Computational Study of CO2 Capture by Metallic Nanoparticles in Diethylenetriamine Solution Marcus Vinícius F. Rodrigues, Lucas Lima Bezerra, Leonardo Paes da Silva, Norberto de Kássio Vieira Monteiro Abstract The high concentration of CO2 present in the atmosphere caused by human action is triggering a series of climate disorders worldwide, such as an increase in global temperatures. Therefore, it is necessary to develop new efficient and sustainable technologies to remove excess CO2 gas from the atmosphere. Based on this problem, this work aims to investigate the action of noble metal nanoparticles contained in diethylenetriamine (DETA) on CO2 capture through computational simulations. First, platinum nanoparticles (PtNPs) and palladium nanoparticles (PdNPs) are obtained by the CHARMM-GUI server, and DETA, CO2, and H2O optimizations are based on Density Functional Theory (DFT). Finally, from Molecular Dynamics (MD), the configurations of Interaction Potential Energy (IPE), Radial Distribution Function (RDF), Spatial Distribution Function (SDF) and weak interactions analysis, Non-Covalent Interactions (NCI) and Thermal Fluctuation index (TFI) are used to confirm the best system for CO2 capture. The simulations indicate that PtNP–DETA–H2O–CO2 is the best system, showing the longest stability in the root mean square deviation (RMSD) analysis, the lowest IPE (−16003.61 kJ mol–1); the PtNP in this system has a superior g(r) when compared to the PdNP, and spatial distribution in SDF analysis and the presence of strong interactions and stability between CO2 and DETA are demonstrated in aIGM and TFI images, respectively. These results suggest future application of these materials in a practical structure, like industrial plants. [ao6c03032_0009.webp] [ao6c03032_0008.webp] Introduction Nowadays, one of the biggest challenges is the gradual increase in the global temperature. The main cause of this thermal imbalance is greenhouse gas emissions, which are intensified by anthropic actions like consumption of fossil fuels and forest deforestation. , The greenhouse effect is the heat retention from gases like methane (CH4), water vapor (H2O), and carbon dioxide (CO2). For this reason, the life of various fauna and flora is possible because this effect allows for a milder temperature in the atmosphere. , However, the increase in the concentration of these gases, primarily CO2, which is a product of the combustion of fossil fuels such as oil derivatives and mineral coal, generates a deregulation in temperature in the atmosphere. This increase was studied by the Mauna Loa Observatory, which showed that the acceptable limit of CO2 in the atmosphere (350 ppm) was exceeded in 2022 (421 ppm). , This fuel combustion occurs, for the most part, due to improvements in world energy consumption since the energy matrices used are oil and its derivatives (29.5%), mineral coal (27.2%), and natural gas (23.6%), according to the International Energy Agency (IEA). Besides, the main fuels used in most common vehicles are oil derivatives such as gasoline, diesel, natural gas, and aviation fuel. , Therefore, developing new greenhouse gas capture technologies, especially for CO2, is necessary to reduce global warming and alleviate the climate crisis. In Carbon Capture and Storage (CCS), the process involves four categories: precombustion, chemical looping combustion, oxyfuel combustion, and postcombustion. − The latter is the most adaptable and recommended for studies on generating gas sources. One option for postcombustion CCS is amine-based solvents like diethylenetriamine (DETA). − This solvent presents low reactivity compared to reference solvents like monoethanolamine (MEA), which has high volatility and causes damage to industrial equipment. ,, Another aspect to consider is the CO2 absorption kinetics and the CO2 absorption capacity of DETA, which is superior to MEA due to having more amine groups. − Wu et al. studied DETA modified with hydroxyalkyls for CO2 absorption. Their computational analysis used the DFT method to determine the Gibbs free energy of initial, transitional, and final states of the reactions using the software Gaussian 16 with the B3LYP/6-311++(2d,p) configuration. The results indicated that 2-hydroxypropyl-DETA presented the best results for CO2 capture with a lower free energy barrier and a favorable electrostatic potential (ESP). Another material with good absorption capacity for CCS is metallic nanoparticles (MNPs), particularly noble metals. − These metals have higher catalytic properties in bimetallic alloys or modified surfaces applied in Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) in fuel cells or electrocatalysts. − Besides, these noble metals have applications in other reactions, such as gold used as a catalyst in hydrogen production in the