On the origin of mid-infrared colors in γ \gamma -ray blazars Raniere de Menezes 1,2, Raffaele D’Abrusco 3, Francesco Massaro 1,2,4,5 Abstract Context. The combination between non-thermal and thermal emission in γ \gamma -ray blazars pushes them to a specific region of the mid-infrared three-dimensional color diagram, the so-called blazar locus , built based on observations performed with the Wide-field Infrared Survey Explorer. The selection of blazar candidates based on these mid-infrared colors has been extensively used in the past decade in the hunt for the counterparts of unassociated γ \gamma -ray sources observed with the Fermi Large Area Telescope and in the search for new blazars in optical spectroscopic campaigns. Aims. In this work, we provide a theoretical description of the origin of the blazar locus and show how we can reasonably reproduce it with a model consisting of only three spectral components: a log-parabola accounting for the non-thermal emission, and an elliptical host and dust torus accounting for the thermal emission. Methods. We simulate spectral energy distributions (SEDs) for blazars, starting with a pure log-parabola model and then increasing its complexity by adding a template elliptical galaxy and dust torus. From these simulations, we compute the mid-infrared magnitudes and corresponding colors to create our own version of the blazar locus . Results. Our modeling allows for the selection of spectral parameters that better characterize the mid-infrared emission of γ \gamma -ray blazars, such as the log-parabola curvature ( β < 0.04 \beta<0.04 for 50% of our sample) and an average spectral peak around E p ≈ 1.5 × 10 − 13 E_{p}\approx 1.5\times 10^{-13} erg. We also find that the log-parabola is the main spectral component behind the observed mid-infrared blazar colors, although additional components such as a host galaxy and a dust torus are crucial to obtain a precise reconstruction of the blazar locus . 1 Introduction Blazars are one of the most elusive types of active galactic nuclei (AGNs) and their multiwavelength emission, mainly non-thermal, arises from the acceleration of charged particles in a relativistic jet closely aligned with the line of sight ( Blandford & Königl 1979 ) . They are divided into two main classes based on their optical spectra ( Massaro et al. 2009 ) , i.e., the BL Lacs, which present only weak emission or absorption lines (equivalent widths <5 Å), or even a continuum-dominated spectrum completely depleted of lines ( Stickel et al. 1991 ; Landoni et al. 2014 ) ; and the flat spectrum radio quasars (FSRQs), which have broad emission lines, a dominant blue continuum, and a flat radio spectrum ( Chen et al. 2009 ; Ghisellini et al. 2011 , spectral index \alpha<0.5 in the 1\sim 5 GHz range;) . Although relatively rare among AGNs, blazars are the dominant population in the \gamma -ray sky, accounting for more than 50% of all sources observed so far with the Fermi Large Area Telescope ( Abdollahi et al. 2022 , LAT;) . The non-thermal emission of blazars produces a characteristic spectral energy distribution (SED) that exhibits two broad bumps: one at low energies, originating from the synchrotron emission of relativistic particles accelerated in the blazar jet and peaking somewhere between the radio and soft X-rays; and a second one peaking at \gamma -rays typically associated with the inverse Compton scattering of local synchrotron or external thermal photons by the relativistic leptons in the blazar jet ( Fossati et al. 1998 ; Ghisellini et al. 1998 ; Abdo et al. 2010 ) , although a hadronic interpretation is also possible ( Böttcher et al. 2013 ; de Menezes et al. 2020c ) . This particular SED shape, dominated by non-thermal emission, positions \gamma -ray blazars in a distinct region of the mid-infrared three-dimensional color space defined by the Wide-field Infrared Survey Explorer ( Wright et al. 2010 , WISE;) filters, the so-called blazar locus ( Massaro et al. 2011 ; Massaro et al. 2012b ; D’Abrusco et al. 2014 ) . These mid-infrared properties of blazars have then been used as a diagnostic tool for the characterization of AGNs ( Stern et al. 2012 ; Assef et al. 2013 ; Yan et al. 2013 ; Mateos et al. 2013 ) and the identification/association of uncertain and unknown low-energy counterparts of Fermi -LAT \gamma -ray sources ( Massaro et al. 2012b ; Massaro et al. 2015b ; Massaro & D’Abrusco 2016 ; Abdollahi et al. 2020 ; de Menezes et al. 2020b ) , many of which were later confirmed to be blazars via optical spectroscopy ( Paggi et al. 2013 ; Ricci et al. 2015 ; Crespo et al. 2016 ; Marchesini et al. 2019 ; de Menezes et al. 2020a ; Peña-Herazo et