Gas of thin tubes of massless scalar field as a possible model of unified dark fluid Alexander Lelyakov, Stepan Lelyakov Abstract ∗ Corresponding author. E-mail: lelyakov_a_p@mail.ru In this work, we investigated the influence of constants that characterize the motion of thin tubes of a massless scalar field (TToMSF) in a gas on the global properties of such a gas, in particular, on its ability to accelerated expansion. The peculiarity of the TToMSF gas is related to the fact that the parameter of its equation of state w depends on the degree of rarefaction of the gas and can take values in a very wide range of values -10.5\,Gpc ) inhomogeneities in the distribution of matter comes from observations of the motion of galaxy clusters [ 41 ] , the distribution of quasars and active galactic nuclei [ 42 ] , and the distribution of gamma-ray bursts [ 43 ] . The studies conducted have found that the putative superclusters are significantly larger in volume than allowed by SMoC. At the same time, the size of regions with reduced matter density, for example, KBC [ 44 ] - [ 47 ] , or Ho’oleilana [ 36 ] , are also in tension with SMoC; ( \bf T6 ) Growth of structures in the Universe. Observations made with the James Webb Space Telescope (JWST) show that structures in the Universe are growing faster than SMoC allows. For example, the density of galaxies found at redshifts z>14 is approximately 100 times higher than the SMoC predictions refs. [ 48 , 49 ] . Galaxies with masses in the range 10^{9}-10^{11}\,M\odot , discovered at redshifts z>10 [ 50 , 51 ] , the galaxy RUBIES-UDS-QG-z7 with a mass of about 10^{10}\,M\odot ( z=7.29 ) [ 52 ] , the double cluster El Gordo with a mass of about 2\times 10^{15}\,M\odot ( z=0.87 ) [ 53 , 54 ] , all these are examples confirming that real galaxies form and evolve much faster than predicted by SMoC refs. [ 52 , 12 ] ; ( \bf T7 ) The fine-tuning problem, or the problem of the cosmological constant \Lambda . The current understanding of the constant \Lambda as the vacuum energy density leads to a difference of approximately 120 orders of magnitude between the observed DE energy density and the corresponding prediction of quantum field theory (QFT) refs. [ 56 ] - [ 63 ] . In QFT, the vacuum energy density is associated with the possibility of generating particle-antiparticle pairs. This understanding of vacuum energy is the basis for explaining the observed Casimir and Lamb effects refs. [ 64 , 65 ] . Theoretically, using the one-loop correction in QFT, the value of the cosmological constant \Lambda can be made arbitrarily small. But, at the same time, the counterterms introduced with such a procedure are not protected from loop corrections of higher orders, which ultimately leads to an infinite tree of finely tuned counterterms, and in QFT there is no correct procedure that allows one to stop such branching. A more complete and detailed analysis of the observational data that come into tension with SMoC can be found in the reviews [ 12 , 55 ] . Attempts to alleviate the tensions in SMoC associated with dark energy have led to a large number of models with variable expansion dynamics of the Universe. Among such models we can name: models with parameterization [ 66 , 67 ] , viscous models [ 68 ] - [ 70 ] , the emergent dark energy model [ 71 , 72 ] , modified gravity models [ 73 ] - [ 79 ] , dynamic scalar field models [ 80 ] - [ 82 ] . For example, for models of the dynamic scalar field of dark energy, the parameter of the equation of state w=p/\rho , where p and \rho are, respectively, the pressure and energy density, is a variable quantity that depends on time. The concept of a thin tube of massless scalar field (TToMSF) is inextricably linked with such concepts in cosmology as the classical cosmic string and the null string. Classical cosmic strings are “one-dimensional” topological defects that, according to existing ideas, could have arisen during phase transitions in the early Universe refs. [ 83 ] - [ 87 ] . At the same time, null strings realize the limit in which the speed of a classical cosmic string reaches the speed of light, while the rest mass of the cosmic string tends to zero, and its energy remains a finite value refs. [ 88 , 89 ] . For this reason, the second name for null strings that appears in the literature is massless cosmic string. When describing the motion of a null string in an external gravitational field, an approximation is usually used