A circular economy framework to mitigate water scarcity and river pollution in Delhi, India Authors: Radhey Shyam Tyagi, S K Singh, P K Goyal Published: 2026 ABSTRACT AbstractDelhi faces a drinking water deficit of nearly 2000 Million Liters per Day (MLD) driven by rapid population growth, climate variability, and dependence on interstate sources. This study proposes a phased, circular economy–based roadmap to achieve water self-reliance by 2045. Using official datasets, field inspections, consultations, and scenario modelling, both conventional and non-conventional resources are quantified. Current filtered water supply from surface and groundwater is 4540 MLD against demand of 6540 MLD. Under projected population of 54.4 million by 2045, demand could rise to 14,797 MLD at the DJB norm or 10,880 MLD at the CPHEEO norm. Integrated measures such as wastewater reuse, NRW reduction, rainwater harvesting, groundwater recharge, and related interventions could raise total supply to about 14,928 MLD. Sensitivity analysis identifies population growth, NRW reduction, and reuse adoption as the most influential factors. Monte Carlo analysis shows a 90% confidence range from a deficit of 1200 MLD to a surplus of 2500 MLD. The results suggest that combined legal, technical, and behavioral measures can sharply reduce water stress and pollution, but full self-reliance will depend on strong implementation and favorable demographic trends.Supplementary InformationThe online version contains supplementary material available at https://doi.org/10.1038/s41598-026-56891-x.Keywords: Best water management practices, Circular economy, Groundwater recharge, Scenario analysis, Urban water resilience, Wastewater recyclingSubject terms: Environmental sciences, Environmental social sciences, Hydrology, Water resources Introduction Global water scarcity has emerged as one of the most critical sustainability challenges of the twenty-first century. Chaudhuri et al.1, Herrera2, projected that by 2025 nearly 40% of the world’s population, approximately 7.2 billion people, would face serious difficulties in accessing freshwater for human consumption. Groundwater already plays a vital role in meeting water demand, accounting for 10–20% of total water withdrawals in developing countries3. Future projections are even more concerning: by 2050, an estimated 3.1 billion urban residents are expected to experience seasonal water shortages, with nearly 1 billion people facing chronic or perpetual water scarcity, significantly constraining urban growth and sustainable water supply systems4–6. In many cities worldwide, groundwater constitutes the backbone of urban drinking water supply. For instance, Berlin relies almost entirely on groundwater to meet its potable water demand7 Click or tap here to enter text. However, rapid urbanization, climate change, inadequate groundwater recharge, pollution, and inefficient water governance have placed unprecedented stress on urban aquifers. Satellite-based studies have revealed substantial groundwater depletion across Asia’s major cities, where population pressure, climate variability, and aging infrastructure intersect to exacerbate water insecurity8,9. Climate change further intensifies these pressures by altering precipitation regimes, increasing drought frequency, and reducing glacier-fed river flows that traditionally support urban water systems10,11. Cities across the globe have responded to water scarcity with markedly different resilience pathways. Singapore, facing severe natural freshwater constraints, has emerged as a global benchmark by integrating NEWater, recycling more than 40% of its wastewater, alongside desalination and demand management to approach water self-sufficiency12,13. Barcelona, following the 2008 drought, permanently incorporated desalination, wastewater reuse, and aggressive demand-side management into its urban water portfolio14. In contrast, Mexico City exemplifies the risks of a linear water management paradigm, where heavy reliance on groundwater abstraction has resulted in widespread land subsidence and aquifer depletion, threatening long-term urban resilience15,16. Similarly, Cape Town’s 2015–2018 drought, which nearly culminated in the unprecedented “Day Zero” shutdown of municipal water supply, underscored the vulnerability of cities dependent on limited surface storage, prompting a rapid transition toward demand reduction, aquifer recharge, reuse, and diversification of supply sources17,18. A comparative synthesis of these global experiences is presented in Table 1, which highlights contrasting urban water resilience pathways, intervention strategies, trade-offs, and circular economy measures across Delhi, Singapore, Beijing, and Cape Town. Table 1Global comparative scenario analysis of Urban Water Resilience Pathways.CityBaseline supply vs. demandIntervention pathwayKey trade-offsCircular economy measuresDelhiSupply ~ 4540 MLD vs. demand ~ 6540 MLD → deficit ~ 2000 MLD (2023)By 2045, interventions (wastewater reuse, NRW reduction, rainwater harvesting, groundwater recharge, mine-pit storage, legal entitlements) could mobilize 14,928 MLD against demand of 9845 MLD → surplus ~ 4668 MLDHigh upfront costs for tertiary treatment, NRW reduction, and institutional reforms; political hurdles in interstate agreements; equity concerns in access to decentralized reuseSewage sludge → biogas; treated wastewater → non-potable reuse; rainwater harvesting → aquifer rechargeSingaporeDomestic water demand ~ 2100 MLD, with < 2% local surface water available (baseline heavily import-dependent)NEWater (40% reuse) + desalination (30%) + imports (30%). By 2060, plan for 85% self-reliance from reuse + desalination.High energy costs for desalination; long-term sustainability linked to energy transitionWastewater → NEWater (potable reuse); desalination powered by renewables in long termBeijingPer capita water availability < 150 m³/year, deficit persists despite diversion from South–North Water Transfer ProjectExpanded desalination (coastal areas), wastewater reuse (20–25%), strict demand controls, groundwater regulation.Social costs of rationing; ecological trade-offs of diversion projects; water-energy nexus stressWastewater → industrial reuse; sludge → fertilizer and biogasCape TownPre-2018 “Day Zero” crisis: dam storage < 20%, demand > 1000 MLDPost-crisis: aggressive demand reduction (per capita use cut to ~ 50–70 LPCD), aquifer recharge, small-scale desalination, reuse pilots.Economic cost to tourism/agriculture; socioracial equity issues as restrictions hit informal settlements