Perfluorocubane as a σ* orbital-based electron acceptor beyond classical electron-transfer models Authors: Midori Akiyama, Keima Higashio, Hikaru Sotome, Kosaku Kato, Akira Yamakata, Shunsuke Yabu, Hirofumi Sato, Masahiro Higashi, Kenji Komaguchi, W. Ryan Osterloh, Hiroshi Imahori Published: 2026 ABSTRACT Perfluorocubane is an unconventional electron acceptor whose lowest unoccupied molecular orbital is composed entirely of σ* orbitals. In contrast to conventional acceptors that stabilize excess charge through π*-orbital delocalization, perfluorocubane confines an electron with its compact cubic scaffold, giving rise to an almost point-charge-like electronic structure. Such an electronic configuration is expected to produce electron-transfer (ET) behavior beyond established donor–acceptor models. Here we investigate intramolecular photoinduced ET in a donor–acceptor molecule combining dimethylfluorene and perfluorocubane. Picosecond time-resolved transient absorption spectroscopy directly reveals charge separation and recombination in polar solvents. Analysis of the ET kinetics within the semiclassical Marcus framework yields an unusually large electronic coupling together with a substantial reorganization energy, an uncommon combination in π-conjugated donor–acceptor systems. These distinctive ET characteristics are attributed to the σ*-derived LUMO and the compact cubic architecture of perfluorocubane, establishing this molecule as a platform for accessing previously unexplored regimes of molecular electron-transfer chemistry. Introduction Electron donor and acceptor molecules play crucial roles in organic functional materials. Traditionally, π-conjugated compounds serve as the primary donors and acceptors. In classical acceptor molecules, π-conjugation lowers the LUMO energy level and works to stabilize the accepted electron through delocalization over the molecular surface via π* orbitals. In 2022, we developed a class of electron acceptors based on a non-π-conjugated architecture, namely perfluorocubane. In this molecule, multiple σ* orbitals of C–F bonds converge inside the cubic scaffold to form a stabilized vacant orbital that functions as the LUMO (Fig. 1a)1–5. We successfully synthesized perfluorocubane via direct fluorination using F2 gas and determined its LUMO energy level to be −2.7 eV. Furthermore, its one-electron-reduced species was observed in a glass matrix at 77 K by ESR measurements, confirming its ability to accommodate an electron within the cubic skeleton, a phenomenon aptly described as an electron in a cube6,7. While the precise nature of this confined electronic state remains under discussion8–10, this mode of electron acceptance is fundamentally distinct from that of conventional π-conjugated acceptors, as the accepted electron is associated with the cage interior, providing a molecular platform that approximates a point-charge-like electronic structure. This electron-accepting character motivated us to investigate photoinduced electron transfer (ET) involving a perfluorocubane structure.Fig. 1Electron-accepting properties of perfluorocubane and molecular structures of the donor–acceptor systems.a Electron-accepting properties of σ* orbital-based perfluorocubane and conventional π*-based aromatic electron acceptors. b Molecular structure of donor–acceptor linked molecules used in this work, Flu-Cub and Flu-HCub. Electron-accepting properties of perfluorocubane and molecular structures of the donor–acceptor systems. a Electron-accepting properties of σ* orbital-based perfluorocubane and conventional π*-based aromatic electron acceptors. b Molecular structure of donor–acceptor linked molecules used in this work, Flu-Cub and Flu-HCub. To evaluate ET properties, donor–acceptor (D–A) linked molecules, in which a donor and an acceptor are connected via a bridge, are frequently employed11–23. The covalent linkage established a fixed electronic