM operational processes rather than replacing them. Specifically, we develop an optimization-based methodology that automatically constructs regulation plans by jointly determining rate profiles and flow participation under realistic capacity and connectivity constraints. As a result, the solutions provided by our framework are fully compatible with both current CASA operations and forthcoming Targeted CASA implementations, as the framework accommodates either single-rate or multi-rate specifications across subflows [ 37 ] . 3  Methodology 3.1  Regulations, Regulation Ordering, and Regulation Cascading In European ATFM, a regulation is a flow-management measure that constrains demand to an ATC capacity, and, when activated, triggers the Network Manager’s slot allocator (ETFMS’s CASA Algorithm) to sequence affected flights and issue CTOTs to operators and towers. As shown in Figure 3 , a regulation (or a Traffic Flow Program) typically contains four elements: a reference location (sector/airport/traffic volume), the traffic filtering conditions (the flow to be captured), an active time window, and an allowed entry rate (usually in entries per hour). REGULATION 1. Ref. Location: LECBBAS 2. Flows ¿LEMD 3. Time window 08:00-09:30 4. Entering Flow Rate 25 EUROCONTROL Network Manager PROGRAM (GDP/AFP) 1. Airport or FCA: KSFO 2. Scope To KATL 3. Time window 08:00-09:30 4. Program Rate 25 U.S. FAA’s Ground Delay and Airspace Flow Program Figure 3 : Regulations (EU) and Flow Programs (US) that will serve as input for slot allocation algorithms. The fundamental principle in regulation design is to target traffic volumes (TFVs) exhibiting DCB imbalances. Once identified, the entry rate is capped according to the declared sector capacity that air traffic controllers can safely accommodate. The flow component of the regulation provides operators with more surgical control, enabling targeted interventions on flights contributing to the imbalance while minimizing overall impact and avoiding an excessive number of delay assignment messages [ 38 ] . 3.2  Motivating Example: How the Order of Application Shapes Network Responses As discussed above, regulations may interact in nonlinear and sometimes counterintuitive ways. In the example illustrated in Figure 4 , the sequencing of regulation application can lead to markedly different traffic flow outcomes: • Case 1: A regulation is first applied to TFV A, reducing flow (i) from five to three flights while leaving flow x_{1} (comprised of a single flight) unaffected. A subsequent regulation on TFV C then fully restricts flow x_{1} and reduces flow (ii) from seven to three flights. • Case 2: If the first regulation instead targets TFV C, it may simultaneously affect flows (i) and (ii). Should flow (ii) be scheduled later than flow (i), this regulation could entirely hold all flights in flow (ii) for later release. A subsequent regulation at TFV A would then further constrain flow (i) by reducing its entry rate. These contrasting outcomes underscore the sensitivity of network behavior to the order in which regulations are implemented. In the current operation, this aspect is often overlooked. Regulations are commonly applied simultaneously, and each flight is assigned a delay corresponding to the maximum value among all applicable regulations [ 34 ] . This observation likely explains the “surprising effects” and pronounced volatility frequently reported by operators. Furthermore, the flow patterns considered for a new regulation depend on the set of previously implemented regulations, thereby violating the assumption of a fixed action space, hence poses significant technical challenges for the direct application of conventional metaheuristic or dynamic programming approaches, which typically require an invariant search space. TV A TV B TV C Original Situation x1 x5 x7 TV A TV B TV C Regulation at TV A, then at TV C x1 x3 (i) (ii) TV A TV B TV C Regulation at TV C, then at TV A x3 x1 Figure 4 : The ordering of regulation affects the flows available for the next step. “xN” means the flow contains N flights. 3.3  Problem Formulation Owing to the structural resemblance of our problem to strategic decision-making in chess , we adopt the AlphaZero framework [ 39 ] to derive the optimal sequence of regulations that minimizes DCB imbalances while accounting for delay propagation. Similar to AlphaZero, our framework leverages MCTS to balance exploration and exploitation under the principle of optimism [ 40 ] . At each iteration, the algorithm simulates the application of candidate regulations and propagates the observed rewards backward through the search tree, progressively refining its policy. As the exploration bonus decays over time, the algorithm converges toward a greedy strategy that prioritizes the most frequently visited nodes, corresponding to actions with the highest estimated value. 3.3.1 Definitions Fix a bin width of \Delta=15 minutes. Let the planning day be partitioned into 96 consecutive time bins indexed by \mathcal{T}\equiv\{0,1,\ldots,95\}. For t\in\mathcal{T} , bin t corresponds to the half-open interval [t\Delta,(t+1)\Delta) of minutes after midnight. For integers a\leq b , we use the discrete interval notation [a,b]_{\mathbb{Z}}\equiv\{a,a+1,\ldots,b\}. Let \mathcal{V} denote the finite set of traffic volumes (TFVs). A generic element is v\in\mathcal{V} . Let \mathcal{F} denote the set of flights considered in the planning horizon. For a flight f\in\mathcal{F} that traverses volume v , let e_{v,f}\in[0,24\mathrm{h}) denote the (continuous) entry time into v and x_{v,f}\in(0,24\mathrm{h}] the exit time, with e_{v,f}0,\quad\forall\,t\in[t_{i},t_{f}]_{\mathbb{Z}}. We denote such a segment by h\equiv(v,t_{i},t_{f}) . Maximality means that t_{i}=0 or G_{v,t_{i}-1}\leq 0 , and t_{f}=95 or G_{v,t_{f}+1}\leq 0 . We also define the instantaneous occupancy n_{v}(u)\;\equiv\;\bigl|\{f\in\mathcal{F}:e_{v,f}\leq u\tau_{min}$,}\\ 0\quad\text{otherwise.}\end{cases} We then partition \mathcal{F}_{h} into communities \mathcal{P}_{h}=\{\mathcal{C}_{1},\ldots,\mathcal{C}_{R}\} using the Leiden algorithm, which iteratively refines an aggregation to maximize a weighted modularity [ 41 ] . Each triple (\mathcal{C},[t_{i},t_{f}],\tau) induces a potential regulation candidate \rho(\mathcal{C},[t_{i},t_{f}],\tau)\;\equiv\;(\,v_{h},\ t_{i},\ t_{f},\ \tau\,). Figure 7 : A sample flow extracted from the Community Detection algorithm that is relevant to the hotspot segment LECSRTA (11:30-12:15, 23/07/2023) that could be subjected to regulation. The flow contains flights using Madrid and Paris airspaces. 