harderStormwater harvesting → recharge; wastewater reuse for irrigation; sludge-to-energy pilotsBarcelonaDrought driven scarcityDesalination, reuse, and demand side managementEnergy cost and climate exposureReuse and reduced demand Global comparative scenario analysis of Urban Water Resilience Pathways. The novelty of this study lies in proposing a comprehensive circular-economy-based urban water resilience framework for Delhi that simultaneously addresses water scarcity and pollution. Unlike prior studies, this research integrates legal, technical, institutional, and behavioral dimensions into a phased roadmap extending to 2045, quantitatively estimating contributions from wastewater reuse, non-revenue water reduction, rainwater harvesting, groundwater recharge, and non-conventional sources, while benchmarking Delhi’s pathway against global cities. The primary objective of this study is to evaluate and propose a comprehensive framework for making Delhi a self-resilient city in terms of drinking water availability by the year 2045. Specifically, the study aims to: Assess current water supply–demand balance and quantify the existing deficit; Evaluate existing water infrastructure and identify inefficiencies in surface, groundwater, and recycled water use; Quantify the potential of non-conventional sources (rainwater harvesting, wastewater reuse, desalination, recharge); Propose legal, institutional, and technological measures for sustainable water augmentation; Model future water demand under climate change and population growth scenarios; Recommend best water management practices (BWMP) for demand-side conservation, and Integrate technical, governance, and behavioral strategies into a phased water resilience roadmap. Methodology Figure 1 outlines the stepwise approach adopted in this study, beginning with data collection, followed by stakeholder consultations, demand–supply gap analysis, scenario-based modeling, conservation potential estimation, legal and institutional review, community behavior assessment, and finally synthesis into an integrated strategic framework. A demand–supply gap analysis was then performed using population norms and existing resource availability, which formed the basis for scenario-based modelling of non-conventional water sources. The methodology further incorporates conservation potential estimation through reduction of non-revenue water and efficiency measures, a legal and institutional review of agreements and governance challenges, and a community behaviour assessment to capture social acceptance and willingness to adopt reuse and conservation practices. Finally, all findings were synthesized into an integrated strategic framework that combines technical, legal, and behavioral interventions to achieve long-term water self-reliance for Delhi. Flow chart adopted for methodology. Data collection, filed inspection, observations, and stakeholders’ consultations Quantitative and qualitative data were obtained from official sources including the Delhi Jal Board (DJB), Central Ground Water Board (CGWB), Central Water Commission (CWC), and published reports from the Ministry of Jal Shakti followed by physical inspection of all the ten water treatment plants and allied infrastructure of different capacities, running from different water sources. Abandoned water bodies and mines within NCT-Delhi boundaries having potential for rainwater storage were also visited. These datasets provided estimates of existing surface and groundwater allocations, treatment plant capacities and utilization, recycled water volumes and losses during treatment, and historical and projected population growth and per capita water demand. Semi-structured interviews were conducted with 12 DJB engineers, 8 water treatment plant operators, and 25 residents using community-level water sources. These interactions yielded insights into operational bottlenecks, policy limitations, and public satisfaction. Water demand–supply gap analysis The water demand-supply gap analysis was conducted for both current year 2025 and future horizon year 2045 scenarios using a standardized water balance model. The core of this model is defined by the formula: For the present analysis, annual urban water demand in year t is defined as: where is water demand in MLD, is population in year t, and q is the adopted per capita water service norm in litres per capita per day. Urban service supply in year t is estimated as: where is conventional treated surface-water supply, is groundwater supply, is currently usable recycled water, and represents the incremental contribution of each non-conventional or management intervention in year t. Water Demand (D) was calculated as the product of the projected population and the per capita water allocation norm. Per capita norms were benchmarked against multiple standards: DJB (272 LPCD), CPHEEO (135–200 LPCD for urban domestic use), and BIS (135 LPCD). For this study, the CPHEEO norm of 200 LPCD (i/c acceptable NRW and fire demand etc.) was adopted as a conservative, nationally recognized standard, with DJB’s 272 LPCD used for sensitivity comparison. The projected population in 2045 with annual growth rate of 2.53%, worked out to be 54.4 million (P2045 = P2025 × (1 + r)^20 = 33 × (1.0253)^20 = 54.4 million). Current filtered water supply from conventional sources surface and ground water is approximately 4540 MLD (Delhi Jal Board19,20 resulting in a current deficit of approximately 2000 MLD. If entire available recycled water of 1510 MLD (Sewage being treated 2724 MLD – Haryana share at downstream of Delhi i.e. 1214 = 1510 MLD) is completely utilizable and used for non-potable purposes, this gap will be hardly 490 MLD. This gap analysis enabled estimation of water deficits and served as the basis for modeling future interventions. In the year 2045, the water demand has been estimated as 10,880 MLD for the population of 54.4. million population @ 200 LPCD. Scenario-based modeling for future water availability To systematically evaluate Delhi’s future water security under varying policy and implementation scenarios, a scenario-based modeling approach was adopted. This methodology enabled the projection of water availability up to the year 2045 by quantifying contributions from both conventional and non-conventional sources under different levels of intervention intensity and implementation success. Three distinct scenarios were developed to capture a range of plausible futures: Business-as-Usual (BAU) Scenario Assumes continuation of current trends with minimal adoption of new policies, limited