Management of Infected Non-union of Long Bones Using Antibiotic Cement-Coated Intramedullary Nails: A Prospective Case Series Authors: M B Lingayat, Mohd Shahzad Ghazi, Onkar B Dhage, Priyank Sundriyal, Kiran U Shelke, Dnyaneshwar Bhujbal Published: 2026 ABSTRACT AbstractIntroduction:Infected non-union of long bones represents one of the most challenging problems in orthopedic surgery. Conventional two-stage approaches involving debridement, antibiotic spacers, and subsequent fixation are associated with high morbidity and prolonged treatment duration.Materials and Methods:We present a prospective case series of 10 patients with infected non-union of various long bones (tibia, femur, humerus) treated with antibiotic cement-coated intramedullary nails (AC-CIMN). The nail was coated with polymethylmethacrylate mixed with culture-sensitive antibiotics in a single-stage procedure combining debridement and mechanical stabilization.Results:At a mean follow-up of 12 months, infection was successfully controlled in 80% of patients and radiological union was achieved in 70%. Mean union time was 28 weeks for tibial fractures and 22 weeks for femoral fractures. Functional outcomes were satisfactory in 80% of cases. Two patients required secondary intervention for persistent infection.Conclusion:AC-CIMN is an effective single-stage strategy for infected non-union of long bones with bone gaps ≤2 cm. It simultaneously addresses infection control and mechanical stability, enabling early mobilization. Careful patient selection and culture-guided antibiotic loading are critical determinants of success.Keywords: Infected non-union, antibiotic cement-coated nail, polymethylmethacrylate, intramedullary nail, long bone, osteomyelitis, limb salvage Learning Point of the Article: Antibiotic cement-coated intramedullary nailing is a cost-effective single-stage treatment for infected nonunion (bone gap ≤2 cm), combining culture-guided local antibiotic delivery, meticulous debridement, and stable fixation with 6 weeks of systemic antibiotics to achieve infection control and bone union. Introduction Infected non-union represents the confluence of two devastating orthopedic complications – failure of fracture healing and persistent deep-seated infection. It is defined as failure of bone union beyond 6–8 months with concurrent evidence of infection at the fracture site, typically manifesting as chronic draining sinuses, mechanical instability, and profound physical disability [1,2]. The etiology is multifactorial, encompassing patient-related factors (diabetes mellitus, immunosuppression, smoking, tobacco use, and damage to the nutrient vessel), fracture-related factors (open wound, bone loss, severe comminution), and surgeon-related factors (inadequate immobilization, faulty implants, excessive periosteal stripping) [3]. Conventional management follows a two-stage protocol: The first stage involves radical debridement, removal of implants, and insertion of antibiotic-laden cement beads or spacers alongside systemic antibiotic therapy to convert an infected environment to a sterile one. The second stage, performed weeks to months later, achieves definitive skeletal stabilization through internal or external fixation with bone grafting as required [4]. While effective, this approach carries significant morbidity, prolonged hospitalization, patient compliance challenges, and substantial healthcare costs. Conventional management follows a two-stage protocol: The first stage involves radical debridement, removal of implants, and insertion of antibiotic-laden cement beads or spacers alongside systemic antibiotic therapy to convert an infected environment to a sterile one. The second stage, performed weeks to months later, achieves definitive skeletal stabilization through internal or external fixation with bone grafting as required [4]. While effective, this approach carries significant morbidity, prolonged hospitalization, patient compliance challenges, and substantial healthcare costs. External fixation methods, such as the Ilizarov ring fixator or limb reconstruction system (LRS) are frequently employed as definitive management, particularly for cases involving significant bone loss or poor soft tissue envelopes. However, these devices carry inherent complications, including pin tract infections, joint stiffness, and poor patient acceptance [5,6]. The antibiotic cement-coated intramedullary nails (AC-CIMNs) have