Revisiting convolutive blind source separation for identifying spiking motor neuron activity: From theory to practice Thomas Klotz, Robin Rohlén Abstract Objective: Identifying the spiking activity of alpha motor neurons (MNs) non-invasively is possible by decomposing signals from active muscles, e.g., obtained with surface electromyography (EMG) or ultrasound. The theoretical background of MN identification using these techniques is convolutive blind source separation (cBSS), in which different algorithms have been developed and validated. However, the existence and identifiability of inverse solutions and the corresponding estimation errors are not fully understood. In addition, the guidelines for selecting appropriate parameters are often built on empirical observations, limiting the translation to clinical applications and other modalities. Approach: We revisited the cBSS model for EMG-based MN identification, augmented it with new theoretical insights and derived a framework that can predict the existence of solutions for spike train estimates. This framework allows the quantification of source estimation errors due to the imperfect inversion of the motor unit action potentials (MUAP), physiological and non-physiological noise, and the ill-conditioning of the inverse problem. To bridge the gap between theory and practice, we used computer simulations. Main results: (1) Increasing the similarity of MUAPs or the correlation between spike trains increases the bias for detecting MN spike trains linked with high amplitude MUAPs. (2) The optimal objective function depends on the expected spike amplitude, spike amplitude statistics and the amplitude of background spikes. (3) There is some wiggle room for MN detection given non-stationary MUAPs. (4) There is no connection between MUAP duration and extension factor, in contrast to previous guidelines. (5) Source quality metrics like the silhouette score (SIL) or the pulse-to-noise ratio (PNR) are highly correlated with a source’s objective function output. (6) Considering established source quality measures, SIL is superior to PNR. Significance: We expect these findings will guide cBSS algorithm developments tailored for MN identification and translation to clinical applications. ∗ Those authors have equally contributed Keywords : motor unit, electromyography, ultrasound imaging, non-invasive, independent component analysis, skeletal muscle 1 Introduction Identifying the spiking activity of individual alpha motor neurons (MNs) non-invasively is possible by decomposing signals from activated muscles, e.g., obtained with multichannel surface electromyography (EMG) ( Holobar and Zazula 2007a ) or ultrasound ( Rohlén et al. 2020 ) . This indirect motor neuron identification from compound muscle activity is possible because each motor neuron innervates tens up to several hundreds of muscle fibres, amplifying the motor neuron activity on a one-to-one basis ( Heckman and Enoka 2012 ) . The motor neuron and all the muscle fibres it innervates are defined as a motor unit (MU). The activity of each MU can be modelled as a convolution of an impulse response (related to the muscle fibre activity) with the neural discharges of the motor neuron. Thus, template-matching ( De Luca et al. 2006 , Nawab et al. 2010 ) and convolutive blind source separation (BSS) ( Holobar and Zazula 2007b , Negro et al. 2016 ) are used to blindly estimate the discharges of a (sub)population of motor neurons. Although template-matching methods are effective for decomposing intramuscular EMG signals ( McGill et al. 2005 ) or under low force levels, these methods face challenges at higher force levels due to increased interference ( Zhou and Rymer 2004 ) . Convolutive BSS methods are reliable for extracting populations of motor neurons at low to high contraction levels ( Avrillon et al. 2024b ) . Although there are (slight) differences between state-of-the-art convolutive BSS-based motor neuron identification algorithms, they are built on the same theoretical background, most importantly, independent component analysis (ICA) ( Hyvärinen et al. 2001 ) . Four main steps summarise ICA-based motor neuron identification: 1) reformulate the convolutive mixture model to an instantaneous mixture model by adding delayed versions of the observations (referred to as the extension step), 2) decorrelate the extended data matrix through a whitening transformation, 3) source estimation by solving an optimisation problem, and 4) post-processing of estimated spike trains and projection vectors. The first three steps (extension, whitening, and optimisation algorithm) are well described in the seminal Independent Component Analysis (ICA) book published in Hyvärinen et al. 2001 by Hyvärinen et al. 2001 . The novelty of the EMG-based decomposition methods to generic convolution BSS methods lies in post-processing (fourth step). This includes spike clustering, source quality estimation and (manual) refinement of the predicted spike trains ( Negro et al. 2016 , Del Vecchio et al. 2020 , Avrillon et al. 2024a , e.g.,) . Although variants of convolutive BSS, e.g., gradient convolution kernel compensation (gCKC) ( Holobar and Zazula 2007b ) and fastICA ( Chen and Zhou 2015 , Negro et al. 2016 ) , are widely used and validated for the decomposition of surface EMG or ultrasound data, the selected parameters of the algorithms are often built on empirical observations rather than theory. Since surface EMG has been the first and still is the most important experimental modality for the non-invasive detection of motor neuron spike trains, many decomposition methods have been tailored for EMG signals. Yet, empirical observations, e.g., from the decomposition of ultrasound-based image sequences ( Lubel et al. 2024 , Rohlén et al. 2025 ) , challenge some assumptions and guidelines of algorithms used for motor neuron identification. A fundamental requirement for