Tilted dipolar bosons in the quasi-2D regime: from liquid stripes to droplets. J. Sánchez-Baena Abstract We characterize a system of tilted dipoles in a quasi two-dimensional (flattened) geometry and in the thermodynamic limit. We consider a finite trapping in the z z -axis achievable in current experiments. We compute the phase diagram of the system at its equilibrium density for high tilting angles, where it becomes self-bound, and a striped liquid state emerges. To characterize the system, we perform a variational calculation, which is benchmarked with the solution of the extended Gross-Pitaevskii equation. We connect the phenomenology in the thermodynamic limit to the physics of the finite-size system, provide parameters for the realization of potentially supersolid striped states and study the critical number for dipolar droplet formation. Our results are helpful to guide potential experiments in the study of dipolar atoms in quasi two-dimensional geometries in the dipole-dominated regime. Preprint: APS/123-QED I Introduction Ultracold quantum gases with dipolar interactions have risen to prominence in the last decade as a platform to study a plethora of exotic phenomena in a controlled environment. The interplay between the anisotropy and long-range behaviour of the dipole-dipole interaction (DDI) is responsible for the emergence of dipolar droplets [ 1 , 2 , 3 , 4 , 5 ] , which constitute an ultra-dilute liquid state, supersolids [ 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 ] , which combine two apparently mutually exclusive properties like global phase coherence and spatial periodicity, or anomalous thermal behaviour [ 14 , 15 , 16 , 17 ] , in the form of the promotion of supersolidity by increasing the temperature. Recently, many efforts are being directed towards the realization of ultracold atom experiments in a quasi two-dimensional geometry, in a regime where physical phenomena exclusive to the two-dimensional realm can be accessed. This includes the measurement of the Berezinskii-Kosterlitz-Thouless (BKT) transition for a system of 87 Rb atoms [ 18 ] , the realization of a Bose glass in a quasicrystalline optical lattice [ 19 ] , or the direct probing of a 1D-2D crossover for caesium atoms [ 20 ] , to name a few. In the case of dipolar systems, quasi two-dimensional systems have the added interest of studying the interplay between the unique properties of the DDI and a dimensional constrain. Due to the anisotropy of the DDI, limiting the motion of particles in one direction introduces a new variable with respect to the three-dimensional case: the polarization direction of the dipoles. Moreover, quantum fluctuations, which play a crucial role in dipolar systems by arresting the mean-field collapse [ 21 , 22 , 23 ] depend significantly on dimensionality [ 24 , 25 ] . Because of this, experimental activity targeting these systems has emerged recently. In particular, a bilayer of Dy atoms with a layer width on the sub- 50 nm scale has been realized [ 26 ] , and the BKT transition has been experimentally accessed for a dipolar system, where the wave function of atoms along the tightly trapped direction approximately corresponds that of the harmonic oscillator ground state [ 27 ] . In light of this experimental activity, it is necessary to provide theoretical calculations pointing at the relevant parameters for the observation of novel physical phenomena exclusive to the quasi two-dimensional regime. Several theoretical works have been produced along the years with the goal of characterizing dipolar systems in flattened geometries under different specific conditions. These include the study of the ground state, collapse instability and excitations of the gas phase at the mean field level [ 28 , 29 , 30 , 31 ] , including finite temperature [ 32 ] , and the characterization of the stripe phase for bosons [ 33 , 30 , 34 ] , fermions [ 35 , 36 ] and mixtures [ 37 ] , where a spin-stripe phase emerges. The system has also been studied in the 3D limit [ 38 , 39 , 40 , 41 ] and in the presence