Eigenvalue distribution from bootstrap estimates Samuel Kováčik, Katarína Magdolenová Abstract The bootstrap method has proven useful for a wide range of matrix models. Here, we show that the computed momenta can be used to reconstruct the underlying eigenvalue probability distribution, which in turn allows us to compute the free energy of the model—a necessary quantity for identifying the thermodynamically preferred solution. We verify the method on the well-studied quartic potential model and then apply it to a recently analysed asymmetric multi-trace model. We consider an extended class of possible solutions and demonstrate that free-energy analysis reliably selects the correct one, making it an essential tool for studying models with a complex solution structure. 1 Introduction Various physical systems can be expressed in terms of matrices of a certain type, for example, Hermitian matrices. When studying a model, for example, from a statistical or quantum mechanical point of view, integration over an ensemble is performed, which in the case of matrix models is an integration over the space of matrices. There are many approaches to performing this task; sometimes the model is approachable by (semi)analytical approaches, and sometimes one is required to perform numerical simulations, see Eynard:2015aea ; Jha:2021exo and references therein. Recently, the bootstrap method gained popularity Han:2020bkb . While it requires some numerical steps, it seems to be able, at least in some cases, to obtain high-precision results with modest computational resources. The basic idea is that one sets up a recurrent equation for the moments of the underlying distribution of the studied field and has an requirement that the solution has to satisfy; this requirement does not have to be interesting from a physical point of view. Then, one needs to scan the space of a small number of initial momenta, use the recurrent equation to compute more of them and then check if they satisfy the set requirement or not. In a series of papers Lin:2020mme ; Han:2020bkb ; Khalkhali:2020jzr ; Hessam:2021byc ; Kazakov:2021lel ; Aikawa:2021qbl ; Berenstein:2021loy ; Bhattacharya:2021btd ; Zheng:2023bjj ; Khalkhali:2023onm ; Kazakov:2024ool ; Lawrence:2024mnj ; Huang:2025sua ; Blacker_2022 ; Berenstein:2021dyf ; Berenstein:2022ygg ; Khan:2022uyz ; Nakayama:2022ahr ; Tchoumakov:2021mnh , this method has been proven to work well for various (not only) matrix quantum mechanical problems. Matrix models often appear in the context of quantum spaces, and this is the point of view of interest of the authors. In these models – and in many others – one is often interested in observables that depend only on the matrix eigenvalues and not on the entire matrices. In some cases, referred to as pure potential matrix models, the entire action is in the form that depends only on the eigenvalues. This, however, does not mean that the other matrix degrees of freedom are not important, as one still needs to perform integration over all of them. The integration over all degrees of freedom can be split into the integration over the eigenvalues and over the rest of variables, and the other integration can be performed, producing an effective term in the action that can be interpreted as a logarithmic repulsion between the eigenvalues. This new term leads to interesting properties that have been studied before RevModPhys.69.731 . For the content of this paper, we need just one fact: the behaviour of pure potential matrix models is entirely captured by a single function –– the eigenvalue distribution from which everything else can be computed. For some other models, such as fuzzy space models, this function does not capture every relevant aspect, but it is still valuable for analysing the model, for example, from the perspective of its phase space structure Szabo:2001kg ; Karabali:2006eg ; Balachandran:2005ew ; Ydri:2016dmy ; Tekel:2015uza ; Subjakova:2020prh . The focus of this paper is on the reconstruction of the eigenvalue distribution from its moments that are accessible by the bootstrapping algorithm. For this, we use the method developed by Tekel and Cohen tekel2012constructing . We show the usefulness of this construction by considering an asymmetric multitrace pure potential model that has been shown recently to have a coexistence of various solutions, that is, various local minima of free energy, of which only one is the