Active Localization of Close-range Adversarial Acoustic Sources for Underwater Data Center Surveillance Adnan Abdullah, David Blow, Sara Rampazzi, and Md Jahidul Islam {adnanabdullah@, david.blow@, srampazzi@, jahid@ece.}ufl.edu University of Florida, Gainesville, FL, USA Abstract Underwater data infrastructures offer natural cooling and enhanced physical security compared to terrestrial facilities, but are susceptible to acoustic injection attacks that can disrupt data integrity and availability. This work presents a comprehensive surveillance framework for localizing and tracking close-range adversarial acoustic sources targeting offshore infrastructures, particularly underwater data centers (UDCs). We propose a heterogeneous receiver configuration comprising a fixed hydrophone mounted on the facility and a mobile hydrophone deployed on a dedicated surveillance robot. While using enough arrays of static hydrophones covering large infrastructures is not feasible in practice, off-the-shelf approaches based on time difference of arrival (TDOA) and frequency difference of arrival (FDOA) filtering fail to generalize for this dynamic configuration. To address this, we formulate a Locus-Conditioned Maximum A-Posteriori (LC-MAP) scheme to generate acoustically informed and geometrically consistent priors, ensuring a physically plausible initial state for a joint TDOA-FDOA filtering. We integrate this into an unscented Kalman filtering (UKF) pipeline, which provides reliable convergence under nonlinearity and measurement noise. Extensive Monte Carlo analyses, Gazebo-based physics simulations, and field trials demonstrate that the proposed framework can reliably estimate the 3D position and velocity of an adversarial acoustic attack source in real time. It achieves sub-meter localization accuracy and over 90 90 % success rates, with convergence times nearly halved compared to baseline methods. Overall, this study establishes a geometry-aware, real-time approach for acoustic threat localization, advancing autonomous surveillance capabilities of underwater infrastructures. I INTRODUCTION The rapid growth of cloud computing, artificial intelligence (AI), and data-driven technologies has dramatically increased the global demand for data storage and processing capacity [ 1 , 2 ] . As traditional land-based data centers struggle with escalating power consumption [ 3 , 4 ] , cooling costs [ 5 ] , land usage logistics [ 6 ] , and environmental impact [ 7 ] , the industry is increasingly exploring offshore solutions, including floating [ 8 ] and underwater data centers (UDCs) [ 9 ] to address scalability constraints. Offshore data centers benefit from renewable energy, the ocean’s cooling capability, and physical isolation from tampering, while also being protected from air-based corrosion and consequently requiring less maintenance than traditional land-based facilities [ 10 , 11 , 12 , 13 ] . Despite these advantages, UDCs introduce new physical-layer vulnerabilities arising from their unique environment. The pressure vessel (pod), housing the servers, is filled with Nitrogen gas as it is over eight times less corrosive than air; however, this Nitrogen medium and the surrounding waterbody are denser than air and therefore conduct sound much faster and further – which makes UDCs more susceptible to acoustic attacks. Particularly, hard disk drives (HDDs) used for backend storage in these infrastructures are vulnerable to acoustic injections, which can lead to I/O errors, throughput degradation, and even permanent system crashes. Our prior works have shown that these acoustic injections can be effective even when launched remotely – over 6 meters from the pod – posing a serious risk to data center reliability and data availability [ 14 , 15 ] . Fig. 1 : An overview of our underwater acoustic source localization framework is shown for two representative configurations: (a) floating data center pods, and (b) submerged data center pods. We utilize a heterogeneous receiver pair comprising one static hydrophone mounted on the structure and one mobile hydrophone mounted on an autonomous mobile robot. The objective is to estimate and track the 3D position ( \mathbf{p_{s}} ) and velocity ( \mathbf{v_{s}} ) of an adversarial acoustic agent by integrating the proposed LC-MAP scheme that leverages acoustic geometry and locus consistency to enable robust localization of active targets. Detecting and localizing the origin of acoustic attacks is vital for data center surveillance and defense. Our recent work on internal detection [ 16 ] leveraged anomalous Position Error Signals (PES) extracted from the HDDs to identify the presence of acoustic interference. We observed that the relative performance degradation among drives offers a coarse directional cue – drives nearer to the attacker experience greater disruption. However, such inference provides only approximate directionality without revealing the absolute position or motion of the adversarial sound source. In this work, we advance beyond detection to achieve comprehensive 3D localization and tracking of an adversarial acoustic source. While optical or visual localization methods are effective for terrestrial surveillance systems, underwater vision systems are limited to a few meters under clear water and degrade rapidly in turbid or low-light conditions [ 17 ] . Imaging sonars can extend visibility to tens of meters, but their high cost, limited refresh rate, and low angular resolution make them unsuitable for agile threat response in dynamic conditions [ 18 , 19 ] . Consequently, we