3.4.4 Flow Selection Heuristics The flow extraction step in Section 3.4.3 yields a collection of candidate flows \mathcal{P}_{h}=\{\,\mathcal{C}_{1},\,\mathcal{C}_{2},\,\ldots,\,\mathcal{C}_{R}\,\} associated with the hotspot h\equiv(v_{h},t_{i,h},t_{f,h}) . Because individual flows often traverse multiple TFVs concurrently, we introduce three heuristic metrics to measure a flow’s potential to alleviate simultaneous overloads across several volumes, while mitigating the risk of inducing secondary imbalances elsewhere in the network. Flow Pressure. To quantify the overall contribution of a flow \mathcal{C}_{j} to network-wide overloads, we define its flow pressure as the cumulative excess demand induced by the flights in \mathcal{C}_{j} across all affected TFVs and rolling-hour bins. Let \mathcal{V}(\mathcal{C}_{j})\;\equiv\;\bigcup_{f\in\mathcal{C}_{j}}\mathcal{V}(f) denote the set of volumes traversed by at least one flight in \mathcal{C}_{j} . For each v\in\mathcal{V}(\mathcal{C}_{j}) and t\in\mathcal{T} , let \mathcal{F}_{v,t}(\mathcal{C}_{j})\subseteq\mathcal{C}_{j} be the subset of flights of \mathcal{C}_{j} entering v during bin t , and define their induced demand in that bin as E_{v,t}(\mathcal{C}_{j})\;\equiv\;|\mathcal{F}_{v,t}(\mathcal{C}_{j})|. The corresponding rolling-hour contribution of \mathcal{C}_{j} at (v,t) is D_{v,t}(\mathcal{C}_{j})\;\equiv\;\sum_{k=0}^{3}E_{v,\,t+k}(\mathcal{C}_{j}). Then, the flow pressure for \mathcal{C}_{j} during the current plan s is P_{h}(C_{j}\,|\,s)\;\equiv\;\sum_{v\in\mathcal{V}(\mathcal{C}_{j})}\sum_{t\in[t_{i,h}-\Delta_{h},\,t_{f,h}]_{\mathbb{Z}}\cap\mathcal{T}}\Bigl[\,D_{v,t}^{(s)}-C_{v,t}\,\Bigr]_{+}\;\cdot\;\frac{D_{v,t}(\mathcal{C}_{j})}{\displaystyle|\mathcal{F}_{v,t}|}. (5) The first component, \Bigl[\,D_{v,t}^{(s)}-C_{v,t}\,\Bigr]_{+} , represents the total overload observed at bin (v,t) . The second component quantifies the share of this overload that can be attributed to the flow \mathcal{C}_{j} . The normalization factor ensures that the measure is not biased toward larger traffic flows merely due to their higher number of flights. Conceptually, P_{h}(\mathcal{C}_{j}\,|\,s) captures the degree to which the flights comprising \mathcal{C}_{j} are involved in simultaneous capacity exceedances throughout the network. TV A TV B TV C TV D Flow X Flow Y Figure 8 : Flow Heuristic Example Setting. In the example scenario depicted in Figure 8 , Flow X has higher pressure since it has the potential to relieve two overloaded hotspots (TV A and B), compared to only one (Flow Y). Flow’s Slacks. We now introduce a family of metrics designed to quantify the remaining capacity headroom along a flow’s footprint. These metrics capture the spare capacity of the most constrained TFV encountered by the flow. A small slack value implies that the local capacity margin is narrow, suggesting that interventions may heighten the risk of secondary hotspots emerging. For p,q\in\mathcal{V} , define the empirical, directional travel-time set \mathcal{T}_{p\to q}\;\equiv\;\bigl\{\,e_{q,f}-e_{p,f}\,:\,f\in\mathcal{F},\ \text{$f$ traverses $p$ then $q$ with }e_{p,f}0 if v is (on average) upstream of v_{h} , and \Delta_{v,h}<0 if v is downstream. Fix a hotspot h=(v_{h},t_{i,h},t_{f,h}) , a current partial plan s , and a candidate flow \mathcal{C}\subseteq\mathcal{F} extracted for h (Section 3.4.3 ). Let \Delta=15 minutes and b(u)\equiv\lfloor u/\Delta\rfloor be the bin map. For a nominal additional delay M\in\mathbb{R}_{+} (minutes) induced by a slot allocator (e.g., CASA) at v_{h} , the flights in \mathcal{C} that would have entered the hotspot around bin t are expected to load another TV v around the aligned bin \phi(v,t;M)\;\equiv\;b\!\bigl(t\Delta+M-\Delta_{v,h}\bigr)\;\in\;\mathcal{T}. Define the flow’s M -slack as the worst-case residual capacity, across its footprint: \mathrm{Slack}_{M}(\mathcal{C}\mid h,s)\;\equiv\;\min_{\begin{subarray}{c}v\in\mathcal{V}(\mathcal{C})\\ t\in I_{h}\end{subarray}}\Bigl\{C_{v,\,\phi(v,t;M)}\;-\;D_{v,\,\phi(v,t;M)}^{(s)}\;+\;D_{v,\,\phi(v,t;M)}(\mathcal{C})\Bigr\}. (6) Here: • \mathcal{V}(\mathcal{C})=\bigcup_{f\in\mathcal{C}}\mathcal{V}(f) is the set of TVs traversed by at least one flight in \mathcal{C} ; • I_{h}=[t_{i,h}-\Delta_{h},\,t_{f,h}]_{\mathbb{Z}}\cap\mathcal{T} is the hotspot influence interval (Section 3.4 ); • D_{v,t}^{(s)} is the current rolling-hour demand at (v,t) under plan s ; • D_{v,t}(\mathcal{C}) is the rolling-hour contribution of \mathcal{C} at (v,t) as in Section 3.4 . The formulation can be interpreted as computing the residual capacity after removing the flow’s own contribution from the total demand. In other words, it measures how much spare capacity remains if the flow were not participating in the regulation. By taking the minimum over all v\in\mathcal{V}(\mathcal{C}) and t\in I_{h} , ( 6 ) identifies the most restrictive point along the flow’s trajectory, or the tightest bottleneck it would encounter when a regulation is applied at v_{h} with the nominal delay M . In our framework, the regulation of a flow \mathcal{C} does not change its TV footprint \mathcal{V}(\mathcal{C}) ; it primarily shifts the entry times of its flights. Consequently, any secondary hotspot that a regulation might induce must occur within \mathcal{V}(\mathcal{C}) . We define two measures: \mathrm{\texttt{Slack15}}(\mathcal{C}\mid h,s)\;\equiv\;\mathrm{Slack}_{M=15}(\mathcal{C}\mid h,s),\qquad\mathrm{\texttt{Slack30}}(\mathcal{C}\mid h,s)\;\equiv\;\mathrm{Slack}_{M=30}(\mathcal{C}\mid h,s). • Slack15 reflects how easily the flow can be modestly metered (small rate reduction) without creating new overloads elsewhere. A positive value indicates sufficient headroom across the footprint for approximately 15 minutes of additional delay at the hotspot. • Slack30 reflects the robustness of more aggressive metering (larger rate reduction). Finally, we define a surrogate function for flow selection: \Phi(\mathcal{C}_{j})=w_{pressure}P_{h}(\mathcal{C}_{j}|s)+w_{Slack15}Slack15(\mathcal{C}_{j})+w_{Slack30}Slack30(\mathcal{C}_{j}) (7) 3.5  Regulations Proposing Given a hotspot h=(v_{h},t_{i,h},t_{f,h}) selected from the current partial plan s , we perform a targeted local search that converts the flow structure around h into a small set of high-value regulation candidates. The search returns up to K proposals \rho=(v_{h},t_{i,h},t_{f,h},\tau) , each evaluated with the FPFS slot allocator (Section 3.3.2 ) on the full traffic set and scored by its incremental improvement \Delta J\equiv J(s)-J(s\cup\rho) . Inputs and Hyperparameters. • Flow set \mathcal{P}_{h}=\{\mathcal{C}_{1},\ldots,\mathcal{C}_{R}\} - the set of candidate flows extracted for hotspot h . • max_flows_in_regulation (M_{\max}) : maximum number of flows allowed to be jointly regulated (default: 5 ). • top- k proposals (k_{\mathrm{top}}) : number of best-performing regulation proposals returned to the MCTS. • min_flights_per_flow (N_{\min}) : minimum number of flights a flow must contain to be considered eligible. • Grid of rate factors \Gamma : discrete set of candidate rate