of a two-dimensional lattice, both at zero and finite temperature [ 42 , 43 ] . In particular, the results in the 3D limit show the importance to modify the tilting angle of the dipoles to reduce the necessary density for the experimental realization of the stripe phase, which is excessively large in the case of dipoles perpendicular to the plane of motion, and thus induces important three-body losses [ 39 ] . Through this approach, striped arrangements of tilted dipoles have been observed in experiments [ 44 ] , with the number of stripes being controllable with the trap aspect ratio. In the strict two-dimensional case, quantum Monte Carlo methods have been employed to study the phases of the system for the case of a single layer [ 45 , 46 , 47 , 48 , 49 ] , a bilayer [ 50 ] and a multilayer [ 51 ] configuration. Figure 1: Schematic representation of the system of dipoles in a flattened geometry. Left: isodensity surfaces in the homogeneous liquid phase. The different colors correspond to surfaces where n=0.5n_{\rm peak} (red), n=0.8n_{\rm peak} (light blue) and n=n_{\rm peak} (dark blue), with n the 3D density and n_{\rm peak} the peak density. Center: isodensity surface ( n=0.5n_{\rm peak} (dark blue)) of the system in the liquid stripe phase. Right: graphical representation of a polarized dipole (thick black arrow) with tilting angle \alpha . Recently, a theoretical work brought the attention into the liquid properties of the system of tilted dipoles in the fully two-dimensional case [ 52 ] , where the emergence of an exotic, striped liquid phase in the thermodynamic limit is shown. Nevertheless, the strict two-dimensional limit, which is achieved when l\ll a , with l the oscillator length in the z-axis and a the scattering length, lies away from the state of the art experiments, which typically fulfill l>a . This has important consequences on relating the phenomenology of the system with the s -wave scattering length, which is of crucial importance in experiments, while also impacting greatly the critical number for the formation of droplets, as we shall illustrate below. In this work, we perform a variational calculation to obtain the phase diagram of an infinite system of tilted dipoles in a flattened geometry at the equilibrium density. In specific cases, we benchmark our variational results with the solution of the extended Gross-Pitaevskii equation (eGPE), which we also employ to perform calculations of a finite size system under a box trap. This paper is organized as follows. In Sec. II , we present the variational theory and the eGPE. In Sec. III , we present our results for both the thermodynamic limit (Sec. III.1 ) and the finite size system (Sec. III.2 ) while in Sec. IV we summarize the main conclusions of our work. II Theory We study a system governed by the energy functional \displaystyle E[\psi]=\int d{\bf r}\psi^{*}({\bf r})\left[-\frac{\hbar^{2}\nabla^{2}}{2m}+U({\bf r})\right]\psi({\bf r}) \displaystyle+\frac{1}{2}\int\int d{\bf r}d{\bf r^{\prime}}\absolutevalue{\psi({\bf r'})}^{2}V({\bf r}-{\bf r^{\prime}})\absolutevalue{\psi({\bf r'})}^{2} \displaystyle+\int d{\bf r}\epsilon_{\rm BMF}\left(\absolutevalue{\psi({\bf r})}^{2}\right) (1) where U({\bf r})=\frac{1}{2}m\omega^{2}z^{2} for the infinite system and U({\bf r})=\frac{1}{2}m\omega^{2}z^{2}+U_{\rm box}(x,y) for the finite one with U_{\rm box}(x,y) a box trap. V({\bf r}-{\bf r^{\prime}}) is the contact plus dipole-dipole interaction, i.e. \displaystyle V({\bf r}-{\bf r^{\prime}})=\frac{4\pi\hbar^{2}a}{m}\delta\left({\bf r}-{\bf r^{\prime}}\right)+\frac{C_{\rm dd}}{4\pi}\frac{\left(1-3\cos^{2}\theta_{\alpha}\right)}{\absolutevalue{{\bf r} - {\bf r'}}^{3}}\ , (2) with a the s-wave scattering length and \theta_{\alpha} the angle between the vector {\bf r}-{\bf r^{\prime}} and the polarization axis of the dipoles. In the calculations, we change this direction within the x - z plane, and define \alpha as the angle between the polarization direction and the z -axis (see Fig. 1 ). Here C_{\rm dd}=\mu_{0}\mu^{2} for magnetic dipoles. We