Roughening dynamics of interfaces in the two-dimensional quantum Ising model Wladislaw Krinitsin, Niklas Tausendpfund, Matteo Rizzi, Markus Heyl, Markus Schmitt Abstract The properties of interfaces are key to understand the physics of matter. However, the study of quantum interface dynamics has remained an outstanding challenge. Here, we use large-scale Tree Tensor Network simulations to identify the dynamical signature of an interface roughening transition within the ferromagnetic phase of the 2D quantum Ising model. For initial domain wall profiles we find extended prethermal plateaus for smooth interfaces, whereas above the roughening transition the domain wall decays quickly. Our results can be readily explored experimentally in Rydberg atomic systems. Introduction. The static and dynamical properties of interfaces are fundamental to understand the physics and to engineer the functionality of materials. Interfaces can even undergo their own unique phase transitions independent of the bulk matter. At a roughening transition, first identified in models for surface growth and classical magnetism Burton et al. 1951 ; Dobrushin 1973 ; Weeks et al. 1973 , the nature of interfaces changes qualitatively from being smooth to rough. Intuitively these different phases can be characterized by their interface fluctuations, with small and bounded fluctuations in the smooth phase and large, and unbound ones in the rough phase. The theoretical analysis of effective surface-on-surface (SOS) models revealed the Berezinski-Kosterlitz-Thouless (BKT) nature of the transition Chui and Weeks 1976 ; van Beijeren 1977 , which was confirmed in numerical simulations Hasenbusch et al. 1996 . For experimental studies, the interface between liquid and crystallized Helium-4 is a particularly suited model system Balibar et al. 2005 . At the involved low temperatures, however, quantum effects enter. It was found that quantum fluctuations can cause a roughening transition at vanishing temperature T=0 in two-dimensional systems, but not in three dimensions Fisher and Weeks 1983 ; Fradkin 1983 . Interface properties are relevant also in a broader scientific context beyond condensed matter. For instance, in high-energy physics, the flux tube connecting quarks realizes an interface that can undergo roughening Lüscher 1981 . Signatures of which were recently observed via digital quantum simulation of a lattice gauge theory Cochran et al. 2024 . The exploration of such interface roughening in quantum matter away from equilibrium has, however, remained an outstanding challenge to date. In this work we study the non-equilibrium signatures of the roughening transition in the quantum Ising model. Based on large-scale Tree Tensor Network simulations for real-time evolution Kloss et al. 2020 ; Pavešić et al. 2024 ; Krinitsin et al. 2025a , we find that the underlying quantum roughening transition is reflected in a qualitative change of dynamical behavior of domain wall initial conditions upon tuning the transverse field strength. In particular, we identify the independent equilibration of the interface in the smooth interface regime as an alternative cause of prethermal plateaus, which is distinct from the known mechanisms relying on approximate conservation laws or Hilbert space fragmentation Moeckel and Kehrein 2008 ; Moudgalya et al. 2022 . The phenomenology can be readily explored in experiments with Rydberg atomic systems Greiner et al. 2002 ; Georgescu et al. 2014 ; Kinoshita et al. 2006 ; Martinez et al. 2016 ; Choi et al. 2016 ; Gross and Bloch 2017 ; Jurcevic et al. 2017 ; Bernien et al. 2017a ; Zhang et al. 2017 ; Gärttner et al. 2017 ; Choi et al. 2017 ; Levine et al. 2018 ; Hild et al. 2014 ; Barredo et al. 2018 ; Manovitz et al. 2024 . Model. For the central objective to study the dynamics of interfaces we consider the paradigmatic transverse-field Ising model (TFIM) on a square lattice, given by \mathrm{H}=-J\cdot\sum_{\langle i,j\rangle}\sigma^{x}_{i}\sigma^{x}_{j}-g\cdot\sum_{i}\sigma^{z}_{i}\,, (1) where the first sum runs over all neighboring spin pairs. The TFIM exhibits a ferromagnetic phase, that extends to non-zero temperatures, with a quantum phase transition at g_{c}/J\approx 3.04 and a thermal transition temperature of T_{c}/J\approx 2.27 at g=0 Blöte and Deng 2002 . Importantly, the 2D quantum Ising model inherits a second quantum phase transition point of BKT type within the ferromagnetic phase, which is associated with a transition from smooth to rough interfaces Fradkin 1983 . A suited order parameter will be defined at a later point of this work, providing a quantitative description of the transition. In the quantum domain, when considering the limit J\gg g , the TFIM can be perturbatively linked to the PXP model, which shows strong dynamical constrains and Hilbert space fragmentation, leading to a slow relaxation of various domain wall initial conditions Balducci et al. 2022 ; Balducci et al. 2023 ; Krinitsin et al. 2025a ; Pavešić et al. 2024 . For the purpose of studying the dynamics of quantum interfaces, we will initialize the system with two oppositely polarized magnetic domains, separated by a straight domain wall, see Fig. 1 a. This is a natural choice for