coupling (V) between the donor and acceptor, eliminating complexities associated with intermolecular ET in solution due to diffusion. As a result, these linked systems enable precise experimental determination of key ET parameters, including V and reorganization energy (λ)24. The magnitude of V is influenced by the orbital overlap between the donor and acceptor moieties through the bridge, and thus increases as the D–A separation distance (RD–A) decreases25. In contrast, λ, which depends on multiple factors including molecular size, electronic structure, separation distance, and the surrounding environment, exhibits the opposite trend: the solvent reorganization energy (λs) generally decreases with decreasing RD–A. Consequently, the simultaneous realization of both a large λ and a strong V is intrinsically difficult, representing a longstanding challenge in ET chemistry. This report explores intramolecular photoinduced ET using perfluorocubane as an acceptor. Its point-charge-like electron-accepting nature enables the simultaneous achievement of a large reorganization energy and strong electronic coupling. A D–A linked molecule, composed of 9,9-dimethylfluorenyl (D) and perfluorocubyl (A) structure (Flu-Cub, Fig. 1b), has been thoughtfully designed and characterized via spectroscopic and electrochemical methods. Furthermore, the ET dynamics of this D–A linked molecule in polar solvents are examined by means of picosecond time-resolved transient absorption (TA) spectroscopy, which is compared to a reference system comprised of 9,9-dimethylfluorenyl linked to a non-fluorinated cubane lacking the electron-accepting properties (Flu-HCub, Fig. 1b). Flu-Cub demonstrates a markedly larger λ value than previously studied π-conjugated D–A pairs while maintaining relatively strong V. This characteristic is consistent with the highly localized nature of the acceptor within the cubic framework. Results The D–A linked molecule (Flu-Cub) was strategically designed to investigate the electron-accepting nature of the perfluorocubyl (Cub) structure (Fig. 1b). Given the low molar absorption coefficient of perfluorocubane6, initiating photoinduced ET via selective photoexcitation of the donor moiety is preferable. 9,9-Dimethylfluorene was selected as the donor to meet specific criteria: Its excitation energy is lower than that of the perfluorocubane (290 nm) to prevent undesirable energy transfer and allow selective excitation26. Moreover, the introduction of methyl groups serves to suppress deprotonation in the oxidized form, mitigating the risk of undesired chemical reactions27,28. DFT calculations (B3LYP/6-31 G(d))29,30 reveal that the HOMO and LUMO of Flu-Cub are distinctly localized on the donor and acceptor moieties, respectively (Fig. 2). The HOMO orbital extends into the methylene group of the phenyl ring in the bridge, whereas the LUMO is similarly spread over the carbonyl group of the amide. Based on this spatial distribution, the edge-to-edge separation distance between the benzylic α-carbon and the carbonyl carbon was defined as D–A distance (Ree). Ree is estimated to be 3.40 Å, indicating the formation of a close contact ion pair in the charge-separated state (vide infra). For comparison, Flu-HCub, featuring a non-fluorinated cubyl group in place of the perfluorcubyl group, was also designed. Its HOMO is similar to that of Flu-Cub, while its LUMO is also localized on the donor moiety, a result consistent with the absence of fluorine on the cubyl moiety. Synthesis of Flu-Cub was achieved by the condensation of (4-(9,9-dimethylfluoren-2-yl)phenyl)methanamine and heptafluorocubane carboxylate ester (For details, see the SI). The molecular structure was characterized by solution 1H, 13C, and 19F NMR spectroscopy (Figs. S1–S4), Fourier transform-infrared (FT-IR) spectroscopy (Fig. S5), and high-resolution mass spectrometry (HRMS) (Fig. S6).Fig. 2Distributions of the