in which the null string is replaced by a one-dimensional model. However, the one-dimensional model for the null string is not always physically justified since it corresponds to the study on a very large spatial scale, i.e., it corresponds to the scale of observation at which the gravitational influence of the null string is vanishingly small. In this regard, when studying the gravitational influence of an individual null string in a gas on its surroundings, it is physically justified to apply not a one-dimensional null string model, but the TToMSF model refs. [ 90 ] - [ 98 ] . The equation of state parameter w for the TToMSF gas is a variable value and depends on the degree of rarefaction of such a gas, i.e., it changes over time. Thus, in the case of a super-compressed gas w\rightarrow 1 , and for a highly rarefied w\rightarrow-1 refs. [ 99 , 100 ] . Based on this feature, TToMSF gas can be classified as a model of a dynamic scalar field of dark energy. The advantages of the TToMSF model over other models are: ( \bf A1 ) Time of formation. In accordance with the historically established concept of the formation of classical cosmic strings and null strings, which was noted above, the TToMSF gas could have formed during the period of baryogenesis ( t\approx 10^{-35}\,s ref. [ 83 ] ). That is, such a gas could have formed already at the earliest stages of the evolution of the Universe and, thus, could have influenced all processes and phenomena in the Universe. ( \bf A2 ) Possibility of implementing local equations of state. As noted above, the equation of state parameter w for the TToMSF gas depends on the degree of rarefaction of this gas and can take values in a very wide range -11 . The dimension of the constant \varrho is m^{4} (in the system of units c=1 , G=1 ). Applying ( 25 ), ( 26 ), for ( 21 ), we find an expression for the constant b_{0} , namely, b_{0}=\varrho\zeta\xi e^{3\varsigma}. (27) For ( 27 ), eqs. ( 19 ), ( 20 ), respectively, take the form K_{out}\rightarrow-\frac{3e^{-3\varsigma}}{\varrho\zeta\xi},\quad K_{within}\rightarrow-\frac{3e^{-3\varsigma}}{\varrho\zeta\xi\Phi^{3}}. (28) Note that under the condition 1/\epsilon^{\prime 2}>>\varsigma , eq. ( 18 ), neglecting higher-order smallnesses, can be written as \Phi\approx e^{-\varsigma}. (29) Taking into account ( 29 ), we can finally write K_{out}\rightarrow-\frac{3e^{-3\varsigma}}{\varrho\zeta\xi},\quad K_{within}\rightarrow-\frac{3}{\varrho\zeta\xi}. (30) As was said earlier, the constants \xi and \zeta determine the “thickness” (degree of compression) of the tube inside which the scalar field is concentrated. According to ( 14 ), ( 30 ) at the limit transition from a thin tube of a scalar field to a one-dimensional object (null string) K_{out}\rightarrow 0 and K_{within}\rightarrow 0 . At the same time (see eq. ( 30 )), the condition will always be met K_{out}/K_{within}\approx e^{-3\varsigma}\rightarrow 0. Let us note that the proposed fixation of the constants c_{0} and b_{1} is not the only possible one. It is possible to propose other expressions for the constants c_{0} , b_{1} , for which, in the limiting transition from a thin tube of a scalar field to a one-dimensional object (null string) K_{out}\rightarrow 0 and K_{within}\rightarrow 0 . Thus, the application of the test null string model will be physically justified if the values of the constants that characterize the test null string and the null string that is the source of the gravitational field (i.e., a thin tube of massless scalar field) are related by the following conditions (\zeta;\,\xi;\,\varsigma)_{test}>>(\zeta;\,\xi;\,\varsigma)_{source},\quad(\epsilon;\,\epsilon^{\prime})_{test}<<(\epsilon;\,\epsilon^{\prime})_{source}. (31) In other words, if the conditions ( 31 ) are met, the gravitational influence of the test null string on the null string, which is the source of the gravitational field, can be neglected. According to ( 14 ), ( 31 ) the “thickness” of the test null string must be less than the “thickness” of the null string that is the source of the gravitational field. Below, as an example, for the values of the constants \varrho=3,\quad\zeta=\varsigma=\xi=f_{0}=5, (32) the values of the constants c_{0} , b_{1} , b_{0} , which are defined by the eqs. ( 25 ), ( 26 ), ( 27 ), are c_{0}\approx 0.0967,\quad b_{1}\approx 2\,535\,432\,006,\quad b_{0}\approx 245\,176\,275. (33) 4 Motion of the test null string The equations that describe the motion