Ground states of quasi- two-dimensional correlated systems via energy expansion Sam Mardazad, Nicolas Laflorencie, Johannes Motruk, Adrian Kantian Abstract We introduce a generic method for computing groundstates that is applicable to a wide range of spatially anisotropic 2D many-body quantum systems. By representing the 2D system using a low-energy 1D basis set, we obtain an effective 1D Hamiltonian that only has quasi-local interactions, at the price of a large local Hilbert space. We apply our new method to three specific 2D systems of weakly coupled chains: hardcore bosons , a spin- 1 / 2 1/2 Heisenberg Hamiltonian, and spinful fermions with repulsive interactions. In particular, we showcase a non-trivial application of the energy expansion framework, to the anisotropic triangular Heisenberg lattice, a highly challenging model related to 2D spin liquids. Treating lattices of unprecedented size, we provide evidence for the existence of a quasi- 1D gapless spin liquid state in this system. We also demonstrate the energy expansion -framework to perform well where external validation is possible. For the fermionic benchmark in particular, we showcase the energy expansion -framework’s ability to provide results of comparable quality at a small fraction of the resources required for previous computational efforts. Preprint: APS/123-QED I Introduction Quantum systems comprised of weakly coupled one-dimensional (1D) subsystems (c.f. Fig. 1 ) represent an important area in the study of correlated many-body physics. Not only are three different groups of repulsively-mediated superconductors in this class (the Bechgaard and Fabré salts [ 1 , 2 ] , the “telephone-number” compounds [ 3 , 4 ] and chromium pnictide [ 5 , 6 ] ), but so are Cs 2 CuCl 4 [ 7 , 8 , 9 ] and Cs 2 CuBr 4 [ 10 , 11 ] , paradigmatic materials in the ongoing search for two-dimensional (2D) spin liquids [ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 ] . As for their more isotropic siblings (e.g. cuprates for repulsively mediated superconductivity [ 31 , 32 , 33 ] , \kappa -(ET) 2 Cu 2 (CN) 3 and EtMe 3 Sb[Pd(dmit) 2 ] 2 for spin liquids [ 34 , 35 , 36 ] ), progress on understanding the correlated phases of these materials at low temperatures has been famously slow, due to the outstanding difficulty of obtaining reliable theory for a great number of 2D correlated quantum systems. At the same time, the spatial anisotropy of such materials has long been recognized as a significant potential advantage over their isotropic cousins, namely due to the uniquely powerful theoretical methods for the 1D sub-units that make up these materials. The use of analytical Tomonaga-Luttinger liquid (TLL) theory [ 37 ] and matrix product state (MPS) numerics [ 38 , 39 ] has yielded insights for 1D correlated systems that are unmatched for higher-dimensional ones. Thus, for anisotropic 2D and three-dimensional (3D) models as well as for materials made up from weakly coupled 1D sub-units, one strategy has been to leverage this unparalleled understanding of the 1D physics to the full, higher-dimensional system [ 40 , 41 , 42 , 43 ] . A striking early example of this are the 3D model materials for repulsively-mediated high- T_{c} superconductivity formed out of many doped two-leg Hubbard ladders [ 37 , 44 ] . Combining a TLL -description of the isolated ladders with a static mean-field (MF) treatment of the weak inter-ladder tunneling yielded a conclusive description for the possibility of high- T_{c} superconductivity down to the level of repulsively mediated microscopic pairing, which remains an unrealized goal for isotropic 2D and 3D models to this day. More recently, this line of work has been further expanded on with the MPS + MF treatment of fermions, which allowed the first quantification of superconducting properties in these model materials, as well as resolving the competition with alternative insulating phases [ 45 , 46 ] . This MPS + MF framework for fermions had developed out of earlier MPS + MF approaches for anisotropic systems of either spins or bosons, for which the low-cost theoretical modeling of the magnetic BPCB compound had been a particularly noteworthy achievement [ 47 , 48 , 49 , 50 , 51 ] . This compound is one of numerous remarkable quasi-1D spin materials that exhibit non-trivial dimensional crossover effects, such as the S=1/2 ladder (C 7 H 10 N) 2 CuBr 4 (DIMPY) [ 52 , 53 , 54 , 55 ] , or the S=1 chain NiCl 2 - 4 SC(NH 2 ) 2 (DTN) compound [ 56 , 57 ] . Yet the treatment of anisotropic correlated 2D systems by MF -decoupling the interactions between the 1D sub-units has significant limitations. For all three existing classes of anisotropic repulsion-mediated superconducting materials, as well as for the spin liquid candidate materials Cs 2 CuCl 4 and Cs 2 CuBr 4 , such decoupling is either inadmissable or ill-defined. One approach to exploit spatial anisotropy for these systems beyond static mean-field was chain dynamical mean field theory (chDMFT) [ 58 , 59 ] . It would treat a single 1D sub-unit – Hubbard chains with various repulsive short-range interactions – explicitly and would represent the rest of the system via a self-consistent hybridization function. But due to the underlying Quantum Monte Carlo (QMC) solver, this approach battles the exponential scaling to solution with decreasing temperature known as the sign problem, and would not be useful for any of the near- 1D anisotropic superconducting materials. For spin systems such as those realized in Cs 2 CuCl 4 and Cs 2 CuBr 4 , even setting up a chDMFT algorithm would be difficult due to the inherent geometric frustration. Brute-force applications of MPS -based numerics such as the density matrix renormalisation group (DMRG) to compute the ground states of 2D systems are generally also severely limited, especially when spatial anisotropy is large [ 22 ] . When these algorithms are confined to shared-memory parallelism, typically only long, narrow strips are feasible, as entanglement entropy grows rapidly with the width of the strip [ 60 , 61 ] . Distributed-memory parallelism as implemented in p DMRG can treat significantly wider systems, especially when combined with exploitation of the spatial anisotropy [ 62 ] . Nevertheless, even these high-performance implementations will rapidly struggle once the width of the strip approaches a significant fraction of its length. They also presuppose copious computational time and simultaneous access to many nodes of a high-performance supercomputer with fast inter-node connections. In addition to multiple recent and prolific numerical developments [ 63 , 64 , 65 , 66 , 67 ] , there are two other classes of algorithms geared at 2D correlated systems at low or zero temperature that are more generic, in that they do not presuppose a spatial anisotropy, and that aim to reduce resource requirements at the price of introducing approximations. These are projected entangled-pair states (PEPS) , which represents a class of variational ansatz states build on higher-order tensor networks [ 68 ] , and constrained-path or phase- free auxiliary-field Quantum Monte Carlo (AFQMC) , which builds on the standard AFQMC for lattice fermions and purposefully removes the fermionic sign problem in different ways [ 69 ] . While these algorithms can be powerful, the level of their approximations can individually depend on the specific physical system. An approach such as PEPS , which is generally limited to low bond dimensions will also generally struggle to retain enough entanglement to describe an anisotropic system accurately in the strong-coupling direction. What would be called for is a numerical technique that leverages the particular advantage inherent to spatially anisotropic problems, while also exhibiting only controlled approximation errors and being equally applicable to bosonic and fermionic systems. In the present work, we introduce a generic numerical technique to calculate the many-body ground states of a variety of spatially anisotropic 2D quantum systems