thermodynamically preferred bukor2024simple . While the bootstrap algorithm finds many (all, in some limit) of these solutions, the reconstructed eigenvalue distribution allows us to compute the free energy and find the preferred one. From this point of view, constructing the eigenvalue distribution is a crucial step in the analysis of the models with a complex structure of free energy minima. This paper is organised as follows. First, we briefly summarise the bootstrap method and the eigenvalue density reconstruction from the moments. Then we show the method on a well-studied pure potential quartic model to show that the method recovers the known results. Finally, we apply the results to the recently studied findings of an asymmetric multitrace matrix model. 2 Matrix models and their moments We will consider a matrix ensemble Eynard:2015aea ; Tekel:2015uza ; Livan_2018 with the partition function of the form Z=\int e^{-N^{2}S(\phi)}d[\phi], (1) where [\phi] means the integration goes over all matrix elements, we will consider a set of Hermitian matrices of size N ; other choices also appear in the literature. The degrees of freedom of the model are therefore the elements of the matrix \phi . The observables one is interested in are often expressed as traces of some function of \phi and their mean value is taken to be \left\langle f\right\rangle=\frac{1}{Z}\int\,f(\phi)e^{-N^{2}S(\phi)}d[\phi]. (2) The simplest version of the action is a trace of some function of \phi , that is S(\phi)=\frac{1}{N}\sum_{n=0}^{N}g_{n}\text{Tr}(\phi^{n}), (3) however, later in the paper, we will also consider a multitrace model. In some situations, one can introduce terms with additional (usually) fixed matrices that add a physical context to the model, for example, a kinetic term of the form \sim\text{Tr}[L_{i},\phi]^{2} , where L_{i} are fixed matrices, in fuzzy space models. For some models, the action does depend only on the eigenvalues of \phi , denoted \lambda . However, one cannot just ignore the rest of the degrees of freedom, as integration initially went over all matrix elements, and the change of variables produces a Jacobian that can be added to the action as an additional term in the action: S_{J}(\lambda)=-\frac{2}{N^{2}}\sum\limits_{i-4 the values converge only to the symmetric solution ( m^{\prime}_{1}=0 ). For smaller r , however, progressively wider symmetric intervals (-m^{\prime}_{1},m^{\prime}_{1}) appear, indicating a richer structure of possible first moments than in the symmetric case. For r<-2\sqrt{1}5g , taking the endpoints of the interval, we obtain a single-cut asymmetric solution matching the analytic solution \begin{split}\rho_{3}(\lambda)&=\frac{1}{2\pi}\left(4D^{2}g+4Dg\lambda+2\delta g+r+4g\lambda^{2}\right)\sqrt{(D+\sqrt{\delta}-\lambda)(\lambda-D+\sqrt{\delta})}\\ &=\frac{1}{2\pi}\left(4D^{2}g+4Dg\lambda+2\delta g+r+4g\lambda^{2}\right)\sqrt{\delta-(\lambda-D)^{2}},\end{split} (31) for the inteval (D-\sqrt{\delta},D+\sqrt{\delta}) , where \delta=\frac{-r-\sqrt{-60g+r^{2}}}{15g},D=\pm\sqrt{\frac{-3r+2\sqrt{-60g+r^{2}}}{20g}}. (32) Figure 5 : Plot of the asymmetric one-cut solution obtained using the approximation method and moments generated via the bootstrap method (red dashed line), compared with the exact solution (black line). The green line represents the symmetric two-cut solution. The plots are shown for g=1 and, from left to right, for r=\{-2\sqrt{15},-9,-12,-15,-30,-50\} . For values between those, when reconstructing the probability distribution for values in between, we obtain an asymmetric two-cut solution. To choose the correct solution among the symmetric and asymmetric solutions, we compute the free energy ( 5 ). The results are shown in the Table 2 . Free energy values for g=1 r Symmetric two-cut Asymmetric two-cut Asymmetric one-cut -8 -3.233 -1.932 -1.895 -9 -4.353 -3.065 -2.885 -12 -8.218 -7.907 -6.657 -15 -13.361 -12.277 -11.598 -20 -24.289 -24.019 -22.382 Table 2: Free energy for selected values of r at g=1 for symmetric two-cut, asymmetric two-cut, and asymmetric one-cut solutions. For asymmetric two-cut solutions, multiple types of solutions exist; here we show a few randomly selected examples. From this, we can conclude that the correct preferred solution with the minimal free energy is that of the symmetric solutions, namely the one-cut and two-cut solutions, as shown in the phase diagram in Fig. 3 . To summarise the bootstrap study of the quartic potential model, the method is capable of reproducing the known results, and this effort is greatly enhanced by some choices of the initial probability distribution, and computation of free energy is needed to specify the correct solution. Let us now move to a far less-known model with an additional asymmetric potential. 