A theranostic wearable laser-induced graphene-hydrogel dressing for synergistic treatment and real-time monitoring of dermatophytosis Authors: Luojia Chen, Zihao Li, Chao Shen, Si-Ling Chen, Le Cheng, Weiran Niu, Yuncong Yuan, Yidan Zhou, Jie Li, Jiansheng Su, Nan Lin, Shi Chen, ZhongMeng Lai, Ruquan Ye, Meijia Gu Published: 2026 ABSTRACT AbstractThe complexity, high recurrence rate, and need for long-term monitoring in dermatophytosis treatment underscore the demand for high-performance antifungal strategies. Here, we present a theranostic wearable hydrogel dressing (LIG+ITZ@PCS hydrogel) that integrates laser-induced graphene (LIG) with co-encapsulated itraconazole (ITZ) for synergistic therapy and real-time monitoring. This platform features a cationic LIG+ surface (+43.1 mV) for targeted fungal capture. Sunlight exposure induces a mild photothermal effect (∼45°C), which enables the controlled release of ITZ. The combined action of photothermal therapy (PTT) and ITZ inflicts multimodal injury on Trichophyton rubrum (T. rubrum), inducing ferroptosis along with other cellular damage mechanisms. This mechanism achieves T. rubrum eradication and biofilm disruption without recurrence in murine models. The conductive LIG network facilitates real-time, smartphone-based tracking of fungal load through voltage signals. Furthermore, LIG+ITZ@PCS hydrogel exert a powerful modulates immune microenvironment effect. This intelligent system, which integrates low-temperature phototherapy, immunotherapy, and real-time sensing, offers a comprehensive platform for dermatophytosis management.Keywords: Smart wearable, Laser-induced graphene, Trichophyton rubrum, Ferroptosis, Digital monitoring Introduction The population aging and global pandemics highlight the need for more accessible and affordable health monitoring solutions. Recent advances in stretchable and wearable technologies [1] have led to more affordable and functional wearable and digital monitoring devices [2,3]. By utilizing ultrathin and soft materials, wearable devices can interact with human body to monitor physiological signals with high fidelity [4]. Current reported composites show potential in sensing physiological conditions such as pH, temperature, oxygenation, impedance and motion changes in wounds [5]. Composites have been applied as a variety of wound patches depending on the forming structure, such as microneedles (MNs), hydrogels, microcapsules, microspheres, and fibers [6]. Besides, the utilization of specialized carrier systems, in which topical antifungal agents are conjugated with carriers such as liposomes and nanostructured lipids, enhance their skin permeability and bioavailability. Such strategies hold promises for the development of novel formulations of topical antifungal agents, thereby improving therapeutic efficacy and enhancing patient compliance [7,8] (see Scheme 1). Schematic illustration of the LIG + ITZ@PCS hydrogel for theranostic management of dermatophytosis. The cationic LIG + surface captures T. rubrum, while sunlight triggers mild photothermal heating (∼45°C) and controlled ITZ release, inducing ferroptosis and multimodal fungal killing. The conductive LIG network enables real-time smartphone-based monitoring of fungal load, and the dressing further modulates the immune microenvironment to promote tissue repair. Dermatophytosis is a pervasive global fungal infection, which affects over 70% of people irrespective of age or sex. Tinea pedis, represents at least 50% of foot abnormalities, is a contagious fungal skin infection of feet caused by dermatophytes. Its prevalence has surged among aging and immunocompromised populations, emerging as a widespread public health challenge [9]. Onychomycosis (nail fungus), which occurs in approximately 30–59% of tinea pedis cases, causes nail to become thick, yellow and show white spots and streak [10]. Even though it is not life-threatening, approximately 50% of individuals with tinea pedis report experiencing pain or other forms of discomfort, leading to a diminished patients' quality of life [11]. The most prevalent and predominant causative pathogen of tinea pedis is Trichophyton rubrum (T. rubrum), which can invade keratinized tissues in immunocompetent individuals. Despite great efforts on the development of novel antifungal agents, effective antifungal drugs are still lagging behind [12,13]. This is because fungi share similar enzymes and biochemical pathways with humans, resulting in a very limited number of unique targets that can be effectively utilized for antifungal development [14]. Currently, treatments for tinea pedis mainly include topical antifungals, oral antifungals, or a combination of both [15]. Nevertheless, treatment with these pharmacological agents often requires long-term administration [16]. This may result in adverse effects such as drug resistance, gastrointestinal upsets, hepatotoxicity and congestive heart failure [16]. These potential side effects can lead to psychological concerns among patients, thereby affecting the use of oral drugs [17]. Laser-induced graphene (LIG) has emerged as a versatile platform for monolithically integrated, multifunctional, and stretchable bioelectronics, owing to its tunable physicochemical properties and unique 3D porous architecture [18]. This architecture combines high conductivity and large specific surface area, optimizing mass transport and charge transfer efficiency [19]. These attributes are indispensable for advanced sensor systems capable of simultaneous physical, chemical, and electrophysiological signal monitoring [20,21]. In addition to its conductivity, mechanical flexibility and biocompatibility further position LIG as a pivotal material for next-generation wearable biosensors [22]. However, most fabrication routes rely on flexible polyimide (PI) substrates or thick elastic films, owing to the mechanical constraints associated with transferring LIG onto soft elastomers [23]. The development of LIG-based dressing that combines ultrathin structural characteristics with robust stretchability remains a significant challenge [23]. To address these limitations, strategies integrating LIG with stimuli-responsive hydrogels have emerged. Hydrogels, characterized by their hydrated 3D crosslinked networks, combine softness with excellent tissue