The genome sequence of the Argent & Sable moth, Rheumaptera hastata (Linnaeus, 1758) (Lepidoptera: Geometridae) Authors: Vlad Dincă, Marko Mutanen, Charlotte J. Wright, Joana I. Meier, Mark L. Blaxter, Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team, Wellcome Sanger Institute Scientific Operations: Sequencing Operations, Wellcome Sanger Institute Tree of Life Core Informatics team, Tree of Life Core Informatics collective, Project Psyche Community, Laura Jimenez Burney, Jinmu Kim, Xue Qing Published: 2026 ABSTRACT We present a genome assembly from an individual male Rheumaptera hastata (Argent & Sable; Arthropoda; Insecta; Lepidoptera; Geometridae). The assembly contains two haplotypes with total lengths of 589.77 megabases and 588.77 megabases. Most of haplotype 1 (99.85%) is scaffolded into 31 chromosomal pseudomolecules, including the Z sex chromosome. Haplotype 2 was assembled to scaffold level. The mitochondrial genome has also been assembled, with a length of 15.57 kilobases. This work is part of Project Psyche, a collaborative programme generating genomes for European butterflies and moths. Species taxonomy Eukaryota; Opisthokonta; Metazoa; Eumetazoa; Bilateria; Protostomia; Ecdysozoa; Panarthropoda; Arthropoda; Mandibulata; Pancrustacea; Hexapoda; Insecta; Dicondylia; Pterygota; Neoptera; Endopterygota; Amphiesmenoptera; Lepidoptera; Glossata; Neolepidoptera; Heteroneura; Ditrysia; Obtectomera; Geometroidea; Geometridae; Larentiinae; Rheumaptera; Rheumaptera hastata (Linnaeus, 1758) (NCBI:txid691601). Background Rheumaptera hastata (Linnaeus, 1758) ( Figure 1) is a Holarctic geometrid moth with a wide European distribution, largely absent from Mediterranean lowlands but extending north of the Arctic Circle and occurring through montane regions, including the central Alps (GBIF Secretariat, 2025; Wagner, 2025). It occupies bogs, blueberry-rich moist mountain forests and alpine dwarf-shrub belts. The larvae live in spun leaf ‘bags’ on Vaccinium spp. and Rhododendron spp., with additional use of Betula and Salix, and, in some Atlantic–boreal sites, Myrica gale ( Wagner, 2025; Wigglesworth et al., 2007). Adults fly from May to July, depending on altitude, and larvae are typically found from late June to September ( Wagner, 2025). In parts of Scandinavia and the Alps it can be locally frequent, but elsewhere habitat loss (especially of bogs) and homogenised production forestry are noted pressures ( Wagner, 2025; Wigglesworth et al., 2007). Image of Rheumaptera hastata ssp. thulearia from near Laugarfell, Iceland. Photograph by Pjt56. We present a chromosome-level, haplotype-resolved genome sequence of the Argent & Sable, Rheumaptera hastata, sequenced as part of Project Psyche ( Wright et al., 2025). The sequence data were derived from a male specimen collected from Otravaara, North Karelia, Finland. Methods Sample acquisition The specimen used for genome sequencing was an adult male Rheumaptera hastata (specimen ID SAN28000250, ToLID ilRheHast1), collected from Otravaara, North Karelia, Finland (latitude 61.8916, longitude 30.1237; elevation 110 m) on 2023-06-01. The specimen was collected and identified by Vlad Dincă (University of Oulu). Nucleic acid extraction Protocols for high molecular weight (HMW) DNA extraction developed at the Wellcome Sanger Institute (WSI) Tree of Life Core Laboratory are available on protocols.io ( Howard et al., 2025). The ilRheHast1 sample was weighed and triaged to determine the appropriate extraction protocol. Tissue from the whole organism (30 mg) was homogenised by powermashing using a PowerMasher II tissue disruptor. HMW DNA was extracted in the WSI Scientific Operations core using the Automated MagAttract v2 protocol. DNA was sheared into an average fragment size of 12–20 kb following the Megaruptor®3 for LI PacBio protocol. Sheared DNA was purified by automated SPRI (solid-phase reversible immobilisation). The concentration of the sheared and purified DNA was assessed using a Nanodrop spectrophotometer and Qubit Fluorometer using the Qubit dsDNA High Sensitivity Assay kit. Fragment size distribution was evaluated by running the sample on the FemtoPulse system. For this sample, the final post-shearing DNA had a Qubit concentration of 58.86 ng/μL and a yield of 2 766.42 ng, with a fragment size of 16.7 kb. RNA was extracted from whole