investment in non-conventional sources, and slow progress in demand management. Non-Revenue Water (NRW) remains high, and large-scale reuse and recharge projects see limited implementation. Progressive Implementation (PI) Scenario Represents a moderate, realistically optimistic pathway. Assumes concerted government efforts, partial success in legal and institutional reforms, and gradual public acceptance of reuse and conservation measures. Key infrastructure projects are completed but often with delays. Circular and Resilient (CR) Scenario An ambitious, transformative pathway embodying the full adoption of circular economy principles. Assumes aggressive policy implementation, optimal utilization of all non-conventional sources, high public participation, and successful execution of all legal and technical interventions. The core of the modeling involved the quantification of water contributions from each potential source under the three scenarios. The model structure is based on the water balance equation already given above in “Water demand–supply gap analysis”: Non-conventional source quantification from first principles Contributions from non-conventional sources were estimated based on technical potential, literature benchmarks, and feasibility studies of Wastewater Reuse: Based on treatment capacity and potential for non-potable applications; Rainwater Harvesting: Estimated from rooftop and surface catchment potential; Groundwater Recharge: Quantified via potential from managed aquifer recharge structures and reclaimed water; Brackish Water Desalination: Based on identified volumes of brackish groundwater and technical recovery potential; and NRW Reduction: Calculated as the volume of water saved by reducing losses from current levels to defined targets. This scenario-based modeling provided a robust foundation for identifying the most effective and feasible combination of interventions to achieve water resilience for Delhi by 2045. Each non-conventional source was derived using standard engineering formulas: Wastewater reuse potential Where: Sewage Generation = 80–85% of water supply (CPHEEO, 2016); Current water supply = 6050 MLD. Therefore, sewage generated = 6050 × 0.82 = 4961 MLD. Sewage Generation = 80–85% of water supply (CPHEEO, 2016); Current water supply = 6050 MLD. Therefore, sewage generated = 6050 × 0.82 = 4961 MLD. Collection efficiency = 0.95 (DJB internal estimates), Existing treatment capacity = 2724 MLD (secondary treatment), Proposed tertiary treatment capacity = 4540 MLD (DJB master plan target), and Reuse fraction for non-potable applications = 0.95 (after losses). Collection efficiency = 0.95 (DJB internal estimates), Existing treatment capacity = 2724 MLD (secondary treatment), Proposed tertiary treatment capacity = 4540 MLD (DJB master plan target), and Reuse fraction for non-potable applications = 0.95 (after losses). Result 4,961 × 0.95 × 0.95 = 4,476 MLD (rounded to 4540 MLD with planned capacity expansion by DJB, as per their21. Rainwater harvesting potential where A is effective catchment area in m², is annual rainfall in mm, C is runoff coefficient, and is collection efficiency. Where: Total rooftop area in Delhi = 150 km² (DJB assessment), Additional paved area = 200 km², Average annual rainfall = 611 mm (IMD, 2020), Runoff coefficient (rooftop) = 0.85; (paved) = 0.70, and Collection efficiency = 0.90. Hence, Total RWH potential = 402 MLD (rounded to 410 MLD). NRW Reduction Potential where is system input volume, is baseline non-revenue water, and is the target NRW fraction in year t. This formulation is aligned with standard utility accounting logic in which NRW is defined as the difference between system input volume and billed authorized consumption. Where: Current supply = 4540 MLD, base NRW = 50% (DJB estimate), and Target NRW (CR scenario) = 15%. Result 4540 × (0.50 − 0.15) = 1590 MLD (rounded to 1590 MLD). Assuming 6050 MLD water supply i/c recycled water, the NRW reduction will be 2117 MLD (Round of ~ 2120 MLD). Groundwater recharge potential Based on CGWB assessments, the Ganga-Yamuna basin interface offers 420 MLD of sustainable extraction potential subject to bilateral agreement with Uttar Pradesh. Additional potential from Najafgarh drain area is estimated at 45 MLD22. Brackish water desalination potential Based on identified brackish groundwater in the Najafgarh zone, technical recovery potential is estimated at 160 MLD20. Water-efficient fixtures savings Where: Population (2045) = 54.4 million, Adoption rate (CR scenario) = 100% of new buildings + retrofit program, and Per capita savings potential = 10 LPCD (based on12,13. To be on conservative saving 75% of 10 LPCD. Population (2045) = 54.4 million, Adoption rate (CR scenario) = 100% of new buildings + retrofit program, and Per capita savings potential = 10 LPCD (based on12,13. To be on conservative saving 75% of 10 LPCD. Result Model validation The water balance model was validated by back-casting to the year 2010. Using 2010 population data (16.75 million), historical supply estimates (4,200 MLD), and the CPHEEO norm (200 LPCD), the model predicted demand of 3,350 MLD. Actual reported deficit for 2010–2011 was 300–400 MLD23 with actual demand estimated at 3,500-3,800 MLD, providing acceptable model performance (error < 10%). Estimation of pollutant loads from untreated/partially treated wastewater To quantify the environmental impact of the current linear water management system, the pollutant loads entering the Yamuna River from untreated and partially treated wastewater were estimated. This analysis focused on key parameters indicative of organic pollution: Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD). The estimation was based on the differential between the total sewage generated and the volume that undergoes treatment meeting prescribed standards. The core calculation for each pollutant load (PPollutant) was derived using the formula: where UUntreated represents the volume of wastewater receiving no treatment, SSubstandard is the volume receiving only primary or inadequate secondary treatment, and PPollutant is the characteristic concentration of the pollutant (e.g., BOD = 250 mg/L, COD = 500 mg/L) in raw or inadequately treated sewage, based on standard values and Delhi-specific studies24. This methodology provided a critical baseline of the pollution burden, against which the remediation benefits of increased wastewater recycling and reuse could be measured. Multi-criteria decision analysis (MCDA) for intervention prioritization To enable a holistic evaluation and ranking of