experimental platforms, while not introducing any additional effects stemming from e.g. interface curvature. For weak enough transverse fields, i.e., within the PXP approximation, these states remain stable due to sectors of different interface lengths being dynamically disconnected from each other, preventing thermalization up to timescales which scale exponentially with J/g 1 1 1 Eventual thermalization is expected to happen for transverse fields g/J\geq 0.2 as is revealed by an analysis of the levelspacing statistics of a 4\times 5 system, see SM for more details Sup . . In the following we depart from any such perturbative limit and target the dynamics in strongly correlated regimes g/J\sim 1 . As will be shown later, we observe pre-thermal plateaus which cannot be explained by Hilbert space fragmentation. Instead, this non-perturbative effect is related to the thermalization of the interface below a roughening temperature. Numerical methods. In order to comprehensively explore the quantum roughening dynamics, we employ a variety of complementary tensor network techniques. The simulations of the full dynamics on the 2D lattice were performed using TTNs and the time dependent variational principle (TDVP) Kloss et al. 2020 ; Pavešić et al. 2024 ; Krinitsin et al. 2025a . Being loop-free, TTNs are efficiently contractable and their hierarchical structure allows for a more natural covering of the 2D lattice than the widely used matrix product states (MPS) Silvi et al. 2019 . MPS will be used later in the text in order to solve time evolution of an effective 1D model. Furthermore, we utilize the variational uniform matrix product state algorithm (VUMPS) Haegeman et al. 2011 ; Haegeman et al. 2016 ; Zauner-Stauber et al. 2018 to study the ground-state properties of the effective model in the thermodynamic limit. Quantum Monte Carlo (QMC) simulations Evertz et al. 1993 ; Evertz 2003 are employed to estimate effective temperatures corresponding to the domain wall initial conditions. More details on the aforementioned methods are given in the supplementary material (SM) Sup . Interface dynamics. A first indication for the slow thermalization dynamics is provided by the time evolution of the magnetization imbalance I=M_{T}-M_{B}\,, (2) with M_{T/B}=\frac{1}{N}\sum_{i\in T/B}\sigma_{i}^{x} and T/B indicating the top and bottom halves of the system (see Fig. 1 a). The imbalance is maximal in the initial state \langle I(t=0)\rangle=1 and it has to vanish in a thermal state. Fig. 1 b shows \braket{I(t)} for a range of transverse fields; the spatially resolved magnetization \braket{\sigma_{i}^{x}(t)} at three time points is included exemplarily in Fig. 1 a. For the largest transverse fields we expect a rapid thermalization, which is reflected by the observed rapid drop in the imbalance on a timescale of tJ\approx 1 . The subsequent slow decay of the remaining imbalance is attributed to the diffusive approach to a finally homogeneous energy density. The smallest field values conversely show extremely long-lived non-thermal states, due to the aforementioned emergent constraints Balducci et al. 2022 ; Balducci et al. 2023 . Noticeably, however, pre-thermal plateaus seem to dominate the dynamics even up to intermediate values of the transverse fields of up to g/J\approx 1 and timescales of Jt\approx 10 . Figure 1: Time evolution of a flat interface on an 8 \times 8 lattice with open boundary conditions. (a) Spatially resolved magnetizations at times tJ=0 , 10 and 100 for a transverse field of g/J=0.75 . The bottom three plots show (b) the imbalance, (c) the domain wall length, and (d) the entropy of entanglement across the initial interface for several transverse fields: the color coding is indicated in the color bar to the right. The imbalance shows the existence of long-lived plateaus, even at transverse fields g\approx J . All the results are shown for three different bond dimensions \chi=181,256,362 , where the opacity increases with the bond dimension. For panel (a) and (b), almost all of the data points lie on top of each other. The fact that the domain wall length operator D=\frac{1}{2}\sum_{\langle i,j\rangle}\left(1-\sigma^{x}_{i}\sigma^{x}_{j}\right) shown in Fig. 1 c strongly departs from its initial value highlights, that the existence of pre-thermal plateaus at intermediate transverse fields cannot be captured within the usual framework of Hilbert space fragmentation governed by restricted domain wall lengths. We will instead demonstrate in the following that an effective description can be formulated in terms of a single-domain-wall approximation. Fig. 1 includes a convergence check of the numerical results with different bond dimensions up to \chi=362 . While late times and stronger transverse fields become challenging, the prominent pre-thermal plateaus are well within the regime of certain convergence. Most sensitive to varying bond dimension is the half-system entanglement entropy (Fig. 1 d), when splitting the system into two equal partitions along the initial interface, which shows that the moderate amounts of entanglement generated up to the lifetime of the plateaus are well captured. Effective model. Figure 2: (a) Mapping from a domain wall state in the