organism tissue of ilRheHast1 in the Tree of Life Laboratory at the WSI using the RNA Extraction: Automated MagMax™ mirVana protocol. The RNA concentration was assessed using a Nanodrop spectrophotometer and a Qubit Fluorometer using the Qubit RNA Broad-Range Assay kit. Analysis of the integrity of the RNA was done using the Agilent RNA 6000 Pico Kit and Eukaryotic Total RNA assay. PacBio HiFi library preparation and sequencing Library preparation and sequencing were performed at the WSI Scientific Operations core. Libraries were prepared using the SMRTbell Prep Kit 3.0 (Pacific Biosciences, California, USA), according to the manufacturer’s instructions. The kit includes reagents for end repair/A-tailing, adapter ligation, post-ligation SMRTbell bead clean-up, and nuclease treatment. Size selection and clean-up were performed using diluted AMPure PB beads (Pacific Biosciences). DNA concentration was quantified using a Qubit Fluorometer v4.0 (ThermoFisher Scientific) and the Qubit 1X dsDNA HS assay kit. Final library fragment size was assessed with the Agilent Femto Pulse Automated Pulsed Field CE Instrument (Agilent Technologies) using the gDNA 55 kb BAC analysis kit. The sample was sequenced on a Revio instrument (Pacific Biosciences, California, USA). Prepared libraries selected for multiplexing were pooled based on genome size, library molarity, and the intended plex level. Primers were annealed and polymerases were bound to generate circularised complexes, following the manufacturer’s instructions. Complexes were purified using SMRTbell beads, diluted to the Revio loading concentration, and spiked with a Revio sequencing internal control. The pooled libraries were sequenced on a Revio 25 M Plex SMRT cell in a 4-plex run. SMRT Link software (Pacific Biosciences), a web-based workflow manager, was used to configure and monitor the run and to carry out primary and secondary data analysis. Specimen details, sequencing platforms, and data yields are summarised in Table 1. Table 1. Specimen and sequencing data for Rheumaptera hastata (BioProject PRJEB80082).PlatformPacBio HiFiHi-C RNA-seq ToLID ilRheHast1ilRheHast1ilRheHast1 Specimen ID SAN28000250SAN28000250SAN28000250 BioSample (source individual) SAMEA115575585SAMEA115575585SAMEA115575585 BioSample (tissue) SAMEA115575613SAMEA115575613SAMEA115575613 Tissue whole organismwhole organismwhole organism Instrument RevioIllumina NovaSeq XIllumina NovaSeq X Run accessions ERR13660093ERR13670052ERR14986715 Read count total 2.03 million reads316.97 million read pairs70.40 million read pairs Base count total 20.56 Gb95.72 Gb21.26 Gb Specimen and sequencing data for Rheumaptera hastata (BioProject PRJEB80082). Hi-C Sample preparation and crosslinking The Hi-C sample was prepared from 20–50 mg of frozen tissue from the whole organism of the ilRheHast1 sample using the Arima-HiC v2 kit (Arima Genomics). Following the manufacturer’s instructions, tissue was fixed and DNA crosslinked using TC buffer to a final formaldehyde concentration of 2%. The tissue was homogenised using the Diagnocine Power Masher-II. Crosslinked DNA was digested with a restriction enzyme master mix, biotinylated, and ligated. Clean-up was performed with SPRISelect beads before library preparation. DNA concentration was measured with the Qubit Fluorometer (Thermo Fisher Scientific) and Qubit HS Assay Kit. The biotinylation percentage was estimated using the Arima-HiC v2 QC beads. Hi-C library preparation and sequencing Biotinylated DNA constructs were fragmented using a Covaris E220 sonicator and size selected to 400–600 bp using SPRISelect beads. DNA was enriched with Arima-HiC v2 kit Enrichment beads. End repair, A-tailing, and adapter ligation were carried out with the NEBNext Ultra II DNA Library Prep Kit (New England Biolabs), following a modified protocol where library preparation occurs while DNA remains bound to the Enrichment beads. Library amplification was performed using KAPA HiFi HotStart mix and a custom Unique Dual Index (UDI) barcode set (Integrated DNA Technologies). Depending on sample concentration and biotinylation percentage determined at the crosslinking stage, libraries were amplified with 10–16 PCR cycles. Post-PCR clean-up was performed with SPRISelect beads. Libraries were quantified using the AccuClear Ultra High Sensitivity dsDNA Standards Assay