of a test null string in an external gravitational field with metric tensor g_{ij} can be reduced to the form [ 103 ] : x^{\alpha}_{,\tau\tau}+\Gamma^{\alpha}_{pq}x^{p}_{,\tau}x^{q}_{,\tau}=0, (34) g_{\alpha\beta}x^{\alpha}_{,\tau}x^{\beta}_{,\tau}=0, (35) g_{\alpha\beta}x^{\alpha}_{,\tau}x^{\beta}_{,\sigma}=0, (36) where \Gamma^{\alpha}_{pq} are the Christoffel symbols for the tensor g_{ij} , \tau and \sigma are the parameters on the world surface of the test null string, x^{\alpha}_{,\tau}=\partial x^{\alpha}/\partial\tau , x^{\beta}_{,\sigma}=\partial x^{\beta}/\partial\sigma , indices \alpha , \beta , p , q , i , j take values 0,1,2,3, functions x^{\alpha}(\tau,\sigma) determine the trajectory of the null string (world surface). At the same time, eq. ( 35 ) is the condition for the null string to be massless (i.e., the condition that all points of the null string, at each instant of time, move at the speed of light), and eq. ( 36 ) ensures the orthogonality of the parameters \tau and \sigma on the world surface of the null string. If the initial value of the polar angle \theta for each point of the test closed null string does not change over time (i.e., does not depend on the time-like parameter \tau ), then for the quadratic form ( 2 ) the equations of motion of the test null string ( 34 ) - ( 36 ) can be reduced to the form: \theta=\theta(\sigma), (37) \eta_{,\tau\tau}+2\nu_{,\tau}\eta_{,\tau}=0, (38) s_{,\tau\tau}+2\nu_{,Q}Q_{,\tau}s_{,\tau}+2e^{2(\mu-\nu)}\mu_{,\eta}(z_{,\tau})^{2}=0, (39) z_{,\tau\tau}+e^{-2\mu}\left(e^{2\mu}\right)_{,\tau}z_{,\tau}+\frac{1}{2}e^{-2\mu}\left\{\left(e^{2\nu}\right)_{,Q}\eta_{,\tau}s_{,\tau}-\left(e^{2\mu}\right)_{,Q}(z_{,\tau})^{2}\right\}=0, (40) \left(e^{2\nu}\right)_{,\theta}\eta_{,\tau}s_{,\tau}-\left(e^{2\mu}\right)_{,\theta}(z_{,\tau})^{2}=0, (41) e^{2\nu}\eta_{,\tau}s_{,\tau}-e^{2\mu}(z_{,\tau})^{2}=0, (42) e^{2\nu}\left(\eta_{,\tau}s_{,\sigma}+\eta_{,\sigma}s_{,\tau}\right)-2e^{2\mu}z_{,\tau}z_{,\sigma}=0, (43) where s=t+r. (44) In the region where the quadratic form ( 2 ) is defined, the functions e^{2\mu}\neq 0 and (e^{2\mu})_{,\theta}\neq 0 . Then in this region, eqs. ( 41 ), ( 42 ), can be written as (z_{,\tau})^{2}=\frac{\left(e^{2\nu}\right)_{,\theta}\eta_{,\tau}s_{,\tau}}{\left(e^{2\mu}\right)_{,\theta}}, (45) (z_{,\tau})^{2}=e^{2(\nu-\mu)}\eta_{,\tau}s_{,\tau}. (46) It should be noted that for physically justified trajectories of the test null string, which are different from the trajectory of the source string ( 1 ), the conditions will be satisfied \eta_{,\tau}>0,\quad s_{,\tau}>0. (47) The condition \eta_{,\tau}<0 , or s_{,\tau}<0 , corresponds to the case of radial expansion or, respectively, radial compression of the test null string at a speed greater than the speed of light, which has no physical justification. At the same time, the condition \eta_{,\tau}=0 corresponds to the trajectories of the test null strings, which are similar to the trajectory of the source string ( 1 ). Equating the right-hand sides of eqs. ( 45 ), ( 46 ), and taking into account eq. ( 47 ), we find \left(\nu-\mu\right)_{,\theta}=0. (48) For functions ( 3 ), ( 5 ), eq. ( 48 ) takes the form \left(\ln{\left\{1-\sqrt{1-\left(c_{0}f_{,Q}\right)^{2}}\right\}}\right)_{,\theta}=0, (49) or, given ( 37 ), \left(\ln{\left\{1-\sqrt{1-\left(c_{0}f_{,Q}\right)^{2}}\right\}}\right)_{,\sigma}=0. (50) According to eq. ( 13 ), the function f_{,Q} depends on the variable Q , then the consequence of eq. ( 50 ) is Q=Q(\tau). (51) Since the form of the function Q is determined by the eq. ( 7 ), then to satisfy the eq. ( 51 ), taking into account ( 37 ), it is necessary to require z(\tau,\sigma)=Q(\tau)+q(\sigma). (52) For ( 47 ), taking into account ( 46 ), ( 51 ), ( 52 ), the first integrals of eqs. ( 38 ), ( 39 ), ( 40 ) can be written as \eta_{,\tau}=P_{1}(\sigma)e^{-2\nu}, (53) s_{,\tau}=a_{0}\frac{P_{3}(\sigma)}{P_{1}(\sigma)}\frac{\left|\lambda_{,\eta}\right|}{(\lambda(\eta))^{2}}\eta_{,\tau}, (54) \frac{\left|f_{,Q}\right|\left|Q_{,\tau}\right|}{\left(1+\sqrt{1-\left(c_{0}f_{,Q}\right)^{2}}\right)^{1/2}}=\frac{a_{0}c_{0}}{b_{0}}\frac{P_{2}(\sigma)}{P_{1}(\sigma)}\frac{\left|\lambda_{,\eta}\right|}{(\lambda(\eta))^{2}}\eta_{,\tau}. (55) where P_{1}(\sigma) , P_{2}(\sigma) , P_{3}(\sigma) , are “constants” of integration (initial impulses of the points of the test null string), and, taking into account ( 47 ), P_{1}(\sigma)>0,\quad P_{2}(\sigma)>0,\quad