Effective description of Taylor dispersion in strongly corrugated channels Arthur Alexandre, Thomas Guérin, David S. Dean Abstract We consider Taylor dispersion in periodic but highly corrugated channels. Exact analytical expressions for the long-time diffusion constant and drift along the channel are derived to next-to-leading order in the limit of small channel period. Using these results, we show how an effective model for Taylor dispersion in porous media with tortuous pores can be framed in terms of dispersion in a uniform channel with absorption/desorption at its surface, an effective slip length for the flow at the surface and an effective, universal, diffusion constant on the surface. This work thus extends the concept of an effective slip-length for hydrodynamics flows to Taylor dispersion by those flows. The analytical results are confirmed by numerical calculations, and present a robust method to understand and upscale the transport properties of flows in pore like geometries . I Introduction The transport properties of tracer particles, such as pollutants or reactants, in heterogeneous media at large temporal and spatial scales play a vital role in fluid mechanics, hydrology, chemical engineering, soft matter and solid state physics [ 1 , 2 , 3 , 4 , 5 ] . The average velocity (or drift) and late time diffusivity are essential quantities in the study of mixing [ 6 , 7 , 8 ] , sorting [ 9 ] , chemical delivery [ 2 , 10 ] and chemical reaction dynamics [ 7 , 4 ] . In heterogeneous media, spatial variations in the local diffusivity and drift fields can lead to drastic differences between effective transport coefficients and microscopic ones [ 11 ] . For instance, in confined media, composed of hard obstacles with reflecting walls and in the absence of background hydrodynamic flows, the diffusivity is smaller (sometimes drastically smaller) than the microscopic diffusivity, due to entropic trapping effects [ 12 , 13 , 14 , 15 , 16 ] . However, in the presence of spatially varying hydrodynamic flows, the long-time diffusivity is much larger than the microscopic one, due to the difference in histories of sampling the velocity field: the phenomenon of Taylor dispersion [ 17 ] . Figure 1: (a) Schematic of particle diffusion in an highly corrugated channel advected by a pressure induced hydrodynamic flow \mathbf{u} . (b) Hydrodynamic flow in this channel, for L/a=2 and H/a=3 . Colors represent the norm of the velocity field |\mathbf{u}| (from low value in blue to high values in red, in arbitrary units), white lines are the stream lines. (c) Simplified problem of a particle diffusing in a channel of uniform width, with reversible binding at the walls, surface diffusivity D_{s} and a flow calculated with a slip length b . Here we show how to map the situation (a) onto the transport problem in uniform channels exactly at first order when L/a\to 0 . In the presence of both obstacles and flows, such as in the case of steady state (so non-turbulent) pressure induced flows in non-uniform channels, the effects of entropic trapping and dispersion (by non-uniform flows) compete in a non-trivial way. Most analytical results for this problem have been derived for slowly varying channels [ 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 ] or with perturbative approaches for nearly flat surfaces [ 26 , 1 ] . The fact that the flow itself depends on the geometry of obstacles means that for complex geometries it is often necessary to treat the problem numerically [ 27 , 28 , 29 , 30 , 31 ] . In hydrodynamics, for a flow in the vicinity of a structured surface presenting protrusions [ 32 , 33 , 34 ] or variations in surface properties, a very useful concept is that of an effective slip length [ 35 , 36 , 37 ] which takes into account, in a coarse-grained way, the microscopic aspects of the surface. A similar, but much less studied, question arises as to whether one can define effective boundary conditions for the advection-diffusion of particles moving near a surface presenting protrusions as shown in Figs. 1 (a),(b). Clearly, when trapped in a protrusion tracer dispersion parallel to the channel is reduced. It is natural to ask if this reduction can be captured using a model of a uniform channel with a sticky surface, that is to say a surface having absorption/desorption of particles (corresponding to entering/leaving a protrusion), as well as an effective surface diffusion constant (modeling the fact that there is still some dispersion along the channel due to the finite width of the protrusions). This effective picture was introduced in the context of diffusion in comb-like geometries [ 38 ] , for example in Refs. [ 39 , 40 ] to study porcuepine-like cylindrical channels connected to very thin finite tubes of finite volume (thus taking up little of the surface area of the tube) and in [ 41 ] for rectangular protrusions, without flow. However, for channels with a generic shape, for which protrusions are not necessarily thin, the mapping onto a flat sticky channel is not obvious since particles in the entrance of the protrusion zones are clearly not completely immobile nor completely mobile. Here, we show how, in the limit of small period, an effective model can be derived which takes into account this effect, and we derive the precise parameters of the effective model depend on the geometry of the protrusions. This means that, in a way similar to the description of the effective electrical properties of complex circuits in terms of simpler ones, the transport in this problem can be described by a cylindrical (or planar) geometry [Fig. 1 (c)] with effective surface absorption/desorption properties, an