Geospatial mapping, risk assessment and multivariate analysis of naturally occurring radionuclides and potentially toxic elements in agrarian soils of SAS Nagar, Punjab, India Authors: Sanjeet S. Kaintura, Om Prakash Pandey, Mukesh Prasad, Navjot Kaur, Sarabjot Kaur, Froukje M. van der Zwan, Pushpendra P. Singh Published: 2026 ABSTRACT Rapid urbanization, industrialization, and agricultural advancements underscore the need to monitor environmental radionuclides and potentially toxic elements (PTEs) for pollution and human health impact assessment. This study assessed human health risks associated with radionuclides and PTEs in agricultural soils of the SAS Nagar District, Punjab, India, using ICP-MS and XRF techniques. Mean radionuclide concentrations were found to be 34.7 ± 3.1 Bq kg-1 (238U), 56.5 ± 8.4 Bq kg-1 (232Th), and 556.8 ± 93.1 Bq kg-1 (40K), respectively, with levels all above corresponding global means. Elemental concentrations (ppm) followed a decreasing sequence: Fe (29,148) > > Zn (67.4) > Cr (55.7) > Ni (25.5) > Cu (23.4) > Pb (18.6) > Th (13.9) > Co (8.8) > As (6.5) > U (2.8) > Cd (0.17). Pollution indices identified As and Cd as the dominant contributors to soil contamination, with U and Cr exerting moderate secondary effects. A multi-pathway exposure model indicates carcinogenic risks within the permissible range; however, As, Cr, and Ni remain within tolerable limits (10−6–10−4) but still signify potential concern. IDW-based spatial mapping of selected radionuclides and PTEs revealed zones of co-contamination across the study area. Spearman’s rank correlations show strong to very strong monotonic relationships among most soil variables. Principal Component Analysis (PCA) showcased that the first three components explained a major portion (78.2%) of the total variance. PCA separates variables driven by common environmental processes from those influenced by geogenic and anthropogenic factors, while Hierarchical Cluster Analysis (HCA) groups parameters with similar behavior reflecting these controls. Collectively, these findings emphasize the need for targeted soil quality monitoring to safeguard long-term soil quality and public health.Supplementary InformationThe online version contains supplementary material available at https://doi.org/10.1038/s41598-026-51494-y. Introduction Ensuring safe and nutritious food remains central to United Nations Sustainable Development Goals (SDGs), specifically Goals 2 (Zero Hunger) and 3 (Good Health and Well-Being), as sustainable food security relies on equitable access, resilient production, and the conservation of land, water, and genetic resources1. However, the rising accumulation of radionuclides and potentially toxic elements (PTEs) in soils and edible portions of plants poses an escalating global threat to environmental quality, food safety, and human health2. Naturally occurring radioactive materials (NORMs) comprise terrestrial (primordial) radioisotopes (i.e., 238U, 232Th, and 40K), formed by nucleosynthesis3. Alterations in the natural distribution or geochemical behavior of NORM can generate technologically enhanced NORM (TENORM) with elevated radioactivity. Industrial and agricultural activities, including mineral extraction and processing, oil and gas production, geothermal operations, fertilizer and pesticide use, and water treatment, can concentrate these materials4,5. Naturally occurring radionuclides (NORs) originating from bedrock are mobilized into soils, water, biota, and the atmosphere through geochemical, physicochemical, and biogenic processes and, once assimilated by plants and animals, enter the human food chain via ingestion or inhalation, contributing to unavoidable dietary exposure2,3,6–8. Among the aforementioned environmental matrices, soil functions as a critical source, pathway, and sink for the migration of radionuclides and PTEs into the human body, mainly through soil-to-plant transfer, reflected in radioactivity in food crops and animal uptake9–11. As the primary interface of the food chain and a major reservoir of nutrients, soil contamination with NORs and PTEs poses a serious environmental hazard, necessitating effective remediation measures to protect and restore soil health and ecosystem integrity12,13. Further, radiation emitted from naturally radioactive soils represents a major global source of both environmental and food-chain contamination14. Scientific assessments indicate that about 80% of the annual natural radiation dose to humans arises from soil- and rock-derived radionuclides, primarily through radon exhalation, terrestrial gamma radiation, and radionuclide transfer into environmental media, with roughly 60–70% attributed directly or indirectly to soils15–18. Additionally, the concentrations of NORs in agricultural soil directly influence their transfer into the food chain, as these radionuclides accumulate and persist within the plant root-accessible topsoil (0–30 cm), contributing to long-term environmental radioactivity19. Over the past six decades, efforts to increase agricultural productivity have driven widespread use of organic and inorganic fertilizers and pesticides, leading to elevated environmental risks, particularly soil contamination from anthropogenic inputs5,11. Radionuclides are of particular concern and enter agroecosystems mainly through fertilizers. Phosphate fertilizers sourced from phosphate rock contain 238U and 232Th, while potassium-based fertilizers predominantly contain 40K. The global annual application of over 30 million metric tons of such fertilizers results in measurable amounts in soils, contributing to radionuclide accumulation20. Next, radionuclide accumulation in soil is controlled by physicochemical properties (pH, organic matter, and electrical conductivity (EC)) and land-use practices, particularly agriculture, mining, industry, and urbanization. The application of fertilizers and pesticides, together with poorly managed industrial and mining wastes, promotes long-term buildup in soils and sediments, with fine-grained stream sediments retaining higher radionuclide levels than nearby soils21,22. Uranium (U) and thorium (Th) can act as both chemical and radiological toxicants. Prolonged exposure to radionuclides at elevated levels may have serious implications for human health. Uranium bioaccumulation can disrupt multiple organ systems and is associated with lung cancer, anemia, tissue necrosis, neurological disorders, hypertension, cardiac dysfunction, obesity, and acute leukopenia. The exposure from thorium is linked to cancers of the kidney, liver, pancreas, bone, and lung, as well as leukemia23–25. Although potassium is essential, deficiency or excess can cause neuromuscular and cardiac dysfunction, highlighting the need for strict exposure monitoring26. The contamination due to PTEs has become another major environmental issue driven mainly by human activities, with natural processes contributing only background levels27. Industrial operations, transportation, agriculture, and poor waste management have converted many agricultural soils into PTE reservoirs, reducing fertility, impairing crop productivity, and extending contamination to aquatic ecosystems through runoff. Elements such as Co, Cu, and Zn are essential micronutrients, but become phytotoxic at elevated levels, whereas As, Cd, Pb, Cr, and Ni are toxic even at trace concentrations for human health28. Globally, nearly five million soil sites exceed regulatory PTE limits, compromising soil quality and agricultural productivity29. This problem is further intensified by the widespread use of NPK fertilizers containing trace elements. Fertilizer consumption has risen sharply in East Asia (31%), South Asia (20%), and Latin America and the Caribbean (14%)30, underscoring the trade-off between productivity gains and environmental contamination. Additional sources, including mining, smelting, petrochemical activities, and sewage-sludge application, alter soil physicochemical properties and promote long-term persistence of PTEs. PTEs threaten human health by disrupting essential biological functions; chronic exposure is associated with gastrointestinal disorders, dermatological lesions, anemia, hypertension, respiratory diseases, cardiovascular and hematopoietic abnormalities, and various cancers, including leukemia28,31. Environmental toxins are an important determinant of human health. The American Cancer Society (ACS) classifies all NORs and several toxic elements (As, Cd, Cr (VI)) as established carcinogens, whereas Pb is considered a probable carcinogen32,33. Furthermore, the regions enriched in NORs frequently exhibit co-occurring toxic elements, suggesting a shared geochemical origin and potential localized cancer risk34,35. Punjab, the cradle of India’s Green Revolution, remains a pivotal agricultural hub, advancing from traditional practices to modern ones, where over 39% of the workforce depends on farming36. Several regions of the state report elevated and spatially variable concentrations of uranium and PTEs such as Cr, As, and Pb in water sources37,38. Rapid demographic growth and industrial intensification have accelerated urban expansion in the Shaheed Ajeet Singh (SAS) Nagar district, driven by rising socio-economic aspirations and increasing demand for urban amenities. In response, the Government of Punjab has constituted statutory planning bodies under the Punjab Urban Development Authority (PUDA), among which the Greater Mohali Area Development Authority (GMADA) is strategically significant due to its proximity to the Chandigarh metropolitan area36. Advanced analytical techniques are vital for accurate radionuclide and elemental characterization. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) provides high sensitivity for detecting PTEs such as U and Th at ppb to ppt levels. X-ray Fluorescence (XRF) effectively quantifies elements with higher concentrations, while an element analyzer is suitable for determining organic matter and nitrogen content. Physicochemical parameters, including pH and EC, are best measured using a calibrated pH/EC meter. Therefore, this study investigates the agricultural soils of SAS Nagar district, Punjab, India, with the following objectives: (a) to evaluate the levels and geospatial mapping of NORs (238U, 232Th, and 40K); (b) to assess soil physicochemical properties (pH, EC, TDS, and organic carbon) and essential nutrients (N, P, and K); (c) to quantify the concentration levels of PTEs (Pb, Cd, As, Co, Cr, Ni, Fe, Zn, Cu, U, and Th) for geospatial mapping, pollution assessment and human health risk evaluation (carcinogenic and non-carcinogenic); and (d) to identify potential contamination sources using multivariate statistical analyses (Spearman’s rank correlation, PCA and HCA). This study establishes baseline data through a systematic approach to assess radioactive and trace-element contaminants and their influencing factors in agricultural soils, employing state-of-the-art techniques. So far, integrated data on concentrations of NORs and PTEs remain limited and fragmented, and no comprehensive study focusing on agricultural soils has been conducted in the SAS Nagar district, despite the availability of data for other soil types. This underscores the need for a detailed assessment of their contamination and associated health risks. The findings provide insights into the effects of agricultural practices on soil quality, with implications for the food chain and land-use patterns in the study region. Study area Situated in eastern Punjab, SAS Nagar covers approximately39 1,094 km2 and has a population of about 994,628. The district extends between latitudes 30°21′–30°56′ N and longitudes 76°30′–76°55′ E. The GIS-based map of the sampling locations in the study area is presented in Fig. 1. SAS Nagar district is geographically bordered by Patiala and Fatehgarh Sahib districts to the southwest, Rupnagar to the northwest, Chandigarh and Panchkula to the east, and Ambala district of Haryana to the south40. Agriculture is the primary source of livelihood for the district’s workforce. The district hosts more than 6,391 registered industrial units, according to the Ministry of Micro, Small, and Medium Enterprises (MSME). The prevalence of steel, automobile, metal, chemical, textiles, pharmaceuticals, paper, food, tractor, semiconductors, bottling, precision tools, and auto-parts industries may contribute to soil contamination by PTEs such as Cr, Co, and Ni39,41. Located near the Shivalik foothills, large portions of the region fall within environmentally sensitive zones, including protected and reserved forests and areas regulated under the Punjab Land Preservation Act (PLPA). The terrain is predominantly flat, with a gentle south-westerly slope that facilitates drainage into the Ghaggar River system and its tributaries.Fig. 1Spatial layout of soil sampling sites in SAS Nagar District (prepared using ArcGIS Pro, version 3.5.1; URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/). Shapefiles in this study were obtained from the Survey of India (URL: https://surveyofindia.gov.in/), and the Digital Elevation Model, ASTER GDEM (URL: https://asterweb.jpl.nasa.gov/gdem.asp), was used to display the elevation. Spatial layout of soil sampling sites in SAS Nagar District (prepared using ArcGIS Pro, version 3.5.1; URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/). Shapefiles in this study were obtained from the Survey of India (URL: https://surveyofindia.gov.in/), and the Digital Elevation Model, ASTER GDEM (URL: https://asterweb.jpl.nasa.gov/gdem.asp), was used to display the elevation. Geologically, SAS Nagar forms part of the Indo-Gangetic alluvial plains and is underlain by Quaternary alluvial deposits that constitute the principal aquifer system. The district comprises two major geomorphic units, an alluvial plain and an alluvial fan, both characterized by fertile soils enriched through periodic silt deposition, supporting intensive multi-cropping agriculture. The fertile alluvial plains hold substantial agricultural and economic significance, supporting a large portion of the district’s population. Soils, primarily developed on alluvial deposits, are shaped by climatic conditions, topography, and soil-forming processes. The district experiences a subtropical climate characterized by hot summers, mild winters, and a variable monsoon season. Frost is common in December and January. The region receives an average annual rainfall of about 617 mm, nearly 80% of which occurs during the southwest monsoon between July and August, with occasional winter showers from western disturbances. The region is predominantly covered by Solonchak-type tropical arid brown soils, with localized patches of loam, heavy loam, and sandy loam that support diverse agriculture, including cereals, pulses, vegetables, and orchards39. Experimental details Collection and pre-processing of samples A total of 26 soil samples were collected for this study in March 2023: 25 from farmland sites and 1 from a non-farmland site used as a control (Fig. 1). All farmland soil samples were collected after obtaining prior informed verbal consent from the farm owners. At each site, approximately 2 kg of soil was sampled from 2–30 cm depth after removing the topsoil to avoid surface contamination. Visible plant roots, glass fragments, stones, and other debris were removed in the field. Each sample was placed in a labelled container and logged with relevant sampling information (geographical coordinates, sample code, and collection date). All sampling locations were recorded using a handheld GPS device. After transport to the laboratory, samples were air-dried at room temperature for 24 h, followed by oven-drying at 70 °C for 48 h to achieve constant weight and eliminate residual moisture. The dried samples were subsequently sieved, homogenized, and milled as required before analysis using the appropriate instrumentation. Analysis of PTEs using ICP-MS For the analysis of PTEs, the concentrations of U, Th, Pb, Cd, As, Cr, Ni, Zn, Cu, and Co in soil samples were quantified employing a triple-quadrupole inductively coupled plasma mass spectrometer (QQQ-ICP-MS; Agilent 8800) at the Analytical Core Laboratory, King Abdullah University of Science and Technology (KAUST). Approximately 0.1 g of soil powder was subjected to acid digestion using a high-pressure microwave system (UltraCLAVE, Milestone), which allows simultaneous digestion of up to 40 samples under controlled temperature and pressure. The digestion procedure comprised three sequential steps. First, 1.5 mL of HF and 0.5 mL of HNO3 were added, and the samples were microwaved at 240 °C for 40 min. Second, 100 μL HClO4 was added, and the solutions were evaporated to dryness on a hot plate (HPX-200, Savillex) at 95 °C. Third, the residues were re-dissolved with 2 mL of HNO3 and 4.5 mL Milli-Q water and subjected to a second microwave digestion at 200 °C for 60 min to ensure complete matrix dissolution. Finally, the digests were diluted 1:5000 in 2% HNO3 and spiked with internal standards (Indium and Bismuth) to a final concentration of 20 ppb. Afterward, the solutions were analyzed directly by ICP-MS. Analytical quality assurance was verified using triplicate analyses (n = 3) of certified reference materials (CRMs), NIST SRM 2702 and JA-2. The measured concentrations agreed with certified values within ± 10%, and analytical precision (RSD) was < 5% for all elements except Cd (13%) and As (9%). ICP-MS limits of detection (LOD) for elements in ppm were: Cr (0.167), Ni (0.047), Cu (0.04), Zn (0.401), As (0.059), Cd (0.005), Pb (0.03), Th (0.01), and U (0.004). The resulting calibration curves exhibited excellent linearity (R2 ≥ 0.9997), confirming high analytical performance. A more comprehensive description of the sample digestion and ICP-MS analytical procedures is outlined by Cherviakouski et al.42. Elemental analysis using XRF and an elemental analyzer Major element concentrations were quantified using a wavelength-dispersive X-ray fluorescence (WD-XRF) spectrometer (Bruker S8 Tiger) at the Analytical Core Laboratory, KAUST. Approximately 0.5 g of finely ground and homogenized soil powder was used for the analysis. Analytical quality control was assessed through triplicate measurements (n = 3) of the NIST standard reference materials (SRMs) 1646a and 2702, which yielded accuracies within 5% and RSDs < 2% for all determinations except P, which is ~ 11%. The LOD of the elements (wt%) was: P (0.0026), K (0.0028), and Fe (0.0012). Total organic carbon (TOC) and nitrogen (N) were measured using a Thermo Scientific™ FlashSmart™ CHNS/O Elemental Analyzer at the Analytical Core Laboratory, KAUST. Soil powders (0.01 g) were placed in 10 × 10 mm silver capsules and treated with 100 μL of 1 N HCl to remove inorganic carbon. The samples were acid-treated, dried at 65 °C overnight to remove inorganic carbon, sealed in tin capsules, and then analyzed to determine N and TOC concentrations. Analytical quality control based on quintuplicate CRM analyses (n = 5) yielded < 10% accuracy error and RSD < 12% for all determinations. Instrument calibration and background indicated LOD of 0.031 wt% for TOC and 0.011 wt% for N. Physicochemical parameters using pH/EC meter To determine the pH, EC, and total dissolved solids (TDS), 8 g of soil was mixed with 40 mL of deionized water to obtain a 1:5 (w/v) soil-to-water suspension. The suspension was thoroughly homogenized on a magnetic stirrer for 10 h and filtered through a 125 µm filter paper. Measurements of pH, EC, and TDS were obtained using a calibrated multiparameter analyzer (HI98194, Hanna Instruments) at the Department of Chemical Engineering at IIT Ropar. Radioactivity quantification The activity concentrations (AC) of 238U, 232Th, and 40K were derived from their quantified elemental concentrations (EC) using a fundamental radiometric conversion (Eq. 1), which relates elemental abundance to radioactive decay through established nuclear constants43.1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}}_{\mathrm{c}}=\frac{{\uplambda}_{\mathrm{E}}\times {\mathrm{N}}_{\mathrm{A}}\times {\mathrm{f}}_{\mathrm{E}}}{{\mathrm{M}}_{\mathrm{E}}\times \mathrm{C}}\times {\mathrm{E}}_{\mathrm{c}}$$\end{document}where λE, NA, fE, and ME are the decay constant (s-1), Avogadro’s number (6.023 × 1023 atoms mol-1), natural abundance, and atomic mass (kg mol-1), respectively. C is the constant set to 106 for U and Th, and to 102 for K. Assessment of pollution and carcinogenic and non-carcinogenic risks of PTEs Pollution level assessment of PTEs Pollution indices provide a quantitative framework for evaluating the degree of soil contamination resulting from both anthropogenic and geogenic sources. The applied indicators to assess soil quality include contamination factor (CF), pollution load index (PLI), enrichment factor (EF), geoaccumulation index (Igeo), and ecological risk index (Ei). Contamination Factor: The CF quantifies the degree of anthropogenic enrichment and ecological risk associated with PTEs in soil relative to natural baseline levels. It is defined as the ratio between the measured concentration of a specific PTE in the soil (Ci) and its corresponding baseline concentration (Cb)44:2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{C}\mathrm{F}=\left(\frac{{\mathrm{C}}_{\mathrm{i}}}{{\mathrm{C}}_{\mathrm{b}}}\right)$$\end{document} The baseline values for the elements have been taken from Taylor and McLennan45. Pollution Load Index: The overall degree of PTE contamination in each soil sample can be quantitatively assessed using the PLI46, which is defined as:3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{P}\mathrm{L}\mathrm{I} ={\left({\mathrm{C}\mathrm{F}}_{1}\times {\mathrm{C}\mathrm{F}}_{2}\times {\mathrm{C}\mathrm{F}}_{3}\times \dots \dots .