Sat-DN: Implicit Surface Reconstruction from Multi-View Satellite Images with Depth and Normal Supervision Tianle Liu, Shuangming Zhao, Wanshou Jiang, Bingxuan Guo Abstract With the advancement of satellite imaging technology, acquiring high-resolution multi-view satellite imagery has become increasingly accessible, enabling efficient and location-independent ground model reconstruction. However, traditional stereo matching methods often miss fine details, while neural radiance fields (NeRFs) provide high-quality reconstructions at the cost of prohibitively long training times. Moreover, challenges such as low visibility of building facades, illumination inconsistencies, and weakly textured regions further hinder accurate geometry recovery. To tackle these issues, we propose Sat-DN , a novel depth- and normal-guided surface reconstruction framework for satellite imagery. Given multi-view satellite images and predicted depth maps, Sat-DN employs a progressively trained multi-resolution hash grid architecture to efficiently represent scene geometry. Our pipeline integrates explicit depth supervision and surface normal consistency constraints to preserve structural boundaries and planar regularities. The progressive training strategy first fits low-frequency geometric structures and then refines high-frequency details under the guidance of depth and normals. Extensive experiments on the DFC2019 dataset demonstrate that Sat-DN significantly outperforms traditional MVS and NeRF-based baselines in both accuracy and efficiency. The code is publicly available at https://github.com/costune/SatDN . I Introduction Reconstructing three-dimensional surfaces from satellite images present significant challenges in the field of remote sensing and computer vision [ 1 ] . Using the wide coverage and high resolution of satellite images, a rapid large-scale reconstruction of regions can be achieved, which plays a crucial role in urban planning and digital twin applications [ 2 , 3 , 4 , 5 ] . In recent years, approaches leveraging neural radiance fields (NeRFs) [ 6 , 7 ] have demonstrated promising results in synthesizing photorealistic views of complex scenes. Neural radiance fields encode a scene as an implicit neural field and utilize differentiable volume rendering [ 6 ] techniques to render the field into images. Compared with multi-view ground truth images, it can optimize the density and radiation distribution of the scene through gradient propagation. However, directly applying NeRFs to satellite images is not a trivial thing. High-resolution satellite images in high dynamic range (HDR) are described by the Rational Polynomial Coefficients (RPC), which differ from the ordinary intrinsic and extrinsic coefficients determined images. In addition, limited perspectives, huge illumination variances, and extensive weakly textured regions hinder the achievement of better reconstruction results. Fig. 1: The effects of our proposed depth and normal supervision. We utilize multi-view satellite imagery combined with explicit depth and surface normal consistency supervision to reconstruct detailed surface models of the terrain. To address these issues, some previous works have already achieved remarkable results [ 4 , 8 , 5 , 9 , 10 ] . The common NeRFs pipeline is tailored for images defined by intrinsic and extrinsic parameters. Zhang et al. [ 4 ] samples sparse points by the RPC model and optimizes the satellite image camera parameters through bundle adjustment with COLMAP [ 11 ] , which bridges the gap between the RPC model and matrix parameters. However, the translation matrix obtained has a relatively large eigenvalue, which can lead to numerical instability in computations, and the camera matrix representation is not suitable for subsequent evaluations. S-NeRF [ 8 ] is the first attempt to construct neural radiance fields using satellite data. It achieves spatial point sampling through ground elevation and introduces an additional multilayer perceptron (MLP) to predict satellite shadows, rather than explicitly decomposing the lighting and geometry. Sat-NeRF [ 5 ] introduces an uncertainty module to address inconsistencies caused by dynamic vehicles. It also samples Rational Polynomial Coefficients to model the ray projection process, enabling