water–gas shift process, beyond platinum, palladium, and rhodium present in automotive exhaust catalysts. Li et al. studied the performance of Na-promoted (Pt–Na) Pt nanoparticles supported in Al2O3 for CO2 capture and selective hydrogenation. The analysis of catalyst tests confirmed the best adsorption for CO2 and selectivity for CO formation at high temperatures (623.15 K) when compared to Mg addition. CO2 capture with MNPs requires solvents for NP formation, such as ionic liquids (IL) , and deep eutectic solvents (DES). − These solvents stabilize the thermodynamic instability of MNPs, avoiding aggregation and preserving their catalytic behavior. , Although there are no reports indicating that DETA can serve as a stabilizing agent, the presence of amine groups in both IL and DES suggests its possible use as a stabilizing agent. Torkzadeh and Moosavi studied the interaction between dicationic ionic liquids (DILs) and CO2. The DILs [Bis­(mim)­C5]­[NTf2]2, [Bis­(mim)­C5-(C4)2]­[NTf2]2 and [N111-C5-mim]­[NTf2]2 were analyzed to verify the effect of cation symmetry and chain length, and the analysis showed that ([Bis­(mim)­C5-(C4)2]­[NTf2]2) interacted better with CO2. Shaikh et al. analyzed choline-based IL amino acids (glycine, alanine, serine, and proline) and other anions (−COOH, −NH2, and −OH) with DMSO for CO2 capture with MD and DFT analysis. Ghaed-Sharaf and Omidvar developed a study with green IL cholinium geranate and DES cholinium geranate, through MD and DFT, which revealed higher interaction for the cholinium geranate IL than the cholinium geranate DES. Li et al. analyzed metal-based ionic liquids (MBILs: [Bmim]­[Cl] and [Bmim]­[FeCl4], [Bmim]2[ZnCl4], [Bmim]2[CuCl4], and [Bmim]­[CrCl4]) to determine their mechanism of capture of CO2 and the effect of metal in absorbing CO2 through MD. It was observed that the highest interactions were between [Bmim]­[Cl] and [Bmim]2[ZnCl4] and CO2. Yang et al. used DFT to study the mechanism for CO2 capture and conversion into methane for photoreduction with Pd MNPs supported on a TiO2 surface, showing that the presence of MNPs improved the reaction performance. Liu et al. reported a study involving the use of an amino acid (l-Met) to form a CO2 hydrate from CO2 liquid, a clathrate for CO2 capture in offshore structures. The computational simulations indicated that l-Met showed a reduction in energy barrier when compared with water and a preferential approximation of CO2 on the hydrophobic amino acid part. These studies showed a direct relationship between amine-based solvents and MNPs for CO2 capture; however, works involving MNPs with amine solvents for CO2 capture through a computational approach still remain poorly explored. Therefore, this work relates the use of Pd and Pt MNPs (PdNPs and PtNPs, respectively) in a DETA solution for CO2 capture through computational simulations. Using MD, the goal was to understand the molecular interactions among CO2, DETA, MNPs, and H2O and identify which interactions are the strongest with CO2. The systems are divided into MNP–DETA–H2O–CO2, MNP–CO2, and DETA–H2O–CO2 and compared to determine the best CO2 capture system. Computational Details Molecular Structures The structures of DETA, CO2, and H2O were optimized using Density Functional Theory (DFT) calculations, which were applied to determine the lowest energy tridimensional structure using B3LYP − as a hybrid functional with the basis set 6-311+G­(d,p), implemented in the Gaussian 09 software. The PdNPs and PtNPs were based on the Atilhan and Aparicio study. The MNPs were spherical, and the number of atoms was 201 for each. The diameters were 17.8 Å for PdNPs and 17.9 Å for PtNPs. First, the MNPs were built in the CHARMM-GUI server in the Nanomaterial Modeler module, and the topology files were converted for the OPLS-AA force field by the TopolGen 1.1_dev script written by Lemkul. shows the structures of the components used in this work. Molecular Dynamics All simulations were performed using the GROMACS software 2021.2 with the OPLS-AA force field, used in previous work involving gas capture. , The CO2 parameters were obtained from Zhu et al., and water molecules were described by the TIP3P method. The 36 DETA, 804 H2O, and 285 CO2 numbers were based on the experimental study of Zhang et al., and the simulations were performed in a cubic box with initial dimensions 12 × 12 × 12 nm3. The systems were divided into three groups: MNP–DETA–H2O–CO2 (PtNP–DETA–H2O–CO2 and PdNP–DETA–H2O–CO2), MNP–CO2 (PtNP–CO2 and PdNP–CO2), and DETA–H2O–CO2. The system’s geometry was optimized using the steepest descent and the gradient conjugate algorithms, with an energy tolerance of 10 kJ mol–1, 105 steps, and 10–4 nm step size. Then, the equilibration was developed by using NVT and NPT ensembles for 400 ps using the LINCS algorithm