restrict ourselves to the regime where the collisions between particles can be treated as a three-dimensional process, meaning that l>a with l=\sqrt{\frac{\hbar}{m\omega}} , which is necessary for the model interaction of Eq. 2 to be valid. We define characteristic energy and length scales given by r_{0}=12\pi a_{\rm dd} and E_{0}=\hbar^{2}/(mr_{0}^{2}) and present our results in these units. Here, a_{\rm dd}=mC_{\rm dd}/(12\pi\hbar^{2}) is the dipole length. The quantity \epsilon_{\rm BMF}\left(n=\absolutevalue{\psi({\bf r})}^{2}\right) is an energy functional accounting for beyond mean-field (BMF) effects. In order to compute it, we follow Ref. [ 25 ] , where the BMF energy density is obtained for an homogeneous system with periodic boundary conditions on the z -axis, thus accounting approximately for the discretized excitations due to finite trapping effects. Remarkably, the scaling law of \epsilon_{\rm BMF} with the density depends on the density regime. This is because at lower densities only the lowest excitations along the z -axis are populated (meaning that the system is in the quasi two-dimensional limit) while higher densities yield the 3D scaling. In practice, if we denote by n_{\rm lim} the limiting value of the density where the scaling changes, the BMF energy density can be fitted to [ 25 ] \displaystyle\epsilon^{\rm low}_{\rm BMF}(n) \displaystyle=C_{1}n^{2}+C_{2}n^{3}+C_{3}n^{5/2} \displaystyle nn_{\rm lim} (4) The term C_{3}n^{5/2} is included in Eq. 3 with respect to the result of Ref. [ 25 ] to improve the accuracy of the fit, while Eq. 4 shows the well-known density scaling in the 3D limit [ 21 , 22 ] . In the calculation for \epsilon_{\rm BMF} , we set the value of the length of the z -axis to L_{z}=4l , with l the harmonic oscillator length of the trapping, and find n_{\rm lim} numerically (see the Appendix A ). This density is an important parameter, as it helps to determine whether the system is effectively two or three-dimensional. When evaluating Eq. 1 , we have to choose one of the two density functionals from Eqs. 3 and 4 . The choice is determined by the peak density of the converged ground state. We employ Eq. 3 if n_{\rm peak}\lesssim n_{\rm lim} and Eq. 4 if n_{\rm peak}\gg n_{\rm lim} , with n_{\rm peak} the peak (or maximum) 3D density. It can be seen numerically that the energy functional of Eq. 4 lays quantitatively very close (less than a few \% away) to the standard LHY energy density correction in three dimensions given in Refs. [ 21 , 22 ] . At high enough values of the tilting and for a tight confinement along the z -axis, the system is expected to host either an unmodulated state, or a striped state as its ground state [ 52 , 34 ] . Even if a triangular state or a honeycomb state can appear as the ground state of a system of dipoles in a flattened geometry for a given range of densities and scattering lengths [ 38 , 39 , 41 ] , we argue in the Appendix B ) that this is not the case for the parameters considered in our work. Thus, in order to find the lowest energy state, we perform a variational minimization of Eq. 1 for two different ansatz. These are the senoidal ansatz \displaystyle\psi_{\rm S}({\bf r})=\sqrt{\frac{n_{\rm 2D}}{\sqrt{\pi}\sigma_{z}}}\sqrt{1+A\cos(k y)}e^{-\frac{1}{2}\left(\frac{z}{\sigma_{z}}\right)^{2}}\ , (5) with A , k and \sigma_{z} variational parameters, and the gaussian ansatz \displaystyle\psi_{\rm G}({\bf r}) \displaystyle=\sum_{j=-\infty}^{\infty}\int dy^{\prime}\sqrt{\frac{n_{\rm 2D}L_{y}}{\pi\sigma_{z}\sigma_{y}}}e^{-\frac{1}{2}\left[\left(\frac{y^{\prime}}{\sigma_{y}}\right)^{2}+\left(\frac{z}{\sigma_{z}}\right)^{2}\right]} \displaystyle\times\delta(y+jL_{y}-y^{\prime})\ , (6) where the variational parameters are L_{y} , \sigma_{y} and \sigma_{z} . In both expressions, L_{y} is the length of the unit cell in the y -axis ( L_{y}=2\pi/k for the senoidal ansatz), n_{\rm 2D}=\frac{N}{L_{x}L_{y}} is the 2D density and the normalization ensures that N=\int_{-L_{x}/2}^{L_{x}/2}\int_{-L_{y}/2}^{L_{y}/2}\int_{-\infty}^{\infty}d{\bf r}\absolutevalue{\psi_{\rm