the construction of an RPC-based neural radiance field. However, multiple queries of the MLP structure result in significant computational overhead. FVMD-ISRe [ 10 ] et al. integrates the RPC ray projection process into NeuS [ 12 ] , enabling fine reconstruction with few number of views. However, the method relies on manually selecting reconstruction perspectives and cannot address the issue of missing views around the terrain. In this paper, we aim to develop a method for end-to-end surface reconstruction, mitigating the impact of satellite image characteristics on reconstruction quality and overcoming the limitations of existing methods. The challenges in surface reconstruction from satellite images include: First , the color of pixels on different images corresponding to the same spatial location differ significantly, and the reflection intensity varies dramatically between areas on one image. Due to the limitations of satellite imaging technology, multi-view images of a single geographic location require multiple satellite passes to capture, resulting in multi-temporal characteristics among images from one set. Because of the sunlight angle, the building rooftop areas experience strong reflective glare, causing overexposure in the color transitions of these regions. The inconsistency in lighting and shading causes unstable optimization, which leads to geometric inaccuracy [ 13 , 14 , 15 ] . Second , satellite images contain extensive repeated textures and weakly textured regions, which result in the reconstructed surface being insufficiently smooth, and the normals lacking global consistency. This leads to irregular fluctuations of the plane [ 12 , 16 , 17 ] , resulting in a reduction of reconstruction results. Third , Due to the limited number of satellite image viewpoints and constrained tilt angles, occlusion often occurs in the images of the reconstruction areas, and visibility of information such as building facades is reduced. This can lead to errors in reconstructing complex building geometries and cause the model to produce holes [ 18 , 19 ] . We address these problems one by one. First , we propose to leverage monocular depth cues from a pre-trained depth estimation model [ 20 ] as an optimization constraint. We adjust the scale and offset of monocular relative depth using a point cloud refined by triangulation and bundle adjustment. Due to the smoothness of the predicted depth values, the disturbance of the illumination variation in the images on the depth values is minimal. We can use adjusted depth information to guide geometry, avoiding ambiguities in photometric optimization. Second , we fuse depth values to obtain monocular normal information and derive angular similarity from the normals. Non-edge pixels are treated as planar surfaces, and we apply a surface normal consistency constraint to guide the smooth distribution of normals, which helps achieve better results in large planar areas such as rooftops and roads. Third , considering the smoothness inherent attribute of interpolation, we introduce a multi-res hash feature grid [ 21 ] to store and optimize scene features, effectively reducing inference time. Additionally, we employ a progressive training strategy to prevent holes and indentations when reconstructing building facades. In summary, we present a new surface reconstruction pipeline from satellite images, called Sat-DN , coupled with the multi-res hash feature [ 21 ] grid and neural surface reconstruction [ 12 ] using explicit monocular cues guidance. We evaluate our pipeline on the widely-used DFC2019 [ 22 ] dataset. The efficiency is shown in Fig. 1 . Quantitative and qualitative experiments indicate that our method outperforms other surface reconstruction methods in the accuracy of reconstructed mesh and digital surface model (DSM). Our contributions are included as follows: 1. We introduce monocular depth supervision and surface normal consistency supervision into satellite image surface reconstruction to mitigate the impact of lighting differences and weak or repeated textures on reconstruction accuracy. 2. We integrate the multi-res hash feature grid into the pipeline to accelerate the training. A progressive coarse-to-fine training strategy is also introduced to prevent the occurrence of holes and indentations in the reconstructed model. 