the application of ICA is mutually independent sources, which motor neuron spike trains violate due to having delayed sources in the extension step ( Farina and Holobar 2016 ) and common synaptic input(s). Nevertheless, independent motor neuron spike trains have been a widely used assumption in the literature for separation purposes ( Merletti et al. 2008 , Chen and Zhou 2015 , Meng et al. 2022 , Zheng et al. 2023 , Grison et al. 2024a , Clarke et al. 2024 ) . While ICA is known to be robust against modest violations of the independence assumption ( Hyvärinen and Oja 2000 ) , the independence violation has also been explicitly acknowledged for surface EMG decomposition ( Farina and Holobar 2016 ) . It has been argued that due to the sparsity of the MU spike trains, the sum of spike trains is more Gaussian than a single spike train, making non-Gaussianity (a common optimization goal in ICA) also a tractable choice for separating dependent but sparse sources. Indeed, sparse coding, that is, finding sparse representations in the data, is closely related to ICA ( Hyvärinen et al. 1998a , Hyvärinen et al. 1998b ) . Nevertheless, the role of latent source dependencies is not fully understood in convolutive BSS-based motor neuron identification methods. The decomposition problem is typically ill-conditioned. This means that the mixing matrix is not invertible, and even if the forward model is known, it is impossible to recover the activity of a complete motor neuron pool ( Klotz et al. 2023 , e.g.,) . Typically, low amplitude MUAPs (either due to size or depth) and MUs with non-unique MUAPs are considered non-detectable based on empirical rules ( Farina et al. 2008 , e.g.,) . The condition of the mixing matrix can theoretically be improved by treating non-detectable MUs as noise ( Farina and Holobar 2016 ) . However, the role of noise has received little attention in the existing literature. If noise is explicitly modelled, it is often assumed to be white Gaussian noise ( Chen and Zhou 2015 ) . Noise-correcting methods assuming white noise are considered in a few original method papers ( Holobar and Zazula 2007a , Negro et al. 2016 , Lubel et al. 2024 , e.g.,) by truncating the eigenvalues of the signal’s covariance matrix in the construction of the whitening matrix ( Belouchrani et al. 1997 ) . Yet, a white noise assumption is an oversimplification, particularly considering that non-detectable MUs are treated as noise. Thus, the existence and identifiability of inverse solutions and the corresponding estimation errors are not fully understood. Most EMG-based decomposition methods assume the mixing matrix is stationary ( Negro et al. 2016 ) . For surface EMG, this approximately holds for isometric and non-fatiguing contractions. In contrast, mechanically, like in ultrasound recordings, it is known that the twitch shapes may vary from spike to spike in isometric contractions ( Raikova et al. 2007 ) . Indeed, the ultrasound-based decomposition method can still identify the motor neuron discharges where the MU twitches cannot be considered stationary ( Rohlén et al. 2025 ) . Moreover, decomposition methods that can robustly handle non-stationarities are essential for many research questions in basic physiology and prosthetic control through neural interfaces. Therefore, the limits of the linear convolution BSS model in the presence of non-stationarities must be systematically characterised. Guidelines for EMG-based decomposition suggest that the impulse response duration must be shorter than the inter-spike interval ( Chen and Zhou 2015 ) . Although the mechanical impulse response after a neural discharge (MU twitch) is approximately 10 times longer than the electrical impulse response (MUAP) and at least two to three times larger than typical inter-spike interval durations ( McNulty et al. 2000 , Raikova et al. 2008 ) , a convolutive BSS method applied to sequences of ultrasound images could still identify motor neuron spike trains ( Lubel et al. 2024 ) . This example demonstrates that the guidelines for selecting appropriate decomposition parameters must be refined. This study aims to update the understanding of the EMG-based convolutive BSS method for motor neuron identification. We summarize state-of-the-art convolution BSS methods used for motor neuron identification and derive new theoretical tools that allow studying the existence and identifiability of physiological solutions given the convolutive BSS problem. The theory is underlined by computer simulations combining a realistic motor neuron pool model and a database of MUAPs extracted from experimental recordings. In this way, we intend to bridge the gap from theory to application, which is important for translating motor neuron identification methods to other signal modalities like ultrasound and clinical applications. 2 Theory 2.1 The convolutive mixture model A multichannel EMG signal can be described as a linear convolution mixture, i.e., x_{i}(t)\ =\ \sum_{j=1}^{N}\sum_{l=0}^{L-1}h_{ij}(l)s_{j}(t-l)\,+\,\varepsilon_{i}(t)\ , (1) where x_{i}(t) (with i=1,...,M and t=0,...,T ) denotes the i th channel of the EMG signal with M electrodes, and t denotes a discrete time frame with T+1 being the total number of samples. The impulse response of the j th MU, i.e., the motor unit action potential (MUAP), at the i th channel is given by h_{ij}(l) , where L denotes the number of discrete samples of the impulse responses and N is the number of active MUs in the EMG signal. Further, \varepsilon_{i} denotes additive noise. The spike train for the j th MU is defined as s_{j}(t)=\sum_{r\in\mathcal{S}_{j}}\delta(t-t_{j}^{r}), (2) where \mathcal{S}_{j}:=\{t_{j}^{1},...,t_{j}^{T_{j}}\} is the set of discharge times of the j th MU and \delta(\cdot) is the Dirac delta function. Equation ( 1 ) can be rephrased in matrix form, i.e., \mathbf{x}(t)\ =\ \sum_{l=0}^{L-1}\mathbf{H}(l)\mathbf{s}(t-l)\ +\ \bm{\varepsilon}(t), (3) where \mathbf{x}(t)=[x_{1}(t),x_{2}(t),...,x_{M}(t)]^{T} , \mathbf{s}(t)=[s_{1}(t),s_{2}(t),...,s_{N}(t)]^{T} , and \mathbf{H}(l) has size M\times N and contains the l th sample of MUAPs for the N MUs and M channels. A convolutive mixture with finite impulse response filters can be represented as a linear instantaneous mixture in the time domain. This is achieved by defining an extended vector of sources and observations, each including the original sources or observations and their delayed versions ( Hyvärinen et al. 2001 ) . This yields \begin{split}\mathbf{\tilde{x}}(t)\ &=\ \mathbf{\tilde{H}}\mathbf{\tilde{s}}(t)\,+\,\bm{\tilde{\varepsilon}}(t)\ ,\ \text{with}\\[8.53581pt] \mathbf{\tilde{H}}\ &=\ \begin{bmatrix}\mathbf{\tilde{H}}_{11}&\cdots&\mathbf{\tilde{H}}_{1N}\\ \vdots&\ddots&\vdots\\ \mathbf{\tilde{H}}_{M1}&\cdots&\mathbf{\tilde{H}}_{MN}\\ \end{bmatrix},\\[5.69054pt] \mathbf{\tilde{x}}(t)\ &=\ [\mathbf{\tilde{x}}_{1}(t),\mathbf{\tilde{x}}_{2}(t),...,\mathbf{\tilde{x}}_{M}(t)]^{T}\ ,\\[2.84526pt] \mathbf{\tilde{s}}(t)\ &=\ [\mathbf{\tilde{s}}_{1}(t),\mathbf{\tilde{s}}_{2}(t),...,\mathbf{\tilde{s}}_{N}(t)]^{T}\ ,\\[2.84526pt] \bm{\tilde{\varepsilon}}(t)\ &=\ [\bm{\tilde{\varepsilon}}_{1}(t),\bm{\tilde{\varepsilon}}_{2}(t),...,\bm{\tilde{\varepsilon}}_{M}(t)]^{T}\ ,\\ \end{split} (4) where the block matrices or vectors are given by \begin{split}\mathbf{\tilde{H}}_{ij}\ &=\ \begin{bmatrix}h_{ij}(0)&\cdots&h_{ij}(L-1)&0&\cdots&0\\ 0&\ddots&\ddots&\ddots&\ddots&\vdots\\ \vdots&\ddots&\ddots&\ddots&\ddots&0\\ 0&\cdots&0&h_{ij}(0)&\cdots&h_{ij}(L-1)\\ \end{bmatrix}\ ,\\[5.69054pt] \mathbf{\tilde{x}}_{i}(t)&=[x_{i}(t),x_{i}(t-1),\ldots,x_{i}(t-R)]\ ,\\[2.84526pt] \mathbf{\tilde{s}}_{j}(t)&=[s_{j}(t),s_{j}(t-1),\ldots,s_{j}(t-L-R+1)]\ ,\\[2.84526pt] \bm{\tilde{\varepsilon}}_{i}(t)&=[\varepsilon_{i}(t),\varepsilon_{i}(t-1),\ldots,\varepsilon_{i}(t-R)]\ .\\ \end{split} (5) The mixing model in Equation ( 5 ) is typically ill-conditioned. Thus, the activity of a full motor neuron pool cannot be reconstructed even when the forward mixing model is known ( Klotz et al. 2023 , e.g.,) . Treating non-detectable sources as part of the additive noise ( Negro et al. 2016 , Farina and Holobar 2016 ) , we get: \begin{split}\mathbf{\tilde{x}}(t)\ &=\ \mathbf{\tilde{H}}_{:,j_{\mathcal{D}}}\,\mathbf{\tilde{s}}_{j_{\mathcal{D}}}(t)\,+\,\mathbf{\tilde{H}}_{:,j_{\mathcal{N}}}\mathbf{\tilde{s}}_{j_{\mathcal{N}}}(t)\,+\,\bm{\tilde{\varepsilon}}(t)\ ,\\ &=\ \mathbf{\tilde{H}}_{:,j_{\mathcal{D}}}\,\mathbf{\tilde{s}}_{j_{\mathcal{D}}}(t)\,+\,\bm{\tilde{\varepsilon}}^{\prime}(t)\ .\end{split} (6) Therein, \mathbf{\tilde{H}}_{:,j} is the j th column of block matrix \mathbf{\tilde{H}} and \mathbf{\tilde{s}}_{j} is the j th row of the block vector \mathbf{\tilde{s}} . Further, \mathcal{D}:=\{j_{\mathcal{D}}^{1},...,j_{\mathcal{D}}^{N_{\mathcal{D}}}\} is the set of detectable sources, with column indices j_{\mathcal{D}} , and \mathcal{N}:=\{j_{\mathcal{N}}^{1},...,j_{\mathcal{N}}^{N_{\mathcal{N}}}\} is the set of non-detectable sources, with column indices j_{\mathcal{N}} . The total number of (potentially delayed) sources is R\cdot N=N_{\mathcal{D}}+N_{\mathcal{N}} , with N_{\mathcal{D}} or N_{\mathcal{N}} denoting the number of detectable and non-detectable sources, respectively. 2.2 The inverse problem The goal of decomposing EMG signals is to estimate the (detectable) motor neuron spike trains only given the extended observation matrix. Most state-of-the-art convolution BSS-based decomposition algorithms can be classified as variants of ICA. In this section, we revisit the fundamentals of ICA to derive new theoretical insights into the performance of motor neuron identification algorithms. 2.2.1 Preconditioning In the attempt to solve the inverse problem, it is common to conduct a few pre-processing steps. This includes, if possible, rejecting parts of the noise, e.g., using bandpass or notch filters. Due to the linearity of the mixing model (cf. Equation 4 ), only linear pre-processing steps should be conducted ( Hyvärinen et al. 2001 ) . Next, the extended observations are centred by subtracting the (sample) mean from the extended observations. Then, a whitening transformation is applied \mathbf{\tilde{z}}(t)\ =\ \mathbf{V}\mathbf{\tilde{x}}(t)\ , (7) where the whitening matrix \mathbf{V} is constructed such that the covariance matrix of extended and whitened observations \mathbf{\tilde{z}}(t) is the identity matrix, i.e., \mathbf{C}_{\tilde{z}\tilde{z}}=\mathbf{I} . Note that the whitening transformation is always possible; however, it is not unique. Popular choices are principal component analysis (PCA) or zero-phase component analysis (ZCA) whitening, where the whitening matrix is constructed from the eigendecomposition of the extended signal’s covariance matrix ( Krizhevsky 2009 ) . Practically, one needs to empirically estimate the covariance matrix given the extended observations. It turns out useful to decompose the covariance matrix of the extended signal in Equation ( 6 ) into ( Hyvärinen et al. 2001 , e.g.,) \mathbf{C}_{\mathbf{\tilde{x}}\mathbf{\tilde{x}}}\ =\ \mathbb{E}\left[\mathbf{\tilde{x}}(t)\mathbf{\tilde{x}}^{T}(t)\right]\ =\ \mathbf{\tilde{H}}_{:,j_{\mathcal{D}}}\mathbf{C}_{\mathbf{\tilde{s}}_{j_{\mathcal{D}}}\mathbf{\tilde{s}}_{j_{\mathcal{D}}}}\mathbf{\tilde{H}}_{:,j_{\mathcal{D}}}^{T}\,+\,\mathbf{C}_{\mathbf{\tilde{\varepsilon}^{\prime}}\mathbf{\tilde{\varepsilon}^{\prime}}}\ . (8) Therein, \mathbf{C}_{\mathbf{\tilde{x}}\mathbf{\tilde{x}}} denotes the covariance matrix of the extended observations, \mathbf{C}_{\mathbf{\tilde{s}}_{j_{\mathcal{D}}}\mathbf{\tilde{s}}_{j_{\mathcal{D}}}} is the covariance matrix of the extended detectable sources and \mathbf{C}_{\mathbf{\tilde{\varepsilon}^{\prime}}\mathbf{\tilde{\varepsilon}^{\prime}}} is the covariance matrix of the extended noise including the non-detectable