frontier orbitals of Flu-Cub (left) and Flu-HCub (right).Calculated by B3LYP/6-31 G(d). Isovalue = 0.02. Distributions of the frontier orbitals of Flu-Cub (left) and Flu-HCub (right). Calculated by B3LYP/6-31 G(d). Isovalue = 0.02. The UV-Vis absorption spectrum of Flu-Cub in benzonitrile (BN) showed a peak with an absorption edge at 340 nm (Fig. 3). The peak profile is very similar to that of the reference compound, Flu-ref, suggesting that the absorption originates from the 2-phenyl-9,9-fluorene moiety. Given that the molar absorption (ε) value at 315 nm of Cub-ref (40.4 M−1 cm−1) is considerably smaller than that of Flu-Cub (2.18 × 104 M−1 cm−1), the donor moiety can be selectively excited by a 315 nm laser pluse.Fig. 3UV-Vis absorption spectra of Flu-Cub, Flu-ref, and Cub-ref in benzonitrile. UV-Vis absorption spectra of Flu-Cub, Flu-ref, and Cub-ref in benzonitrile. Picosecond time-resolved transient absorption (TA) spectra were measured in polar solvents to investigate the excited-state dynamics of Flu-Cub and its reference Flu-HCub without fluorine atoms on the cubyl moiety. In the TA spectrum of Flu-HCub in BN, an absorption at 560 nm emerged and decayed over several hundred picoseconds (Fig. 4a). Global analysis of the TA profile identified three distinct lifetime components (τ) of 46, 311, and 1959 ps (Figs. 4b, S9a), which are respectively attributed to the vibrational relaxation, subsequent structural relaxation in the S1 state, and the S1 state lifetime of the donor moiety31. In contrast, the TA spectrum of Flu-Cub in BN exhibited a TA peak at 560 nm, with a faster decay occurring within tens of picoseconds, eventually showing peaks at 460 and 560 nm (Fig. 4c). Global analysis revealed three lifetime components: τ = 5, 70, and 868 ps (Figs. 4d, S9b). The first component is attributed to the internal conversion from the S2 to the S1 state and subsequent vibrational cooling. The second component resembles τ2 observed in Flu-HCub, but decays more rapidly, suggesting that the S1 state of the donor moiety is efficiently quenched by ET to the acceptor moiety. The third component presents moderate positive peaks at 470 and 560 nm, alongside broader signals at 880 and 990 nm. Experimental absorption spectra of the donor radical cation and the acceptor radical anion could not be obtained via spectroelectrochemical analysis and chemical oxidation/reduction due to their limited stability in solution on millisecond time scales6,32. Therefore, we employed the low-temperature matrix-isolation technique to obtain the absorption spectra of Flu-ref•+ and Cub-ref•−33 (Fig. S10). Flu-ref and Cub-ref were dissolved in cryogenic matrices (a 1:1 v/v mixture of trichlorofluoromethane and 1,2-dibromo-1,1,2,2-tetrafluoroethane for Flu-ref, and 2-methyltetrahydrofuran for Cub-ref, respectively) and irradiated with γ-rays at 77 K. After photobleaching of matrix-derived absorption features, absorption spectra were recorded at 77 K. Flu-ref•+ exhibits broad absorption peaks at 800–1000 nm with vibronic structure, together with bands below 600 nm, in good agreement with previously reported radical cations of structurally related fluorene derivatives34,35. Minor differences in peak positions and relative intensities are likely attributable to differences in the solvents used for the measurements. These characteristic features correspond to the third component (τ3) in Fig. 4d. In contrast, the radical anion Cub-ref•− displays a prominent absorption peak at 330 nm, but no characteristic absorption in the 400–1000 nm region (Fig. S10c). This spectral region was excluded from the TA analysis due to overlap with fluorescence from 1Flu*. Nevertheless, considering the efficient quenching of 1Flu* by the Cub unit, τ3 can be confidently assigned to the charge-separated state (Fig. 5). It is noteworthy that no decomposition of Flu-Cub was observed in the NMR spectra after the TA