3. By conducting experiments on Jacksonville and Omaha from the DFC2019 [ 22 ] dataset, Sat-DN outperforms the SOTA methods, demonstrating the effectiveness of our proposed method. The subsequent part of the paper is structured as follows. Section II reviews the 3D reconstruction of satellite images and neural implicit representations. Section III details the preliminaries utilized in the proposed method. Section IV provides a comprehensive explanation of the structure and methodology adopted in Sat-DN. Section V presents the results of Sat-DN on the dataset and comparisons with other state-of-the-art (SOTA) methods. In section VII , we conclude the proposed method. II Related Works In this section, we review traditional 3D reconstruction methods from satellite images relevant to our research and emerging methods that leverage volume rendering for reconstruction. II-A 3D Reconstruction Using Satellite Images Reconstructing 3D surface models from satellite images has been a longstanding challenge [ 23 , 2 , 24 , 25 , 26 ] . Traditional reconstruction pipelines, mainly dominated by stereo matching, focus on pair-view reconstruction, consisting of four steps: stereo rectification, stereo matching, triangulation, and multi-view DSM fusion [ 1 ] . Stereo matching or disparity estimation is the process of finding the pixels in the different views that correspond to the same 3D point in the scene [ 27 ] . As a representative of global stereo matching (GSM), Kolmogorov and Zabih [ 28 ] introduced an energy minimization formulation of the correspondence problem with occlusions and a fast graph-cut-based approximation algorithm. However, GSM is not suitable for processing large-scale satellite images uniformly, which brings considerable computation burden. Semi-global stereo matching (SGM) [ 29 , 30 ] uses an efficient one-dimensional path aggregation method to compute the minimum of the energy function, replacing the two-dimensional minimization algorithm used in GSM. Furthermore, the variations of SGM further improved accuracy and efficiency, such as MGM [ 31 ] , SGBM [ 32 ] . Ghuffar [ 33 ] applied the SGM to generate DSM from satellite image space and georeferenced voxel space avoiding stereo rectification and triangulation. Dumas et al. [ 34 ] combined semantic segmentation with SGM, using semantic guidance for pixels to stop matching paths at semantic boundaries, effectively optimizing the disparity transition between buildings and other areas. Yang et al. [ 35 ] proposed semi-global and block matching, using adaptive block matching instead of the dense matching strategy. Barnes et al. [ 36 ] proposed the PatchMatch method, which created a support window for every pixel in the reference image and used the slide window method to calculate the matching cost. He et al. [ 37 ] introduced a multi-support-patches extraction block to extract multispectral central-surround information. Bleyer et al. [ 38 ] improved the fronto-parallel window to slanted support window, which extended the matching accuracy to the sub-pixel level. Notably, S2P [ 39 , 40 , 41 ] plays an important role in satellite image matching as a classical method. It approximated satellite images using a pinhole camera model, allowing the application of traditional reconstruction pipelines. Modern deep learning methods have brought stereo matching into a new stage. PSMNet [ 42 ] used spatial pyramid pooling and 3D CNN to aggregate context and regularize cost volume. Yang et al. [ 43 ] proposed a hierarchical stereo matching architecture to achieve high-res matching through a coarse-to-fine strategy. HMSM-Net [ 44 ] utilized an end-to-end disparity learning model using low-level spatial features to guide the cost volume fusion of high-level features, and achieved good results in occluded and repeated areas. Sat-MVSF [ 26 ] proposed a uniform framework for multi-view stereo (MVS) including pre-processing, an MVS network, and post-processing, which can generalize in different images. Although traditional stereo matching reconstruction methods are well-established, they still involve complex workflows and require extensive manual intervention. Additionally, factors like lighting, style, and other image parameters continue to