constraint, the Particle Mesh Ewald (PME) for long-range interactions, and 1.0 nm as the cutoff radius for Coulombic and van der Waals short-range interactions under the periodic boundary conditions (PBC). The NVT ensemble was the first step with the V-rescale thermostat at 303.15 K for all systems, and the second step, the NPT ensemble, utilized the C-rescale barostat with a pressure of 1.029 bar. Finally, the production stage was realized with the Leap-Frog algorithm in 100 ns with the parameters of the equilibration stage. Additionally, Visual Molecular Dynamics (VMD) 1.9.3 was used to visualize MD results; each analysis was performed in triplicate. The Interaction Potential Energy (IPE) , was determined from the sum of the short-range Lennard-Jones and Coulomb energies according to . These energies quantify the affinity between CO2 and MNPs, DETA, and H2O molecules. The N i and N j values are the total number of atoms selected for analysis. V vdW and V elec are related to van der Waals and electrostatic contributions, respectively. 1 [ao6c03032_m001.webp]IPEij=∑iNi∑j≠iNjVvdW(rij)+Velec(rij) Weak Interactions Analysis To identify the weak interactions between MNPs and DETA, H2O, and CO2, the average independent gradient model (aIGM) was used through Multiwfn 3.8 software. This analysis used noncovalent interactions (NCIs), which are illustrated as isosurfaces in selected regions to define the weak intermolecular forces. The MNPs were selected to define isosurfaces and classify interactions with DETA, H2O, and CO2 as follows: strong interactions are indicated by blue color, van der Waals interactions by green color, and repulsive interactions by red color. Thermal fluctuation interaction (TFI) analysis identified the stability of interactions with highly stable ones represented in blue, moderately stable ones represented in green, and weakly stable ones indicated by red color (Figures S1–S3). Finally, the resulting images were generated by the VMD software. Results and Discussion Root Mean Square Deviation (RMSD) RMSD analysis was applied to systems to determine their equilibrium in a range of 0 to 100 ns, represented in . This equilibrium indicates the stability of the system’s components, and the reference selected in this analysis was the entire system. In the PdNP–DETA–H2O–CO2 system (a), equilibrium was reported at approximately 40 ns, while in the PtNP–DETA–H2O–CO2 system (b) and PtNP–CO2 system (d) it was reached at 30 ns, in the PdNP–CO2 system (c) it was reached at 80 ns, and in the DETA–H2O–CO2 system (e) it was reached in 50 ns. The PtNP–DETA–H2O–CO2 system, b, reached equilibrium more quickly than other systems, which indicated that it was the most stable. Furthermore, the insertion of MNPs contributed to reducing RMSD values in a DETA–H2O–CO2 system, indicating good system stability. Average IPE Values presents the average IPE values for the five systems to determine the best interaction with CO2 and, consequently, the best system for CO2 capture, starting from the equilibrium time indicated by the RMSD results. In MNP–CO2 systems, IPE average values were found to be more negative for PtNPs (−4560.20 kJ mol–1) when compared to PdNPs (−3915.87 kJ mol–1). PtNP–DETA–H2O–CO2 demonstrated the highest interactions with CO2 (−16003.61 kJ mol–1) compared with PdNP–DETA–H2O–CO2 (−15867.81 kJ mol–1). Besides, a synergistic effect of MNPs when combined with DETA–H2O was observed, as shown by energy increase compared to the DETA–H2O–CO2 interaction (−15194.25 kJ mol–1). These results suggest that the PtNP–DETA–H2O–CO2 system with lower IPE was the best system for CO2 capture. Even though the IPE value of PtNPs is lower than those of DETA and H2O, the relative contributions of each component account for this disparity, and the MNPs can alter the molecular distribution in the simulation box, thereby permitting synergistic effects and modifying the capture behavior. Radial Distribution Function (RDF) In RDF analysis, the carbon of CO2 was selected for the RDF reference to determine the density of probability around CO2 carbon and determine the most probable component according to refs and . In a, the PdNP–DETA–H2O–CO2 was found to have higher g(r) for the oxygen of H2O (CO2–H2O) followed by DETA nitrogen (CO2–(N)­DETA) and the PdNP (CO2–PdNP). The highest g(r) of CO2 interacting with water presents two solvation layers in 3.0 Å and 4.0 Å, a,b,d), due to the higher amount in the system and even their high solubility. In DETA, the three nitrogens of the molecule presented a strong interaction with CO2, represented by three solvation layers (a,b,d). In b, the PtNP–DETA–H2O–CO2 system, the behavior of interactions was similar to that presented in a, with the densities of the components higher when compared to those of the PdNP–DETA–H2O–CO2 system. In c, the