explore sound source localization (SSL), a method widely adopted in underwater sensor networks (UWSNs) [ 20 , 21 , 22 ] . However, adversarial acoustic source localization presents unique challenges: (i) large receiver arrays suffer from synchronization drift, multipath echoes, and potential lack of line-of-sight [ 23 ] ; (ii) the source may maneuver within tens of meters to evade detection, violating planar wavefronts or far-field assumptions [ 24 , 25 ] commonly used in beamforming models for distant ship or marine mammal localization [ 26 , 27 ] ; (iii) the attacker’s signal shape is unknown, narrow-band, and possibly frequency-hopping, making delay estimation more difficult and ambiguous; and (iv) the direction-of-arrival (DOA) or angle-of-arrival (AOA) methods yield only bearing information [ 28 , 29 ] , not generalizable for 3D localization and motion tracking of active mobile targets. To overcome these challenges, we propose a heterogeneous receiver architecture comprising one static hydrophone mounted on the UDC pod and one mobile hydrophone attached to an autonomous surface/underwater vehicle (ASV/AUV); see Fig. 1 . The system jointly exploits TDOA (time difference of arrival) and FDOA (frequency difference of arrival) measurements to estimate the 3D position and velocity of adversarial acoustic sources [ 30 ] . Our benchmark analyses show that off-the-shelf TDOA and FDOA filtering algorithms fail to generalize for this dynamic state estimation approach. To address this, we introduce a novel Locus-Conditioned Maximum A-Posteriori ( LC-MAP ) initializer, which leverages early acoustic measurements from the TDOA-FDOA loci and geometric consistency to provide a physically plausible configuration, enabling stable convergence of state estimation filters. We validate this concept by integrating this into an unscented Kalman filtering (UKF) pipeline [ 31 ] . Enabled by LC-MAP, UKF estimates can adapt to the highly nonlinear and noisy TDOA-FDOA observations and ensure robust 3D localization and tracking of active acoustic targets underwater. We evaluate the performance of our localization framework with four initialization schemes: Naive, Random-Sphere, TDOA-LS, and the proposed LC-MAP, across four representative source motion models: static (zero order), constant velocity (first order), constant acceleration (second order), and constant turn rate. Extensive Monte-Carlo numeric simulations and Gazebo-ROS physics simulations quantify each initializer’s convergence behavior and success rate. The analysis shows that LC-MAP achieves the highest success rate and the fastest convergence time, achieving sub-meter accuracy in less than half the iterations required by the naive initializer. Finally, we conduct field experimental trials for floating pod setups to demonstrate the real-world integration feasibility of the proposed system. In summary, the key contributions of this paper are as follows: 1. We develop a scalable acoustic threat localization framework for offshore infrastructures by utilizing a heterogeneous two-hydrophone receiver system (one static, one mobile). This configuration enables wide-area coverage and long-term autonomous surveillance without the logistical overhead of impractically many, synchronized hydrophone arrays around large underwater structures. 2. We propose a novel LC-MAP initialization scheme which fuses highly nonlinear TDOA-FDOA observations with geometric constraints to generate physically consistent priors for state estimation filters. Integrated into a custom UKF pipeline, LC-MAP maximizes geometric observability under noisy measurement conditions, achieving higher localization success rates and faster convergence than off-the-shelf filters with standard initialization schemes. 3. The proposed localization framework is validated through comprehensive Monte-Carlo numeric simulations and Gazebo-ROS physics simulations across diverse attack scenarios. While existing acoustic source localization approaches are mainly evaluated through simulations or offline data, we conduct real-world field experimental trials for the floating pod scenarios to demonstrate the robust performance and practical feasibility of our proposed framework. Overall, the proposed framework enables real-time localization of acoustic threats in UDCs through continuous monitoring and adaptive signal analysis. This capability allows rapid activation of defensive countermeasures to mitigate the impact of targeted acoustic injections, which can occur within 85 seconds of sustained acoustic excitation [ 14 , 15 ] , underscoring the importance of timely threat detection. II Related Work: Acoustic Source Localization Underwater TABLE I : Three categories of underwater acoustic localization scenarios are listed with state-of-the-art solution methods. Transmitter State Receiver State Selected References Mobile Static TOA: [ 32 , 33 ] , AOA: [ 34 , 28 , 29 ] , TDOA: [ 35 , 36 , 37 , 38 , 39 ] , RSS: [ 40 , 41 , 42 ] , TOA+AOA: [ 43 , 44 ] , TOA+FOA: [ 45 ] , TDOA+FDOA: [ 30 , 46 , 25 ] Static Mobile TDOA: [ 47 , 48 ] , AOA: [ 49 , 50 ] Mobile Mobile TDOA+FDOA: [ 51 , 52 ] , TDOA+AOA: [ 53 ] Although the specific problem of localizing adversarial acoustic sources has not been addressed in prior literature, similar physical configurations and solutions have been studied in the broader domain of underwater sound source localization (SSL) [ 54 , 55 ] . The attack scenarios considered in our work can be mapped to classical transmitter-receiver setups. For instance, a stationary attacker resembles a static transmitter-mobile receiver configuration, commonly seen in UWSNs [ 48 ] . In contrast, a mobile attacker maneuvering around the data center can be compared to marine mammals or AUVs, where the transmitter is dynamic and its trajectory is not known a priori [ 26 ] . These analogies enable the formulation of adversarial localization problems within the context of SSL research, while introducing new challenges such as close-range motion, unknown signal structure, and the crucial need for rapid operation. II-A Transmitter-Receiver Setups Underwater sound source localization systems are broadly categorized into two settings: a static transmitter and mobile receiver array, or a mobile transmitter and static receiver array [ 56 , 57 , 58 ] . Classical long-baseline systems belong to the former, where a fixed beacon on the seafloor emits known signals that are detected by a towed or autonomous hydrophone array [ 21 , 59 , 27 ] . In contrast, marine bio-acoustics represents the latter, where vocalizing animals act as mobile sources while fixed or drifting hydrophones serve as receivers [ 60 , 26 ] . These approaches are suitable for far-field scenarios (up to hundreds of kilometers) and rely on multiple receiver elements to resolve both the direction and range of the source. Recent works have explored optimal array geometries [ 22 , 61 ] for accurate localization of floating/submerged acoustic sources. For instance, Baron et al. [ 62 ] demonstrate that an array of 21 hydrophones configured in a tip-down conical pattern provides maximum spatial coverage within 350 Hz to 7 kHz frequency band for long-range source tracking. While effective, such designs are logistically complex, suffer from clock drift across receiver channels, and are often not suitable for deployment in constrained underwater environments. CLEAR [ 23 ] presents a minimal receiver architecture consisting of N+1 hydrophones to localize a source in N -dimensional space. Our proposed work further reduces the number of receivers by utilizing only two hydrophones in a heterogeneous configuration: one fixed hydrophone mounted on the infrastructure, and one mobile hydrophone carried by a surveillance robot. II-B Localization Approaches Various signal processing techniques have been proposed for underwater source localization that address environmental challenges such as unknown propagation speed [ 51 ] , receiver location uncertainty [ 63 , 64 ] , Doppler shifts [ 65 ] , etc. Classic approaches estimate Angle-of-Arrival (AOA) using arrays of (directional) hydrophones, but their accuracy depends on array aperture and the measurement does not reveal source range [ 34 , 28 , 29 ] . For complete 3D localization, the Time-of-Arrival (TOA), i.e. , absolute propagation delay between the source and receivers is measured, but this approach requires precise time synchronization [ 66 , 67 ] . Time-Difference-of-Arrival (TDOA) approaches rely only on relative delays across receivers, which reduces synchronization burden but still requires dense 3D arrays for accuracy [ 35 ] . Frequency-Difference-of-Arrival (FDOA) methods exploit Doppler shifts induced by relative motion between the source and receivers to infer range-rate differences [ 52 ] . Other approaches include Received Signal Strength (RSS) [ 41 , 68 ] and Differential RSS (DRSS) [ 69 ] , which utilize signal attenuation models to estimate range, but suffer from varying path loss in underwater acoustic channels and require frequent calibration. Given the unique environment challenges and receiver characteristics, researchers have fused multiple approaches for robust localization [ 43 , 45 ] . Joint TDOA-FDOA is a suitable choice for mobile source/receiver settings, where range-difference (from TDOA) and Doppler range-rate-difference (from FDOA) are combined into a single non-linear model. Filtering-based solutions such as the Extended Kalman Filter (EKF) [ 70 ] and Unscented Kalman Filter (UKF) [ 31 ] have been explored to handle such non-linear dynamic scenarios. However, their performance strongly depends on the initial state estimate; when the source’s position and velocity are completely unknown ( e.g. , adversarial emission scenarios) the filters converge slowly or fail to track. Therefore, we propose a novel initialization scheme that provides an acoustically-informed prior to the state estimator, enabling robust convergence and tracking compared to standard state estimation methods. III Problem Formulation and Methodology (a) Reference coordinate frames for our acoustic source localization framework: the two hydrophones H1 and H2, separated by a baseline distance d_{k} , coincide with the world frame \{W\} and the AUV’s inertial frame \{I\} , respectively. (b) Proposed computation pipeline: TDOA (FDOA) between two receivers are converted to range (range rate) differences and fed into UKF; LC-MAP utilizes early measurement bursts for a well-informed initial state estimation to the UKF. Fig. 2 : The localization scenario and the proposed computational pipeline are illustrated. TDOA and FDOA measurements are collected utilizing one anchor hydrophone on the data center pod and one mobile hydrophone on an AUV, which are jointly utilized in UKF to estimate the source state \mathbf{x} . The standard UKF diverges under uninformed initialization and nonlinear measurement dynamics, which is addressed by the proposed acoustically-informed LC-MAP module. A video demonstration can be seen here: https://youtu.be/6QOY7q3n34M . Acoustic injection refers to the process of emitting controlled sound waves, typically tonal or