measurements.Fig. 4Transient absorption spectroscopy of Flu-HCub and Flu-Cub in benzonitrile.a Transient absorption spectra and b global analysis of Flu-HCub. c Transient absorption spectra and d global analysis of Flu-Cub. The excitation wavelength for both (a) and (c) was 315 nm. The delay times are given in (a) and (c), whereas the lifetimes of the respective components are shown in (b) and (d).Fig. 5Jablonski diagram of Flu-Cub in benzonitrile. Transient absorption spectroscopy of Flu-HCub and Flu-Cub in benzonitrile. a Transient absorption spectra and b global analysis of Flu-HCub. c Transient absorption spectra and d global analysis of Flu-Cub. The excitation wavelength for both (a) and (c) was 315 nm. The delay times are given in (a) and (c), whereas the lifetimes of the respective components are shown in (b) and (d). Jablonski diagram of Flu-Cub in benzonitrile. To quantify the ΔG dependence on the rate constants of charge separation (CS) and charge recombination (CR), Eq. (1)36,37 was applied. This equation, developed by Marcus et al., is a semiclassical theory describing the ET rate dependency on the energy gap while incorporating quantum mechanical considerations of vibrational coupling. In this framework, kB represents the Boltzmann constant, h denotes the Planck constant, and w denotes the vibrational quantum number.1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{{{\rm{ET}}}}= \frac{2}{h}\sqrt{\frac{{\pi }^{3}}{{k}_{{{\rm{B}}}}T}}{\lambda }_{{{\rm{s}}}}^{-\tfrac{1}{2}}{{|V|}}^{2} \sum_{w=0}^{\infty }\frac{1}{w!}{\left(\frac{{\lambda }_{{{\rm{V}}}}}{h\nu }\right)}^{w}\\ \times \exp \left[-\left(\frac{{\lambda }_{{{\rm{V}}}}}{h\nu }\right)-\frac{{\left({\lambda }_{{{\rm{S}}}}+\Delta G+{wh}\nu \right)}^{2}}{4{\lambda }_{{{\rm{s}}}}{k}_{{{\rm{B}}}}T}\right]$$\end{document}kET=2hπ3kBTλs−12∣V∣2 ∑w=0∞1w!λVhνw×exp−λVhν−λS+ΔG+whν24λskBT TA measurements of Flu-Cub were conducted in various polar solvents, including acetonitrile (CH3CN), N,N-dimethylformamide (DMF), BN, and a 1:1 mixture of BN and anisole, to determine the rate constants of CS and CR (kCS and kCR) (Table 1). Electrochemical potentials and excited state energies (E0-0) were used to determine the −ΔG values for CS and CR (−ΔGCS and −ΔGCR) in these solvents (Figs. S7, S8). A simulated curve based on Eq. (1) was generated to fit the experimental data (Fig. 6a). The inner-sphere reorganization energy (λv) was fixed at 0.509 eV, as it was estimated from theoretical calculations (B3LYP/6-31 + G(d,p), vide infra)38. The V, outer-sphere reorganization energy (λs), and the frequency of vibrational coupling (ν) were optimized to fit the observed data, yielding values of V = 76.3 cm−1, λs = 1.08 eV, ν = 1501 cm−1. Considering that variations in the λs values are negligible compared to other factors, such as experimental uncertainties, under the present polar solvent conditions (εs > 14), λs is assumed to be identical for all polar solvents used in this study14,38–40.Fig. 6Driving force dependence of the ET rate and comparison of ET parameters.a Driving force (−ΔGET) dependence of intramolecular ET rate constants (kET) for Flu-Cub. Black dots represent experimental data while the red line represents a fitting curve generated via Eq. (1) using V = 76.3 cm−1, λs = 1.08 eV, ν = 1501 cm−1 (λv = 0.509 eV, fixed). b Plot of λ against V for reported D–A linked molecules (Table 2) and Flu-Cub.Table 1Redox potentials (vs Ferrocene/Ferrocene+) in various solvents, excited state energies (E0-0), driving forces for ET, and ET rates for Flu-Cub in various polar solventsSolvent (εs)E0ox/VE0red/VE0-0/eV−ΔGCS/eV−ΔGCR/eVkCS/s−1kCR/s−1DMF (36.7)+1.04−2.113.760.653.112.24 × 10107.20 × 109Acetonitrile (35.9)+1.07−2.063.790.703.094.64 × 10101.16 × 109Benzonitrile (BN) (25.2)+1.01−2.143.720.623.101.43 × 10101.15 × 109BN+anisole (v/v = 1/1) (14.8)+1.01−2.203.730.623.121.73 × 10101.09 × 109 Driving force dependence of the ET