Kit (Biotium) and a FLUOstar Omega plate reader (BMG Labtech). Prior to sequencing, libraries were normalised to 10 ng/μL. Normalised libraries were quantified again to create equimolar and/or weighted 2.8 nM pools. Pool concentrations were checked using the Agilent 4200 TapeStation (Agilent) with High Sensitivity D500 reagents before sequencing. Sequencing was performed using paired-end 150 bp reads on the Illumina NovaSeq X. Specimen details, sequencing platforms, and data yields are summarised in Table 1. RNA-seq library preparation and sequencing Libraries were prepared using the NEBNext ® Ultra™ II Directional RNA Library Prep Kit for Illumina (New England Biolabs), following the manufacturer’s instructions. Poly(A) mRNA in the total RNA solution was isolated using oligo (dT) beads, converted to cDNA, and uniquely indexed; 14 PCR cycles were performed. Libraries were size-selected to produce fragment lengths of 100–300 bp. Libraries were quantified, normalised, pooled to a final concentration of 2.8 nM, and diluted to 150 pM for loading. Sequencing was carried out on the Illumina NovaSeq X to generate 150-bp paired-end reads. Genome assembly Prior to assembly of the PacBio HiFi reads, a database of k-mer counts ( k = 31) was generated from the filtered reads using FastK. GenomeScope2 ( Ranallo-Benavidez et al., 2020) was used to analyse the k-mer frequency distributions, providing estimates of genome size, heterozygosity, and repeat content. The HiFi reads were assembled using Hifiasm in Hi-C phasing mode ( Cheng et al., 2021, 2022), producing two haplotypes. Hi-C reads ( Rao et al., 2014) were mapped to the primary contigs using bwa-mem2 ( Vasimuddin et al., 2019). Contigs were further scaffolded with Hi-C data in YaHS ( Zhou et al., 2023), using the --break option for handling potential misassemblies. The scaffolded assemblies were evaluated using Gfastats ( Formenti et al., 2022), BUSCO ( Manni et al., 2021) and MERQURY.FK ( Rhie et al., 2020). The mitochondrial genome was assembled using MitoHiFi ( Uliano-Silva et al., 2023), which runs MitoFinder ( Allio et al., 2020) and uses these annotations to select the final mitochondrial contig and to ensure the general quality of the sequence. Assembly curation The assembly was decontaminated using the Assembly Screen for Cobionts and Contaminants ( ASCC) pipeline. TreeVal was used to generate the flat files and maps for use in curation. Manual curation was conducted primarily in PretextView and HiGlass ( Kerpedjiev et al., 2018). Scaffolds were visually inspected and corrected as described by Howe et al. (2021). Manual corrections included 12 breaks and 47 joins. This reduced the scaffold count by 25.3% and increased scaffold N50 by 0.8%. The curation process is described at https://gitlab.com/wtsi-grit/rapid-curation . PretextSnapshot was used to generate a Hi-C contact map of the final assembly. Assembly quality assessment The Merqury.FK tool ( Rhie et al., 2020), run in a Singularity container ( Kurtzer et al., 2017), was used to evaluate k-mer completeness and assembly quality for both haplotypes using the k-mer database ( k = 31) computed prior to genome assembly. The analysis outputs included assembly QV scores and completeness statistics. The genome was analysed using the BlobToolKit pipeline, a Nextflow ( Di Tommaso et al., 2017) implementation of the earlier Snakemake version ( Challis et al., 2020). The pipeline aligns PacBio reads using minimap2 ( Li, 2018) and SAMtools ( Danecek et al., 2021) to generate coverage tracks. It runs BUSCO ( Manni et al., 2021) using lineages identified from the NCBI Taxonomy ( Schoch et al., 2020). For the three domain-level lineages, BUSCO genes are aligned to the UniProt Reference Proteomes database ( Bateman et al., 2023) using DIAMOND blastp ( Buchfink et al., 2021). The genome is divided into chunks based on the density of BUSCO genes from the closest taxonomic lineage, and each chunk is aligned to the UniProt Reference Proteomes database with DIAMOND blastx. Sequences without hits are chunked using seqtk and aligned to the NT database with blastn ( Altschul et al., 1990). The BlobToolKit suite consolidates all outputs into a blobdir for visualisation. The BlobToolKit pipeline was developed using nf-core tooling ( Ewels et al., 2020) and MultiQC ( Ewels et al., 2016), with containerisation