\times {\mathrm{C}\mathrm{F}}_{\mathrm{n}}\right)}^{\frac{1}{\mathrm{n}}}$$\end{document}where n denotes the number of elements quantified per sample. Geoaccumulation Index: The Igeo is a widely applied metric for assessing the degree of PTE contamination in agricultural and urban soils. It is expressed mathematically as follows47:4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{I}}_{\mathrm{g}\mathrm{e}\mathrm{o}}={\mathrm{l}\mathrm{o}\mathrm{g}}_{2}\left(\frac{{\mathrm{C}}_{\mathrm{i}}}{{1.5\times \mathrm{C}}_{\mathrm{b}}}\right)$$\end{document} The coefficient (1.5) serves to mitigate background variability and enhance the detection sensitivity to subtle anthropogenic disturbances. Enrichment Factor: The enrichment factor (EF) serves as a key indicator for assessing and distinguishing the extent of PTE contamination. The EF for each PTE in soil is determined using the following equation48,49:5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{E}\mathrm{F}=\left(\frac{{{(\mathrm{C}}_{\mathrm{i}}{/C}_{ref})}_{sample}}{{{(\mathrm{C}}_{\mathrm{b}}{/C}_{ref})}_{bkg}}\right)$$\end{document} In the EF calculation, Ci and Cref in the numerator represent the concentrations of element i and the reference element (RE) in the soil sample, while Cb ​ and Cref in the denominator denote their respective background levels(bkg). REs such as Sc, Mn, Ti, Al, Ca, Ni, and Fe are used because they typically exhibit low variability and a stable crustal flux. In the present work, Fe was selected as a reference element because of its relatively high abundance in soils and its suitability as an indicator of natural background levels48,49. EF values of 0.5–1.5 indicate a natural (crustal) origin, whereas EF > 1.5 suggests anthropogenic enrichment. Ecological Risk Index: The ecological risk index (ERI) is used to estimate the potential environmental hazards posed by trace-element contamination in soils. It incorporates elemental toxicity to provide an integrated measure of ecological risk to biota and is computed as44,50:6a\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{E}\mathrm{R}\mathrm{I}=\sum {\mathrm{E}}_{\mathrm{i}}$$\end{document}6b\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{E}}_{\mathrm{i}}= {\mathrm{T}}_{\mathrm{i}}.{\mathrm{f}}_{\mathrm{i}}= {\mathrm{T}}_{\mathrm{r}}.\frac{{\mathrm{C}}_{\mathrm{i}}}{{\mathrm{C}}_{\mathrm{b}}}$$\end{document} The individual ecological risk is expressed as Ei. The toxic response factor (Tr) indicates the toxicity of each PTE, while fi is the ratio of its concentration (Ci) to the background value (Cb). Tr values decrease in the order: U (40)51,52, Cd (30), As (10), Pb = Cu44 = Ni53,54 = Co (5), Cr (2), Zn (1)44, Fe (1)55. Soil pollution levels are classified according to pollution indices, as showcased in Table 1.Table 1Soil quality classification according to multiple pollution evaluation indices.CF44PLI46Igeo47EF49Ei44ERI44CF ˂ 1Low contaminationPLI ˂ 1Unpolluted soilIgeo ≤ 0UncontaminatedEF < 1No enrichmentEi ˂ 40Low˂ 150Low1 ≤ CF˂ 3Moderate contaminationPLI = 1Pollutant levels present0 ˂ Igeo ≤ 1Uncontaminated to moderately contaminated1 ≥ EF ≥ 3Minor40 ≤ Ei ˂ 80Fairly150–300Moderate3 ≤ CF˂ 6Considerable contaminationPLI ˃ 1Deterioration of soil quality1˂ Igeo ≤ 2Moderately contaminated3 ≥ EF ≥ 5Moderate80 ≤ Ei ˂160Considerable300–600HighCF ≥ 6Very high contamination2 ˂ Igeo ≤ 3Moderately to strongly contaminated5 ≥ EF ≥ 10Moderately severe160 ≤ Ei ˂320High˃ 600Very high3˂ Igeo ≤ 4Strongly contaminated10 ≥ EF ≥ 25SevereEi ≥ 320Very high4˂ Igeo ≤ 5Strongly to Extremely contaminated25 ≥ EF ≥ 50Very severeIgeo ˃ 5Extremely contaminatedEF > 50Extremely severe Table 1Soil quality classification according to multiple pollution evaluation indices.CF44PLI46Igeo47EF49Ei44ERI44CF ˂ 1Low contaminationPLI ˂ 1Unpolluted soilIgeo ≤ 0UncontaminatedEF < 1No enrichmentEi ˂ 40Low˂ 150Low1 ≤ CF˂ 3Moderate contaminationPLI = 1Pollutant levels present0 ˂ Igeo ≤ 1Uncontaminated to moderately contaminated1 ≥ EF ≥ 3Minor40 ≤ Ei ˂ 80Fairly150–300Moderate3 ≤ CF˂ 6Considerable contaminationPLI ˃ 1Deterioration of soil quality1˂ Igeo ≤ 2Moderately contaminated3 ≥ EF ≥ 5Moderate80 ≤ Ei ˂160Considerable300–600HighCF ≥ 6Very high contamination2 ˂ Igeo ≤ 3Moderately to strongly contaminated5 ≥ EF ≥ 10Moderately severe160 ≤ Ei ˂320High˃ 600Very high3˂ Igeo ≤ 4Strongly contaminated10 ≥ EF ≥ 25SevereEi ≥ 320Very high4˂ Igeo ≤ 5Strongly to Extremely contaminated25 ≥ EF ≥ 50Very severeIgeo ˃ 5Extremely contaminatedEF > 50Extremely severe Soil quality classification according to multiple pollution evaluation indices. Carcinogenic and non-carcinogenic risk assessment Human health risks associated with exposure to PTEs in soil were quantified using the United States Environmental Protection Agency (USEPA) methodology, which incorporates both non-carcinogenic and carcinogenic endpoints. Health risk assessment of PTEs in soil was performed for three major exposure pathways relevant to residential and agricultural settings: ingestion, dermal contact, and inhalation of resuspended particulates56,57. Exposure was quantified in terms of Average Daily Dose (ADD) for each pathway, which was subsequently used to evaluate non-carcinogenic effects in terms of Hazard Quotient (HQ) and Hazard Index (HI), as well as carcinogenic effects in terms of Incremental Lifetime Cancer Risk (CR), with cancer slope factors (SFs) (https://www.epa.gov/risk/regional-screening-levels-rsls-users-guide). This source-specific integrated approach, encompassing both non-carcinogenic toxicity and long-term carcinogenic risk, provides a mechanistic basis for understanding the link between soil contamination and public health. The key equations58,59, along with their descriptions and default parameter values, are summarized in Table 2. The reference doses (RfDs) and slope factors (SFs) used for different PTEs across exposure pathways are presented in Table S1. Human health risk assessment was conducted for adult farmers because the study sites are exclusively active agricultural lands representing an occupational exposure scenario. Children were not included as the area is non-residential with exposure largely limited to farming activities; therefore, direct soil exposure of children is considered negligible.Table 2Human health risk quantifiers resulting from exposure to PTEs in soil.Risk-quantifierEquationPhysical significance and parameter valuesChronic Daily Dose via ingestion (ADDing)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{i}\mathrm{n}\mathrm{g}}= \frac{{\mathrm{C}}_{\mathrm{s}}\times {\mathrm{I}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{g}}\times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}\times {10}^{-6}$$\end{document}(7a)Quantifies the long-term average amount of an element ingested from soil per unit body weight. It integrates daily intake with exposure years and normalizes it over the averaging time to reflect lifetime or chronic exposureCs​: soil element concentration (mg kg-1), IRing: Ingestion rate (100 for adult)​, EF: Exposure frequency (350 days year-1), ED: Exposure duration (30 years), BW: Body weight (70 kg adult), and AT: Lifetime averaging time (25,550 days)Chronic Daily Dose via dermal contact (ADDderm)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{d}\mathrm{e}\mathrm{r}\mathrm{m}}=\frac{{\mathrm{C}}_{\mathrm{s}}\times \mathrm{S}\mathrm{A} \times \mathrm{A}\mathrm{F} \times {\mathrm{A}\mathrm{B}\mathrm{S}}_{\mathrm{d}} \times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}\times {10}^{-6}$$\end{document}(7b)Reflects the amount of element absorbed through the skin during soil contact. It accounts for skin area, soil adhesion, and absorption efficiency, translating external contact into internal doseSA: Skin-surface area (5700 cm2 for adult), AF: Soil-to-skin adherence factor (0.07 for adult), and ABSd: Dermal absorption factor (0.001)Chronic Daily Dose via inhalation (ADDinh)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{i}\mathrm{n}\mathrm{h}}=\frac{{\mathrm{C}}_{\mathrm{s}}\times {\mathrm{I}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{h} }\times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{P}\mathrm{E}\mathrm{F} \times \mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}$$\end{document}(7c)Estimates exposure due to inhalation of resuspended soil dust. The PEF converts soil concentration to airborne levels, linking soil contamination to breathing-zone exposureIRinh: Inhalation rate (20 m3 day-1), PEF: soil-to-air particulate emission factor (1.36 × 109 m3 kg-1)Hazard Quotient (HQ)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{HQ}} = \frac{{{\mathrm{ADD}}}}{{{\mathrm{RfD}}}}$$\end{document}(8)Compares actual exposure with the maximum safe exposure or reference dose (RfD) for each element and pathway. HQ > 1 suggests potential risk of systemic toxicity due to sustained element exposureHazard Index (HI)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{H}\mathrm{I}=\sum {\mathrm{H}\mathrm{Q}}_{\mathrm{i}}$$\end{document}(9)Represents cumulative non-cancer risk from multiple elements (i). It captures overall toxic pressure when exposures combine additivelyCancer Risk (CR)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} & {\mathrm{CR}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ & \quad = {\mathrm{ADD}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \times {\mathrm{SF}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ \end{aligned}$$\end{document}(10a)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{T}\mathrm{C}\mathrm{R}={\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{g}}+{\mathrm{C}\mathrm{R}}_{\mathrm{d}\mathrm{e}\mathrm{r}\mathrm{m}}+{\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{h}}$$\end{document} (10b)CR provides an integrated lifetime cancer probability from all exposure pathways (oral intake, dermal absorption, and element-laden dust inhalation), enabling comparison with regulatory thresholds (10–6 to 10–4)SF: Path-specific cancer slope factor Table 2Human health risk quantifiers resulting from exposure to PTEs in soil.Risk-quantifierEquationPhysical significance and parameter valuesChronic Daily Dose via ingestion (ADDing)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{i}\mathrm{n}\mathrm{g}}= \frac{{\mathrm{C}}_{\mathrm{s}}\times {\mathrm{I}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{g}}\times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}\times {10}^{-6}$$\end{document}(7a)Quantifies the long-term average amount of an element ingested from soil per