compatibility, rendering them ideal candidates for flexible and wearable bioelectronic interfaces [24]. Their intrinsic properties, nontoxicity, biodegradability, biocompatibility, and antimicrobial activity, further extend their utility for applications such as wound healing, hemostatic materials, sealants, wearable devices, and drug carriers [[24], [25], [26], [27]]. Recent advances underscore this potential. Graphene-polyacrylic acid composite hydrogels demonstrate enhanced compressive strength and conductivity without compromising biocompatibility [28]. Poly(N-isopropylacrylamide) (PNIPAAm)-based hydrogels enable temperature-controlled drug release [29,30]. Further functionalization with chitosan (CS), a polysaccharide bearing protonated amino groups that disrupt microbial membranes, enables antimicrobial activity and enhanced mechanical stability through hydrophobic modification of d-glucosamine units [31,32]. Such hybrid systems synergize LIG's electronic capabilities with hydrogels' biocompatibility and controlled drug delivery, advancing multifunctional wearable platforms [33,34]. Here, we have developed an intelligent multifunctional wearable cutaneous fungal dermatosis treating/monitoring system, defined as LIG+ITZ@PCS hydrogel. The hydrogel contains LIG functionalized with quaternary pyridinium cations (denoted as LIG+) [35], which helps T. rubrum capture through electrostatic interactions. By further leveraging the broad solar spectrum absorption property of LIG, sunlight can activate photothermal therapy (PTT) and trigger controlled ITZ release, which induces T. rubrum ferroptosis and biofilm disruption. In addition, the voltage signals across the LIG surface can reflect the fungal concentrations at the nidus of foot. By transmitting voltage signals to smartphones, it enables real-time monitoring of treatment. Furthermore, the LIG+ITZ@PCS hydrogel can reshape the immune microenvironment, reduce inflammation, and avoid the occurrence of pain-related depressive behaviors. The easy-to-use and stable antifungal performance of LIG+ITZ@PCS hydrogel dressings show great potential for advantages in home health care, self-monitoring, and sustainability. Results Mechanical, adhesive properties, and T. rubrum capture performance The multifunctional LIG+ ITZ@PCS hydrogel was fabricated through a sequential strategy integrating surface engineering, drug loading, and hydrogel assembly (Fig. 1A). The process began with the quaternization of the LIG surface, which transformed the originally negatively charged surface potential into a highly positive state. Zeta potential measurements (n = 5) confirmed this modification, showing a shift from −14.5 ± 0.5 mV for pristine LIG to +43.1 ± 1.9 mV for LIG+ (Fig. 1B). This quantitative shift from negative to positive confirms the successful introduction of cationic groups onto the LIG surface. Subsequently, ITZ was co-encapsulated using a eutectic fatty acid mixture of lauric acid (LA) and stearic acid (SA). Differential scanning calorimetry (DSC) analysis revealed that the eutectic system markedly lowered the melting point of the fatty acids, thereby reducing the release threshold for ITZ and enabling sunlight-triggered photothermal therapy under mild conditions (Fig. 1C). The positively charged LIG+ITZ was subsequently delaminated from the PI substrate and transferred onto the surface of the polyacrylamide/chitosan (PAAm/CS) hydrogel, yielding the final composite structure, LIG+ITZ@PCS (Fig. 1D). Fourier-transform infrared spectroscopy (FTIR) was further performed to characterize the chemical composition of the PAAm/CS hydrogel (Fig. S1). The characteristic absorption bands confirmed the successful incorporation of PAAm and chitosan components [36], supporting the formation of the hydrogel matrix used for integration. This configuration endowed the LIG+ layer surface to have the ability to treat and efficiently capture negatively charged fungal structures, while the hydrogel provided a soft, biocompatible support. Fabrication, structural design, mechanical performance, and fungal capture capability. (A) Schematic illustration of the fabrication process of LIG+ITZ@PCS hydrogel. (B) Zeta potential of pristine LIG and quaternized LIG+, confirming successful surface cationization. (C) DSC curves of lauric acid (LA), stearic acid (SA), and their eutectic mixture showing a reduced melting point that facilitates ITZ release. (D) Schematic diagram of the LIG+ITZ@PCS hydrogel composition. (E) Tensile stress–strain curves of hydrogel, LIG@PCS hydrogel, and LIG+ITZ@PCS hydrogel showing comparable elasticity. (F) Cyclic compression tests of the LIG+ITZ@PCS hydrogel. (G) Photographs of LIG+ITZ@PCS hydrogel adhered on porcine skin under different types of external deformations before. Scale bars: 2 cm. (H) Photos of the bending of LIG+ITZ@PCS hydrogel. Scale bars: 2 cm. (I) Photograph of LIG+ITZ@PCS hydrogel placed on human skin. (J) Swelling ratios of hydrogel, LIG@PCS hydrogel, and LIG+ITZ@PCS hydrogel immersed in PBS during 50 h (n = 3). (K) Schematic of T. rubrum capture by quaternary pyridinium groups on LIG + ITZ@PCS hydrogel. (L) The capture rate of T. rubrum by hydrogels. (M) SEM images (pseudocolor) of LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel and LIG+ITZ@PCS hydrogel capturing T. rubrum. Scale bar: 20 μm. The data are presented as the means ± SDs, and p values were analyzed by one-way ANOVA with GraphPad Prism software. n.s., not significant; *p < 0.05; **p < 0.01; ***p < 0.001; ****p < 0.0001. Both of LIGITZ@PCS and LIG+ITZ@PCS hydrogel dressings demonstrated a remarkable stretchability, extending up to 4.5 times their original length (Fig. S2). Beyond tensile deformation, compressive testing was conducted to further evaluate their mechanical robustness. The stress–strain profiles revealed that the incorporation of the LIG+ITZ layer exerted negligible influence on the intrinsic elasticity of the hydrogel (Fig. 1E). Moreover, cyclic compression tests confirmed excellent fatigue resistance and self-recovery, as the curves remained nearly overlapping over ten successive loading–unloading cycles without noticeable stress decay (Fig. 1F). To further evaluate the mechanical suitability of the hydrogel for wearable applications, adhesion and cyclic deformation tests were conducted (Fig. S3). The