the various water augmentation and management interventions, a Multi-Criteria Decision Analysis (MCDA) was conducted using the Analytic Hierarchy Process (AHP). Criteria Selection and Weighting: Criteria weights were elicited using AHP with a panel of 12 experts: 4 from DJB, 4 from academic institutions, 2 from CGWB, and 2 from environmental NGOs(Non-Government Organizations). Pairwise comparison matrices were completed by each expert, and consistency ratios were calculated (all CR < 0.10). The geometric mean of individual judgments produced the following weights: Five key criteria were selected to evaluate each intervention. Weights were assigned to each criterion based on their relative importance for long-term urban water resilience, determined through a combination of literature review and expert judgment. The criteria and their weights are: (1). Economic Viability (Weight: 25%): Implementation reality. (2) Water Augmentation Potential (Weight: 35%): The primary objective of study. (3) Pollution Reduction Co-Benefit (Weight: 20%): The intervention’s effectiveness in reducing pollutant loads (e.g., BOD) in the Yamuna River or groundwater. (4) Implementation Feasibility (Weight: 15%): Ease of implementation, considering technical readiness, institutional, political, and social constraints. (5) Co-Benefits & Circularity (Weight: 5%): Additional benefits such as energy recovery, groundwater recharge, or job creation. Scoring and Normalization: Each intervention was scored on a scale of 1 (Least Favorable) to 5 (Most Favorable) for each criterion. The scores were then normalized to a 0–1 scale using the linear max-min method. Aggregate Score Calculation: A final composite score for each intervention was calculated using the weighted sum method: The results of the MCDA, including the normalized scores and final rankings, are presented in Table 2. Table 2MCDA results for prioritizing water resilience interventions in DelhiInterventionEconomic viability 25%Water augmentation potential 35%Pollution reduction 20%Implementation feasibility 15%Co-benefits and circularity 5%Total scoreRankWastewater reuse and recycling0.700.951.000.650.900.8201Non-revenue water (NRW) reduction0.900.800.600.800.300.7402Rainwater harvesting and recharge0.850.500.700.900.800.7033Water-efficient fixtures0.950.300.300.950.200.5804Upper Yamuna Storage Dams0.400.900.200.300.400.5025Desalination of brackish water0.300.200.500.700.100.3556 MCDA results for prioritizing water resilience interventions in Delhi Uncertainty analysis using Monte Carlo simulation To quantify uncertainty in the 2045 water surplus projection, a Monte Carlo simulation was conducted with 10,000 iterations. Input parameters were assigned probability distributions based on literature review and expert consultation (n = 5 DJB engineers, 3 academic experts). The following distributions were used: Population Growth: Triangular (Min = 1.5%, Mode = 2.53%, Max = 3.5%). Final NRW %: Uniform (Min = 10%, Max = 30%) (Source: (Kumar and Goyal25)). Wastewater Reuse Adoption: Beta (α = 4, β = 1 (Mode = 80%)) BOD Removal Efficiency: Triangular (Min = 80%, Mode = 95%, Max = 98%): Treatment Plant data. Rainwater harvesting: Triangular (Min = 70%, Mode:100%, Max: 120%: Technical potential variation). Figure 2 below illustrates the results of a Monte Carlo simulation (10,000 iterations) modeling the projected water surplus for Delhi in 2045. The distribution accounts for uncertainties in key parameters, including population growth rate, Non-Revenue Water (NRW) reduction efficiency, wastewater reuse adoption rates, and the timely completion of upstream storage dams. The histogram shows the frequency of different surplus outcomes, while the overlaid solid line represents the smoothed probability density. The shaded area under the curve highlights the 90% confidence interval, meaning there is a 90% probability that the surplus will fall between 2200 MLD and 6100 MLD. The vertical dashed line indicates the mean (average) projected surplus of approximately 4400 MLD. The positively skewed (right-tailed) distribution indicates a higher probability of exceeding the mean surplus than falling significantly below it. This suggests that aggressive implementation of interventions (e.g., high reuse adoption, effective NRW control) can yield larger-than-expected benefits, providing a buffer against risks. However, the long-left tail underscores the real risk of a significantly smaller surplus if key interventions underperform. Similarly, the analysis for BOD load reduction showed a 90% confidence interval of 900 to 1200 tons per day. Sensitivity analysis tornado chart: key parameters for Delhi’s water resilience. Uncertainty analysis was conducted to test the robustness of aggregate system outcomes under the Circular and Resilient pathway, rather than to probabilistically evaluate individual interventions. The total water surplus in 2045 was calculated using a reduced-form system balance: where represents baseline supply and all intervention-derived water contributions, and demand , with Pdenoting population and the per-capita demand norm. Pollution load reduction from wastewater reuse was estimated as , where Cis representative pollutant concentration and is treatment efficiency. Uncertainty was introduced only for system-dominant drivers: population growth, final non-revenue water level, wastewater reuse adoption, and treatment efficiency. Other intervention volumes were treated as deterministic scenario assumptions. Moderate correlation was assumed between governance-linked variables (NRW reduction and reuse adoption), while population growth was treated as independent. Monte Carlo simulation was applied to propagate uncertainty through the system-level model and generate confidence bounds on total water surplus and pollution reduction. The use of 10,000 iterations ensured numerical convergence of output distributions; additional iterations did not materially alter results. This approach provides statistically stable confidence intervals for strategic outcomes without implying probabilistic testing of individual interventions. Results Baseline scenario: current water deficit and pollution footprint The baseline analysis for the year 2025 quantifies the severity of Delhi’s dual crisis of water scarcity and environmental pollution. Against a daily demand of 6,540 MLD (based on 33 million population × 200 LPCD CPHEEO norm), the current usable supply from all conventional sources amounts to only 4540 MLD, resulting in a significant water deficit of approximately 2000 MLD. This water deficit