through Docker ( Merkel, 2014) and Singularity ( Kurtzer et al., 2017). We used lep_busco_painter to paint Merian elements along chromosomes ( Wright et al., 2024). Merian elements represent the 32 ancestral linkage groups in Lepidoptera. The painting process utilised BUSCO gene locations from the lepidoptera_odb10 set ( Kriventseva et al., 2019) and chromosome lengths from NCBI Datasets. Each complete BUSCO gene (both single-copy and duplicated) was assigned to a Merian element based on a reference database, then plotted along chromosomes drawn to scale. Genome sequence report Sequence data PacBio sequencing of the Rheumaptera hastata specimen generated 20.56 Gb (gigabases) from 2.03 million reads, which were used to assemble the genome. GenomeScope2.0 analysis estimated the haploid genome size at 576.64 Mb, with a heterozygosity of 1.43% and repeat content of 37.18% ( Figure 2). These estimates guided expectations for the assembly. Based on the estimated genome size, the sequencing data provided approximately 34× coverage. Hi-C sequencing produced 95.72 Gb from 633.94 million reads, which were used to scaffold the assembly. RNA sequencing data were also generated and are available in public sequence repositories. Table 1 summarises the specimen and sequencing details. Frequency distribution of k-mers generated using GenomeScope2. The plot shows observed and modelled k-mer spectra, providing estimates of genome size, heterozygosity, and repeat content based on unassembled sequencing reads. Assembly statistics The genome was assembled into two haplotypes using Hi-C phasing. Haplotype 1 was curated to chromosome level, while haplotype 2 was assembled to scaffold level. The final assembly has a total length of 589.77 Mb in 58 scaffolds, with 142 gaps, and a scaffold N50 of 20.9 Mb ( Table 2). Table 2. Genome assembly statistics for Rheumaptera hastata. Genome assemblyHaplotype 1 Haplotype 2 Assembly name ilRheHast1.hap1.1ilRheHast1.hap2.1 Assembly accession GCA_964273775.1GCA_964273725.1 Assembly level chromosomescaffold Span (Mb) 589.77588.77 Number of chromosomes 31- Number of contigs 200196 Contig N50 6.74 Mb7.12 Mb Number of scaffolds 5868 Scaffold N50 20.9 Mb21.01 Mb Longest scaffold length (Mb) 32.0732.25 Sex chromosomes Z- Organelles Mitochondrial genome: 15.57 kb- Genome assembly statistics for Rheumaptera hastata. Most of the assembly sequence (99.85%) was assigned to 31 chromosomal-level scaffolds, representing 30 autosomes and the Z sex chromosome. These chromosome-level scaffolds, confirmed by Hi-C data, are named according to size ( Figure 3; Table 3). Chromosome painting with Merian elements illustrates the distribution of orthologues along chromosomes and highlights patterns of chromosomal evolution relative to Lepidopteran ancestral linkage groups ( Figure 4). The Z chromosome was identified through synteny analysis with Rheumaptera undulata (GCA_964235345.1). During curation we note that contigs in the following regions have uncertain order and orientation: chromosome 28 (4.8–5.5 Mbp) and chromosome 25 (12.1–12.7 Mbp). The mitochondrial genome was also assembled (length 15.57 kb, OZ187343.1). This sequence is included as a contig in the multifasta file of the genome submission and as a standalone record. Hi-C contact map of the Rheumaptera hastata genome assembly. Assembled chromosomes are shown in order of size and labelled along the axes, with a megabase scale shown below. The plot was generated using PretextSnapshot. Table 3. Chromosomal pseudomolecules in the haplotype 1 genome assembly of Rheumaptera hastata ilRheHast1.INSDC accessionMoleculeLength (Mb)GC% Assigned Merian elementsOZ187313.1124.9037.50M2OZ187314.1223.8137.50M1OZ187315.1323.6937.50M17;M20OZ187316.1422.7137.50M3OZ187317.1522.7037.50M8OZ187318.1622.1637M9OZ187319.1722.1037.50M7OZ187320.1822.0837M12OZ187321.1921.9937M5OZ187322.11021.3937M16OZ187323.11121.1237M6OZ187324.11220.9037.50M23OZ187325.11320.7337M18OZ187326.11420.5637.50M21OZ187327.11520.2037.50M4OZ187328.11619.8637.50M22OZ187329.11719.3037.50M10OZ187330.11819.2037.50M15OZ187331.11918.7737.50M11OZ187332.12018.1938M14OZ187333.12117.9737.50M13OZ187334.12215.2037.50M24OZ187335.12315.1138M19OZ187336.12414.3637.50M26OZ187337.12513.7337.50M28OZ187338.12612.3137.50M27OZ187339.12711.6039M31OZ187340.12810.1441M30OZ187341.12910.1038.50M29OZ187342.1309.9638.50M25OZ187312.1Z32.0737.50MZ Chromosomal pseudomolecules in the haplotype 1 genome assembly of Rheumaptera hastata ilRheHast1. Merian elements painted across chromosomes in the ilRheHast1.hap1.1 assembly of Rheumaptera hastata. Chromosomes are drawn to scale, with the positions of orthologues shown as coloured bars. Each orthologue is coloured by the Merian element that it belongs to. All orthologues which could be assigned to Merian elements are shown. Assembly quality metrics For haplotype 1, the estimated QV is 66.5, and for haplotype 2, 67.7. When the two haplotypes are combined, the assembly achieves an estimated QV of 67.1. The k-mer completeness is 73.43% for haplotype 1, 73.36% for haplotype 2, and 99.50% for the combined haplotypes ( Figure 5). Evaluation of k-mer completeness using MerquryFK. This plot illustrates the recovery of k-mers from the original read data in the final assemblies. The horizontal axis represents k-mer multiplicity, and the vertical axis shows the number of k-mers. The black curve represents k-mers that appear in the reads but are not assembled. The green curve (the homozygous peak) corresponds to k-mers shared by both haplotypes and the red and blue curves (the heterozygous peaks) show k-mers found only in one of the haplotypes. BUSCO analysis using the lepidoptera_odb10 reference set ( n = 5 286) identified 98.5% of the expected gene set (single = 97.9%, duplicated = 0.7%) in haplotype 1. For haplotype 2, BUSCO analysis identified 98.3% of the expected gene set (single = 97.7%, duplicated = 0.6%). The snail plot in Figure 6 summarises the scaffold length distribution and other assembly statistics for haplotype 1. The blob plot in Figure 7 shows the distribution of scaffolds by GC proportion and coverage for haplotype 1. Assembly metrics for ilRheHast1.hap1.1. The BlobToolKit snail plot provides an overview of assembly metrics and BUSCO gene completeness. The circumference represents the length of the whole genome sequence, and the main plot is divided into 1,000 bins around the circumference. The outermost blue tracks display the distribution of GC, AT, and N percentages across the bins. Scaffolds are arranged clockwise from longest to shortest and are depicted in dark grey. The longest scaffold is indicated by the red arc, and the deeper orange and pale orange arcs represent the N50 and N90 lengths. A light grey spiral at the centre shows the cumulative scaffold count on a logarithmic scale. A summary of complete, fragmented, duplicated, and missing BUSCO genes in the set is presented at the top right. An interactive version of this figure can be accessed on the BlobToolKit viewer. BlobToolKit GC-coverage plot for ilRheHast1.hap1.1. Blob plot showing sequence coverage (vertical axis) and GC content (horizontal axis). The circles represent scaffolds, with the size proportional to scaffold length and the colour representing phylum membership. The histograms along the axes display the total length of sequences distributed across different levels of coverage and GC content. An interactive version of this figure is available on the BlobToolKit viewer. Table 4 lists the assembly metric benchmarks adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards September 2024. The EBP metric, calculated for the haplotype 1, is 6.C.Q66, meeting the recommended reference standard. Table 4. Earth Biogenome Project summary metrics for the Rheumaptera hastata assembly. MeasureValue BenchmarkEBP summary (haplotype 1)6.C.Q666.C.Q40Contig N50 length6.74 Mb≥ 1 MbScaffold N50 length20.90 Mb= chromosome N50Consensus quality (QV)Haplotype 1: 66.5; haplotype 2: 67.7; combined: 67.1≥ 40 k-mer completenessHaplotype 1: 73.43%; Haplotype 2: 73.36%; combined: 99.50%≥ 95%BUSCOHaplotype 1: C:98.5% [S:97.9%, D:0.7%], F:0.3%, M:1.2%, n:5 286; Haplotype 2: C:98.3% [S:97.7%, D:0.6%], F:0.4%, M:1.3%, n:5 286S > 90%; D < 5%Percentage of assembly assigned to chromosomes99.86%≥ 90% Earth Biogenome Project summary metrics for the Rheumaptera hastata assembly. Table 5. Software versions and sources used for Rheumaptera hastata. SoftwareVersionSourceBLAST2.14.0 ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ BlobToolKit4.3.9 https://github.com/blobtoolkit/blobtoolkit BUSCO5.5.0 https://gitlab.com/ezlab/busco bwa-mem22.2.1 https://github.com/bwa-mem2/bwa-mem2 DIAMOND2.1.8 