Effects of hair on the image of a rotating black hole illuminated by a thin accretion disk Yuan Meng, Xi-Jing Wang, Yong-Zhuang Li, Xiao-Mei Kuang Abstract In this paper, we investigate the shadow and optical appearance of the hairy Kerr black hole illuminated by a thin accretion disk, the materials of which outside the innermost stable circular orbit (ISCO) move on the equatorial circular orbit, while inside the ISCO they quickly plunge into the black hole. The deformation parameter α \alpha and hair parameter l o l_{o} are found to influence the motions of accretion as well as the redshift effect of the photon, such that they significantly affect the shadow and image of the hairy Kerr black hole. Especially, these two parameters have competing effects on the size of the black hole’s shadow, and significantly increase the width of photon ring. This study provides a preliminary theoretical prediction that the image of the hairy Kerr black hole, especially the photon ring structure, may be used to constrain the hair parameters with future high-precision astronomical observation. I Introduction Recently, the Event Horizon Telescope (EHT) has achieved remarkable breakthroughs, offering new insights into the physical properties of strong gravitational fields. The EHT successfully captured images of two supermassive black holes: M87* [ 1 , 2 , 3 , 4 , 5 , 6 ] and Sgr A* [ 7 , 8 , 9 , 10 , 11 , 12 ] . These images represent a significant advancement in astronomical observation, providing an unprecedented opportunity to test general relativity (GR) under extreme physical conditions. The central dark region in these images, known as the black hole shadow, results from strong gravitational lensing that prevents light from escaping the black hole [ 13 , 14 , 15 , 16 , 17 , 18 ] . The outline of the shadow corresponds to the border of the regions that the photons either escape to infinity or are captured by the black hole. Surrounding the shadow, the bright ring-like structure, referred to as the photon ring, is formed by light rays emitted from matters within the accretion flow. This material, mainly composed of gas and dust, orbits the black hole at high velocities, generating enormous amounts of energy as it spirals inward under the influence of the black hole’s strong gravity. The light emitted by the accretion flow is bent by the strong gravitational field, creating the luminous ring observed in the images. This phenomena provides invaluable experimental evidence for investigating black hole accretion processes, matter dynamics, magnetic fields, and so on. Moreover, it also provides critical insights into the fundamental physical laws governing the most extreme environments in the universe. The study of black hole shadows originated from investigations into the photon escape cone [ 16 ] , which corresponds to the critical impact parameter of the photon sphere. Early works also explored the angular radius of the photon capture region for a Schwarzschild black hole [ 19 ] , while Bardeen examined the distinctive D-shaped shadow of a Kerr black hole [ 17 ] , arising from the Lense-Thirring effect induced by the black hole’s rotation. These foundational studies spurred significant interest in black hole shadow research, leading to extensive numerical simulations of shadows across a variety of black holes [ 20 , 21 , 22 , 23 , 24 ] . These investigations revealed that black hole shadows are highly sensitive to the spacetime geometry in which they are embedded. In addition, black hole shadows have been extensively studied in the context of alternative gravitational theories and higher-dimensional spacetimes, and even a naked singularity can produce a shadow resembling that of a black hole [ 25 , 26 , 27 ] . On the other hand, the black hole images obtained by the EHT are widely interpreted as representations of Kerr black holes in GR. However, the finite resolution of the EHT allows