P_{3}(\sigma)>0. (56) According to ( 13 ), ( 51 ), the left side of the eq. ( 55 ) depends only on the variable \tau , in this case the right side of the eq. ( 55 ) can also depend only on the variable \tau , i.e., we can write \frac{P_{2}(\sigma)}{P_{1}(\sigma)}\frac{\left|\lambda_{,\eta}\right|}{(\lambda(\eta))^{2}}\eta_{,\tau}=F(\tau). (57) The consequence ( 57 ) is \frac{P_{2}(\sigma)}{P_{1}(\sigma)}=const.,\quad\eta=\eta(\tau). (58) Applying ( 3 ), ( 5 ), ( 42 ), ( 51 ), ( 52 ), ( 58 ), for ( 53 ) – ( 55 ), we find that the function s_{,\tau} depends only on the variable \tau , and also P_{1}=const.,\quad P_{2}=const.,\quad P_{3}=const. (59) Equation ( 42 ) (eq. ( 35 )), taking into account eqs. ( 3 ), ( 5 ), ( 52 ), ( 53 ), ( 54 ), ( 55 ), ( 59 ), relates the integration constants P_{1} , P_{2} , P_{3} , and can be written as P_{3}=\frac{\left(P_{2}\right)^{2}\left(c_{0}\right)^{2}}{b_{0}P_{1}}. (60) It was noted earlier that the eq. ( 35 ), and consequently the equality found ( 60 ), is a condition for the masslessness of the null string, i.e., a condition that on all sections of the trajectory the points of the null string move at the speed of light. According to ( 8 ), ( 13 ), outside the region where the scalar field is “concentrated” (i.e., outside the thin tube of the scalar field): f(Q)\rightarrow f_{0},\quad f_{,Q}\rightarrow 0,\quad\lambda(\eta)f(Q)\rightarrow 1-\alpha(\eta). (61) Then, taking into account ( 61 ), when studying the motion of the test null string, we can apply \left(1+\sqrt{1-\left(c_{0}f_{,Q}\right)^{2}}\right)^{1/2}=\varepsilon_{+}\approx\sqrt{2},\quad\left(1-\sqrt{1-\left(c_{0}f_{,Q}\right)^{2}}\right)^{1/2}\approx 0. (62) For eqs. ( 54 ), ( 55 ), the range of variation of the variables \eta and Q , depending on the sign of the derivatives of the functions \lambda(\eta) and f(Q) , is divided into four regions: Region I ( f_{,Q}>0 , \lambda_{,\eta}>0 ): \eta\in(-\infty,0),\quad Q\in(0,+\infty); (63) Region II ( f_{,Q}<0 , \lambda_{,\eta}>0 ): \eta\in(-\infty,0),\quad Q\in(-\infty,0); (64) Region III ( f_{,Q}>0 , \lambda_{,\eta}<0 ): \eta\in(0,+\infty),\quad Q\in(0,+\infty); (65) Region IV ( f_{,Q}<0 , \lambda_{,\eta}<0 ): \eta\in(0,+\infty),\quad Q\in(-\infty,0). (66) Integrating eqs. ( 53 ), ( 54 ), ( 55 ), for each of the regions \bf I — \bf IV , taking into account eqs. ( 58 ) – ( 62 ), we find \lambda(\eta)=\lambda_{0j}+\alpha_{j}P_{1}\tau, (67) s=s_{0j}(\sigma)+\beta_{j}\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}(\lambda(\eta))^{-1}, (68) f_{k}^{i}(Q)=U_{k}^{i}+\varrho_{k}^{i}\frac{P_{2}}{P_{1}}\frac{\varepsilon_{+}}{\lambda(\eta)}, (69) where \lambda_{0j} , s_{0j}(\sigma) , and U_{k}^{i} are “constants” of integration. In eqs. ( 67 ), ( 68 ), index j takes the value 0 , 1 , and for j=0 denotes the solution of eqs. ( 54 ), ( 55 ), in the region \bf I,II , and for j=1 the solution of eqs. ( 54 ), ( 55 ), in the region \bf III,IV . At the same time, the constants \alpha_{j} , \beta_{j} take the values: \alpha_{0}=1/a_{0},\quad\alpha_{1}=-1/a_{0}, (70) \beta_{0}=-a_{0},\quad\beta_{1}=a_{0}. (71) In eq. ( 69 ), index k takes the values I – IV , and denotes the region number, index i takes the value 0 , 1 , and denotes, for i=0 , the case Q_{,\tau}>0 , and for i=1 , the case Q_{,\tau}<0 . At the same time, the constants \varrho_{k}^{i} have the following values: \begin{array}[]{l}\varrho_{I}^{0}=\varrho_{II}^{1}=\varrho_{III}^{1}=\varrho_{IV}^{0}=-a_{0}c_{0}/b_{0},\\ \\ \varrho_{I}^{1}=\varrho_{II}^{0}=\varrho_{III}^{0}=\varrho_{IV}^{1}=a_{0}c_{0}/b_{0}.\end{array} (72) In eq. ( 67 ), the constants \lambda_{00} and \lambda_{01} determine the value of the parameter \tau on the boundary of the regions (i.e., when \eta=0 ). And so, fixing in ( 67 ) \lambda_{00}=\lambda_{01}=\frac{1}{f_{0}}=const, (73) we find that when \eta=0 the value of the parameter \tau=0 . Moreover: in regions \bf I,II ( \eta<0 ), \mbox{for}\quad\eta\in(-\infty,0),\quad\mbox{parameter values}\quad\tau\in\left(-\frac{a_{0}}{f_{0}P_{1}};0\right), (74) in regions \bf III,IV ( \eta>0 ), \mbox{for}\quad\eta\in(0,+\infty),\quad\mbox{parameter values}\quad\tau\in\left(0;\frac{a_{0}}{f_{0}P_{1}}\right). (75) Thus, for values of the parameter \tau belonging to the interval \tau\in\left(-\frac{a_{0}}{f_{0}P_{1}},+\frac{a_{0}}{f_{0}P_{1}}\right), (76) the variable \eta takes values in the interval \eta\in\left(-\infty,+\infty\right). (77) The explicit form of the constants U_{k}^{i} in eq. ( 69 ) is