al. 2020 ; Peña-Herazo et al. 2021 ; García-Pérez et al. 2023 , e.g.,) . In this context, the WISE Blazar-Like Radio-Loud Sources catalog ( D’Abrusco et al. 2014 ; D’Abrusco et al. 2019 ; de Menezes et al. 2019 , WIBRaLS;) emerges as one of the most successful catalogs of \gamma -ray blazar candidates, which was designed by selecting radio-loud sources detected in all four WISE bands (nominally at 3.4, 4.6, 12, and 22 \mu m) and presenting mid-infrared colors similar to those of Fermi -LAT blazars (i.e. within the blazar locus ). In this work, we model the SED of sources located within the blazar locus , showing why the blazars occupy a specific region of the three-dimensional mid-infrared color space, well separated from other astrophysical sources dominated by thermal radiation, and identifying the ranges of non-thermal parameters that characterize these blazars. We furthermore discuss why this locus cannot be reasonably reproduced by sources with pure power-law spectra in the mid-infrared. Throughout this work, the WISE bands are indicated as W1, W1, W3, and W4, corresponding respectively to the nominal wavelengths centered at 3.4, 4.6, 12, and 22 \mu m. The present paper is organized as follows. In § 2 we detail how the blazar locus was built based on a clean selection of blazars. In § 3 we describe how we model the locus based on a combination of non-thermal emission from the jet, thermal emission from the host galaxy, and thermal emission from a dust torus. We show the results of our modeling in § 4 and present a discussion and conclusions in § 5 . In this work we assume a flat Universe with h=0.70 , \Omega_{m}=0.30 , and \Omega_{\Lambda}=0.70 , where the Hubble constant is H_{0}=100\penalty\ h km s -1 Mpc -1 ( Tegmark et al. 2004 ) . The WISE magnitudes adopted here are in the Vega system and are not corrected for the Galactic extinction since such a correction only affects the W1 band for sources lying close to the Galactic plane, and it ranges between 2% and 5% of a magnitude ( D’Abrusco et al. 2014 ) , thus not significantly affecting the results. 2 The blazar locus In the two-dimensional W1-W2\times W2-W3 color-color diagram for WISE sources, the blazars, which are dominated by non-thermal emission, occupy a very specific region (the so-called blazar strip ), well separated from other sources that are dominated by thermal radiation, as shown by Massaro et al. 2011 ; Massaro et al. 2012a ; Massaro et al. 2012b . In following works ( D’Abrusco et al. 2012 ; D’Abrusco et al. 2014 ) , a refined model of this region was built including a third axis (i.e. W3-W4 ) in the mid-infrared WISE color diagram, the so-called blazar locus . The blazar locus adopted here is based on the original sample of blazars described in D’Abrusco et al. 2019 . This sample consists of the blazars listed in the Fermi -LAT third source catalog ( Acero et al. 2015 , 3FGL;) that have a counterpart in the Roma-BZCat catalog ( Massaro et al. 2015a ) and are detected in all four WISE filters. The counterpart in Roma-BZCat guarantees that the blazar nature of the source was carefully verified by inspection of its multi-wavelength emission, while the counterpart in 3FGL guarantees that these blazars are \gamma -ray emitters. We also verified that using the updated version of the Fermi-LAT catalog (i.e. 4FGL) increases the number of locus sources by less than 5% and does not appreciably change the values of the best-fit parameters of the locus model adopted here and published by D’Abrusco et al. 2019 . The final sample used to define the WISE blazar locus consists of 901 \gamma -ray-emitting blazars, split into 497 BL Lacs and 404 FSRQs. The intrinsic distribution of blazar redshifts varies between the two spectral classes, and the observational incompleteness of our sample affects these classes differently, leading to a reshaping of the locus driven by the redder colors of high-redshift sources. In Figure 1 we show how different regions of the blazar locus (defined by the 90% containment black contours) present different average redshifts, with the top-right corner of both panels being dominated by higher-redshift sources ( Massaro et al. 2015a , all redshifts were collected from) . A realistic model for the locus has to consider this fundamental feature (see § 3.2 ). Each green tile in this figure represents the average redshift computed for the N blazars lying within the tile edges. Since we only have the redshifts for 559 blazars (out of 901), the average redshift per tile is computed only for those blazars with an available redshift (dark-blue numbers), while those sources with unknown redshifts (brown numbers) are not taken into