full two dimensional model to an effective one-dimensional bosonic state. (b) Expectation value of the kink operator, evaluated on the groundstate of the effective model as a function of the transverse field. Different maximal occupation numbers 4\leq N_{\mathrm{max}}\leq 14 in steps of two are shown; as N_{\mathrm{max}} increases, the kink operator starts exhibiting a jump at g_{R}/J\approx 1.38 corresponding to the roughening transition, see also the SM Sup . (c) Expectation value of the kink operator, evaluated on the thermal state of the effective model in the classical limit ( g=0 ) as a function of temperature. We consider chain lengths L_{x}\in[500,512\cdot 10^{3}] , with exponentially increasing steps. The inset shows that the crossover temperature T_{R} , defined by \langle K(T_{R}/J)\rangle=0.5 , vanishes in the thermodynamic limit as the inverse logarithm of the system size, confirming the analytical prediction ( 5 ) which is indicated by the dashed grey line. The constant b in the x-axis label is given by b=2(1-\cos 1)/\log 2 . Data points in (b) and (c) are represented by crosses, with a linear interpolation between them. (d) Phase diagram of the 2D TFIM. The blue line represents the critical line separating the ferro- from the paramagnetic phase, the red line denotes the effective temperature of the initial state based on its energy, obtained from QMC simulations, see SM Sup . Our results point towards the existence of a roughening transition at a value of g_{R}/J\approx 1.380 would not violate the Mermin-Wagner theorem due to the infinite local Hilbert space dimension Cuesta and Sánchez 2004 . We consider the classical limit of the effective model, i.e., g/J=0 , and use a transfer matrix based method to calculate the expectation value of the kink operator in the thermal state, see the End Matter and SM for more details Sup . The thermal expectation value of the kink operator shown in Fig. 2 c exhibits an extended regime with a clear signature of smooth interfaces at low temperatures for system sizes up to L_{x}=5\times 10^{5} . However, the turning point shifts with increasing system size and its location behaves perturbatively as T_{R}/J=2\log\left(\frac{2(1-\cos(\alpha))L_{x}}{\log(2)}\right)^{-1}\,, (5) see the inset of Fig. 2 c as well as End Matter and SM Sup . Thus, in the thermodynamic limit L_{x}\rightarrow\infty , roughening occurs immediately for any T>0 . Nonetheless, clear signatures of a smooth interface regime at non-zero temperature survive up to very large system sizes due to the logarithmic dependence of T_{R} on L_{x} , which has especial relevance for current experimental realizations in quantum simulators. Fig. 2 d shows a sketch of the inferred phase diagram in the full two dimensional Ising model, summarizing all the previously discussed results: The ferromagnetic phase encompasses an extended smooth interface regime delimited by a roughening QPT and a system-size dependent crossover at non-vanishing temperatures. We include the effective temperatures fixed by the domain wall initial condition for the range of considered transverse fields g/J , indicating that signatures of a smooth interface regime will vanish already at field strengths below the critical g_{R} . Concerning the non-equilibrium dynamics, this phase diagram suggests that the effective model can thermalize in the smooth domain wall regime, implying stability of domain walls for long times. We will show next that this prediction is even quantitatively accurate for the full dynamics of the two-dimensional TFIM. Dynamical signature of roughening. The effective model covers the subspace of single domain-wall states without bubbles or overhang. To check the validity of this description, we plot the time-dependence of the horizontal domain wall length D_{x}=1/2\sum_{i,j}(\unit-\sigma^{x}_{i,j}\sigma^{x}_{i,j+1}) in Fig. 3 a. The small deviations of \langle D_{x}\rangle/L_{x} from one for transverse fields up to g/J\approx 1 support the validity of the effective model in that regime. We now turn to a direct comparison between the dynamics of the full and the effective model – the latter simulated using MPS. In the full 2D TFIM, the operator probing the vertical position of the domain wall at site i is given by N_{i}=\sum_{j\perp i}j/2\cdot(\unit-\sigma^{x}_{i,j}\sigma^{x}_{i,j+1}) with the sum running over all lattice sites j perpendicular to the domain wall. For a meaningful comparison with the effective model, however, we need to account for bulk contributions such as single spin flips away from the domain wall. For that purpose, we define a modified kink operator K_{\mathrm{M}}=\langle K\rangle/\langle K_{\mathrm{bulk}}\rangle , where \langle K_{\mathrm{bulk}}\rangle is obtained by calculating the kink operator for a system where the interaction along the initial domain wall is removed, i.e., only bulk effects contribute to the time evolution. Since the time-dependent expectation values obtained from the full and the effective model differ in their high frequency fluctuations, we will moreover consider their running time-averages \bar{K}(t)=\frac{1}{t}\int_{0}^{t}dt\langle K(t)\rangle instead for the direct quantitative comparison. See the SM for more details