lap shear and peel tests showed stable interfacial adhesion and resistance to peeling-induced detachment, while cyclic tensile loading–unloading tests indicated reproducible tensile behavior under repeated deformation. These results indicate that the hydrogel maintains stable adhesion, mechanical compliance, and deformation tolerance, supporting its use as a wearable sensing/treatment interface. We utilized scanning electron microscopy (SEM) to observe that the LIG+ITZ@PCS hydrogel forms a highly conformal biointerface with porcine skin (Fig. S4, SEM image of pristine hydrogel shown in Fig. S5). Additionally, we performed a series of external force tests to further evaluate the stability of its adhesion performance. (Fig. 1G and Fig. S6). These tests include stretching, twisting and bending, washing, and turning, aiming to evaluate the tensile strength, fracture toughness, elastic recovery ability, durability, and stability of hydrogels in simulating human motion. Throughout these manipulations, the hydrogel and LIG+ITZ@PCS hydrogel remained firmly adhered to the pig skin without any signs of separation. This indicates that the LIG+ITZ@PCS hydrogel can maintain stable adhesion even under complex mechanical stress in practical applications, laying a solid foundation for the development of high-performance wearable devices. Additionally, the robust mechanical properties of LIG+ITZ@PCS hydrogel allowed it to be bent into various angles (Fig. 1H and Fig. S7). Notably, the LIG+ITZ@PCS hydrogel achieves conformal adhesion to dynamically bending plantar skin and toe surfaces, synchronizing with epidermal strain gradients during foot motion (Fig. 1I). This flexibility is particularly significant as it fulfills the requirement of wound dressings in dynamic human feet skin locations that experience high-frequency movements. The ability of this hydrogel to maintain its structural integrity while accommodating these movements ensures that it can provide effective protection for wounds without causing discomfort or restricting mobility. The high water-absorbing capacity of hydrogels is particularly important. Hydrogels can rapidly absorb excess tissue exudate, reducing the local moist environment, thereby inhibiting the growth of fungi and bacteria. To this end, we have studied the swelling ratio of the hydrogels (Fig. 1J). The swelling ratios of the three types of hydrogels are essentially consistent, which proves that the loading of LIG does not affect the water-absorbing property of the hydrogels. In the first 30 min, the hydrogels absorb water rapidly, with swelling rates of approximately 625%, 509%, and 494%, respectively. After 25 h, the swelling ratio stabilizes. It is evident that LIG+ITZ@PCS hydrogels possess excellent and sustainable hygroscopic properties, capable of absorbing the excess tissue exudate caused by Tinea pedis. To evaluate the capture capacity of the hydrogel, we incubated the hydrogel with T. rubrum for 1 h and monitored the OD600 of T. rubrum in the supernatant at different time (0 min, 30 min, 60 min). As shown in Fig. 1K, L and Fig. S8A, the OD600 values of all groups decreased with the extension of incubation time. In particular, the LIG+@PCS hydrogel and LIG+ITZ@PCS hydrogel had OD600 values of only 0.16 and 0.12 in the supernatant at 60 min, while the control groups LIG@PCS hydrogel and LIGITZ@PCS hydrogel had OD600 values of 0.58 and 0.54, respectively. Importantly, this efficient capture capability was maintained under conditions simulating the acidic skin microenvironment (pH: 5.5) (Fig. S9). This indicates that the cationic hydrogel has a significant capture effect on T. rubrum. Furthermore, we performed SEM observations on the surface of the hydrogel after 60 min of incubation. As shown in Fig. 1M and Fig. S8B, the LIG+ITZ@PCS hydrogel adsorbed a significantly higher number of T. rubrum. Comparative analysis revealed a more dispersed distribution pattern of T. rubrum colonies in the ITZ-containing group compared to the LIG+@PCS hydrogel. This phenomenon may be attributed to the antifungal mechanism of ITZ, which specifically inhibits the biosynthesis of ergosterol [37]. The resulting membrane destabilization significantly reduces extracellular polymeric substance (EPS) secretion, thereby compromising the structural integrity of fungal aggregates and establishing a critical precondition for enhanced antimicrobial efficacy. The strong capture capacity of the LIG+ITZ@PCS hydrogel provides a solid foundation for the subsequent effective exertion of antifungal effects. LIG + ITZ@PCS hydrogel eradicates T. rubrum via ferroptosis LIG+ITZ@PCS hydrogel integrates temperature-responsive microgels for controlled ITZ release. Under 1.5 sunlight, the surface reaches approximately 33°C within 5 min and become stabilized at 45°C over 20 min (Fig. S10). This “comfort heating” program can maximize the patient's compliance. Crucially, the temperature-sensitive microgels initiate ITZ release at 37°C (near physiological temperature), enabling precise drug liberation at the infection site (Fig. S11). Furthermore, the controlled-release characteristics of ITZ remained relatively stable with increasing temperature and no significant degradation of the hydrogel was observed in the simulated acidic skin microenvironment (pH 5.5), demonstrating the robustness of the drug delivery system and its suitability for the physiological environment (Fig. S12). We evaluated the antifungal effect of LIG+ITZ@PCS hydrogel dressing on planktonic T. rubrum with a live & dead viability/cytotoxicity assay kit. Compared to the control and hydrogel without irradiation, the LIGs (LIG@PCS, LIG+@PCS, LIGITZ@PCS, LIG+ITZ@PCS) hydrogel showed much redder staining, indicating that more T. rubrum were killed by the LIGs (Fig. S13). Notably, the antifungal efficacy of the LIG+ITZ@PCS reached as high as 100% with sunlight exposure, highlighting the synergy of photothermal effect and electrostatic interactions. However, there was only a small portion of red fluorescence from the single treatment of 2.0 μg mL−1 ITZ group irrespective of irradiation. This may be attributed to the time-dependent pharmacological properties of ITZ [38]. Current research indicates that accurate evaluation of its minimum inhibitory concentration (MIC) in vitro typically requires sustained