https://github.com/bbuchfink/diamond fasta_windows0.2.4 https://github.com/tolkit/fasta_windows FastK1.1 https://github.com/thegenemyers/FASTK GenomeScope2.02.0.1 https://github.com/tbenavi1/genomescope2.0 Gfastats1.3.6 https://github.com/vgl-hub/gfastats Hifiasm0.19.8-r603 https://github.com/chhylp123/hifiasm HiGlass1.13.4 https://github.com/higlass/higlass merian-busco-painterv1.0.0 https://github.com/Karenvn/merian-busco-painter MerquryFK1.1.0-c1 https://github.com/thegenemyers/MERQURY.FK Minimap22.24-r1122 https://github.com/lh3/minimap2 MitoHiFi3 https://github.com/marcelauliano/MitoHiFi MultiQC1.14; 1.17 and 1.18 https://github.com/MultiQC/MultiQC Nextflow23.10.0 https://github.com/nextflow-io/nextflow PretextSnapshot0.0.5 https://github.com/sanger-tol/PretextSnapshot PretextView1.0.3 https://github.com/sanger-tol/PretextView samtools1.19.2 https://github.com/samtools/samtools sanger-tol/ascc0.1.0 https://github.com/sanger-tol/ascc sanger-tol/blobtoolkit0.6.0 https://github.com/sanger-tol/blobtoolkit sanger-tol/curationpretext1.4.2 https://github.com/sanger-tol/curationpretext Seqtk1.3 https://github.com/lh3/seqtk Singularity3.9.0 https://github.com/sylabs/singularity TreeVal1.4.0 https://github.com/sanger-tol/treeval YaHS1.2a.2 https://github.com/c-zhou/yahs Software versions and sources used for Rheumaptera hastata. Wellcome Sanger Institute – Legal and Governance The materials that have contributed to this genome note have been supplied by a Tree of Life collaborator. The Wellcome Sanger Institute employs a process whereby due diligence is carried out proportionate to the nature of the materials themselves, and the circumstances under which they have been/are to be collected and provided for use. The purpose of this is to address and mitigate any potential legal and/or ethical implications of receipt and use of the materials as part of the research project, and to ensure that in doing so, we align with best practice wherever possible. The overarching areas of consideration are: •Ethical review of provenance and sourcing of the material•Legality of collection, transfer and use (national and international) •Ethical review of provenance and sourcing of the material Ethical review of provenance and sourcing of the material •Legality of collection, transfer and use (national and international) Legality of collection, transfer and use (national and international) Each transfer of samples is undertaken according to a Research Collaboration Agreement or Material Transfer Agreement entered into by the Tree of Life collaborator, Genome Research Limited (operating as the Wellcome Sanger Institute), and in some circumstances, other Tree of Life collaborators. The authors present a very high-quality, chromosome-level genome assembly for Rheumaptera hastata using PacBio HiFi, Hi-C, and RNA-seq data. The assembly quality metrics (QV 66.5, 98.5% BUSCO completeness, and 31 pseudomolecules) are impressive and meet Earth BioGenome Project standards. Minor comments and questions: The authors mention that contig order and orientation remain uncertain on Chromosome 28 (4.8–5.5 Mbp) and Chromosome 25 (12.1–12.7 Mbp). Could you briefly comment on what might be causing this—for example, high repeat density, rDNA clusters, or local drops in Hi-C coverage?The decontamination workflow using ASCC and BlobToolKit is clear, but many geometrid moths harbor bacterial endosymbionts like Wolbachia and Spiroplasma. Could you explicitly state whether any cobiont or endosymbiont sequences were detected and filtered out during screening, or if the sample was entirely free of non-eukaryotic reads?GenomeScope2 estimates repeat content at ~37.2%. While full gene annotation will be delivered by Ensembl, a short summary sentence on the dominant repeat classes (or confirmation that repeat-masked FASTA files are available) would be very useful for researchers planning comparative or population genomic work. The authors mention that contig order and orientation remain uncertain on Chromosome 28 (4.8–5.5 Mbp) and Chromosome 25 (12.1–12.7 Mbp). Could you briefly comment on what might be causing this—for example, high repeat density, rDNA clusters, or local drops in Hi-C coverage? The authors mention that contig order and orientation remain uncertain on Chromosome 28 (4.8–5.5 Mbp) and Chromosome 25 (12.1–12.7 Mbp). Could