unit body weight. It integrates daily intake with exposure years and normalizes it over the averaging time to reflect lifetime or chronic exposureCs​: soil element concentration (mg kg-1), IRing: Ingestion rate (100 for adult)​, EF: Exposure frequency (350 days year-1), ED: Exposure duration (30 years), BW: Body weight (70 kg adult), and AT: Lifetime averaging time (25,550 days)Chronic Daily Dose via dermal contact (ADDderm)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{d}\mathrm{e}\mathrm{r}\mathrm{m}}=\frac{{\mathrm{C}}_{\mathrm{s}}\times \mathrm{S}\mathrm{A} \times \mathrm{A}\mathrm{F} \times {\mathrm{A}\mathrm{B}\mathrm{S}}_{\mathrm{d}} \times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}\times {10}^{-6}$$\end{document}(7b)Reflects the amount of element absorbed through the skin during soil contact. It accounts for skin area, soil adhesion, and absorption efficiency, translating external contact into internal doseSA: Skin-surface area (5700 cm2 for adult), AF: Soil-to-skin adherence factor (0.07 for adult), and ABSd: Dermal absorption factor (0.001)Chronic Daily Dose via inhalation (ADDinh)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{A}\mathrm{D}\mathrm{D}}_{\mathrm{i}\mathrm{n}\mathrm{h}}=\frac{{\mathrm{C}}_{\mathrm{s}}\times {\mathrm{I}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{h} }\times \mathrm{E}\mathrm{F} \times \mathrm{E}\mathrm{D}}{\mathrm{P}\mathrm{E}\mathrm{F} \times \mathrm{B}\mathrm{W} \times \mathrm{A}\mathrm{T}}$$\end{document}(7c)Estimates exposure due to inhalation of resuspended soil dust. The PEF converts soil concentration to airborne levels, linking soil contamination to breathing-zone exposureIRinh: Inhalation rate (20 m3 day-1), PEF: soil-to-air particulate emission factor (1.36 × 109 m3 kg-1)Hazard Quotient (HQ)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{HQ}} = \frac{{{\mathrm{ADD}}}}{{{\mathrm{RfD}}}}$$\end{document}(8)Compares actual exposure with the maximum safe exposure or reference dose (RfD) for each element and pathway. HQ > 1 suggests potential risk of systemic toxicity due to sustained element exposureHazard Index (HI)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{H}\mathrm{I}=\sum {\mathrm{H}\mathrm{Q}}_{\mathrm{i}}$$\end{document}(9)Represents cumulative non-cancer risk from multiple elements (i). It captures overall toxic pressure when exposures combine additivelyCancer Risk (CR)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} & {\mathrm{CR}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ & \quad = {\mathrm{ADD}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \times {\mathrm{SF}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ \end{aligned}$$\end{document}(10a)\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{T}\mathrm{C}\mathrm{R}={\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{g}}+{\mathrm{C}\mathrm{R}}_{\mathrm{d}\mathrm{e}\mathrm{r}\mathrm{m}}+{\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{h}}$$\end{document} (10b)CR provides an integrated lifetime cancer probability from all exposure pathways (oral intake, dermal absorption, and element-laden dust inhalation), enabling comparison with regulatory thresholds (10–6 to 10–4)SF: Path-specific cancer slope factor Human health risk quantifiers resulting from exposure to PTEs in soil. Quantifies the long-term average amount of an element ingested from soil per unit body weight. It integrates daily intake with exposure years and normalizes it over the averaging time to reflect lifetime or chronic exposure Cs​: soil element concentration (mg kg-1), IRing: Ingestion rate (100 for adult)​, EF: Exposure frequency (350 days year-1), ED: Exposure duration (30 years), BW: Body weight (70 kg adult), and AT: Lifetime averaging time (25,550 days) Reflects the amount of element absorbed through the skin during soil contact. It accounts for skin area, soil adhesion, and absorption efficiency, translating external contact into internal dose SA: Skin-surface area (5700 cm2 for adult), AF: Soil-to-skin adherence factor (0.07 for adult), and ABSd: Dermal absorption factor (0.001) Estimates exposure due to inhalation of resuspended soil dust. The PEF converts soil concentration to airborne levels, linking soil contamination to breathing-zone exposure IRinh: Inhalation rate (20 m3 day-1), PEF: soil-to-air particulate emission factor (1.36 × 109 m3 kg-1) \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} & {\mathrm{CR}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ & \quad = {\mathrm{ADD}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \times {\mathrm{SF}}_{{{\mathrm{ing}}/{\mathrm{derm}}/{\mathrm{inh}}}} \\ \end{aligned}$$\end{document}(10a) \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{T}\mathrm{C}\mathrm{R}={\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{g}}+{\mathrm{C}\mathrm{R}}_{\mathrm{d}\mathrm{e}\mathrm{r}\mathrm{m}}+{\mathrm{C}\mathrm{R}}_{\mathrm{i}\mathrm{n}\mathrm{h}}$$\end{document} (10b) CR provides an integrated lifetime cancer probability from all exposure pathways (oral intake, dermal absorption, and element-laden dust inhalation), enabling comparison with regulatory thresholds (10–6 to 10–4) SF: Path-specific cancer slope factor Geospatial mapping and multivariate analysis The study-area map and contour maps were generated using ArcGIS Pro (version 3.5.1). Geographic Information System (GIS) tools were used to integrate and analyze the spatial distribution of soil radionuclide and PTE data, enabling the visualization of areas with elevated concentrations and potential cross-contamination, and supporting the interpretation of spatial trends relevant to environmental and public-health assessment60,61. These contours or surfaces were generated using the geostatistical technique known as the Inverse Distance Weighting (IDW) interpolation algorithm within the Spatial Analyst toolbox. IDW estimates values by weighting nearby sampled data points more heavily than those farther away, based on the inverse of their separation distance raised to a specified power. Multivariate analyses, including Spearman’s correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA), were conducted using OriginPro 2026 to identify relationships and underlying patterns in the dataset. Spearman’s rank correlation quantified the strength and direction of associations between variables62,63. PCA, applied to the correlation matrix, reduced dimensionality by transforming correlated variables into a smaller set of independent principal components, representing the major sources of variance. HCA organizes variables with similar characteristics into distinct clusters, revealing natural patterns or structures within the data. Together, PCA and HCA provided complementary insights, with PCA highlighting the key factors driving variability and HCA identifying grouping trends48. Results and discussion Radioactivity levels and spatial distributions The estimated radioactivity concentrations of 238U, 232Th, and 40K have been summarized in Table 3. The activity concentration of radionuclides in agricultural soil follows the trend: 40K > 232Th > 238U. Hence, the activity concentrations of 238U, 232Th, and 40K were found to vary from 26.7–39.5 (mean = 34.7 ± 3.1) Bq kg-1, 43.9–89.3 (mean = 56.5 ± 8.4) Bq kg-1, and 399.5–751.4 (556.8 ± 93.1) Bq kg-1, respectively. The RSDs associated with the respective radionuclide concentrations were calculated as 8.9%, 14.9%, and 16.7%, in the same order. The average levels of 238U, 232Th, and 40K in the agricultural soils exceed their corresponding global mean values of 33, 45, and 445 Bq kg-1, respectively64.Table 3The statistical summary of activity concentration of different radionuclides (238U, 232Th, and 40K). The control value refers to all values from S1C (control sample).Statistical parameter238U (Bq kg-1)232Th (Bq kg-1)40K (Bq kg-1)Min26.743.9399.5Max39.589.3751.4Avg34.756.5556.8SD3.18.493.1RSD%8.914.916.7Skewness-0.62.50.2Kurtosis0.79.5-0.3Control value37.765.9453.4 Table 3The statistical summary of activity concentration of different radionuclides (238U, 232Th, and 40K). The control value refers to all values from S1C (control sample).Statistical parameter238U (Bq kg-1)232Th (Bq kg-1)40K (Bq kg-1)Min26.743.9399.5Max39.589.3751.4Avg34.756.5556.8SD3.18.493.1RSD%8.914.916.7Skewness-0.62.50.2Kurtosis0.79.5-0.3Control value37.765.9453.4 The statistical summary of activity concentration of different radionuclides (238U, 232Th, and 40K). The control value refers to all values from S1C (control sample). Concentrations of 238U exceed the global average in approximately 76% of the samples, while 40K surpasses the worldwide mean in 88% of the samples. Notably, 96% analyzed samples showed 232Th levels above the corresponding global reference value. Comparison with the non-agricultural control soil (S1C) indicates higher 238U and 232Th activities in the control sample, whereas 40K was more abundant in the cultivated soils. Overall, 80% and 92% of the 238U and 232Th activity concentrations in agricultural soil samples were below the control values, respectively, while 88% exhibited elevated 40K activity concentrations relative to the control. In the study region, farmers primarily apply urea, di-ammonium phosphate (DAP), and NPK fertilizers. Urea and DAP contain low levels of NORs, whereas NPK contributes higher 40K due to its potassium content65. The elevated activities of 238U and 232Th are mainly governed by the natural geochemical composition and mineralogical characteristics of the soil, whereas the enhanced 40K levels in agricultural fields can be largely attributed to the routine application of potassium-rich fertilizers, particularly NPK formulations66. The resulting spatial visualizations for 238U, 232Th, and 40K are presented in Fig. 2a–c, respectively.Fig. 2Contour maps (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) illustrating the spatial variability of 238U, 232Th, and 40K concentrations across the sampled soil locations. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). Contour maps (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) illustrating the spatial variability of 238U, 232Th, and 40K concentrations across the sampled soil locations. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). In Fig. 2a–c, the spatial distributions of 238U, 232Th, and 40K exhibit overlapping regions of moderate enrichment, suggesting concurrent occurrence within the soil matrix. The overlapping regions may be attributed to the following factors: 1. Geogenic control: Alluvial parent materials containing U-, Th-, and K-bearing minerals govern the baseline concentrations of 238U, 232Th, and 40K in soil. 2. Weathering and pedogenic processes: Physical and chemical weathering, sedimentation, mineral alteration, leaching, and groundwater movement influence radionuclide redistribution and retention within the soil profile. 