determined by the boundary conditions (i.e., the value of the functions f(Q) and \lambda(\eta) on the boundaries Q=0 and \eta=0 ). Thus, for example, for the case when the surfaces Q=0 and \eta=0 are impenetrable for the test null string, the constants U_{k}^{i} have the form U_{I}^{0}=U_{II}^{1}=U_{III}^{1}=U_{IV}^{0}=f_{0}\left(1+\frac{P_{2}}{P_{1}}\frac{a_{o}c_{0}}{b_{0}}\varepsilon_{+}\right), (78) U_{I}^{1}=U_{II}^{0}=U_{III}^{0}=U_{IV}^{1}=f_{0}\left(e^{-\varsigma}-\frac{P_{2}}{P_{1}}\frac{a_{o}c_{0}}{b_{0}}\varepsilon_{+}\right). (79) For ( 52 ), ( 53 ), ( 54 ), ( 59 ), ( 62 ), ( 68 ), eq. ( 43 ), in regions \bf I-IV takes the form \left(s_{0j}(\sigma)\right)_{,\sigma}=0, (80) from which it follows s_{0j}(\sigma)=Y_{j}, (81) where Y_{j} are constants. Applying ( 72 ), ( 73 ), ( 78 ), ( 79 ), for eqs. ( 69 ), we find the relation between the observed variable z and the parameter \tau in each of the regions \bf I-IV : for case z_{,\tau}>0 ( Q_{,\tau}>0 ) f^{0}_{I,IV}=f_{0}+F_{+},\quad f^{0}_{II,III}=f_{0}e^{-\varsigma}-F_{+}, (82) for case z_{,\tau}<0 ( Q_{,\tau}<0 ) f^{1}_{II,III}=f_{0}+F_{+},\quad f^{1}_{I,IV}=f_{0}e^{-\varsigma}-F_{+}, (83) where F_{+}=f_{0}\frac{a_{0}c_{0}}{b_{0}}\left(1-\frac{a_{0}}{a_{0}-f_{0}P_{1}|\tau|}\right)\frac{P_{2}}{P_{1}}\varepsilon_{+}, (84) the index on the left side of eqs. ( 82 ), ( 83 ) shows the number of the region in which this solution is implemented. You can notice that for the value \tau\rightarrow\pm\frac{a_{0}}{f_{0}P_{1}}, (85) the right-hand side of eqs. ( 82 ), ( 83 ), takes on unlimited values. Namely, \left.\left(1-\frac{a_{0}}{a_{0}-f_{0}P_{1}|\tau|}\right)\right|_{\,\tau\rightarrow\pm a_{0}/f_{0}P_{1}}\rightarrow-\infty. (86) On the other hand, according to ( 13 ), the left-hand side of eqs. ( 82 ), ( 83 ) is a bounded function that takes values in the interval (0,\,f_{0}) . In this case, eqs. ( 82 ), ( 83 ) provide additional restrictions on the interval of change of the parameter \tau . Namely, they allow to reduce the interval of possible values of the parameter \tau ( 76 ). Reducing the interval ( 76 ), according to ( 77 ), will lead to a restriction on the possible values of the variable \eta . Or in other words, it will lead to a limitation on the values of the variables t and r for the test null string, and as a consequence, to the formation of a region outside of which the behavior of the test null string is not defined. This region of space is called the “interaction zone”. The boundaries of the interaction zone for the test null string are determined by the maximum and minimum possible values of the right-hand side of the eqs. ( 82 ) and ( 83 ). Accordingly, in regions \bf I and \bf II the extreme left boundary of the interaction zone is realized, and in regions \bf III and \bf IV the extreme right boundary of the interaction zone is realized. These limits are achieved when |\tau|\rightarrow\frac{a_{0}b_{0}(1-e^{-\varsigma})}{f_{0}(b_{0}P_{1}(1-e^{-\varsigma})+a_{0}c_{0}P_{2}\varepsilon_{+})}. (87) From ( 87 ) it is clear that the “width” of the interaction zone depends on: \bullet Values of the initial impulses of the points of the test null string (constants P_{1} and P_{2} ); \bullet Values of the constants f_{0} , a_{0} , b_{0} , c_{0} , \varsigma , which characterize the distribution of the scalar field and are included in the metric functions (see eqs. ( 3 ), ( 4 ), ( 5 ), ( 8 ), ( 9 ), ( 13 )); Taking into account ( 81 ), the constants s_{0j} , in eq. ( 68 ), determine the surface (by the variable r ), on which, during movement, the test null string and the source string “meet” (are located on the same surface). Considering eqs. ( 67 ), ( 68 ), ( 73 ), ( 81 ), on the boundary \eta=0 , we find Y_{1}=Y_{0}-2a_{0}f_{0}\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}. (88) For ( 73 ), ( 88 ), the variables s and \eta , which are defined by eqs. ( 6 ), ( 44 ), ( 67 ), ( 68 ), take the form \eta=t-r=\lambda^{-1}\left(\frac{1}{f_{0}}-\frac{P_{1}}{a_{0}}|\tau|\right), (89) s=t+r=Y_{0}-\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}\frac{(a_{0})^{2}f_{0}}{(a_{0}-f_{0}P_{1}|\tau|)},\,\mbox{for $\eta<0$}, (90) s=t+r=Y_{0}-a_{0}f_{0}\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}\left(2-\frac{a_{0}}{a_{0}-f_{0}P_{1}|\tau|}\right),\,\mbox{for $\eta>0$}, (91) where the function \lambda^{-1}\left(\tau\right) is determined by the explicit form of the function \lambda(\eta) . 