effective slip length for the flow, and an effective surface diffusion constant. As well as its underlying physical interest, the theory here clearly has potential to be used for upscaling methods for transport in tortuous porous media, where the effect of dead ends (in which the flow cannot penetrate) could be taken into account via effective (and potentially spatially varying) adsorption and desorption coefficients as well as effective surface diffusivity. The outline of the paper is as follows. In Section II , we introduce the physical problem of diffusion in channels and our formalism to calculate the diffusivity. In Section III , we provide the solution of this problem in the strong corrugation limit. In Section IV , we compare our results to the case of dispersion in uniform channels, with flat but sticky walls, and we show how to identify analytically the effective adsorption and desorption coefficients, the effective (hydrodynamic) slip length and the effective surface diffusivity. Our results are validated numerically in Section V and generalized to 3D axisymmetric channels in Section VI . II Physical problem Consider a point-like tracer particle diffusing with microscopic isotropic diffusivity D and advected by incompressible flow \mathbf{u}(\mathbf{r}) , in a pore like geometry with rapid undulations perpendicular to the channel axis. Specifically, we assume that geometry is a channel of width 2h(x) in d=2 for symmetric channel, or of local radius h(x) in d=3 for axisymmetric tubes, where x here denotes the coordinate along the channel. We assume that h and \mathbf{u} are periodic in the x direction, with period L . This periodicity ensures that at long times one can define effective drift v and diffusivity D_{e} as \displaystyle v=\frac{\overline{[x(t)-x(0)]}}{t},\ D_{e}\underset{t\to\infty}{\simeq}\frac{\overline{[x(t)-x(0)-vt]^{2}}}{2t}, (1) where \overline{\cdots} denotes the ensemble average over stochastic trajectories. The average local drift is v=\Omega^{-1}\int_{\Omega}\mbox{d}\mathbf{r}\ u_{x}(\mathbf{r}) , with \Omega the volume of one period of the channel. To calculate the effective diffusivity, many approaches have been proposed, such as the homogenization approach [ 42 , 30 , 43 , 28 , 29 ] , macrotransport theory [ 44 , 4 ] , or Kubo-type formulas [ 45 , 46 ] , where D_{e} is expressed as \displaystyle D_{e}=D-\int_{0}^{\infty}\mbox{d}t\ \overline{[V_{x}(\mathbf{r}(t))-\overline{V_{x}}][V_{x}^{*}(\mathbf{r}(0))-\overline{V_{x}^{*}}]}. (2) Here, \mathbf{V}=\mathbf{u}+D\,\mathbf{n}\,\delta_{s}(\mathbf{r}) is the local drift, where \delta_{s} is the surface delta function formally representing the “kicks” applied to the particle when it touches the reflecting surface, preventing it from entering the obstacles (see Appendix A ) . Concretely, the term \mathbf{n} is the normal to the surface (oriented towards the fluid) and \delta_{s} defined such that \int_{\Omega}\mbox{d}\mathbf{r}\,\delta_{s}(\mathbf{r})g(\mathbf{r})=\int_{\partial\Omega}\mbox{d}S\,g(\mathbf{r}) for any function g . Next, \mathbf{V}^{*} is the drift after time reversal , which is equal to \mathbf{V}^{*}=-\mathbf{u}(\mathbf{r})+D\,\delta_{s}(\mathbf{r})\,\mathbf{n} since in the time-reversed situation, particles see the reversed flow field -\mathbf{u} and are submitted to the same obstacles. The correlation function in Eq. 2 can then be calculated by defining an auxiliary field f as \displaystyle f(\mathbf{r})=-\int_{0}^{\infty}\mbox{d}t\int_{\Omega}\mbox{d}\mathbf{r}_{0}\ P(\mathbf{r},t|\mathbf{r}_{0})[V_{x}^{*}(\mathbf{r}_{0})-\overline{V_{x}^{*}}], (3) where P(\mathbf{r},t|\mathbf{r}_{0}) is the probability density of observing \mathbf{r} (modulo the period) at t , starting from \mathbf{r}_{0} . This probability density satisfies the Fokker-Planck equation \displaystyle\partial_{t}P=-\nabla\cdot[\mathbf{u}\,P-D\nabla P], \displaystyle\mathbf{n}\cdot[\mathbf{u}\,P-D\nabla P]_{\mathbf{r}\in\partial\Omega}=0 (4) and reaches a steady state which is uniform due to the incompressibility of the flow, P(\mathbf{r},t\to\infty)=1/\Omega . With the definition ( 3 ) of f , the diffusivity ( 2 ) is given by \displaystyle D_{e} \displaystyle=D+\frac{1}{\Omega}\int_{\Omega}\mbox{d}\mathbf{r}\ (u_{x}f-D\partial_{x}f). (5) Furthermore, one can show that the auxiliary field f(\mathbf{r}) satisfies a partial differential equation. Clearly, using the Fokker-Planck equation ( 4 ), one obtains \displaystyle-\nabla\cdot \displaystyle[\mathbf{u}\,f(\mathbf{r})]+D\,\nabla^{2}f(\mathbf{r})= \displaystyle-\int_{0}^{\infty}\mbox{d}t\int_{\Omega}\mbox{d}\mathbf{r}_{0}\,\partial_{t}P(\mathbf{r},t|\mathbf{r}_{0})\,[V_{x}^{*}(\mathbf{r}_{0})-\overline{V_{x}^{*}}]. (6) The integration over t can be performed, leading to \displaystyle-\nabla\cdot \displaystyle(\mathbf{u}f)+D\nabla^{2}f(\mathbf{r}) \displaystyle=-\int_{\Omega}\mbox{d}\mathbf{r}_{0}\left[\frac{1}{\Omega}-\delta(\mathbf{r}-\mathbf{r}_{0})\right][V_{x}^{*}(\mathbf{r}_{0})-\overline{V_{x}^{*}}] \displaystyle=-u_{x}(\mathbf{r})+\overline{u_{x}}+D\,\mathbf{n}\,\cdot\mathbf{e}_{x}\,\delta_{s}(\mathbf{r}). (7) If \mathbf{r} is in the bulk, the delta-surface term vanishes and one obtains \displaystyle-\mathbf{u}\cdot\nabla f+D\nabla^{2}f=v-u_{x} \displaystyle(\mathbf{r}\in\Omega). (8) To find the boundary condition for f , we argue that P(\mathbf{r},t) , and therefore f vanishes for all \mathbf{r} inside the obstacles. Therefore, if one integrates Eq. 7 over a small volume that includes a portion of the surface, taking into account the fact that \mathbf{u} vanishes at the boundary (the no-slip boundary condition), one finds directly \displaystyle D\ \mathbf{n}\cdot\nabla f=D\ \mathbf{n}\cdot\mathbf{e}_{x} \displaystyle(\mathbf{r}\in\partial\Omega), (9) where \mathbf{e}_{x} is the unit vector in the x direction. In addition, it is clear from Eq. 3 that f is periodic and must be of zero spatial average, \int_{\Omega}\mbox{d}\mathbf{r}f(\mathbf{r})=0 . The flow field is assumed to be a steady Stokes flow \displaystyle\nabla\cdot\mathbf{u}=0, \displaystyle\eta\ \nabla^{2}\mathbf{u}-\nabla\Pi=0, (10) where \Pi the pressure field and \eta the fluid viscosity. At the boundaries, the flow vanishes. Since the channel is periodic, the flow is also periodic, and so is the pressure gradient. As a consequence, we can define a parameter (\nabla\Pi)_{\infty} , which sets the magnitude of the flow, so that \Pi(\mathbf{r}+L\mathbf{e}_{x})=\Pi(\mathbf{r})+(\nabla\Pi)_{\infty}L . While the case of weakly varying channels has been studied analytically at length [ 18 , 19 , 20 , 21 , 22 , 23 , 24 , 26 , 1 ] , here we will study the opposite limit L\to 0 where all standard Fick-Jacobs and lubrication methods completely breakdown. III Analytical solution for the strong corrugation limit For fast varying channel L/a\ll 1 , where a=\text{min}[h(x)] , our method of solution relies on identifying the asymptotic behavior of \mathbf{u} and f in three different regions, and using the matched asymptotic expansion method. First, we define the central region (“ c ”) as the region where |y|a],\end{cases} (11) where we have defined the rescaled coordinates \displaystyle X=x/L, \displaystyle Y=(y-a)/L. (12) For the function f , we assume the following series expansion in each region \displaystyle f=\begin{cases}\sum_{n\geq 0}L^{n}f_{n}^{c}(X,y)&[ya].\end{cases} (13) The solutions in each region are found by inserting the above ansätze into the equations for f and \mathbf{u} , solving the resulting equations, and requiring that the solutions can be matched. For example, we require that f_{0}^{*}(X,Y\to\infty)=f_{0}^{p}(X,a) , f_{0}^{*}(X,Y\to-\infty)=f_{0}^{c}(X,a) , \partial_{Y}f_{1}^{*}(X,Y\to+\infty)=\partial_{y}f_{0}^{p}(X,a) , etc [ 48 ] . We now describe the solution in d=2 dimensions, all results will be generalized to d=3 in the SM [ 47 ] . For the flow, at leading order in the central region, it is readily identified to be the Poiseuille flow induced by the pressure gradient with effective vanishing velocities at y=a : \displaystyle\mathbf{u}_{0}=U\left(1-\frac{y^{2}}{a^{2}}\right)\mathbf{e}_{x}, \displaystyle U=-\frac{a^{2}(\nabla\Pi)_{\infty}}{2\eta}. (14) Then, in the inner region, the flow satisfies \displaystyle\tilde{\nabla}\cdot\mathbf{u}^{*}=0, \displaystyle\eta\tilde{\nabla}^{2}\mathbf{u}^{*}-\tilde{\nabla}\Pi^{*}=0, (15) where \tilde{\nabla}=\mathbf{e}_{x}\partial_{X}+\mathbf{e}_{y}\partial_{Y} and \Pi=L\Pi^{*} in the inner region. Furthermore, \mathbf{u}^{*}(X,Y) vanishes for Y>0 and X=-1/2+n , with n integers, and far from the inner region one must recover the flow in the central region, so that \mathbf{u}^{*}(X,Y\to-\infty)\simeq-\frac{2U}{a}Y\mathbf{e}_{x} . The problem for \mathbf{u}^{*} is therefore formally equivalent to that of a two dimensional flow next to a periodic array of parallel semi-infinite lines, with a constant shear far from the plates. This problem has been solved independently in papers by Luchini [ 49 ] and Jeong [ 33 ] in which the explicit form of \mathbf{u}^{*} can be found. Note that, for Y\to\infty , the flow takes the form of a series of eddies whose magnitude decreases exponentially with Y , which means that we can safely consider that the flow vanishes at leading order in the lateral pores, as anticipated in Eq. 11 . These eddies can actually be observed on Fig. 1 (b). For Y\to-\infty , the flow becomes \displaystyle\mathbf{u}^{*}(X,Y\to-\infty)=\frac{2U}{a}\left(-Y+\frac{\beta}{2}\right)\mathbf{e}_{x}, (16) with \beta\simeq 0.1772 , which means that there is an effective slip velocity u_{s}=UL\beta/a at the walls; this phenomenon is well known as the reduction in drag by surface roughness, and the flow at first order in the central region is \mathbf{u}=\mathbf{u}_{0}+u_{s}\mathbf{e}_{x} . This enables one to define an effective slip length \displaystyle b=\frac{u_{s}}{|\partial_{y}u_{x}|_{y=a}}=\frac{\beta L}{2}, (17) which is an intrinsic property of the local surface geometry since it neither depends on the flow nor on the width of the channel. We now apply the same approach to find parameters describing effective boundary conditions for the transport. Next, the equations for f_{i} in the central and the peripheral regions are recurrence equations, here written for n=0,1,2,3 : \displaystyle D(\partial_{X}^{2}f_{n}^{w}+\partial_{y}^{2}f_{n-2}^{w}) \displaystyle-\sum_{m=0}^{n-1}u_{x,m}\partial_{X}f_{n-1-m}^{w}=v_{n-2}-u_{x,n-2}, (18) \displaystyle[(\partial_{X}h)(\partial_{X}f_{n}^{p}-\delta_{n,1})-\partial_{y}f_{n-2}^{p}]_{y=h(X)}=0 (19) (all terms with negative indices are by convention zero), with w\in\{c,p\} and v=\sum_{n\geq 0}v_{n}L^{n} . In the inner region, f^{*} satisfies the Laplace problem \displaystyle(\partial_{X}^{2}+\partial_{Y}^{2})f_{n}^{*}=0, \displaystyle(\partial_{X}f_{n}^{*})_{X=\pm 1/2;Y>0}=\delta_{n,1}. (20) In Appendix B , we find the solution of these equations, for successive values of n , via complex analysis for Eq. 20 (generalizing the analysis of [ 50 ] , without flow, to our situation where the matching conditions are modified by the flow). The diffusivity is finally given by \displaystyle D_{e} \displaystyle=\frac{Da+DL(\ln 2)/\pi}{a+\delta} \displaystyle+\frac{4U^{2}a^{2}}{9D(a+\delta)^{3}}\Bigg\{\frac{17a\delta^{2}}{35}+\frac{6a^{2}\delta}{35}+\frac{2a^{3}}{105}+\tau