MUs. Further, \mathbb{E}(\cdot) denotes the expectation operator. The whitening transformation (attempts to) orthogonalise the mixing matrix and decreases the number of parameters to be estimated approximately by a factor of two ( Hyvärinen and Oja 2000 ) . Moreover, as the inverse of an orthogonal matrix is its transpose, one can construct the inverse mixing matrix column-by-column. Thus, the k th spike train is then estimated by applying a suitable projection vector \mathbf{w}_{k}^{T} to the extended and whitened observations: \widehat{\tilde{s}}_{k}(t)\ =\ \mathbf{w}_{k}^{T}\mathbf{\tilde{z}}(t)\ . (9) Therein \widehat{\tilde{s}}_{k}(t) is the estimate of the k th detectable spike train. We will require \mathbf{w}_{k} as a unit vector for the following investigations. In the literature, the spike estimation is sometimes conducted in the non-whitened space ( Holobar and Zazula 2007a , Farina and Holobar 2016 , e.g.,) . It can be shown (see A.1 ) that this approach is equivalent to Equation ( 9 ). 2.2.2 Existence of an inverse solution Inserting Equations ( 6 ) and ( 7 ) into Equation ( 9 ), the estimate of the k th spike train (with delay l ) can be expressed in terms of a dot product. In detail, the projection vector is applied to each column of the extended and whitened mixing matrix weighted by the corresponding source activity (i.e., a sequence of ones and zeros) and the noise. We obtain \begin{split}\widehat{\tilde{s}}_{k}(t)\ &=\ \mathbf{w}_{k}^{T}\left(\mathbf{V}\mathbf{\tilde{H}}_{:,j_{\mathcal{D}}}\,\mathbf{\tilde{s}}_{j_{\mathcal{D}}}(t)\,+\mathbf{V}\mathbf{\tilde{H}}_{:,j_{\mathcal{N}}}\,\mathbf{\tilde{s}}_{j_{\mathcal{N}}}(t)\,+\,\mathbf{V}\bm{\tilde{\varepsilon}}(t)\right)\\ &=\ \Big\langle\mathbf{w}_{k}\ ,\ \tilde{s}_{kl}(t)\mathbf{\tilde{h}}_{kl}\,+\!\!\!\sum_{(j,l)\in\mathcal{M}}\!\!\tilde{s}_{jl}(t)\mathbf{\tilde{h}}_{jl}\,+\,\bm{\tilde{\varepsilon}}^{\mathrm{w}}(t)\Big\rangle\\ &=\ \widehat{\tilde{s}}{}_{k}^{(k,l)}(t)\,+\!\!\!\sum_{(j,l)\in\mathcal{M}}\!\!\widehat{\tilde{s}}{}_{k}^{(j,l)}(t)\,+\,\varepsilon_{k}(t)\ ,\end{split} (10) where \tilde{s}_{ul}(t) denotes the l th delayed spike train of MU u (with u denoting an arbitrary MU) and the set \mathcal{M} includes all sources with indices (j,l)\neq(k,l) . Further, \widehat{\tilde{s}}{}_{k}^{(k,l)}(t) is the contribution of MU k (with delay l ) to the estimated spike strain, \widehat{\tilde{s}}{}_{k}^{(j,l)}(t) are background spikes due to the activity of other (delayed) sources and \varepsilon_{k}(t) is the projected noise. The columns of the extended and whitened mixing matrix \mathbf{\tilde{h}}_{ul} are given by \begin{split}\mathbf{\tilde{h}}_{ul}=\mathbf{V}\mathbf{\tilde{H}}_{:,u}(:,l)\ =\ \mathbf{V}\Big[&h_{1u}(l+R-1),\,...\,,h_{1u}(l)\,,\,...\,,\\ &\qquad h_{Mu}(l+R-1),\,...\,,h_{Mu}(l)\Big]^{T}\ ,\end{split} (11) with 0\leq l\leq L+R-1 . Finding an inverse solution for the spike train of MU k with delay l (i.e., a reconstruction of \tilde{s}_{kl}(t) ) requires the existence of a projection vector \mathbf{w}_{k} such that the term \widehat{\tilde{s}}{}_{k}^{(k,l)}(t) in Equation ( 10 ) dominates. When the sources are (sufficiently) uncorrelated, the expected value of the reconstructed spike train \widehat{\tilde{s}}_{k}(t) when a source is activated (i.e., \tilde{s}_{ul}(t)=1 ) can be calculated by the dot product between the projection vector \mathbf{w}_{k} and the columns of the whitened and extended mixing matrix \mathbf{\tilde{h}}_{ul} . Given that the projection vector \mathbf{w}_{k} is a unit vector we obtain \mathbb{E}\Big(\widehat{\tilde{s}}_{k}(t\in\mathcal{S}_{u})\Big)\ =\ \langle\mathbf{w}_{k},\mathbf{\tilde{h}}_{ul}\rangle\ =\ S_{\mathrm{cos}}^{k,ul}\cdot||\mathbf{\tilde{h}}_{ul}||\ =\ \rho_{k}^{(u,l)}\ , (12) where S_{\mathrm{cos}}^{k,ul} is the cosine similarity between \mathbf{w}_{k} and \mathbf{\tilde{h}}_{ul} , and ||\cdot|| denoting the norm of an arbitrary vector. Note that the cosine similarity between two vectors is one if the vectors are aligned (i.e., parallel) and zero if the vectors are orthogonal. Further, \mathcal{S}_{u}:=\{t_{u}^{1},...,t_{u}^{T_{u}}\} is the set of spike times of the u th source with delay l . The amplitude of the spike of interest becomes maximal if \mathbf{w}_{k}=\mathbf{\tilde{h}}_{kl}\,/\,||\mathbf{\tilde{h}}_{kl}|| (i.e., S_{\mathrm{cos}}^{k,kl}=1 ) and l is chosen such that the norm of the selected column is maximal (i.e., \operatorname{arg\ max}||\mathbf{\tilde{h}}_{kl}|| , with 0\ \lambda\cdot\sigma_{\mathrm{n}}\ . (15) Therein, \lambda is the desired uncertainty bound describing how many standard deviations the expectation of the peaks of interest is above the highest background peak. 2.2.3 Identifiability of an inverse solution The blind identification of the (delayed) sources in Equation ( 6 ) is a linear BSS problem ( Hyvärinen et al. 2001 ) . The fundamental assumptions for using ICA to solve a BSS problem are 1) linear superposition of the observations, 2) the prior of the sources, and 3) the joint prior of the sources being factorial (i.e., statistical independence). When the sources are uncorrelated (approximately achieved through the whitening transformation, cf. Section 2.2.1 ), non-Gaussian sources are sufficient ( Hyvärinen et al. 1998a ) . One can thus blindly estimate the inverse mixing matrix by searching for projection vectors \mathbf{w}_{k} (with ||\mathbf{w}_{k}||=1 ) predicting maximally non-Gaussian sources. In detail, we define an objective function \begin{split}L(\mathbf{w}_{k})\ &=\ \sum_{t}\mathbb{E}\Big(G(\mathbf{w}_{k}^{T}\mathbf{\tilde{z}}(t))\Big)\ =\ \sum_{t}\mathbb{E}\Big(G(\widehat{\tilde{s}}_{k}(t)\Big)\ ,\end{split} (16) where G(\cdot) is an arbitrary non-linear and non-quadratic function. A popular choice is statistical moments of order higher than two (e.g., skewness or kurtosis). Finding an optimum of Equation ( 16 ) requires an optimisation algorithm, e.g., the (natural) gradient