S, G}({\bf r})}^{2} . The senoidal ansatz converges to an unmodulated state in the limit A\rightarrow 0 , meaning that with these wave functions we can account for an unmodulated state, a phase coherent, striped state and a highly incoherent striped state. We insert Eqs. 5 and 6 into Eq. 1 to obtain expressions for the energy of the system. In a general way, we split the contributions of the energy into \displaystyle E_{\rm S,G} \displaystyle=E_{1}+E_{\rm V}+E_{\rm BMF}\ , (7) \displaystyle E_{1} \displaystyle=\int d{\bf r}\psi^{*}({\bf r})\left[-\frac{\hbar^{2}\nabla^{2}}{2m}+U({\bf r})\right]\psi_{\rm S,G}({\bf r})\ , (8) \displaystyle E_{\rm V} \displaystyle=\frac{1}{2}\int\int d{\bf r}d{\bf r^{\prime}}\absolutevalue{\psi_{\rm S, G}({\bf r'})}^{2}V({\bf r}-{\bf r^{\prime}})\absolutevalue{\psi_{\rm S, G}({\bf r'})}^{2}\ , (9) \displaystyle E_{\rm BMF} \displaystyle=\int d{\bf r}\epsilon_{\rm BMF}\left(\absolutevalue{\psi_{\rm S, G}({\bf r})}^{2}\right)\ , (10) where the subindex “S, G” of Eq. 7 refers to the senoidal and gaussian ansatz, respectively. The contributions to the energy per particle E/N for the senoidal ansatz are given by \displaystyle E_{1}/N \displaystyle=\frac{\hbar^{2}A^{2}k^{2}}{8m}\frac{1}{2\pi}\int_{-\pi}^{\pi}d\xi\frac{\sin^{2}(\xi)}{1+A\cos\xi}+\frac{\hbar^{2}}{4m\sigma_{z}^{2}}+\frac{m\omega^{2}\sigma_{z}^{2}}{4}\ , (11) \displaystyle E_{\rm V}/N \displaystyle=\frac{n_{\rm 2D}}{2}\left(\tilde{V}(0,0)+\frac{A^{2}}{2}\tilde{V}(0,k)\right)\ , (12) \displaystyle E^{\rm high}_{\rm BMF}/N \displaystyle=C_{4}n^{3/2}_{\rm 2D}\sqrt{\frac{2}{5\sigma_{z}^{3}\pi^{3/2}}}\frac{1}{2\pi}\int_{-\pi}^{\pi}d\xi\left(1+A\cos\xi\right)^{5/2}\ , (13) \displaystyle E^{\rm low}_{\rm BMF}/N \displaystyle=C_{1}\frac{1}{\sqrt{2\pi}\sigma_{z}}n_{\rm 2D}\frac{1}{2\pi}\int_{-\pi}^{\pi}d\xi\left(1+A\cos\xi\right)^{2}+C_{2}\frac{1}{\sqrt{3}\pi\sigma_{z}^{2}}n^{2}_{\rm 2D}\frac{1}{2\pi}\int_{-\pi}^{\pi}d\xi\left(1+A\cos\xi\right)^{3} \displaystyle+C_{3}n^{3/2}_{\rm 2D}\sqrt{\frac{2}{5\sigma_{z}^{3}\pi^{3/2}}}\frac{1}{2\pi}\int_{-\pi}^{\pi}d\xi\left(1+A\cos\xi\right)^{5/2}\ , (14) where the term \tilde{V}(k_{x},k_{y}) of Eq. 12 is [ 33 ] \displaystyle\tilde{V}(k_{x},k_{y}) \displaystyle=\frac{2\sqrt{2\pi}\hbar^{2}a}{m\sigma_{z}}-\frac{2\sqrt{2\pi}\hbar^{2}a_{\rm dd}}{m\sigma_{z}} \displaystyle+\frac{6\hbar^{2}a_{\rm dd}}{m}\int_{-\infty}^{\infty}dk_{z}\frac{k_{x}^{2}}{k^{2}}\exp\left(-\frac{k_{z}^{2}\sigma_{z}^{2}}{2}\right)\sin^{2}\alpha \displaystyle+\frac{6\hbar^{2}a_{\rm dd}}{m}\int_{-\infty}^{\infty}dk_{z}\frac{k_{z}^{2}}{k^{2}}\exp\left(-\frac{k_{z}^{2}\sigma_{z}^{2}}{2}\right)\cos^{2}\alpha\ . (15) In much the same way, the contributions of E/N for the gaussian ansatz are \displaystyle E_{1}/N \displaystyle=\frac{\hbar^{2}}{2m}\left(\frac{1}{2\sigma_{y}^{2}}+\frac{1}{2\sigma_{z}^{2}}\right)+\frac{m\omega^{2}\sigma_{z}^{2}}{4}\ , (16) \displaystyle E_{\rm V}/N \displaystyle=\frac{n_{\rm 2D}}{2}\left(\frac{L_{y}}{\sqrt{\pi}\sigma_{y}}\right)^{2}\left(A_{0}^{2}\tilde{V}(0,0)+\sum_{j=1}^{\infty}\frac{A_{j}^{2}}{2}\tilde{V}(0,jk)\right)\ , (17) \displaystyle E^{\rm high}_{\rm BMF}/N \displaystyle=\frac{2C_{4}}{5}\left(\frac{n_{\rm 2D}L_{y}}{\pi\sigma_{y}\sigma_{z}}\right)^{3/2}\ , (18) \displaystyle E^{\rm low}_{\rm BMF}/N \displaystyle=\frac{C_{1}}{2}\frac{n_{\rm 2D}L_{y}}{\pi\sigma_{y}\sigma_{z}}+\frac{C_{2}}{3}\left(\frac{n_{\rm 2D}L_{y}}{\pi\sigma_{y}\sigma_{z}}\right)^{2}+\frac{2C_{3}}{5}\left(\frac{n_{\rm 2D}L_{y}}{\pi\sigma_{y}\sigma_{z}}\right)^{3/2}\ , (19) where we have assumed that L_{y}\gg\sigma_{y} . The coefficients A_{j} from Eq. 17 are obtained from the Fourier series of the density and given by \displaystyle A_{j} \displaystyle=f_{j}\frac{\sqrt{\pi}\sigma_{y}}{L_{y}}\exp\left(-\frac{(2\pi j\sigma_{y})^{2}}{4L_{y}^{2}}\right)\ , (20) where f_{0}=1 and f_{j}=2 for j>0 . The variational minimization of the energy per particle for each ansatz is performed numerically via a Simulated Annealing algorithm [ 53 ] . In practice, the infinite sum of Eq. 17 is truncated in the numerical calculation, and the number of coefficients is chosen to achieve convergent results. We have found it sufficient to sum up to j=2000 to ensure convergence. Performing a functional minimization of Eq. 1 with respect to \psi^{*}({\bf r}) with the constrain N=\int d{\bf r}\absolutevalue{\psi({\bf r})}^{2} we obtain the zero temperature, extended Gross-Pitaevskii equation (eGPE), which is given by \displaystyle\mu\psi({\bf r})=\left[-\frac{\hbar^{2}\nabla^{2}}{2m}+U({\bf r})+\int d{\bf r^{\prime}}V({\bf r}-{\bf r^{\prime}})\absolutevalue{\psi({\bf r'})}^{2}\right. \displaystyle\left.