hinder the reconstruction quality of traditional approaches. These methods often rely on stereo image pairs to recover DSM and suffer from insufficient geometric accuracy. Multi-view information should be considered to achieve finer model representations. II-B Neural Implicit Representations Neural implicit representations have garnered significant attention in recent years for 3D space representation and reconstruction [ 6 ] . The core idea of this approach is to use neural networks as continuous functions, embedding geometric and appearance information implicitly into a high-dimensional representation space. Compared to traditional discrete grid-based 3D representations, implicit representations can continuously describe scenes, offering fine details in higher resolution. In novel view synthesis, NeRF [ 6 ] has demonstrated impressive results by introducing positional encoding, which maps three-dimensional space into the frequency domain, enhancing spatial representation capabilities. Mip-NeRF [ 7 ] further employed integrated positional encoding and modelling the frequency domain projection of a spatial Gaussian distribution at the sampling positions through the view frustum that intersects the pixels. This enhancement increases the sensitivity to depth and minimises distortion. NeRF++ [ 45 ] models the scene as a unit sphere and applies inverted sphere parameterization to coordinates outside the unit sphere. NeRF-W [ 13 ] introduced feature vectors into the MLP to learn the colour styles of training images and incorporates weighting information, with a focus on learning static objects. URF [ 14 ] introduced learnable scene exposure vectors and computes the final synthesized color based on affine transformations. To accelerate training, [ 46 , 21 , 47 ] introduces a voxel-grid hybrid structure to explicitly represent 3D information, and the features of sampled points are obtained through interpolation. However, the volumetric density in the radiance field cannot be perfectly aligned with the surface, making it challenging to accurately represent geometry. In 3D reconstruction, surface rendering methods such as IDR [ 48 ] and DVR [ 49 ] define radiance directly on the surface and use implicit gradients for rendering. However, these approaches require input pixel-aligned masks. Volume rendering methods like [ 50 , 51 , 12 ] , directly using the photometric as supervision, can reconstruct accurate geometry. UNISURF [ 50 ] derived surface positions of objects based on the zero-level set of SDF, generating realistic views by rendering colors and normals of points intersecting rays with the surface. VolSDF [ 51 ] assumed maximum volumetric density at the surface, linking volumetric density and SDF values and using an approximation method for sampling. NeuS [ 12 ] addressed the offset issue in the conversion between volumetric density and SDF, proposing an unbiased transformation function that aligns volumetric density at its maximum with the surface. Sun et al. [ 52 ] proposed a hybrid voxel representation and surface-guided sampling strategy, accurately reconstructing geometry by constraining the sampling range. NeuS2 [ 17 ] combines NGP [ 21 ] with NeuS to achieve geometric reconstruction of dynamic human bodies. Neuralangelo [ 53 ] improves the issue of local interpolation grids lacking global smoothness by using numerical gradients to compute higher-order interpolation derivatives. Moreover, Voxurf [ 54 ] proposed a voxel-based 3D surface reconstruction method, acquiring a faster convergence speed than the pure MLP and hybrid representation methods. There have already been some attempts to use satellite imagery as training input. S-NeRF [ 18 ] incorporated the direction of sunlight into the MLP, aiming to decompose surface albedo and ambient light to reconstruct the true color. Sat-NeRF [ 5 ] focused on the uncertainty of dynamic objects in the scene, reducing the view synthesis artifacts caused by these dynamic objects. EO-NeRF [ 9 ] leveraged shadow information for geometric inference, ensuring that the shadows cast by buildings align with the scene’s geometry. SUNDIAL [ 55 ] precisely estimated lighting through secondary shadow ray transmission and introduced geometric regularization to optimize scene geometry jointly. During