Sup . The time evolution of the modified kink operator in comparison with the kink operator of the effective model is shown in Fig. 3 b. Data for the full model is restricted to transverse fields g/J\leq 1 , since the separation of bulk from interface effects becomes infeasible for larger fields. Figure 3: (a) Time evolution of the horizontal contribution to the domain wall length divided by the horizontal lattice dimension. The plot shows that up until g/J=1 , each column has approximately one horizontal domain wall for the times considered, confirming the validity of the effective model ( 3 ) in that regime. (b) Comparison between the effective (dashed lines/crosses) and the full model (solid lines/circles) for the time evolution of the kink operator. In order to filter out the strong fluctuations of the data we show the running mean of the kink operator. For the full model, we calculate the modified kink operator K_{\mathrm{M}}=\langle K\rangle/\langle K_{\mathrm{bulk}}\rangle . We don’t show data for transverse fields beyond g/J=1 , as bulk and interface contributions become increasingly difficult to disentangle. (c) Late-time averages of the kink operators shown in (b), taken over the interval tJ\in[20,100] , as functions of the transverse field. The values agree well up to g/J=1 , once again confirming the quantitative predictive power of the effective model in that regime. We find very good quantitative agreement between these two models, meaning that the dynamics of interfaces in the TFIM can be understood in terms of the SOS model: For the considered intermediate values of the transverse field, the SOS model thermalizes within the smooth interface regime (cf. Fig. 2 d) and the initially flat domain wall profile remains eternally stable. This stability of the domain wall manifests itself in the full TFIM in the form of prethermal plateaus with \bar{K}_{\mathrm{M}}(t)>0 . In contrast to the effective model, a subsequent decay of these prethermal states is to be expected in the full model, but these timescales seem out of reach for current numerical approaches. Fig. 3 c displays the late-time stationary values of the running, time-averaged kink operator by taking the mean over points lying in the interval tJ\in[20,100] , which once more highlight the compelling quantitative agreement between the SOS model and the TFIM. Results obtained for a 16 by 16 lattice confirm said agreement for larger system sizes, without the need to suppress temporal fluctuations via taking the running mean, see SM Sup for more details. Finally, notice that the imbalance in Fig. 1 b and the kink operator in Fig. 3 b exhibit different lifetimes of the prethermal plateaus. This indicates that restoring the rotational symmetries requires longer times than the restoration of translational symmetry. Discussion. Our analysis establishes a connection between the roughening transition and the relaxation dynamics of quantum interfaces in the 2D TFIM. The stability of domain walls in the smooth interface regime constitutes a new mechanism for pre-thermalization beyond known ones like proximity to an integrable point Moeckel and Kehrein 2008 or Hilbert space fragmentation and quantum scars Moudgalya et al. 2022 , highlighting a qualitative change within the dynamical phase diagram of the TFIM in two dimensions. The domain wall dynamics of the quantum Ising model can be probed experimentally in state of the art Rydberg atomic systems Zeiher et al. 2017 ; Bernien et al. 2017b ; Scholl et al. 2021 ; Manovitz et al. 2024 . Domain wall initial conditions can be prepared via programmable locally controlled light shifts. and recent experiments demonstrate the feasibility of a transversely oriented magnetic field of the required intermediate magnitude Bernien et al. 2017b ; Manovitz et al. 2024 . Our formulation of the effective model remains unchanged for the typical anti-ferromagnetic interactions. Since the imbalance and the kink operator are immediately accessible through snapshot measurements, we expect, that the described phenomenology is readily accessible in current Rydberg atom quantum simulators. An exciting prospect would be the possibility to probe longer time scales in this way. Furthermore, it will be interesting to investigate other initial domain wall configurations in the light of roughening. Examples include the observed self-straightening dynamics of a initial zig-zag configuration Manovitz et al. 2024 and potential implications for false vacuum decay probed via bubble formation Coleman 1977 ; Lagnese et al. 2021 ; Milsted et al. 2022 ; Zenesini et al. 2024 . More generally, the impact of curvature on the phenomenology of the roughening dynamics remains to be explored in a future work. Another immediate question concerns the generalization to other symmetries, since the results presented here rely on a \mathbb{Z}_{2} symmetry-broken phase. Acknowledgements. Acknowledgements. We acknowledge fruitful discussions with A. Segner, J.-D. Urbina, M. Steinhuber, L. Behringer, S. Tomsovic, T. Mendes-Santos, A. Gambassi, U.