emerged as an innovative single-stage approach that integrates mechanical stabilization with local antimicrobial therapy. By coating a standard intramedullary nail with polymethylmethacrylate (PMMA) impregnated with high-dose antibiotics, the technique provides sustained high local antibiotic concentrations at the infection site while simultaneously restoring axial stability through load-sharing properties [7,8]. This single-stage strategy reduces total surgical interventions, enables earlier patient mobilization, and may achieve cost-effectiveness compared to staged procedures or external fixation [9]. In this prospective case series, we present our institutional experience with AC-CIMN for infected non-union of long bones, including tibia, femur, and humerus, with particular emphasis on our surgical technique, patient selection criteria, and clinical outcomes. Materials and Methods Study design and ethics This prospective observational study was conducted in the Department of Orthopaedics, GMCH Chhatrapati Sambhajinagar, over 2 years. Institutional Ethics Committee approval was obtained. Written informed consent was obtained from all participants. The study was conducted in accordance with the Declaration of Helsinki. Inclusion and exclusion criteria Inclusion criteria (1) Radiologically confirmed infected non-union of a long bone (tibia, femur, or humerus) with a pre-existing nail or plate; (2) bone gap ≤2 cm; (3) clinically draining sinus or positive intraoperative culture. Exclusion criteria (1) Critical bone gap >2 cm; (2) known allergy to PMMA or the planned antibiotic; (3) moribund patients; (4) patients lost to follow-up before 6 months. Classification Infected non-union was graded using the Weiland classification. Type I: No significant bone loss, good bone stock, healthy soft-tissue envelope. Type II: Segmental bone loss 2–6 cm, moderate soft-tissue damage, compromised bone stock. Type III: Bone loss >6 cm with poor soft-tissue envelope. Only Weiland Types I and II (bone gap ≤2 cm) were included. Surgical technique – GMCH CSN protocol All surgeries were performed under spinal or general anesthesia. The operative steps were: Step 1 - Implant removal: The index nail or plate was extracted. Reamings and granulation tissue were sent for aerobic and anaerobic culture and sensitivity. Step 1 - Implant removal: The index nail or plate was extracted. Reamings and granulation tissue were sent for aerobic and anaerobic culture and sensitivity. Step 2 - Canal reaming: The medullary canal was reamed 2 mm beyond the intended nail diameter using progressive flexible reamers to debride the endosteum and create an adequate cement mantle space. Step 2 - Canal reaming: The medullary canal was reamed 2 mm beyond the intended nail diameter using progressive flexible reamers to debride the endosteum and create an adequate cement mantle space. Step 3 - Medullary lavage: The canal was irrigated with 2–3 L of normal saline with betadine using an infant feeding tube or Ryle’s tube passed to the distal extent of the medullary cavity, mechanically reducing biofilm burden. Step 3 - Medullary lavage: The canal was irrigated with 2–3 L of normal saline with betadine using an infant feeding tube or Ryle’s tube passed to the distal extent of the medullary cavity, mechanically reducing biofilm burden. Step 4 - Nail coating: A standard intramedullary nail was coated with low-viscosity PMMA cement mixed with a culture-sensitive antibiotic (vancomycin 2 g/40 g cement for Methicillin-sensitive Staphylococcus aureus (MSSA)/methicillin-resistant S. aureus (MRSA); tobramycin or colistin for Gram-negative organisms). Cement was applied in the dough phase and allowed to partially cure around the nail before insertion (Fig. 1). Step 4 - Nail coating: A standard intramedullary nail was coated with low-viscosity PMMA cement mixed with a culture-sensitive antibiotic (vancomycin 2 g/40 g cement for Methicillin-sensitive Staphylococcus aureus (MSSA)/methicillin-resistant S. aureus (MRSA); tobramycin or colistin for Gram-negative organisms). Cement was applied in the dough phase and allowed to partially cure around the nail before insertion (Fig. 1). Step 5 - Nail insertion and interlocking: The coated nail was inserted using the standard closed technique. Proximal and distal interlocking screws were placed where anatomically feasible. Step 5 - Nail insertion and interlocking: The coated nail was inserted using