is compounded by a substantial pollution footprint. With approximately 3632 MLD (80% of water supplied i.e. 4540 MLD) of sewage generated and only 2724 MLD receiving treatment (of varying efficacy), a large volume of untreated or partially treated wastewater is discharged into the Yamuna River26,27. Based on our pollutant load estimation, this results in an estimated daily organic pollutant load of approximately 1600 tons of Biochemical Oxygen Demand (BOD) and approximately 3200 tons of Chemical Oxygen Demand (COD). This massive influx of pollutants is the primary cause of the severely degraded water quality in the Yamuna, transforming it into an ecologically dysfunctional water body for its stretch through Delhi24,26,27. Projected population and water demand for 2045 Using population projections (54.4 million at 2.53% annual growth from a 2025 base of 33 million worked out as ), projected water demand at 200 LPCD (CPHEEO norm) is 10,880 MLD. At 272 LPCD (DJB norm), demand reaches 14,797 MLD. All subsequent analyses use the CPHEEO norm (200 LPCD) as the nationally recognized standard, with DJB norm presented for sensitivity. Projected water availability and intervention contributions The implementation of the proposed Circular & Resilient framework reveals a transformative potential for Delhi’s water future by 2045. The model projects that the total potential water availability can be increased to 14,928 MLD under the CR scenario. This comprises the current base supply (6,050 MLD) plus additional contributions from non-conventional sources as shown in Tables 3 and 4 (under different scenario). Table 3Intervention quantification logic and scenario allocation.InterventionQuantification logic / sourceBAU (MLD)PI (MLD)CR (MLD)Upper Yamuna damsBased on allocated share (1,820 MLD) from CWC500 (delayed)1360 (partial)1820 (full)Wastewater reuseBased on treatment capacity and reuse potential (4,540 MLD)1510 (current use)30004540NRW reductionCalculation: (Current NRW% - Target NRW%) × Current Supply600 (to 40%)1200 (to 30%)2120 (to 15%)Rainwater harvestingPotential from rooftop & surface catchments (study-specific calc.)100250410Water-efficient fixturesSavings based on adoption rate and per-capita savings potential50200410Groundwater (Ganga Basin)Based on hydrological studies (420 MLD)0210420Desalination (Brackish)Based on identified potential in Najafgarh zone (160 MLD)080160Additional Ravi-Beas WaterLegal entitlement (1,135 MLD)05001135Industrial conservationRegulatory potential (123 MLD)2575123Groundwater (Najafgarh)Local assessment (45 MLD)102545Recharge via Abandoned MinesFeasibility studies (135 MLD)050135 Intervention quantification logic and scenario allocation. Table 4Total water availability under alternative scenarios (2045).ScenarioCurrent supply (MLD) i/c recycled waterAdditional from interventions (MLD)Total supply (MLD)Demand @200 LPCD (MLD)Net balance (MLD)BAU60502285833510,880– 2545 (deficit)PI6050695013,00010,880+ 2120 (surplus)CR6050887814,92810,880+ 4048 (surplus)Note: The CR intervention contribution sum (8878 MLD) is a conservative estimate that excludes overlaps and double counting between interventions. Total water availability under alternative scenarios (2045). Note: The CR intervention contribution sum (8878 MLD) is a conservative estimate that excludes overlaps and double counting between interventions. Phased quantification of water from non-conventional sources A cornerstone of this study is the detailed, timeline-based quantification of potential water contributions from non-conventional sources. This phased approach moves beyond theoretical potential to provide a practical, actionable roadmap for Delhi’s water augmentation. The quantification is based on technical feasibility, project implementation timelines, and regulatory or behavioral adoption rates. Interventions were categorized into short-term (0–5 years), medium-term (5–10 years), and long-term (10–20 years) phases based on: (a) technical readiness and capital deployment periods, (b) jurisdictional and regulatory hurdles, (c) historical project execution data in India, and (d) stakeholder inputs from Delhi Jal Board and water utility officials. Figure 3; Table 5 below explain the expected progressive water availability from conventional and non-conventional sources by the year 2045. Expected progressive water availability for Delhi by the year 2045. Table 5Phased quantification of non-conventional water sources for Delhi.InterventionPotential (MLD)Implementation timelineRationale for phasingNRW reduction1590Short-term (0–5 yrs)Requires management will, leak detection, pipe replacement; high impact for quick gainsWater-efficient fixtures410Short-to-medium (0–10 yrs)Dependent on public awareness, incentives, and policy mandates; gradual adoptionIndustrial conservation123Short-term (0–5 yrs)Can be enforced through regulation and water auditingGroundwater (Najafgarh)45Short-term (0–5 yrs)Local project within Delhi’s territoryGroundwater (Ganga-Yamuna)420Medium-term (5–10 yrs)Requires bilateral agreement with Uttar PradeshBrackish water desalination160Medium-term (5–10 yrs)Requires time for plant construction and commissioningRooftop & Community RWH275Short-to-medium (0–10 yrs)Can be mandated and incentivized; widespread implementation takes timeRecharge via Abandoned Mines135Medium-term (5–10 yrs)Requires feasibility studies, design, and execution of larger-scale engineering projectsAdditional Ravi-Beas Water1,135Medium-term (5–10 yrs)Subject to political negotiation with Punjab/HaryanaAdditional Ganga Water2,270Long-term (10–20 yrs)Complex interstate dialogue within the Ganga Basin; requires long-term strategyUpper Yamuna Storage Dams1,820Long-term (10–20 yrs)National projects with long construction periods and interstate coordination Phased quantification of non-conventional water sources for Delhi. When this phased potential from non-conventional sources is added to the full utilization of recycled water (4540 MLD) and the current supply base, the total available water reaches 14,928 MLD under the CR scenario. Pollution load reduction potential Under the CR scenario, large-scale wastewater reuse (4540 MLD) would prevent approximately 1140 tons of BOD and 2270 tons of COD from entering the Yamuna River daily, representing a reduction of over 70% of the current organic pollutant load. This level of abatement is sufficient to shift the river from its current hyper-eutrophic state toward a condition that can support aquatic life and reduce public health risks24,27. MCDA results The Table 2 in “Multi-criteria decision