D\delta\Bigg\} \displaystyle+\frac{4a^{2}Uu_{s}}{45D(a+\delta)^{3}}\Bigg\{6a\delta^{2}+a^{2}\delta+15D\tau\delta\Bigg\}, (21) with \delta=\langle h-a\rangle,\,\tau=\int_{a}^{h_{m}}\frac{dy}{\delta DW(y)}\bigg[\int_{y}^{h_{m}}dy^{\prime}W(y^{\prime})\bigg]^{2}, (22) where \langle g(X)\rangle=\int_{-1/2}^{1/2}dXg(X) is the uniform average over the period and W(y) is the width of the lateral pore at distance y>a from the channel center (divided by L ). IV Correspondence with uniform channels IV.1 Uniform channel with sticky boundaries In order to obtain a physical interpretation of the parameters \tau and \delta , we now consider a model in which the particle diffuses between two flat boundaries which are sticky, with attachment and detachment rates k_{a} and k_{d} respectively. In the bulk of the channel, particles diffuse with diffusion coefficient D in a velocity field u_{e}(y)\mathbf{e}_{x} , while on the surface they diffuse with surface diffusion coefficient D_{s} . In this model, the bulk and surface probability density functions p_{b} and p_{s} obey \displaystyle\partial_{t}p_{b}=-u_{e}(y)\partial_{x}p_{b}+D(\partial_{x}^{2}+\partial_{y}^{2})p_{b} \displaystyle(|y|a . The process in the lateral direction y_{t} obeys \displaystyle\mbox{d}y_{t}=\sqrt{2D}\,\mbox{d}B_{\perp,t}+\frac{D}{k_{\text{B}}T}\varphi^{\prime}(y_{t})\,\mbox{d}t, (29) \displaystyle\varphi(y)=\begin{cases}-k_{\text{B}}T\ln[(y/a)^{d-2}W(y)]&(|y|>a),\\ -k_{\text{B}}T\ln[(y/a)^{d-2}]&(|y|a and is trivially extended for |y|a),\end{cases} (76) where the integration constant C_{0} is fixed by the normalization condition \int_{\Omega}\mbox{d}\mathbf{r}f=0 , which leads to \displaystyle\int_{0}^{a}\mbox{d}yf_{0}^{c}(y)+\int_{a}^{h_{m}}\mbox{d}yW(y)f_{0}^{p}(y)=0. (77) Using the previous result for f_{0}^{c},f_{0}^{p} , the above equation leads to \displaystyle C_{0} \displaystyle=\frac{(-1)}{\langle h\rangle}\Bigg\{\frac{4Ua^{3}}{15}-\frac{a^{3}v_{0}}{3} \displaystyle-v_{0}\int_{a}^{h_{m}}\mbox{d}y\frac{\left[\int_{y}^{h_{m}}\mbox{d}y^{\prime\prime}W(y^{\prime\prime})\right]^{2}}{W(y)}\Bigg\}. (78) B.2 Expression of f in the inner region At this stage, we have completely determined f_{0} , but the expressions for f_{1}(X,y) in the peripheral and central regions cannot be matched, because f_{1}^{p} depends on X whereas f_{1}^{c} does not. This suggests that we look for solutions in the inner layer of the form \displaystyle f(x,y)\simeq f_{0}(a)+Lf^{*}(X,Y). (79) This form is imposed by the matching conditions with the central and peripheral regions: \displaystyle f^{*}(X,Y)\underset{Y\to+\infty}{\simeq} \displaystyle f_{1}^{p}(X,a)+Yf_{0}^{\prime}(a) \displaystyle=[X+b_{1}^{p}(a)]+Yf_{0}^{\prime}(a), (80) \displaystyle f^{*}(X,Y)\underset{Y\to-\infty}{\simeq} \displaystyle f_{1}^{c}(a)+Yf_{0}^{\prime}(a). (81) The equation for f^{*} is found by expanding Eq. 8 in powers of L (after having rescaled x,y by L , using X=x/L,Y=(y-a)/L ), this leads to \displaystyle(\partial_{X}^{2}+\partial_{Y}^{2})f^{*}=0. (82) Furthermore, f^{*} must be periodic in X (with period 1 ), and the boundary conditions are \displaystyle(\partial_{X}f^{*})_{X=\pm 1/2;Y>0}=1, (83) where we have taken the position of the values at which h is minimal at X=1/2+n . In the absence of the term Yf_{0}^{\prime}(a) in the matching conditions ( 80 ) and ( 81 ), this problem was solved in the context of dispersion without flow in [ 50 ] , notably it also arises in the context of the calculation of the drag reduction when the direction of the flow is parallel to semi-infinite plates [ 58 ] . Taking into account the term Yf_{0}^{\prime}(a) slightly modifies the solution for f^{*} , which is \displaystyle f^{*}(X,Y) \displaystyle=Yf_{0}^{\prime}(a)+f_{1}^{c}(a) \displaystyle+\text{Re}\left[\frac{\text{i}}{\pi}\ln\left(1+\sqrt{1+e^{-2\pi\text{i}(X+\text{i}Y)}}\right)\right], (84) where \text{Re}(z) is the real part of a complex number z , and \text{i}^{2}=-1 . Note that this solution can be matched with the peripheral solution under the condition \displaystyle b_{1}^{p}(a)=f_{1}^{c}(a), (85) so that f_{1}^{p} is equal to f_{1}^{c} at the position in the middle position between the necks of the channel ( X=0 ). With this matching condition, we obtain \displaystyle Df_{1}^{c}(y)=\left(v_{1}-\frac{U\beta}{a}\right)\frac{y^{2}-a^{2}}{2}+C_{1}, (86) \displaystyle Db_{1}^{p}(y)=-v_{1}\int_{a}^{y}\frac{\mbox{d}y^{\prime}}{W(y^{\prime})}\int_{y^{\prime}}^{h_{m}}\mbox{d}y^{\prime\prime}W(y^{\prime\prime})+C_{1}. (87) The constant C_{1} is found by requiring that \int_{V}f\mbox{d}\mathbf{r}=0 at order L , so that \displaystyle\int_{0}^{a}\mbox{d}yDf_{1}^{c}(y)+\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}\mbox{d}y\ [Db_{1}^{p}(y)+DX]=0. (88) This leads to \displaystyle C_{1}= \displaystyle-\frac{1}{\langle h\rangle}\Bigg\{-\left(v_{1}-\frac{U\beta}{a}\right)\frac{a^{3}}{3}+D\langle Xh(X)\rangle \displaystyle-v_{1}\int_{a}^{h_{m}}\frac{\mbox{d}y^{\prime}}{W(y^{\prime})}\left[\int_{y^{\prime}}^{h_{m}}\mbox{d}y^{\prime\prime}W(y^{\prime\prime})\right]^{2}\Bigg\}. (89) At this stage, we have fully determined f_{0} and f_{1} in all the regions of the channel. To compute the diffusivity at next-to-leading order in L , we also need to compute \partial_{X}f_{2} at the channel boundary, which can be obtained from Eq. 55 : \displaystyle D[\partial_{X}f_{2}^{p}]_{y=h(X)}=[v_{0}-D(f_{0}^{p})^{\prime\prime}(y)]X+\partial_{y}G_{2}^{p}(y). (90) B.3 Expression of the diffusivity The effective diffusivity D_{e} is computed as follows: \displaystyle D_{e} \displaystyle=D+\frac{1}{\Omega}\int_{\Omega}\mbox{d}\mathbf{r}\,[u_{x}f-D\partial_{x}f] \displaystyle=D+\int_{-1/2}^{1/2}\frac{\mbox{d}X}{\langle h\rangle}\int_{0}^{h(X)}\mbox{d}y\,\left[u_{x}f-\frac{D}{L}\partial_{X}f\right]. (91) Let