-J. Wiese. The tree tensor network simulations presented in this work were produced with TTN.jl Tausendpfund et al. 2024 , a software package we developed based on the ITensor library Fishman et al. 2022 . The MPS simulations were performed with the help of ITensor. The QMC simulations were produced with the help of the ALPS software package Bauer et al. 2011 . MS and WK were supported through the Helmholtz Initiative and Networking Fund, Grant No. VH-NG-1711. We acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany’s Excellence Strategy - Cluster of Excellence Matter and Light for Quantum Computing (ML4Q) EXC 2004/1 – 390534769 (NT, MR and MS), under Grant No. 277101999 – CRC network TR 183 (NT and MR), under project 499180199 – FOR 5522 (MH). MH has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 853443). MR and NT acknowledge funding under Horizon Europe programme HORIZON-CL4-2022-QUANTUM-02-SGA via the project 101113690 (PASQuanS2.1). The authors gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gauss-centre.eu) for funding this project by providing computing time through the John von Neumann Institute for Computing (NIC) on the GCS Supercomputer JUWELS Jülich Supercomputing Centre 2021 and through FZJ on JURECA Jülich Supercomputing Centre 2021 at Jülich Supercomputing Centre (JSC). Data and code are available at Krinitsin et al. 2025b . Appendix A End Matter BKT transition of the SOS Model. In this paragraph, we demonstrate that the nature of the transition in the effective SOS model ( 3 ) belongs to the BKT universality class. To this end, we use the VUMPS algorithm Haegeman et al. 2011 ; Haegeman et al. 2016 ; Zauner-Stauber et al. 2018 to study the groundstate properties of the effective model. This allows us to work directly in the thermodynamic limit with a fixed truncation of bosonic excitations {N_{\rm max}}\in 2\Z . In the two-dimensional model, this is equivalent to considering an infinitely long slab of width L_{y}={N_{\rm max}}+1 with the interface oriented along the infinite direction. To observe the critical properties, it is necessary to scale the results against {N_{\rm max}}\to\infty . In practice, we considered {N_{\rm max}}\leq 14 . Since the local Hilbert space scales as \dim(\mathcal{H}_{\rm loc})={N_{\rm max}}+1 , a maximum bosonic occupation of fourteen already leads to very long simulation times of 13\times 10^{3} seconds per iteration for a bond dimension of \chi=600 . In contrast to continuous phase transitions described by the Landau-Ginzburg theory, the BKT transition cannot be detected by the divergence of any derivative of the energy density \epsilon(g) , which is an analytical function of g . This is demonstrated in Fig. 4 a via the example of the first and second derivative of \epsilon(g) . Moreover, we observe that \epsilon(g) and its derivatives are quickly converging in {N_{\rm max}} . Characteristic of the BKT transition is the exponential divergence of the correlation length when approaching the critical value g_{R} , \xi(g)=\xi_{0}\exp\left(\frac{B}{\sqrt{|g-g_{R}|}}\right),\ \mathrm{for}\ gg_{R} . c) Fit of ( 6 ) to the data, showing the correct BKT type divergence law of the correlation length. Increasing {N_{\rm max}} again leads to a better agreement between the data and the expected law. The critical transverse field obtained from the fit for the largest {N_{\rm max}}=14 is g_{R}/J=1.38 . To quantify that \xi(g) has the correct behavior approaching g_{R}/J , we fit \xi(g) for {N_{\rm max}}=14 for 1.11 as can be seen in Fig. S6 b, where the kink operator first drops and then goes up again in time for g/J\geq 1.25 . We want to stress that the observed rising of the kink operator an artifact of the method and not a physical effect. Figure S6: a) Time evolution of the bare, i.e. unmodified kink operator in the 2D TFIM. b) Time evolution of the modified kink operator for transverse fields g/J=1,1.25,1.5 , for both the 2D TFIM and 1D effective model. The plot shows unphysical growth of the modified kink operator for g/J>1 , signaling the breakdown of the assumption that bulk and interface effects can be separated. Plots c) and d) show the modified, kink operator, averaged over the interval tJ\in[20,100] , as a function of c) the angle \alpha and d) the distance l . The distance does not have much influence on how well the effective and full model agree, which is why throughout the work we chose the largest distance possible for our lattice, i.e. l=8 . This is different for the angle where we observe larger deviations for the largest transverse field g/J=1 . The smallest angle which showed the smallest deviations across all values of the transverse fields considered is \alpha=1 , which we used throughout this work. The angle \alpha and distance l , appearing in the calculation of the kink operator allow to tune its sensitivity. In Fig. S6 c and d we show their influence on the time average of the running mean of the kink operator. As expected, K\rightarrow 1 for \alpha\rightarrow 0 . For transverse fields g/J<1 we observe little deviation between the results for the effective and full model. For g/J=1 this is not the case anymore, which is to be expected as we are approaching the roughening transition. For the system sizes considered in this work, we found the value of \alpha=1.0 to provide the best agreement between the effective and full model across all transverse