rate and comparison of ET parameters. a Driving force (−ΔGET) dependence of intramolecular ET rate constants (kET) for Flu-Cub. Black dots represent experimental data while the red line represents a fitting curve generated via Eq. (1) using V = 76.3 cm−1, λs = 1.08 eV, ν = 1501 cm−1 (λv = 0.509 eV, fixed). b Plot of λ against V for reported D–A linked molecules (Table 2) and Flu-Cub. Table 1Redox potentials (vs Ferrocene/Ferrocene+) in various solvents, excited state energies (E0-0), driving forces for ET, and ET rates for Flu-Cub in various polar solventsSolvent (εs)E0ox/VE0red/VE0-0/eV−ΔGCS/eV−ΔGCR/eVkCS/s−1kCR/s−1DMF (36.7)+1.04−2.113.760.653.112.24 × 10107.20 × 109Acetonitrile (35.9)+1.07−2.063.790.703.094.64 × 10101.16 × 109Benzonitrile (BN) (25.2)+1.01−2.143.720.623.101.43 × 10101.15 × 109BN+anisole (v/v = 1/1) (14.8)+1.01−2.203.730.623.121.73 × 10101.09 × 109 Redox potentials (vs Ferrocene/Ferrocene+) in various solvents, excited state energies (E0-0), driving forces for ET, and ET rates for Flu-Cub in various polar solvents The obtained ET parameters (V and λ) were compared to previously reported examples of photoinduced ET between donor and acceptor molecules in polar solvents (Table 2). Gould and Farid conducted studies on intermolecular photoinduced ET using methylated benzenes, naphthalenes, biphenyls, and phenanthrenes as typical donors, and 9,10-dicyanoanthracene (DCA) and 2,6,9,10-tetracyanoanthracene (TCA) as typical acceptors41. Their findings revealed that, in polar solvents, contact radical-ion pairs (CRIPs) exhibit large V and small λ (entry 2), whereas solvent-separated radical-ion pairs (SSRIPs) display small V and large λ (entry 3). A similar trade-off between V and λ is also observed for intramolecular ET—i.e., linked molecules with short bridge structures exhibit large V and small λ (entries 8–11), whereas those with long bridges show small V and large λ (entries 7 and 12–15). Although the Ree value of Flu-Cub (3.40 Å) is comparable to those of CRIPs reported by Gould and Farid and Flu-Cub exhibits large V (76.3 cm−1) characteristics of CRIPs, it simultaneously exhibits large λ, which is comparable to that of SSRIPs (Fig. 6b). These results make Flu-Cub a remarkable example exhibiting both large V and λ in polar solvents.Table 2Reported D–A pairs and their ET parametersEntryDonorAcceptorInter or intra-moleculeSolventRcc/ÅRee/Åλs/eVλv/eVλ/eVV/cm−1Ref.1FluoreneFluorocubaneIntra10.513.401.080.5091.5976.3TW2Methyl benzeneDCA, TCAInterCH3CN-CRIP0.480.250.73750413Methyl benzeneDCA, TCAInterCH3CN-SSRIP1.630.251.8811.5414Methyl naphthalene, methyl biphenylCyano anthraceneInterCH3CN--1.480.251.738.5505MethylphenanthleneCyano anthraceneInterCH3CN--1.400.251.658.0506PyrenePhthalic anhydrideInterCH3OH--0.80.31.140377Biphenylπ-moleculesIntraMTHF17.410.30.750.451.26.251,528BiphenylNaphthaleneIntraTHF6.25.30.47--5851,529BiphenylNaphthaleneIntraTHF12.56.40.69--6351,5210PorphyrinQuinoneIntraCH3CN4.5-0.190.590.781025311Zinc-porphyrinQuinoneIntraCH3CN4.5-0.260.530.791335412Zinc-porphyrinC60IntraTHF, BN, DMF-11.9--0.663.93813Zinc-porphyrinC60IntraTHF, BN, DMF-11.9--0.597.91414PDI(py)C60IntraBN, pyridine, ODCB15.36.90.640.220.86134215Zinc-porphyrinNDIIntraTHF, BN, DMF-11.9--1.417.814DCA 9,10-dicyanoanthracene, TCA 2,6,9,10-tetracyanoanthracene, PDI(py) pyrrolidine-substituted perylenediimide, NDI naphthalenediimide, MTHF 2-methyltetrahydrofuran, THF tetrahydrofuran, BN benzonitrile, DMF N,N-dimethylformamide, ODCB o-dichlorobenzene, CRIP contact radical-ion pair, SSRIP solvent-separated radical-ion pairs, TW this work. Table 2Reported D–A pairs and their ET parametersEntryDonorAcceptorInter or intra-moleculeSolventRcc/ÅRee/Åλs/eVλv/eVλ/eVV/cm−1Ref.1FluoreneFluorocubaneIntra10.513.401.080.5091.5976.3TW2Methyl benzeneDCA, TCAInterCH3CN-CRIP0.480.250.73750413Methyl benzeneDCA, TCAInterCH3CN-SSRIP1.630.251.8811.5414Methyl naphthalene, methyl biphenylCyano