us write the general expansion \displaystyle D_{e}=D_{e}^{(0)}+L[D_{A}+D_{B}+D_{C}]+\mathcal{O}(L^{2}), (92) where the leading-order term reads: \displaystyle D_{e}^{(0)}=D+\int_{-1/2}^{1/2}\frac{\mbox{d}X}{\langle h\rangle}\left[\int_{0}^{a}\mbox{d}y\,u_{x}^{(0)}f_{0}^{c}-D\int_{a}^{h(X)}\mbox{d}y\,\partial_{X}f_{1}^{p}\right], (93) where this expression takes into account the fact that u_{x} vanishes in the peripheral region, while \partial_{X}f_{0}^{p}=\partial_{X}f_{0}^{c}=0 , and \partial_{X}f_{1}^{c} vanishes in the central region. The next-to-leading order components to the effective diffusivity read: \displaystyle D_{A}=\frac{1}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{0}^{a}\mbox{d}y\,[u_{x}^{(0)}f_{1}^{c}+u_{x}^{(1)}f_{0}^{c}], (94) \displaystyle D_{B}=-\frac{D}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}\mbox{d}y\,\partial_{X}f_{2}^{p}, (95) \displaystyle D_{C}=-\frac{D}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{-\infty}^{\infty}\mbox{d}Y\,[\partial_{X}f^{*}(X,Y)-\theta(Y)], (96) where \theta(\cdot\cdot\cdot) is the Heaviside theta function. Note that the last integral is the contribution due to the inner layer f^{*} . To make explicit the origin of D_{B} and D_{C} , we consider the integral \displaystyle J=\int_{-1/2}^{1/2}\int_{0}^{h(X)}\mbox{d}y\,\partial_{X}f(X,y), (97) which is one of the components of the effective diffusivity in Eq. 91 . At leading order in L , we have J\simeq J_{0} with \displaystyle J_{0}= \displaystyle\int_{-1/2}^{1/2}\int_{0}^{a}\mbox{d}y\,\partial_{X}f_{1}^{c}(X,y) \displaystyle+\int_{-1/2}^{1/2}\int_{a}^{h(X)}\mbox{d}y\,\partial_{X}f_{1}^{p}(X,y). (98) To calculate the next-to-leading order, we define the intermediate length \varepsilon with L\ll\varepsilon\ll a , and we write \displaystyle J-J_{0}= \displaystyle\int_{-1/2}^{1/2}\mbox{d}X\bigg\{\int_{0}^{a-\varepsilon}\mbox{d}y\,\partial_{X}(f-f_{1}^{c})+\int_{a-\varepsilon}^{0}\mbox{d}y\,\partial_{X}(f-f_{1}^{c})\bigg. \displaystyle\bigg.+\int_{0}^{a+\varepsilon}\mbox{d}y\,\partial_{X}(f-f_{1}^{p})+\int_{a+\varepsilon}^{h(X)}\mbox{d}y\,\partial_{X}(f-f_{1}^{p})\bigg\}. (99) In each of these regions, we approximate \partial_{X}(f-f_{1}) by its expression in the appropriate region of the boundary layer expansion: \displaystyle J-J_{0} \displaystyle\simeq L\int_{-1/2}^{1/2}\mbox{d}X\bigg\{\int_{0}^{a-\varepsilon}\mbox{d}y\,\partial_{X}f_{2}^{c} \displaystyle+\int_{-\frac{\varepsilon}{L}}^{0}\mbox{d}Y\partial_{X}[f^{*}(X,Y)-\partial_{X}f_{1}^{p}(X,a+YL)] \displaystyle+\int_{0}^{\frac{\varepsilon}{L}}\mbox{d}Y\partial_{X}[f^{*}(X,Y)-\partial_{X}f_{1}^{c}(X,a+YL)] \displaystyle+\int_{a+\varepsilon}^{h(X)}\mbox{d}y\partial_{X}f_{2}^{p}\bigg\}, (100) where we have used Y=(y-a)/L in the boundary layer. Now, using \partial_{X}f_{2}^{c}=\partial_{X}f_{1}^{c}=0 , in the limit L\to 0 , with \varepsilon/L\gg 1 and \varepsilon\ll a , we obtain \displaystyle J-J_{0}\simeq \displaystyle L\int_{-1/2}^{1/2}\mbox{d}X\Bigg\{\int_{-\infty}^{0}\mbox{d}Y\partial_{X}f^{*}(X,Y) \displaystyle+\int_{0}^{\infty}\mbox{d}Y\partial_{X}[f^{*}(X,Y)-\partial_{X}f_{1}^{p}(X,a)] \displaystyle+\int_{a}^{h(X)}\mbox{d}y\partial_{X}f_{2}^{p}\Bigg\}. (101) Noting that \partial_{X}f_{1}^{p}(X,a)=1 , using the above expression to evaluate the integrals involving \partial_{X}f in Eq. 91 , we obtain the terms D_{B} and D_{C} defined in Eqs. 95 and 96 . Using Eqs. 76 , 78 and 86 , the integrals in the leading order term can be calculated, leading to \displaystyle D_{e}^{(0)}=\frac{Da}{\langle h\rangle}+\frac{4U^{2}a^{2}}{9D\langle h\rangle^{3}}\Bigg\{\frac{17a\langle\eta\rangle^{2}}{35}+\frac{6a^{2}\langle\eta\rangle}{35}+\frac{2a^{3}}{105} \displaystyle+\int_{a}^{h_{m}}\mbox{d}y\frac{\left(\int_{y}^{h_{m}}\mbox{d}y^{\prime}W(y^{\prime})\right)^{2}}{W(y)}\Bigg\}, (102) where we have defined \eta=h-a . Let us now calculate the terms for the diffusivity at next-to-leading order. First, using Eq. 86 , we obtain \displaystyle D_{A}= \displaystyle-\frac{v_{0}\langle Xh(X)\rangle}{\langle h\rangle}+\frac{4aU^{2}\beta}{45D\langle h\rangle^{3}}\Bigg[6a\langle\eta\rangle^{2} \displaystyle+a^{2}\langle\eta\rangle+15\int_{a}^{h_{m}}\mbox{d}y\frac{\left(\int_{y}^{h_{m}}\mbox{d}y^{\prime}W(y^{\prime})\right)^{2}}{W(y)}\Bigg]. (103) Next, using Eq. 55 we obtain \displaystyle D_{B}=\frac{(-1)}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}\mbox{d}y\,\Big\{ \displaystyle[v_{0}-D(f_{0}^{p})^{\prime\prime}(y)]X \displaystyle+\partial_{y}G_{2}^{p}(y)\Big\}. (104) Performing the integral over y , and using the property \int_{-1/2}^{1/2}\mbox{d}XX=0 , we obtain \displaystyle D_{B}=-\frac{1}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X\Big\{ \displaystyle[v_{0}h(X)-D(f_{0}^{p})^{\prime}(h(X))]X \displaystyle+G_{2}^{p}(h(X))-G_{2}^{p}(a)\Big\}. (105) Using Eq. 61 , we can simplify this expression: \displaystyle D_{B}=-\frac{1}{\langle h\rangle}\int_{-1/2}^{1/2}\mbox{d}X \displaystyle\Bigg[v_{0}h(X)X-G_{2}^{p}(a) \displaystyle-v_{0}\int_{-1/2}^{X}\mbox{d}w\,w\,h^{\prime}(w)\Bigg]. (106) Writing Eq. 61 for X=-1/2 and X=1/2 leads to \displaystyle G_{2}^{p}(a)=-D(f_{0}^{p})^{\prime}(a)/2=-\frac{v_{0}\langle Xh^{\prime}(X)\rangle}{2}. (107) Using integrations by parts, we also note that \displaystyle\int_{-1/2}^{1/2}\mbox{d}X \displaystyle\int_{-1/2}^{X}\mbox{d}w\,w\,h^{\prime}(w) \displaystyle=-\int_{-1/2}^{1/2}\mbox{d}XX^{2}h^{\prime}(X)+\frac{\langle Xh^{\prime}(X)\rangle}{2} \displaystyle=2\langle X(h(X)-a)\rangle+\frac{\langle Xh^{\prime}(X)\rangle}{2}. (108) As a consequence, we obtain for D_{B} (noting that, trivially, \langle X\rangle=0 ) \displaystyle D_{B}=\frac{v_{0}}{\langle h\rangle}\langle