3. Agricultural inputs: Intensive application of phosphate, potassium, and compound fertilizers may introduce trace radionuclides, potentially enhancing natural levels. 4. Anthropogenic influences: Urban or industrial inputs (e.g., sewage sludge, waste disposal, and roadside samples) may cause localized enrichment zones22,30,34,66–68. Physicochemical attributes The physicochemical properties of soil strongly influence the speciation, distribution, and mobility of radionuclides and PTEs. Statistical metrics associated with soil pH, EC, TDS, TOC, and the concentrations of essential macronutrients (N, P, K) are given in Table 4. Soil pH spans from mildly acidic (6.3) to distinctly alkaline (9.3), with a predominantly alkaline profile, a mean pH of 7.6 ± 0.6, and RSD of 7.7%. Approximately 92% of samples, including the control sample, are alkaline. These findings are consistent with the general soil conditions in Punjab, where the pH commonly ranges from 6.5 to 8.5; ~ 40% of cultivated soils fall within the range of 6.5–7.5, and ~ 54% within 7.5–8.511. EC is a primary index of soil salinity, reflecting the increased charge conduction resulting from higher concentrations of dissolved ions. EC values range from 106 to 691 μS cm-1, yielding a mean of 290.2 ± 133.5 μS cm-1. The dataset exhibits a relatively high RSD of 46%. TDS concentrations fluctuate between 53 and 345 ppm, with a mean of 145.1 ± 66.6 ppm. The calculated RSD of 45.9% indicates considerable variability within the measurements. The mean EC and TDS levels in the agricultural soils are markedly higher than those at the control site, showing 2.4-fold and 2.3-fold increases, respectively.Table 4Statistical summary of soil physicochemical parameters (pH, EC, TDS, TOC) and macronutrients (N, P, K).Statistical parameterpHEC (μS cm-1)TDS (ppm)TOC (%)N (%)P (%)K (%)Min6.3106530.10.040.041.26Max9.36913451.10.10.22.37Avg7.6290.2145.10.60.080.091.76SD0.6133.566.60.30.030.040.29RSD%7.74645.94740.243.316.7Skewness0.41.21.20.20.41.80.2Kurtosis2.11.91.9-0.9-0.64.4-0.3Control value8.4123620.2BDL0.061.43 Table 4Statistical summary of soil physicochemical parameters (pH, EC, TDS, TOC) and macronutrients (N, P, K).Statistical parameterpHEC (μS cm-1)TDS (ppm)TOC (%)N (%)P (%)K (%)Min6.3106530.10.040.041.26Max9.36913451.10.10.22.37Avg7.6290.2145.10.60.080.091.76SD0.6133.566.60.30.030.040.29RSD%7.74645.94740.243.316.7Skewness0.41.21.20.20.41.80.2Kurtosis2.11.91.9-0.9-0.64.4-0.3Control value8.4123620.2BDL0.061.43 Statistical summary of soil physicochemical parameters (pH, EC, TDS, TOC) and macronutrients (N, P, K). Integrated nutrient management, which combines balanced mineral fertilizers with organic amendments, corrects N, P, and K deficiencies while enhancing nutrient cycling, bioavailability, and soil organic carbon, and is more effective than mineral fertilizers alone in restoring soil health and sustaining crop productivity69. In the agricultural soils, total organic carbon (TOC) ranged from 0.1% to 1.1% (mean = 0.6 ± 0.3%; RSD = 47%), representing a ~ threefold increase relative to the control site (0.2%). Nitrogen content ranged from 0.04% to 0.1% (mean = 0.08 ± 0.03%; RSD = 40.2%), phosphorus from 0.04% to 0.2% (mean = 0.09 ± 0.04%; RSD = 43.3%), and potassium from 1.26% to 2.37% (mean = 1.76 ± 0.29%; RSD = 16.7%). In the control soils, N was found below detection, while P (0.06%) and K (1.43%) were lower than in farming soil. The enrichment of TOC and macronutrients in agricultural soil is consistent with the accumulation of K+ and NO3¯, carbonates, and fine particulates commonly associated with fertilizer inputs, irrigation, higher clay content, and soil disturbance from tillage and land preparation. Potentially toxic element content, associated pollution, and health risk In recent years, anthropogenic activities, particularly industrial and agricultural practices, have elevated PTE levels beyond acceptable limits. Therefore, a precise assessment of PTE concentrations in representative soil samples was conducted using ICP-MS to evaluate contamination and identify its potential sources. PTE levels and spatial distributions The interpolated contour surfaces representing the geospatial concentration patterns of various PTEs are provided in Fig. 3a–i. Figure 3 depicts that Cu and Cd exhibit distinctly divergent spatial patterns, suggesting the presence of separate contamination domains. In contrast, Cr, Fe, Co, Ni, and Zn display closely aligned distribution trends, implying shared contamination sources that may arise from both anthropogenic activities and natural geogenic processes. Similar to NORs, the co-contamination regions associated with PTEs reflect the combined effects of (1) geogenic control from alluvial parent materials containing metal-bearing minerals, (2) weathering and pedogenic processes governing element redistribution and retention, (3) agricultural inputs introducing trace elements due to phosphate and compound fertilizers, and (4) anthropogenic activities (e.g., sewage sludge, waste disposal, and roadside emissions) causing localized enrichment11,30,59,63,70.Fig. 3Interpolated contour maps (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) depicting the concentration patterns of Cr, Fe, Co, Ni, Cu, Zn, As, Cd, and Pb, respectively, of the study region. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). Interpolated contour maps (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) depicting the concentration patterns of Cr, Fe, Co, Ni, Cu, Zn, As, Cd, and Pb, respectively, of the study region. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). The fundamental statistical parameters describing the concentration data profile (in ppm) for various elements are compiled in Table 5. The average concentrations (in ppm) of the analyzed elements, follow a decreasing sequence as follows: Fe (29,148) > > Zn (67.4) > Cr (55.7) > Ni (25.5) > Cu (23.4) > Pb (18.6) > Th (13.9) > Co (8.8) > As (6.5) > U (2.8) > Cd (0.17). This hierarchy reflects the pronounced enrichment of Fe relative to the other elements, whereas Cd is present only at trace levels. The mean concentrations of all analyzed elements in agricultural soils are elevated relative to the control sample (S1C), except for As, Th, and U. These elevated concentrations in cultivated soil point to combined geogenic and anthropogenic inputs.Table 5Principal statistical descriptors for the concentrations (ppm) of 11 analyzed PTEs.Statistical parametersCrFeCoNiCuZnAsCdPbThUMin29.917,1004.813.214.438.54.00.0814.110.82.2Max81.547,96014.743.050.597.111.20.3727.322.03.2Avg55.729,1488.825.523.467.46.50.1718.613.92.8SD11.669572.36.58.815.11.60.063.12.10.3RSD%20.823.926.725.637.522.424.032.516.714.98.9Skewness0.10.80.60.71.70.41.11.71.22.5-0.6Kurtosis0.11.00.41.03.0− 0.32.44.91.99.50.7Control value46.425,1007.720.719.347.96.80.1116.616.23.1Control value refers to elemental concentration in control sample (S1C). Table 5Principal statistical descriptors for the concentrations (ppm) of 11 analyzed PTEs.Statistical parametersCrFeCoNiCuZnAsCdPbThUMin29.917,1004.813.214.438.54.00.0814.110.82.2Max81.547,96014.743.050.597.111.20.3727.322.03.2Avg55.729,1488.825.523.467.46.50.1718.613.92.8SD11.669572.36.58.815.11.60.063.12.10.3RSD%20.823.926.725.637.522.424.032.516.714.98.9Skewness0.10.80.60.71.70.41.11.71.22.5-0.6Kurtosis0.11.00.41.03.0− 0.32.44.91.99.50.7Control value46.425,1007.720.719.347.96.80.1116.616.23.1Control value refers to elemental concentration in control sample (S1C). Principal statistical descriptors for the concentrations (ppm) of 11 analyzed PTEs. Control value refers to elemental concentration in control sample (S1C). PTE pollution indices The extent of PTE contamination was evaluated using several geochemical and ecological indices, including the contamination factor (CF), geoaccumulation index (Igeo), enrichment factor (EF), pollution load index (PLI), ecological contamination index (Ei), and ecological risk index (ERI). Figure 4 shows heat-map distributions of (a) CF, (b) Igeo values, (c) EF, and (d) Ei for all elements and sampling sites. The mean CF values followed the order: Fe (0.8) < Co (0.9) ≈ Cu (0.9) ≈ Pb (0.9) ≈ Zn (0.9) < U (1) < Ni (1.3) ≈ Th (1.3) < Cr (1.6) < Cd (1.8) < As (4.3) (Fig. 4a). These results showcased considerable contamination by As, moderate contamination by Cd, Cr, Th, Ni, and U, and low contamination by the remaining elements. Arsenic exhibited contamination levels ranging from moderate (2.7) to very high (7.5), indicating substantial enrichment, whereas Cd ranged from low (0.8) to considerable (3.8) contamination. Based on the distribution of CF values across sampling locations, most samples showed moderate contamination for Cr (96%), Fe (16%), Co (24%), Ni (84%), Cu (28%), Zn (32%), Pb (24%), Th (100%), and U (56%), while 92% of samples were highly contaminated with As. These contamination patterns highlight the need for long-term environmental monitoring, particularly for As, due to its disproportionately high CF.Fig. 4Spatial heat-map visualizations (prepared using OriginPro 2026, available at https://www.originlab.com/) illustrating (a) contamination factors, (b) geo-accumulation indices, (c) enrichment factors, and (d) ecological risk indices for each PTE across all analyzed soil samples. Spatial heat-map visualizations (prepared using OriginPro 2026, available at https://www.originlab.com/) illustrating (a) contamination factors, (b) geo-accumulation indices, (c) enrichment factors, and (d) ecological risk indices for each PTE across all analyzed soil samples. The Pollution Load Index (PLI), calculated from the geometric mean of the contamination factors, ranged from 0.8 (unpolluted) to 1.83 (degraded) (Fig. 5a). The average PLI (1.24 ± 0.23) reflects generally deteriorated soil conditions and exceeds the value measured at the control site (1.09). Approximately 92% of the agricultural soil samples exhibited PLI values greater than 1, confirming widespread degradation. The corresponding RSD was 18.5%, indicating moderate dispersion. Statistical evaluation yields a skewness coefficient of 0.5, reflecting a slight positive asymmetry, and a kurtosis value of 0.5, suggesting a mildly flatter-than-normal distribution profile.Fig. 5Interpolated spatial-distribution contour surfaces (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) depicting the (a) PLI and (b) ERI. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). Interpolated spatial-distribution contour surfaces (prepared using ArcGIS Pro, version 3.5.1, URL: https://www.esri.com/en-us/arcgis/products/arcgis-pro/) depicting the (a) PLI and (b) ERI. The administrative boundaries are based on Survey of India shapefiles (URL: https://surveyofindia.gov.in/). The average geo-accumulation index (Igeo) values (Fig. 4b) for the investigated potentially toxic elements followed the ascending order: Fe (-0.9) < Co (-0.8) ≈ Cu (-0.8) < Pb (-0.7) ≈ Zn (-0.7) < U (-0.6) < Ni (-0.3) < Th (-0.2) < Cr (0.1) < Cd (0.2) < As (1.5). Based on these values, both Cr and Cd exhibited Igeo classifications indicative of “uncontaminated to moderately contaminated” conditions in approximately 60% and 56% of the samples, respectively. Arsenic exhibited a broad contamination range, with Igeo values from 0.83 to 2.32, corresponding to conditions from “uncontaminated to moderately contaminated” (8%) to “moderately contaminated” (92%). The mean Igeo value of As indicates overall moderate contamination. The mean EF values (Fig. 4c) increased in the following sequence: Fe (1) ≈ Co (1) < Cu (1.1) ≈ Pb (1.1) < Zn (1.2) < U (1.3) < Ni (1.5) < Th (1.6) < Cr (1.9) < Cd (2.2) < As (5.2). These results suggest that mild anthropogenic inputs are influencing the enrichment of Ni, Th, Cr, Cd, and As. Arsenic exhibits the highest enrichment, with 32% of samples showing moderate (min = 4) and 68% showing moderately severe enrichment (max = 5.9), indicating substantial enrichment. In contrast, Cd ranges from minor (min = 1.2) to moderate (max = 4) enrichment. Based on the spatial distribution of enrichment factors, most samples exhibited minor enrichment for Cr (100%), Co (68%), Ni (100%), Cu (56%), Zn (84%), Pb (96%), Cd (88%), Th (100%), and U (88%), while the remaining samples showed background levels. Most PTEs exhibited ecological risk factor (Ei) values (Fig. 4d) below 40, corresponding to a low-risk classification. An Ei could not be assigned for Th because no chemotoxic-response coefficient is available in the published literature. The mean Ei values followed the ascending order: Fe (0.8) < Zn (0.9) < Cr (3.2) < Co (4.4) < Pb (4.6) < Cu (4.7) < Ni (6.4) < U (40.1) < As (43.2) < Cd (53.5). Based on the soil quality, As (56%), Cd (80%), and U (52%) in soil samples showed “fairly” Ei levels, while in a few samples (8%) Cd showcased a “considerable” toxic level, indicating significant ecological concern, whereas the remaining elements indicated low Ei levels. Overall, the mean Ei profile indicates that U, As, and Cd constitute the principal contributors to soil contamination within the study area. Additionally, this also indicates that U can pose both chemical and radiological contamination. The ecological risk index (ERI) calculated from the Ei ranged from 101 to 236 (Fig. 5b), indicating a transition from low to moderate risk, with a mean value of 162 ± 29 and an overall classification of “moderate” ecological risk. U, As, and Cd are the predominant contributors, showing higher ecological impact scores than the other PTEs. The dataset shows moderate variability (RSD = 17.8%), slight positive skewness (0.6), and low kurtosis (1.2), indicating a mildly right-skewed and relatively flat distribution. Health risks due to PTEs Non-carcinogenic risk Human-health risks associated with soilborne PTEs were quantified using a multipathway exposure model that converts measured concentrations into estimated internal doses. Agricultural inputs, particularly mineral fertilizers, livestock wastes, and pesticides, represent major anthropogenic sources of PTEs to soil, water, and air. Their mobility and environmental persistence may compromise ecosystem quality and elevate human exposure levels. Soil exhibiting elevated PTE burdens, therefore, poses health risks to individuals working on or residing in proximity to affected farmland. The calculated hazard quotient (HQ) and hazard index (HI) values are summarized in Table 6.Table 6HQ and HI metrics associated with trace element exposure.Potentially toxic elementsHQingHQdermHQinhHazard Index (HI)As1.27 × 10–021.23 × 10–044.55 × 10–061.28 × 10–02Cd1.03 × 10–044.09 × 10–051.51 × 10–061.45 × 10–04Co2.57 × 10–041.28 × 10–061.32 × 10–043.91 × 10–04Cr1.09 × 10–022.17 × 10–031.68 × 10–041.32 × 10–02Cu3.43 × 10–044.56 × 10–065.02 × 10–083.48 × 10–04Fe2.44 × 10–02––2.44 × 10–02Ni7.47 × 10–041.10 × 10–051.07 × 10–077.59 × 10–04Pb3.12 × 10–038.29 × 10–054.56 × 10–073.20 × 10–03Zn1.32 × 10–042.63 × 10–061.94 × 10–081.34 × 10–04ΣHQ5.2710–022.44 × 10–033.07 × 10–04ΣHI5.54 × 10–02 Table 6HQ and HI metrics associated with trace element exposure.Potentially toxic elementsHQingHQdermHQinhHazard Index (HI)As1.27 × 10–021.23 × 10–044.55 × 10–061.28 × 10–02Cd1.03 × 10–044.09 × 10–051.51 × 10–061.45 × 10–04Co2.57 × 10–041.28 × 10–061.32 × 10–043.91 × 10–04Cr1.09 × 10–022.17 × 10–031.68 × 10–041.32 × 10–02Cu3.43 × 10–044.56 × 10–065.02 × 10–083.48 × 10–04Fe2.44 × 10–02––2.44 × 10–02Ni7.47 × 10–041.10 × 10–051.07 × 10–077.59 × 10–04Pb3.12 × 10–038.29 × 10–054.56 × 10–073.20 × 10–03Zn1.32 × 10–042.63 × 10–061.94 × 10–081.34 × 10–04ΣHQ5.2710–022.44 × 10–033.07 × 10–04ΣHI5.54 × 10–02 HQ and HI metrics associated with trace element exposure. Across exposure routes, the cumulative HQ followed the order ingestion > dermal contact > inhalation, indicating that oral intake is the dominant exposure pathway, with minimal contribution from airborne uptake. For all elements, both individual HQs and the overall HI were below the threshold level of 1, indicating no appreciable non-carcinogenic risk. The relative contribution of individual elements to the overall HI is showcased in Fig. 6, which shows Fe as the predominant shareholder, accounting for ~ 44.1% of the cumulative HI. Chromium and As also made substantial contributions, accounting for approximately 23.8% and 23.1%, respectively. The HIs follow the order: Fe > Cr > As > Pb > Ni > Co > Cu > Cd > Zn (Table 6). The cumulative HI values are well below 1, suggesting that any non-carcinogenic health effects are negligible. In general, no significant health risk was evident from either individual or combined exposure to PTEs. As only the studied elements were assessed, inclusion of other probable PTEs in future investigations is recommended.Fig. 6Proportional influence of individual elements on the overall hazard index (HI) for general populations. Proportional influence of individual elements on the overall hazard index (HI) for general populations. Carcinogenic risk Lifetime carcinogenic risks associated with As, Cd, Cr, Ni, and Pb in the farming soils, considering oral intake, inhalation of resuspended particles, and dermal absorption, were quantified in this study, and the resulting values are presented in Table 7. The table also summarizes the mean cancer risk (CR) due to PTEs in soils from cultivated fields. According to U.S. EPA guidance, both individual carcinogenic risk (CR) and cumulative carcinogenic risk (TCR) are regarded as negligible when they fall below 1 × 10–6, whereas values greater than 1 × 10–4 are interpreted as posing a potential threat to human health56,71. Human exposure to hazardous trace elements such as As, Cr, and Ni results in cancer risks within the acceptable range (1 × 10–6 to 1 × 10–4), indicating a potential but tolerable probability of carcinogenic effects.Table 7Lifetime carcinogenic risks associated with trace element exposure.Potentially toxic elementsIngestion risk CRingDermal risk CRdermInhalation risk CRinhCarcinogenic risk (CR)As5.70 × 10–065.55 × 10–088.44 × 10–105.76 × 10–06Cd6.25 × 10–07–9.50 × 10–116.25 × 10–07Cr1.63 × 10–052.61 × 10–062.02 × 10–071.92 × 10–05Ni2.54 × 10–052.53 × 10–061.85 × 10–092.79 × 10–05Pb9.27 × 10–081.83 × 10–09–9.46 × 10–08 Table 7Lifetime carcinogenic risks associated with trace element exposure.Potentially toxic elementsIngestion risk CRingDermal risk CRdermInhalation risk CRinhCarcinogenic risk (CR)As5.70 × 10–065.55 × 10–088.44 × 10–105.76 × 10–06Cd6.25 × 10–07–9.50 × 10–116.25 × 10–07Cr1.63 × 10–052.61 × 10–062.02 × 10–071.92 × 10–05Ni2.54 × 10–052.53 × 10–061.85 × 10–092.79 × 10–05Pb9.27 × 10–081.83 × 10–09–9.46 × 10–08 Lifetime carcinogenic risks associated with trace element exposure. The assessment of total cancer risk (TCR) for the investigated elements yields values of 5.76 × 10–6 for As, 6.25 × 10–7 for Cd, 1.92 × 10–5 for Cr, 2.79 × 10–5 for Ni, and 9.46 × 10–8 for Pb. These results indicate that Ni and Cr are the predominant contributors to the overall carcinogenic burden, with moderate TCR values in the order of 10–5. Lead exhibits the lowest estimated cancer risk within the group. When evaluated in terms of relative contribution to total carcinogenic risk, the elements follow the order: Ni > Cr > As > Cd > Pb. Findings from this investigation demonstrate that, within SAS Nagar, estimated carcinogenic risks for adults associated with intake of PTEs via various pathways fall below levels of concern, indicating an absence of appreciable cancer-related health impacts. Also, from the data presented for the studied PTEs in Table 7, it is evident that CR follows the same descending order of exposure routes as NCR, with the highest contribution from oral exposure, followed by dermal absorption, and the lowest from inhalation. Indian and global comparative scenario of NORs and PTEs: Table 8 compares the concentrations of PTEs (in ppm) and NORs (in Bq kg-1) in the current study with reported values from different Indian and global regions, as well as with baseline levels for Indian soils and relevant regulatory limits. In the present investigation, the mean concentrations of Cr, Co, Ni, Cu, Zn, and As are substantially higher than those reported by Sonkar et al.39, whereas those of Cd and Pb are lower. These differences may reflect variations in sampling periods (as Sonkar et al.39 collected samples in 2018, and elemental inputs may have changed since then), differences in land-use types (the current study is restricted to agricultural soils, whereas theirs included agricultural, urban, and suburban sites), different sampling locations, and possible discrepancies in analytical methods. Concentrations of Pb and Zn in the present study exceed the established baseline levels reported for Indian soils72. The mean concentration of Zn was approximately three times higher than the Indian background levels. Additionally, Cr levels were nearly five times higher than the permissible limits recommended by the United States Environmental Protection Agency (USEPA)71, and Zn levels also surpassed the maximum allowable threshold suggested by WHO/FAO73. Comparison with reported studies from India, including those from regions near the present study area and global literature, indicates that Cr, Co, Cu, and Pb are among the most frequently investigated elements. Recent studies have also examined radionuclides and trace elements together to assess the combined environmental and health risks associated with NORs and PTEs. Both the literature and the present study commonly report Zn and Pb concentrations surpassing the Indian background