account. For those cells containing more than 10 blazars with an available redshift, we also computed the redshift standard deviation, finding values in the range of 25\% (top-right corner of the locus ) to \sim 50\% (bottom-left corner) of z_{av} . Figure 1: The distribution of average redshift (green tiles) for the blazars used to create the locus . We see that the regions dominated by FSRQs (i.e. top-right corners of both panels) have higher average redshifts ( z_{av} ). The dark-blue numbers within each tile represent the total number of sources used to compute the average redshift, while the brown numbers represent the number of blazars with unknown redshift. Tiles with no redshift available are set to 0 and tagged with the label “No z”, while the background tiles are set to -0.5. The black contours represent the 90% containment projections of the blazar locus in both mid-infrared color-color planes. 3 Locus modeling To model the lower-energy bump in the SED of blazars, we start with a semi-analytical model where a log-parabolic shape is used to describe the peak of the synchrotron emission (see e.g. Landau et al. 1986 ; Massaro et al. 2004a , for a qualitative and quantitative discussion on this topic) . A log-parabolic spectrum is naturally obtained if the statistical acceleration of particles in the blazar jet has an energy-dependent probability that goes with 1/E^{b} (where E is the particle’s energy and b is a positive constant), such that faster particles tend to escape from the acceleration site without being further accelerated ( Massaro et al. 2004a ; Massaro et al. 2004b ; Massaro et al. 2006 ) . The log-parabolic curve is typically written as: F(E)=K(E/E_{1})^{-\alpha-\beta\log(E/E_{1})}\penalty\ \penalty\ \penalty\ [\rm{cm}^{-2}\penalty\ \rm{s}^{-1}\penalty\ \rm{erg}^{-1}], (1) where \alpha is the spectral index, \beta is the curvature parameter, such that larger \beta values imply on a stronger curvature, and E_{1} is the pivot energy, which is typically set as a constant to avoid degeneration with the normalization constant K . In this work, however, we prefer to use the log-parabolic spectrum in the form ( Massaro et al. 2004b ; Tanihata et al. 2004 ; Tramacere et al. 2007 ) : S(E)=S_{p}10^{-\beta\log^{2}(E/E_{p})}\penalty\ \penalty\ \penalty\ [\rm{erg}\penalty\ \rm{cm}^{-2}\penalty\ \rm{s}^{-1}], (2) which conveniently gives us the SED peak value S_{p}=E_{p}^{2}\,F(E_{p}) , the energy at which the SED peak is located E_{p} , and the spectral curvature \beta . In the following subsections, we will first describe the simplified SED model consisting only of a log-parabola component and then switch to a more complex description of the SEDs by including an elliptical host galaxy and a dust torus. In the simplistic log-parabola assumption, the problem is reduced to basically finding the best-fit values of the parameters S_{p} , E_{p} and \beta . 3.1 Non-thermal emission Figure 2: The mid-infrared color-color diagrams for the log-parabola model. We see that this simplified model already seems to suggest that the blazar locus (represented by the three-dimensional color space delimited by the 90%-containment black contours from both panels) is populated by blazars with weak spectral curvature (i.e. relatively small values of \beta ), although pure power-law spectra (magenta lines), i.e. zero spectral curvature, also seem to be insufficient to create the observed distribution of sources in the locus . The red contours represent the 90% containment region for the simulated sources lying within the 90% containment contours of the blazar locus . The red and black isodensity contours are significantly different from each other, as detailed in the text. Here we plot only 5 000 points for readability reasons. We use Eq. 2 to simulate SEDs with parameters randomly chosen in the log-space ranges 10^{-14}0.9 and W3-W4>2.2 , and the second one containing the remaining sources consisting mainly of BL Lacs. Selecting different color cuts in the ranges 0.8100 GeV (finanziamento MIUR Dipartimenti di Eccellenza 2018-2022 – per il Dipartimento di Fisica), DFI.2021.24 . R.D’A. is supported by NASA contract NAS8-03060 (Chandra X-ray Center). In this work we extensively used TOPCAT ( Taylor 2005 ) and astropy ( Astropy Collaboration et al. 2013 ; Astropy Collaboration et al. 2018 ) for preparation and manipulation of the data. This publication makes use of data products from the Wide-field Infrared Survey Explorer, which is a joint project of the University of California, Los Angeles, and the Jet Propulsion Laboratory/California Institute of Technology, funded by the National Aeronautics and Space Administration.