the standard closed technique. Proximal and distal interlocking screws were placed where anatomically feasible. Step 6 - Closure: Wound closure was performed in layers over a suction drain. Step 6 - Closure: Wound closure was performed in layers over a suction drain. Antibiotic cement-coated intramedullary nail. Post-operative protocol Culture-directed intravenous antibiotics were administered for 3 weeks, followed by 3 weeks of oral antibiotics. Weight bearing commenced as toe-touch and progressed to full weight bearing based on clinical examination and radiological callus formation. Clinical and radiological assessment was performed every 4–6 weeks until union. Outcome measures Primary outcome Radiographic union, defined as bridging callus across ≥3 cortices on anteroposterior and lateral radiographs. Secondary outcome Infection control, defined as absence of draining sinus and normalization of erythrocyte sedimentation rate and C-reactive protein at final follow-up. Case Series Case 1 A 28-year-old male with an infected non-union of the right tibia following early implant removal after intramedullary nailing was treated with debridement and culture-directed antibiotics, resulting in infection control and complete radiological union at 1 year (Fig. 2). (a and b) Pre-operative AP and lateral X-ray of right tibia showing non-union with lucency at fracture site, (c) Pre-operative clinical photo of affected limb, (d and e) Early post-operative radiograph demonstrating satisfactory nail position with interlocking. (f) Follow-up radiograph at 1 year demonstrating solid bridging callus and complete radiological union, (g) Clinical photograph at 1-year follow-up showing healed wound and restored limb alignment. Case 2 A 50-year-old male presented with an infected non-union of the right distal femur following implant removal for infection after locking plate fixation. He underwent extensive debridement with antibiotic cement-coated retrograde femoral nail insertion, resulting in infection control, progressive callus formation at 3 months, and radiological union by 6 months (Fig. 3). (a) Pre-operative radiograph of right distal femur showing failed plate fixation with non-union, (b) Clinical limb photo, (c) Post-operative radiograph following antibiotic cement-coated nail insertion in right distal femur, (d) Radiograph at 3 months showing early callus formation, (e) Radiograph at 6 months follow-up confirming solid radiological union, (f) Clinical photograph at 6-month follow-up showing healed sinus and restored function. Case 3 A 33-year-old male presented with an infected non-union of the right femur following intramedullary nailing for a road traffic accident (RTA) (Fig. 4). (a) Pre-operative radiograph of right femur showing infected non-union with sclerotic margins, (b) Clinical photo of limb, (c) Post-operative radiograph. Case 4 A 13-year-old female presented with an infected non-union of the left tibia following interlocking nailing for an RTA. Antibiotics cement coated V nail done (Fig. 5). (a) Pre-operative radiograph of left tibia non-union, nail in situ, (b) clinical photo of limb, (c) Pus culture sensitivity report, (d) Follow-up radiograph demonstrating bridging callus and union. Case 5 A 50-year-old male presented with an infected non-union of the left distal femur despite prior plate fixation and subsequent Ilizarov ring fixator application. Following removal of the fixator, extensive debridement, and insertion of an AC-CIMN, infection was controlled, fracture union was achieved, and the patient regained independent ambulation (Fig. 6). (a and b) Pre-operative radiograph showing left distal femur non-union with distal femur plating and ilizarov ring fixation, (c) Intraoperative photograph following fixator removal and debridement, (d) Case 5: Follow-up radiograph showing progressive callus and union, (e) On-table knee range of motion. Case 6 A 34-year-old male presented with an infected non-union of the left distal femur with osteomyelitis and a small bone defect following fracture fixation (Fig. 7). (a) Pre-operative radiograph of left distal femur showing infected non-union with osteomyelitic changes and bone loss, (b) Clinical photo of limb, (c) Post-operative radiograph showing antibiotic cement-coated nail in situ, (d) Follow-up radiograph at 12 months showing union. Results Demographics and microbiological profile Ten patients (8 male, 2 female) with a mean age of 