5 Graphs of motion of the test null string It should be noted that for analyzing the motion of a test null string, the scale of change in the \tau parameter in the above solution is uninformative (see ref. [ 92 ] ). Then, given the invariance of the action functional for the null string with respect to reparametrization on its world surface, it is convenient to move to the new parameter \tau^{\prime} , for example, using the equality \tau^{\prime}=\lambda^{-1}\left(\frac{1}{f_{0}}-\frac{P_{1}}{a_{0}}|\tau|\right), (92) or, using eqs. ( 8 ), ( 12 ), |\tau|=\frac{a_{0}}{f_{0}P_{1}}\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right). (93) Applying ( 92 ), ( 93 ) to the solution of ( 52 ), ( 82 ), ( 83 ), ( 89 ) – ( 91 ), we obtain t-r=\tau^{\prime}, (94) for \eta<0 t+r=Y_{0}-a_{0}f_{0}\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}\acute{T}, (95) for \eta>0 t+r=Y_{0}-a_{0}f_{0}\frac{\left(c_{0}\right)^{2}}{b_{0}}\left(\frac{P_{2}}{P_{1}}\right)^{2}\left(2-\acute{T}\right), (96) z=q(\sigma)+Q(\tau^{\prime}), (97) where \acute{T}=\left(1-\exp\left(-\left(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi)\right)^{-2}\right)\right)^{-1}, (98) and the function Q(\tau^{\prime}) is determined by one of the following equalities: for the case Q_{,\tau^{\prime}}>0 Q_{I,IV}(\tau^{\prime})=f^{-1}\left(f_{0}-\left(\frac{\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}{1-\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}\right)F\right), (99) Q_{II,III}(\tau^{\prime})=f^{-1}\left(f_{0}e^{-\varsigma}+\left(\frac{\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}{1-\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}\right)F\right), (100) for the case Q_{,\tau^{\prime}}<0 Q_{II,III}(\tau^{\prime})=f^{-1}\left(f_{0}-\left(\frac{\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}{1-\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}\right)F\right), (101) Q_{I,IV}(\tau^{\prime})=f^{-1}\left(f_{0}e^{-\varsigma}+\left(\frac{\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}{1-\exp\left(-(\xi(|\tau^{\prime}|+\epsilon^{\prime}/\xi))^{-2}\right)}\right)F\right). (102) In the eqs. ( 99 ) - ( 102 ), the form of the function f^{-1}(\tau^{\prime}) is determined by the function ( 13 ). The index on the left side of the eqs. ( 99 ) – ( 102 ) shows the number of the region in which this dependency is realized, F=\sqrt{2}f_{0}\frac{a_{0}c_{0}}{b_{0}}\frac{P_{2}}{P_{1}}. (103) For the values of the constants given in ( 32 ), ( 33 ), and the values of the constants given below Y_{0}=160,\,P_{1}=0.1,\,P_{2}=0.85,\,a_{0}=10^{6},\,\epsilon=\epsilon^{\prime}=10^{-7}, (104) the “left” and “right” boundaries of the interaction zone, for the test null string (see eqs. ( 87 ), ( 92 ), ( 93 ), ( 94 )), are achieved at \eta\rightarrow\pm 2.86,\quad\tau^{\prime}\rightarrow\pm 2.86. (105) In Figure 4 – Figure 7 for the values of the constants ( 32 ), ( 33 ), ( 104 )), graphs of the functions t(\tau^{\prime}) , r(\tau^{\prime}) , Q(\tau^{\prime}) are shown, which correspond to eqs. ( 94 ) – ( 102 ). Figure 4: In the figure, for the values of the constants ( 32 ), ( 33 ), ( 104 )), the graph of the function t(\tau^{\prime}) is shown. Figure 5: The figure, for the values of the constants ( 32 ), ( 33 ), ( 104 )), shows a graph of the change in the radius of a closed test null string r(\tau^{\prime}) as it moves in the gravitational field of the source string. Figure 6: The figure shows graphs of the dependence of the variable Q(\tau^{\prime}) , which are realized when the test null string moves in the regions I , III . Figure 7: The figure shows graphs of the function Q(\tau^{\prime}) , which are realized when the test null string moves in the regions II , IV . The graphs of the functions t(\tau^{\prime}) , r(\tau^{\prime}) , and Q(\tau^{\prime}) show that the gravitational field of a null string (i.e., TToMSF) can significantly influence the motion of neighboring null strings in a gas. In particular, the graph shown in Figure 5 demonstrates that in all sections of the trajectory, the test null string experiences a “strong” gravitational attraction of the source string, which is capable of changing the nature of the motion of the test null string to the opposite. As confirmation of the above, Table 1 shows the values of the variables t and r at points A,\ldots,E , which are indicated in Figure 5 , respectively, for the source string ( r_{source} ), and for the test null string ( r_{test} ). point t r_{source} r_{test} A 77.0 77.0 