narrowband signals, from a speaker or long-range acoustic device (LRAD) toward a target computing device [ 71 ] . When the acoustic frequency aligns with the structure’s mechanical resonance frequencies, they induce strong vibrations that propagate to internal components such as HDDs, disrupting their read/write mechanisms, and even causing system failure [ 72 ] . Rapid response to such threats is critical, as HDD malfunction can occur within approximately 85 s of acoustic exposure, while resource reallocation alarms take up to 15 minutes to trigger, which is too late to prevent permanent damage [ 14 ] . Therefore, this work focuses on developing a robust and fast localization framework capable of identifying adversarial acoustic sources within this narrow time window. To this end, we formulate the adversarial acoustic source localization problem by combining TDOA and FDOA measurements from a two-receiver configuration (one static, one mobile), and integrating them within a UKF-based state estimator. The proposed LC-MAP scheme utilizes early acoustic observations and geometric consistency to yield informed priors and accelerate filter convergence. The overall system and computational pipeline are illustrated in Fig. 2 . Let \mathbf{p}_{s}\in\mathbb{R}^{3} and \mathbf{v}_{s}\in\mathbb{R}^{3} denote the unknown position and velocity of the acoustic source, respectively. The positions and velocities of the fixed and mobile receivers are denoted by (\mathbf{p}_{f},\mathbf{v}_{f}) and (\mathbf{p}_{m},\mathbf{v}_{m}) , where \mathbf{v}_{f}=0 . The speed of sound in water is c , and the source emits a narrowband tone of carrier frequency f_{0} , which is assumed to be close to the data center’s mechanical resonant frequency. Note that while \mathbf{p}_{s} , \mathbf{v}_{s} , \mathbf{p}_{m} , and \mathbf{v}_{m} vary over time, \mathbf{p}_{f} and \mathbf{v}_{f} remain constant since this hydrophone is mounted on the stationary pod. For notational simplicity, the time index k is omitted in the subsequent equations to represent instantaneous quantities at a given time step. Therefore, at time k , the range from the source to the mobile hydrophone is d_{m}=\lVert\mathbf{p}_{s}-\mathbf{p}_{m}\rVert , and to the fixed hydrophone is d_{f}=\lVert\mathbf{p}_{s}-\mathbf{p}_{f}\rVert . The TDOA between the two receivers is calculated as: TDOA={(d_{m}-d_{f})}/{c} . Besides, the Doppler frequency shift, i.e. , FDOA, is proportional to the relative radial velocity between the source and receivers, defined as: \mathrm{FDOA}=\frac{f_{0}}{c}\Big[(\mathbf{v}_{s}-\mathbf{v}_{m})\!\cdot\!\frac{\mathbf{p}_{s}-\mathbf{p}_{m}}{\lVert\mathbf{p}_{s}-\mathbf{p}_{m}\rVert}\\ -\,(\mathbf{v}_{s}-\mathbf{v}_{f})\!\cdot\!\frac{\mathbf{p}_{s}-\mathbf{p}_{f}}{\lVert\mathbf{p}_{s}-\mathbf{p}_{f}\rVert}\Big]. (1) By removing the scaling factors 1/c and f_{0}/c , these two equations are written as the range difference (RD) and range-rate difference (RRD): RD=d_{m}-d_{f},\\ RRD=(\mathbf{v}_{s}-\mathbf{v}_{m})\cdot\frac{\mathbf{p}_{s}-\mathbf{p}_{m}}{\lVert\mathbf{p}_{s}-\mathbf{p}_{m}\rVert}-\,(\mathbf{v}_{s}-\mathbf{v}_{f})\cdot\frac{\mathbf{p}_{s}-\mathbf{p}_{f}}{\lVert\mathbf{p}_{s}-\mathbf{p}_{f}\rVert}. (2) which are expressed in physical units- meters and meters per second, instead of seconds and Hertz, respectively. These geometric measurements are utilized in the subsequent state estimation process. III-A Time Difference of Arrival (TDOA) Estimation At each measurement step, the two hydrophones record time-synchronized acoustic signals of length N with a sampling rate of f_{s} . The TDOA is estimated using a windowed cross-correlation method. If s_{1}[n] and s_{2}[n] denote the recorded signals in the two channels, the normalized correlation over lag \ell is: R_{12}[\ell]=\frac{\sum_{n}s_{1}[n],s_{2}[n+\ell]}{\sqrt{\sum_{n}s_{1}^{2}[n]},\sqrt{\sum_{n}s_{2}^{2}[n]}}. (3) The peak lag \ell^{\star} corresponds to the estimated TDOA: \Delta\hat{t}={\ell^{\star}}/{f_{s}} ; where f_{s} Hz is the sampling frequency. However, the estimated TDOA from cross-correlation is inherently ambiguous beyond one period for narrowband continuous signals. When the true propagation delay exceeds \pm T_{0}/2 , where T_{0}=1/f_{0} , the measured delay “wraps” to the nearest equivalent phase, leading to discontinuities across successive frames. To maintain temporal continuity, we apply a TDOA unwrapping step that adds or subtracts integer multiples of T_{0} to the newly measured delay \Delta\hat{t}_{k} so that it remains closest to the previous unwrapped delay \Delta t_{k-1} as follows: \Delta t_{k}=\Delta\hat{t}_{k}+n_{k}T_{0},\\ n_{k}=\arg\min_{n\in\mathbb{Z}}\left|(\Delta\hat{t}_{k}+nT_{0})-\Delta t_{k-1}\right|. (4) III-B Frequency Difference of Arrival (FDOA) Estimation The FDOA is estimated by analyzing the phase evolution of the received narrowband signals across an observation window. Let S_{1}(f) and S_{2}(f) denote the discrete Fourier transforms of the synchronized two channel signals s_{1}[n] and s_{2}[n] . The cross-spectral density is defined as: G_{12}(f)=S_{1}(f)\,S_{2}^{*}(f)=|G_{12}(f)|\,e^{j\phi_{12}(f)}, (5) where \phi_{12}(f) is the cross-phase spectrum. For a narrowband tone, the relative Doppler shift is obtained from the linear slope of \phi_{12}(f) with respect to frequency. The slope is estimated by: \Delta f_{k}=\frac{1}{2\pi}\,\frac{d\phi_{12}(f)}{df}, (6) yielding the FDOA between the two receivers. Fig. 3 : Three examples from Monte Carlo simulation are shown; the source behaviors are: (a) static, (b) constant velocity, and (c) constant