Cobalt-Catalyzed Enantioselective Intermolecular C–H Carboamination with Racemic Allenes Lenin Kumar Verdhi, Nicolai Cramer Abstract Enantioselective carboamination of allenes especially in conjunction with 3D-metal catalysis remains a significant challenge. We report chiral cyclopentadienyl cobaltIII-catalyzed regio-, chemo-, and enantioselective intermolecular C–H carboamination of racemic allenyl esters with N-phenoxyisobutyramides. The protocol offers an efficient approach for highly selective carboamination of allenes and affords synthetically valuable chiral γ-substituted-β-enamido esters with exceptional selectivities (up to 88% yield, >99:1 er, and >20:1 E/Z). Operating by a kinetic resolution pathway, the transformation was additionally optimized for recovery of enantioenriched allenes with high selectivity factors of up to 138. The utility was showcased by the resolution of methyl-(R,E)-(−)-tetradeca-2,4,5-trienoate, the male bean weevil pheromone. [ja6c14940_0009.webp] [ja6c14940_0007.webp] Introduction Carboamination is a pivotal synthetic transformation that enables the simultaneous formation of a carbon–carbon and a carbon–nitrogen bond across π-compounds, thereby generating desirable molecular complexity in a single step. − Achieving this transformation in an intermolecular enantioselective manner through transition metal-catalyzed C–H functionalization offers an efficient and atom-economical approach, making it an attractive strategy in stereoselective synthesis. Substantial advancements have been made in enantioselective intermolecular C–H carboamination of alkenes, acrylates, conjugated 1,3-dienes, and alkynes, particularly by using rhodium-catalyzed C–H functionalization (B). However, related technologies for the asymmetric C–H carboamination of cumulated dienes, such as allenes, remain largely unexplored. Although allenes have been shown as competent coupling partners in C–H functionalization reactions, , the enantioselective carboamination of allenes remains an unmet challenge. Compared to carboamination of olefins, the carboamination of allenes poses several key challenges. First, the selective addition of concurrent carbon and nitrogen fragments across the two orthogonal π-bonds of an unsymmetrical 1,3-disubstituted allene requires precise control over regio-, chemo-, and stereoselectivity (C). A tight control of competing processes such as annulation, proto-demetalation, or β-hydride elimination during the transformation further complicates achieving selectivity. In addition to selectivity concerns, employing racemic allenes with built-in axial chirality as coupling partners introduces two distinct mechanistic challenges. First, attack on the central carbon atom of the allene would lead to the metal-π-allyl intermediate and both enantiomers converge to forming a chiral allyl amine via a dynamic kinetic asymmetric transformation (DYKAT) (D, path A). , Alternatively, an attack on either termini of the allene would form a metal-alkenyl intermediate. In this case, a kinetic resolution process can be envisioned where the matching enantiomer of the allene may preferentially react, leaving the disfavored enantiomer untouched (D, path B). The formation of either metal-π-allyl or metal-alkenyl intermediates is influenced by the electronic and steric profile of the allenes, the nature of the substrate-directing group, and the choice of the metal chiral catalyst. Besides a RhIII-catalyzed achiral intermolecular C–H carboamination of achiral trisubstituted sulfonyl allenes with N-phenoxy amides resulting in allylic amines, other reactionsespecially enantioselective C–H carboamination of alleneshave not been documented to date. In recent years, earth-abundant 3d-metal cobalt-catalyzed asymmetric C–H functionalizations have emerged as alternatives to precious-metal RhIII- and IrIII-based methods. , In this respect, high-valent cyclopentadienyl CoIII-complexes − display remarkable selectivities that complement the reactivities of RhIII-complexes and have also enabled access to uncharted reactivity opportunities. , Given the current dearth of C–H carboamination methods for allenes, we sought to develop cobalt-catalyzed enantioselective intermolecular C–H carboamination of racemic 1,3-disubstituted allenes. Hence, the application of chiral cyclopentadienyl cobalt-catalyzed C–H functionalizations to address previously inaccessible asymmetric C–H carboamination of allenes represents a significant research advance. Herein, we report a CpxCoIII-catalyzed highly regio-, chemo-, and enantioselective intermolecular C–H carboamination of racemic allenyl esters with N-phenoxyisobutyramides (E). The developed protocol allows for rapid access to versatile chiral γ-substituted-β-enamido esters with excellent enantioselectivities (>99:1 er) and E/Z selectivity (>20:1). Advantageously, the resulting products can be diastereoselectively reduced under catalyst control to β-amino esters with two contiguous stereocenters. The process operating by a kinetic resolution can be optimized