for the possibility of alternative explanations, opening a window to explore modified theories of gravity. This has led to considerable interest in using EHT observations to test these theories and constrain their parameters, see for examples [ 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 , 41 ] and references therein. The image of a black hole is significantly influenced by the accretion material surrounding it, particularly the luminous accretion flow. This matter not only determines the optical characteristics of the black hole but also affects its appearance through complex physical processes. As we described previously, a black hole image is not merely a depiction of spacetime geometry but also a result of the intricate interplay between the surrounding matter and the black hole’s extreme gravitational forces. To accurately replicate such images, general relativistic magnetohydrodynamics (GRMHD) simulations are often employed. These simulations model the behavior of electromagnetic plasma in the vicinity of the black hole while accounting for the effects of its strong gravitational field [ 42 ] . However, simplified accretion models are often sufficient for capturing the primary features of a black hole image. For instance, early studies using the thin accretion disk model [ 19 , 43 ] demonstrated the appearance of primary and secondary images outside the black hole shadow. These images can distinguish between a Schwarzschild black hole and a static wormhole. Wald et al. further analyzed thin accretion disks around Schwarzschild black holes, identifying three types of emissions: direct emission, lensed ring emission, and photon ring emission [ 44 ] . While these emissions cumulatively contribute to the observed intensity, the photon ring emission, due to its narrow width, has a negligible impact on the total intensity. Static accretion disks around various black holes have been extensively studied [ 45 , 46 , 47 , 48 , 49 , 50 , 51 , 52 , 53 , 54 , 55 , 56 , 57 , 58 , 59 ] and references therein. Of particular interest are black holes with two photon spheres, as discussed in [ 60 , 61 , 62 ] . The presence of an additional photon sphere significantly enhances the contribution of photon ring emission to the total observed intensity. Similarly, spherical and infalling spherical accretions have garnered attention, highlighting that the shape and size of the black hole shadow are primarily dictated by the spacetime geometry rather than the specific details of the accretion flow [ 63 , 64 , 65 , 66 , 67 ] . Considering more realistic astrophysical scenarios, rotating black holes and their associated accretion images have been a focal point of recent research [ 68 , 69 , 70 , 71 , 72 , 73 , 74 , 75 , 76 , 77 , 78 , 79 , 80 ] . The no-hair theorem states that a general-relativistic black hole is fully and uniquely characterized by its mass, angular momentum, and charge [ 81 ] . However, in the presence of additional fields or sources surrounding the black hole, the black hole may acquire additional global charges called “hairs”, which causes its spacetime structure to deviate from the GR description. Recently, the hairy black hole was first constructed based on the “gravitational decoupling (GD) approach” in [ 82 , 83 ] . This approach aims to generate black holes with hair by introducing additional sources to describe the deformation of known solutions of GR. Hairy black holes carry additional global charges and could provide more information to test the no-hair theorem. It is worth noting that the hairy black holes obtained by the GD approach exhibit a high degree of generality, because the GD approach does not rely on specific matter fields and allows the use of different types of hair (such as scalar hair, tensor hair, fluidlike dark matter, and so on). Subsequently, the hairy black holes obtained through the GD approach have attracted widespread attention, such