h(X)X\rangle. (109) Last, the term D_{C} can be calculated by performing the integration over X in Eq. 96 : \displaystyle D_{C}=\frac{(-D)}{\langle h\rangle}\int_{-\infty}^{\infty}\mbox{d}Y\left[f^{*}\left(\frac{1}{2},Y\right)-f^{*}\left(\frac{-1}{2},Y\right)-\theta(Y)\right]. (110) Using the explicit value of f^{*} given by Eq. 84 , we obtain \displaystyle D_{C} \displaystyle=-\frac{D}{\langle h\rangle}\int_{0}^{\infty}\mbox{d}Y\left[\frac{2}{\pi}\text{Arctan}\left(\sqrt{e^{2\pi Y}-1}\right)-1\right] \displaystyle=\frac{D\ln 2}{\pi\,\langle h\rangle}. (111) Interestingly this is the same result as that computed without flow in Ref. [ 50 ] , although the function f^{*} itself is modified by the flow. Collecting these results, we find our final expression for the effective diffusivity \displaystyle D_{e}= \displaystyle\frac{Da}{\langle h\rangle}+\frac{DL\ln 2}{\pi\,\langle h\rangle}+\frac{4U^{2}a^{2}}{9D\langle h\rangle^{3}}\Bigg\{\frac{17a\langle\eta\rangle^{2}}{35}+\frac{6a^{2}\langle\eta\rangle}{35} \displaystyle+\frac{2a^{3}}{105}+\int_{a}^{h_{m}}\mbox{d}y\frac{\left(\int_{y}^{h_{m}}\mbox{d}y^{\prime}W(y^{\prime})\right)^{2}}{W(y)}\Bigg\} \displaystyle+\frac{4aLU^{2}\beta}{45D\langle h\rangle^{3}}\Bigg\{6a\langle\eta\rangle^{2}+a^{2}\langle\eta\rangle \displaystyle+15\int_{a}^{h_{m}}\mbox{d}y\frac{\left(\int_{y}^{h_{m}}\mbox{d}y_{1}W(y_{1})\right)^{2}}{W(y)}\Bigg\}. (112) Appendix C Effective diffusivity for uniform 2D channels with sticky boundaries Here we explain how the effective diffusivity for a flat channel with sticky walls can be obtained by using the results of Ref. [ 51 ] , where in 2D it was obtained that \displaystyle D_{e} \displaystyle=D_{b}P_{B}+D_{s}P_{S} \displaystyle+\int_{-a}^{a}d{y}_{1}\int_{-a}^{a}d{y}_{2}u_{x}({y}_{1})u_{x}({y}_{2})B({y}_{1}|{y}_{2})p_{b}({y}_{2}), (113) with P_{B} the stationary probability to be observed in the bulk, P_{S} the stationary probability to be observed on the surfaces, and B defined by \displaystyle B({y}_{1}|{y}_{2})=\frac{1}{2D_{b}(a+\delta)^{2}}\Bigg[\frac{a^{3}}{3}+a^{2}\delta+a\delta^{2} \displaystyle-(a+\delta)^{2}|y_{1}-y_{2}|+(a+\delta)\frac{(y_{1}^{2}+y_{2}^{2})}{2}\Bigg], (114) with \delta=k_{a}/k_{d} . Moreover, if p_{b}(y,t) is the marginal probability to observe the particle in the bulk at position y in the steady state, and p_{s}^{+} and p_{s}^{-} the probability to observe the particle attached to the upper (and lower) wall, respectively, one has \displaystyle p_{b}k_{a}=p_{s}^{+}k_{d}=p_{s}^{-}k_{d},\ p_{s}^{+}=p_{s}^{-}=\frac{P_{S}}{2},\ P_{B}=2ap_{b}, (115) from which it is easy to show that \displaystyle p_{b}=\frac{1}{2(a+\delta)}, \displaystyle p_{s}^{+}=p_{s}^{-}=\frac{\delta}{2(a+\delta)}, (116) \displaystyle P_{B}=\frac{a}{a+\delta}, \displaystyle P_{S}=\frac{\delta}{a+\delta}. (117) Applying Eq. 113 with u_{e}(y)=u_{x}^{(0)}(y)+Lu_{x}^{(1)}(y) leads to Eq. ( 21 ) for the effective diffusivity in a planar channel. Appendix D Diffusivity for translationally invariant channel with anisotropic, spatially varying diffusivity For d=2 , the equilibrium probability ( 32 ) for the lateral variable y reads \displaystyle p_{e}(y)=\frac{1}{\langle h\rangle}\times\begin{cases}W(y)&(|y|>a),\\ 1&(|y|a , the effective diffusivity obtained with Eq. 31 reads \displaystyle D_{e}=\frac{(a+\ell)D}{\langle h\rangle}+\frac{1}{D\langle h\rangle}\int_{a}^{h_{m}}\mbox{d}y\frac{\left\{v\int_{y}^{h_{m}}\mbox{d}y_{1}W(y_{1})\right\}^{2}}{W(y)} \displaystyle+\int_{0}^{a}\frac{\mbox{d}y}{D\langle h\rangle}\left\{\int_{y}^{a}\mbox{d}y_{1}[u_{e}(y_{1})-v]-\int_{a}^{h_{m}}\mbox{d}y_{1}W(y_{1})v\right\}^{2} \displaystyle=\frac{(a+\ell)D}{\langle h\rangle}+\frac{1}{D\langle h\rangle}\int_{a}^{h_{m}}\mbox{d}y\frac{\left\{v\int_{y}^{h_{m}}\mbox{d}y_{1}W(y_{1})\right\}^{2}}{W(y)} \displaystyle+\frac{1}{D\langle h\rangle}\int_{0}^{a}\mbox{d}y\left\{\int_{y}^{a}\mbox{d}y_{1}[u_{x}(y_{1})-v]-\delta v\right\}^{2} (119) Using the form u_{e}=U(1-y^{2}/a^{2})+u_{s} , we finally obtain Eq. ( 21 ) if one sets \ell=L\ln 2/\pi . Appendix E Calculation details in 3D for axisymmetric channels Here we explain how to generalize the calculation of the diffusivity to the case of a three-dimensional axisymmetric channel. The calculations here are essentially the same as those of Section Appendix B but are presented in detail for the sake of clarity. Here we keep the notation x to represent the coordinate along the channel axis, x=X/L , y>0 denotes the distance to the central axis, and h(X) is the local channel radius. Let us first consider the pressure-induced flow. As in 2D, the structure of the flow is given by \displaystyle\mathbf{u}\underset{L\to 0}{\simeq}\begin{cases}\mathbf{u}_{0}(X,y)+L\mathbf{u}_{1}(X,y)+...&[ya],\end{cases} (120) At leading order, the flow \mathbf{u}_{0} is a pressure induced flow in a uniform channel of radius a , since it depends only on y the Stokes equations take the form \displaystyle\eta\left(\frac{1}{y}\partial_{y}(y\partial_{y}u_{x})+\partial_{x}^{2}u_{x}\right)-\partial_{x}\Pi=0. (121) This equation, with the boundary condition \mathbf{u}_{0}(y=a)=0 is readily solved: \displaystyle\mathbf{u}_{0}=U(1-y^{2}/a^{2})\,{\mathbf{e}}_{x}, \displaystyle U=-\frac{a^{2}(\nabla\Pi)_{\infty}}{2\eta}. (122) Next, near the entrance of the lateral regions, the field \mathbf{u}^{*}(X,Y) satisfies exactly the same equations as in the two-dimensional case, so that the effective slip velocity is still given by u_{s}=UL\beta/a . This leads to a flow at next-to-leading order which is uniform \displaystyle\mathbf{u}_{1}=(U\beta/a)\,{\mathbf{e}}_{x}. (123) As a consequence the average flow in the x direction reads \displaystyle