+\evaluated{\pdv{\epsilon_{\rm BMF}}{n}}_{n=\abs{\psi({\bf r})}^2}\right]\psi({\bf r})\ . (21) We use the eGPE to benchmark our variational calculations in the thermodynamic limit and to study the finite size system under a box trap in the x - y plane. Figure 2: Energy per particle for the senoidal (top, see Eq. 5 ) and gaussian (bottom, see Eq. 6 ) ansatz, respectively. The value of the scattering length is set to a/a_{\rm dd}=0.7 . We have subtracted the energy of the non-interacting system, E_{\rm NI}/(NE_{0})=\hbar\omega/(2E_{0}) . III Results III.1 Infinite system We start by discussing the results for the infinite system. In this case, the trapping potential in Eq. 1 is set to U({\bf r})=\frac{1}{2}m\omega^{2}z^{2} , while the system extends indefinitely in the x - y plane. In practice, we apply periodic boundary conditions in the x - y plane, with the simulation box determined by the lengths L_{x}=L_{y} that minimize the energy per particle at each density. Therefore, by considering infinite replicas of our simulation box, we are taking the limit N\rightarrow\infty , L_{y}\rightarrow\infty for a given 2D density n_{\rm 2D} (thermodynamic limit). Unless specified otherwise, we set the trapping strength along the z -axis to \omega=2\pi\times 906 Hz in all calculations, which in our units corresponds to \hbar\omega/E_{0}=1 for 164 Dy atoms. This trapping strength is close to the one employed in the recent experiment [ 27 ] , where the BKT transition was probed for a dipolar system. For a given value of the s -wave scattering length a , tilting \alpha and 2D density n_{\rm 2D} , we can minimize the energy per particle E/N for each of the two ansatz of Eqs. 5 and 6 . In particular, we are interested in the state of the system at the equilibrium 2D density n^{\rm eq.}_{\rm 2D} , i.e. the 2D density at which the energy per particle is minimized. We illustrate the different qualitative behaviour of the energy per particle as a function of n_{\rm 2D} for the two ansatz in Fig. 2 for two different sets of parameters \{a/a_{\rm dd},\alpha\}=\{0.7,70.47^{o}\} and \{0.7,77.35^{o}\} . From the figure, we see that E_{\rm G}/N increases monotonously with the density in both cases and the minimum value is achieved for n_{\rm 2D}\rightarrow 0 , with N\text{, }L_{x}L_{y}\rightarrow\infty . This is because the gaussian ansatz describes an array of incoherent stripes, spaced by a distance L_{y} . Since the inter-stripe energy is globally repulsive, the minimum energy is achieved for infinitely spaced stripes, characterized by a given ratio of particles per length along the x -axis, N/L_{x} . Moreover, in the range of values of L_{y} where the inter-stripe interactions are neglectable, E_{\rm G}/N stays essentially unchanged for n_{\rm 2D}L_{y}=\text{constant} . The gaussian ansatz describes a striped system that can correspond to either a gas ( E_{\rm G}/N>E_{\rm NI}/N ) or a liquid ( E_{\rm G}/NE_{\rm NI}/N , a finite system expands indefinitely to reduce its energy while if E_{\rm G}/N1750 and \hbar\omega_{x}/E_{0}=3.91\times 10^{-6} and \hbar\omega_{y}/E_{0}=3.53\times 10^{-5} for N\leq 1750 . These trapping frequencies have been chosen such that the characteristic length scale of the trap is significantly larger than the size of the self-bound droplets, such that the contribution to the energy by the trapping term is neglectable. It must be remarked that we are only considering the formation of stable droplets, for which E/N<\hbar\omega/2 , although