fields of interest, and thus the highest sensitivity to the roughening transition. This can be understood as smaller angles leading to an overall higher sensitivity to boundary and unwanted bulk effects, which due to their large vertical distance from the initial interface provide a big contribution to the kink operator, which in turn is detrimental for the system sizes considered. A larger value of \alpha enhances all contributions to the kink operator, while boundary effects are being ”washed” out due to the cosine function, which will add up larger arguments to 0 due to the rapid sign changes. One thus needs to be careful to not make the angle too large, otherwise the contributions coming from the interface will be lost as well. Figure S6 d shows the effect of changing the distance to l – the effective and full model agree for all transverse fields and distances l=4,6,8 shown here. Results for the kink operator on a 16 by 16 lattice are provided in Figure S7 , in a similar fashion to what has been presented in the main text for an 8 by 8 lattice. Due to the larger overall entanglement, the simulations only provide reliable results up to a timescale of t_{\mathrm{max}}=30 . Figure S7 a) shows the domain wall length contribution coming from horizontally aligned interface lengths, normalized by the length of the lattice in x-direction. Once again this confirms that up to g/J=1 , the number of domain walls per column does not scale extensively with the vertical lattice size. The agreement between the time evolution of the modified kink operator calculated in the full 2D and effective models is shown in Figure S7 b). We want to emphasize that for that comparison we did not utilize the running mean of the modified kink operator as has been done in the main text for the 8 by 8 system. This is because compared to the 8 by 8 system, the kink operator calculated in the 16 by 16 system does not show strong temporal fluctuations, allowing for a direct comparison. The agreement between the two models is made even more apparent when comparing the late time plateau values of the respective kink operators, obtained by taking the mean points within the region tJ\in[5,30] , see Figure S7 c). Figure S7: Kink operator for a 16 by 16 system, evolved up to a time of t_{\max}=30 . a) Time evolution of the horizontal contribution to the domain wall length divided by the horizontal lattice dimension. The plot shows that the number of horizontal domain walls in each column does not scale extensively with the vertical system size, confirming the validity of the effective model in that regime. (b) Comparison between the effective (dashed lines/crosses) and the full model (solid lines/circles) for the time evolution of the kink operator. For the full model, we calculate the modified kink operator K_{\mathrm{M}}=\langle K\rangle/\langle K_{\mathrm{bulk}}\rangle . We don’t show data for transverse fields beyond g/J=1 , as bulk and interface contributions become increasingly difficult to disentangle. (c) Late-time averages over the interval tJ\in[5,30] of the kink operators shown in (b) as functions of the transverse field. The values agree well up to g/J=1 , once again confirming the quantitative predictive power of the effective in that regime. Appendix E Exact Solution of the Classical Limit and Approximations The thermodynamic properties at temperature T=1/\beta of the SOS model in the classical limit g\to 0 are defined by the transfer-matrix V_{s,s^{\prime}}=\exp(-\beta h(s,s^{\prime}))=q^{|s-s^{\prime}|}\,, (S6) with q=\exp(-2J\beta) and s\in\{1,\dots,M\} . Here, we have shifted the range of values for s by one with respect to the main text and defined M={N_{\rm max}}+1 to simplify the notation in the following discussion. We are interested in evaluating the end-to-end kink correlation function given by \braket{K_{\alpha}(L_{x})}=\frac{\mathcal{Z}(\alpha)}{\mathcal{Z}(0)} with the twisted partition function \begin{split}\mathcal{Z}(\alpha)&=\lambda_{1}^{L_{x}-1}\sum_{n=1}^{M}f_{n}^{L_{x}-1}|c_{n}(\alpha)|^{2}\,,\\ c_{n}(\alpha)&=\sum_{s=1}^{M}e^{i\alpha s}\psi_{n}(s)\,,\quad f_{n}=\frac{\lambda_{n}}{\lambda_{1}}\,,\end{split} (S7) where \ket{\psi_{n}}=\sum_{s=1}^{M}\psi_{n}(s)\ket{s} are the eigenvectors of V and \lambda_{n} the corresponding eigenvalues with \lambda_{1} being the largest eigenvalue. The inverse of Eq. ( S6 ) is connected to a single-particle tight-binding Hamiltonian H_{\rm sp} via H_{\rm sp}=(1-q^{2})V^{-1}-(1+q^{2})\unit=-q\,\sum_{s=1}^{M}\left(\ket{s}\bra{s+1}+\mathrm{h.c.