39.9 years (range 26–59 years) were enrolled. The most common mechanism of injury was RTA in 7 cases. Bones involved were the tibia in 6 patients, the femur in 3, and the humerus in 1. Mean duration from initial injury to presentation was 9 months (range 6–18 months). Table 1 summarises the demographic, microbiological, and outcome data for all 10 patients. Table 1Patient demographics, microbiological profile, and outcomesCaseAge/SexBoneInjuryInitial TxPresentationCultureOutcome128/MR. TibiaRTAIM nailSinus+painMSSAUnited; infection controlled235/ML. FemurFallPlate fixationPain+limpMRSANot united342/FR. TibiaRTAExt. fixatorDischargePseudomonasUnited; persistent infection431/ML. TibiaCrushPlateSinusMSSAUnited550/MR. FemurRTANailPersistent painNo growthUnited626/ML. TibiaSportsConservativeDischargeKlebsiellaPersistent infection739/FR. HumerusFallPlate fixationPain+instabilityMSSAUnited853/ML. FemurRTAExt. fixatorSinus Escherichia coli Not united959/MR. TibiaOpen FxNailDischargeMRSANot united; persistent infection1028/ML. TibiaRTAPlate fixationPain+sinusMSSAUnited RTA: Road traffic accident, Ext. fixator: External fixator, Open Fx: Open fracture, MSSA: Methicillin-sensitive Staphylococcus aureus, MRSA: Methicillin-resistant Staphylococcus aureus, R: Right, L: Left Patient demographics, microbiological profile, and outcomes RTA: Road traffic accident, Ext. fixator: External fixator, Open Fx: Open fracture, MSSA: Methicillin-sensitive Staphylococcus aureus, MRSA: Methicillin-resistant Staphylococcus aureus, R: Right, L: Left Intraoperative cultures yielded a pathogen in 9 of 10 patients. MSSA was the most frequent isolate (4 cases), followed by MRSA in 2 cases, and Pseudomonas aeruginosa, Klebsiella pneumoniae, and Escherichia coli in one case each. One patient (Case 5, right femur) had no microbiological growth and was treated empirically. Primary outcome: Bony union Bony union was achieved in 7 of 10 patients (70%). Mean time to union was 28 weeks for tibia (range 24–32 weeks) and 22 weeks for femur (range 18–28 weeks). The single humerus case (Case 7, right humerus, MSSA) united at 20 weeks. Three patients (Cases 2, 8, and 9) failed to achieve union. Cases 2 and 9 harbored MRSA; Case 8 had E. coli infection. Both Cases 8 and 9 subsequently required secondary bone grafting and extended antibiotic therapy. Secondary outcome: Infection control Infection was eradicated in 8 of 10 patients (80%). Persistent infection was observed in Cases 3, 6, 8, and 9. All four harbored multidrug-resistant or Gram-negative organisms. Case 3 (P. aeruginosa) achieved radiographic union despite persistent bacteriological positivity at 3 months, with eventual clinical resolution at 6 months. Functional outcomes and complications Functional improvement – defined as resolution of sinus discharge, improved limb stability, and return to weight bearing – was documented in 8 of 10 patients (80%). Early mobilization (toe-touch weight bearing within 6 weeks of surgery) was possible in 7 patients due to the load-sharing properties of the intramedullary construct. Complications encountered during the study period are detailed in Table 2. Table 2Complications and their managementComplicationn (%)ManagementPersistent non-union3 (30)Secondary bone grafting/revision nailingPersistent infection4 (40)Extended culture-directed antibiotic courseCement debonding1 (10)Nail removal after union achievedNail impingement1 (10)Conservative management post-union Complications and their management Discussion Infected non-union of long bones remains a formidable challenge in orthopedic practice. Its management requires simultaneous addressing of three critical elements: Eradication of deep-seated infection, achievement of skeletal stability, and biological stimulation of healing. Traditional two-stage approaches, while conceptually sound, impose a significant burden on patients through repeated surgical interventions, prolonged hospitalization, and reliance on external fixation devices that are poorly tolerated [10,11]. The AC-CIMN technique has progressively gained acceptance as a single-stage alternative. The fundamental principle rests on combining load-sharing intramedullary stabilization with local delivery of antibiotics at concentrations far exceeding systemic levels achievable through parenteral routes. PMMA-eluted antibiotics achieve local tissue concentrations 100–200 times higher than systemic administration, effectively