multipliers used for grid search, e.g. \Gamma=\{0.6,0.7,0.8,0.9,1.0\} . Rate initialization. Let C_{\min}(h)\equiv\min_{t\in I_{h}^{\mathrm{eff}}}C_{v_{h},t} be a conservative per-hour capacity bound for the effective window. For a set of flows S\subseteq\mathcal{P}_{h} , define the demand share within I_{h}^{\mathrm{eff}} as p(S\,|\,s)\;\equiv\;\frac{\sum_{t\in I_{h}^{\mathrm{eff}}}\omega_{t}\,D_{v_{h},t}(S)}{\sum_{t\in I_{h}^{\mathrm{eff}}}\omega_{t}\,D_{v_{h},t}^{(s)}},\qquad\omega_{t}\;\equiv\;\bigl(D_{v_{h},t}^{(s)}-C_{v_{h},t}\bigr)_{+}+\varepsilon, with a small \varepsilon>0 added to avoid division by zero. The weights \omega_{t} emphasize bins experiencing positive overloads. The nominal (or baseline) rate is defined as \tau_{0}(S)\;\equiv\;\mathrm{round}\bigl(p(S\,|\,s)\bigr), and the set of candidate rates explored during grid search is given by multiplicative perturbations of this nominal value: \mathcal{T}(S)\;=\;\bigl\{\,\tau_{0}(S)\cdot(1+\gamma)\;:\;\gamma\in\Gamma\cup(-\Gamma)\,\bigr\}. The search explores unions of the top- r flows (by \phi ) for r=1,\ldots,R_{\max} and, for each union, evaluates a set of rates around \tau_{0} . Each candidate regulation is simulated via FPFS on the full traffic set, and scored by \Delta J . Flow Extractor Flows Hotspots Flow Scorer Flow Pressure: \displaystyle P_{h}(C_{j}|s) Flow’s 15-min Slack \displaystyle Slack15 Flow’s 30-min Slack \displaystyle Slack30 Flow Score \displaystyle\Phi num_flows = 2 \displaystyle C_{1}=\arg\max_{C_{j}}\Phi(C_{j}) \displaystyle C_{2}=\arg\max_{C_{j}\neq C_{1}}\Phi(C_{j}) Objective Evaluator Objective Improvement \displaystyle\Delta=J_{before}-J_{after} Rates \displaystyle r_{1},r_{2} Figure 9 : The Regulation Proposal Engine’s Main Components, with num_flows = 2 . Figure 9 provides a high-level view of the entire data-flows within the Regulation Proposal engine employed by Regulation Zero. 3.6  RegulationZero: Hierarchical Monte-Carlo Tree Search for Regulation Sequence Optimization 3.6.1 Flow Regulations as a Markov Decision Process Problem As discussed earlier, it is essential to solve the traffic regulations in sequence. This motivates us to formulate the regulation search as planning in a finite-horizon Markov decision process (MDP) \mathcal{M}=(\mathcal{S},\mathcal{A},P,R,\gamma) , with state space \mathcal{S} , joint action space \mathcal{A}=\mathcal{R}\times\mathcal{H} where a=(r,h) combines a regulation proposal r\in\mathcal{R} and a hotspot h\in\mathcal{H} , transition kernel P(\cdot\mid s,a) , reward R(s,a)\doteq\Delta J(s,a) given by the objective improvement (weighted reduction of exceedances and delay), and discount \gamma\in(0,1] . For an episode s_{0},s_{1},\dots,s_{T} , the objective is to maximize the expected discounted return J^{\pi}(s_{0})\;=\;\mathbb{E}_{\pi}\!\left[\sum_{t=0}^{T-1}\gamma^{t}\,\Delta J_{t}\right],\quad\text{with }s_{t+1}\sim P(\cdot\mid s_{t},a_{t}),\;a_{t}\sim\pi(\cdot\mid s_{t}). (8) Because applying regulations results in a deterministic outcome: P(s_{t+1}|s_{t},a_{t})=\delta_{\{s=s_{t+1}\}}. \displaystyle s_{root} \displaystyle s_{2} \displaystyle s_{1} \displaystyle r_{2}|s_{2} Expansion \displaystyle s_{root} \displaystyle s_{2} \displaystyle s_{1} \displaystyle s_{3}\ Backup \displaystyle s_{root} \displaystyle s_{2} \displaystyle s_{1} \displaystyle r_{1}|s_{2} \displaystyle r_{2}|s_{2} Selection … Until max_depth … Figure 10 : Illustration of the three main phases of the MCTS algorithm employed by RegulationZero. The key steps of our MCTS implementation version can be described in Figure 10 . 3.6.2 Hierarchical action and priors. Because the flow extraction result \mathcal{P}_{h} is tied to the selected hotspot segment h , we factor the search prior policy as \pi(a\mid s)\;=\;\pi_{H}(h\mid s)\,\pi_{R}(r\mid h,s), and assume that the priors P_{H}(h\mid s)>0 and P_{R}(r\mid h,s)>0 . Let \mathcal{H}(s) be the set of hotspot segments. We define the severity of a hotspot as the cumulative exceedance across its segment under plan s : \phi(h\mid s)\;\equiv\;\sum_{t\in[t_{i,h},\,t_{f,h}]_{\mathbb{Z}}}\Bigl(D_{v_{h},t}^{(s)}-C_{v_{h},t}\Bigr)_{+}, (9) where (x)_{+}\equiv\max\{x,0\} . We sample hotspots according to a tempered softmax: P_{H}(h\mid s)\;=\;\frac{\exp\!\bigl(\phi(h\mid s)/\tau_{H}\bigr)}{\displaystyle\sum_{h^{\prime}\in\mathcal{H}(s)}\exp\!\bigl(\phi(h^{\prime}\mid s)/\tau_{H}\bigr)} (10) Conditioned on h , the RegulationProposal engine returns a finite candidate set \mathcal{R}(h,s)=\{r_{1},\ldots,r_{m}\} together with predicted immediate improvements \widehat{\Delta J}(s,h,r) . Then, the regulation to be selected will follow the PUCT rule. 3.6.3 PUCT-driven proposal selection Within the search tree, we select proposals using a PUCT criterion instantiated for the (h,r) branching factorization: r^{*}\;=\;\arg\max_{r}\left[Q(s,h,r)\;+\;c_{\mathrm{PUCT}}\,P_{R}(r\mid h,s)\,\frac{\sqrt{\sum_{b}n(s,h,b)}}{1+n(s,h,r)}\right], (11) where Q(s,h,r) is the current value estimate and n(s,h,r) counts visits to child (s,h,r) . The prior P_{R}(r\mid h,s) guides the search process to explore new regulations in the beginning of the search phase, but gradually subsides, rendering the policy becoming more greedy as total visits \sum_{b}n(s,h,b) increase. After a regulation is selected and applied, the corresponding delays are imposed on the affected flights, and the flight list is updated accordingly. This update triggers a re-evaluation of active hotspots and a new flow extraction step. The reward obtained at iteration k is defined as \Delta J_{k}=\hat{\Delta J}(s,h,r^{*}) . The algorithm then continues to extend the sequence until reaching a predefined search depth. 3.6.4 Value backups At the end of the trajectory, the cumulative discounted reward is: G\!=\!\sum_{k}\gamma^{k-1}\Delta J_{k}. (12) For each visited node on the path, we perform the following updates: \displaystyle n(s,h,r) \displaystyle\leftarrow n(s,h,r)+1, (13) \displaystyle W(s,h,r) \displaystyle\leftarrow W(s,h,r)+G, (14) \displaystyle Q(s,h,r) \displaystyle\leftarrow\frac{W(s,h,r)}{n(s,h,r)}. (15) All the steps of the MCTS can be summarized in Algorithm 1 . Algorithm 1 RegulationZero: Hierarchical, KL-Regularized MCTS 1: Input: priors P_{H},P_{R} ; severity \phi ; discount \gamma ; c_{\mathrm{PUCT}} ; max_depth 2: for simulation =1,\dots,N do 3: s\leftarrow s_{0} ; path \leftarrow[\;] ; d\leftarrow 0 4: while d<\texttt{max\_depth} and s not terminal do 5: Hotspot: sample h\sim\pi_{H}(\cdot\mid s)\propto P_{H}(\cdot\mid s)\exp(\phi/\tau_{H}) 6: if some (s,h,\cdot) unexpanded then 7: retrieve/update \{r(h)\} via RegulationProposal 8: end if 9: Proposal: select r by ( 11 ) 10: Append (s,h,r) to path 11: Execute a=(h,r) ; observe \Delta J ; sample s^{\prime}\sim P(\cdot\mid s,a) 12: s\leftarrow s^{\prime} ; d\leftarrow d+1 13: end while 14: Compute return