descent or an approximated Newton solver (as done in fastICA). To study the given optimisation problem, we split up the sum term in Equation ( 16 ) into the spikes of an MU of interest (with delay l ), another MU highlighted by the separation vector \mathbf{w}_{k} and the projected noise. Assuming that the expected amplitude at the spikes is \rho_{k}^{(u,l)}=S_{\mathrm{cos}}^{k,ul}||\mathbf{\tilde{h}}_{ul}|| (see Equation 12 ) and that the expected value of the noise is zero, the expectation in each term is approximated by a Taylor series (see A.2 ) to obtain \begin{split}L(\mathbf{w}_{k})\ &=\ \sum_{t\in\mathcal{S}_{k}}\mathbb{E}\Big[G\Big(\widehat{\tilde{s}}_{k}(t)\Big)\Big]\,+\,\sum_{t\in\mathcal{S}_{j}}\mathbb{E}\Big[G\Big(\widehat{\tilde{s}}_{k}(t)\Big)\Big]\,+\ \sum_{t\in\mathcal{S_{N}}}\mathbb{E}\Big[G\Big(\widehat{\tilde{s}}_{k}(t)\Big)\Big]\\ &=\ T_{k}\Bigg(G\left(\rho_{k}^{(k,l)}\right)+G^{\prime\prime}\left(\rho_{k}^{(k,l)}\right)\frac{\sigma_{k}^{2}}{2}\,+G^{(3)}\left(\rho_{k}^{(k,l)}\right)\frac{\gamma_{1}^{k}\sigma_{k}^{3}}{6}\,+\,...\Bigg)\\ &\,+\,T_{j}\Bigg(G\left(\rho_{k}^{(j,l)}\right)+G^{\prime\prime}\left(\rho_{k}^{(j,l)}\right)\,\frac{\sigma_{j}^{2}}{2}+G^{(3)}\left(\rho_{k}^{(j,l)}\right)\frac{\gamma_{1}^{j}\sigma_{j}^{3}}{6}\,+\,...\Bigg)\\ &\,+\,T_{\mathcal{N}}\Bigg(G(0)+G^{\prime\prime}(0)\frac{\sigma_{\mathcal{N}}^{2}}{2}+G^{(3)}\left(0\right)\frac{\gamma_{1}^{\mathcal{N}}\sigma_{\mathcal{N}}^{3}}{6}\,+\,...\Bigg)\,+\,\mathcal{O}(s^{4})\ .\end{split} (17) where \sigma denotes the standard deviation and \gamma_{1} denotes the skewness. Moreover, \mathcal{S}_{k}:=\{{t^{1}_{k},...,t_{k}^{T_{k}}}\} are the spikes of MU k (with delay l ) and \mathcal{S}_{j}:=\{t_{j}^{1},...,t_{j}^{T_{j}}\} are the spikes of MU j (with delay l ). Lastly, \mathcal{S_{N}}:=\{{t^{1}_{\mathcal{N}},...,t_{\mathcal{N}}^{T_{\mathcal{N}}}}\} denote all time points associated with noise. It can be seen that a local optimum of L(\mathbf{w}_{k}) is equivalent to learning a column of the extended and whitened mixing matrix if the zero-order term associated with MU k (with delay l ) dominates, i.e., \mathbf{w}_{k}\xrightarrow{}\alpha\,\mathbf{\tilde{h}}_{kl} , where \alpha is an arbitrary scaling parameter. However, (local) maxima of the objective function can potentially be associated with maximizing any other term in Equation ( 17 ). This means that physiologically spurious projection vectors \mathbf{w}_{k} are part of the mathematical solution space, making interpreting decomposition results challenging. For example, the objective function will further increase if at least one additional MU is sensitive to \mathbf{w}_{k} . A projection vector associated with a maximum can thus become a mixture of two (or more) sources. Further, the objective function rewards noisy spike trains and outlier spikes due to the higher-order terms in Equation ( 17 ), which can cause overfitting to these time instances. Figure 1: ( A ) Source contrast between two motor units (MUs) after applying a non-linear function G(s) . The colours show different relative peak separation values (SEP). ( B ) Learning goodness is quantified as the ratio between the zero-order term and the overall contribution of the peak cluster to the objective function. The colours show different spike amplitudes (relative to the standard deviation \sigma ). The upper bound is up to the second-order term; the lower bound is up to the fourth-order term. ( C ) The optimal non-linearity corresponds to the maximum of the product between the source contrast and the learning weight. Here, we assumed \text{SEP}=0.5 . A suitable choice of non-linearity can maximize the contrast between MUs with similar extended and whitened MUAPs and limit the influence of overfitting. To illustrate the influence of the selected non-linearity G(\cdot) , we will investigate the class of arbitrary power functions G(s)\ =\ \operatorname{sgn}(s)\cdot|s|^{a}\ , (18) where the exponent a\in\mathbb{R} is an adjustable parameter and \operatorname{sgn}(s) denotes the signum function. We showcase the influence of the objective function on the identifiability of MUs through a series of simple examples. First, we consider two MUs and vary the relative peak separation (SEP) from 0.1 to 0.9 (Figure 1 A). It can be observed that in the case where the relative peak separation is close to one, the specific choice of a is not critical as the source contrast, i.e., the normalized difference between the non-linearity applied to the spike amplitude and the non-linearity applied to the background spike amplitude, quickly approaches one. In the challenging case where SEP approaches zero, a suitable choice of G(\cdot) can be essential to provide sufficient contrast between the spikes of different MUs. Here, increasing the exponent a improves the separation (Figure 1 A). Practically, the degree of the selected non-linearity is bounded by the higher-order terms (i.e., noise or outlier spikes). This is illustrated by considering a spike train with 300 discharges with an amplitude of 3, 5, or 10 times the spike amplitude’s standard deviation. To consider the effect of higher-order terms (i.e., larger than two), we assume that there exists one outlier spike with an amplitude of 150\text{\,}\% of the mean spike amplitude. Figure 1 B shows the learning weight, i.e., the relative contribution of the zero-order term of the peak cluster to the overall value of the objective function, depending on the variability of the spikes amplitudes and the presence of outlier spikes. The upper bound only considers the effect of the variance of the spike amplitudes (i.e., the second-order term). The lower bound values consider terms up to an order of four. Robust decomposition requires a learning weight close to one. It is observed that the decay of the learning weight depends on the amplitude, the variability and higher-order statistical moments of the spikes. As a criterion for the optimal exponent, we consider the product between the source contrast and the learning weight. In Figure 1 C, this is illustrated by considering a relative peak separation of 0.5. It is observed that the optimal non-linearity is a compromise between spike contrast and limiting errors due to overfitting. Thereby, the optimal exponent a increases when the normalized spike amplitude (relative to the spike variance) increases and the relative peak separation decreases. For example, the optional exponents are 1.91 (amplitude: 3\,\sigma , \text{SEP}=0.7 ), 3.12 (amplitude: 5\,\sigma , \text{SEP}=0.5 ) or 5.53 (amplitude: 10\,\sigma , \text{SEP}=0.3 ). Lastly, we note that a typical non-physiological solution in ICA-based source estimates is a single spike. A.3 provides a condition on how single spike solutions are related to the selected non-linearity G(s) . 