}\right)-q^{2}\left(\ket{0}\bra{0}+\ket{M}\bra{M}\right)\,, (S8) which is a standard next nearest neighbor hopping Hamiltonian with additional edge potentials. The eigenvalue and eigenvectors of this tight binding model are known Yueh and Cheng 2008 \psi_{n}(s)=\mathcal{N}\left\{\sin(s\theta_{n})-q\sin((s-1)\theta_{n})\right\}\,,\ \epsilon_{n}=-2q\cos(\theta_{n})\,, (S9) where \ket{\psi_{n}}=\sum_{s}\psi_{n}(s)\ket{s} are the eigenvectors, \mathcal{N} a normalization factor, and the \theta_{n} are defined by the roots of the equation \sin((M+1)\theta_{n})+q^{2}\sin((M-1)\theta_{n})-2q\sin(M\theta_{n})=0\,, (S10) with \theta_{n}\in[0,\pi] . For M\to\infty and q\to 0 , the solutions of this equation become dense in the interval [0,\pi] , with the distance between two solutions vanishing as |\theta_{n+1}-\theta_{n}|\sim 1/M . In first order one finds \theta_{n}=n\pi/(M+1) similar to a homogeneous chain without the additional edge potentials. By inverting Eq. ( S8 ), the eigenvalues of V are given by \lambda_{n}=\frac{1-q^{2}}{1+q^{2}-2q\cos(\theta_{n})}\,, while the eigenvectors are still given by \psi_{n}(s) from Eq. ( S9 ). From the exact expression of the eigenvalues and eigenvectors, we can now proceed to calculate the form factors c_{n}(\alpha) . Note that due to the reflection symmetry of the Hamiltonian ( S9 ) one has \psi_{n}(M-s)=(-1)^{n}\psi_{n}(s) and thus |c_{n}(\alpha)|^{2}=|c_{n}(2\pi-\alpha)|^{2} . Thus it is sufficient to restrict the analysis to \alpha\in[0,\pi] . Using the summation identity \sum_{s=1}^{M}e^{i\alpha s}\sin(s\theta+\delta)=\frac{e^{i\alpha}}{2i}\left(e^{i\frac{\theta(M+1)+2\delta}{2}}g_{M}(\alpha+\theta)-e^{-i\frac{\theta(M+1)+2\delta}{2}}g_{M}(\alpha-\theta)\right)\,,\ g_{M}(x)=\frac{\sin\left(\frac{x}{2}M\right)}{\sin\left(\frac{x}{2}\right)} derived from the finite geometric sum, we find an exact expression for the form factors \begin{split}|c_{n}(\alpha)|^{2}/\mathcal{N}^{2}=&\frac{g_{M}(\theta_{n}+\alpha)^{2}+g_{M}(\theta_{n}-\alpha)^{2}}{4}\left(1+q^{2}-2q\cos(\theta_{n})\right)\\ {}&-\frac{g_{M}(\theta_{n}+\alpha)g_{M}(\theta_{n}-\alpha)}{2}\left(\cos(\theta_{n}(M+1))+q^{2}\cos(\theta_{n}(M-1))-2q\cos(\theta_{n}M)\right)\,.\end{split} (S11) Note that c_{n}(\alpha) has a unique singularity at \theta_{\star}=\alpha coming from the function g_{M}(\theta-\alpha) for \theta , \alpha\in[0,\pi] . Let n_{\star} be the solution to Eq. ( S10 ) with \theta_{n_{\star}} close to \theta_{\star} . The most dominant contribution to the twisted partition function \mathcal{Z}(\alpha) is thus given by the n_{\star} form factor in the large M limit \mathcal{Z}(\alpha)/\lambda_{1}^{L_{x}-1}\approx f_{n_{\star}}^{L_{x}-1}|c_{n_{\star}}(\alpha)|^{2}\,. Since the distance between two solutions vanishes as 1/M in the large M limit, we expect |\theta_{n_{\star}}-\theta_{\star}|\approx\delta/M , where \delta is a constant of order one and independent of \alpha . Expanding c_{n_{\star}} for small \delta/M and keeping only the dominant part, we arrive at |c_{n_{\star}}|^{2}/\mathcal{N}^{2}\approx\frac{M^{2}}{4}\frac{\sin(\delta/2)^{2}}{(\delta/2)^{2}}(1+q^{2}-2q\cos(\alpha))\,, which diverges as expected for M\to\infty . Next consider the weights f_{n} and expand them around n_{\star} f_{n_{\star}}=\frac{\lambda_{n}}{\lambda_{1}}=\frac{1+q^{2}-2q\cos(\theta_{1})}{1+q^{2}-2q\cos(\theta_{n_{\star}})}\approx\frac{\Gamma}{(1-\frac{2q}{1+q^{2}}\cos(\alpha))}\,. Here, \Gamma=\frac{1+q^{2}-2q\cos(\theta_{1})}{1+q^{2}} is a \alpha independent constant. Assuming q small one finds in the L_{x}\to\infty limit f_{n_{\star}}^{L_{x}-1}\approx\Gamma\left(1+\frac{2q}{1+q^{2}}\cos(\alpha)\right)^{L_{x}}\approx\Gamma e^{\frac{2q}{1+q^{2}}\cos(\alpha)L_{x}}\,. Combining the results, we obtain for the end-to-end kink correlator \braket{K_{\alpha}(L_{x})}=\frac{\mathcal{Z}(\alpha)}{\mathcal{Z}(0)}\approx\frac{1+q^{2}-2q\cos(\alpha)}{(1-q)^{2}}\exp\left(-\frac{2q}{1+q^{2}}(1-\cos(\alpha))L_{x}\right)\approx e^{-2q(1-\cos(\alpha))L_{x}}\,, (S12) where the last approximation is valid in the small q and large L_{x} limit. Note that 1-\cos(\alpha)>0 for \alpha\in(0,\pi) , such that \lim_{L_{x}\to\infty}\braket{K_{\alpha}(L_{x})}=0 for all values of \alpha\in(0,\pi) . Fig. S8 a shows the agreement between numerical data and the analytical expectation ( S12 ) for L_{x}=512\cdot 10^{3} and {N_{\rm max}}=200 , confirming the approach presented here. In Fig. S8 b we numerically test the dependence of the results on the maximal bosonic occupation number {N_{\rm max}} for different, color-coded system sizes, establishing that {N_{\rm max}}=200 is sufficient to reliably calculate the kink operator for the system sizes considered here. Figure S8: a) Kink operator as a function of the temperature for system size L_{x}=512\cdot 10^{3} and {N_{\rm max}}=200 . The numerically obtained data points agree very well with the analytical prediction ( S12 ). b) Results for the kink operator as a function of T for different system sizes and maximal bosonic occupation numbers. System sizes considered here lie in L_{x}\in[500,512\cdot 10^{3}] , with exponentially increasing steps. The data points for N_{\rm max}=100,200 lie on top of each other, meaning results are converged in the maximal bosonic occupation number. c) Dependence of the transition temperature on the angle \alpha at L_{x}=512\cdot 10^{3} , following the dependence ( S13 ) (grey, dotted line), obtained from analytical considerations on the transfermatrix. We define the transition temperature in the classical limit by setting \braket{K_{\alpha}(L_{x})}=1/2 , and solving for T/J=-2/\log(q) : T_{R}(L_{x})=2\log\left(\frac{2(1-\cos(\alpha))L_{x}}{\log(2)}\right)^{-1}\,. (S13) This relation is tested numerically by calculating the end-to-end kink correlator both as a function of the system size for a fixed \alpha , see inset of Fig.2 c in the main text, as well as a function of the angle \alpha for fixed system size, see