training, it simultaneously estimates the sun’s direction to enhance the accuracy and robustness of decomposing the scene’s physical properties. Sat-Mesh [ 56 ] leveraged photo consistency constraints to ensure that the textures in synthesized views are consistent with those at the same locations in the training images. This aids the model in learning accurate and plausible geometry. Sat-NGP [ 57 ] was the first to apply hash grids to satellite image reconstruction, but it was limited to novel view synthesis and DSM generation, unable to reconstruct complete surface models. Although the methods mentioned above consider lighting, the limited number and constrained angles of view make reconstructing complex scenes a significant challenge. By directly constraining the geometry, we can achieve better reconstruction results. Thus, we introduce new regularization terms to enhance the reconstruction result. III Preliminary III-A NeRF and NeuS Neural radiance fields [ 6 ] map each 3D position \mathbf{x}=(x,y,z)\in\mathbb{R}^{3} and viewing direction \mathbf{d}=(\theta,\phi)\in\mathbb{R}^{2} to the volumetric density \sigma\in\mathbb{R}_{+} at that location and the RGB color value \mathbf{c}\in\mathbb{R}^{3} emitted from it along the viewing direction to the ray’s origin. The color of a ray \mathbf{r} emitted from the origin \mathbf{o} in the viewing direction \mathbf{d} is synthesized through volume rendering by compositing the volumetric density \sigma_{i} and color \mathbf{c}_{i} of sampled points \mathbf{x}_{i}=\mathbf{o}+t_{i}\mathbf{d} along the ray according to quadrature rule [ 58 ] : C(\mathbf{r})=\sum_{i=1}^{N}T_{i}\alpha_{i}\mathbf{c}_{i},\ \ \ T_{i}=\prod_{j=1}^{i-1}\left(1-\alpha_{i}\right), (1) where T_{i} and \alpha_{i} denote accumulated transmittance and alpha value of position i . The alpha value \alpha_{i}=1-e^{-\sigma_{i}\delta_{i}} and \delta_{i}=t_{i+1}-t_{i} is the distance between adjacent positions. NeRFs [ 6 ] overfit 3D scene information from multi-view images and store the information (\mathbf{c},\sigma)=f_{\theta}(\mathbf{x},\mathbf{d}) in an MLP. The neural network is optimized by comparing the differences between rendered and ground truth images. NeuS [ 12 ] connects the signed distance function (SDF) with the neural radiance field through an SDF f(\mathbf{x}) to opaque density \rho(\mathbf{x}) transfer function to align the surface with the location where the volumetric density reaches its maximum along a ray. NeuS [ 12 ] defined the function as: \alpha_{i}=\max\left(\frac{\Phi_{s}(f(\mathbf{x}_{i}))-\Phi_{s}(f(\mathbf{x}_{i+1}))}{\Phi_{s}(f(\mathbf{x}_{i}))},0\right), (2) where \Phi_{s}(x) denotes the Sigmoid function \Phi_{s}(x)=(1+\exp(-sx))^{-1} with bandwidth s . With the intrinsic characteristic of occlusion awareness in volume rendering, the photometric constraint adjusts the zero-level set of SDF to coincide with the scene surface accurately. The total loss is: \begin{split}\mathcal{L}&=\mathcal{L}_{color}+\lambda\mathcal{L}_{eikonal}\\ &=\frac{1}{m}\sum_{k}|C_{k}-\hat{C}_{k}|+\frac{\lambda}{mn}\sum_{k,i}(||\nabla f(\mathbf{(}\mathbf{x}_{k,i})||_{2}-1)^{2},\end{split} (3) where C_{k} and \hat{C}_{k} denote the ground-truth color and rendered color, m and n represent the number of rays and points in each ray, and the \mathcal{L}_{eikonal} term is to regularize the SDF distribution. III-B Hash Feature Grid Since NeRFs [ 6 ] use MLPs to encode scene information, multiple MLP queries result in substantial computational overhead, with scene reconstruction training times reaching up to 8-10 hours. Müller et al. proposed Instant-NGP [ 21 ] , which encodes the scene into a multi-res hash grid. The features of a sampled position are concatenated by interpolations of multi-res grid vertex features where the point resides. Specifically, for every sampled point \mathbf{x}\in\mathbb{R}^{3} , the feature h_{i}(\mathbf{x})\in\mathbb{R}^{d} at each grid level i is interpolated by the learnable vertex features that looked up in the hash table. After stacking L different levels’ features, the overall mapped feature \mathbf{h}(\mathbf{x})=\{h_{1}(\mathbf{x}),h_{2}(\mathbf{x}),...,h_{L}(\mathbf{x})\}\in\mathcal{R}^{L\times d} inputs to a tiny MLP to fit SDF value. Because of the implementation of CUDA, the whole