action for over 7 days, whereas a brief 30 min exposure period is far from sufficient [39]. As shown in Fig. S14, the antifungal efficacy of the LIG+ITZ@PCS hydrogel dressings was further determined by evaluating its capacity to inhibit the growth of T. rubrum using the plate counting method. Under sunlight irradiation, neither the control group nor the hydrogel group showed any observable antifungal effect. While the LIG@PCS group and the ITZ group exhibited an inhibitory effect on the growth of T. rubrum, the antifungal efficacy of the LIG+ITZ@PCS group was significantly stronger in comparison. Besides, SEM was also employed to investigate the synergistic killing effects of LIG+ITZ@PCS (Fig. S15). Without light irradiation, T. rubrum showed oval in shape with a dense and homogeneous cytoplasm and an intact cell wall in the dark groups of control, hydrogel and LIG@PCS. After the application of sunlight irradiation, T. rubrum treated with LIG+@PCS, LIGITZ@PCS and LIG+ITZ@PCS presented irregular and shrunken shapes, with cracks and cellular contents leaking as observed. Transmission electron microscopy (TEM) further elucidated the impact of LIG on the internal structures of T. rubrum. As shown in Fig. 2A, the T. rubrum in the light-control group were oval in shape with a dense and homogeneous cytoplasm and an intact cell wall (186.10 mm), and the mitochondria have normal morphology. However, for T. rubrum treated with LIG + ITZ@PCS group, T. rubrum conidia exhibited a characteristic circular morphology, with their cell walls displaying abnormal thickening (reaching 359.80 mm) accompanied by localized rupture (indicated by red circles), resulting in the leakage of intracellular contents. For filamentous fungi, excessive thickening of the conidial cell wall significantly increases rigidity, thereby compromising the elastic deformation capacity of the wall, ultimately leading to diminished budding and hyphal extension capabilities [40]. Furthermore, the LIG+ITZ@PCS group showed a marked increase in the secretion of Extracellular Vesicles (ECVs). This phenomenon correlates with the cell wall damage-repair mechanism [41]. The DiOC2(3) (3,3′-Diethyloxacarbocyanine iodide) fluorescent probe was used to assess membrane potential changes across treatment groups [42]. The LIG+ITZ@PCS group under sunlight irradiation exhibited the lowest red/green fluorescence ratio (0.27), indicating the most significant reduction in membrane potential (Fig. S16). LIG + ITZ@PCS hydrogel eradicates T. rubrum via ferroptosis. (A) TEM images of T. rubrum after different treatments (pseudocolor of mitochondria). Scale bar: 500 nm. (B) Volcano plot highlighting significantly up-regulated (in purple) and down-regulated (in blue) genes. (C) GSEA revealed that glutathione metabolism and ABC transporters were downregulated in T. rubrum treated with LIG + ITZ@PCS hydrogel. (D) GO enrichment analysis of significantly differentially expressed genes shows that LIG+ITZ@PCS hydrogel exerts substantial multi-target regulatory effects on pathogenicity progression and drug resistance mechanisms. (E) The heatmap shows the expression profile of genes in T. rubrum. (F) GO chord plot shows that several important T. rubrum related genes are categorized into different clusters. (G) CLSM images of T. rubrum stained with cell ferrous iron (Fe2+) probe after treated with different group of hydrogels. A 561 nm laser and 570-620 nm emission filters for Fe2+. Scale bar: 20 μm. (H) The GSH level changes of T. rubrum after treatment with different hydrogels under sunlight irradiation (n = 3). (I) Relative RNA expression levels of NOX (n = 3). J) Schematic diagram of LIG+ITZ@PCS hydrogel-induced T. rubrum ferroptosis. The data are presented as the means ± SDs, and p values were analyzed by one-way ANOVA with GraphPad Prism software. n.s., not significant; *p < 0.05; **p < 0.01; ***p < 0.001; ****p < 0.0001. These phenomena suggesting us the synergistic lethal effect may occur through ferroptosis [43,44]. In ferroptosis, there is usually an mitochondrial dysfunction [45]. As mitochondrial membrane potential (MMP) reflects mitochondrial function, we next determined the MMP by using JC-1 probe [46], which shows a higher red-to-green fluorescence ratio for greater mitochondrial membrane polarization. The results indicated that the MMP was significantly decreased after LIG+ITZ@PCS treatment with light, as evidenced by an increased ratio of green to red fluorescence. (Fig. S17). Given the evident impaired in T. rubrum mitochondrial, which is likely to impact mitochondrial ATP synthesis. After irradiation, the ATP level from LIG+ITZ@PCS only 11% of normal ATP amount (Fig. S18). To further investigate the antifungal mechanism of LIG+ITZ@PCS hydrogel against T. rubrum, we performed gene transcriptome sequencing to analyze the global gene expression profile of T. rubrum following treatment with LIG + ITZ@PCS hydrogel under sunlight irradiation (Fig. S19 and S20). Principal Component Analysis (PCA) and a sample correlation clustering heatmap demonstrated a significant separation between the LIG+ITZ@PCS hydrogel treatment and the control group, alongside high intra-group correlation among biological replicates (Fig. S21 and 22). Hierarchical clustering analysis of differentially expressed genes (DEGs) across treatment groups is presented in Fig. S23. Volcano plot analysis identified 95 significantly upregulated genes and 305 significantly downregulated genes (|log2FoldChange|>1, P-value<0.05) in T. rubrum treated with LIG + ITZ@PCS hydrogel under sunlight irradiation compared to the control group (Fig. 2B). These findings demonstrate that LIG+ITZ@PCS hydrogel exerts substantial multi-target regulatory effects on genes associated with T. rubrum pathogenicity progression (including biofilm formation, host immune evasion, and morphological transition) and drug resistance mechanisms. Kyoto Encyclopedia of Genes and Genomes (KEGG) and Gene Set Enrichment Analysis (GSEA) pathway enrichment analysis of DEGs revealed that LIG+ITZ@PCS hydrogel significantly modulated several metabolic pathways in T. rubrum, including glutathione metabolism, ABC transporters, aspartate and glutamate metabolism (Fig. 2C and Fig. S24). Notably, these pathways have been critically implicated in ferroptosis mechanisms [47,48]. Gene