that are comprised of weakly coupled 1D sub-units. The essence of this approach is to represent the system in the low-energy basis of the individual 1D sub-units. This representation yields a new effective 1D Hamiltonian with a large local Hilbert space, spanned by those low-energy many-body states of the 1D sub-units that are being retained, as sketched in Fig. 1 . The error introduced by limiting the energy-width of the 1D basis set is a controlled one, in that the approach starts from the lowest lying excitations and systematically incorporates more and more higher-energy states; if all states could be retained, the full Hilbert-space of the 2D system would be recovered. As long as the energetic widths of the retained 1D -spectra exceed the coupling range of the interactions between the 1D sub-units, this approach is able to capture the physics of the 2d ground state well and with surprisingly low computational effort. We demonstrate the algorithm’s resulting ability to reach lattice sizes that would be infeasible with other controlled-approximation many-body numerics for both repulsively interacting fermions as well as frustrated spin systems. We point out that as the present work was concluded, we have become aware of a similar approach for arrays of coupled 1D continuum systems, but constrained to integrable models for which the 1D basis is known analytically [ 70 , 71 ] . The paper is organised as follows. In Section II we outline the main technical components of this approach, and discuss the use of symmetries to speed up calculations, how observables are computed, and the main sources of error. In Section III , we then show the concrete application of the energy expansion (EE) -approach to obtain ground state properties for 2D Hamiltonians of spinless bosons, unfrustrated and frustrated spins, as well as repulsively interacting spinful fermions in a doped regime. Where possible, here we also benchmark against alternative approaches in order to validate the EE -technique. Finally, in Section IV , we summarize the main strengths and drawbacks of the EE -technique, and discuss the outlook for its application to other concrete systems, as well as for further improving its performance and widening its scope. II Method Figure 1: Weakly interacting chains where particles can hop with transition probability t=1 ( ) or t_{\perp}0} . The notation {\langle i,j\rangle_{x}} implies nearest neighbours in x -direction only, while {\langle i,j\rangle_{\perp}} denotes nearest neighbours in the perpendicular direction, a set of bonds that will be different between the square and the triangular lattice (c.f. Fig. 1 and Fig. 4 ). The operators are defined in the standard way, {\hat{\bm{S}}_{i}=\left(\hat{S}^{x}_{i},\hat{S}^{y}_{i},\hat{S}^{z}_{i}\right)^{\intercal}} being a vector of spin- 1/2 -operators on site {i=(x,y)} . In this subsection, we also always consider a square-shaped geometry, i.e. L=W . III.2.1 Square lattice: anisotropic Heisenberg antiferromagnet Figure 4: Triangular lattice made up of weakly coupled chains where spins interact with coupling strength J=1 ( ) or J_{\perp} ( ). The blue lines ( ) show the choice of our elementary vectors. The unfinished lines in x -direction indicate PBCs while the horizontal direction has OBCs . We exploit that the Heisenberg Hamiltonian in the S_{z}=0 subspace can be mapped to hardcore bosons at half-filling, as recapped in Appendix G . While the spin-spin-coupling in the z -direction leads to an additional density-density interaction term in the direction of transverse coupling compared to Section III.1 , we can keep using the local basis Eq. 25 . We therefore require comparable resources, except for the growth of the EE - matrix product operator (MPO) bond dimension. Analogous to the mapping that yields Eq. 22 from Eq. 20 and Eq. 21 , for the square lattice we thus obtain \displaystyle\hat{H}_{\square}=J\sum_{y}\hat{E}_{y} \displaystyle+J_{\perp}\sum_{xy}\left(\hat{\beta}_{y}(x)^{\dagger}\hat{\beta}_{y+1}(x)^{\vphantom{\dagger}}+\hc\right) \displaystyle+2J_{\perp}\sum_{xy}\hat{\eta}_{y}(x)\hat{\eta}_{y+1}(x) (28) from the original Hamiltonian, Eq. 27 . The definition of the supersite operators \hat{\beta} and \hat{\beta}^{\dagger} is the same as in 23 and 24 , exploiting the standard mapping of spin- 1/2 operators to HCB , i.e. {\hat{b}^{\dagger}:=\hat{S}^{x}+i\hat{S}^{y}} (c.f. Appendix G ). Complementing these operators is the local density operator expressed in the 1D basis of the chains: \displaystyle\hat{\eta}_{y}(x) \displaystyle=\hat{1}_{1}\otimes\ldots\sum_{nee^{\prime}}\matrixelement{n,e^\noprime}{\qop n_x}{n,e^\prime}_{y}\outerproduct{n,e^\noprime}{n,e^\prime}_{y}\ldots\otimes\hat{1}_{W}\;\text{.} (29) This operator appears again during the mapping of spins to HCB , {\hat{n}:=\hat{S}^{z}+1/2} . Our primary aim in studying the ground state of \hat{H}_{\square} is to quantify the capacity of the EE framework to describe ordered states of 2D many-body systems. To achieve this goal, we exploit that the underlying Hamiltonian Eq. 27 on a square lattice can be treated with high efficiency using QMC techniques, such as the stochastic series expansion (SSE) [ 78 ] . This technique scales linearly in the number of lattice sites and inverse temperature, with the statistical error decreasing with the square root of the independent Monte Carlo samples. For the range of parameters that we target here, SSE - QMC renders a benchmark that is exact for all practical purposes. To gauge the performance of the EE -technique against the QMC gold standard, we focus on the spin-spin correlation functions both along one of the two central chains as well as along the perpendicular coupling direction: \displaystyle C(x) \displaystyle=\matrixelement{ \psi}{ \qop S^z_{c,c} \qop S^z_{c+x,c} }{ \psi}\;\text{,} (30) \displaystyle C_{\perp}(y) \displaystyle=\matrixelement{ \psi}{ \qop S^z_{c,c} \qop S^z_{c,c+y} }{ \psi}\;\text{,} (31) where c=L/2=W/2 picks out one of the four central sites in our chosen lattices, for which both L and W are even. As shown in Fig. 5a , the EE framework matches the QMC benchmark very well in the strong-coupling x -direction, the error in the correlator even at maximal distance reaching at most 6\text{\,}\mathrm{\%} for the largest lattice ( {L=W=24} ). In the transverse direction, where correlations are naturally significantly weaker, the EE -based calculations see a stronger increase in error as the system size grows, even at the lowest J_{\perp} -value, as illustrated in Fig. 5c . Nevertheless, the EE approach still captures the existence of an ordered anisotropic AFM state [ 40 , 42 , 55 ] . Indeed, in the regime {J_{\perp}\ll J} for finite lattices, the transverse correlations are found to decay with a W -dependent exponentially decaying envelope, \displaystyle|C_{\perp}(y)| \displaystyle\propto\mathsf{e}^{-y/\xi_{\perp}(W)}\;\text{.