metastable droplets for which E/N>\hbar\omega/2 may arise for slightly lower tilting angles/particle numbers. On a technical note, the swap from a box trap to a harmonic trap responds to the need to compute the kinetic energy term in this case via a Fast-Fourier Transform (FFT) algorithm instead of doing so by using a finite differences formula. This is because this alternative offers a better convergence with the number of spatial grid points. While in the rest of the calculations of our work we use a number of grid points for which the two methodologies give equivalent results, fine numerical accuracy is specially important when determining the formation of stable droplets with the aforementioned energy criterion. The FFT kinetic energy computation could have also been applied for the box trap, but our particular implementation of this trapping potential relies on setting to zero the points of the wave function at the ends of the spatial grid in the kinetic energy calculation through finite differences. The results of Fig. 10 have been obtained for a spatial grid with \{N_{x},N_{y},N_{z}\}=\{50,100,40\} points with an imaginary time step of \Delta\tau=0.0005\hbar/E_{0} and N_{\rm it}=300000 iterations. The solution of the eGPE yields a minimum tilting angle for stable droplet formation of \alpha=72.31^{o} for the parameters considered, which lays close to the tilting for the liquid-gas phase transition for the infinite system (see Fig. 3 ), \alpha=71.68^{o} . The slight discrepancy between both values most likely arises from the variational approximation employed in the calculations of the infinite system. The realization of these self-bound droplets in experiments with flattened geometries is also feasible, since the peak density fulfills n_{\rm peak}<10^{15} cm -3 for \alpha<77.92^{o} , meaning that three-body losses should be manageable in the regime \alpha\in(72.31^{o},77.92^{o}) . IV Conclusions In conclusion, we have computed the phase diagram at the 2D equilibrium density of a system of tilted dipolar bosons under a realistic harmonic confinement along the z -axis. We have done so by performing a variational calculation, which we have benchmarked with the solution of the extended Gross-Pitaevskii equation. We have included the effect of beyond mean-field corrections accounting for the discretization of excitation energies along the trapping direction. The diagram hosts three distinct phases in the thermodynamic limit: a gas phase, an unmodulated liquid phase and a striped, modulated liquid phase. Remarkably, and distinctly to the phenomenology in the strict 2D limit, the liquid phases emerge even if the two-body interaction does not host a two-body bound state. We have characterized the transitions between these phases, and have sketched the effect of increasing the trapping strength. We have also performed simulations for the finite system, and have connected the phenomenology in the thermodynamic limit with the results. We have illustrated several cases within experimental reach where the realization of potentially supersolid striped states should be possible, and have also characterized the formation of self-bound, stable liquid droplets for a realistic value of the scattering length of a=91.56a_{0} for 164 Dy atoms, and for realistic particle numbers. Our results should serve to motivate and guide potential future experiments in the study of dipolar systems in flattened geometries, in the quasi-2D limit, especially in regards to the realization of liquid phases and supersolid striped states. The proper quantification of the superfluid properties of such states is a matter for future work, where exact quantum Monte Carlo methods could be applied to exactly obtain the superfluid fraction across stripes. Moreover, the role played by dimensionality in thermal effects should also be more extensively characterized in order to check if the surprising and counter-intuitive promotion of supersolidity by heating seen in three dimensions [ 15 , 16 , 17 ] is robust to dimensionality. We acknowledge financial