Ontology (GO) annotation analysis indicated that the antifungal effect of LIG+ITZ@PCS hydrogel under sunlight irradiation primarily involved key biological processes, including response to chemical stress, sulfite reductase activity and lipid peroxidation (Fig. 2D). Ferroptosis is a form of regulated cell death, characterized by iron overload, accumulation of lipid reactive oxygen species (ROS), and depletion of glutathione (GSH) [49]. The accumulation of Fe2+ is one of the cardinal indicators of ferroptosis. Among iron metabolism-related proteins, expression of the iron/copper reductase transmembrane component B (FreB) is enhanced. Upregulation of the FreB gene accelerates the reduction of Fe3+ to reactive Fe2+, thereby promoting intracellular accumulation of labile iron. Concurrently, expression of the iron transport oxidase gene (FET3) is suppressed (Fig. 2E and F and Fig. S25). This collectively disrupts the redox balance of intracellular iron and impairs normal iron metabolism [50]. The accumulation of Fe2+ is one of the cardinal indicators of ferroptosis. During this process, Fe2+catalyze the Fenton reaction, generating hydroxyl radicals that markedly elevate the levels of oxidative stress within the cell, thereby precipitating cellular damage. We monitored the intracellular levels of Fe2+ within T. rubrum. As illustrated in Fig. 2G and Fig. S26), a significant accumulation of Fe2+ in T. rubrum cells treated with LIG + ITZ@PCS. Another critical factor triggering ferroptosis is the depletion of glutathione (GSH) levels. During the process of ferroptosis, the cellular antioxidant system is compromised, leading to a decrease in GSH levels and a concomitant increase in intracellular oxidative stress [51]. As expected, genes associated with glutathione synthesis (gedE/GST3/gstk-1/gsa1/MGST) were uniformly downregulated. This indicates partial oxidation of intracellular GSH to GSSG in T. rubrum, which may trigger ferroptosis. We conducted assays to measure the intracellular GSH levels in T. rubrum. The results indicated that the GSH levels in T. rubrum treated with LIGs were significantly reduced, with the LIG+ITZ@PCS treatment group exhibiting the lowest GSH levels (only 0.21) (Fig. 2H and Fig. S27). This suggests that LIG+ITZ@PCS can effectively synergize the actions of PTT and ITZ to substantially deplete GSH, thereby enhancing T. rubrum oxidative damage. Reduced GSH levels lead to accumulation of reactive oxygen species (ROS) and promote lipid peroxidation. We observed significantly elevated expression of the NADPH oxidase (NOX) gene NOX1. In eukaryotic organisms, NOX is involved in a multitude of physiological metabolic processes and cellular differentiation events [52]. NOX can be activated by lipid peroxidation products that accelerates the depletion of GSH and enhances cellular sensitivity to ferroptosis [53]. Quantitative real-time PCR (qRT-PCR) validated the RNA-seq results, LIG+ITZ@PCS significantly upregulated NOX expression by 12.95-fold (Fig. 2I, Fig. S28 and Table S1). Mitochondria, as the primary site for iron utilization, can have their function impaired by abnormalities in iron metabolism. Expression of the iron-sulfur cluster binding gene (sreA) and mitochondrial respiration-related genes (RCF2/ccp1/mcfO/MDM35) was suppressed. Impaired iron-sulfur cluster synthesis consequently induces mitochondrial dysfunction, reducing protein levels of mitochondrial respiratory chain complexes and impairing respiratory function, which correlates with mitochondrial structural damage observed via TEM. To further validate whether ferroptosis occurred in T. rubrum, the fungal conidia were pre-incubated with the Ferrostatin-1 (Fer-1) solution, followed by treatment with different hydrogel groups (LIG+ITZ@PCS, LIGITZ@PCS, LIG+@PCS, LIG@PCS, ITZ@PCS) under both light and dark conditions. The rescue experiment demonstrated that the ferroptosis inhibitor Ferrostatin-1 (Fer-1) could significantly inhibit the cell death of T. rubrum induced by the LIG + ITZ@PCS hydrogel treatment. The potent antifungal efficacy of the LIG+ITZ@PCS hydrogel under sunlight irradiation was attenuated in the Fer-1 pre-treated group, with the viability rate increasing by approximately 42% compared to the non-inhibited control (Fig. S29). This partial rescue of cell death upon specific ferroptosis inhibition provides direct evidence confirming the occurrence of ferroptosis in T. rubrum. Crucially, the LIG+ITZ@PCS hydrogel with light group retained substantial antifungal activity even with Fer-1, consistent with its designed multimodal action combining photothermal therapy and ITZ release. We further observed that LIG+ITZ@PCS hydrogel significantly downregulated heat shock factor (HSF) HSF2 and heat shock protein (HSP) genes (HSP90/HSP60/HSP70). This phenomenon is likely mediated by LIG's exceptional photothermal conversion efficiency. In eukaryotes, thermoadaptive responses are HSF-dependent [54]. Specifically, HSP inhibition may compromise conidiation, development, hyphal growth, attenuates stress adaptation and disrupts mitochondrial chaperone function [[55], [56], [57]]. These alterations impair T. rubrum's self-repair capacity, thereby affecting the functions of the chitin synthase genes (CHS2/CHS7). Given that the LIG+ITZ@PCS hydrogel contains ITZ, we found that key ergosterol biosynthesis genes were significantly downregulated. This includes ERG26, which encodes C-3 sterol dehydrogenase/C-4 decarboxylase (a crucial enzyme for the C-4 demethylation step), and ERG10A/ERG10B, encoding cytoplasmic acetyl-CoA acetyltransferase that catalyzes the pathway's initial reaction. This transcriptional repression directly aligns with the pharmacological action of ITZ and potently disrupts fungal cell membrane integrity and function [58,59]. Suppressed expression of these genes impairs sporulation integrity, sporangium development, and hyphal elongation, ultimately attenuating fungal virulence [60]. This observation aligns with experimentally documented fungal plasma membrane fragmentation. Furthermore, key genes regulating cytoskeletal organization and polarity (arc3/ARC15/PAN1) were significantly suppressed. Their functional impairment directly obstructs actin polymerization and polarized growth at hyphal tips, triggering aberrant budding and cytoskeletal disorganization [61]. Downregulation of these genes induced pseudohyphal regulatory dysfunction (reduced stuA and increased hat1 expression), inhibiting hyphal extension. Consequently, biofilm-associated genes (ace2/SNF1/snf21) are downregulated, diminishing biofilm formation capacity. The development of hyphal facilitates rapid immune evasion [62], LIG+ITZ@PCS hydrogel treatment significantly suppressed host escape-related genes (yap1/SUB2/SSD1). Additionally, efflux pump genes (patC/MFS2/aurT/dotC/atnC/crf2) were suppressed, including drug resistance genes including multidrug resistance transporters (MDR1/MDR2/MDR3) and ABC transporters (abcB/abcI). In conclusion, our research has demonstrated that LIG+ITZ@PCS hydrogel exerts potent antifungal activity against T.rubrum synergized by photothermal therapy and ITZ interactions (Fig. 2J). LIG+ITZ@PCS hydrogel orchestrates iron dyshomeostasis, triggering Fe2+ accumulation and Fenton reactions, which leads to ferroptosis. Concurrent depletion of GSH and downregulation of glutathione synthesis genes disrupt redox balance, while NOX1 overexpression amplifies ROS generation and lipid peroxidation. Mitochondrial dysfunction is evidenced by cristae fragmentation, ATP depletion, and impaired respiration chain gene expression. The hydrogel further compromises fungal virulence by suppressing HSP, cytoskeletal organizers, and biofilm formation genes. Crucially, it overcomes resistance by inhibiting efflux pumps and multidrug transporters, while blocking immune evasion. LIG + ITZ@PCS hydrogel in eliminating T. rubrum biofilms and destroying hyphae Emerging evidence of the role of biofilm in diseases may account for antifungal drug resistance and increased virulence [63]. Consequently, efficacious antifungal agents must not only suppress the proliferation of planktonic fungi but also effectively eliminating mature biofilm [64,65]. We validate the RNA-seq results showing downregulation of biofilm formation-related genes and inhibition of hyphal growth. When T. rubrum was pre-treated with LIG+ITZ@PCS under sunlight, the formation of biofilm was significantly inhibited. In contrast, biofilm formation still occurred when T. rubrum was treated with LIGs alone or ITZ alone (Fig. S30). The crystal violet staining results provided further confirmation of this result (Fig. 3A, B and Fig. S31). LIG + ITZ@PCS hydrogel in eliminating T. rubrum biofilms and destroying hyphae. (A) Crystal violet staining of biofilms formed after different pretreatment procedures. Scale bar: 250 μm. (B) Quantitative analysis of the fluorescence intensity (A595) (n = 3). (C) Lacto-phenol cotton blue (LPCB) stained hyphal elongation and crossings images. Scale bar: 50 μm. (D) Quantitative analysis of hyphal crossings (n = 3). (E-F) Representative 3D images of T. rubrum biofilms treated with different group of hydrogels, followed by staining with a Viability/Cytotoxicity Assay Kit for Bacteria Cells. A 488 nm laser and a 515–550 nm emission filter were used for NucGreen, while a 561 nm laser and a 570–620 nm emission filter were used for EthD-III. Scale bar: 20 μm. Quantitative analysis of the G) biofilm biomass, H) average thickness, and I) T. rubrum survival rate (n = 3). (J) SEM images of T. rubrum biofilms. The red arrows indicate deformed or broken biofilm structures. Scale bars: 2 μm. (K) Fluorescence intensity of T. rubrum biofilms stained with DCFH-DA after treatment with different hydrogels under sunlight irradiation. The data are presented as the means ± SDs, and p values were analyzed by one-way ANOVA with GraphPad Prism software. n.s., not significant; *p < 0.05; **p < 0.01; ***p < 0.001; ****p < 0.0001. To investigate how LIG+ITZ@PCS reduces the formation of biofilms in T. rubrum, we employed lactophenol cotton blue (LPCB) staining to observe the inhibitory effects of LIGs and ITZ on the hyphal growth and intercrossing in T. rubrum. This approach allowed us to elucidate the mechanisms underlying the observed biofilm inhibition by targeting the critical stages of fungal biofilm development. The development of filamentous fungal biofilms progresses from spore attachment to the formation of small colonies. Subsequently, through hyphal extension and branching, a monolayer extracellular matrix is formed. Eventually, a three-dimensional structure is established via the formation of a hyphal network. Therefore, the interwoven growth of hyphae is one of the primary reasons for the formation of robust biofilms in filamentous fungi. As shown in Fig. 3C, D and Fig. S32, the number of hyphal crossings significantly increased and substantial degree of hyphal showed remarkable elongation and extensive branching, with some even formed dense clusters, was observed in Control and Hydrogel group. In contrast, T. rubrum hyphae crossings in the LIG + ITZ@PCS group was significantly reduced, with only 7 intersection points observed. Additionally, LPCB staining revealed a substantial presence of distressed hyphae (indicated by red arrows) in the LIG+ITZ@PCS group [66]. Distressed hyphae were defined as follows: (i) darkened hyphal walls; (ii) granulated alterations in cytoplasmic structures [66]. These results demonstrate that LIG+ITZ@PCS effectively disrupts T. rubrum spores and suppresses hyphal developmental capacity, with a significant increase in distressed hyphae, through synergistic interactions of inherent electrostatic attraction, PTT, and ITZ. This action consequently impedes hyphal network formation, ultimately exhibiting remarkable efficacy in inhibiting biofilm maturation. This finding further corroborates the RNA-seq results. Compared with the inhibition of planktonic T. rubrum, the elimination of mature biofilms is much more challenging. Conventional antifungal drugs often fail to eliminate biofilms, increasing pathogenicity and drug resistance. This is because fungi in biofilms slow their metabolism and form spores or persister cells due to uneven nutrient distribution, reducing their antibiotic susceptibility. Therefore, the effect of LIG+ITZ@PCS on eradicating mature biofilms was studied. A biofilm model was created by growing T. rubrum on glass slides, EPSs are electronegative due to their components, such as polysaccharides, proteins, nucleic acids, and lipids. Since both of LIG+@PCS and LIG+ITZ@PCS has multiple positive charges, they can