} (32) but the length-scale \xi_{\perp}(W) associated with this decay itself grows at least linearly with the value of W , recovering the ordered AFM in the thermodynamic regime. As summarized in Fig. 5d , both our EE framework and the QMC benchmarks correctly capture this physical behaviour for a range of small J_{\perp}/J -values. While the EE approach is capable of reproducing the correct physics, it does underestimate the magnitude of \xi_{\perp}(W) systematically compared to the QMC benchmark. This systematic error grows with lattice size and the value of J_{\perp}/J . This trend is to be expected, for two reasons: (1) As L grows, the size of the retained single-chain basis \ket{e} would need to increase exponentially if every state within the retained bandwidth of energy contributed equally. In practice we observe that at the level of the weights on the diagonal of the single-chain RDM , more than 90\text{\,}\mathrm{\%} of the weight is in the ground state of \hat{H}_{1} , with some additional percentages for the first excited state of the quantum number sector of that ground state, as well as to the ground states of the adjacent sectors. Beyond that, in every relevant quantum number sector, the higher in energy a state \ket{e} is relative to that sector’s ground state \ket{0} , the less it contributes to the 2D wave function in general. At the same time, there is also a significant variation, with a long tail of states with spiking contributions that will be increasingly difficult to incorporate as L is increased, as illustrated in Fig. 12 . Still, we find that observables appear to converge in the size of the retained basis-set \ket{e} of the chains, for which examples are shown in Fig. 17 . (2) Even though the targeted state is ordered, the entanglement entropy of the 2D wavefunction scales with subsystem boundary. Consequently, the truncated weight increases strongly when the maximal bond dimension is fixed to the RAM -limited value of 256 , as shown in Fig. 11 . Toward the upper range of L and J_{\perp} , we observe that the truncated weight begins to saturate, clearly due to an insufficient bond dimension. (a) (b) (c) (d) Figure 5: Figures 5a and 5b show the algebraic decay of the S^{z}S^{z} -correlator for L=16,20,24 along the strong coupling direction and with an interchain coupling of J_{\perp}/J=0.1 for the square ( \square ) and the triangular ( \triangle ) system, respectively (c.f. discussion below Eq. 31 and Eq. 34 ). The inset of Fig. 5b shows |C(x)| on a double logarithmic scale. Figure 5c shows |C_{\perp}(y)| at J_{\perp}=0.1 (c.f. discussion in main text). Figure 5d shows the perpendicular correlation length \xi_{\perp}(L) for multiple values of J_{\perp}=0.1,0.15,0.2 . There are ways to mitigate the RAM bottleneck and increase the bond dimension, as discussed in Section D.3 . As the present study of the AFM ordered state on the anisotropic Heisenberg model on the square lattice is a proof of principle, we do not pursue these alternatives further here. III.2.2 Triangular lattice: quasi- 1D spin liquid The Heisenberg model, Eq. 27 , placed on the anisotropic triangular lattice (c.f. Fig. 4 ) has been subject to a number of previous studies. These are motivated by the realization of this model - or a close variant of it - in Cs 2 CuCl 4 and Cs 2 CuBr 4 , which are believed to host quantum spin liquid states [ 9 ] . Previous theoretical work yielded conflicting predictions for the ground or low-temperature state of this model in the physically relevant regime of J_{\perp}\ll J [ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 27 , 29 , 30 ] . This is due to the substantial technical difficulty in obtaining solutions for larger lattices. Not only are any QMC -based techniques incapable of addressing even moderately sized lattices at low or zero temperature due to the sign-problem, which is caused by the frustrated nature of nearest-neighbour coupling in this type of lattice. Also, attempts at brute-force application of the DMRG -algorithm to these 2D systems are made difficult exactly by the anisotropic nature of the lattice: a low ratio of J_{\perp}/J causes a failure to converge in any standard zig-zag mapping in the y -direction [ 22 ] . The alternative, which would be to combine a mapping in the x -direction with p DMRG , would require simultanous access to many compute notes over a sustained period, and even then it is possible that this approach would not be able to treat many chains [ 62 ] . The EE -approach however is tailor-made for this regime, as the frustrated nearest-neighbour coupling can be expected to reduce entanglement between chains, and thus the bond dimension required to efficiently approximate the true 2D ground state with the underlying choice of MPS -representation (c.f. Fig. 1 ). Using the lattice and coordinate definitions shown in Fig. 4 , we obtain the EE -Hamiltonian \hat{H}_{\triangle} for this lattice by adding to 28 : \displaystyle\hat{H}_{\triangle}=\hat{H}_{\square}+J_{\perp} \displaystyle\sum_{xy}\left(\hat{\beta}_{y}(x)^{\dagger}\hat{\beta}_{y+1}(x+1)^{\vphantom{\dagger}}+\hc\right) \displaystyle+2J_{\perp}\sum_{xy}\hat{\eta}_{y}(x)\hat{\eta}_{y+1}(x+1) (33) Along with this, we also use a modified definition of the transverse correlator, \displaystyle C_{\perp}(y) \displaystyle=\matrixelement{ \psi}{ \qop S^z_{c,c} \qop S^z_{c+y,c+2y} }{ \psi}\;\text{,} (34) which takes the triangular structure of the lattice into account, where equivalent sets of sites in the direction perpendicular to the x -axis will be found only on every second chain. Our results conclusively show the suitability of the EE framework for these anisotropic frustrated systems. While correlations C(x) in the strong-coupling direction are actually slightly enhanced over the isolated case as shown in Fig. 5b , the correlator C_{\perp}(y) is massively depressed when compared to the anisotropic square lattice, as shown in Fig. 5c . More importantly, the exponential decay of these correlations with distance appears to exhibit almost no dependence on the size of the system. Therefore, the correlation length \xi_{\perp} , that can be extracted from fitting, almost does not change with L and W as summarized in Fig. 5d , and increases only sub-linearly with J_{\perp}/J , c.f. Fig. 6 . Figure 6: Length-scale \xi_{\perp} for transverse correlations as a function of J_{\perp} for triangular lattices of different sizes. This is accompanied by a drastic decrease in the truncated weight as shown in Fig. 11 , while maintaining the same value of the bond dimension, m=256 , as for the square lattice. Complementing this is the observation that even more of the weight of the single-chain RDM is shifted to the ground state of the isolated chain than in the case of the square lattice, as shown in Fig. 12 . The ability of the EE -technique to treat this lattice at unprecedented sizes with controlled-approximation many-body numerics allows to draw inferences about the possible nature of the ground state of this model, which is the subject of intense and conflicting research. The strong suppression and size-independence of C_{\perp}(y) , coupled with the apparently algebraic behaviour of C(x) appears to support those works that predict this model to realize a gapless quasi- 1D spin liquid at low J_{\perp}/J [ 13 , 30 ] . Thus, our results seem incompatible with work that indicated an AFM at low J_{\perp}/J due to higher-order processes [ 16 ] . At the same time we cannot rule out with absolute certainty that the AFM order predicted in [ 16 ] isn’t so weak that it cannot be resolved even by the unprecedented lattice sizes accessible to our framework. Likewise, we find no sign that this model exhibits a phase transition around J_{\perp}/J\approx 0.6 . Such predictions had been based on ground state energies obtained from variational Quantum Monte Carlo (vQMC) calculations [ 25 ] , as well as series expansion [ 29 ] . However, our EE -calculated energies substantially improve upon those obtained from vQMC , as shown in Fig. 7 . Not only do we observe no change in the slope of the energy per site with changing J_{\perp}/J around 0.6 (c.f. Fig. 7 ), but the entanglement entropy, another possible indicator of a quantum phase transition, also does not exhibit distinguishing features for any J_{\perp}/J\leq 0.65 . The low truncated weights that we find at small J_{\perp}/J for the triangular lattice and the large bandwidth of energies spanned by the single-chain basis states that we incorporate (c.f. Fig. 11 and Fig. 12 , respectively) makes it likely that the EE -framework approximates the ground state wavefunction well in these cases. But despite the large lattices amenable to the EE -framework, we are prevented from drawing definite conclusions about the actual ground state properties of the model at this point, and will return to this question in future work. That is because we have encountered persistent problems in converging the wavefunction once a finite flux through the periodic direction is inserted into the Hamiltonian in order to locate states with spiral ordering that could compete with the quasi- 1D spin liquid [ 22 ] . This flux-insertion needs to be performed in two places, namely both in the single-chain Hamiltonian, and in the effective EE -Hamiltonian. The former is done by taking the first term of Eq. 27 , where the nearest-neighbour spin-flipping terms are modified, i.e. \displaystyle\hat{S}^{+}_{x,y}\hat{S}^{-}_{x+1,y}+ \displaystyle\hat{S}^{+}_{x+1,y}\hat{S}^{-}_{x,y} \displaystyle\rightarrow\mathsf{e}^{\mathsf{i}\phi}\hat{S}^{+}_{x,y}\hat{S}^{-}_{x+1,y}+\mathsf{e}^{-\mathsf{i}\phi}\hat{S}^{+}_{x+1,y}\hat{S}^{-}_{x,y}\;\text{.