support from Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Spain) under Grant No. PID2023-147469NB-C21 and from AGAUR-Generalitat de Catalunya Grant No. 2021-SGR-01411. Appendix A Determination of n_{\rm lim} and the fitting constants of Eqs. 3 and 4 In order to determine the limiting 3D density n_{\rm lim} from Eqs. 3 and 4 in the main text, we numerically compute the beyond mean-field correction to the chemical potential, \mu_{\rm BMF} , which can be obtained from the solution of the Bogoliubov de-Gennes equations in the usual manner. The only remarks are the use of the potential in Fourier space employed in Ref. [ 25 ] and the fact that the excitations along the z -axis are discrete. Since this quantity is ultraviolet divergent, as it is well known, we employ the standard renormalization procedure used in three-dimensions, analogously to the renormalization of the energy density performed in Ref. [ 25 ] . We then choose n_{\rm lim} such that the ratio \mu_{\rm BMF}/\mu_{\rm 3D}<1.3 for n>n_{\rm lim} for all the calculations considered in this work. Here, \mu_{\rm 3D} is the usual beyond mean-field correction for a dipolar system in three-dimensions, i.e. \displaystyle\mu_{\rm 3D}=\frac{32g\sqrt{a^{3}}}{3\sqrt{\pi}}\mathcal{Q}_{5}\left(\frac{a_{\rm dd}}{a}\right)n^{3/2}, (25) where g=4\pi\hbar^{2}a/m and and Q_{5}(\varepsilon_{\mathrm{dd}})=\dfrac{1}{2}\displaystyle\int_{0}^{\pi}\mathrm{d}\alpha\sin\alpha\left[1+\varepsilon_{\rm dd}(3\cos^{2}\alpha-1)\right]^{5/2} .. The constants of Eqs. 3 and 4 are then obtained by fitting the correction of the chemical potential to \displaystyle\mu^{\rm low}_{\rm BMF}(n) \displaystyle=\tilde{C}_{1}n+\tilde{C}_{2}n^{2}+\tilde{C}_{3}n^{3/2} \displaystyle nn_{\rm lim}\ . (27) Figure 11: Beyond mean-field correction to the chemical potential obtained from the solution of the Bogoliubov de-Gennes equations (black dash-dotted line) as a function of the 3D density. The solid and dashed lines correspond to the fits of Eqs. 26 and 27 , respectively. The labels “Low density region” and “High density region” make reference to the superscripts “low” and “high” of Eqs. 26 and 27 . The parameters are a/a_{\rm dd}=0.7 and \alpha=75.92^{o} . Then, using the relation \evaluated{ \pdv{\epsilon_{\rm BMF}}{n} }_{V}=\mu_{\rm BMF} we obtain C_{1}=\tilde{C}_{1}/2 , C_{2}=\tilde{C}_{2}/3 and C_{3,4}=2\tilde{C}_{3,4}/5 . We show in Fig. 11 , the ratio \mu_{\rm BMF}/\mu_{\rm 3D} as a function of the density for a/a_{\rm dd}=0.7 , \alpha=75.91^{o} , \hbar\omega/E_{0}=1 , together with the fits of Eqs. 26 and 27 . For these parameters, we find n_{\rm lim}r_{0}^{3}=0.06 . State n_{\rm 2D}r_{0}^{2} E/(NE_{0})-\hbar\omega/(2E_{0}) L_{y}/r_{0} Triangular 1 -0.456 600 Triangular 0.5 -0.472 1040 Triangular 0.25 -0.483 2000 Triangular 0.125 -0.488 4000 Stripe 0.5 -0.490 880 Table 2: Energies per particle of the converged triangular states and the optimal stripe state for a/a_{\rm dd}=0.6 , \alpha=75.9^{o} . The triangular states are obtained by using the ansatz of Eq. 28 as the initial state of the eGPE simulations. We also report the box size length L_{y}/r_{0} that yields the optimal energy per particle. Appendix B Existence of triangular solid and honeycomb ground states Previous works which consider lower values of the tilting angle show the emergence of both a triangular and honeycomb states as the ground state of the system for a given range of densities [ 38 , 39 , 41 ] . In the variational calculations performed in this work, we have not consider neither of these states. However, we can argue that they do not correspond to the ground state of the system at the equilibrium density for the parameters of choice of our work. Firstly, in regards to the honeycomb state, increasing the tilting angle shrinks the domain of its region in the ( a/a_{\rm dd},n_{2D} ) phase diagram of the system, pushing it to densities considerably higher than the ones obtained in this work [ 41 ] . Because of this, it is safe to ignore it for the high tilting angles considered here ( \alpha>69^{o} ). Moreover, this