you briefly comment on what might be causing this—for example, high repeat density, rDNA clusters, or local drops in Hi-C coverage? The decontamination workflow using ASCC and BlobToolKit is clear, but many geometrid moths harbor bacterial endosymbionts like Wolbachia and Spiroplasma. Could you explicitly state whether any cobiont or endosymbiont sequences were detected and filtered out during screening, or if the sample was entirely free of non-eukaryotic reads? The decontamination workflow using ASCC and BlobToolKit is clear, but many geometrid moths harbor bacterial endosymbionts like Wolbachia and Spiroplasma. Could you explicitly state whether any cobiont or endosymbiont sequences were detected and filtered out during screening, or if the sample was entirely free of non-eukaryotic reads? GenomeScope2 estimates repeat content at ~37.2%. While full gene annotation will be delivered by Ensembl, a short summary sentence on the dominant repeat classes (or confirmation that repeat-masked FASTA files are available) would be very useful for researchers planning comparative or population genomic work. GenomeScope2 estimates repeat content at ~37.2%. While full gene annotation will be delivered by Ensembl, a short summary sentence on the dominant repeat classes (or confirmation that repeat-masked FASTA files are available) would be very useful for researchers planning comparative or population genomic work. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Population genetics applied to conservation. Special focus on cobionts such as Wolbachia and Spiroplasma in Lepidoptera. I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. Article assessment The Data Note by Dinca V., et al. reports two haplotype assemblies of a male Rheumaptera hastata generated using PacBio HiFi, Hi-C, and RNA-seq data. Haplotype 1 is a high-quality 589.77 Mb chromosome-level assembly comprising 31 pseudomolecules with a QV of 66.5 and 98.5% BUSCO completeness. The Data Note is well written; however, a few minor comments should be addressed before the indexing. Detailed comments: 1. Figure 1: The author should provide the size of the specimen or include a scale bar in the figure. 2. Table 1 lists “whole organism” as the tissue source for the PacBio, Hi-C, and RNA-seq datasets. However, the methods do not explain how the specimen was dissected among three different extraction processes. The authors should clarify whether all libraries were prepared from tissue aliquots obtained from the same individual or whether 3 individuals were used. For example, the nucleic acid extraction section indicates that 30 mg was used; however, in the Hi-C extraction section, it is indicated that 20-50 mg of tissue was used to prepare the Hi-C library. 3. Haplotype 2 is indicated only through summary statistics. The authors should clarify whether haplotype 2 was scaffolded with the same Hi-C data and explain why it remains classified as scaffolded-level despite having an N50 comparable to that of haplotype 1. 4. Table 2 and the main text report 58 scaffolds for haplotype 1; however, Figure 6 reports 59 scaffolds. Is the mitochondrial contig included? This should be clarified in the figure legend. 5. Explain why 3 different MultiQC versions were used in the analyses. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Whole genome sequencing, Whole transcriptome analysis, Shotgun metagenomics, Metabarcoding, Marine genomics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. This manuscript presents a chromosome-level, haplotype-resolved genome assembly of the geometrid moth Rheumaptera hastata. In general its already in good shape to be indexed. I just have few very minor comments: 1. Species in Geometridae is difficult to identify. As a high quality reference genome, it would be nice if author can provide morphological voucher images for the taxonomic important character. This data will be very valuable for further intra-specific variation/population genomic studies. 2. it is not very clear for me if DNA and RNA were extracted from same individuals? 3. it would be nice if author can also provide information on haplotype 2, e.g. assembly parameters, Hi-C map, quality assessment. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: genomics, evolution, invertbrates, zoology I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.