values, while Cr often surpasses USEPA limits. In several cases, Zn, Cd, and Pb have also been reported to exceed WHO/FAO guideline values.Table 8Comparative evaluation of soil PTE concentrations (ppm) and radionuclides (Bq kg-1) in the current study relative to reported values from Indian and global regions, baseline levels for Indian soils, and relevant regulatory limits. * Indicates agricultural soil.Study area (Indian region)CrFeCoNiCuZnAsCdPb238U/226Ra232Th40KReference*SAS Nagar (Punjab)55.729,1488.825.523.467.46.50.1718.634.756.5556.8Present Study*Bathinda(Punjab)47.02–13.8819.85–––1.3619.69–––74SAS Nagar (Punjab)5.28–1.946.515.1432.692.740.2890.02––39*Ropar (Punjab)65.02 ± 16.39–9.08 ± 2.48–17.74 ± 4.458.00 ± 13.659.58 ± 3.080.31 ± 0.1927.58 ± 6.8940.0764.68596.7411Along the Satluj River (Punjab)28.9145517.0328.426.355.91.182.4236.8––75*Ferozepur (Punjab)10.11 ± 2.016055 ± 11563.40 ± 0.8417.50 ± 0.9621.82 ± 3.05102.42 ± 10.8830.38 ± 2.050.75 ± 0.1211.67 ± 0.8918.65 ± 3.9576Ludhiana (Punjab)54.84–9.72–33.43–35.69––––77*Fatehgarh Sahib (Punjab)24.1490149.48–16.5526.871.63–7.89.39–78*Amritsar (Punjab)36.92 ± 0.04–––42.32 ± 0.0478.93 ± 0.06––7.49 ± 0.02––79Noida and Greater Noida (Delhi)0.064–0.0370.0390.067–––0.1216 ± 324 ± 7321 ± 5368Jammu, Kashmir, and Ladakh16.930,309.313.246.124.655–0.610.531.1534.07599.1180Una, Hamirpur, and Kangra (Himachal Pradesh)25.87–30.9632.8434.0666.00––63.28680.166.05777.5722*Nalagarh Valley (Himachal Pradesh)12.7 ± 4.53819 ± 1517–18.3 ± 6.94.6 ± 2.226 ± 100.6 ± 0.20.3 ± 0.110.6 ± 3.3––81Global study area (Country)CrFeCoNiCuZnAsCdPb238U/226Ra232Th40KReferenceMalatya (Turkey)26 ± 27233 ± 2484 ± 135 ± 26 ± 1––––23.7 ± 0.622.4 ± 0.5450 ± 782*Jieyang City (China)26.0810.2111.2261.139.600.0940.76–––59Majdanpek region (Serbia)87.1–19.335.33455289.627.441.4362–––83*Gonabad(Iran)22.5519,683.66.96834.23429.26354.482–0.10213.617–––49Mamuju (Indonesia)84 ± 4––41 ± 271 ± 4304 ± 15–0.69 ± 0.14303 ± 18784100877034*Puning (China)24.76––11.5910.6357.277.200.0744.26–––70Ile-Ife (Nigeria)42.81 ± 3.00––23.93 ± 2.51–33.66 ± 2.71–58.26 ± 3.2572.93 ± 4.6011.93 ± 4.68185.48 ± 73.31259.23 ± 84.2084Severodvinsk (Russia)19.7364006.899.717.5924.9812.600.1910.0111.98.7191.385*Nile Valley (Egypt)–48,600––52.6517.90–0.5917.2715.414.8196.367*Figueira (Brazil)33 ± 13––12 ± 6.214 ± 1433 ± 226.8 ± 4.50.4 ± 0.28.8 ± 5.224.7 ± 8.6––86*Poços de Caldas (Brazil)28 ± 30––11 ± 1316 ± 2095 ± 4611 ± 9.22.8 ± 357 ± 5969.2 ± 61.8––86*Aghili plain (Iran)39.57–8.0958.6618.3943.092.770.306.12–––87Toplica region (Serbia)100.3–19.4117.839.9110.7170.1247.329.936.649288Indian Bkg11432,01515.227.756.522.1––13.1––72Permissible limits11–––2701100–0.48200–––USEPA7110050,00050–10050200.3020–––WHO/FAO73 Table 8Comparative evaluation of soil PTE concentrations (ppm) and radionuclides (Bq kg-1) in the current study relative to reported values from Indian and global regions, baseline levels for Indian soils, and relevant regulatory limits. * Indicates agricultural soil.Study area (Indian region)CrFeCoNiCuZnAsCdPb238U/226Ra232Th40KReference*SAS Nagar (Punjab)55.729,1488.825.523.467.46.50.1718.634.756.5556.8Present Study*Bathinda(Punjab)47.02–13.8819.85–––1.3619.69–––74SAS Nagar (Punjab)5.28–1.946.515.1432.692.740.2890.02––39*Ropar (Punjab)65.02 ± 16.39–9.08 ± 2.48–17.74 ± 4.458.00 ± 13.659.58 ± 3.080.31 ± 0.1927.58 ± 6.8940.0764.68596.7411Along the Satluj River (Punjab)28.9145517.0328.426.355.91.182.4236.8––75*Ferozepur (Punjab)10.11 ± 2.016055 ± 11563.40 ± 0.8417.50 ± 0.9621.82 ± 3.05102.42 ± 10.8830.38 ± 2.050.75 ± 0.1211.67 ± 0.8918.65 ± 3.9576Ludhiana (Punjab)54.84–9.72–33.43–35.69––––77*Fatehgarh Sahib (Punjab)24.1490149.48–16.5526.871.63–7.89.39–78*Amritsar (Punjab)36.92 ± 0.04–––42.32 ± 0.0478.93 ± 0.06––7.49 ± 0.02––79Noida and Greater Noida (Delhi)0.064–0.0370.0390.067–––0.1216 ± 324 ± 7321 ± 5368Jammu, Kashmir, and Ladakh16.930,309.313.246.124.655–0.610.531.1534.07599.1180Una, Hamirpur, and Kangra (Himachal Pradesh)25.87–30.9632.8434.0666.00––63.28680.166.05777.5722*Nalagarh Valley (Himachal Pradesh)12.7 ± 4.53819 ± 1517–18.3 ± 6.94.6 ± 2.226 ± 100.6 ± 0.20.3 ± 0.110.6 ± 3.3––81Global study area (Country)CrFeCoNiCuZnAsCdPb238U/226Ra232Th40KReferenceMalatya (Turkey)26 ± 27233 ± 2484 ± 135 ± 26 ± 1––––23.7 ± 0.622.4 ± 0.5450 ± 782*Jieyang City (China)26.0810.2111.2261.139.600.0940.76–––59Majdanpek region (Serbia)87.1–19.335.33455289.627.441.4362–––83*Gonabad(Iran)22.5519,683.66.96834.23429.26354.482–0.10213.617–––49Mamuju (Indonesia)84 ± 4––41 ± 271 ± 4304 ± 15–0.69 ± 0.14303 ± 18784100877034*Puning (China)24.76––11.5910.6357.277.200.0744.26–––70Ile-Ife (Nigeria)42.81 ± 3.00––23.93 ± 2.51–33.66 ± 2.71–58.26 ± 3.2572.93 ± 4.6011.93 ± 4.68185.48 ± 73.31259.23 ± 84.2084Severodvinsk (Russia)19.7364006.899.717.5924.9812.600.1910.0111.98.7191.385*Nile Valley (Egypt)–48,600––52.6517.90–0.5917.2715.414.8196.367*Figueira (Brazil)33 ± 13––12 ± 6.214 ± 1433 ± 226.8 ± 4.50.4 ± 0.28.8 ± 5.224.7 ± 8.6––86*Poços de Caldas (Brazil)28 ± 30––11 ± 1316 ± 2095 ± 4611 ± 9.22.8 ± 357 ± 5969.2 ± 61.8––86*Aghili plain (Iran)39.57–8.0958.6618.3943.092.770.306.12–––87Toplica region (Serbia)100.3–19.4117.839.9110.7170.1247.329.936.649288Indian Bkg11432,01515.227.756.522.1––13.1––72Permissible limits11–––2701100–0.48200–––USEPA7110050,00050–10050200.3020–––WHO/FAO73 Comparative evaluation of soil PTE concentrations (ppm) and radionuclides (Bq kg-1) in the current study relative to reported values from Indian and global regions, baseline levels for Indian soils, and relevant regulatory limits. * Indicates agricultural soil. *Bathinda (Punjab) *Gonabad (Iran) Reported literature further suggests that soils with elevated Pb concentrations may also exhibit higher levels of 238U/226Ra or 232Th, as several Pb isotopes are produced as intermediate decay products in these decay series. For example, 214Pb (half-life of ~ 26.8 min) and 210Pb (half-life of ~ 22.3 years) originate from the 238U decay chain, while 212Pb (half-life ~ 10.6 h) is part of the 232Th decay series. These decay chains of 238U and 232Th ultimately terminate in stable isotopes, mainly 206Pb and 208Pb, respectively34. However, Pb accumulation in soils can also arise from anthropogenic sources; therefore, the relationship between Pb concentrations and U/Th levels should be interpreted cautiously. Statistical analysis Spearman correlation analysis A correlation analysis was carried out to assess associations among constituents of the agricultural soil samples (Fig. 7). Since ~ 39% of the variables were non-normally distributed, Spearman’s rank correlation was applied to radionuclides, PTEs, physicochemical indicators, and micro-nutrients. Overall, 79.7% of variable pairs show significant correlations (p ≤ 0.05–0.001), ranging from moderate to extremely strong. Moderate positive correlations (ρ = 0.41–0.59) account for 27.5% of pairs, strong correlations (ρ = 0.6–0.74) for 30.7%, very strong correlations (ρ = 0.75–0.89) for 16.3%, and extremely strong correlations (ρ = 0.9–1) for 4.6%, all significant at p ≤ 0.01 or p ≤ 0.001.Fig. 7Spearman correlations among the studied variables, showing correlation coefficients and significance levels. Spearman correlations among the studied variables, showing correlation coefficients and significance levels. Strong inter-element correlations were observed among 40K, Cr, Fe, Co, Ni, Cu, Zn, As, and Pb, indicating that these radionuclides and trace elements co-vary under similar geochemical or environmental controls. Exceptionally strong positive correlations are observed among several element pairs (ρ ≥ 0.90, p ≤ 0.001). 40K shows an especially strong association with Fe (ρ = 0.93), which suggests interaction between potassium-bearing minerals and Fe-rich matrices, with possible enhancement from K-based fertilizers in cultivated soils. Fe is similarly correlated with Co (ρ = 0.98), Ni (ρ = 0.9), and Pb (ρ = 0.92). Thus, Fe oxides likely function as major geochemical scavengers, controlling the mobility and accumulation of Co, Ni, and Pb through adsorption and co-precipitation mechanisms89. Co and Ni are likewise strongly interrelated (ρ = 0.92). These constituents also show notable associations with several physicochemical properties and nutrient fractions. Physicochemical variables display very strong to moderate correlations- EC and TDS (ρ = 1), TOC and N (ρ = 0.95), whereas pH and P show no statistically strong relationships with the other measured parameters. Overall, the correlation structure reflects predominantly diffuse, matrix-controlled accumulation rather than discrete point-source contamination, a pattern widely observed in agrarian soils90. Principal component analysis Soil contamination by PTEs and radionuclides results from both natural processes and human-made activities. Natural factors include the composition of parent rocks, soil characteristics, geological setting, landscape features, and weathering. Human-made contributions primarily originate from land-use changes, industrial outputs, and vehicular emissions91. PCA was employed to assess associations between the concentration of NORs and PTEs as well as physicochemical parameters in surface agricultural soils. The principal components were classified based on their factor loadings into components influenced by both natural processes and anthropogenic (like fertilizers and pesticides) inputs, and components predominantly governed by natural soil-forming processes, although exclusively natural control is unlikely in managed agricultural systems. In each case, classification was based on the process exerting the greatest influence on the associated elements. PCA revealed that the first five principal components collectively explain 90.1% of the total data variability, with all five components having eigenvalues greater than 1. This pattern of explained variance indicates that the first principal component primarily represents the major structural trends in the dataset (Table 9). PCA revealed that the first three principal components collectively explained 78.2% of the total data variability and hence, represent dominant factors controlling the distribution of NORs, PTEs, and various soil properties, as showcased in the biplot of Fig. 8.Table 9Principal component loading coefficients and the percentage of total variance explained by each component.ParametersPC1PC2PC3PC4PC5238U0.2180.0370.3880.2090.269232Th0.1590.0350.356− 0.3880.51840K0.279− 0.1070.088− 0.028− 0.168Cr0.276− 0.086− 0.0160.103− 0.225Fe0.295− 0.1950.021− 0.035− 0.138Co0.296− 0.1920.0020.017− 0.147Ni0.296− 0.0970.0220.082− 0.226Cu0.2290.099− 0.418− 0.0990.052Zn0.2820.1260.1220.109− 0.234As0.257− 0.324− 0.004− 0.171− 0.017Cd0.1540.2050.2730.3660.225Pb0.28− 0.1520.065− 0.157− 0.041pH0.093− 0.322− 0.0430.6030.354EC0.2190.17− 0.4580.080.245TDS0.2180.171− 0.4590.0770.246TOC0.2230.4060.056− 