analysis (MCDA) for intervention prioritization” depicts the MCDA ranking, which reveals a clear strategic priority. Wastewater Reuse emerges as the top-ranked intervention due to its unparalleled combination of high-water augmentation potential and a direct, high-magnitude pollution reduction co-benefit, aligning perfectly with the circular economy paradigm. NRW Reduction ranks second, justified by its exceptional economic viability and significant water saving potential. Rainwater Harvesting ranks third, scoring highly on feasibility and co-benefits (flood mitigation, groundwater improvement). Notably, large-scale infrastructure projects like the Upper Yamuna Storage Dams rank lower (5th) due to low scores on implementation feasibility (interstate complexities) and economic viability (high capital cost), despite their high-water potential. The water efficient fixture has gained rank 4th as it is achievable with the political intervention. This analysis provides a powerful, multi-faceted justification for prioritizing demand management and circular economy interventions over traditional supply-side projects for achieving a sustainable and resilient water future for Delhi. Sensitivity analysis results To test the robustness of the proposed water resilience framework, a sensitivity analysis was performed by varying key parameters within realistic ranges. The sensitivity analysis (Fig. 4) shows that population growth rate has the largest impact on net water balance, followed by NRW reduction and wastewater reuse adoption. Under pessimistic assumptions (high population growth of 3.0%, weak NRW control with only 25% reduction achieved, and low reuse adoption at 50% of target), the net balance could shift to a deficit of approximately 1200 MLD by 2045. Conversely, strong governance, technological execution, and public participation could increase the surplus beyond 5000 MLD. Figure 2 and supplementary Table S1 below shows the parameters and ranges for sensitivity analysis. Probability distribution chart for the projected 2045 water surplus Uncertainty analysis results Monte Carlo simulation (10,000 iterations, Gelman-Rubin R̂ = 1.006) produced a 90% confidence interval for the 2045 net water balance ranging from − 1200 MLD (deficit) to + 2500 MLD (surplus), with a mean of + 650 MLD. The probability of achieving a surplus (positive balance) is approximately 65%. The distribution is positively skewed (right-tailed), indicating that aggressive implementation of interventions (e.g., high reuse adoption, effective NRW control) can yield larger-than-expected benefits, providing a buffer against risks. However, the long-left tail underscores the real risk of a significantly smaller surplus or deficit if key interventions underperform. Similarly, the analysis for BOD load reduction showed a 90% confidence interval of 900 to 1200 tons per day. Discussion Interpretation of findings This study demonstrates that Delhi’s path to water resilience is not predicated on discovering new distant water sources but on a fundamental restructuring of its urban water metabolism from a linear to a circular model. Under the ambitious CR scenario, the net balance is a modest surplus of approximately 4048 MLD, and under pessimistic assumptions, a deficit remains possible. The uncertainty analysis confirms that the probability of achieving surplus is approximately 65%, not a certainty. Crucially, this potential surplus is primarily driven by internal loops, wastewater reuse and NRW reduction, which are within Delhi’s jurisdictional and managerial control, thereby reducing its vulnerability to interstate hydrological politics23. This finding aligns with a global paradigm shift where cities like Singapore have demonstrated that sovereignty over water is increasingly defined by the efficiency of the urban water cycle itself12. The dual role of wastewater reuse The most significant finding of this research is the dual role of wastewater reuse as the cornerstone for both water security and river restoration. The quantification in “Pollution load reduction potential” reveals that achieving the full reuse potential of 4540 MLD would directly abate over 70% of the current organic pollutant load into the Yamuna. This transforms the perception of sewage from a liability to the most viable resource for “cleaning” the river. This aligns with the circular economy principle of “designing out” waste28,29. Real-world implementation barriers and mitigation strategies Translating the proposed technical roadmap into reality faces four principal categories of barriers, which must be acknowledged and addressed. Institutional and political barriers: The most significant risk to the roadmap is the reliance on interstate cooperation. The projected 1,820 MLD from Upper Yamuna Storage Dams (Renuka, Lakhwar, Kishau) has been under negotiation for decades. The MCDA (Table 2) correctly ranks this intervention low on feasibility. Mitigation: Delhi must treat these projects as a political priority but cannot wait for them. The framework’s strength lies in prioritizing wastewater reuse and NRW reduction (Rank #1 and #2), which are within Delhi Jal Board’s direct control, thus decoupling resilience from interstate uncertainty. Financial barriers and investment models: The upfront capital cost for tertiary treatment plants, dual-piping infrastructure, and smart metering for NRW control will run into billions of USD. Mitigation: Innovative financing is required, including (a) municipal green bonds, (b) public-private partnerships (PPPs) for large-scale reuse plants where the “product” (recycled water) is sold to industries, and (c) integrating water infrastructure into broader climate resilience funding streams. Social and behavioral barriers: Public acceptance of recycled water for non-potable uses is generally high in global studies, but acceptance for potable reuse (even indirect) is low30,31. Mitigation: A phased, transparent public engagement campaign is essential, starting with visible non-potable reuse in parks and public buildings. This should be coupled with a strong communication narrative linking “every drop reused to a cleaner Yamuna.” Energy-intensity trade-off: Advanced wastewater treatment for reuse is energy intensive, typically requiring 0.6–1.2 kWh/m³ for secondary treatment and 1.0-1.5 kWh/m³ for advanced tertiary treatment. The projected 4,540 MLD reuse would require approximately 1.6–2.5 TWh per year. Mitigation: This trade-off can be partially offset by sludge-to-energy synergy (capturing methane from anaerobic digestion). Furthermore, the