anthraceneInterCH3CN--1.480.251.738.5505MethylphenanthleneCyano anthraceneInterCH3CN--1.400.251.658.0506PyrenePhthalic anhydrideInterCH3OH--0.80.31.140377Biphenylπ-moleculesIntraMTHF17.410.30.750.451.26.251,528BiphenylNaphthaleneIntraTHF6.25.30.47--5851,529BiphenylNaphthaleneIntraTHF12.56.40.69--6351,5210PorphyrinQuinoneIntraCH3CN4.5-0.190.590.781025311Zinc-porphyrinQuinoneIntraCH3CN4.5-0.260.530.791335412Zinc-porphyrinC60IntraTHF, BN, DMF-11.9--0.663.93813Zinc-porphyrinC60IntraTHF, BN, DMF-11.9--0.597.91414PDI(py)C60IntraBN, pyridine, ODCB15.36.90.640.220.86134215Zinc-porphyrinNDIIntraTHF, BN, DMF-11.9--1.417.814DCA 9,10-dicyanoanthracene, TCA 2,6,9,10-tetracyanoanthracene, PDI(py) pyrrolidine-substituted perylenediimide, NDI naphthalenediimide, MTHF 2-methyltetrahydrofuran, THF tetrahydrofuran, BN benzonitrile, DMF N,N-dimethylformamide, ODCB o-dichlorobenzene, CRIP contact radical-ion pair, SSRIP solvent-separated radical-ion pairs, TW this work. Reported D–A pairs and their ET parameters DCA 9,10-dicyanoanthracene, TCA 2,6,9,10-tetracyanoanthracene, PDI(py) pyrrolidine-substituted perylenediimide, NDI naphthalenediimide, MTHF 2-methyltetrahydrofuran, THF tetrahydrofuran, BN benzonitrile, DMF N,N-dimethylformamide, ODCB o-dichlorobenzene, CRIP contact radical-ion pair, SSRIP solvent-separated radical-ion pairs, TW this work. To investigate the origin of both large λ and V in Flu-Cub, theoretical calculations were performed. Vibrational reorganization energies (λv) were estimated using DFT calculations (B3LYP/6-31 + G(d,p)) according to Eq. (2)42.2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\lambda }_{{{\rm{v}}}}=E}_{{{\rm{ion}}}-{{\rm{at}}}-{{\rm{neutral}}}}-{E}_{{{\rm{ion}}}}$$\end{document}λv=Eion−at−neutral−Eion The donor and acceptor components (Flu and Cub, capped with CH3 groups) were analyzed separately, with additional comparisons to typical π orbital-based acceptors and donors: DCA, TCA, and toluene. The calculated λv values for Flu as donor is 0.158 eV, which is similar to that of toluene (0.162 eV). However, Cub demonstrates a significantly large λv of 0.351 eV compared to DCA (0.100 eV) and TCA (0.082 eV), likely due to its pronounced structural alterations upon one-electron reduction. Structural changes between neutral and radical anion species of C8F8 and DCA are summarized in Fig. 7. For simplicity, C8F8 was selected instead of Cub, though both exhibit the same trend. While bond length variations in DCA remain below 1.7%, C–F bonds in C8F8 elongate by 3.67% upon reduction. This substantial bond elongation is attributed to the distinctive electronic structure of C8F8 radical anion, where the accepted electron primarily occupies the σ*C–F orbitals within the compact cubic framework, leading to the large λv value.Fig. 7Changes in bond length of C8F8 and DCA upon one-electron reduction.Calculated by B3LYP/6-31 + G(d,p). Changes in bond length of C8F8 and DCA upon one-electron reduction. Calculated by B3LYP/6-31 + G(d,p). Solvent reorganization energies (λs) were also estimated using DFT calculations. When λs was computed separately for the donor and acceptor, the values tended to be overestimated, which is likely due to the independent solvation of the cation and anion. To address this, λs was determined for the linked molecule, Flu-Cub, using quantum mechanical/molecular mechanical reweighting free-energy self-consistent field (QM/MM RWFE-SCF) calculations43 for BN combined with TD-CAM-B3LYP/6-31 + G(d,p)44–46. The ground (S0), locally excited (LE), and CS states of Flu-Cub were computed. The λs values for CS (LE to CS) and CR (CS to S0) were calculated to be 1.003 and 0.948 eV, respectively, aligning well with the experimental value. The relatively large λs of Flu-Cub can be attributed to the confinement of the accepted electron within Cub’s compact 3D structure, which results in a smaller charge radius, resembling a point charge. According