CO2–PdNP and CO2–PtNP systems exhibited similar profiles with a solvation layer in 3.0 Å and 4.0 Å and a rise in g(r). d represents the DETA–H2O–CO2 system, indicating two solvation layers of CO2–H2O and three of CO2–DETA. Compared to a,b, the system profiles of DETA and H2O have the same behavior. Spatial Density Function (SDF) illustrates the spatial probability distribution of a component analyzed using SDF analysis. , As with the RDF, one CO2 molecule was selected in each system to verify the highest SDF around CO2 and to assess similarity with the RDF results, thereby revealing the highest spatial probability of a component and, consequently, the highest interaction. The PdNP–DETA–H2O–CO2 system (a) had major density of water (purple color) around the CO2, followed by DETA (green color) and PdNP (orange color), indicating similarity to the RDF analysis (a). Similar behavior was observed in the PtNP–DETA–H2O–CO2 system (b), where the water spatial density was predominant followed by the DETA molecule and PtNP (blue), which showed a higher density than that of PdNP, suggesting a stronger interaction. The PdNP–CO2 system (c) showed similar interactions with CO2, while the PtNP–CO2 system (d), with a lower spatial density, showed similar interactions with CO2, and the DETA–H2O–CO2 system (e) presented a higher spatial density for water and a lower one for DETA, as shown in a,b. All of these results are confirmed by RDF and IPE analysis, since the most probable interacting molecule is water, followed by DETA and metallic MNPs. Averaged Independent Gradient Model (aIGM) The aIGM analysis of the PdNP and other components of the PdNP–DETA–H2O–CO2 system was performed during all the simulations, and the isosurfaces are shown in . This method was utilized to reveal the type of predominant intermolecular interaction throughout the MD simulation with the MNPs. The blue color represents strong interactions such as hydrogen bonds; the green color represents van der Waals interactions, and the red color represents repulsive interactions such as steric effects. The isosurfaces show the dominance of van der Waals interactions in CO2 and DETA, prevailing over interactions with CO2 alone, followed by DETA and H2O, indicating a low interaction. The CO2 isosurface shows good interaction with the PdNP, presenting effective capture behavior but does not indicate interactions with the nanoparticle and DETA, compromising its activity. The DETA molecule can act as a stabilizing agent in the nanoparticle, preventing aggregation with other MNPs and thereby improving its adsorbing activity. illustrates the interactions of the PtNP isosurface in the PtNP–DETA–H2O–CO2 system with DETA, H2O and CO2. In the PtNP system, the DETA isosurface (b) showed a homogeneous distribution of DETA with van der Waals interactions being dominant but also some points in red and blue. The CO2 isosurface (a) proved to be smaller than that with the PdNP (a), therefore revealing blue colors, indicating the presence of strong interactions, and the H2O isosurfaces (c) are irrelevant, as they were in the PdNP system (c). The effective DETA interaction with the PtNP explains the high IPE value in , where DETA and PtNP show a synergistic effect for CO2 capture. Furthermore, this suggests that DETA could serve as a possible stabilizing agent for PtNP synthesis. In , the aIGM of the PdNP–CO2 and PtNP–CO2 systems is presented. The PtNP–CO2 isosurface (b) appears predominantly green and blue, dispersed throughout the nanoparticle volume, indicating van der Waals and strong interactions. Although a similar effect was observed for the PdNP (a), the isosurface colors differed, with the PtNP exhibiting colors more intense than the PdNP, which showed predominantly red hues, indicating repulsive interactions. In Figure S3, the TFI analysis showed the PtNP with a presence of blue color in its isosurface, indicating strong stability with CO2, which can explain the good interaction with CO2. Conclusions The simulations revealed that the PdNP, PtNP, DETA, and H2O interact favorably with CO2, with the PtNP–DETA–H2O–CO2 system exhibiting the strongest interaction. For the PtNP–DETA–H2O–CO2 system, the RMSD graph indicates the most stable system, IPE values exhibit lower energy, RDF analysis shows higher g(r), and SDF analysis illustrates the highest spatial density. Furthermore, the aIGM images showed stronger interactions between PtNPs and CO2 and DETA molecules around the MNPs, indicating a possible stabilizing agent for CO2 capture, and TFI analysis confirmed the highest stability interaction of PtNPs with CO2, and the DETA molecules in the PtNP–DETA–H2O–CO2 system were more distributed than those in the PdNP–DETA–H2O–CO2, showing a stabilization between PtNPs and DETA, which can contribute to their synergetic effect.