bind with EPSs and T. rubrum, thus promoting its adsorption into the biofilm. The 3D images are shown in Fig. 3E and F and Fig. S33. ITZ treatment alone showed negligible killing effect, with strong green and only dim red fluorescence observed. In contrast, the combination of LIG+ITZ@PCS hydrogel with irradiation demonstrated a superior synergistic effect, evidenced by strong red fluorescence and visible holes in the biofilm. The quantitative assessment of biofilm biomass, average thickness, and fungal survival rate demonstrated that the irradiated LIG+ITZ@PCS treatment achieved the lowest values (Fig. 3G–I and Fig. S34). SEM analysis revealed distinct morphological changes in T. rubrum biofilms after various treatments. Control group showed intact hyphae with smooth surfaces, while ITZ treatment caused only minor surface wrinkling without compromising structural integrity. In stark contrast, biofilms treated with irradiated LIG+ITZ@PCS hydrogel exhibited severe deformation, appearing shrunken and collapsed with extensive surface damage, including perforations and fractures (Fig. 3J and Fig. S35), indicating superior biofilm eradication efficacy. We have demonstrated that LIG+ITZ@PCS induces ferroptosis in T. rubrum by exacerbating oxidative stress and depleting GSH, potentially leading to a critical accumulation of intracellular ROS. We employed the fluorescent probe dichlorodihydrofluorescein diacetate (DCFH) to detect ROS levels in biofilms (Fig. 3K and Fig. S36). Compared to untreated biofilms or those treated with ITZ, biofilms treated with LIG+ITZ@PCS under light irradiation exhibited massive endogenous ROS accumulation, with fluorescence intensity up to 2.1-fold higher than the untreated group. Unlike the ROS signals produced by fungi under heat stress, which may ultimately activate protective mechanisms, the ROS storm induced by LIG+ITZ@PCS exceeds cellular tolerance thresholds. It disrupts mitochondrial function, further triggering additional ROS generation and forming a vicious cycle. Consequently, it synergistically achieves efficient eradication of planktonic cells and thorough disruption of stubborn mature biofilms. Wearable devices LIG + ITZ@PCS Hydrogel for Real-time Monitoring and Treatment of Tinea Pedis Recent advancements in wearable biomedical devices are enabling seamless human-machine integration for real-time physiological signal recording and processing [67]. Based on our previous study, the LIG humidity differential generator has been proven to possess the capability of powering commercial low-power-consuming devices [68]. Fungi, as substances bearing negative charges on their surfaces, may disrupt the surface charge gradient of LIG through their accumulation. Ultimately, under high load conditions, this could eliminate the induced potential, thereby endowing it with the potential for fungal monitoring. To further demonstrate the practical use of LIG+ITZ@PCS hydrogel dressing, we explore the use of a LIG+ITZ@PCS hydrogel dressing as a wearable real-time monitoring tinea pedis device (Fig. 4A). Fig. 4B and Fig. S37 illustrate the impact of T. rubrum adhesion on the induced potential. The average induced voltage before and after T. rubrum adheres to the LIG + ITZ@PCS hydrogel is denoted as V0 and V1, respectively. The correlation between V1/V0 and the load of T. rubrum on the LIG + ITZ@PCS hydrogel (expressed as CFU/mL value) is shown in Fig. S38. When the CFU/mL value of T. rubrum on the LIG + ITZ@PCS hydrogel is 3.0 × 106, the average voltage drops to 85.01% of the initial value. When the CFU/mL value of T. rubrum reaches 1.0 × 107, the average voltage drops to 25.17% of the initial value, significantly lower than the initial average induced voltage. The relationship between V1/V0 and CFU/mL can be well described by the linear fitting equation Y = −5×10−6x+98.714 with a coefficient of determination R2 = 0.9921, confirming a strong linear correlation. This result indicates that the LIG+ITZ@PCS hydrogel has the capability to sensitively monitor the concentration of T. rubrum. Wearable Devices LIG + ITZ@PCS Hydrogel for Real-time Monitoring and Treatment of Tinea Pedis. (A) Schematic illustration of smart wearable LIG+ITZ@PCS hydrogel treatment and smartphone monitoring for tinea pedis mouse. (B) Comparison of potential generated before and after different amounts of T. rubrum adhesion. (C-D) Images of the toenails and soles of tinea pedis mouse models after different treatments. (E) The average induced voltage of the tinea pedis mouse model on days 0, 14, and 28 was monitored using Source Meter. (F) The average induced voltage of the tinea pedis mouse model on day 28 was monitored using mobile multimeter. In humans, the feet, particularly the soles and interdigital spaces, represent the most prevalent sites for tinea pedis [69]. The moist, dynamic environment of the feet, along with sweat, promotes T. rubrum growth and adherence to the feet skin. The predominant clinical presentation is intertriginous dermatitis, characterized by maceration, desquamation, and fissuring within the interspaces of the fourth and fifth toes [69]. Considering the efficient abilities irradiated LIG+ITZ@PCS treatment to kill yeasty and hyphae form of T. rubrum, as well as eradicate mature biofilms, the in vivo potential of irradiated LIG + ITZ@PCS hydrogel dressing for tinea pedis treatment was investigated using 12-week-old male C57BL/6 mouse model. Mouse models of tinea pedis were established referred to previous studies with some modifications [70,71]. The mice with tinea pedis were randomly divided into four groups (n = 8): 1) no T. rubrum infection or treatment (Control); 2) no treatment after successful modeling (w/o treatment); 3) affix a 5 mm × 8 mm piece of LIG+ITZ@PCS hydrogel to the sole of the mouse's foot and subject it to sunlight exposure three times a week for 30 min each session. (w/treatment); 4) apply ITZ ointment to the soles of the mice's feet three times a week (ITZ). T. rubrum exhibits keratophilic properties, adhering through conidial contact with the nail plate or keratin. Subsequent spore budding forms invasive hyphae that penetrate the stratum corneum vertically while expanding laterally to induce nail lesions [72]. T. rubrum exhibits keratophilic properties, adhering through conidial contact with the nail