as the thermodynamics of rotating hairy black holes [ 84 ] , scalar perturbations and quasinormal modes of hairy black holes [ 85 , 86 , 87 ] , strong gravitational lensing, black hole shadow and image [ 29 , 88 ] , precession and Lense-Thirring effect [ 89 ] and gravitational waves from extreme mass ratio inspirals [ 90 ] . Especially, in [ 62 , 91 ] , it was found that even though the parameters have significant influences on the rings and shadows of hairy Schwarzschild black hole, its images with certain parameters could be indistinguishable to that of Schwarzschild black hole, namely, the degeneracies of images raise between the hairy Schwarzschild black hole and Schwarzschild black hole. Moreover, the hairy Schwarzschild black hole can have double photon spheres, which introduce new additional rings and accretion features, in contrary to single photon sphere in Schwarzschild black hole in GR. These findings implies that the black hole hair introduced by GD method indeed code significant information on optical features of the hairy static black holes. As an extension of our previous work, this paper aims to investigate the optical appearances of the accretion disk of hairy Kerr black hole. We should elaborately explore the effects of hairy parameters on the black hole shadows and images of hairy Kerr black hole, and check if the image degeneracies between the hairy Kerr black hole and Kerr black hole can still exist. The answer is not straightforward because different from that around static black hole, the accretion disk surrounding the rotating black hole should move due to the drag force, such that the redshift effects of the photons emitted from disk to the distant observer should be carefully treated. The paper is organized as follows. In Sec. II , we briefly review the hairy Kerr black hole constructed from GD method, and then analyze the motions of the surrounding accretion disk model. In Sec. III , we first review the imaging process by the backward ray tracing method. Then we compare the shadows and images of the hairy Kerr black hole against those of Kerr black hole, and analyze the effects of the hairy parameters. The last section contributes to our conclusion and discussion. All through this paper, we will use the natural unit with G=c=1 . II Hairy Kerr black hole and its surrounding accretion disk In this section, we review the basic ingredients for the construction of accretion disk images around the hairy Kerr black hole. We begin by specifying the spacetime metric and subsequently outline some well established analytical results related to accretion disk in this background. II.1 Hairy Kerr black hole As mentioned above, the interactions between black hole spacetimes and matter fields can introduce additional charges, leading to the formation of “hairs”. These hairs represent new physical effects that modify the black hole’s spacetime geometry, resulting in so-called hairy black holes. Recently, Ovalle et.al employed the GD approach to derive a spherically symmetric metric with hair [ 82 ] . In their work, the Einstein equations take the form G_{\mu\nu}\equiv R_{\mu\nu}-\frac{1}{2}Rg_{\mu\nu}=8\pi\tilde{T}_{\mu\nu}, (1) where the total energy-momentum tensor \tilde{T}_{\mu\nu} comprises two components: \tilde{T}_{\mu\nu}=T_{\mu\nu}+\vartheta_{\mu\nu} . Here T_{\mu\nu} represents the energy-momentum tensor of a known GR solution, while \vartheta_{\mu\nu} accounts for new matter fields or a new gravitational sector. The conservation law \nabla^{\mu}\tilde{T}_{\mu\nu}=0 is satisfied due to the Bianchi identity. The GD approach, originally proposed in [ 92 ] and extensively utilized in the subsequent work [ 83 , 82 ] , leverages the decoupling of \vartheta_{\mu\nu} from T_{\mu\nu} . This framework enables the systematic construction of deformed solutions by separating the equations of motion for the two sectors. To illustrate how the GD approach