} (35) From the resulting isolated-chain Hamiltonian \hat{H}_{1}(\phi) a new basis-set \ket{e^\noprime(\phi)} needs to be constructed for every \phi -value of interest. A matching flux also needs to be inserted into \hat{H}_{\perp} in the EE -representation, which we do by modifying the diagonal tunneling terms in Eq. 33 : \displaystyle\hat{\beta}_{y}(x)^{\dagger} \displaystyle\hat{\beta}_{y+1}(x+1)+\hat{\beta}_{y+1}(x+1)^{\dagger}\hat{\beta}_{y}(x) \displaystyle\rightarrow\mathsf{e}^{\mathsf{i}\phi}\hat{\beta}_{y}(x)^{\dagger}\hat{\beta}_{y+1}(x+1)+\mathsf{e}^{-\mathsf{i}\phi}\hat{\beta}_{y+1}(x+1)^{\dagger}\hat{\beta}_{y}(x)\;\text{.} (36) In principle, searching for the flux-value that minimizes the energy of the 2D ground state would allow to test how the model transitions to a state with generically incommensurate spiral order as J_{\perp}/J grows. Such spiral order has to appear at some point, either continuously or due to a quantum phase transition [ 79 , 13 , 15 , 18 , 22 , 29 , 30 ] . However, in practice we have found it difficult to obtain converged wavefunctions at \phi\neq 0 . We have not yet identified the cause of this challenge, which grows pronouncedly with increasing J_{\perp}/J . Mitigating action, such as switching to single-site DMRG -updates is discussed in more detail in Section D.3 . This would be done with the aim of being able to increase bond dimension significantly within the constraints of RAM , in order to pull free of the manifold of metastable states that appears at finite flux. However, in this instance we have found no benefit from this approach so far, with energies only decreasing marginally on what in the overwhelming number of cases are still clearly metastable excited states of the effective 2D Hamiltonian. Figure 7: Energies for different system sizes and intrachain couplings J_{\perp} of the triangular lattice compared to vQMC data extracted from [ 25 ] for a 18\times 18 sites system. III.3 Fermions on square lattice Our final system are spin- 1/2 fermions on a square lattice with rectangular geometry, L\neq W . In general, stiff systems of weakly coupled 2D Fermi-Hubbard chains with repulsive interactions are minimal models for superconductivity as well as competing insulating phases in the organic Bechgaard and Fabré salts, and have been studied as such [ 62 , 80 ] . Generally, this is outstandingly difficult for controlled-approximation many-body calculations, for the same reasons as for the isotropic 2D -Hubbard model of the high- T_{c} superconductors: the sign-problem for QMC techniques, superlinear growth of entanglement-entropy with subsystem surface area for MPS -based algorithms [ 81 ] . Here, we want to provide a proof-of-concept study for the capacity of the EE -framework to obtain results of comparable quality to those obtained from massively parallelized p DMRG at a small fraction of the computational effort, which moreover can treat far wider lattices, and thereby actually address the 2D limit. The U-V -model of the Bechgaard and Fabré salts has the following form: \displaystyle\hat{H}_{1}=-\sum_{xy,\tau=\uparrow\downarrow}\left(\hskip-4.26773pt\vphantom{\hat{c}^{\dagger}_{\tau,xy}\hat{c}^{\vphantom{\dagger}}_{\tau,x+1y}+\hat{c}^{\dagger}_{\tau,x+1y}\hat{c}^{\vphantom{\dagger}}_{\tau,xy}}\right. \displaystyle\left.\hat{c}^{\dagger}_{\tau,xy}\hat{c}^{\vphantom{\dagger}}_{\tau,x+1y}+\hat{c}^{\dagger}_{\tau,x+1y}\hat{c}^{\vphantom{\dagger}}_{\tau,xy}\right) \displaystyle+U/t\sum_{xy}\hat{n}_{\uparrow\downarrow,xy}+V/t\sum_{xy}\hat{n}_{xy}\hat{n}_{x+1y}\;\text{,} (37) \displaystyle\hat{H}_{\perp}=-\sum_{xy}\left(\hskip-4.26773pt\vphantom{\hat{c}^{\dagger}_{\tau,xy}\hat{c}^{\vphantom{\dagger}}_{\tau,xy+1}+\hat{c}^{\dagger}_{\tau,xy+1}\hat{c}^{\vphantom{\dagger}}_{\tau,xy}}\right. \displaystyle\left.\hat{c}^{\dagger}_{\tau,xy}\hat{c}^{\vphantom{\dagger}}_{\tau,xy+1}+\hat{c}^{\dagger}_{\tau,xy+1}\hat{c}^{\vphantom{\dagger}}_{\tau,xy}\right)\;\text{,} (38) where c^{(\dagger)}_{xy} are now the fermionic creation and annihilation operators on the respective site and chain, \hat{n}_{\uparrow\downarrow,x,y} counts the number of doublons, and generally {U\gg V>t\gg t_{\perp}} In principle, we can apply the same EE as in Eq. 6 to 37 and 38 and obtain a new supersite Hamiltonian. However, additional care must be taken due to the fermionic nature of the basis spanning the Hilbert space, i.e. we transform Eq. 38 to be \displaystyle\matrixelement{ \bm i^\noprime}{ \qop H_\perp}{ \bm i^\prime} \displaystyle=-\sum_{xy,\tau}\left[\matrixelement{i^\noprime_W\ldots i^\noprime_1}{\qop c^\dagger_{\tau,xy} \qop c^\nodagger_{\tau,xy+1}}{i^\prime_1\ldots i^\prime_W}+\hc\right] (39) \displaystyle=-\sum_{xy,\tau}\left[\prod_{j=1}^{y-1}\left((-1)^{n^{\vphantom{\prime}}_{j}}(-1)^{n^{\prime}_{j}}\delta_{n^{\vphantom{\prime}}_{j}n^{\prime}_{j}}\right)(-1)^{n^{\prime}_{y}}\matrixelement{i^\noprime}{\qop c^\dagger_{\tau,x}}{i^\prime}_{y}\matrixelement{i^\noprime}{\qop c^\nodagger_{\tau,x}}{i^\prime}_{y+1}\prod_{j=y+2}^{W}\delta_{n^{\vphantom{\prime}}_{j}n^{\prime}_{j}}+\hc\right]\;\text{.} (40) Here, i=(n,z,e) again counts the 1D eigenstate basis divided into its subsector through particle number and spin. Furthermore, we recognize the regular Jordan-Wigner transformation of “local” operators where the active site is mediating between the local orbitals and introduces signs. However, now the mediation happens by means of matrix elements of the 1D basis. Apart from that, sites to the right of the active site are identities and sites to the left of it are parity operators counting the total occupation per chain. Squaring the parity gives the identity which effectively makes all the sites left of y trivial. Nevertheless, writing it in this way helps when implementing supersite local operators in code. Thus, creation and annihilation operators read \displaystyle\hat{\gamma}_{y}(\tau,x)^{(\dagger)}=\hat{P}_{1}\otimes \displaystyle\ldots\otimes\hat{P}_{y-1} \displaystyle\otimes\sum_{i^{\vphantom{\prime}}i^{\prime}}\matrixelement{ i^\noprime}{ \qop c^{(\dagger)}_{\tau,x} }{ i^\prime}\outerproduct{ i^\noprime}{ i^\noprime}{i^{\prime}} \displaystyle\otimes\hat{1}_{y+1}\otimes\ldots\otimes\hat{1}_{W} (41) with the parity operator \hat{P}_{y}=(-1)^{\hat{n}_{y}} , which is generalized to the total number-operator {{\hat{n}_{y}}=\sum_{x}{\hat{n}_{x,y}}} for chain y instead of the number of particles on a site. Note that by exploiting symmetries it yields that the only non zero matrix elements are \displaystyle\matrixelement{ n+1,z+\tau,e^\noprime}{ \qop c^\dagger_{\tau,x} }{ n,z,e^\prime} (42) \displaystyle=\matrixelement{ n,z,e^\prime}{ \qop c^\nodagger_{\tau,x} }{ n+1,z+\tau,e^\noprime}^{\ast}\;\text{.