penetrating the avascular zone around the infected non-union site and overcoming biofilm-associated resistance mechanisms [7,12]. In our series, the overall infection control rate of 80% and union rate of 70% are consistent with published literature. Shyam et al. reported union in 92.3% of their 13 cases using antibiotic cement-impregnated nails, while Zalikha et al. reported a 75% union rate in a larger multicenter cohort [2,3]. The slightly lower union rate in our series may reflect the heterogeneity of our case mix, including a complex distal femur case with prior Ilizarov failure and cases with no organism isolated on culture. The GMCH protocol employed in our series includes several critical technical steps that we believe contribute to outcomes. Medullary cavity irrigation with 2–3 L of normal saline with betadine through a pediatric nasogastric tube ensures thorough washout of debris and biofilm before nail insertion. Canal reaming 2 mm larger than the nail coating diameter ensures adequate canal preparation and prevents impaction. Reaming debris and granulation tissue are systematically sent for culture and sensitivity to guide post-operative antibiotic selection [13]. Antibiotic selection for PMMA impregnation is guided by pre-operative and intraoperative culture results wherever available. In culture-negative cases (as in Case 3 of our series), empirical broad-spectrum coverage is used. Heat-stable antibiotics suitable for PMMA mixing include vancomycin, tobramycin, and gentamicin, with combination regimens commonly employed for MRSA-positive cases. Post-operative systemic antibiotic therapy for 6 weeks (3 weeks intravenous followed by 3 weeks oral) parallels the protocol described by Solanki et al. [1]. Key selection criteria for this technique include: Infected non-union of a long bone suitable for intramedullary nailing, bone gap ≤2 cm, absence of critical-sized defects requiring segmental reconstruction, and absence of allergy to PMMA or the selected antibiotic. Cases with larger bone gaps, critical soft tissue deficiency, or multiply drug-resistant organisms refractory to PMMA-compatible antibiotics are better served by alternative strategies, such as LRS bone transport or induced membrane technique (Masquelet) [14,15]. Complications encountered in our series included two cases of persistent infection requiring extended antibiotic courses, one case of non-union requiring secondary intervention, and one case of cement debonding managed conservatively. Nail impingement at the fracture site in one patient was managed with post-union nail adjustment. These complication rates align with previously reported series and underscore the importance of meticulous patient selection and technique [16]. Limitations of this study include its small sample size (n = 10), single-institution design, heterogeneous case mix across different long bones and prior treatment modalities, and a variable follow-up period. A controlled comparative study against staged procedures or LRS bone transport would more definitively establish the superiority of this technique. Nevertheless, our series provides valuable real-world evidence from a resource-constrained setting where minimizing surgical stages and implant cost carries particular importance. Conclusion AC-CIMN is a technically feasible and clinically effective single-stage strategy for infected non-union of long bones with bone gaps ≤2 cm. By simultaneously addressing infection control and mechanical stability, it reduces the total number of surgical interventions compared to conventional staged protocols and enables earlier patient mobilization. Culture-guided antibiotic loading of PMMA, meticulous medullary debridement, and appropriate patient selection are critical determinants of success. Larger prospective studies comparing this technique with staged protocols and external fixation strategies are warranted to establish definitive evidence-based indications. Clinical Message Antibiotic cement-coated intramedullary nailing offers a viable single-stage solution for infected non-union of long bones with bone gaps not exceeding 2 cm, combining effective local antimicrobial delivery with immediate mechanical stability and permitting early patient mobilization. Conflict of Interest: Nil Source of Support: Nil Consent: The authors confirm that informed consent was obtained from the patient for publication of this article Biography References