for allene recovery affording enantioenriched allenes with selectivity factors of up to 138. Results and Discussion Reaction Optimization We commenced the optimization of C–H carboamination by using N-phenoxyisobutyramide 1a as a source of both carbon and nitrogen fragments and rac-allenyl ester 2a as model substrates (). Silver hexafluoroantimonate was used as a halide abstractor, and a combination of cesium pivalate and potassium phosphate was employed as a base. In a preliminary reaction scouting using Cp*Co­(CO)­I2 in TFE solvent at 23 °C afforded the carboamination product 3aa in 36% yield as a single regioisomer (entry 1). When the reaction was performed with (Cp*RhCl2)2 as the catalyst, 3aa was obtained in 23% yield (entry 2), indicating a reactivity preference for the cobalt catalyst. Catalyst Co1, featuring a disubstituted chiral Cpx ligand, was completely ineffective and did not produce 3aa (entry 3). In sharp contrast, the trisubstituted CpxCoIII complex Co2 (R = iPr) yielded 3aa in 43% yield with excellent enantioselectivity of 99:1 er (entry 4). The bulkier version Co3 (tBu instead of iPr) provided 3aa in 45% yield with an even higher of >99:1 er (entry 5). Similarly, catalyst Co4 delivered 3aa with an improved yield of 53%, maintaining the outstanding selectivity (entry 6). With Co4, switching to HFIP as a solvent increased the yield of 3aa to 68% with >99:1 er (entry 7). Screening alternative halide scavengers AgOTf, AgBF4, and AgPF6 did not substantially affect the reaction outcome (entries 8–10). Using AgPF6 as a halide scavenger, a higher concentration of 0.4 M gave the yield of 3aa to 67% (entry 11). Replacing CsOPiv by Bu4NOPiv improved the yield of 3aa to 76% (entry 12), presumably due to the higher solubility of Bu4NOPiv. Increasing the stoichiometry of AgPF6 from 20 mol % to 25 mol % further improved the yield of 3aa to 80% (entry 13). Finally, increasing the amount of allenyl ester rac-2a gave 3aa in 87% as a single double bond isomer with >99:1 er (entry 14). Substrate Scope With optimized C–H carboamination conditions, the generality of the reaction was studied next (). As such, varying the electronic nature of substituents at the para-position of phenoxyisobutyramides 1x did not affect the reactivity or selectivity of the reaction. Both electron-donating (Me, tBu) and electron-withdrawing (CF3, CO2Me) groups are compatible with the transformation and delivered the corresponding carboaminated phenols 3ba–3fa in good yields and enantioselectivities exceeding 99:1 er. Phenoxyisobutyramides bearing para-halogen substitution (1g–1i) were tolerated and furnished the corresponding products 3ga–3ia with similar high enantioselectivity. Phenoxyisobutyramides bearing meta-substituents 1j,1k were reacted with allene 2a, affording the desired carboamination products 3ja,3ka exclusively as single regioisomers. Ortho-fluoro-substituted phenoxyisobutyramide 1l reacted smoothly with allene 2a to give product 3la in 82% yield and 99:1 er. Ortho-methyl-substituted phenoxyisobutyramide 1m showed sluggish reactivity and gave the product 3ma in reduced yield, albeit a consistent high selectivity 99:1 er. Using 3,4-dimethyl-substituted phenoxyisobutyramide 1n, corresponding phenol 3na was isolated in 72% yield and 99.5:0.5 er. Naphthyloxyisobutyramide 1o gave naphthol 3oa without compromising enantioselectivity. A fully diastereoselective carboamination of tyrosine derivative 1p with allene 2a proceeded successfully, and product 3pa was obtained in 79% yield with an exquisite diastereoselectivity (99.5:0.5). Employing the opposite enantiomer of the chiral cobalt catalyst (ent-Co4), the other dia-3pa was obtained with excellent diastereoselectivity (99.5:0.5) evidencing a full catalyst control of the transformation. In general, for substrates 1a–1p, the carboamination products were obtained in high yields, with high enantioselectivity (>99:1 er) and E/Z selectivity (>20:1). Noteworthily, switching the isobutyramide group to a carbamate reversed the E/Z selectivity and resulted in the Z-selective carboamination product as a major product. Cbz-protected phenoxyamine 1q gave corresponding Cbz-bearing compound 3qa with a Z/E ratio 3.3:1. The selectivity switch of the reaction from E to Z did not affect the enantioselectivity, and 3qa was obtained with 99:1 er. Methyl phenoxycarbamate 1r provided product 3ra with a Z/E ratio of 3:1 and similarly high selectivity. In addition, Fmoc-carbamate 1s reacted in an analogous manner providing Fmoc-protected enamide 3sa (Z/E = 5.2:1) in high enantioselectivity. Next, we tested the reactivity of a diverse set of allenes with our C–H carboamination. Substituting the ethyl ester of the allene with either tert-butyl (2b) or benzyl ester (2c) had no influence on the reaction outcome. Allenamide 2d participated in the reaction, affording 3ad with 99.5:0.5 er. Noteworthily, allenylphosphonate 2e underwent reaction smoothly, furnishing vinylphosphonate 3ae in 71% yield with 98.5:1.5 er. Allenyl esters bearing methyl (2f), longer alkyl chain (C8H17) (2g), phenethyl (2h), and benzyl group (2i) substitution were compatible, providing the corresponding products 3af–3ai consistently in high yields and enantioselectivities. Phenyl-substituted allenyl ester (2j) resulted in diminished yields of 3aj with 99:1 er, likely due to steric hindrance of the phenyl group. A moderate yield was as well observed for cyclopropyl-substituted allenyl ester (2k), giving 40% yield and 99.5:0.5 er. Further concerning functional group compatibilities, allenyl ester containing alkyl ester (2l), alkoxy ether (2m), alkyl chloride (2n), and alkyl phthalimide (2o) functionalities at the γ-position were successfully subjected to C–H carboamination. Single-crystal X-ray crystallographic analysis of 3ao allowed the determination of the absolute configuration to be (R) and the double bond geometry to be (E). Allenyl ester 2p having an additional terminal olefin moiety that potentially engages with the cyclometalated intermediate reacted exclusively at the allene functionality. No carboamination of the terminal olefin was observed. Using slightly modified reaction conditions, 1,3-dipropylallene 2q also underwent reaction, delivering the corresponding carboamination product 3aq in 71% yield and 99.5:0.5 er. Subsequently, we investigated the unsymmetrical, dialkyl-substituted 1-methyl-3-pentyl allene (2r), which presents a significant challenge due to the absence of electronic bias. The reaction proceeded giving a synthetically useful 3.9:1 mixture of regioisomeric products 3ar and 3ar′ in 61% combined yield with excellent enantioselectivity for both compounds. The major regio-isomer (3ar) is formed preferentially via functionalization of the less sterically hindered methyl-substituted allenic double bond. Moreover, cyclic racemic allene 2s engaged in reaction. Finally, subjecting beetle pheromone 2t featuring allene functionality to the reaction conditions yielded the corresponding product 3at in 61% (E) yield with 99.5:0.5 er. Proposed Reaction Mechanism and Mechanistic Investigations A plausible catalytic cycle for C–H carboamination of allenes is illustrated in . The reaction is initiated by coordination of the cobalt catalyst to the substrate nitrogen atom of 1a. A CMD-style ortho-C–H activation of N-phenoxyisobutyramide gives cobaltacycle I. There are two possible scenarios leading to the observed enantioselectivity of the transformation. In pathway A, intermediate I strongly discriminates between the allene enantiomers. Almost exclusively, the matching enantiomer 2a engages in coordination and subsequent migratory insertion at the most reactive terminal carbon atom of the allene, leading to Co-alkenyl intermediate II. The regio- as well as E/Z-selectivity is determined in this insertion, favoring an E-geometry and placement of cobalt distal to the ester. Ensuing reductive elimination and subsequent oxidative addition to N–O bond generates intermediate III. Finally, protonation of the cobalt–nitrogen bond releases product 3aa and regenerates the cobalt catalyst. In this scenario, the mismatched enantiomer of 2a enriches during the reaction. Alternatively, in situ racemization of the allene could occur under the reaction conditions. Due to continuous racemization, a suitable concentration of the reactive matching allene enantiomer is maintained throughout the process. This pathway B leads to dynamic kinetic resolution mechanism, allowing for the complete conversion of racemic allene into the carboamination product. To gain mechanistic insights on the operative allene incorporation mechanics and to determine whether carboamination proceeds via a kinetic resolution or a dynamic kinetic resolution, a small set of control experiments was conducted. When two equivalents of racemic allene 2a were used in carboamination with phenoxyisobutyramide 1a, we recovered 42% of unreacted allene 2a, besides carboamination product 3aa (40% yield and 99.5:0.5 er) after 20 h. The optical purity of recovered allene 2a was measured at 92:8 er. Such optical enrichment of allene 2a agrees with a kinetic resolution process pathway A. Encouraged by this result, further reaction optimization using 0.6 equiv of 1a resulted in 40% recovery of allene 2a with an improved selectivity of 97.5:2.5 er. In a racemization study, enantio-enriched (S)-2a was separately exposed to [Co4] and ent- [Co4] under standard reaction conditions in the absence of substrate 1a. In both cases, only minimal erosion of the optical purity of (S)-2a was observed, and the allene was recovered in 65% and 57% yields, respectively. These results speak against dynamic kinetic resolution pathway B and confirm that the reaction proceeds via kinetic resolution pathway A. Kinetic Resolution of Allenes via C–H Carboamination To take advantage of the process, we further investigated the kinetic resolution of allenes. Although methods for the kinetic resolution of allenes are reported, to our knowledge, the use of C–H functionalization technology has not been used for such purposes. Without doubt, chiral allenes