79.95 B 78.5 78.5 80.4 C 80.0 80.0 80.0 D 81.5 81.5 79.6 E 83.0 83.0 80.05 Table 1: The values of the variables t and r for the source string and the test null string at the points indicated in Figure 5 . For the situation shown in Figure 5 , the test null string enters the interaction zone of the source string at point A . At this moment in time, both the source string (see eq. ( 1 )) and the test null string increase their size (radius), while r_{test}>r_{source} (see Table 1). In the segment A – C (see Figure 5 ) the gravitational attraction of the source string causes the test null string, which initially expanded radially (segment A – B ), to change its direction of motion to the opposite at point B . That is, on the segment B – C the test null string already decreases its size (radius). At point C the test null string and the source string are on the same surface \eta=t-r=0 , i.e., r_{test}=r_{source} (see Table 1), but the directions of motion of these strings are different. Namely, the source string expands radially, and the test null string decreases its size (radius). The values given in Table 1 show that on the C – E segment r_{test}\left\langle T_{1}^{1}\right\rangle=\left\langle T_{2}^{2}\right\rangle=\left\langle T_{3}^{3}\right\rangle=-p. (108) For a massless scalar field \varphi , the components of the energy-momentum tensor are defined by the equalities T_{\alpha\beta}=\varphi_{,\alpha}\varphi_{,\beta}-\frac{1}{2}g_{\alpha\beta}L, (109) where L=g^{ab}\varphi_{,a}\varphi_{,b} , indices \alpha,\,\beta,\,a,\,b , take values 0,\,1,\,2,\,3 . Applying ( 2 ) to ( 109 ), we find T_{0}^{0}=\frac{(\varphi_{,\eta})^{2}}{e^{2\nu}}+\frac{(\varphi_{,Q})^{2}}{2}\left(\frac{(q_{,\theta})^{2}}{B}+e^{-2\mu}\right), (110) T_{i}^{i}=T_{1}^{1}=-\frac{(\varphi_{,\eta})^{2}}{e^{2\nu}}+\frac{(\varphi_{,Q})^{2}}{2}\left(\frac{(q_{,\theta})^{2}}{B}+e^{-2\mu}\right), (111) or using the explicit form of the distribution function of the scalar field ( 9 ), and metric functions ( 3 ) – ( 5 ) T_{0}^{0}=\frac{3}{2\chi(\alpha(\eta)+\lambda(\eta)f(Q))^{3}}\left\{\frac{1}{b_{0}}+\frac{1}{a_{0}}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}\right\}, (112) T_{i}^{i}=T_{1}^{1}=\frac{3}{2\chi(\alpha(\eta)+\lambda(\eta)f(Q))^{3}}\left\{\frac{1}{b_{0}}-\frac{1}{a_{0}}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}\right\}. (113) From the given eqs. ( 112 ), ( 113 ), it follows the connection -T_{i}^{i}=-T_{1}^{1}=A\cdot T_{0}^{0}, (114) where A=A(\eta,Q)=\left(\frac{(a_{0})^{-1}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}-(b_{0})^{-1}}{(a_{0})^{-1}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}+(b_{0})^{-1}}\right). (115) From the eq. ( 115 ) it is clear that the values taken by the function A(\eta,Q) depend on the values of the constants a_{0} and b_{0} , which are included in the metric functions of quadratic form ( 2 ). The value of the constant b_{0} is determined by the eq. ( 27 ), and the value of the constant a_{0} must be estimated. The constant a_{0} is one of the constants that define the boundaries of the interaction zone in eq. ( 87 ). By applying ( 73 ), ( 87 ) to eq. ( 67 ) one can determine the values of the variable \eta at the boundaries of the interaction zone \lambda(|\grave{\eta}|)=\frac{1}{f_{0}}-\frac{1}{f_{0}}\left(1+\sqrt{2}\frac{a_{0}c_{0}}{b_{0}\left(1-e^{-\varsigma}\right)}\frac{P_{2}}{P_{1}}\right)^{-1}, (116) where \grave{\eta} are the values of the variable \eta on the left and right boundaries of the interaction zone. We can say that for an ideal gas of thin tubes of a scalar field, the width of the interaction zone should not exceed the thickness of the scalar field tube (i.e., do not exceed core radius). According to ( 8 ), ( 12 ), outside the thin tube of the scalar field \lambda(\eta)\rightarrow 0 . Then the “thickness” of a thin tube of a scalar field can be conveniently defined by the equality \lambda(\eta)=\frac{\kappa}{f_{0}}, (117) where \kappa is a positive constant ( \kappa<1 ). Combining eqs. ( 116 ) and ( 117 ), we find the condition under which the “thickness” of the thin tube of the scalar field and the width of the interaction zone coincide \sqrt{2}\frac{a_{0}c_{0}}{b_{0}\left(1-e^{-\varsigma}\right)}\frac{P_{2}}{P_{1}}=\frac{\kappa}{1-\kappa}. (118) As already mentioned above, with increasing values of the constant P_{2} the “width” of the interaction zone decreases. Then, the minimum possible “width” of the interaction zone, in the c=1 