2.3 Spike clustering and source quality metrics The final step in the decomposition is extracting the motor neuron discharge times from the reconstructed sources. Although not strictly necessary, spike clustering is often achieved after applying a non-linear function F(s) , similar to the objective function given in Equation ( 16 ), to the k th reconstructed spike train: \varphi^{k}(t)=F(\widehat{\tilde{s}}_{k}(t))\ . (19) A common choice is the asymmetrical power law given in Equation ( 18 ) with an exponent of a=2 . Typically, first, a peak finding algorithm is applied to \varphi^{k}(t) , followed by a clustering algorithm (e.g., K-means) aiming to separate the spikes associated with the activity of MU k from (potential) false positive spikes. A fundamental challenge is quantifying the goodness of the extracted binary spike train without knowing the ground truth. The most prominent examples of such source quality metrics are the silhouette (SIL) score ( Negro et al. 2016 ) and the pulse-to-noise ratio (PNR) ( Holobar et al. 2014 ) . The SIL score for the k th MU source is defined as \mathrm{SIL}^{k}\ =\ \frac{\sum\limits_{i\in\mathcal{S}_{\mathrm{p}}}\Big(\varphi^{k}(t_{i})-\mu_{\mathrm{p}}\Big)^{2}-\sum\limits_{i\in\mathcal{S}_{\mathrm{p}}}\Big(\varphi^{k}(t_{i})-\mu_{\mathrm{n}}\Big)^{2}}{\max\left\{\sum\limits_{i\in\mathcal{S}_{\mathrm{p}}}\Big(\varphi^{k}(t_{i})-\mu_{\mathrm{p}}\Big)^{2},\sum\limits_{i\in\mathcal{S}_{\mathrm{p}}}\Big(\varphi^{k}(t_{i})-\mu_{\mathrm{n}}\Big)^{2}\right\}}\ \ . (20) Therein, \mathcal{S}_{\mathrm{p}}:=\{t^{1}_{\mathrm{p}},...,t_{\mathrm{p}}^{N_{\mathrm{p}}}\} is the set of discharge times of MU k (cf. Equation 2 ), with an expected spike amplitude of \mu_{\mathrm{p}}=\mathbb{E}[\varphi(t_{i})] . Further, \mu_{\mathrm{n}}=\mathbb{E}[\varphi(t_{j})] is the expected amplitude of spikes classified as false spikes. From Equation ( 13 ), it can be seen that MU identification is only possible if \mu_{\mathrm{p}}>\mu_{\mathrm{n}} . Hence, without loss of generality, we can rewrite the SIL value in terms of the expected values \mathrm{SIL}^{k}\ =\ \frac{\mathbb{E}\big[(\varphi^{k}(t_{i})-\mu_{\mathrm{p}})^{2}\big]-\mathbb{E}\big[(\varphi^{k}(t_{i})-\mu_{\mathrm{n}})^{2}\big]}{\mathbb{E}\big[(\varphi^{k}(t_{i})-\mu_{\mathrm{n}})^{2}\big]}\ =\ \frac{(\mu_{\mathrm{p}}-\mu_{\mathrm{n}})^{2}}{\sigma_{\mathrm{p}}^{2}+(\mu_{\mathrm{p}}-\mu_{\mathrm{n}})^{2}}\ \ , (21) where \sigma_{\mathrm{p}}^{2}=\mathbb{E}[(\varphi(t_{i})-\mu_{\mathrm{p}})^{2}] is the variance of spikes belonging to MU k . Often, a SIL value larger than 0.9 is considered an indicator of robust source identification ( Negro et al. 2016 ) . Equation ( 21 ) illustrates that a SIL value of 0.9 approximately corresponds to the case where the peak and noise clusters are separated by 3 standard deviations of \varphi(t_{i}) . However, it does not reflect the variability of the background spikes and the effect of higher-order statistics and hence has limited sensitivity to false positive and negative rates, particularly in the presence of outlier spikes. The PNR for the k MU source is defined as \mathrm{PNR}^{k}\ =\ 10\cdot\log_{10}\left(\frac{\mathbb{E}[\varphi^{k}(t_{i})^{2}]}{\mathbb{E}[\varphi^{k}(t_{j})^{2}]}\right)\, (22) where t_{j} denotes all time frames not associated with the activity of MU k . Further, note that in practice, t_{i} often also includes samples in close neighbourhoods to the actual spike (e.g. \pm 1 sample). Using \varphi^{k}(t)=\operatorname{sgn}(\widehat{\tilde{s}}_{k}(t))\cdot\widehat{\tilde{s}}_{k}(t)^{2} , PNR is the ratio of the contribution of the spike cluster and the noise cluster (background peaks and noise) given a 4 th order objective function (i.e., kurtosis). However, PNR provides limited insights into the false negative and the false positive rate (see Figure 3 B-C). 3 In silico experiments We performed in silico experiments to study the convolutive BSS-based MU identification systematically. Motor neuron spike trains are simulated using a leaky integrate and fire model. EMG signals are simulated by convolving the motor neuron spike trains with experimentally extracted MUAPs. 3.1 Motor neuron pool model We considered a leaky integrate and fire model to model a pool of motor neurons. This approach offers an attractive trade-off between simplicity and capturing many important neuronal characteristics. The evolution of the j th motor neuron’s membrane potential V_{j}(t) at time t is given by \tau_{j}\frac{dV_{j}(t)}{dt}=\begin{cases}&0\qquad\qquad\qquad\qquad\qquad\qquad,\ \text{for}\ \ t\in[t^{\mathrm{s}}_{j},t^{\mathrm{s}}_{j}+t_{j}^{\mathrm{ref}}]\\ &-g_{j}^{\mathrm{L}}\Big(V_{j}(t)-V_{\mathrm{r}}\Big)\,+\,g_{j}^{\mathrm{E}}R_{j}I_{j}(t)\ ,\ \text{otherwise}.