} (43) With this definition, the perpendicular Hamiltonian reduces drastically to \displaystyle\hat{H}_{\perp} \displaystyle=-\sum_{xy,\tau}\left[\hat{\gamma}_{y}(\tau,x)^{\dagger}\hat{\gamma}_{y+1}(\tau,x)^{\vphantom{\dagger}}+\hat{\gamma}_{y+1}(\tau,x)^{\dagger}\hat{\gamma}_{y}(\tau,x)^{\vphantom{\dagger}}\right], (44) which we recognize as the hopping between supersites. We now want to investigate L\times W strips again, this time with OBCs in both directions to ease comparison with prior work that was done in the same manner. Due to the known density of itinerant charge in the quasi- 1D Bechgaard and Fabré salts we focus on N=LW/2 [ 2 ] , which means we can use the particle number sectors 0\leq n\leq L for the 1D basis set again. However, technically sectors n>L are also possible, they are just heavily suppressed due to the strong repulsive interactions. This also means we can restrict ourselves to supersite occupation numbers 0\leq n_{y}\leq L , even though, we restrict this number in practice even further, as is discussed in Appendix C . Running a quick EE - DMRG with low bond dimension and evaluating the chain RDM in the centre of the system yields the symmetry sectors and respective number of excitations in Table 1 . The interchain coupling is chosen to be t_{\perp}/t=0.1 , a typical value for the Bechgaard and Fabré salts [ 2 ] . For the electron interactions, we used {U/t=4} , {V/t=1} . While these values are not quite representative for those obtained from actual materials, they allow us to compare to pre-existing data. For the benchmark, we again compare both energies per site and correlation functions to previous results obtained from brute force distributed-memory DMRG calculations at high bond dimension. The comparison of the energy-densities is shown in Fig. 8 . Figure 8: EE groundstate energy of an 20\times W strip of fermions with on-site and nearest neighbour repulsion U=4 and V=1 , respectively. Both directions have OBCs and the system is at quarter filling N=LW/2 . The chains are coupled with t_{\perp}=0.1 . The EE results are obtained with bond dimension m=512 while the multi-node DMRG from [ 62 ] used a bond dimension of m=$18\text{\,}\mathrm{k}$ . The relative difference on the right y -axis ( ) is of the order of a permill. The chains coupled with a bond dimension of m=512 are around a permill higher in energy than those of the brute-force calculations performed with m=$18\text{\,}\mathrm{k}$ . Whether this difference originates from the lower interchain entanglement or the truncated local Hilbert space will be the subject of future work. In any case, further mitigation would demand more RAM to be accessible. Since the hopping in perpendicular direction is weak, the mapping of the 2D system to MPS in [ 62 ] had to be done in the strong-coupling direction in order to achieve convergence. In practice, this leads to a hopping-range of length L for the perpendicular tunneling for each site, necessitating the high bond dimension to converge the system. This makes it very demanding to scale the system in the perpendicular direction using the brute-force approach. In contrast, EE can readily scale in this direction even up to square geometry since the supersite Hamiltonian Eq. 44 is local. As we write those parts of the tensor network to disk which are not involved in the local DMRG optimisation, the influence of the system’s width on memory consumption is constant. We found this to be around 1.8\text{\,}\mathrm{TB} for our maximum bond dimension of m=512 . Regarding the runtime, the scaling is linear as the MPO bond dimension is constant ( \sim$80$ for our benchmark), as we just need to update more supersites. A detailed discussion of the computational requirements can be found in Section D.3 . Energies and other operators with extensively scaling operator norms might be notoriously difficult observables for EE to match up to high numerical accuracy. For the chosen parameters of the 2D U-V Hubbard Hamiltonian, at first glance the energies obtained seem to suggest the system to behave as effectively uncoupled 1D chains. Specifically, the isolated-chain ground state energy from DMRG is \displaystyle E_{\mathrm{1D}}=$-12.022\,406\,40$\;\text{,} (45) while the slope of the EE energy shown in Fig. 8 is \displaystyle E_{\mathrm{EE}}/W=$-12.035\,131\,86$\pm$7.64\text{\times}{10}^{-06}$\;\text{.} (46) To illustrate that we actually probe the 2D regime, we analyse chain-local quantities such as correlators. Concretely, we follow [ 62 ] in defining the nearest neighbour spin-singlet operators \displaystyle\hat{D}_{x,y,a,b} \displaystyle=\hat{c}_{x,y,\uparrow}\hat{c}_{x+a,y+b,\downarrow}-\hat{c}_{x,y,\downarrow}\hat{c}_{x+a,y+b,\uparrow} (47) that connect the two central chains. From these, we build the d_{xy} -correlation function (c.f. Fig. 9 ), as this order has been identified as the most likely instability for these parameters in reference [ 62 ] : Figure 9: Singlets on neighbouring chains are connected by the d_{xy} correlator defined in Section III.3 . \displaystyle d_{xy}(r)=\bra{ \psi}{&\left(\hat{D}_{L/2+1,W/2,-1,1}-\hat{D}_{L/2+1,W/2,1,1}\right)^{\dagger}{\\ }\cdot\left(\hat{D}_{L/2+3+r,W/2,-1,1}-\hat{D}_{L/2+3+r,W/2,1,1}\right)}\ket{ \psi}\;\text{.} In evaluating this correlator in EE we need to multiply out all 16 terms in Section III.3 and obtain operator strings which always consists of two creation and two annihilation operators. The comparison between the EE -calculated result and the brute-force approach is shown in Fig. 10 , for a system with L=20 . Figure 10: d_{xy} -correlator for a 2D U-V Hubbard model with U/t=4 , V/t=1 at quarter filling N=LW/2 , for different numbers of chains W , coupled with t_{\perp}=0.1 . EE -results for chains of length L=20 ( ) are compared to results computed using distributed-memory p DMRG for four or six chains of length L=64 ( ) and L=40 ( ) respectively [ 62 ] . We see excellent agreement of the absolute values of the correlators in comparison to the p DMRG data, in particular given their small amplitudes. The strong enhancement to the short-range correlations of the d_{xy} singlets that is exclusive to W\geq 4 and which was described in [ 62 ] is a mark of the 2D nature of the model at these parameters. The EE -framework reproduces this effect with a small fraction of that computational effort. IV Conclusion The present work introduces a new many-body numerical algorithm for calculating the ground state of correlated 2D systems with spatial anisotropy. It exploits that modern MPS -based numerics can obtain a substantial number of the low-lying many-body eigenstates of the 1D sub-units making up the systems, especially if symmetries are exploited. These states are then used to span the low-energy manifold of the full 2D system, within which a second DMRG algorithm is deployed to obtain the ground state. The EE -approach is thus able to efficiently exploit the spatial anisotropy, provided that the energy-spectrum spanned by the 1D basis sets is at least as wide as the effective coupling mediated by the interactions between the sub-units. Where possible, we validate the algorithm either against QMC numerics (for hardcore bosons on the square lattice), or brute-force calculations carried out with distributed-memory DMRG ( 2D U - V Hubbard model at N/L=0.5 ). We demonstrate that the EE -approach can correctly detect the AFM emerging for localized spins on the anisotropic square lattice, as validated by QMC numerics. We then deploy the EE -framework to spins on the anisotropic triangular lattice, which has been studied intensely for its potential to realize spin liquids. Treating lattices of unprecedented size, we provide evidence for the existence of a gapless quasi- 1D spin liquid in this model at the lowest couplings that we study. At the same time, our data appears to be at variance with earlier predictions that higher-order processes might stabilize an AFM at low coupling, or of a quantum phase transition occurring at intermediate transverse coupling. At present, we are precluded from studying the expected transition to spiral ordered phases by persistent convergence problems in the presence of finite fluxes. We also show the ability of the approach to treat repulsively interacting fermions away from integer filling for large systems that are not confined to narrow strips. Here, we demonstrate that the EE -technique can provide results of comparable quality to those obtained by brute-force approaches, but with far lower resource requirements. At the technical level, the present work invites future studies into the cause for the persistent gaps – in those cases where they can be quantified – between the observables computed from the EE -approach and the true value of the observable, as can be seen e.g. in Fig. 17 . As the size of the 1D basis-set is increased, observables saturate to values that