to Eq. (3)47, a small charge radius leads to a larger λs, where εop represents the optical dielectric constant, RD and RA denote the radii of the donor and acceptor, and Rcc denotes the center-to-center distance between the donor and acceptor.3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\lambda }_{{{\rm{s}}}}=\frac{{e}^{2}}{4\pi {\varepsilon }_{0}}\left(\frac{1}{2{R}_{{{\rm{D}}}}}+\frac{1}{2{R}_{{{\rm{A}}}}}-\frac{1}{{R}_{{{\rm{cc}}}}}\right)\left(\frac{1}{{\varepsilon }_{{{\rm{op}}}}}-\frac{1}{{\varepsilon }_{{{\rm{s}}}}}\right)$$\end{document}λs=e24πε012RD+12RA−1Rcc1εop−1εs Electronic coupling (V) of Flu-Cub was determined using the multiscale fragment excitation difference-fragment charge difference (multi-FED-FCD) diabatization method48. The electronic coupling between the LE and CS states was estimated to be 102 cm−1 at the TD-CAM-B3LYP/6-31 + G(d,p) level in BN (Fig. 8). These computed values are higher than the experimental value (76.3 cm−1). The electronic coupling could be overestimated, as reported for the fragment charge difference (FCD) method49. In the LE state, the electron is mainly localized on the dimethylfluorenylphenyl moiety, but is also partially delocalized over the amide and Cub moieties. This partial delocalization likely plays a key role in enhancing the large V observed for Flu-Cub. Overall, these computational findings are consistent with our treatment, indicating that the CS state functions as a CRIP (vide supra).Fig. 8Calculation of the electronic coupling of Flu-Cub.Calculated by a multi-FED-FCD method at the TD-CAM-B3LYP/6-31 + G(d,p) level in benzonitrile (BN). Calculation of the electronic coupling of Flu-Cub. Calculated by a multi-FED-FCD method at the TD-CAM-B3LYP/6-31 + G(d,p) level in benzonitrile (BN). Discussion We achieved photoinduced electron transfer (ET) involving perfluorocubane, a σ*-orbital-based electron acceptor molecule, which confines an electron with its compact cubic framework. The accepted electron is resides within the cage interior, which is in stark contrast to the accepted electron by conventional π-conjugated acceptor molecules, delocalized over the molecular surface. A donor–acceptor (D–A) linked molecule, Flu-Cub, was synthesized and its photoinduced ET behavior was examined using picosecond transient absorption spectroscopy. Upon photoexcitation, charge separation (CS) and charge recombination (CR) were sequentially observed in polar solvents. The rates and Gibbs free energy changes for CS and CR were plotted and fitted using the Marcus’s semiclassical equation, yielding reorganization energies (λs = 1.08 eV, λv = 0.509 eV) and electronic coupling (V = 76.3 cm−1). Flu-Cub exhibited a combination of a large λ and large V, showing characteristics of contact radical-ion pairs with large V while simultaneously possessing a substantially larger λ than previously reported D–A pairs. This phenomenon is rationalized by the distinct electronic properties of perfluorocubane, where the accepted electron is strongly associated with the compact 3D cage interior through occupation of the σ*C–F orbitals. Overall, this work establishes perfluorocubane as an unconventional electron acceptor exhibiting an unusually large reorganization energy, originating from the point-charge-like nature of the cage-interior electronic state. These findings highlight the potential of localized electronic states for modulating charge-transfer and charge-transport processes and may provide useful insights for the design of next-generation molecular materials. Methods Detailed experimental procedures are described in the Supplementary Information. Supplementary information Supplementary Information Description of Additional Supplementary Information Supplementary Data 1 Transparent Peer Review file Supplementary Information Description of Additional Supplementary Information Supplementary Data 1 Transparent Peer Review file