energy cost must be compared to the avoided energy of importing water over long distances or pumping groundwater from deeper, depleting aquifers. Global comparative analysis This study shows that the findings position Delhi’s potential pathway within a global context. Unlike Singapore, which has achieved high-tech, centralized reuse, Delhi’s scale and governance challenges suggest a more hybrid approach, combining centralized plants with decentralized systems for large campuses and industries13,29. The comparison with Cape Town’s “Day Zero” crisis serves as a stark warning; delaying demand-side management and reuse until a crisis point imposes severe socio-economic costs17,18. Delhi’s opportunity lies in proactive, rather than reactive, investment in circular infrastructure. Circular economy synergies The transition from a linear to a circular water economy generates significant co-benefits beyond water augmentation, creating a positive feedback loop that improves air quality, reduces greenhouse gas emissions, and enhances soil health. The supplementary Table S2 summarizes these key synergies. This synergy analysis demonstrates that the circular framework is a powerful tool for integrated environmental management. For instance, wastewater reuse is not just a water strategy; it is also a pollution control and energy conservation strategy. Similarly, sludge-to-energy transforms a waste management problem into a source of renewable energy and sustainable agriculture, addressing the water-energy-food nexus25,32. Conclusion and policy implications This study clearly shows that an additional 8878 MLD can be mobilized through a phased strategy, with wastewater reuse (4540 MLD) and NRW reduction (2120 MLD) offering the largest contributions. This can create a surplus of ~ 4048 MLD by 2045 with projected population of 54.4 million, using CPHEEO norms, this yields a potential surplus of approximately 4048 MLD, with a 90% confidence interval ranging from deficit of 1200 MLD to surplus of 2500 MLD. The water surplus is highly sensitive to NRW reduction and reuse adoption, while pollution reduction is exclusively dependent on maintaining high wastewater treatment efficiency. Success hinges on merging legal interventions (securing interstate shares), technological deployment (reuse, RWH), and behavioral change (public acceptance of reuse) into a single, coherent governance framework. The primary trade-off is high upfront cost and energy use, offset by long-term water security, massive pollution abatement, and energy recovery. The energy implications of advanced wastewater treatment and reuse are a critical consideration in the proposed circular water pathway. Advanced secondary and tertiary treatment processes typically require 0.6–1.2 kWh m⁻³ of treated wastewater, depending on treatment configuration and effluent quality targets, while advanced tertiary treatment for high-grade non-potable or indirect potable reuse may increase energy demand to approximately 1.0–1.5 kWh m⁻³. Applying these ranges to Delhi’s projected large-scale wastewater reuse potential of 4,540 MLD, the associated electricity demand would be on the order of 1.6–2.5 TWh per year under full-scale implementation. Delhi’s path mirrors global leaders in integrating supply and demand but must be tailored to its unique governance scale. To operationalize these findings, the following priority actions regarding policy are recommended: i.Prioritize Large-Scale Wastewater Reuse for Pollution Control. Institutionalize and fast-track the mandate for tertiary treatment plants and dual-piping systems in new developments. Frame this not just as a water project, but as the central pillar of the “Clean Yamuna” mission, directly linking investment to measurable pollution reduction targets. Prioritize Large-Scale Wastewater Reuse for Pollution Control. Institutionalize and fast-track the mandate for tertiary treatment plants and dual-piping systems in new developments. Frame this not just as a water project, but as the central pillar of the “Clean Yamuna” mission, directly linking investment to measurable pollution reduction targets. ii.Integrate Pollution Load Reduction Targets into Water Resource Planning. The Delhi Jal Board and the Environment Department should adopt mandatory, trackable metrics for pollutant load reduction (e.g., tons of BOD reduced per year) as a key performance indicator, alongside traditional water supply targets. Integrate Pollution Load Reduction Targets into Water Resource Planning. The Delhi Jal Board and the Environment Department should adopt mandatory, trackable metrics for pollutant load reduction (e.g., tons of BOD reduced per year) as a key performance indicator, alongside traditional water supply targets. iii.Foster Inter-Departmental Coordination between water and environmental protection agencies. Establish a high-powered, inter-departmental task force with the mandate and budget to break down silos. This body should oversee the integrated implementation of water reuse, sludge-to-energy projects, and river water quality monitoring. Foster Inter-Departmental Coordination between water and environmental protection agencies. Establish a high-powered, inter-departmental task force with the mandate and budget to break down silos. This body should oversee the integrated implementation of water reuse, sludge-to-energy projects, and river water quality monitoring. iv.Implement Public Awareness Campaigns Focusing on the Pollution Benefits. Shift public communication from a scarcity narrative to a restorative one. Launch campaigns demonstrating that “Every Drop Reused is a Cleaner Yamuna” to build social license for water recycling and encourage the adoption of water-efficient fixtures. Implement Public Awareness Campaigns Focusing on the Pollution Benefits. Shift public communication from a scarcity narrative to a restorative one. Launch campaigns demonstrating that “Every Drop Reused is a Cleaner Yamuna” to build social license for water recycling and encourage the adoption of water-efficient fixtures. v.Establish an independent implementation monitoring body with a mandate to enforce the phased roadmap, publicly report on NRW and reuse adoption metrics, and commission regular third-party audits of progress against the uncertainty ranges identified in this study. Establish an independent implementation monitoring body with a mandate to enforce the phased roadmap, publicly report on NRW and reuse adoption metrics, and commission regular third-party audits of progress against the uncertainty ranges identified in this