turn rate. The static-mobile hydrophone pair collects TDOA and FDOA measurements as the latter follows a 3D helical trajectory (orange). The source path and tracking results are shown in Green and Blue, respectively. Corresponding position errors over time and their root mean square metrics are reported in the bottom row. Fig. 4 : Four initialization methods are evaluated across four types of source motion using 100 Monte Carlo simulations. The top row shows the average time required for the filter to achieve a localization error below 1 m; the proposed LC-MAP initializer consistently converges faster than the others. The bottom row presents the success rate, defined as the proportion of trials in which the localization error falls below a given threshold within 120 s. While all methods succeed in the static case, LC-MAP demonstrates superior performance and reliability in dynamic scenarios. III-C Localization Algorithm: UKF-based State Estimation We adapt the Unscented Kalman Filter (UKF) [ 31 ] since it captures the nonlinear relationship between the source state and the range-based measurements without requiring explicit Jacobians, unlike the Extended Kalman Filter (EKF) [ 70 ] . At each time step, the filter predicts the source state based on a chosen motion model and updates it using the observed range difference and range-rate difference. For constant velocity motion model, the acoustic source state is defined as \mathbf{x}=\begin{bmatrix}\mathbf{p}_{s}&\mathbf{v}_{s}&b_{p}&b_{v}\end{bmatrix}^{T}\in\mathbb{R}^{8}, (7) where \mathbf{p}_{s}=[x_{s}~y_{s}~z_{s}] is the source position, \mathbf{v}_{s}=[v_{x}~v_{y}~v_{z}] is the velocity; b_{p} and b_{v} are position and velocity biases, respectively. At time k , the two-channel received signals produce the measurements: \mathbf{z}_{k}=\begin{bmatrix}\Delta d_{k}&\Delta\dot{d}_{k}\end{bmatrix}^{T}=\begin{bmatrix}c\,\Delta t_{k}&\frac{c}{f_{0}}\,\Delta f_{k}\end{bmatrix}^{T}, (8) where \Delta t_{k} is the unwrapped TDOA, obtained from cross-correlation and unwrapping (Eqn. 4 ), and \Delta f_{k} is the FDOA, obtained from phase-slope estimation (Eqn. 6 ). The corresponding nonlinear measurement model is represented by h(\mathbf{x}_{k})=\begin{bmatrix}RD&RRD\end{bmatrix}^{T}, (9) where RD and RRD are defined in Eqn. 2 . Depending on the true motion behavior of the acoustic source, three motion models are considered for state prediction: constant velocity (CV), constant acceleration (CA), and constant turn rate and velocity (CTRV). Each model propagates the source state according to: \mathbf{x}_{k+1}=f(\mathbf{x}_{k})+\mathbf{w}_{k},\qquad\mathbf{w}_{k}\sim\mathcal{N}(0,Q), (10) where f(.) represents the nonlinear motion function corresponding to the selected model and Q is the process noise covariance. The standard unscented transform formulation and sigma-point weighting follow the original implementation by Wan and Van der Merwe [ 31 ] . III-D Proposed Initialization Scheme: LC-MAP The proposed Locus-Conditioned Maximum A-Posteriori (LC-MAP) initialization scheme exploits the TDOA-FDOA loci and the early measurement bursts to generate a geometrically informed prior for the UKF. The key idea is that the first TDOA measurement defines a hyperbolic locus of possible source positions relative to the two receivers, while the corresponding FDOA introduces a velocity direction along this locus. The LC-MAP scheme samples candidate positions \mathbf{p} from the feasible TDOA locus and evaluates the likelihood of each candidate under the joint measurement model. For a candidate state (\mathbf{p},\mathbf{v}) , the measurement residual is computed as: J(\mathbf{p},\mathbf{v})=\big(\mathbf{z}-\hat{\mathbf{z}}(\mathbf{p},\mathbf{v})\big)^{\top}\mathbf{R}^{-1}\big(\mathbf{z}-\hat{\mathbf{z}}(\mathbf{p},\mathbf{v})\big), (11) where \mathbf{z} denotes the measured TDOA-FDOA vector and \hat{\mathbf{z}}(\mathbf{p},\mathbf{v}) is its predicted counterpart based on the candidate state and known receiver geometry; \mathbf{R} is the measurement noise covariance matrix. To avoid poorly conditioned configurations, a Fisher Information Matrix (FIM) term is incorporated to favor geometrically informative regions. The ultimate initialization is obtained by maximizing: (\mathbf{p}_{0},\mathbf{v}_{0})_{\text{LC-MAP}}=\arg\min_{\mathbf{p},\mathbf{v}}\Big[J(\mathbf{p},\mathbf{v})-\lambda\log\det\mathbf{F}(\mathbf{p},\mathbf{v})\Big], (12) where \mathbf{F}(\mathbf{p},\mathbf{v}) is the local FIM and \lambda controls the weight of the geometric conditioning term. Intuitively, this process prioritizes not just the most probable but also the well-conditioned initial points along the measured TDOA locus. As such, even if the initial guess is far from the true state, the high observability ( i.e. , larger FIM) allows the filter to adapt rapidly. To validate the benefits of LC-MAP initialization scheme, we compare its performance against three baselines: \bullet Naive: initializes the source at the geometric midpoint between the two hydrophones. \bullet Random sphere sampling ( aka Random): randomly samples candidate positions on a spherical surface consistent with the first TDOA measurement and selects the point yielding the minimum residual. \bullet TDOA-LS: iteratively refines the source position using a single TDOA measurement through least-squares updates until convergence. IV Experimental Evaluation IV-A Performance Metrics To assess the performance of different initialization schemes and the overall state estimation accuracy, we employ two metrics: (i) convergence time and (ii) success