\\ \end{cases} (23) With the additional rules, that (i) a spike t_{j}^{\mathrm{s}} of the j th motor neuron is recorded when V_{j}(t)\geq V_{\mathrm{th}} , with V_{\mathrm{th}} denoting the threshold potential, and (ii) at each spike the membrane potential is reset to the resting potential V_{\mathrm{r}} for a refractory period t_{j}^{\mathrm{ref}} , i.e., where the neuron cannot depolarize, which depend on the size of the motor neuron. We used the initial condition V_{j}(0)=V_{\mathrm{r}} . Further, R_{j} is the membrane resistance for the j th motor neuron, I_{j}(t) is the synaptic input for the j th motor neuron at time t , \tau_{j} is a membrane time constant for the j th motor neuron. Finally, g_{j}^{\mathrm{L}} and g_{j}^{\mathrm{E}} are gain parameters for the leakage and the excitability of the membrane. The evolution of the membrane potential (i.e., Equation 23 , excluding the refractory times) was computed using an explicit Euler method. The model parameters (see B.1 ) were extracted from experimental animal models ( Caillet et al. 2022 ) , i.e., the membrane resistances (Figure 2 A), membrane constants (Figure 2 B) and refractory times (Figure 2 C). The selected values provided realistic frequency-current behaviour for a large range of input currents, with the early recruited motor neurons showing frequency saturation (Figure 2 D). Figure 2: Parameters of the leaky integrate and fire model depending on motor neuron (MN) size, i.e., the membrane resistances ( A ), membrane time constants ( B ), and refractory times ( C ). Firing rate for the exemplary selected motor neurons as a function of input current ( D ). 3.2 Synaptic input The synaptic input I_{j}(t) to each motor neuron comprised common excitatory input, common noise, and independent noise ( Negro and Farina 2011 , Röhrle et al. 2019 , e.g.,) . The common excitatory drive was prescribed as a trapezoidal signal ( 10\text{\,}\mathrm{s} ramping up, 40\text{\,}\mathrm{s} plateau and 10\text{\,}\mathrm{s} ramping down). The common and independent noise was modelled as coloured Gaussian noise in the 1535\text{\,}\mathrm{H}\mathrm{z} and 0100\text{\,}\mathrm{H}\mathrm{z} bands using a second-order zero-phase Butterworth filter. To obtain a coefficient of variation (CoV) for the inter-spike intervals of approximately 15\text{\,}\% , unless specified differently, the coefficient of variation (i.e., the standard deviation of the noise divided by the mean drive in the plateau phase) was 20\text{\,}\% for the common noise and 5\text{\,}\% for the independent noise. Finally, the input I_{j}(t) to each motor neuron was a linear combination of the three components. To quantify the independence of spike trains, we first computed the covariance between all pairs of spike trains. Next, we computed a spike independence coefficient as the ratio between the sum of the diagonal entries divided by the sum of all elements of the spike train covariance matrix. A value of 1 is equivalent to statistically independent spike trains. Lower values indicate dependencies between spike trains. 3.3 EMG simulation EMG signals were simulated by convolving MUAPs extracted from experimental recordings with the simulated motor neuron spike trains (see Equation 1 ). Further, we added coloured Gaussian noise with a bandwidth of 20500\text{\,}\mathrm{H}\mathrm{z} (using a third-order, zero-phase Butterworth filter) to obtain signal-to-noise ratios (SNR) ranging from 1030\text{\,}\mathrm{d}\mathrm{B} . In detail, we extracted a library of MUAPs from the tibialis anterior muscle together with the recruitment thresholds of the motor neurons (in terms of maximum voluntary isometric contractions, MVC) from an existing dataset ( Avrillon et al. 2024b , Avrillon 2023 ) . In that study, 256 electrodes (2x2 64-electrode grids; type: OT Bioelettronica GR04MM1305; inter-electrode distance: 4\text{\,}\mathrm{m}\mathrm{m} ) were used to cover the tibialis anterior muscle, enabling the identification of an extensive number (129 \pm 44 per subject, n=8 ) of spike trains across 10 to 80\text{\,}\% of MVC. The MUAPs were extracted from multichannel surface EMG signals using spike-triggered averaging with a \pm 25\text{\,}\mathrm{m}\mathrm{s} window of each of the provided spike trains. Since the edge samples of the spike-triggered averaged MUAPs resulted in non-zero values, we multiplied it with a Tukey window (cosine fraction 0.1) to ensure compact support. Moreover, since the number of MUAPs for the first two subjects (187 and 194) was well above the number of motor neurons used in the motor neuron model, we randomly sampled 300 out of the 381 MUAPs and their recruitment thresholds for convolving with the motor neuron spike trains for surface EMG signal generation. While the experimental data ( Avrillon et al. 2024b ) contains measurements from 4 EMG arrays (64 channels per grid), for the simulations, we only considered 64 channels from one grid (default setting: laterodistal grid). To vary the MUAP similarity systematically, we first spatially interpolated the MUAPs linearly to obtain a virtual inter-electrode distance of 1\text{\,}\mathrm{m}\mathrm{m} . This allowed us to spatially shift the interpolated MUAPs (in steps of 1\text{\,}\mathrm{m}\mathrm{m} ) and finally evaluate these artificial MUAPs on the original grid. To quantify the spatio-temporal similarity of MUAPs (i.e., considering the data from all channels and each time frame in an integrative sense), we computed for each pair of MUAPs the energy similarity ( Farina et al. 2008 ) . That is, the mean square difference between two (spatio-temporal) MUAPs normalized to the mean of the energies of the two MUAPs: S_{\mathrm{Energy}}^{k,j}\ =\ \frac{\sum\limits_{i}^{M*L}\Big(\hat{\mathbf{h}}_{k}(i)\,-\,\hat{\mathbf{h}}_{j}(i)\Big)^{2}}{0.5\Bigg(\sum\limits_{i}^{M*L}\hat{\mathbf{h}}_{k}(i)^{2}\,+\,\sum\limits_{i}^{M*L}\hat{\mathbf{h}}_{j}(i)^{2}\Bigg)}\ . (24) Therein, \hat{\mathbf{h}}_{k} and \hat{\mathbf{h}}_{j} are the vectorized MUAPs, i.e., obtained by stacking all (spatial and temporal) MUAP components in a 1D vector, of MU k and MU j , respectively. Further, we define the relative MUAP amplitude as the root-mean-square (RMS) of the spatio-temporal MUAPs, divided by the RMS of the total EMG signal. 