process can be computed swiftly without sacrificing geometry and appearance. IV Method Given a set of satellite images \{I_{i}\}_{i=1}^{N} , we first model the ray casting process using the RPC model. Next, the sampled points \mathbf{x} along the rays are input into a multi-res hash grid, where features are interpolated at multiple levels. These features are concatenated with the frequency-embed features of the sampled points \text{Emb}(\mathbf{x}) to form a complete feature vector \mathbf{h}(\mathbf{x}) , which is then input into the MLP to obtain both the color \mathbf{c}(\mathbf{x}) and SDF values f(\mathbf{x}) of the sampled points. In addition, relative depth \hat{D}_{dense} is predicted from the satellite images using a pre-trained depth model. This relative depth is fused with sparse point clouds obtained through triangulation and bundle adjustment of the satellite images, forming a dense depth map D_{dense} at a real-world scale. The volumetric density distribution is then constrained using depth supervision, optimizing the SDF. Finally, we extract edge information from the depth map, treating non-edge regions as continuous planes and applying smoothness constraints. The following subsections provide a detailed introduction to our proposed method. The pipeline of the method is shown in Fig. 2 . Fig. 2: Pipeline of our method. Sat-DN takes multi-view satellite imagery as input. The imagery undergoes RPC ray modelling to generate spatial sampling positions, which are then encoded into features using a multi-resolution hash grid. An MLP receives the hash-encoded spatial sampling point positions, frequency-encoded pixel ray directions, and the sun direction as input and outputs the color and SDF value of the spatial sampling position. A pre-trained depth model estimates the relative depth information for the area covered by the satellite images, which is then fused with spatial sparse points obtained through bundle adjustment to generate dense ground-truth depth with absolute scale. By minimizing the differences in pixel color, rendered depth versus dense depth and surface normal angular consistency, the hash features and MLP parameters are optimized. This process enables the end-to-end reconstruction of DSMs and Meshes. The depth and normal loss are further elaborated in Section IV-A and IV-B separately. IV-A Depth Fusion and Regularization Due to the significant variations in lighting conditions in satellite images and the differences in image color styles across multi-temporal data, relying solely on comparing pixel discrepancies between training images and rendered images introduces ambiguities in the optimization process. Therefore, globally consistent depth information is needed to guide the optimization effectively. Given a satellite image I and a pre-trained depth model F_{\theta} , we can obtain the relative normalized dense depth of image I as \hat{D}^{\text{dense}}=F_{\theta}(I) . The scale information is calculated from the sparse 3D points \mathbf{P}=\{(lon_{i},lat_{i},alt_{i})\in\mathbb{R}^{3}|i=1,2,...N\} obtained through image triangulation and bundle adjustment. Since the 3D points contain only information on longitude, latitude, and altitude, following [ 5 ] , we obtain sparse depth of a point D^{\text{sparse}}_{i} by calculating the distance between itself and the start point of the ray that goes through the point from the re-parameterized reference plane. Given a 3D sparse point P_{i}\in\mathbf{P} , whose projection on the 2D image is (u_{i},v_{i})\in\mathbb{R}^{2} , assuming the image coordinate is derived from the corrected satellite RPC model. In addition, we can use RPC to calculate longitude and latitude reversely: lon_{i},lat_{i}=\text{RPC}(u_{i},v_{i},alt_{i}), (4) where lon_{i},lat_{i},alt_{i} means longitude, latitude and altitude of point P_{i} separately. Since the projection coordinate (u_{i},v_{i}) does not align with the integer pixel, we approximate the projection (u_{i}^{\prime},v_{i}^{\prime})=\text{round}(u_{i},v_{i}) . With the reprojection position P_{i}^{\prime}=(lon_{i}^{\prime},lat_{i}^{\prime},alt_{i})=(\text{RPC}(u^{\prime}_{i},v^{\prime}_{i},alt_{i}),alt_{i}) and ray’s start point P_{i}^{\text{ref}}=(lon_{i}^{\text{ref}},lat_{i}^{\text{ref}},alt^{\text{ref}})=(\text{RPC}(u^{\prime}_{i},v^{\prime}_{i},alt^{\text{ref}}),alt^{\text{ref}}) , we