system of units, will correspond to the value P_{2}=1 . In accordance with eqs. ( 67 ), ( 74 ), ( 75 ), the constant P_{1} is a scaling factor that relates the observed variables t , r (i.e., the variable \eta ) with the parameter \tau on the world surface of the test null string. In other words, the constant P_{1} is a scaling constant in eq. ( 67 ), so without loss of generality we can set P_{1}=1 . Taking into account the above, eq. ( 118 ), for an ideal gas of thin tubes, can be written in the form \sqrt{2}\frac{a_{0}c_{0}}{b_{0}\left(1-e^{-\varsigma}\right)}=\frac{\kappa}{1-\kappa}, (119) or a_{0}=\frac{\kappa b_{0}}{\sqrt{2}c_{0}}\cdot\frac{1-e^{-\varsigma}}{1-\kappa}. (120) Taking into account ( 120 ), the expression for the function A(\eta,Q) (see eq. ( 115 )), takes the form A=A(\eta,Q)=\left(\frac{\tilde{a}_{0}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}-1}{\tilde{a}_{0}|\lambda_{,\eta}|(f_{0}-f(Q))^{2}+1}\right), (121) where \tilde{a}_{0}=\sqrt{2}\frac{c_{0}}{\kappa}\cdot\frac{1-\kappa}{1-e^{-\varsigma}}. (122) Note that for \kappa=0.1 , and the values of the constants c_{0} , \varsigma , which are defined in ( 32 ), ( 33 ) \tilde{a}_{0}\approx 1.22. (123) Figure 8 and Figure 9 show graphs (two-dimensional surfaces) of the function A=A(\eta,Q) , which is defined by eq. ( 121 ). In Figure 8 , the graph of the function A=A(\eta,Q) is shown for \tilde{a}_{0}=1.22 , and the values of the constants defined in ( 32 ), ( 33 ), ( 104 ) (i.e., for the value of the constants \zeta=\xi=\varsigma=5 ). In Figure 9 , the graph of the function A=A(\eta,Q) is shown for \kappa=0.1 , \zeta=\xi=\varsigma=10 and, accordingly, c_{0}=0.071 , \tilde{a}_{0}=0.895 (see eqs. ( 25 ), ( 122 )). Figure 8: The figure shows the graph of the function A=A(\eta,Q) , for the values of the constants \zeta=\xi=\varsigma=5 . Figure 9: The figure shows the graph of the function A=A(\eta,Q) , for the values of the constants \zeta=\xi=\varsigma=10 . In the graphs shown, TToMSF corresponds to the region in the vicinity of the point \eta=Q=0 . From the graphs it is clear that everywhere outside the TToMSF region, the values of the function A are constant and negative ( A=-1 ). At the same time, “inside” the thin tube of the scalar field (i.e., in the vicinity of the point \eta=Q=0 ), the value of the function A is positive (A\rightarrow 1) . Comparing the graphs shown in Figure 8 and Figure 9 it is also evident that with increasing values of the constants \zeta,\,\xi,\,\varsigma , the region where A\rightarrow 1 decreases, which is associated with a decrease in the thickness of TToMSF. Using the graphs of the function A=A(\eta,Q) shown in Figure 8 and Figure 9 , for ( 114 ), we find the relation between the components of the energy-momentum tensor for a separate TToMSF in a gas. Namely, in the region that surrounds TToMSF ( \eta\neq 0,Q\neq 0 ), -T_{i}^{i}=-T_{1}^{1}=-T_{0}^{0}, (124) at the same time, inside TToMSF ( \eta=0,Q=0 ) -T_{i}^{i}=-T_{1}^{1}=T_{0}^{0}. (125) For a rarefied gas, the main contribution to the total energy-momentum tensor will come from regions of space that surround TToMSF. In addition, for a homogeneous and isotropic gas, all directions of motion are equally realizable. Then, taking into account the eq. ( 124 ), for a rarefied, homogeneous and isotropic gas TToMSF we can write -\left\langle T_{1}^{1}\right\rangle=-\left\langle T_{2}^{2}\right\rangle=-\left\langle T_{3}^{3}\right\rangle\rightarrow-\left\langle T_{0}^{0}\right\rangle, (126) or by applying eq. ( 108 ), p\rightarrow-\rho. (127) For the case of a compressed gas, it can be assumed that the main contribution to the total energy-momentum tensor will be given by the regions of space located inside TToMSF, which form the gas. Then, taking into account the eq. ( 125 ), for a supercompressed homogeneous and isotropic gas TToMSF we can write -\left\langle T_{1}^{1}\right\rangle=-\left\langle T_{2}^{2}\right\rangle=-\left\langle T_{3}^{3}\right\rangle\rightarrow\left\langle T_{0}^{0}\right\rangle, (128) or by applying eq. ( 108 ), p\rightarrow\rho. (129) At the same time, as has already been said above, a decrease in the value of the initial momentum P_{2} will lead to the fact that the “width” of the interaction zone for TToMSF in the gas will increase, which will lead to the appearance in the gas of effects associated with the peculiarity of the gravitational interaction between TToMSF that form the gas (see refs. [ 92 , 100 ] ). 7