3.4 Decomposition After extending the simulating signals (with R=16 as the default value), we used ZCA whitening to decorrelate the extended data. To limit the effect of noise, we added a regularization factor to the eigenvalues that is equal to the mean of the lowest half of the eigenvalues. In Section 2.2.3 , we have shown that for robust learning, the projection vector converges to a scaled version of the extended and whitened MUAP. Thus, to avoid any bias towards a specific decomposition algorithm, we directly reconstructed the (delayed) spike trains of MU k given the known mixing matrix: \begin{split}\mathbf{\widehat{\tilde{s}}}_{k}(t,l)\ =\ \frac{\mathbf{\tilde{h}}_{kl}^{T}}{|\mathbf{\tilde{h}}_{kl}|}\,\mathbf{\tilde{z}}(t)\ ,\ \text{with}\ \ 01 , i.e., yielding a convex function. Making use of Jensen’s inequality, we obtain the following condition: \mathbb{E}\Big[\sum_{t\in\mathcal{S}_{k}}G\Big(\mathbf{w}_{k}^{T}\mathbf{\tilde{z}}(t)\Big)\Big]\ \geq\ N_{\mathcal{S}_{k}}\cdot G\left(S_{\mathrm{cos}}^{k,kl}||\mathbf{\tilde{h}}_{kl}||\right)>\ G\,\Big(\underset{t\in\mathcal{S}_{k}}{\operatorname{arg\,max}}\ ||\mathbf{\tilde{z}}(t)||\Big)\ . (A.3) Hence, a true source is only identifiable if there exists a \mathbf{w}_{k} such that ( A.3 ) holds. It can be seen that the identifiability depends on the number of spikes, the selected objective function and the ratio between the amplitudes of the outlier and S_{\mathrm{cos}}^{k,kl}||\mathbf{\tilde{h}}_{kl}|| . Appendix B Supplementary simulations B.1 Motor neuron parameters The motor neuron model parameters were based on experimental animal models ( Caillet et al. 2022 ) . We used the following parameters: \begin{split}R_{j}\ &=\ 1.68\cdot 10^{-10}\cdot S_{j}^{-2.43},\\ \tau_{j}\ &=\ 7.9\cdot 10^{-5}\cdot D_{j}\cdot R_{j},\\ t_{j}^{\mathrm{ref}}\ &=\ 0.2\cdot 2.7\cdot 10^{-8}\cdot D_{j}^{-1.51},\\ S_{j}\ &=\ 3.96\cdot 10^{-4}\cdot I_{j}^{0.396},\\ I_{j}\ &=\ 3.85\cdot 10^{-9}\cdot 9.1^{(j/N)^{1.1831}},\end{split} (B.1) where R_{j} , \tau_{j} , t_{j}^{\mathrm{ref}} , S_{j} , and I_{j} denote the membrane resistance (unit: \text{\,}\mathrm{\SIUnitSymbolOhm} ), membrane time constant (seconds), refractory time (seconds), neuron surface area (unit. \text{\,}\mathrm{m}^{2} ), and rheobase (ampere) for motor neuron j ( j=1,\ldots,N ), with N=300 motor neurons. Moreover, D_{j} denote the soma diameter for motor neuron j , which was set in a linear fashion from 50100\text{\,}\mathrm{\SIUnitSymbolMicro m} . We set the time step to \Delta t= 0.1\text{\,}\mathrm{ms} (i.e., 10\text{\,}\mathrm{k}\mathrm{H}\mathrm{z} sampling rate), the resting potential to V_{\mathrm{r}}= -70\text{\,}\mathrm{mV} , the threshold potential to V_{th}= -50\text{\,}\mathrm{mV} , duration T= 60\text{\,}\mathrm{s} , and finally, the leakage and excitability parameters g_{j}^{\mathrm{L}}=g_{j}^{\mathrm{E}} linearly decreasing from 0.25 to 0.15 (smallest to largest). Appendix C Supplementary results C.1 Doublets We investigated the motor neuron identifiability in the presence of doublets, i.e., two consecutive discharges that are about 210\text{\,}\mathrm{m}\mathrm{s} apart ( Christie and Kamen 2006 ) , which is important for rapid force generation. We generated surface EMG signals given an active pool of 78 MUs (trapezoid-shaped drive, maximal amplitude of 7\text{\,}\mathrm{n}\mathrm{A} , common noise with a CoV of 20\text{\,}\% , independent noise with a CoV of 5\text{\,}\% and an SNR of 20\text{\,}\mathrm{d}\mathrm{B} ). Then, we added an extra spike 3 ms after the first spike (corresponding to an instantaneous firing rate of 333\text{\,}\mathrm{H}\mathrm{z} ). We applied the MUAP-based projection vector to a noise-less EMG signal with only MU #50 active and the full EMG signal with additive noise (Supplementary Figure 1 ). Although the spike reconstruction is imperfect, the resolution is good enough to separate the two spikes. C.2 Spike train dependencies Given the finding that the motor neuron identifiability depends on spike train correlations (see Section 4.3 ), it turned out that the norm of the whitened MUAPs changed with respect to the common and independent CoV noise. In detail, the norm was the lowest for both MUs when the spike trains were the most correlated (Supplementary Figure 2 ). However, there was a clear tendency for the common CoV noise to have a larger effect on the norm changes than the independent CoV noise. We also investigated motor neuron identification when two MUs (#36 and #50) had identical spike trains but one of the spike trains was slightly delayed ( 110\text{\,}\mathrm{m}\mathrm{s} ). We found that for MUs with high amplitude MUAPs, it did not affect their separability (Supplementary Figure 3 ). On the other hand, the MU with a lower MUAP norm was separable with minimal to no false positive and negative rates for about 5\text{\,}\mathrm{m}\mathrm{s} and more. For shorter delays, the false positive and negative rates increased rapidly. Supplementary Figure 1: Investigating the reconstruction accuracy of a motor unit (MU) with doublets (interspike-intervals: 3\text{\,}\mathrm{m}\mathrm{s} ). The MU filter is applied to a noise-less EMG signal with only MU #50 active ( A and B ) as well as the full EMG signal with additive coloured noise ( C and D ). Supplementary Figure 2: Investigating the changes in the norm of whitened motor unit action potentials (MUAPs) given a varying degree of spike train correlations. This is achieved by changing the coefficient of variation (CoV) of the common and independent noise of the motor neuron pool input current. The figure shows two exemplarily selected MUs (Top row: MU #1; bottom row: MU #24). Supplementary Figure 3: Investigating the separability when two motor units (MUs) had identical spike trains but where one of the spike trains was slightly shifted (1 to 10 ms), inducing dependence between the two MUs.