G\leftarrow\sum_{t=0}^{d-1}\gamma^{t}\Delta J_{t} 15: for each node (s,h,r) in path do 16: update n,W,Q with G 17: end for 18: end for 19: return action at root with largest visit count or value 3.7  Comments on Architecture Design In this section, we provide an overarching rationale for the design of our framework. Conventional approaches in reinforcement learning (RL) studies often formulate the action space around atomic operations, such as adding or removing a regulation. However, our experiments indicate that this design frequently leads to cyclic exploration patterns, as the vast combinatorial space of possible regulatory modifications causes the policy to become trapped in repetitive loops. While one could impose a simulation budget to curb unbounded exploration, the long trajectory lengths inherent to such settings substantially weaken the gradient signal during backpropagation, thereby impeding effective learning. The role of the regulation proposal (RP) is fundamental in ensuring the stability of the MCTS search process. One valid view of RP is that RP is the local-search extension of MCTS’s exploration at each node. Not only would this help narrowing down the search space, but Following the analysis presented in Appendix A , RegulationZero optimizes a KL-regularized objective that promotes structured exploration at both the hotspot and regulation levels: \Omega_{s}(\pi)=\tau_{h}\,\mathrm{KL}\!\left[\pi_{H}(\cdot\,|\,s)\,\|\,P_{H}(\cdot\,|\,s)\right]+\mathbb{E}_{h\sim\pi_{H}}\!\left[\lambda_{R}(s,h)\,\mathrm{KL}\!\left[P_{R}(\cdot\,|\,h,s)\,\|\,\pi_{R}(\cdot\,|\,h,s)\right]\right]. (16) The first term, \tau_{h}\,\mathrm{KL}[\pi_{H}(\cdot|s)\|P_{H}(\cdot|s)] , represents a reverse KL-divergence akin to that used in the Soft Actor-Critic (SAC) formulation [ 42 ] , favoring mode-seeking behavior that concentrates attention on the most critical hotspots h . In contrast, the second term, \mathrm{KL}[P_{R}(\cdot|h,s)\|\pi_{R}(\cdot|h,s)] , takes the form of a forward KL-divergence, encouraging mode-covering exploration within the regulation space. Conceptually, this separation guides the policy to focus relief efforts on the most severe hotspots, while simultaneously enabling a comprehensive and diverse search across the regulatory landscape. The empirical results discussed in the following section illustrate how these dual objectives manifest in practice, notably through the temporary steps that deliberately “worsens the situation” before improving it, despite better options were available at disposal. 4  Results To validate the proposed framework, we conducted a comprehensive set of evaluations using planned flight plan data obtained from EUROCONTROL’s DDR2 exported from NEST. However, we reimplemented the Simulator (What-If engine) instead of using R-NEST for CASA on our open ATFM research platform Cortex 1 1 1 Source code is available at https://github.com/thinhhoang95/project-cortex . . Performance was benchmarked against a Simulated Annealing (SA) baseline to assess both solution quality and computational efficiency. All experiments were carried out on a dedicated cloud instance equipped with an AMD Ryzen Threadripper 7960X processor and 64 GB of RAM. All implementations are realized in Python 3.13 with Numba. All objective values are reported with weight w_{CAP}=10,w_{DELAY}=1 or one occupancy exceedance is equivalent to 10 minutes of delay. 4.1  Performance & Results at Scales For this section, we focus on comparing the performance and optimality of solutions of RegulationZero compared against the SA baseline. We employ the initial traffic dataset consisting of 23,089 flights from midnight to end-of-day of 23rd July, 2023. Table 2 : Hyperparameter Configuration for RegulationZero Parameter Value sims 128 depth 64 commit_depth 64 flows_threshold 0.6 flows_resolution 1.0 max_hotspots_per_node 12 k_proposals_per_hotspot 5 puct_c 64 gamma 0.999998 regulation_selection_softmax_temperature 24.0 hotspot_sampling_temperature 6.0 Table 3 : Hyperparameters used for the optimization algorithm. Parameter Name Value iters 10,000 T0 (Initial Temperature) 15.0 cooling (Cooling Rate) 0.999 T_min (Minimum Temperature) 1\times 10^{-9} max_delay_per_flight_min 240 The hyperparameters of RegulationZero are set according to Table 2 , the SA hyperparameters are given in Table 3 . These hyperparameters were refined from the automatically tuned values retrieved from Optuna with 15 run trials to give the best results for both algorithms. We divide the flight set into three run cases: the three-hour case that spans from 10:00 to 13:00 where most hotspots occurred, the six-hour case that spans from 10:00 to 16:00, and the whole day of operation case. The goal is to test the effectiveness of RegulationZero against the problem size. A sample of RZ’s output can be seen from Figure 18 . (a) 3h case (b) 6h case = (c) Whole-day case Figure 11 : Per-step reward obtained by RegulationZero for the optimal regulation sequence for the 3h, 6h, and whole-day cases, respectively. When the commit depth is set to 64, we observe that RegulationZero tends to exhaust its available regulatory commit budget in an effort to further optimize the objective function. In the 3h case, which contains the largest number of hotspots, it is challenging for the regulatory mechanism to fully dissipate congestion without merely shifting it elsewhere. RegulationZero often deploys numerous small-scale regulations that yield limited or even negative direct benefit, yet help reorient traffic patterns so that subsequent regulatory actions can exert a more substantial effect (Figure 11(a) ). This pattern is particularly evident for regulations applied later in the sequence. Similar patterns can be seen in the 6h and the whole-day case (Figure 11(b) and 11(c) ), though the late “impactful” regulations did not occur as these cases were generally easier to solve without lots of traffic reorientation. The mode-seeking behavior of hotspots is clearly reflected in these reward trajectories: the most impactful regulations are typically executed first and target the most severe hotspots. Consequently, RegulationZero, like many other search and optimization algorithms, exhibits anytime performance, meaning that the search can be terminated early when a less optimal but acceptable solution suffices. Table 4 : Comparison of RZ Performance on Three Problem Sizes Criteria 3h 6h Whole-day Number of Regulations 68 67 100 Number of Flights Involved 1193 1156 2145 Max Run Time (s) 12742 10144 12801 Table 5 : Comparison of SA Performance on Three Problem Sizes Criteria 3h 6h Whole Day Acceptance Rate 0.482 0.489 0.485 Max Run Time (s) 6419 6552 6448 Table 6 : Comparison of Results for RZ and SA Methods Case Final Objective Improvements Total Delay (min) Number of Flights RZ SA RZ SA RZ SA 3h 2017 4061 3823 1439 243 308 6h 2859 4157 4061 