Fig. S8 c. Appendix F Thermalization and level spacing statistics In the main text, we implicitly assume eventual equilibration of the interface initial condition to a homogeneous spin state. To support this claim, which is not trivial and still under debate, we provide an analysis of the level spacing statistics of the exact eigenenergy spectrum E_{i} for a 4 by 5 lattice with PBC in x-direction and OBC in y-direction, analogous to what has been done in the main text for larger system sizes. The level spacing statistics provides a way to determine wether a system is chaotic or integrable, based on results from random matrix theory. An integrable system is characterized by its level spacing statistics following a Poisson distribution, while for a chaotic system it follows the one of a Gaussian orthogonal ensemble (GOE). In order to evaluate the level spacing statistics reliably, one has to first unfold the spectrum, i.e. separate the level spacing from overall changes in the energy scale. This is done via the relation s_{n}=(E_{n+1}-E_{n})\frac{\partial n(E)}{\partial E}|_{E=E_{n}}, (S14) where n(E) is the staircase or cumulative spectral function, returning the number of levels below or at the energy E Abul-Magd and Abul-Magd 2014 . In Figure S9 a) we show results of the unfolded spectrum for two different transverse fields g/J=0.15,0.75 . The level spacing of the larger field clearly resembles the one of a GOE, indicating a chaotic system, which is true also for the smaller transverse field, even though the peak of the distribution starts to travel towards zero level spacing. To summarize, neither of the cases follows the level spacing distribution expected from an integrable system. The mean over the distribution of ratios \tilde{r}_{n}=\frac{\min(d_{n},d_{n-1})}{\max(d_{n},d_{n-1})}, (S15) with d_{n}=E_{n}-E_{n-1} , assumes the value \langle\tilde{r}_{n}\rangle_{\mathrm{Poisson}}\approx 0.38629 or \langle\tilde{r}_{n}\rangle_{\mathrm{GOE}}\approx 0.60266 if the underlying distribution is of Poissonian or GOE type, respectively Atas et al. 2013 . Figure S9 b) presents this quantity as a function of the transverse field, showing that in the considered system of finite size the underlying level spacing statistics closely follows the chaotic one, with minimal deviations towards smaller transverse fields. Hence, we expect eventual thermalization of the system in the non-equilibrium dynamics considered in the main text for all system sizes considered. Figure S9: a) Two examples of the unfolded level spacings at different g/J . The one corresponding to g/J=0.75 clearly agrees with the one predicted from random matrix theory for chaotic systems, while for the smaller g/J=0.15 it starts exhibiting features from both, i.e. the mean level spacing moves towards zero – however the characteristic peak at s_{n}=0 is still missing, distinguishing it from a pure Poisson statistics. b) Mean level-spacing distribution ratio of a 4 by 5 system for different transverse fields. Across all transverse fields considered, the ratio corresponds to a GOE distribution and hence an chaotic system with slight deviations from that expected value at the smallest fields. Appendix G Quantum Monte Carlo The data points in the phase diagram of Fig. 2d) are obtained using the QMC loop -algorithm Evertz et al. 1993 ; Evertz 2003 provided in the ALPS package Bauer et al. 2011 for the critical temperatures (blue line) and using the QMC package written in Rust Hearth 2024 for the effective temperature of the initial state (red line). The points of the blue line are obtained by finding the crossing points of the binder cumulant of the magnetization as a function of temperature for lattice sizes L=8,12,16 , see Fig. S10 a. The points of the red line correspond to the temperature associated with the initial domain wall state on an 8\times 8 lattice at a transverse field g , i.e. the temperature T_{\mathrm{cross}} s.t. the energy E=\mathrm{Tr}\ H\rho_{\mathrm{Gibbs}} of the Gibbs state \rho_{\mathrm{Gibbs}}=\exp{(-H/T_{\mathrm{cross}})} corresponds to the energy of the initial state E_{\mathrm{init}} , see Fig. S10 b. Note, that in order to simulate the conditions for a domain wall state and get the correct effective temperature, we employ periodic boundary conditions on one edge and anti-periodic boundary conditions on the other within the QMC simulation. Data points are obtained using 5\cdot 10^{4} / 1\cdot 10^{5} samples for the critical/actual temperatures, after 1\cdot 10^{4} thermalization steps are performed. These values where chosen such that the estimated error on all the observables considered here lies below 1\% . Figure S10: a) Binder cumulant of the magnetization on a 2D square lattice for three different lattice dimensions. Shown is an example for a transverse field g/J=1 . The crossing point of the three lines marks the critical temperature of the system at said transverse field. b) This plot shows how an effective temperature can be associated to a non-equilibrium state. For that, we find the temperature of an equilibrium state whose energy coincides with the energy of the state we are interested in. This is shown again on the example of g/J=1 for an 8\times 8 lattice. 42 43 44