are generally different from their true value. We hypothesize that this persistent gap, which is small at the lower end of the system sizes and inter-chain couplings covered in this work and continuously grows from there, is caused either individually or collectively by the vast manifold of 1D basis states that fall below the user-defined cut-off, as discussed in Section II.3 . While each on their own may contribute only near-infinitesimally to an observable, the object of future work would be to quantify whether and how their exponentially growing number may result in an overall contribution that scales with system size and inter-chain coupling, as we find to be the case. At present, the EE -framework as shown here has to deal with large intermediate memory-requirements. These are caused by the interplay of the contractions when building up the Krylov-subspace vectors in the standard formulation of the DMRG -algorithm, with the large local Hilbert-spaces spanned by the basis sets of the 1D sub-units. For the larger systems for which we demonstrate the EE -approach here, this limits the deployment of the method to large- RAM machines at present. However, as discussed in Appendix D , there would be alternative versions of the DMRG algorithm that could trade an increase in computational time for a drastic decrease of the intermediate memory requirements. Another aspect to be explored in future work would be the extension of the EE -framework to systems at finite temperatures or when evolving out-of-equilibrium. The most common way of deploying MPS -based techniques to finite temperatures, state purification, could be applied by the use of the TDVP -technique for imaginary time evolution, but METTS might also be an attractive possible alternative, given the potentially large local Hilbert spaces of our new method. Of course, computing finite-temperature properties within the EE -approach presupposes that the temperature would be small compared to the spread of energies covered by the 1D basis sets. Analogously, the study of out-of-equilibrium dynamics within the EE -framework would need to focus on processes that evolve slowly enough to be captured within the bandwidth of 1D basis states. Depending on the range of coupling in-between 1D subunits, it could be carried out by running either a TEBD -algorithm for real time evolution (if coupling is strictly nearest-neighbour), or TDVP (if any of the couplings would be longer-ranged). If spectral functions related to perturbing operators \hat{O}_{1,2} were desired, these could be obtained from the Fourier-transform of the matrix element \expectationvalue{ e^{\imagunit E_\mathrm{GS}t} \hat{O}_2 e^{-\imagunit\hat{H}t} \hat{O}_1 }{\psi} , where \hat{H} and \ket{\psi} represent the Hamiltonian and 2D wavefunction, as approximated by the EE -framework, respectively. Spectral functions could also be computed directly in frequency-space using \hat{H} and \ket{\psi} , \expectationvalue{ \hat{O}_2 (\omega+\imagunit\eta-\hat{H})^{-1} \hat{O}_1 }{\psi} as long as \omega is significantly smaller than the spread of energies covered by the 1D -basis \ket{e} [ 82 ] . Finally, another interesting line of future work would lie in comparing the EE -technique against other algorithms that can treat large correlated 2D -systems, but are not tailor-made for the spatially anisotropic regime, such as PEPS and phase-free or constrained-path AFQMC . In this setting, it can be difficult to estimate the degree of approximation induced by these methods and the EE -approach could serve to validate calculations with these alternative algorithms. Acknowledgements. S.M. and A.K. would like to thank Thierry Giamarchi for helpful discussions. This work was supported by an ERC Starting Grant from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 758935; and the UK’s Engineering and Physical Sciences Research Council [EPSRC; grant number EP/W022982/1]. J.M. acknowledges funding through SNSF Swiss Postdoctoral Fellowship, grant no. 210478. The computations were enabled by resources provided through multiple EPSRC “Access to HPC” calls (Spring 2023, Autumn 2023, Spring 2024 and Autumn 2024) on the ARCHER2, Peta4-Skylake and Cirrus compute clusters, as well as by compute time awarded by the National Academic Infrastructure for Supercomputing in Sweden (NAISS). This work was supported by a grant from the Swiss National Supercomputing Centre (CSCS) under project ID s1307 on Alps. S.M. gratefully acknowledges the computing time provided on the high-performance computers noctua2 at the NHR Center PC2 in Paderborn. These are funded by the Federal Ministry of Education and Research and the state governments participating on the basis of the resolutions of the GWK for the national highperformance computing at universities. All calculations were carried out with the publicly available containers of the SyTen toolkit [ 83 ] . N.L. acknowledges the ANR research grant ManyBodyNet No. ANR-24-CE30- 5851, the support of the Fondation Simone et Cino Del Duca, and the use of HPC resources from CALMIP (grants 2023-P0677) and GENCI (project A0150500225). Appendix A EE - DMRG finite bond dimension error The error arising from finite bond dimension can be estimated used the truncated weight w , i.e. the sum of discarded singular values s_{i} \displaystyle w=\sum_{i=m+1}^{M}s^{2}_{i}\;\text{,} (48) where m is the number of states kept and M is the bond dimension before truncation. Often the truncated weight for the investigated model is constant for different parameter settings and therefore mentioned in the main text. For the systems discussed in Section III.2 it depends on the lattice geometry and coupling and therefore is displayed in Fig. 11 . Figure 11: Truncated weights for the final sweep of the different system sizes and intrachain couplings J_{\perp} in Section III.2 . Appendix B Single chain excitation probabilities In order to estimate the importance of a particular chain energy mode within the 2D system, we plot the single chain excitation probability \displaystyle\hat{\rho}_{y} \displaystyle=\tr_{y^{\prime}\neq y^{\vphantom{\prime}}}\outerproduct{ \psi}{ \psi}{\psi}\;\text{.} (49) We trace out everything except for the respective chain’s energy eigenmodes. The diagonal elements of this matrix give us the excitation probability for the respective mode which can be seen in Fig. 12 together with the 1D energy bandwidth. Figure 12: Energy bandwidth of the 1D basis states and excitation probability in the center of the EE wavefunction for the system described in 28 and 33 . All data shown here is for chains of length L=16 and in the center of a W=16 supersites system with J_{\perp}=0.1 and the local basis configuration described in Eq. 25 . Changing the lattice geometry from square to triangular introduces frustration so efficient that the chains transition from a weakly coupled system to one of nearly independent chains, i.e. a product wavefunction of the 1D ground states. Appendix C Fermionic 1D basis Due to the fact that fermions have spin degeneracy for each particle number sector, we need to give a vector of 1D energy eigenstates kept in EE for each of those sectors. This scheme is depicted in Table 1 . particle number n spin \absolutevalue{z} 1D states L/2-3 1/2 e=0 L/2-2 \leq 2 0\leq e\leq 9 L/2-1 5/2 e=0 \leq 3/2 0\leq e\leq 15 L/2 3 e=0 \leq 2 0\leq e\leq 19 0 0\leq e\leq 31 L/2+1 7/2,\ 5/2 e=0 \leq 3/2 0\leq e\leq 15 L/2+2 4,\ 3 e=0 \leq 2 0\leq e\leq 9 L/2+3 3/2\leq\absolutevalue{z}\leq 9/2 e=0 1/2 0\leq e\leq 5 Table 1: Single chain sectors incorporated in fermionic wavefunctions and their associated number of excitations. Note that some of the sectors might not be necessary as judged by the RDM , but still need to be included due to the creator (or annihilator) mapping from a state which has high enough weight to this low weight state. In this case, we added the ground state of this sector such that the block has size one and the irreducible representation is present in the wavefunction. Appendix D Key algorithmic steps D.1 1D eigensystem We obtain the 1D eigenbasis of the chain by using conventional DMRG [ 38 ] . DMRG has proven its utility and accuracy in efficiently computing eigenstates of 1D systems at high accuracy. Its performance stems from the small entanglement entropy of low-energy states scaling only very weakly with subsystem size in general. Once the ground state of the system \ket{e = 0} is found, we can compute low-lying excitations by minimising the energy in DMRG with the additional constraint of orthogonality to all previously computed states [ 38 ] . \displaystyle\min_{\ket{e}}\left[\expectationvalue{ \qop h }{e}-E_{e}\innerproduct{e}{e}-\sum_{e^{\prime}=0}^{e^{\vphantom{\prime}}}\lambda_{e^{\prime}}\innerproduct{ e^\prime}{ e^\prime}{e^{\vphantom{\prime}}}\right]\;\text{.