1393 266 312 Whole Day 9888 6452 8122 1688 525 344 (a) Efficiency per Regulation. (b) Efficiency per Affected Flight. Figure 12 : Efficiency Metrics of RZ and SA. RegulationZero and SA’s problem solving abilities can be summarized in Table 6 with additional performance information provided in Table 4 and Table 5 . As the planning horizon expands, RZ demonstrates pronounced efficiency at scale. Its improvement per minute of delay more than doubles (0.53 to 0.70, and then to 1.22 for whole-day scale), while the improvement per regulation increases roughly 3.3 times (from roughtly 30 to 43, and then to 99). At the full-day horizon, RZ achieves near parity inimprovement per affected flight with SA baseline: 18.83 vs. 18.76, despite the additional FPFS constraint (Figure 12 ). This indicates that when RZ does impose delays, their marginal utility is comparable to those generated by SA. A particularly distinctive trait of RZ is its selectivity: only about 20 to 25% of flights involved in its regulations experience actual delays (20.4%, 23.0%, 24.5%), meaning the majority of flights touched by the regulation plan remain on schedule. For shorter horizons (3h/6h), RZ delays 21% and 15% fewer flights than SA (243 vs. 308; 266 vs. 312) while still securing substantial objective gains. Figure 13 : Evolution of Objective Improvements with time for both RZ and SA, capped to a 90-minute compute budget. SA curves observed delay due to heat-up phase. Figure 13 illustrates the evolution of solution quality over time. The results clearly indicate that RZ exhibits weaker performance on smaller-scale problems, where SA dominates once the compute time exceeds approximately 20 minutes. In contrast, for large-scale instances, RZ consistently outperforms SA across the entire runtime horizon, demonstrating strong anytime characteristics. This property makes RZ appealing for tactical deployment scenarios, where large-scale problems must be resolved frequently under stringent computational time constraints, or very large scale problem that needs to be solved pre-tactically. 4.2  Hyperparameter and Ablation Study As RegulationZero involves a multitude of tunable parameters, we concentrate on a subset of hyperparameters that exert the most significant influence on its performance. Consistent with standard RL frameworks, our analysis emphasizes those parameters that govern the trade-off between exploration and exploitation. 4.2.1 Number of Hotspots To assess the impact of constraining RegulationZero to the top- k hotspots ranked by severity, we execute the algorithm using the hyperparameter configurations listed in Table 2 , with max_hotspots_per_node set to 3, 6, and 12, respectively. The corresponding benchmark results are summarized in Table 7 . It is worth noting that the outcomes for the 12-hotspot configuration may exhibit slight variations relative to those reported in the preceding section, owing to the inherent stochasticity of the algorithm. Table 7 : Comparison of Results for 3, 6, and 12 hotspots allowed to be selected by RZ. Case Final Objective Improvements Total Delay (min) Number of Regulations Number of Flights 3 hotspots 817 5063 24 324 6 hotspots 4929 7141 61 448 12 hotspots 11264 7686 82 470 (a) Efficiency per Regulation. (b) Efficiency per Affected Flight. Figure 14 : Efficiency Metrics’ Relationship with Number of Hotspots Allowed to be Discovered by RZ. The results indicate that restricting RegulationZero to only the most severe hotspots substantially diminishes its capacity to resolve DCB imbalances. Despite the modest expansion in the number of delayed flights, the overall improvement more than doubles suggesting that a broader hotspot set enables the discovery of high-leverage interventions. This trend is further reflected in the reduction of flights regulated per action, from 13.5 to 5.73 indicating that the resulting regulations become more targeted and efficient. These results point in the same direction as noted by [ 35 ] that only a few regulations possess significant leverage on the DCB situation, and these regulations do not usually coincide with the most severe hotspots. 4.2.2 PUCT Term and Number of Simulations These two hyperparameters control the amount of exploration. In our first experiment batch, we keep the number of simulations constant, while increasing PUCT. The results are summarized in Table 8 . Table 8 : Comparison of Results for different PUCT settings. Case Final Objective Improvements Total Delay (min) Number of Regulations Number of Flights PUCT=32+SIMS=12 10899 8621 85 534 PUCT=64+SIMS=12 10779 9191 96 584 PUCT=128+SIMS=12 9194 8356 83 554 PUCT=32+SIMS=4 9233 9317 89 580 PUCT=64+SIMS=8 9901 8589 79 545 PUCT=128+SIMS=16 10008 7972 83 480 (a) Efficiency per Regulation. (b) Efficiency per Affected Flight. Figure 15 : Efficiency Metrics’ Relationship with PUCT and SIM Values Used by RZ. Although the initial outcomes may appear counterintuitive, they can be explained by the randomized nature of exploration in our implementation. Specifically, increasing the PUCT term without proportionally expanding the number of simulations amplifies the variability of rewards, thereby impairing the learning efficiency of RZ. This effect manifests as a monotonic decline in performance across all evaluated metrics, including both the objective value and regulatory efficiency (Figure 15 ). When the increase in the PUCT term is accompanied by an increasing number of simulations, a partial restoration of exploration efficacy can be observed. The additional simulations yield more reliable reward signals, which reflected through the improving trend illustrated in Figures 15(a) and 15(b) . 4.2.3 Impact of Flow Scoring Factors In this section, we study the sensitivity of the two heuristic factors built to guide RZ to select the most promising flows: flow pressure, and the flow’s slack. We derived 4 cases and summarized the results in Table 9 . Table 9 : Comparison of Results for Different Flow Feature Weights. Note that all weights are not normalized. Case Final Objective Improvements Total Delay (min) Number of Regulations Number of Flights P=4, S15=0, S30=0 9194 8756 100 524 P=4, S15=0.25, S30=0 10730 9860 93 521 P=6, S15=0.25, S30=0.25 11608 8842 79 514 P=8, S15=0.5, S30=0.5 11191 8939 82 512 The overall trends indicate that all three factors are critical for selecting high-quality flows, as the inclusion Slack15 , and Slack30 jointly enhances performance by approximately 1500 and 900 points, respectively. The configuration (P=8,S15=0.5,S30=0.5) further reveals that among these features, flow pressure exerts the most pronounced influence: increasing the relative weight of the slack-based features leads to a deterioration in the final results. These findings show that tuning these hyperparameters is a complex process, and we hypothesize that the optimal configuration is likely problem-dependent. 