0.1820.095N0.2380.3550.082− 0.21− 0.03P0.00020.4960.1160.35− 0.351Eigenvalues10.082.241.741.131.02Variance (%)5612.59.76.35.6Cumulative (%)5668.578.284.590.1Fig. 8PCA biplot depicting the interrelationships among radionuclide concentrations, PTE levels, physicochemical parameters, and nutrient variables, as represented by their principal component linear combinations. Table 9Principal component loading coefficients and the percentage of total variance explained by each component.ParametersPC1PC2PC3PC4PC5238U0.2180.0370.3880.2090.269232Th0.1590.0350.356− 0.3880.51840K0.279− 0.1070.088− 0.028− 0.168Cr0.276− 0.086− 0.0160.103− 0.225Fe0.295− 0.1950.021− 0.035− 0.138Co0.296− 0.1920.0020.017− 0.147Ni0.296− 0.0970.0220.082− 0.226Cu0.2290.099− 0.418− 0.0990.052Zn0.2820.1260.1220.109− 0.234As0.257− 0.324− 0.004− 0.171− 0.017Cd0.1540.2050.2730.3660.225Pb0.28− 0.1520.065− 0.157− 0.041pH0.093− 0.322− 0.0430.6030.354EC0.2190.17− 0.4580.080.245TDS0.2180.171− 0.4590.0770.246TOC0.2230.4060.056− 0.1820.095N0.2380.3550.082− 0.21− 0.03P0.00020.4960.1160.35− 0.351Eigenvalues10.082.241.741.131.02Variance (%)5612.59.76.35.6Cumulative (%)5668.578.284.590.1 Principal component loading coefficients and the percentage of total variance explained by each component. PCA biplot depicting the interrelationships among radionuclide concentrations, PTE levels, physicochemical parameters, and nutrient variables, as represented by their principal component linear combinations. The first principal component (PC1) represented the dominant factor, accounting for ~ 56% of the total variability in the analyzed parameters. All parameters associated with PC1 showed positive loadings (Table 9), with relatively uniform weak to moderate values (0.2–0.3) for 40K, Cr, Fe, Co, Ni, Cu, Zn, As, Pb, EC, TDS, TOC, and N, indicating a similar directional influence as showcased in Fig. 8. Such a distribution suggests that these variables jointly influence this component, reflecting a mixed contribution from multiple environmental factors. In addition to natural geological sources related to lithogenic-mineralogical composition, PC1 may also reflect anthropogenic influences, including the application of potassium-rich fertilizers and agrochemicals containing PTEs, industrial impacts from waste disposal and effluents, irrigation-induced salinity, and organic matter complexation. Additionally, PC2 explained ~ 12.5% of the total variance and exhibited moderate loadings (0.3–0.5) for As (-0.324), pH (-0.322), TOC (0.406), N (0.355), and P (0.496). PC2 may primarily reflect human-made activities related to agricultural inputs affecting soil fertility, particularly fertilizer application and soil nutrient management practices. PC3 explained ~ 9.7% of the total variance and showed moderate to relatively high loadings for 238U (0.388), 232Th (0.356), Cu (-0.418), EC (-0.458), and TDS (-0.459), whereas Cd (0.273) exhibited a weak to moderate loading, suggesting a geochemical influence on radionuclides, PTE, and dissolved solids in the soil. The moderate positive loadings of U, Th, and Cd, aligned in the same direction in Fig. 8, indicate that PC3 likely reflects geogenic influences related to parent-rock composition, regional geology, and topographic characteristics. PC4 explained ~ 6.3% of the total variance and exhibited moderate to strong loadings for 232Th (-0.388), Cd (0.366), pH (0.603), and P (0.35), suggesting that soil chemical conditions regulated by pH-dependent elemental behavior and nutrient inputs may control the distribution of NORs and PTEs in the soil. PC5 explained ~ 5.6% of the total variance and exhibited moderate to strong loadings for 232Th (0.518), pH (0.354), and P (-0.351), indicating that variations in soil pH and phosphorus availability may influence the distribution of radionuclides in the soil. The multi-component PCA structure highlights that soil quality in the study area is governed by both natural parent material and anthropogenic agricultural practices, reflecting the coexistence of a stable geogenic background and dynamic fractions sensitive to land management. Hierarchical cluster analysis Hierarchical cluster analysis (HCA) is a multivariate technique that organizes variables into nested groups based on similarity or distance metrics. The resulting dendrogram depicts the HCA-derived structural relationships among the various variables (Fig. 9).Fig. 9Dendrogram obtained from hierarchical relationships among variables in the agrarian soil samples. Dendrogram obtained from hierarchical relationships among variables in the agrarian soil samples. HCA of the agricultural soil dataset resolved around three distinct geochemical associations reflecting different controlling processes. The first cluster is dominated by 238U and 232Th, with a minor contribution from Cd, indicating enrichment likely primarily associated with geogenic influences related to parent-rock composition, regional geology, and topographic characteristics. The association of Cd is sometimes also consistent with its presence as an impurity in phosphate-based fertilizers commonly applied in cultivated soils30. In addition to natural geogenic sources, the second cluster, which comprised 40K, Fe, Co, Ni, Pb, As, Cr, and Zn, may reflect anthropogenic influences, particularly the application of fertilizers that are potassium-rich or may contain certain PTEs, pesticides, and industrial impacts from waste disposal and effluents. Although agricultural inputs may contribute to some of these elements, their strong association with K- and Fe-bearing minerals indicates that mineralogical composition, adsorption, and incorporation into clay minerals and iron oxides largely govern their distribution, with cultivation and irrigation further enhancing element retention92. The third cluster grouped Cu with EC, TDS, TOC, and N, indicating management-related controls associated with organic inputs, nutrient cycling, irrigation-induced salinity, and metal complexation with organic matter. Copper’s affinity for organic ligands explains its close association with TOC and N, while elevated EC and TDS indicate cumulative effects of fertilization and irrigation. In contrast, pH and phosphorus did not exhibit meaningful correlations with any of the identified clusters, implying that their behavior within the dataset is governed by independent mechanisms. Overall, the clustering highlights the combined influence of pedogenic controls and agricultural management on soil geochemistry. Summary and conclusions This study evaluates NORs, soil physicochemical properties, essential nutrients, and PTEs contamination in agricultural soils of the SAS Nagar district, Punjab, India. It integrates spatial analysis with pollution assessment and human health risk evaluation. Multivariate statistical approaches are applied to identify potential contamination sources. The mean activity concentrations of 238U, 232Th, and 40K were found to be 34.7 ± 3.1 Bq kg-1, 56.5 ± 8.4 Bq kg-1, and 556.8 ± 93.1 Bq kg-1, respectively, with levels all above corresponding global means of 33, 45, and 445 Bq kg-1, respectively. The soils are alkaline (mean pH = 7.6) with substantially higher EC (mean = 290.2 μS cm-1) than control samples (2.4 times), reflecting elevated salinity and dissolved ion content. The concentration of trace PTEs follows a decreasing sequence: Fe (29,148) > > Zn (67.4) > Cr (55.7) > Ni (25.5) > Cu (23.4) > Pb (18.6) > Th (13.9) > Co (8.8) > As (6.5) > U (2.8) > Cd (0.17). Pollution indices identify As and Cd as the principal contaminants, with U and Cr contributing moderately to soil quality deterioration. ~ 92% of soil samples indicate PLI values > 1, indicating widespread soil degradation, while the ecological risk index indicated low to moderate risk, with a mean value of 162 ± 29, classified as moderate ecological risk. Human health risk assessment revealed negligible non-carcinogenic risk (HQ/HI < 1) for all elements; however, Fe was the dominant contributor (~ 44.1% of cumulative HI), followed by Cr (23.8%) and As (23.1%). Total lifetime carcinogenic risk for As, Cd, Cr, Ni, and Pb was 5.76 × 10–6, 6.25 × 10–7, 1.92 × 10–5, 2.79 × 10–5, and 9.46 × 10–8, respectively. The CR values for As, Cr, and Ni fall within the acceptable risk range (10–6–10–4), indicating potential carcinogenic concern, whereas Pb exhibits the lowest risk. The contribution to carcinogenic risk follows the order: Ni > Cr > As > Cd > Pb. The concentration values of PTEs and NORs from the present study were compared with national and global studies and guideline values. The concentrations of Zn and Pb exceeded Indian background levels, with Zn approximately threefold higher, while Cr levels were nearly fivefold above USEPA limits; Zn also surpassed WHO/FAO guidelines. Geospatial distributions through contour mapping show common hotspot zones of moderate enrichment for NORs and PTEs, indicating their co-occurrence in soils driven by geogenic inputs, pedogenic processes, agricultural practices (e.g., phosphate and compound fertilizers), and anthropogenic activities (e.g., sewage sludge, waste disposal, and roadside emissions), resulting in localized enrichment. Spearman correlation indicates that many soil parameters exhibit strong monotonic relationships. PCA showed that the first three components explained a major portion (78.2%) of the total variance. Combined PCA and HCA indicate that 238U and 232Th, with minor Cd contribution, are predominantly geogenic, linked to parent material and regional geology, although Cd may also derive from phosphate fertilizers. Other than geogenic, 40K, Fe, Co, Ni, Pb, As, Cr, and Zn reflect anthropogenic inputs (fertilizers, pesticides, and industrial effluents), while Cu with EC, TDS, TOC, and N indicates management-related controls such as organic inputs, nutrient cycling, salinity, and elemental-organic interactions. Collectively, these findings emphasize the need for targeted soil quality monitoring to safeguard long-term soil quality and public health, considering the combined influence of geogenic and anthropogenic factors and management-sensitive soil fractions. The present work can be extended to include a comprehensive radioecological assessment of soils and associated public health implications beyond PTEs’ impacts. Comparative analysis across different land-use types (e.g., industrial, recreational, and forested areas), along with depth-resolved studies considering crop root zones, would provide deeper insight into radionuclide and PTE distribution. Furthermore, increasing sample size, expanding spatial coverage, and incorporating seasonal and temporal variability of PTEs and NORs would enhance the robustness and generalizability of the findings. Supplementary Information Supplementary Information. Supplementary Information.