v=\frac{\int_{0}^{a}\mbox{d}yy[U(1-y^{2}/a^{2})+UL\beta/a]}{\int_{-1/2}^{1/2}\mbox{d}X\int_{0}^{h(X)}\mbox{d}yy}=v_{0}+Lv_{1}+\mathcal{O}(L^{2}), (124) with \displaystyle v_{0}=\frac{a^{2}U}{2\langle h^{2}\rangle}, \displaystyle v_{1}=\frac{Ua\beta}{\langle h^{2}\rangle}. (125) Next, we focus on the calculation of f , which satisfies the equations \displaystyle-\frac{u_{x}}{L}\partial_{X}f+D\left(\frac{1}{L^{2}}\partial_{X}^{2}f+\frac{1}{y}\partial_{y}(y\partial_{y}f)\right)=v-u_{x}, (126) in both peripheral and central regions. In the peripheral region, the boundary condition is \displaystyle\frac{1}{L}(\partial_{X}h)\left(\frac{\partial_{X}f^{p}}{L}-1\right)-\partial_{y}f^{p}=0 \displaystyle[y=h(X)], (127) while for the central region one has the condition that f is periodic of period 1 and the condition \partial_{y}f^{c}=0 at y=0 . Inserting the series expansion in powers of L , f^{w}=\sum_{n\geq 0}L^{n}f_{n}^{w}(X,y) ( w\in\left\{c,p\right\} ) in both central and peripheral regions into Eqs. 126 and 127 , we find that Eqs. 47 , 48 , 49 and 50 found for the two-dimensional case are unchanged, so that the general form of solutions for f is unchanged at order 1 and L : \displaystyle f_{0}^{c}(X,y)=f_{0}^{c}(y), \displaystyle f_{0}^{p}(X,y)=f_{0}^{p}(y), (128) \displaystyle f_{1}^{c}(X,y)=f_{1}^{c}(y), \displaystyle f_{1}^{p}(X,y)=X+b_{1}^{p}(y), (129) where f_{0}^{c},f_{0}^{p},f_{1}^{c},b_{1}^{p} are functions of y only. To determine these functions, we need to consider the next orders in the power expansion of Eqs. 126 and 127 . First, for the peripheral region (where u_{x}=0 ), we obtain \displaystyle D\left[\partial_{X}^{2}f_{2}^{p}+\frac{1}{y}\partial_{y}(y\partial_{y}f_{0}^{p})\right]=v_{0}, (130) \displaystyle D\left[\partial_{X}^{2}f_{3}^{p}+\frac{1}{y}\partial_{y}(y\partial_{y}f_{1}^{p})\right]=v_{1}, (131) Integrating over the variable X , we obtain \displaystyle D\partial_{X}f_{2}^{p}=\left[v_{0}-D\frac{1}{y}\partial_{y}(y\partial_{y}f_{0}^{p}(y))\right]X+A_{2}^{p}(y), (132) \displaystyle D\partial_{X}f_{3}^{p}=\left[v_{1}-D\frac{1}{y}\partial_{y}(y\partial_{y}b_{1}^{p}(y))\right]X+A_{3}^{p}(y), (133) where A_{2}^{p} and A_{3}^{p} are functions of y only. The boundary conditions are \displaystyle(h^{\prime}(X)\partial_{X}f_{2}^{p}-\partial_{y}f_{0}^{p})_{y=h(X)}=0, (134) \displaystyle(h^{\prime}(X)\partial_{X}f_{3}^{p}-\partial_{y}f_{1}^{p})_{y=h(X)}=0, (135) so that, using Eqs. 132 and 133 , we obtain \displaystyle h^{\prime}(X)\Bigg\{ \displaystyle\left[v_{0}-D(f_{0}^{p})^{\prime\prime}(h(X))-D\frac{(f_{0}^{p})^{\prime}(h(X))}{h(X)}\right]X \displaystyle+A_{2}^{p}(h(X))\Bigg\}=D(f_{0}^{p})^{\prime}(h(X)), (136) \displaystyle h^{\prime}(X)\Bigg\{ \displaystyle\left[v_{1}-D(b_{1}^{p})^{\prime\prime}(h(X))-D\frac{(b_{1}^{p})^{\prime}(h(X))}{h(X)})\right]X \displaystyle+A_{3}^{p}(h(X))\Bigg\}=D(b_{1}^{p})^{\prime}(h(X)). (137) Multiplying these equations by h(X) and integrating once leads to \displaystyle DXh(X)(f_{0}^{p})^{\prime}(h(X))=v_{0}\int_{-1/2}^{X}\mbox{d}w\,h^{\prime}(w)h(w)w \displaystyle+G_{2}^{p}(h(X)), (138) \displaystyle DXh(X)(b_{1}^{p})^{\prime}(h(X))=v_{1}\int_{-1/2}^{X}\mbox{d}w\,h^{\prime}(w)h(w)w \displaystyle+G_{3}^{p}(h(X)), (139) where G_{2}^{p} and G_{3}^{p} are primitive functions of yA_{2}^{p} and yA_{3}^{p} , respectively: \partial_{y}[G_{i}^{p}(y)]=yA_{i}^{p}(y) ( i\in\left\{2,3\right\} ). Now, for a given value of y , we can find two values of X , say X_{1}(y) and X_{2}(y) so that y=h(X_{1}(y))=h(X_{2}(y)) , with X_{1}(y)a),\end{cases} (152) where the integration constant C_{0} is fixed by the normalization condition \int_{\Omega}\mbox{d}\mathbf{r}f=0 , which gives \displaystyle\int_{0}^{a}dy\,yf_{0}^{c}(y)+\int_{a}^{h_{m}}dy\,yW(y)f_{0}^{p}(y)=0. (153) Using the previous expressions for f_{0}^{c},f_{0}^{p} , the above equation leads to \displaystyle C_{0}= \displaystyle-\frac{2}{\langle h^{2}\rangle}\Bigg\{U\frac{a^{4}}{24}-\frac{a^{4}v_{0}}{16} \displaystyle-v_{0}\int_{a}^{h_{m}}dy\frac{\left[\int_{y}^{h_{m}}dy^{\prime\prime}y^{\prime\prime}W(y^{\prime\prime})\right]^{2}}{W(y)y}\Bigg\}, (154) where we have used the fact that \displaystyle\int_{0}^{a}dy\,y \displaystyle C_{0}+\int_{a}^{h_{m}}dy\,yW(y)C_{0} \displaystyle=\int_{-1/2}^{1/2}\mbox{d}X\int_{0}^{h(X)}dy\,yC_{0} \displaystyle=\int_{-1/2}^{1/2}\mbox{d}X\,\frac{h^{2}(X)}{2}C_{0}=\frac{C_{0}\langle h^{2}(X)\rangle}{2}. (155) At the boundary layer y\simeq a we can perform the exact same analysis as in the 2D case, we find that f^{*} has exactly the same form as in 2D, with the consequence that solutions can be matched only if \displaystyle b_{1}^{p}(a)=f_{1}^{c}(a). (156) Applying this matching condition, we obtain \displaystyle Df_{1}^{c}(y)=\left(v_{1}-\frac{U\beta}{a}\right)\frac{y^{2}-a^{2}}{4}+C_{1}, (157) \displaystyle Db_{1}^{p}(y)=-v_{1}\int_{a}^{y}\frac{dy^{\prime}}{W(y^{\prime})y^{\prime}}\int_{y^{\prime}}^{h_{m}}dy^{\prime\prime}W(y^{\prime\prime})y^{\prime\prime}+C_{1}, (158) and the constant C_{1} is found by requiring that \int_{V}f\mbox{d}\mathbf{r}=0 at order L , so that \displaystyle\int_{0}^{a}dy \displaystyle\,yDf_{1}^{c}(y) \displaystyle+\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}dy\,y[Db_{1}^{p}(y)+DX]=0. (159) This leads to \displaystyle C_{1}=-\frac{2}{\langle h^{2}\rangle}\Bigg\{-\left(v_{1}-\frac{U\beta}{a}\right)\frac{a^{4}}{16}+\frac{D\langle Xh^{2}(X)\rangle}{2} \displaystyle-v_{1}\int_{a}^{h_{m}}\frac{dy^{\prime}}{W(y^{\prime})y^{\prime}}\left[\int_{y^{\prime}}^{h_{m}}dy^{\prime\prime}W(y^{\prime\prime})y^{\prime\prime}\right]^{2}\Bigg\}. (160) At this stage, we have fully determined f_{0} and f_{1} in all the regions of the channel. To compute the diffusivity at next-to-leading order in L , we also