4.3  Performance Robustness To examine the replicability of RZ’s scalability on larger problem instances, we re-executed RZ under identical settings for two additional operational days of July 18 and 29, 2023. It is important to note that, due to substantial variation in traffic patterns and the number of scheduled flights across these dates, absolute objective improvements are not directly comparable between instances. Table 10 : Comparison of Results for Different Traffic Dates. Case Baseline Objective Final Objective Improvements Total Delay (min) Number of Regulations Number of Flights 18/07 3h 62610 23870 14060 116 564 18/07 6h 127770 40676 17224 125 650 18/07 24h 567970 79972 26308 111 886 29/07 3h 151720 44299 24881 128 755 29/07 6h 240120 70583 31597 137 931 29/07 24h 758100 110520 33590 106 1187 Figure 16 : Comparisons between different dates on Efficiency Metrics. Table 10 and Figure 16 confirm that RZ’s scaling efficiency remains consistent across different operational days: both regulatory effectiveness and per-flight delay performance improve with longer planning horizons. Nonetheless, substantial variation in absolute performance is evident between dates, thus prompted our closer inspection on the Cortex platform. We note that not only the DCB imbalance was more severe on July 29, but congestion was notably concentrated within large TFVs overseeing major regions as well. As a prominent example: TFV LFMWMFDZ, which manages traffic in the South East of France was overloaded (Figure 17 ), leading to a break down of flow pattern extraction in the community detection module. While this is not a failure per-se, this example highlights the need to adapt the graph edge creation threshold value to specific circumstances. A detailed analysis of how such spatial-structural traffic characteristics modulate RZ’s performance is beyond the scope of this paper but remains an important direction for future research. Figure 17 : The overloaded traffic volume LFMWMFDZ captures flights that do not have a clear ”flow” pattern, thus RZ decided to impose a blanket delay, affecting lots of flights, but unlocked a major exceedance relief. 4.4  Benchmark against Greedy Policy Table 11 presents a benchmark comparison between RegulationZero and a greedy regulation policy that enforces uniform restrictions by capping the entry rate to the capacity threshold defined by the TFVs. For fairness, the greedy policy was constrained to a maximum of 128 regulations, comparable to RZ’s limit of 64 commits, which generally yields between 80 and 120 individual regulations. The comparative outcomes reveal consistently negative improvements across all evaluated instances. This pattern revealed that in absence of a well-formulated regulation strategy, simplistic or blanket interventions merely relocate congestion while paying the cost for delay rather than mitigating it, making this a classic case of Regulation Cascading. Table 11 : Comparison of Results between RZ and Greedy Policy Case RZ’s Final Objective Improvements Total Delay (min) GP’s Finial Objective Improvements Total Delay (min) 18/07 79972 26308 -1656626 204446 20/07 9888 8122 -1330512 178462 29/07 110520 33590 -773837 163417 5  Discussion In this section, we interpret the significance of the results obtained thus far and outline a structured roadmap for advancing RZ toward operational readiness. 5.1  FPFS/Regulations could still be moderately effective for very large scale problem with constrained computation time budget, given that the regulation plan is sound Although it is well established in the literature that slot optimization methods such as SA possseses a substantial advantage in delay efficiency, and our results in fact corroborate this pattern, we find it noteworthy that, with well-structured regulation planning, RZ achieves performance comparable to, and in the large-scale case of whole-day planning, exceeding that of SA. These trends suggest that RZ’s extended regulation sequences can yield higher objective returns at scale, providing greater leverage both per regulation and per affected flight, whereas SA continues to excel in minimizing total delay across problem sizes. The observed convergence in benefit per delayed flight for the full-day scenario implies that, once the system grows sufficiently large, the structure of delays (as captured by RZ’s sequential planning) can offset the quantity or magnitude of delays (as optimized by SA). Taken together, these findings appear to align with the spirit of the No-Free-Lunch theorem: no single method consistently dominates across objectives or scales, even within instances characteristic of ATFM. We believe this is an open and important question of the field, and more research is needed to yield a conclusive answer. 5.2  Realism While RZ’s solutions are designed for compatibility with existing slot allocation algorithms, several discrepancies remain that must be addressed before the system can achieve certifiable status. Most important among these is the validation of the FIFO queue slot allocation against CASA and RBS++. Another important concern pertains to the treatment of demand and capacity profiles. In typical operational settings, these profiles are defined on a rolling-hour basis with a 20-minute stride; operators, however, have the flexibility to modify these parameters to better suit the temporal resolution of the problem at hand. RZ, by contrast, is constrained to a fixed calculation setting, which limits its adaptability for a wide range of DCB scenarios. Furthermore, the preliminary identification of TFVs to regulate within RZ is restricted to hotspots only. While this design choice effectively constrains the search space and improves computational tractability, it simultaneously narrows the spectrum of regulatory options during the exploration phase. Finally, the framework’s long-term value therefore depends heavily on its ability to extend toward a warm-start capability. Such functionality would enable RZ to operate more effectively in pre-tactical and tactical phases, where CASA/RBS++ CTOT recalculation alone is insufficient. These are non-trivial challenges that warrant substantial future research. Another direction is to extend RZ to plan in face of uncertainty in demands and weather scenarios. Without these enhancements, RZ remains primarily limited to strategic or early pre-tactical planning horizons. 