} (50) Algorithmically, this consists in keeping the states against which the current excitation should be orthogonalised in the usual canonical form and computing their overlaps with the MPS site tensor in the local diagonalization step of DMRG . This part of the algorithm is shown in Fig. 13 . Figure 13: Schematic depiction of the orthogonalization procedure to obtain the low lying excitations of the 1D Hamiltonian \hat{H}_{1} . Note that we can perform this scheme for each symmetry sector separately and thus in parallel. Depending on the boundary conditions, the exact geometry of the 1D lattice, the Hamiltonian parameters and the exchange statistics of the particles, the typical bond dimension for convergence of such a state can range from m\sim\mathcal{O}\left($100$\mathinner{{\ldotp}{\ldotp}}$1000$\right) . The typical MPS size on disk then reaches from below 1\text{\,}\mathrm{MB} to several hundreds. The calculation itself uses \mathrm{O}\left($10\text{\,}\mathrm{GB}$\right) of RAM and takes between minutes and hours. Since all lower-lying excitations are necessary to compute an excited state, there is no room for parallelisation. However, in addition to the usual parallelisation over tensor blocks we can search in the different quantum number sectors in parallel, as described in Section II.1 . D.2 Matrix elements Once we have obtained a sufficient amount of 1D energy eigenstates to describe our system accurately, we need to extract the necessary matrix elements for the transformation of Eq. 1 into the 1D energy eigenbasis. For each state \ket{e,\sigma} labelled by its sector \sigma and excitation number within that sector e , we need to compute the overlap with all the other states \{\ket{e^\prime,\sigma+T}\}_{e^{\prime}} . Here, T is the transformation behaviour of the operator - the change in quantum number(s) that applying it induces - that we are measuring and the target sector is \sigma+T . The whole scheme is depicted in Fig. 14 . Figure 14: Computing the matrix elements for the local operators needed in EE , typically c^{(\dagger)}_{x} and n_{x} . For each operator and each eigenstate computed in 1D we need to compute the overlap with all eigenstates in the sector which we obtain by combining the original sector and the transformation behaviour of the operator at hand. Note that we can do this in parallel for all states and all operators. The typical size of these matrices is \mathrm{O}\left(10\right)\times\mathrm{O}\left(10\right) , i.e. the computational cost is negligible. The overlap performance on two MPSs typically needs less than 10\text{\,}\mathrm{GB} of RAM and under one minute. Again, we have the advantage that we can parallelize the computation over tensor blocks and, in addition to that, by computing all matrix elements in parallel since we do not have to wait for lower lying elements in the spectrum to finish. D.3 EE - DMRG Here, we describe the most costly computational step of the algorithm. Since our Hamiltonian represents each chain as a large effective supersite, the typical bond dimension of \hat{H}_{\perp} is rather modest. However, the MPO bond dimension does scale with the length of the chains L , as the summation contains an element for each site x . We typically found a bond dimension \mathcal{O}(10) for the systems investigated in this work ranging from \sim 30 for bosons on the square lattice to \sim 80 for spins on triangular lattices and the fermionic systems we looked at. Together with the bond dimension accessible to EE in two-site DMRG , this typically resulted in sizes of the left- and right-environments being \mathcal{O}($100\text{\,}\mathrm{MB}$) . Furthermore, the MPS tensors themselves would have a size of the order \mathcal{O}($10\text{\,}\mathrm{MB}$\mathinner{{\ldotp}{\ldotp}}$50\text{\,}\mathrm{MB}$) . We define the filling fraction of a tensor as the ratio between the amount of memory needed when the tensor is symmetry protected [ 74 ] against the hypothetical total amount of memory necessary would one want to store the object without blocks. This yields a filling fraction of \sim$17\text{\,}\mathrm{\%}$ for the MPS site tensors. Using the same filling fraction to compute the size of the objects computed in Fig. 15 , we arrive at around 500\text{\,}\mathrm{GB} just to store the partial contractions in RAM . We note that the filling fraction is usually not a constant throughout a tensor network and hence the objects might actually be larger. However, the magnitude matches the memory consumption experienced by us during simulations. Upon multiplication of the site tensor into the left boundary the memory requirement for performing the further multiplications of a state with bond dimension m=256 jumps to 2\text{\,}\mathrm{TB} . (a) Applying the active two-site tensor to the left environment. This step greatly increases memory usage due to two open legs with large local Hilbert space \tilde{d} size and an additional free MPO leg. (b) Applying the MPO site tensors to the composite object. This step still involves the high RAM requirement as the number of open legs remains the same and we contract with objects scaling as \tilde{d} and the MPO bond dimension. (c) Finally, this step gives us the updated MPS tensor and the memory requirement again drops to the well controllable amounts described in the main text. Figure 15: Key algorithmic steps of the local two-site update in EE - DMRG . With the highest- RAM machines available to us, we were able to perform this calculation, as we cache the other elements of the tensor network not needed for the local update to disk. There are two potential remedies for the high- RAM requirements. We outline these here, but pursuing them in detail would constitute a separate project. The first is the use of single-site DMRG instead of two-site optimisation [ 84 ] . The advantage of the single-site approach is that it requires only a single index running over the 1D basis states, of size \tilde{d} , during the optimization approach in Fig. 15 , instead of the two indices, each of size \tilde{d} , for two-site DMRG . For instance, a test calculation performed on the system in Section III.2 yielded a decreased RAM consumption by a factor of ten while keeping the bond dimension constant. Given that we use \tilde{d}=264 single-chain basis states in production, this is an appropriate improvement. In order to improve accuracy, we then increase bond dimension within the single-site DMRG algorithm up to m=1024 , where our original RAM restriction of 2\text{\,}\mathrm{TB} kicks in. However, systems with weak interchain coupling would often converge around bond dimensions of about m=500 and not saturate the available number of states, in particular for J_{\perp}<0.5 . The improved performance of single-site DMRG , however, entails potential problems regarding the convergence of the wavefunction. Usually, single site DMRG can run into convergence problems due to the limited size of the local variational Hilbert space available during the application. Algorithms exist that attempt to mitigate this by mixing the optimised state tensor with additional data, such that the algorithm might be able to explore a larger variational manifold [ 84 ] . The truncation then automatically takes