can derive the following: D^{\text{sparse}}_{i}=\left\|P_{i}^{\prime}-P^{\text{ref}}_{i}\right\|_{2}, (5) where alt^{\text{ref}} means the altitude of the upper reference plane. The entire ray projection process is defined based on the UTM coordinate system, from the reference plane at the highest altitude to the reference plane at the lowest altitude. We treat the sparse points as the true terrain surface positions to correct the dense relative depth. Based on the dense relative depth and sparse absolute depth, we can obtain dense absolute depth as: D^{\text{dense}}_{i}=s\cdot\hat{D}^{\text{dense}}_{i}+o, (6) where \hat{D}^{\text{dense}}_{i} is relative depth of pixel (u_{i},v_{i}) and s , o are scale value and offset value, computed through minimizing the differences between sparse absolute depth and fitted depth from the relative one: s^{*},o^{*}=\arg\min_{s,o}\sum_{i=1}^{HW}|w_{i}\cdot D^{\text{sparse}}_{i}-D^{\text{dense}}_{i}(s,o)|^{2}, (7) where w_{i}\in[0,1] is a normalized weight representing the reprojection error of the point P_{i} onto the image, namely, the fitting confidence for each point. We can use the dense absolute depth D^{\text{dense}}_{i}=s^{*}\cdot\hat{D}^{\text{dense}}_{i}+o^{*} for pixel depth supervision after calculating s^{*} and o^{*} . However, the depth model trained on a large set of standard photos is not always accurate when applied to satellite images. The depth predicted by the model for water surfaces creates discontinuities with the surrounding land, making depth supervision ineffective. Thus, we apply a semantic mask M to exclude water regions with erroneous depth in the training stage. In neural radiance fields, the pixel color is synthesized by the colors of the sampled points along the ray through volume rendering. Similarly, we can obtain the pixel depth using the same method, \tilde{D}(\mathbf{r})=\sum_{i=1}^{N}T_{i}\alpha_{i}d_{i}, (8) where d_{i} is the depth of the sampled point i . The \alpha_{i} and T_{i} of the Eqn. 8 can used the same value from Eqn. 1 , without redundant computation. Depth supervision is applied on a per-pixel basis using the L1 loss: \mathcal{L}_{depth}=\frac{1}{K}\sum_{i=1}^{K}M_{i}|\tilde{D}_{i}-D^{\text{gt}}_{i}|, (9) where \tilde{D}_{i} is the predicted depth and D_{i}^{\text{gt}} is the ground truth dense depth D^{\text{dense}} for pixel i . M_{i}\in\{0,1\} is the water mask and K is the batch size. Analogous to an LLFF space, we transform the space between the upper and lower reference planes into a canonical space, which is suitable for optimization. The depth in our method is reparameterized as the distance between a point on a ray and the ray’s origin on the upper reference plane. We fit the sparse reparameterized depth values from sparse points into a dense relative depth map predicted by the depth model. Due to the large distance between the satellite sensor and the Earth’s surface, and the limited perspective of the satellite, the variation between true depth and reparameterized depth is relatively small. This enables us to obtain an optimal least-squares solution through iterative refinement. To address issues caused by variations in pixel photometry, the depth is used to guide the training rather than to indicate the exact position of the ground-truth surface. IV-B Normal Regularization Based on Angular Consistency Normals are a critical factor in representing geometry, and a reasonable distribution of normals is essential to ensure geometric accuracy. However, neural radiance fields typically optimize pixel color differences without explicitly constraining geometry in prior methods [ 18 , 5 , 56 , 10 , 55 ] . In satellite images, extensively repeated textures or weakly textured areas often exhibit color variations within the same region, meaning that relying solely on color constraints can introduce surface noise, thereby reducing the geometric accuracy of the reconstructed surface model. We introduce a normal constraint based on angular consistency to address this issue. Due to interference from ground color, directly obtaining normals from satellite images is challenging. We leverage the strong generalization capabilities of depth models, which can provide smooth surface depths and