operates, we consider a spherically symmetric and static solution {g}_{\mu\nu} to the field equations as ds^{2}=-e^{\nu(r)}dt^{2}+e^{\lambda(r)}dr^{2}+r^{2}(d\theta^{2}+\sin^{2}\theta d\phi^{2}), (2) which generates the Einstein tensor G_{\mu}^{~\nu}(\nu(r),\lambda(r)) . In this context, the solution can be derived from a seed metric governed solely by the source T_{\mu\nu} (i.e. \vartheta_{\mu\nu}=0 ), ds^{2}=-e^{\xi(r)}dt^{2}+e^{\mu(r)}dr^{2}+r^{2}(d\theta^{2}+\sin^{2}\theta d\phi^{2}). (3) The introduction of \vartheta_{\mu\nu} corresponds to a deformation of the seed metric, expressed as \displaystyle\xi(r)\rightarrow\nu(r)=\xi(r)+\alpha~k(r),~~~~~~~e^{-\mu(r)}\rightarrow e^{-\lambda(r)}=e^{-\mu(r)}+\alpha~h(r), (4) where the parameter \alpha quantifies the deformation strength. With these deformations, the Einstein equation ( 1 ) is separated into {G}_{\mu}^{~\nu}(\xi(r),\mu(r))=8\pi T_{\mu}^{~\nu},~~~\alpha~\mathscr{G}_{\mu}^{~\nu}(\xi(r),\mu(r);k(r),h(r))=8\pi\vartheta_{\mu}^{~\nu}. (5) When \alpha=0 , the tensor \vartheta_{\mu\nu} vanishes, reverting the solution to the original seed metric. The linear decomposition of the Einstein tensor aligns with the linear superposition of sources on the right-hand side of ( 1 ), enabling the GD method to function effectively. To demonstrate the application of this approach, consider the seed metric ( 3 ) as the Schwarzschild solution, representing a vacuum case with T_{\mu\nu}=0 . By introducing an anisotropic fluid source satisfying the strong energy condition, the deformed Einstein equations yield a hairy Schwarzschild black hole solution ds^{2}=-f(r)dt^{2}+\frac{dr^{2}}{f(r)}+r^{2}(d\theta^{2}+\sin^{2}\theta d\phi^{2})~~\mathrm{with}~~f(r)=1-\frac{2M}{r}+\alpha e^{-r/(M-l_{o}/2)}. (6) This metric describes a deformation of the Schwarzschild solution due to the presence of additional material sources, such as scalar hair, tensor hair, or fluidlike dark matter. When \alpha=0 , the metric reduces to the standard Schwarzchild solution in GR, corresponding to the absence of the matters. Furthermore, in this scenario, hairy Kerr black hole was also derived, which is written in Boyer-Lindquist coordinates as \displaystyle ds^{2} \displaystyle=g_{tt}dt^{2}+g_{rr}dr^{2}+g_{\theta\theta}d\theta^{2}+g_{\phi\phi}d\phi^{2}+2g_{t\phi}dtd\phi (7) \displaystyle=-\left(\frac{\Delta-a^{2}\sin^{2}\theta}{\Sigma}\right)dt^{2}+\sin^{2}\theta\left(\Sigma+a^{2}\sin^{2}\theta\left(2-\frac{\Delta-a^{2}\sin^{2}\theta}{\Sigma}\right)\right)d\phi^{2} \displaystyle+\frac{\Sigma}{\Delta}dr^{2}+\Sigma d\theta^{2}-2a\sin^{2}\theta\left(1-\frac{\Delta-a^{2}\sin^{2}\theta}{\Sigma}\right)dtd\phi, with \displaystyle\Sigma=r^{2}+a^{2}\cos^{2}\theta,~~~~~~\Delta=r^{2}+a^{2}-2Mr+\alpha r^{2}e^{-r/\left(M-\frac{l_{o}}{2}\right)}, (8) describing a deformation of the Kerr black hole. Here, M is the black hole mass, \alpha is the deformation parameter and l_{o}=\alpha l with l being a length-scale parameter associated with the primary hair charge. The condition l_{o}\leq 2M ensures asymptotic flatness. Further details of these calculations can be found in [ 82 , 83 ] . For clarity, we have omitted the intermediate steps and directly presented the final hairy Schwarzschild and Kerr black hole metric. Moreover, in the following study, we will rescale all the physical quantities by the mass M and set M=1 for evaluation. By solving \Delta=0 , we can obtain the event horizon of the black hole. However, the expression of the event horizon is rather complicated and cannot be solved analytically. Instead, the influence of parameters \alpha and l_{o} on the event horizon is shown in FIG. 1 . Obviously, the parameter \alpha suppresses the black hole event horizon r_{h} , and as the parameter l_{o} increases, the event horizon of the hairy Kerr black hole becomes larger. Figure 1: The event horizon r_{h} of the hairy Kerr black hole as functions of the parameters \alpha and