5.3  Component Dependency and Expert Knowledge Injection RZ contains many constituting subcomponents, each governed by numerous hyperparameters that influence performance in profound ways. Identifying parameter configurations that adapt seamlessly to diverse operational scenarios therefore represents a complex challenge. As observed in Section 4.3 , certain scenarios might break the community detection algorithm under dense traffic with highly heterogeneous directions. In principle, dynamically adjusting threshold values for larger TFVs could restore the surgical regulatory moves that RZ routinely demonstrates on smaller TFVs. However, it is not yet known at this moment how it will be achieved concretely. Despite these challenges, RZ’s design offers many promising research directions. Its decision logic operates in the same conceptual space as human operators, making it uniquely amenable to the direct infusion of expert judgment. This capability allows practitioners to embed tacit operational knowledge such as local traffic management practices or context-specific routing rules directly into the tree expansion process. This is in contrast with other methods such as the Mixed-Integer Linear Programming (MILP) formulation, which is often demanding about mathematical problem design and relaxations. We believe this integration of human expertise represents one of the most promising frontiers to be discovered, and that RZ could be a stepping stone in realizing a certifiable decision support system in ATFCM. 6  Conclusion In this paper, we introduced RegulationZero, a sequential planning framework purpose-built to model and manage interacting regulations and their order-dependent cascading effects. By shifting optimization into the regulation space and coupling a hierarchical Monte Carlo Tree Search (MCTS) with a structured proposal engine, RegulationZero produces solutions that remain fully compatible with current and emerging slot-allocation processes (e.g., CASA, RBS++, and Targeted CASA), thereby minimizing integration risk. Crucially, the search operates within the same conceptual domain as flow management experts, making the decision process both transparent and intuitively aligned with operational practice. Comprehensive experiments on large-scale European traffic confirm that RegulationZero’s performance is promising on large-scale problems. It exhibits strong anytime properties, achieves higher objective improvements than a trajectory-space simulated-annealing baseline over extended horizons over a reasonable planning time, and remains selective, impacting only a small portion of flights. The approach generalizes across variable traffic conditions and decisively outperforms a naive rate-capping policy that exhibits the characteristics of regulation cascading. Ablation studies further highlight the contribution of structured exploration and of the flow heuristics in discovering high-leverage regulations. Several avenues for further research remain open, including rigorous validation against operational systems and real-world data, systematic integration of expert knowledge into the planning process, and a deeper investigation of hyperparameter sensitivities to better exploit inherent traffic patterns. Appendix A RegulationZero as Regularized Policy Optimization This appendix demonstrates that the formulation of RegulationZero introduced in Section 3 can be interpreted as a form of regularized policy optimization that jointly employs forward and reverse Kullback-Leibler (KL) divergences to shape both hotspot and regulation proposal selections. For tractability, we focus on the simplified setting where only one hotspot/expansion attempt is associated with each node in the search tree , deferring extensions for future research. A.1  RegulationZero attempts to track a policy regularized by a forward KL for hotspot selection and reverse KL for proposal selection If we define the factorized policy \pi(h,r|s)=\pi_{H}(h|s)\pi(r|h,s) over the two priors, and the corresponding regularization term as: \Omega_{s}(\pi)=\tau_{h}D_{\mathrm{KL}}(\pi_{H}(\cdot|s)\parallel P_{H}(\cdot|s))+\mathbb{E}_{h\sim\pi_{H}}\left[\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel\pi_{R}(\cdot|h,s)))\right] (17) Define a general vector of state backup values q=q(s,h,r) , we define the regularized objective as: G_{s}(q)=\sup_{\pi}[\mathbb{E}_{h,r\sim\pi}\left[q(s,h,r)-\Omega_{s}(\pi)\right]] (18) The following Proposition shows that the solution to G_{s}(q) has a decomposition form: Proposition 1 . For each h , let q_{h}(\cdot)=q(s,h,\cdot) and \lambda_{h}=\lambda_{R}(s,h) . The inner maximizer \bar{\pi}_{R}(\cdot|h,s) and its attained value U_{h}(s) solve \bar{\pi}_{R}(r|h,s)=\frac{\lambda_{h}\,P_{R}(r|h,s)}{\alpha_{h}-q_{h}(r)},\quad\text{with }\alpha_{h}>\max_{r}q_{h}(r)\text{ chosen s.t. }\sum_{r}\bar{\pi}_{R}(r|h,s)=1, U_{h}(s)=\sup_{y}\left[q_{h}\cdot y-\lambda_{h}\,D_{\mathrm{KL}}(P_{R}\parallel y)\right]=\alpha_{h}-\lambda_{h}-\lambda_{h}\sum_{r}P_{R}(r|h,s)\log\!\left(\frac{\alpha_{h}-q_{h}(r)}{\lambda_{h}}\right). With inclusive inner values U_{h}(s) , \bar{\pi}_{H}(h|s)\propto P_{H}(h|s)\exp\!\left(U_{h}(s)/\tau_{h}\right),\quad\text{and}\quad G_{s}(q)=\tau_{h}\log\sum_{h}P_{H}(h|s)\exp\!\left(U_{h}(s)/\tau_{h}\right). Thus \bar{\pi} is the nested solution \bar{\pi}_{H}(h|s)\propto P_{H}(h|s)\exp\!\left(U_{h}/\tau_{h}\right),\qquad\bar{\pi}_{R}(\cdot|h,s)\text{ as above.} Proof. We begin by expanding G_{s}(q) : \displaystyle G_{s}(q) \displaystyle=\sup_{\pi}[\mathbb{E}_{h,r\sim\pi}\left[q(s,h,r)]-\Omega_{s}(\pi)\right]=\sup_{\pi}[\sum_{h,r}\pi_{H}(h|s)\pi_{R}(r|h,s)q(s,h,r)-\Omega_{s}(\pi)] \displaystyle=\sup_{\pi}[\sum_{h,r}\pi_{H}(h|s)\pi_{R}(r|h,s)q(s,h,r)-\tau_{h}D_{\mathrm{KL}}(\pi_{H}(\cdot|s)\parallel P_{H}(\cdot|s)) \displaystyle-\sum_{h}\pi_{H}(h|s)\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel\pi_{R}(\cdot|h,s)))] \displaystyle=\sup_{\pi}\bigg[\sum_{h}\pi_{H}(h|s)[\sum_{r}\pi_{R}(r|h,s)q(s,h,r)-\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel\pi_{R}(\cdot|h,s)))] \displaystyle-\tau_{h}D_{\mathrm{KL}}(\pi_{H}(\cdot|s)\parallel P_{H}(\cdot|s))\bigg] \displaystyle=\sup_{\pi_{H}}\bigg[\sum_{h}\pi_{H}(h|s)\sup_{\pi_{R}}[\sum_{r}\pi_{R}(r|h,s)q(s,h,r)-\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel\pi_{R}(\cdot|h,s)))] \displaystyle-\tau_{h}D_{\mathrm{KL}}(\pi_{H}(\cdot|s)\parallel P_{H}(\cdot|s))\bigg] We define the inner problem: U_{h}(q_{h})=\sup_{y}[q_{h}^{\intercal}y-\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel y)] . Given \lambda_{R}(s,h)>0 , the problem is convex in y, and given the constraint for y to be a valid probability distribution, we could define the Lagrangian: \mathcal{L}=q_{h}^{\intercal}y-\lambda_{R}D_{\mathrm{KL}}(P_{R}\parallel y)-\alpha(y_{r}-1) (19) The stationary condition gives: y^{*}=\frac{\lambda P_{R}}{\alpha-q_{h}} (20) and \alpha must solve for: \sum_{r}\frac{\lambda P_{R}(r)}{\alpha-q_{h}(r)}=1 (21) in order to normalize the distribution y=\pi_{R} . The attained value corresponding to y^{*} is: U_{h}(q_{h})=q_{h}^{\intercal}y^{*}-\lambda_{R}\sum_{r}P_{R}(r)\log\frac{P_{R}(r)}{y^{*}(r)}=\alpha-\lambda_{R}-\lambda_{R}\sum_{r}P_{R}(r)\log\bigg(\frac{\alpha-q_{r}}{\lambda}\bigg) We notice that this expression has the same form as in [ 43 ] . Now, given that the inner problem attains its maximum at U_{h}(q_{h}) as derived above, the outer optimization problem can be expressed in the following closed form: \sup_{x\in\Delta(\mathcal{H})}\;x^{\top}U(q_{x})-\tau_{h}\,\mathrm{KL}(x\,\|\,P_{H}), (22) where \Delta(\mathcal{H}) represents the probability simplex over \mathcal{H} . Because this corresponds to the classical maximum-entropy regularized policy optimization formulation [ 44 ] , the optimal solution admits the familiar log-sum-exp (softmax) form: x_{h}^{*}\propto P_{H}(h)\,\exp\!