rate. The convergence time measures how quickly the UKF estimate approaches the true source location within a specified error threshold ( 1 m). It reflects both the quality of the initial guess and the filter’s ability to quickly adapt during early iterations. The success rate quantifies the proportion of Monte Carlo trials in which the filter converges to the true source trajectory within a specified distance error threshold (ranging from 0.1 m to 3 m) and within a fixed time window ( 120 s). This metric captures the overall robustness of each initialization scheme under different motion models. The analyses consider both static and mobile attacker scenarios. For the mobile case, we test constant-velocity and constant-acceleration motions to mimic energy-concentrated attacks, as well as circumnavigating paths to represent attackers probing for vulnerable regions. IV-B Monte Carlo Numeric Simulation The proposed framework is first validated through extensive numerical simulations. To emulate the field setup, the TDOA and FDOA measurements are recorded at a rate of 5 Hz and synthesized with additive white Gaussian noise. The static hydrophone is placed at a depth of 0.96 m below the origin, with the mobile hydrophone following a 3D helical trajectory around it; see Fig. 3 . Such a path enhances geometric observability compared to linear or planar motion patterns. Four source motion models are tested: static (zero order), constant velocity (first order), constant acceleration (second order), and constant turn rate. For each source motion and initializer type, 100 Monte Carlo trials are conducted, with the initial source position randomly sampled within \pm 20 m radius from the origin. Fig. 4 summarizes the average convergence time and success rate across all four initializers. The proposed LC-MAP scheme consistently achieves faster convergence and higher success rates than the baseline methods – reducing the average convergence time by nearly 50\% compared to the naive initializer. Note that the shorter convergence time observed for the second order motion results from a lower overall success rate, as failed runs are excluded from the convergence time statistics. IV-C Gazebo Physics Simulation We further demonstrate the strength of the proposed LC-MAP scheme in a ROS-Gazebo [ 73 ] physics-based simulation environment. The underwater world is adapted from the UUV Simulator [ 74 ] , which offers a 60 m deep open-water environment. The setup includes a custom data center pod placed on the seabed and digital replicas of two custom-built AUVs: NemeSys [ 75 ] and CavePI [ 76 ] . While Gazebo natively supports hydrodynamics and sensor physics, it lacks built-in components for acoustic propagation and hydrophone sensing. Therefore, we develop custom sensor plugins to simulate an omnidirectional acoustic source and two hydrophone receivers. The acoustic channel is modeled with an inverse-distance attenuation profile, and the received signal includes additive white Gaussian noise to emulate realistic channel conditions. The fixed hydrophone is mounted atop the pod, and the mobile hydrophone is attached beneath the NemeSys AUV to mimic the heterogeneous receiver configuration. The CavePI AUV carries the acoustic source, acting as the adversarial agent. Once the internal detection module is triggered, the NemeSys AUV initiates a surveillance maneuver, recording synchronized TDOA and FDOA data while navigating around the pod. The whole framework is wrapped in ROS to synchronize the AUV’s pose, two-channel hydrophone recordings, TDOA/FDOA calculation, and state update. Fig. 5 shows two representative runs conducted in the Gazebo simulator. The surveillance AUV executes a 3D path around the UDC pod, which ensures geometric observability in all three dimensions. The corresponding localization errors for both static and mobile source scenarios indicate that the proposed LC-MAP initializer rapidly locks onto the true source position within the first 5 - 10 seconds and maintains sub-meter tracking accuracy throughout the simulation. Fig. 5 : Representative results from the Gazebo-ROS physics simulator: (a) The UDC pod, the acoustic source, and the hydrophone receivers are rendered in a 60 m deep open water environment; and (b-c) Rviz snapshots for static and mobile source localization, respectively. Early and steady-state tracking results are illustrated from left to right; corresponding position error curves show sub-meter level root mean square error (RMSE) of position, indicating stable convergence over time. IV-D Field Experiments Following the simulation tests, we evaluate the proposed localization system in a shallow-water lake environment. As shown in Fig. 6 , the acoustic source and the mobile receiver (H2) are mounted beneath two Blue Robotics BlueBoat™ ASVs. The static hydrophone (H1) is suspended from the dock, with its surface projection defined as the global origin. Both ASVs continuously log GPS positions, velocities, and other telemetry data, which are synchronized with the acoustic signal to evaluate localization accuracy. Attack scenario . A total of 15 trials are performed to evaluate both static and dynamic adversarial attack scenarios. In the first set of trials, the acoustic source remains stationary while the mobile receiver executes simple geometric trajectories ( e.g. , circle, square, spiral, lawnmower) to capture diverse TDOA and FDOA observations. In subsequent tests, the source is also made mobile – following straight, arc-shaped, and U-shaped trajectories. Essentially, these maneuvers mimic