care of unnecessary degrees of freedom. However, there is no guarantee for the expansion data to actually contain the necessary states for the MPS to reach a true minimum in the energy optimisation landscape. Running these codes thus entails a case by case decision on whether single-site DMRG has found a state that converged equally well or even better than the one found by two-site DMRG with fewer resources, or whether one might be stuck in a metastable state. Within the EE -framework as deployed in the present work, there is the advantage that all supersite “interactions” are either local or at most nearest-neighbour. Hence, the single-site DMRG might not be obstructed by long range interactions, which is a fairly common problem for this algorithm. For the triangular test systems the difference between single-site and two-site energies would be around {10}^{-2}\text{\,}\mathrm{\text{\textperthousand}} , with the single site DMRG being lower in energy. Key observables, e.g. the correlators in Fig. 5 , would take exactly the same shape. This overlap between both results indicates the correctness of our results obtained with finite bond dimension. However, employing single-site DMRG for data production, we would consider additional checks to be necessary that will be the target for future work. The second possible mitigation to the resource problem might be introducing an additional step during the two-site update, which is shown in Fig. 15 for reference. If we want to avoid the occurrence of objects with two supersite indices, each having a local dimension of \tilde{d} , we could compute the contraction of the left environment, the left MPS and the left local MPO tensor separately from the analogous contractions for the right-sided objects. The updated two-site tensor would then be computed from contracting the left-side and the right-side network. Furthermore, left-side and right-side network would need to be kept separate consistently as the Krylov-subspace is being build up by subsequent applications of the Hamiltonian. This necessitates application of a QR decomposition for every two-site tensor (i.e. after every application of the Hamiltonian). By doing so, the memory cost would stay comparable to that of single-site DMRG , but at the cost of additional QRs at every update step. Trading memory for compute time in this fashion would allow keeping the large variational Hilbert space of the two-site procedure and hence avoid potential local minima. Based on pilot results, we currently estimate a runtime that would be four to five times longer than thhat of the standard algorithm used in the present work. Appendix E Energy eigenstate observable overlaps As discussed in Section II.2 , observables computed with EE wavefunctions are summations over the 1D matrix elements of \hat{H}_{1} weighted by the RDM of the corresponding chain supersite Hilbert spaces. Here, we want to demonstrate the spatial behaviour of these matrix elements. For instance, in order to compute the single-particle density matrix of the system described in Section III.1 , we must expand \displaystyle\matrixelement{ \psi}{ \qop b^\dagger_ { x^\noprime c } \qop b^\nodagger_ { x^\prime c } }{ \psi} \displaystyle=\sum_{n_{y}e^{\vphantom{\prime}}_{y}e^{\prime}_{y}}\rho^{n_{y}e^{\prime}_{y}}_{n_{y}e^{\vphantom{\prime}}_{y}}\matrixelement{ n e^\noprime}{ \qop b^\dagger_{x^\noprime} \qop b^\nodagger_{x^\prime} }{ n e^\prime}_{c}\;\text{,} (51) where we introduced the single chain RDM \displaystyle\rho^{n_{y}e^{\prime}_{y}}_{n_{y}e^{\vphantom{\prime}}_{y}} \displaystyle=M^{n_{y}e^{\vphantom{\prime}}_{y}\dagger}\cdot M^{n_{y}e^{\prime}_{y}} (52) and c=W/2 again. We are now particularly interested in the 1D matrix elements of different eigenstates \ket{e^\noprime} and \ket{e^\prime} of \hat{H}_{1} . In the case of e^{\vphantom{\prime}}\neq e^{\prime} these are not observables themselves but their scaling is crucial for the EE to be able to capture 2D physics such as off-diagonal long range order correctly. The results for the system of size L=16 at half filling N=8 and chain nearest neighbour repulsion V=2 are shown in Fig. 16 . Figure 16: 1D single particle correlation functions for N=8 HCBs on a L=16 chain with V=2 . The excited states with which the correlator was computed were manually picked to show functions which would not decay towards zero and hence could mimic the true 2D behaviour in the weighted sum Eq. 51 . Appendix F Observable scaling with supersite size The number of 1D states incorporated into the local supersite is crucial for the convergence of many observables and the quantum state \ket{\psi} itself. Here we want to demonstrate the impact that different values of the dimension \tilde{d} of the retained single-chain Hilbert space can have on the square-lattice spin system discussed in Section III.2 . As QMC does not suffer from the sign problem for this model, we can validate convergence of the EE framework against data that is exact for all practical purposes. The definition of the perpendicular spin-spin correlator is given in Eqs. 31 and 32 . We emphasize that \tilde{d} does not uniquely specify a basis, as one 1D state removed from one sector while another one is being added to another sector will not change the value of \tilde{d} . (a) (b) Figure 17: Relative error of perpendicular correlation length defined in Eq. 32 for the square lattice ( \square ) spin system defined in 28 compared to exact QMC . The right y -axis shows the distance of the quantum states relative to the state with the largest local basis using dotted lines ( ). In addition, we introduce the distance of two states \ket{\psi} and |\tilde{\psi}\rangle as \displaystyle f(\ket{\psi},|\tilde{\psi}\rangle) \displaystyle=\norm{ \ket\psi- |\tilde\psi\rangle}^{2}_{2}\;\text{,} (53) as a measure how much a state with large supersite Hilbert space \ket{\psi} is varying from a state with a smaller supersite Hilbert space. The relative error of the results compared to exact QMC data is shown in Fig. 17 for the anisotropic Heisenberg Hamiltonian on the square lattice (c.f. Section III.2 ). All results were obtained for a final bond dimension of m=256 to maintain comparability, even though the smaller Hilbert space sizes can be computed with higher bond dimension. We clearly recognize the distance to be a monotonically decreasing function in \tilde{d} while the same does not hold for the correlation length \xi_{\perp} . This is most likely due to higher bond dimension necessary to resolve correlations when more chain eigenstates are involved in the process. Appendix G Spin to hardcore boson mapping Starting from Eq. 27 and identifying spin down with an empty and spin up with an occupied site we arrive at the hardcore boson Hamiltonians \displaystyle 2H_{1}=\sum_{xy}\left(\hat{b}^{\dagger}_{x,y}\hat{b}^{\vphantom{\dagger}}_{x+1,y}+\hat{b}^{\dagger}_{x+1,y}\hat{b}^{\vphantom{\dagger}}_{x,y}\right) \displaystyle+2/t\sum_{xy}\hat{n}_{x,y}\hat{n}_{x+1,y}+\const\;\text{,} (54) \displaystyle 2H_{\perp}=\sum_{xy}\left(\hat{b}^{\dagger}_{x,y}\hat{b}^{\vphantom{\dagger}}_{x,y+1}+\hat{b}^{\dagger}_{x,y+1}\hat{b}^{\vphantom{\dagger}}_{x,y}\right) \displaystyle+2/t\sum_{xy}\hat{n}_{x,y}\hat{n}_{x,y+1}+\const\;\text{,} (55) \displaystyle 2H^{\prime}_{\perp}=\sum_{xy}\left(\hat{b}^{\dagger}_{x,y}\hat{b}^{\vphantom{\dagger}}_{x+1,y+1}+\hat{b}^{\dagger}_{x+1,y+1}\hat{b}^{\vphantom{\dagger}}_{x,y}\right) \displaystyle+2/t\sum_{xy}\hat{n}_{x,y}\hat{n}_{x+1,y+1}+\const\;\text{,} (56) where we introduced the ordinary creation and annihilation operators as well as the particle number operator. This means the two models are essentially the same with the identifications \displaystyle t=J\;\text{,}\qquad V=2J\;\text{,}\qquad t_{\perp}=J_{\perp}\;\text{,}\qquad V_{\perp}=2J_{\perp}\;\text{.} (57) It is worthwhile pointing out that the sign of the HCB kinetic energy is positive now in all three 54 , 55 and 56 which shifts the energy minimum of the single particle dispersion from zero momentum to {(\pi/a,\pi/a)} .