serve as versatile precursors for the synthesis of complex molecular scaffolds as well as signature functional groups of numerous bioactive natural products. Owing to synthetic utility of chiral allenes, we applied our modified C–H carboamination methodology for the resolution and recovery of allenes (). Subjecting allenyl ethyl ester (2a) to kinetic resolution conditions, chiral allenyl ester (S)-2a was recovered in 40% yield with 97.5:2.5 er, which corresponds to a selectivity factor of 22. A switch to benzyl ester substrate 2c resulted in a slight reduction in er for the recovered allene. Allene phosphonate 2e was resolved with an excellent selectivity factor of 138. Allenyl esters bearing phenethyl (2h) and benzyl group (2i) substituents were recovered in 41% and 40% yields with 95:5 er and 96.4 er, respectively. Allene 2l with an alkyl ester substituent was recovered in 99.5:0.5 er, corresponding to an s-factor of 116. Alkyl chloride (2n) and phthalimide (2o) substituted allenic esters were recovered with 97:3 er and 93.5:6.5 er, respectively. The absolute configuration of the recovered allenes was assigned as S by comparing their optical rotation data with that of the known chiral allene 2c. To illustrate synthetic utility, the method was used to the resolve racemic allenic ester rac-2t to methyl (−)-2,4,5-tetradecatrienoate (R,E)-2t, the sex pheromone of the male dried bean weevil (Acanthoscelides obtectus). Subjecting rac-2t to the standard kinetic resolution conditions using the Co4 catalyst afforded the unnatural enantiomer (S,E)-(+)-2t in 33% yield with an excellent selectivity of 99:1 er. Conducting the reaction with ent-Co4 as the catalyst provided the natural enantiomer of the insect pheromone (R,E)-(−)-2t in 34% yield and 97.5:2.5 er. The absolute configuration of both resolved pheromones was confirmed by comparison of their optical rotations with literature values for (R,E)-(−)-2t. Product Derivatization and Synthetic Utility Next, the synthetic utility of the carboamination products was studied. A diastereoselective hydrogenation of these β-enamido esters would provide direct access to synthetically valuable chiral β-amino acid derivatives possessing two contiguous stereocenters. Applying a rhodium-monodentate phosphoramidite hydrogenation method using Rh­(COD)2BF4 and the phosphoramidite ligand (S)-5 to 3aa gave β-amino ester 4a in 69% yield as a single diastereomer (). Notably, usage of (R)-5 gave an alternate diastereomer 4b with an excellent diastereoselectivity of >20:1, evidencing a fully catalyst control of the selectivity. The efficient hydrogenation method was effective for selected substrates furnishing corresponding β-amino esters 4c–4e in 71–82% yields and with full diastereoselectivities (>20:1). The absolute configuration of the newly formed stereocenter was assigned to be (S) by single-crystal X-ray crystallographic analysis of 4d. To further demonstrate synthetic practicality and to additionally take advantage of the free phenol hydroxy group formed during the transformation, an intramolecular cyclization of 3an (99.5:0.5 er) provided 4-substituted chromane 6 in 67% yield without any erosion of enantioselectivity (). Conclusion In summary, we have developed an efficient CpxCoIII-catalyzed highly regio-, chemo-, and enantioselective intermolecular C–H carboamination of racemic allenes. In this protocol, phenoxyisobutyramides were utilized as sources of both carbon and nitrogen fragments. A broad range of phenoxyisobutyramides with diverse electronic substituents are compatible with the carboamination process. The transformation provides direct access to synthetically important chiral γ-substituted-β-enamido esters with exceptional selectivities (>99:1 er and >20:1 E/Z) convertible to β-amino acid derivatives with two contiguous stereocenters. This reaction protocol is amenable to a diverse array of allenes, including allenamides, allene phosphonates, dialkyl-substituted, as well as cyclic allenes. Moreover, the reaction was extended to a kinetic resolution pathway, affording enantioenriched allenes with up to 99.5:0.5 er and s-factors up to 138. The resolution was exploited to access both enantiomers of methyl-tetradeca-trans-2,4,5-trienoate, the male bean weevil (Acanthoscelides obtectus) pheromone. Experimental Section All experimental procedures, catalyst preparation protocols, reaction optimization details, characterization data, and stereochemical assignments are provided in the Supporting Information. The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/jacs.6c14940. - Synthetic procedures, characterization data for all new compounds, and crystallographic data for 3ao and 4d (PDF) The manuscript was written through contributions of all authors. All authors have given approval to the final version of the manuscript. This work was supported by the EPFL and NCCR Catalysis (grant no. 180544), a National Centre of Competence in Research, funded by the Swiss National Science Foundation. The authors declare no competing financial interest.