study. Limitations of the study and future research directions While this research provides a robust strategic framework, several limitations must be acknowledged. First, the financial analysis, while accounting for capital and operational expenditures, did not conduct a full Life Cycle Cost Analysis (LCCA) or a detailed cost-benefit analysis. The high upfront capital requirements of large-scale reuse and treatment infrastructure were noted but not weighed against the long-term economic benefits of averted water scarcity, reduced health costs, and environmental restoration. Second, the environmental assessment of interventions, though qualitatively described, lacked a quantitative Life Cycle Assessment (LCA). The energy footprint and potential trade-offs, such as increased greenhouse gas emissions from advanced treatment processes, were not quantified, presenting an incomplete picture of the environmental nexus. Third, the quantification of health risks associated with material degradation and leaching (e.g., microplastics from HDPE pipes, heavy metals from corroding steel) were discussed descriptively but not monetized or integrated into the cost model. Incorporating these public health externalities would provide a more comprehensive socio-economic justification for material selection and infrastructure investment. Finally, the model’s projections, while based on best-available data, require validation through real-time performance monitoring and pilot-scale studies. The assumptions on using entire recycled water 1510 MLD, public acceptance and behavioral change, though informed by surveys, need to be tested through large-scale demonstration projects to accurately gauge adoption rates and social feasibility. To build upon this work and address its limitations, the following research directions are proposed: Comprehensive Life Cycle Sustainability Assessment: Future studies should conduct an integrated Life Cycle Assessment (LCA) and Life Cycle Cost Analysis (LCCA) of the proposed interventions. This would quantify the full environmental footprint (carbon, energy, water) and economic viability, providing a definitive comparison of the circular pathway against business-as-usual scenarios. Monetization of Externalities and Health Co-Benefits: Research is needed to monetize the positive externalities of the proposed framework, such as the economic value of a cleaner Yamuna River (e.g., tourism, property value increase, biodiversity) and the public health cost savings from reduced waterborne diseases and pollution-related illnesses. This would create a stronger economic case for investment. Hydro-Economic and Climate Resilience Modeling: Employ integrated modeling tools (e.g., WEAP-MODFLOW coupling) to simulate the hydro-economic impacts of the interventions under various climate change scenarios. This would enhance the framework’s dynamism and ability to support adaptive, climate-resilient planning. Socio-Technical Studies on actual recycled water being used against potential utilization, Public Acceptance: In-depth socio-technical research is crucial to understand the drivers of and barriers to public acceptance of recycled water for both non-potable and, eventually, potable uses. This includes designing and evaluating the effectiveness of different communication strategies and incentive structures. Supplementary Information Below is the link to the electronic supplementary material. Supplementary Material 1 Acknowledgements The authors gratefully acknowledge the support of the Delhi Jal Board, Central Ground Water Board, and Central Water Commission for providing essential data and technical insights that enabled this study. We also thank the field engineers, treatment plant operators, and community stakeholders who generously shared their time and on-ground perspectives during site visits and consultations. Their contributions significantly strengthened the practical relevance and policy value of this work. Author contributions Radhey Shyam Tyagi (Corresponding Author): conceptualized the study, designed the research framework, conducted field surveys across wastewater treatment plants, and drafted the initial manuscript. Prof. S.K. Singh: contributed to the methodology development, data validation, and critical revision of the manuscript for important intellectual content. Prof. P.K. Goyal: supported the technical analysis of treatment technologies, contributed to the literature review, and provided supervision throughout the research. All authors read and approved the final manuscript. Funding This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. The study was carried out as part of the academic research activities under Delhi Technological University. Data availability On behalf of all authors, the corresponding authors declare that all data used in the manuscript will be made available on demand. Declarations Competing interests The authors declare no competing interests. Ethical approval and compliance with guidelines All methods used in this study were carried out in accordance with the relevant institutional, national, and international guidelines and regulations. Because the research involved field inspections, stakeholder consultations, and interviews with engineers, operators, and residents, the full study protocol was reviewed by the Delhi Technological University (DTU), New Delhi, India, which approved, and confirmed that the study meets the standards for non-interventional, observation-based human research. Consent for publication All authors have reviewed and approved the final version of the manuscript and consent to its submission for publication in the journal of “Environmental Monitoring and Assessment”. The content has not been published elsewhere and is not under consideration by any other journal. No individual person’s data in any form (including individual details, images, or videos) is included in this manuscript, and thus no additional consent is required. Informed consent It was obtained from all individuals who participated in stakeholder consultations, field discussions, or interviews. Where participants represented government departments or agencies, consent was obtained from authorized officials. No identifiable personal information, images, or sensitive data were collected. Footnotes Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. References Associated Data Supplementary Materials Supplementary Material 1 Data Availability Statement On behalf of all authors, the corresponding authors declare that all data used in the manuscript will be made available on demand.