a stealthy adversarial agent exploring vulnerable regions around the structure. Across all trials, the source-carrier ASV operates within a 15 m radius from the anchor ( i.e. , static hydrophone), while the hydrophone-carrier ASV maintains a separation of 1 m to 6 m from the anchor to avoid collision with others. The static and mobile hydrophones are suspended at depths of 0.91 m and 1.19 m, respectively, while the acoustic source operates at 0.6 m depth. Although there is no temporal depth variation, the depth offset among the three entities enhances the measurement observability along the z -axis. Hydrophone data collection . The experiments employ H2dM model hydrophones from Aquarian Hydrophones [ 77 ] . The outputs are terminated with a dual-mono 3.5 mm TRS connector, requiring an external plug-in power (PIP) for operation. Therefore, a custom pre-amp circuit is designed to accommodate the input impedance and bias current, as well as to amplify the audio output to a desired voltage range. Both channels of the circuit are identical, ensuring consistent amplification for the two hydrophones. Since the TDOA-FDOA method compares the two waveforms, a higher sampling resolution directly improves the measurement accuracy. Hence, we use a sampling rate of 200 kHz, and the two-channel acoustic data are synchronously acquired using a Digilent Analog Discovery (DAD3) board [ 78 ] . Acoustic noise filtering . We identify two dominant noise sources during the experiments: low-frequency water flow noise and high-frequency thruster interference generated by the ASVs. The latter induce an amplitude-modulation effect, resulting in waveform distortion during aggressive maneuvers, while surface bubbling elevate the low-frequency noise floor. To mitigate these effects, each hydrophone signal is processed using a fourth-order zero-phase Butterworth band-pass filter [ 79 ] centered at the source tone frequency, which is assumed to be close to the data drives’ resonant frequency. The zero-phase filtering preserves both temporal alignment and inter-channel delay integrity, ensuring unbiased TDOA estimation. The filtered signals exhibit signal-to-noise ratio (SNR) improvements of up to 40 dB, enhancing the subsequent TDOA-FDOA measurements. Fig. 6 : The open-water test site and representative trials are shown. Two ASVs carry the acoustic source and the mobile hydrophone (H2), while the other hydrophone (H1) is suspended from the dock. The hydrophone-equipped ASV executes various patterns to collect TDOA-FDOA measurements from the source, while the source may (a,b) remain stationary, or move along (c) straight, or (d) arc-shaped paths to emulate adversarial acoustic behavior. Localization performance . Since real-world acoustic measurements exhibit higher temporal fluctuation than predicted by geometric models (see Fig. 7 a), we empirically calibrate the process and measurement covariances from 15 independent sets of field data. With the empirically derived noise bounds, the localizer achieves stable tracking for different attack scenarios. The performance trends for static source case show that sub-meter accuracy is achieved within first 5 seconds, i.e. , 25 update cycles which is comparable to simulation results. For mobile sources, the localizer maintains errors below 2 m during smooth trajectory segments, while transient spikes occurring during sharp turns or high angular accelerations are rapidly corrected within a few iterations (see Fig. 7 c). Overall, these results confirm the LC-MAP-augmented pipeline’s ability to sustain convergence and recover from non-linear disturbances of real-world dynamic underwater acoustic environments. V Discussion: Challenges and practicalities V-A TDOA Measurement Challenge: Standing Wave While multi-channel synchronization is a well-known challenge in TDOA measurements, we identified an additional and often overlooked issue during our experiments in a 3 m \times 2 m \times 1.5 m water tank. Despite varying the baseline distance between two hydrophones, their phase difference remained nearly constant. This phenomenon is attributed to standing wave formation, since the tank’s dimension is comparable to signal wavelength ( \approx 1 m at 1.5 kHz). The attack signal swept frequencies between 500 Hz and 1. 5 kHz, which also coincides with the mechanical resonance band of the data center prototype. Within this frequency range, reflections from the tank walls, floor, and surface boundaries create a spatially uniform acoustic phase field and make the phase difference unobservable. We observed small phase variations only when the hydrophones were placed very close to reflective boundaries ( e.g. , tank floor). This occurs since boundary conditions slightly distort the standing pressure field, producing small, local phase gradients. The observations provide two key lessons for acoustic experiment design: (i) even mild wall reflections can destroy phase diversity, so apparent stable and clean signals may be physically meaningless for delay-critical experiments; (ii) instead, these tests should be performed in large open-water environments or in tanks equipped with acoustic absorbers and non-parallel walls to suppress reflections. V-B Field Trial Challenges Multiple field trials conducted in a shallow water lake revealed three practical challenges arising from the complex and dynamic real-world acoustic conditions. First, the mobile hydrophone was mounted beneath a BlueBoat ™ ASV, restricting its motion to a near-planar trajectory at a fixed depth. Consequently, spatial diversity along the vertical ( z ) axis was limited and occasionally led to poor geometric conditioning in the UKF’s state estimates [ 80 ] . To mitigate this issue, the vertical position uncertainty was tightly bounded, and the depth was initialized close to its true value. Second, the ASV’s onboard GPS drifted upto 2 m, introducing bias in both the ground-truth trajectory and the geometric modeling of TDOA/FDOA. We are integrating more accurate navigation aids, such as RTK-GPS for centimeter-level positioning accuracy. Additionally, for GPS-denied underwater deployment, the surveillance AUV will rely on visual-inertial odometry and SLAM to maintain its pose with respect to the data center pod. The third challenge was acoustic interference, primarily from surface waves, air bubbles, and thruster noise, which raised the background spectral floor and occasionally overlapped with the attack signal band. The interference was suppressed using a narrow band-pass filter centered on the source tone, however, the potential spectral overlap remains a limitation in low-SNR conditions. Overall, these trials highlighted that the real-world performance of TDOA/FDOA-based localization is bounded by three critical factors: (i) geometric diversity of receiver motion, (ii) positional accuracy of the receiver sensors, and (iii) robustness of acoustic sensing under environmental variability. Addressing these factors, particularly through accurate 3D receiver trajectories, will further enhance localization accuracy. Fig. 7 : Representative example from the lake trial is shown: (a) comparison between measured and modeled TDOA/FDOA, illustrating the filter’s measurement noise characteristics; (b) tracking performance showing the UKF’s ability to adapt during sharp turns; (c) achieved position error over time, demonstrating sub-meter localization accuracy in real-world conditions. V-C Improvements and Future Works Deep water deployment with submerged UDC pod . We are developing a new experimental platform to evaluate adversarial acoustic localization in fully submerged environments. A custom-built data center pod will be deployed at 20 - 30 m deep open water lake and grotto systems to mimic realistic subsea operating conditions. Consequently, two custom AUVs – CavePI [ 76 ] and NemeSys [ 75 ] – will replace the BlueBoat ™ ASVs previously used as the adversarial and surveillance agents. In the absence of GPS, the AUVs will use fiducial markers (mounted on the pod’s outer surface) and multi-sensor SLAM [ 81 ] for self-localization and navigation. The pod will house multiple server units and remain tether-connected to an on-land operations hub for remote command. During a controlled attack scenario, this testbed will support an end-to-end demonstration – from attack detection and localization to coordinated mitigation actions such as traffic isolation, data replication, threat neutralization, etc. Observability-driven active surveillance path planning . Utilizing two hydrophones for 3D source localization is inherently an under-constrained problem. We overcome this limitation by mobilizing one hydrophone, collecting diverse spatial observations over time. The trajectory of the surveillance AUV governs this spatial diversity and observability of the joint TDOA-FDOA system, and thus affects the convergence of the UKF. In our experiments, purely linear motions yield poor geometry and near-singular Jacobians, which occasionally lead to estimator divergence. The proposed LC-MAP addresses this issue by providing well-conditioned priors that ensure early filter stability. In the future, we will explore how to extend these principles into a real-time, adaptive path-planning framework. For instance, a path planner would be observability-aware if it favors paths that maximize measurement diversity and minimize estimation uncertainty. Such adaptive guidance is expected to further improve localization accuracy under weak-geometry conditions. VI Concluding Remarks This work focuses on localizing adversarial acoustic agents that threaten offshore data centers, where direct human supervision is not feasible. The proposed framework provides a real-time solution for detecting and localizing acoustic threats in UDCs through continuous monitoring and adaptive signal analysis. This capability enables rapid defensive intervention, effectively mitigating the risk of data corruption and hardware damage from targeted acoustic injections. By utilizing a minimal yet scalable heterogeneous receiver configuration, our system eliminates the logistical overhead of dense, synchronized arrays while retaining full 3D localization capability. Unlike conventional TDOA-FDOA measurement-driven localizers that rely on ad-hoc initialization and fail under uninformed, stealthy target conditions, our proposed LC-MAP scheme leverages acoustic geometry to maximize observability during the early measurement stage. Integrated into a UKF state estimator, LC-MAP enables fast, stable, and robust 3D localization of dynamic adversarial sources under noisy, non-linear measurement conditions. Extensive numerical analyses, Gazebo-ROS physics simulations, and open-water field trials confirm that the proposed LC-MAP-integrated pipeline achieves sub-meter localization accuracy and reduces convergence time by nearly half compared to off-the-shelf state estimation filters. Beyond data center security, the proposed framework establishes a scalable, generalizable foundation for acoustic surveillance of offshore assets, such as underwater sensor networks, communication relays, and distributed marine infrastructure.