assumption is consistent with the results of Ref. [ 52 ] , where \alpha\in[57^{o},69^{o}] and the honeycomb state is not found in the phase diagram of the system computed at the equilibrium density. In regards to the triangular solid phase, the results of Ref. [ 41 ] show that the phase domain of this state is pushed to lower values of the scattering length and lower densities as the tilting increases. Thus, if it is not the ground state at the equilibrium density for the lowest value of the scattering length considered ( a/a_{\rm dd}=0.6 ), we can rule out its existence for the purposes of this work. To check this, we have numerically solved the eGPE (see Eq. 21 ) for a/a_{\rm dd}=0.6 and different values of the density and for tilting angles \alpha=71.9^{o},75.9^{o},77.9^{o} . To guarantee the convergence into a triangular solid state, we start the simulation from an initial state given by \displaystyle\psi_{0}(\bf{r})=\mathcal{N}\left(1+0.3\cos({\bf k_1} {\bf r_{\perp}})\right. \displaystyle\left.+0.3\cos({\bf k_2} {\bf r_{\perp}})+0.3\cos({\bf k_3} {\bf r_{\perp}})\right)^{1/2} \displaystyle\times e^{-\frac{1}{2}\omega^{2}z^{2}} (28) which corresponds to a triangular lattice of clusters. Here, \mathcal{N} is a normalization constant such that N=\int d{\bf r}\absolutevalue{\psi_{0}(\bf{r})}^{2} . The momentum vectors are {\bf k_{1}}=k_{0}\hat{x} , {\bf k_{2}}=-k_{0}\left(\cos(\pi/3)\hat{x}+\sin(\pi/3)\hat{y}\right) and {\bf k_{3}}=k_{0}\left(-\cos(\pi/3)\hat{x}+\sin(\pi/3)\hat{y}\right) , with \hat{x} and \hat{y} the unitary vectors along the x and y axes. The momentum k_{0} is given by k_{0}=4\pi/L_{y} , such that two unit cells are present in the simulation box. The box lengths L_{x} and L_{y} satisfy L_{x}=\frac{\sqrt{3}}{2}L_{y} in order for the triangular solid to be commensurate. Figure 12: Integrated density n(x,y)=\int dz\absolutevalue{\psi({\bf r})}^{2} of the triangular solid solution of Eq. 21 for a/a_{\rm dd}=0.6 , n_{\rm 2D}r_{0}^{2}=1 at \alpha=75.9^{o} . We show the results of our calculations for \alpha=75.9^{o} in Table 2 , since the other cases follow a similar trend. The reported stripe state energy has been computed for n_{\rm 2D}r_{0}^{2}=0.5 , but it stays essentially invariant if the density is decreased as long as the quantity n_{\rm 2D}L_{y} stays constant. The number of grid points of the simulations have been set to \{N_{x},N_{z}\}=\{50,160\} points with an imaginary time step of \Delta\tau=0.00025\hbar/E_{0} . The number of points along the y axis is set to N_{y}=600 for n_{\rm 2D}r_{0}^{2}=2.5,5,10 , N_{y}=1200 for n_{\rm 2D}r_{0}^{2}=0.5,1 , N_{y}=2400 for n_{\rm 2D}r_{0}^{2}=0.25 and N_{y}=4800 for n_{\rm 2D}r_{0}^{2}=0.125 . We find that, for all the densities considered, the triangular state features an energy per particle higher than the striped state at n_{\rm 2D}\rightarrow 0 . In fact, the energy per particle of the triangular state tends to that of the stripe state as the density decreases. This is because the converged triangular solid features extremely anisotropic, striped-like droplets at each lattice position, as shown in Fig. 12 . Notice that, as the density decreases, the box size increases such that the particle number of each droplet yields the optimal energy per particle. As a result, in the limit n_{\rm 2D}\rightarrow 0 the optimal triangular solid corresponds to an array of infinitely separated stripes. However, the energy of the triangular solid is always above the striped state due to the extra kinetic energy at the border of the anisotropic droplets. Results at a higher density than the ones considered in Table. 2 yield triangular solid states with higher energy per particle than the optimal stripe state until, for high enough density ( n_{\rm 2D}r_{0}^{2}\sim 5 for \alpha=75.9^{o} ), the elongated droplets merge and the simulation converges instead to a stripe state. Therefore, our results indicate that the stripe state is always energetically favored over the triangular state and, therefore, the latter does not appear in the phase diagram of Fig. 3 .