5 Asymmetric multitrace model Let us now consider the following model investigated in bukor2024simple : S=\frac{1}{N}\text{Tr}\left(\frac{1}{2}r\,\phi^{2}+g\,\phi^{4}\right)+\frac{1}{N^{2}}t\,\text{Tr}(\phi)\text{Tr}(\phi^{3}). (33) The Dyson-Schwinger equations ( 7 ) gives the following relation between the moments \begin{split}&\sum_{q=0}^{k-1}\left\langle\text{Tr}(\phi^{q})\right\rangle\left\langle\text{Tr}(\phi^{k-1-q})\right\rangle-Nr\left\langle\text{Tr}(\phi^{k+1})\right\rangle-N4g\left\langle\text{Tr}(\phi^{k+3})\right\rangle\\ &-t\left(\left\langle\text{Tr}(\phi^{3})\right\rangle\left\langle\text{Tr}(\phi^{k})\right\rangle-3\left\langle\text{Tr}(\phi)\right\rangle\left\langle\text{Tr}(\phi^{k+2})\right\rangle\right)=0.\end{split} (34) As we are dealing with asymmetric model, we cannot set m^{\prime}_{1}=0 and we are left with two unspecified moments, m^{\prime}_{1},m^{\prime}_{2} M=\begin{pmatrix}1&m^{\prime}_{1}&m^{\prime}_{2}&\dots\\ m^{\prime}_{1}&m^{\prime}_{2}&-\dfrac{3tm^{\prime}_{1}m^{\prime}_{2}+rm^{\prime}_{1}}{4g+t}&\dots\\ m^{\prime}_{2}&-\dfrac{3tm^{\prime}_{1}m^{\prime}_{2}+rm^{\prime}_{1}}{4g+t}&\dfrac{1-rm^{\prime}_{2}-4tm^{\prime}_{1}m^{\prime}_{3}}{4g}&\dots\\ \vdots&\vdots&\vdots&\ddots\end{pmatrix}\succcurlyeq 0. (35) Now, we can proceed as before – scan over a two-dimensional lattice of parameters r,g and find which of the values are permitted by ( 35 ). As in the case of asymetric solutions of the quartic potential model, we find, for different values of g an interval of allowed solutions that does not shrink with additional moments included, see Fig. 6 . Figure 6 : Interval of suitable values for the first moment at r=-5.265 for various g and bootstrap matrix sizes M . As in the quartic case, a boundary emerges as the matrix size increases, toward which m^{\prime}_{1} converges. The iteration step used was 0.0005; for g<1.7 or g>1.9 , smaller steps would be needed for larger matrices to approach the limiting line. Again, this is caused by various allowed asymmetric and symmetric solutions, see Figure 7 . Figure 7 : Plotted approximate distributions \rho_{M}(\lambda) for g=1.733 , r=-5.265 . The purple and red lines represent the extreme values of the first moment, corresponding to one-cut asymmetric solutions on the right and left sides, respectively. We also observe the persistent presence of a symmetric two-cut solution (blue line), as well as several asymmetric two-cut solutions, one of which is shown as the green line. Therefore, to find the correct solution, we again compute the free energy and find which solution minimizes it. (a) r=-5.265 g=1.732525 (b) r=-5 g=1.5 Figure 8 : Comparison of the free energies: F_{\text{RAM}} (right asymmetric solution), F_{\text{LAM}} (left asymmetric solution), and F_{\text{SM}} (symmetric solution) for given values of r and g . Doing this for every chosen value of r,g , we construct the phase diagram of the model ( 33 ), and we find it to be in good agreement with the one obtained in the previous study, bukor2024simple . Note how easily the used method can be modified for a rather different form of matrix action. Figure 9 : Phase diagram for the cubic asymmetric multitrace matrix model. Symmetric solutions are represented by blue (two-cut) and green (one-cut) dots, while the red ones correspond to asymmetric one-cut solutions. The black line indicates the transition between symmetric solutions, given by r=-4\sqrt{g} . The following graph focuses on the region where, according to the referenced article, a triple point, where all three phases coexist (symmetric one-cut, two-cut, and asymmetric one-cut), is expected to exist. Figure 10 : Triple point for cubic asymmetric multitrace matrix model Looking at the triple point in Fig. 10 , we can see that in our approximate approach, it appears around the point g=1.75 , r=-5.29 . In the article bukor2024simple , the triple point was found at g=1.7325 , r=-5.265 , and through Monte Carlo simulations at g=1.7706 , r=-5.5432 . The value obtained here is theoretically closer because the method naturally works in the large- N limit. 