need to compute \partial_{X}f_{2} at the channel boundary, this can be obtained from Eq. 132 (up to a constant) as \displaystyle D\partial_{X}f_{2}^{p}=\left[v_{0}-D\frac{1}{y}\partial_{y}(y\partial_{y}f_{0}^{p}(y))\right]X+\frac{1}{y}\partial_{y}G_{2}^{p}(y). (161) In 3D, the effective diffusivity D_{e} is estimated as follows: \displaystyle D_{e}= \displaystyle D+\frac{1}{\Omega}\int_{\Omega}\mbox{d}\mathbf{r}\,[u_{x}f-D\partial_{x}f] \displaystyle= \displaystyle D+\frac{2}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{0}^{h(X)}dy\,y\left[u_{x}f-\frac{D}{L}\partial_{X}f\right]. (162) As in 2D, we write the general expansion \displaystyle D_{e}=D_{e}^{(0)}+L[D_{A}+D_{B}+D_{C}]+\mathcal{O}(L^{2}), (163) where the leading-order term is given by \displaystyle D_{e}^{(0)}=D+\frac{2}{\langle h^{2}\rangle} \displaystyle\int_{-1/2}^{1/2}\mbox{d}X\Bigg[\int_{0}^{a}dy\,yu_{x}^{(0)}f_{0}^{c} \displaystyle-D\int_{a}^{h(X)}dy\,y\partial_{X}f_{1}^{p}\Bigg], (164) where the above expression takes into account the fact that u_{x} vanishes in the peripheral region, while \partial_{X}f_{0}^{p}=\partial_{X}f_{0}^{c}=0 , and \partial_{X}f_{1}^{c} vanishes in the central region. The next-to-leading order components of the effective diffusivity read: \displaystyle D_{A}=\frac{2}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{0}^{a}dy\,y[u_{x}^{(0)}f_{1}^{c}+u_{x}^{(1)}f_{0}^{c}], (165) \displaystyle D_{B}=-\frac{2D}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}dy\,y\partial_{X}f_{2}^{p}, (166) \displaystyle D_{C}=-\frac{2Da}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{-\infty}^{\infty}dY[\partial_{X}f^{*}(X,Y)-\theta(Y)]. (167) Using Eqs. 152 , 154 and 157 , the integrals in the leading order term can be calculated, and we find that \displaystyle D_{e}^{(0)}=\frac{Da}{a+2\delta}+\frac{U^{2}a}{192D(a+2\delta)^{3}}\Bigg\{a^{4}+12a^{3}\delta \displaystyle+44a^{2}\delta^{2}+96\int_{a}^{h_{m}}dy\frac{\left(\int_{y}^{h_{m}}dy^{\prime}W(y^{\prime})y^{\prime}\right)^{2}}{W(y)y}\Bigg\}, (168) where we have defined \delta via the formula \displaystyle\langle h^{2}\rangle=a^{2}+2a\delta. (169) Next, the term D_{A} , defined in Eq. 165 , can be calculated by using the previously found expressions for f_{n} , leading to \displaystyle D_{A}=\beta U^{2} \displaystyle\frac{a^{3}\delta+8a^{2}\delta^{2}+24\int_{a}^{h_{m}}dy\frac{\left(\int_{y}^{h_{m}}dy^{\prime}W(y^{\prime})y^{\prime}\right)^{2}}{W(y)y})}{12D(a+2\delta)^{3}} \displaystyle-\frac{v_{0}}{\langle h^{2}\rangle}\langle Xh^{2}(X)\rangle. (170) Now, we evaluate the term D_{B} , which reads \displaystyle D_{B}= \displaystyle-\frac{2D}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\int_{a}^{h(X)}dy\,y\partial_{X}f_{2}^{p} \displaystyle= \displaystyle-\frac{2}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}dX\int_{a}^{h(X)}dy\,y \displaystyle\Bigg\{ \displaystyle\left[v_{0}-D\frac{1}{y}\partial_{y}(y\partial_{y}f_{0}^{p}(y))\right]X+\frac{1}{y}\partial_{y}G_{2}^{p}(y)\Bigg\}, (171) where we have used Eq. 161 . Integrating over y and noting that \int_{-1/2}^{1/2}dX\,X=0 we obtain \displaystyle D_{B}= \displaystyle-\frac{2}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}dX\Bigg\{G_{2}^{p}(h(X))-G_{2}^{p}(a)+ \displaystyle+ \displaystyle\left(\frac{v_{0}}{2}h^{2}(X)-Dh(X)(f_{0}^{p})^{\prime}(h(X))\right)X\Bigg\}. (172) We recall Eq. 138 , \displaystyle DXh(X)(f_{0}^{p})^{\prime}(h(X))= \displaystyle v_{0}\int_{-1/2}^{X}\mbox{d}w\,h^{\prime}(w)h(w)w+G_{2}^{p}(h(X)). (173) Using this equation, we obtain \displaystyle D_{B}= \displaystyle-\frac{2}{\langle h^{2}\rangle}\int_{-1/2}^{1/2}\mbox{d}X\Bigg\{\frac{v_{0}}{2}h^{2}(X)X \displaystyle-G_{2}^{p}(a)-v_{0}\int_{-1/2}^{X}\mbox{d}w\,h^{\prime}(w)h(w)w\Bigg\}. (174) Writing Eq. 173 for X=-1/2 and X=1/2 , we can show that \displaystyle G_{2}^{p}(a)=-\frac{v_{0}}{2}\int_{-1/2}^{1/2}\mbox{d}w\,h^{\prime}(w)h(w)w. (175) Next, using integrations by parts, we have \displaystyle\int_{-1/2}^{1/2}\mbox{d}X\int_{-1/2}^{X}\mbox{d}w\,h^{\prime}(w)h(w)w \displaystyle=-\int_{-1/2}^{1/2}\mbox{d}XX^{2}h^{\prime}(X)h(X)+\frac{1}{2}\int_{-1/2}^{1/2}\mbox{d}w\,h^{\prime}(w)h(w)w \displaystyle=\int_{-1/2}^{1/2}\mbox{d}X(2X)\frac{h^{2}(X)-a^{2}}{2}+\frac{1}{2}\int_{-1/2}^{1/2}\mbox{d}w\,h^{\prime}(w)h(w)w. (176) With these arguments we finally obtain \displaystyle D_{B}= \displaystyle\frac{v_{0}}{\langle h^{2}\rangle}\langle Xh^{2}(X)\rangle. (177) Last, the term D_{C} is almost the same as in the 2D case, and is given by \displaystyle D_{C}=\frac{Da\,2\ln 2}{\pi\,\langle h^{2}\rangle}. (178) We define \tau as the mean escape time out of a protrusion. Using the formulas of Ref. [ 56 ] , we identify this time as \displaystyle\tau= \displaystyle k_{d}^{-1}=\frac{2}{D\langle h^{2}-a^{2}\rangle}\int_{a}^{h_{m}}dy\frac{\left(\int_{y}^{h_{m}}dy^{\prime}W(y^{\prime})y^{\prime}\right)^{2}}{W(y)y} \displaystyle=\frac{1}{D\delta a}\int_{a}^{h_{m}}dy\frac{\left(\int_{y}^{h_{m}}dy^{\prime}W(y^{\prime})y^{\prime}\right)^{2}}{W(y)y}. (179) Using this value and the obtained expressions for D_{e}^{(0)},D_{A},D_{B},D_{C} , we conclude that the expression of the effective diffusivity in a strongly corrugated axisymmetric channel is given by the following formula, valid at next to leading order for small L : \displaystyle D_{e}= \displaystyle\frac{Da}{a+2\delta}+\frac{DL2\ln 2}{\pi\,(a+2\delta)} \displaystyle+\frac{U^{2}a^{2}\left(a^{3}+12a^{2}\delta+44a\delta^{2}+96D\tau\delta\right)}{192D\,(a+2\delta)^{3}} \displaystyle+\beta LaU^{2}\frac{a^{2}\delta+8a\delta^{2}+24D\delta\tau}{12D\,(a+2\delta)^{3}}. (180) This agrees with the results of Ref. [ 51 ] when one identifies \delta=k_{a}/k_{d} (when one neglects the slip velocity).