\left(\frac{U_{h}}{\tau_{h}}\right),\qquad x^{*}(h)=\frac{P_{H}(h)\,\exp\!\left(U_{h}/\tau_{h}\right)}{\sum_{h^{\prime}\in\mathcal{H}}P_{H}(h^{\prime})\,\exp\!\left(U_{h^{\prime}}/\tau_{h}\right)} (23) ∎ Proposition 1 says that the factored policy \bar{\pi}=\bar{\pi}_{R}\bar{\pi}_{H} solves the regularized objective maximizing problem G_{s}(q) . The PUCT selection rule ( 11 ) was shown in [ 43 ] to be equal to: a^{*}=\arg\max_{a}\frac{\partial}{\partial n(a)}[q^{\intercal}y-\lambda_{N}D_{\mathrm{KL}}(\pi_{\theta}\parallel\hat{\pi})] (24) which can be viewed as a gradient descent step towards the optimizer of the regularized problem: \bar{\pi}=q^{\intercal}y-\lambda_{N}D_{\mathrm{KL}}(\pi_{\theta}\parallel\hat{\pi}) (25) which in turn has the same solution form y=\lambda_{N}\pi_{\theta}/(\alpha-q) as ( 20 ). In other words, the inner loop’s MCTS attempts to track the policy: \sup_{y}[q_{h}^{\intercal}y-\lambda_{R}(s,h)D_{\mathrm{KL}}(P_{R}(\cdot|h,s)\parallel y)] (26) Combined with the outer loop’s Boltzmann distribution’s form, we can conclude that jointly, the RegulationZero framework tracks the solution for the problem G_{s} ( 18 ). \boxed{\hat{\pi}\approx\bar{\pi}=\arg\max_{\pi}[\mathbb{E}_{h,r\sim\pi}\left[q(s,h,r)-\Omega_{s}(\pi)\right]]}, if the outer loop’s hotspot severity proxy function is assumed to track \phi(s)\approx U(s)=\sup_{y}\left[q_{h}\cdot y-\lambda_{h}\,D_{\mathrm{KL}}(P_{R}\parallel y)\right]. (27) A.2  Sample Complexity Estimation Let N be the total number of root simulations and let n_{H}(h) denote the number of times the hotspot h is selected at the root, so that \sum_{h}n_{H}(h)=N . We write \hat{\pi}_{H},\hat{\pi}_{R} for RegulationZero respectively. For any pair (h,r) we have \displaystyle\bigl|\hat{\pi}(h,r)-\bar{\pi}(h,r)\bigr| \displaystyle=\bigl|\hat{\pi}_{H}(h)\,\hat{\pi}_{R}(r\mid h)-\bar{\pi}_{H}(h)\,\bar{\pi}_{R}(r\mid h)\bigr| \displaystyle\leq\bigl|\hat{\pi}_{H}(h)-\bar{\pi}_{H}(h)\bigr|\;\hat{\pi}_{R}(r\mid h)+\bar{\pi}_{H}(h)\,\bigl|\hat{\pi}_{R}(r\mid h)-\bar{\pi}_{R}(r\mid h)\bigr| \displaystyle\leq\bigl|\hat{\pi}_{H}(h)-\bar{\pi}_{H}(h)\bigr|+\bigl|\hat{\pi}_{R}(r\mid h)-\bar{\pi}_{R}(r\mid h)\bigr|. Taking the supremum over all (h,r) yields the key reduction \|\hat{\pi}-\bar{\pi}\|_{\infty}\;\leq\;\|\hat{\pi}_{H}-\bar{\pi}_{H}\|_{\infty}+\max_{h}\,\|\hat{\pi}_{R}(\cdot\mid h)-\bar{\pi}_{R}(\cdot\mid h)\|_{\infty}. (28) For each hotspot h , assuming that \bar{\pi}_{R}(\cdot\mid h) is locally constant as counts grow, the reversed-KL tracking bound gives \|\hat{\pi}_{R}(\cdot\mid h)-\bar{\pi}_{R}(\cdot\mid h)\|_{\infty}\;\leq\;\frac{|R|-1}{\,|R|+n_{H}(h)}. (29) If the hotspot at each root selection is sampled from \bar{\pi}_{H} , Hoeffding’s inequality together with a union bound implies that, with probability at least 1-\delta , \|\hat{\pi}_{H}-\bar{\pi}_{H}\|_{\infty}\;\leq\;\sqrt{\frac{1}{2N}\,\log\!\frac{2|H|}{\delta}}. (30) Hence, for any run with total simulations N and realised gate counts n_{H}(h) , we obtain, with probability at least 1-\delta , \boxed{\|\hat{\pi}-\bar{\pi}\|_{\infty}\;\leq\;\sqrt{\frac{1}{2N}\,\log\!\frac{2|H|}{\delta}}\;+\;\max_{h}\frac{|R|-1}{\,|R|+n_{H}(h)}} (31) Appendix B Sample Regulation Solution Trajectory Figure 18 illustrates a representative regulation trajectory generated by RegulationZero. For clarity, we report only the number of flights rather than the complete set of flight identifiers, and omit the specific time window. Detailed information can be found in the supplementary log files. The top row denotes the identifier of the control volume (or reference location). A zero entry rate indicates that all inbound traffic is held within the window, leading to a bunching effect toward the end of the regulatory period. EDUFZ44 Flights: 53 Base: 20.0/h New: 17.0/h \downarrow EIDW16SL Flights: 54 Base: 22.0/h New: 15.0/h \downarrow ENS347S Flights: 19 Base: 5.6/h New: 1.0/h \downarrow LFMWW Flights: 44 Base: 4.0/h New: 1.0/h \downarrow LSAZM15 Flights: 22 Base: 14.0/h New: 0.0/h \downarrow ESOSF Flights: 5 Base: 3.0/h New: 0.0/h \downarrow LEMGANM Flights: 28 Base: 2.7/h New: 2.0/h \downarrow EI2D216C Flights: 26 Base: 5.0/h New: 1.0/h \downarrow EISNALL Flights: 53 Base: 18.7/h New: 16.0/h \downarrow LECMCJU Flights: 23 Base: 4.0/h New: 0.0/h \downarrow LECSCEN Flights: 27 Base: 2.0/h New: 0.0/h \downarrow EDMSI Flights: 10 Base: 2.0/h New: 0.0/h \downarrow EBBUNLW1 Flights: 25 Base: 15.0/h New: 15.0/h = EDG5PFEI Flights: 20 Base: 10.0/h New: 10.0/h = LFFARML1 Flights: 44 Base: 8.0/h New: 2.0/h \downarrow EDMSWA Flights: 4 Base: 4.0/h New: 0.0/h \downarrow LFFFPAE Flights: 76 Base: 26.7/h New: 24.0/h \downarrow EI1A128C Flights: 23 Base: 8.0/h New: 8.0/h = LECMZUMX Flights: 19 Base: 8.0/h New: 8.0/h = EGCLW Flights: 31 Base: 8.0/h New: 5.0/h \downarrow LECPDWO Flights: 37 Base: 4.0/h New: 4.0/h = LECBGO1 Flights: 16 Base: 4.0/h New: 2.0/h \downarrow ESMM8 Flights: 11 Base: 6.0/h New: 4.0/h \downarrow MASB5OH Flights: 41 Base: 8.0/h New: 5.0/h \downarrow LEBL23FE Flights: 53 Base: 28.0/h New: 28.0/h = ESOS179 Flights: 18 Base: 9.3/h New: 9.0/h \downarrow EDUWUR24 Flights: 8 Base: 5.3/h New: 3.0/h \downarrow LFRGA Flights: 10 Base: 8.0/h New: 4.0/h \downarrow EDWDBDS Flights: 15 Base: 28.0/h New: 27.0/h \downarrow EISNALL Flights: 81 Base: 16.0/h New: 13.0/h \downarrow EDUNTM44 Flights: 29 Base: 6.0/h New: 6.0/h = LFBP1 Flights: 43 Base: 48.0/h New: 46.0/h \downarrow EDUL234 Flights: 43 Base: 20.0/h New: 17.0/h \downarrow LFRRMSI Flights: 27 Base: 24.0/h New: 23.0/h \downarrow LECBBSU Flights: 6 Base: 12.0/h New: 6.0/h \downarrow LFMLOLE Flights: 35 Base: 4.0/h New: 2.0/h \downarrow ENO34 Flights: 19 Base: 7.0/h New: 6.0/h \downarrow EGCLW Flights: 37 Base: 12.0/h New: 7.0/h \downarrow LECMZGZ Flights: 21 Base: 4.0/h New: 2.0/h \downarrow MASD5HH Flights: 4 Base: 8.0/h New: 6.0/h \downarrow MASD3WL Flights: 28 Base: 8.0/h New: 7.0/h \downarrow LFBL2 Flights: 5 Base: 4.0/h New: 2.0/h \downarrow Figure 18 : Regulation Solution Trajectory for the 3h case. Each regulation targets a flow like in Figure 7 . Data Protection The processing pipeline is fully secured with all processing conducted on computer systems belonging to data centers located within the European Union (Romania and Czech Republic).