6 Conclusion We have extended the bootstrap method for matrix models by computing the eigenvalue distribution from the moments already being used in the procedure. This allows us not only to track phase transitions but also to compute the free energy, which is necessary for selecting the correct, that is, the thermodynamically preferred, solution among the plethora found by the bootstrap method. In more detail, we have focused on the quartic single-trace potential with a single (scalar) matrix model. This is one of the simplest and most studied examples, and we verified the method on it. Usually, the asymmetric solutions are discarded by hand by considering odd moments to be vanishing. A similar insight about the structure of solutions might be less accessible in complex models, and a method not relying on it is warranted. We have shown that without these assumptions, one also recovers asymmetric solutions which are known to exist but also to have larger free energy than the symmetric ones. This simple model allowed us to test the sensitivity of the result on the choice of initial probability distribution, which is being updated and transformed into the correct distribution by the method of tekel2012constructing . We found Gaussian and constant distributions to work reasonably well. However, considering asymmetric distributions required us to choose the interval of initial distribution more delicately, which made finding the distribution more difficult. In practice, a good approximation was obtained using 10-15 moments. Note that computing the moments is simple, checking the positivity is less so. However, the total computation time relies heavily on the size of the scanned parameter space, which can be reduced by various assumptions, such as the discussed parity of the solution. Contrary to this, the usual numerical approach of Hamiltonian Monte Carlo allows for fewer such simplifications Jha:2021exo . We have utilised a particular form of the recurrent equation, the constraint and the set of orthogonal polynomials –– each of those could have been chosen differently and should be, if a it is proffered in current study. We were searching for a distribution on a real line, for a bounded interval one has the Hausdorff moment problem, for semibounded interval the Stieltjes moment problem or trigonometric moment problem for a unit circle simon1999classicalmomentproblemselfadjoint . We have then used our findings to study an asymmetric multi-trace potential model recently analysed in bukor2024simple . We were able to produce the phase diagram of the model by computing the free energy using the reconstructed eigenvalue distribution. To summarise, obtaining the eigenvalue distribution is a vital part of the bootstrap procedure, and we have shown how it is necessary to pick the correct solution among those found. We have also shown that constructing the distribution using a limited number of moments is of limited precision, and the result has to be understood as an approximation; for example, one can observe \rho<0 due to this inaccuracy. Careful handling, however, still allows it to be used for obtaining valuable insight into the model. Acknoweledgement This research was supported by VEGA 1/0025/23 grant Matrix models and quantum gravity . The authors would like to acknowledge the contribution of the COST Action CA23130, Bridging high and low energies in search of quantum gravity and COST Action CA21109, Cartan geometry, Lie, Integrable Systems, quantum group Theories for Applications ; parts of this work were disseminated during Cost Action CaLISTA General Meeting 2025 at Corfu Summer Institute. The authors would also like to thank Juraj Tekel for his valuable comments and suggestions. Appendix A Importance of the initial distribution In applying the approximation method ( 22 ), we found that the choice of the initial distribution P(x) strongly influences convergence and overall accuracy. Two aspects proved especially important: the normalization interval and the functional form of the initial distribution. The support of P(x) should approximately match that of the target distribution. If the interval is too narrow, the method diverges quickly and fails to approximate the desired density even for small values of M . If it is too wide, the approximation still converges but requires larger M , which can lead to numerical complications. Fig. 11 compare three initial functions – parabolic, constant, and