l_{o} , respectively. II.2 Surrounding thin accretion disk We shall show a simple thin, Keplerian accretion disk consisting of free electrically neutral plasma, of which the motion is solely controlled by gravitational field of the black hole. This means that the motion of the accretion material admits timelike geodesic equations around the hairy Kerr black hole, which can be derived from the Lagrangian of massive particle \displaystyle\mathscr{L}=\frac{1}{2}\left(g_{tt}\dot{t}^{2}+2g_{t\phi}\dot{t}\dot{\phi}+g_{rr}\dot{r}^{2}+g_{\theta\theta}\dot{\theta}^{2}+g_{\phi\phi}\dot{\phi}^{2}\right)\,, (9) where \tau is the proper time of the accreting material and the dot denotes the derivative with respect to \tau . From the Lagrangian, we can derive two constants of the motion \displaystyle\frac{\partial\mathscr{L}}{\partial\dot{t}}=g_{tt}\dot{t}+g_{t\phi}\dot{\phi}=-E\,, (10) \displaystyle\frac{\partial\mathscr{L}}{\partial\dot{\phi}}=g_{t\phi}\dot{t}+g_{\phi\phi}\dot{\phi}=L\,. (11) where E and L are the conserved energy and axial component of the angular momentum for per unit mass. Subsequently, we can obtain the equations of t and \phi as \displaystyle\dot{t} \displaystyle= \displaystyle\frac{g_{\phi\phi}E+g_{t\phi}L}{g_{t\phi}^{2}-g_{tt}g_{\phi\phi}}\,, (12) \displaystyle\dot{\phi} \displaystyle= \displaystyle-\frac{g_{t\phi}E+g_{tt}L}{g_{t\phi}^{2}-g_{tt}g_{\phi\phi}}\,. (13) It is noted that the above equations should be satisfied by arbitrary timelike orbits of massive particles in the spacetime. To describe the motion of the component of an accretion disk, we shall consider that it is infinitesimally thin and perpendicular to the black hole spin axis. In the following studies, we will set \theta=\pi/2 and \dot{\theta}=0 . II.2.1 r\geq r_{\rm ISCO} Since the components of the accretion disk follow timelike geodesics and their motions are determined by the gravitational field of the black hole, the inner edge of the accretion disk can naturally be at the radius of the innermost stable circular orbit (ISCO) [ 17 ] . Outside the ISCO, the motions of the components in the disk can be approximated with equatorial circular orbits which further have \displaystyle\dot{r}=\ddot{r}=0. (14) Then the geodesic equations of the massive particles are written as \displaystyle\left(\partial_{r}g_{tt}\right)\dot{t}^{2}+2\left(\partial_{r}g_{t\phi}\right)\dot{t}\dot{\phi}+\left(\partial_{r}g_{\phi\phi}\right)\dot{\phi}^{2}=0\,. (15) The angular velocity of the disk component measured in the Boyer-Linguist coordinate is \displaystyle\Omega_{\rm K}=\frac{d\phi}{dt}=\frac{-\partial_{r}g_{t\phi}\pm\sqrt{\left(\partial_{r}g_{t\phi}\right)^{2}-\left(\partial_{r}g_{tt}\right)\left(\partial_{r}g_{\phi\phi}\right)}}{\partial_{r}g_{\phi\phi}}\,, (16) where the sign “+” is for co-rotating orbits and the sign “-” is for counter-rotating orbits. We proceed to find the ISCO radius by studying the stability of the geodesic circular orbits. Combining g_{\mu\nu}\dot{x}^{\mu}\dot{x}^{\nu}=-1 for timelike particle, ( 12 ), ( 13 ) and \theta=\pi/2 , we can obtain the radial motion equation \displaystyle g_{rr}\dot{r}^{2}-V_{\rm eff}(r)=0\,, (17) with \displaystyle V_{\rm eff}(r)=\frac{g_{\phi\phi}E^{2}+2g_{t\phi}EL_{z}+g_{tt}L^{2}}{g_{t\phi}^{2}-g_{tt}g_{\phi\phi}}-1\,. (18) Then the conditions ( 14 ) for the circular orbits are converted to V_{\rm eff}=V_{\rm eff}^{\prime}=0 where the prime denotes the derivative with respect to r , but the (in)stability of the circular orbit is determined by the sign of V_{\rm eff}^{\prime\prime} , i.e, V_{\rm eff}^{\prime\prime}>0 corresponds to stability while V_{\rm eff}^{\prime\prime}<0 gives unstable circular orbit. Then the ISCO radius separating stable orbits ( r>r_{\rm ISCO} ) and unstable orbits ( rr_{\rm ISCO}$}\\ -\frac{p_{(0)}/k_{t}}{\dot{r}k_{r}/\varepsilon+E_{\rm ISCO}(g^{tt}-g^{t\phi}b)+L_{\rm ISCO}(g^{\phi\phi}b-g^{t\phi})}\Big|_{r=r_{n}}\quad\text{for $r_{h}