mitigate the impact of color on geometry. Assume the normal for pixel i obtained from the relative depth map, denoted as the ground truth normal \mathbf{n}_{i} , is in the pinhole camera coordinate system. We first calculate the angular difference between the normal pixel i and those of its neighboring pixels: \delta_{i}^{\text{gt}}=\frac{1}{N}\sum_{j\in\text{Adj}(i)}\frac{\mathbf{n}_{i}\cdot\mathbf{n}_{j}}{\|\mathbf{n}_{i}\|\|\mathbf{n}_{j}\|}, (10) where \text{Adj}(i) represents the neighbor 4 pixels around the pixel i , N is the total number of the neighbors. In the SDF network, the normal of the ray \mathbf{r} is the gradient of the SDF value at sampling point along the ray on the surface \mathbf{n}(\mathbf{r})=\nabla f(\mathbf{o}+t\mathbf{d}) , and the resulting normal is in the UTM coordinate system. t means the distance predicted from the reference plane to the surface. Since the implicit SDF is continuous and gradients approach 1 , to reduce computational load, we treat the predicted depth of the central pixel as the depth value for nearby pixels and compute the angular difference between ray \mathbf{r} from pixel i and neighboring rays from adjacent pixels \text{Adj}(i) as follows: \delta_{i}^{\text{pred}}=\frac{1}{N}\sum_{j\in\text{Adj}(i)}\frac{\nabla f(\mathbf{o}_{i}+t_{i}\mathbf{d}_{i})\cdot\nabla f(\mathbf{o}_{j}+t_{i}\mathbf{d}_{j})}{\|\nabla f(\mathbf{o}_{i}+t_{i}\mathbf{d}_{i})\|\|\nabla f(\mathbf{o}_{j}+t_{i}\mathbf{d}_{j})\|}, (11) where \mathbf{o} and \mathbf{d} means the origin and direction of the corresponding rays, t_{i} is the rendered depth of the ray originated from pixel i . N represents the number of adjacent pixels as above. Since the normals calculated from the depth map and the rendered normals are in different coordinate systems, directly constraining the normals themselves is not feasible. Thus, we only constrain the consistency of their distributions. This approach ensures that in planar areas, the angular difference between rendered normals and neighboring normals remains minimal, while in non-planar areas, the difference is greater, guiding the rendered normals closer to the true geometry. Our normal angular consistency loss is defined as follows: \mathcal{L}_{normal}=\frac{1}{K}\sum_{i=1}^{K}(\delta_{i}^{\text{pred}}-\delta_{i}^{\text{gt}})^{2}, (12) where i means the pixel in the image. By introducing the normal angular consistency loss, we can effectively mitigate geometric ambiguities in color rendering caused by color changes on planar surfaces influenced by the interplay between buildings and sunlight. This reduces the erroneous impact of planar texture colors on geometric optimization. IV-C Progressive Training Strategy Due to the limited number of training images and constrained viewing angles, the surface model after training often contains holes and discontinuous artifacts beyond the surface contours. We observed that jointly optimizing low-resolution and high-resolution encodings tends to result in surface errors. This is because the model adjusts high-frequency features from the beginning of the train, making it prone to local optimization. Moreover, in satellite imagery, the side facades of individual buildings appear only a limited number of times across all images and often exhibit color inconsistencies, resulting in a lack of consistent color supervision. Therefore, directly optimizing high-frequency details from the beginning is unstable and may lead to the fitting of a multimodal volume density field near the surface. In contrast, optimizing low-frequency features first allows the model to learn a roughly continuous surface distribution during the early stages of training, which helps to prevent significant surface deviations when high-frequency features are subsequently introduced. Therefore, we introduced a progressive training strategy, in which low-resolution grid features are activated first, and higher-resolution features are progressively activated as the training progresses. The feature representation for the sampled point \mathbf{x} is defined as: \mathbf{h}(\mathbf{x},\lambda)=\left\{G_{1}(\lambda)h_{1}(\mathbf{x}),\dots,G_{L}(\lambda)h_{L}(\mathbf{x})\right\}, (13) where G_{i}(\lambda) is a gated function \{G_{i}(\lambda)=1,\lambda\geq i;G_{i}(\lambda)=0,\lambda