Gaussian –normalized on intervals [-1,1] , [-2,2] , and [-3,3] . The target density P^{\prime}(x) corresponds to the one-cut solution ( 28 ) for r=1 and g=1 , with the support over the interval [-1,1] , shown as the solid black line. Figure 11 : Comparison of the approximation P^{\prime}_{15}(x) with the target density P^{\prime}(x) for different initial functions and normalization intervals. The quadratic error values in Tab. 3 quantify this effect: Interval Parabolic Constant Gaussian [-1,1] 0.00026 0.00001 0.00001 [-2,2] 0.00189 0.00257 0.00209 [-3,3] 0.00447 0.00508 0.00678 Table 3 : Quadratic error of the approximation for different intervals and initial distributions. These results clearly show that using the correct interval significantly improves convergence. Constant and Gaussian functions perform equally well in this respect, whereas the parabolic function is less stable. With an appropriate interval, the type of initial distribution also affects convergence. Fig. 12 illustrates how the initial distribution functions behave for M=1,3,5,15 . Figure 12 : Approximation P^{\prime}_{M}(x) compared with P^{\prime}(x) for various M and initial functions. Constant and Gaussian distributions converge rapidly toward P^{\prime}(x) even for small M , while the parabolic choice exhibits persistent oscillations and slower convergence. For Gaussian initial distributions, the parameter \sigma influences accuracy, see Fig. 13 . Values of \sigma\geq 1 yield significantly better results than smaller \sigma. Figure 13 : Influence of the Gaussian parameter \sigma on approximation accuracy. In our calculations, a constant initial distribution was typically sufficient: its convergence properties were comparable to the Gaussian case while avoiding the need to tune \sigma . Moreover, when the target distribution is asymmetric, choosing a constant initial distribution becomes even more effective, as it tends to converge faster than a Gaussian one. Nonetheless, these comparisons highlight that both interval and functional form must be chosen carefully to ensure stability and accuracy of the approximation method. Appendix B Numerical details Our calculations were performed using Python and Wolfram Mathematica. The code is structured into three main parts: 1. Bootstrap Method: This part generates the moments required for the approximation method. The bootstrap procedure is sensitive to several factors, notably the size of the bootstrap matrix. For symmetric solutions, the relevant matrix sizes are shown in Fig. 4 . Increasing the matrix size requires a corresponding reduction in the iterative step used for searching for the desired moments. For symmetric solutions, where only the second moment is needed, a smaller precision is sufficient. In contrast, when considering also asymmetric solutions, iteration over both m_{1} and m_{2} moments is required, demanding higher precision and smaller iterative steps. The matrix sizes needed for good convergence of m_{1} in asymmetric cases are shown in Fig. 6 . 2. Approximation Method: The second part computes the approximate probability distribution. Here, the choice of the initial distribution and its normalized interval plays a crucial role. For symmetric solutions and one-cut asymmetric cases, we chose symmetric intervals. Typical parameters were M=10-15 for symmetric solutions and M\approx 8 for asymmetric one-cut solutions. It is worth noting that when a larger interval is chosen, one might expect that M could be increased correspondingly. However, in practice, convergence sometimes fails. The issue arises due to the normalization in the relevant formula: for large M , the method involves dividing by small numbers, which can render the solution numerically unstable. 3. Free Energy Calculation: Once the probability density is obtained, its free energy is computed. This process is repeated for various values of r and g , separately for symmetric and asymmetric solutions. The preferred solutions, which are then visualized in a phase diagram, are determined by comparing free energies. To distinguish between one-cut and two-cut solutions, we applied simple threshold-based criteria. For symmetric solutions, a distribution was classified as two-cut if its value at x=0 remained below 0.05; otherwise, it was considered one-cut. For asymmetric solutions, a distribution was classified as two-cut if it exceeded 0.01 on both sides, otherwise it was considered one-cut.