plate or keratin. Subsequent spore budding forms invasive hyphae that penetrate the stratum corneum vertically while expanding laterally to induce nail lesions [72]. We took a careful observation of toenail changes (both front and side view) from the above mice. As shown in Fig. 4C and Fig. S39, the primary site of the fungal infection is the nail bed, with a low-grade inflammatory response and progresses to a chronic phase of the nail bed infection as total dystrophic onychomycosis. Onychomycosis also eventually infects the viable nail matrix onychomycosis nail changes. In all tinea pedis mouse models, we observed significant nail involvement, characterized by onychogryphosis, onycholysis, and subungual hyperkeratosis. Particularly in the w/o treatment group, from Day 7 to Day 28, the nail surfaces became rough, with excessive longitudinal ridges, pitting, and excessive thickening due to hyperkeratosis. The nails turned yellowish-brown, with subungual scaling and gradual fragility and splitting at the distal ends. The ITZ group also exhibited subungual scaling, roughness, and fragility, although to a lower extent than the w/o treatment group. In contrast, after treatment with LIG+ITZ@PCS hydrogel dressing, the degree of nail hyperkeratosis, roughness, and luster were significantly improved, trending toward healthier nail appearance. Most untreated or inadequately managed onychomycosis can progress to tinea pedis. Since tinea pedis is a chronic fungal infection of the feet, the pathogenetic features at the early stage is very slow-progressing and not evident [73]. As shown in Fig. 4D and Fig. S40, as the modeling process continued, over time, the w/o treatment group of mice developed macerated, whitish thickened stratum corneum on the soles, with progressively severe desquamation, increasing amounts of dry, scaly skin, leading to cracking, peeling, and even the appearance of blisters on the soles. Following Day 7, ITZ ointment and 5 mm × 8 mm LIG+ITZ@PCS hydrogel were applied or affixed to the soles of the mice, w/treatments administered three times per week. Photographs revealed that, over time, the w/o treatment group of mice developed macerated, whitish thickened stratum corneum on the soles, with progressively severe desquamation, increasing amounts of dry, scaly skin, leading to cracking, peeling, and even the appearance of blisters on the soles. In contrast, although the tinea pedis progression in the ITZ group was less severe than in the w/o treatment group, there was still thickening, dry cracking, and desquamation of the soles, indicating that ITZ could intervene in tinea pedis but was not sufficient for complete cure. However, in the group treated with LIG+ITZ@PCS hydrogel, the appearance of the soles had significantly improved by Day 14, with smoother skin surfaces, markedly reduced cracking and peeling, and initial signs of recovery. Day 21, the inflammation had been significantly alleviated, with almost no erythema or swelling, and negligible desquamation. These results demonstrate the remarkable efficacy of LIG+ITZ@PCS hydrogel in treating tinea pedis. In chronic disease treatment and monitoring, various sensors convert physiological signals into recordable electrical or optical signals, essential for wearable technology. Given the LIG+ITZ@PCS hydrogel has demonstrated a sensitive capacity for monitoring the concentration of T. rubrum in vitro, we further applied the LIG+ITZ@PCS hydrogel to the soles of mice to monitor the concentration of T. rubrum at the affected sites of tinea pedis in mice. Fig. 4E and Fig. S41 shows the changes in the induced potential of the LIG + ITZ@PCS hydrogel on day 1, day 14, and day 28. In the control group, the average voltage changes remained stable between 105 and 110 mV across the three measurements. In contrast, the average voltage in the w/o treatment group continuously decreased, dropping by 43% on day 14 compared to day 1, and by 60% on day 28 compared to day 1. The ITZ group also showed a continuous decline in average voltage, with a decrease of 35% on day 14 and 52% on day 28 compared to day 1. Notably, the average induced voltage in the w/treatment group decreased by 12% on day 14 but gradually recovered by day 28, differing from the average voltage on day 1 by only 9%. These voltage changes correspond well with the progression of tinea pedis in the mice's feet. Excitingly, due to the significant changes in induced potential, detection can be performed using a common commercial multimeter, and the results can be displayed on a smartphone (Fig. 4F and Fig. S42. We employed a flexible LIG+ITZ@PCS hydrogel attached to the plantar lesion area, constructing a wearable sensing system through a wireless multimeter, successfully achieving conformal and lightweight skin attachment and remote real-time monitoring of disease progression parameters. The LIG+ITZ@PCS hydrogel patch was gently applied to the infected foot. Two strips of conductive aluminum tape were attached to the two opposing long edges of the patch, ensuring direct contact with the exposed LIG electrodes. Wires were then clipped onto the extended ends of the aluminum tape to establish a stable electrical interface, thereby allowing for remote, continuous, and conformal monitoring of disease progression parameters. As shown in the Video S1-4, this wearable device can stably convert physiological signals induced by tinea pedis into electrical signals, capturing characteristic potential responses highly correlated with the progression of tinea pedis at the initial stage of signal acquisition. Furthermore, the Wi-Fi-based wireless multimeter demonstrates comparable data stability to the SourceMeter, ensuring measurement accuracy while significantly enhancing monitoring convenience through its portable design (Fig. S43). The proposed platform is cost-effective, with an estimated material cost of approximately 0.7-1.2 USD per disposable LIG/hydrogel sensing and treatment interface under batch-processing conditions, including the PI-derived LIG substrate, hydrogel layer, positively charged surface functionalization, and ITZ-loading components. In addition, signal readout can be performed using a mobile multimeter, which is commercially available for approximately 15 USD, connected to a standard smartphone, avoiding the need for specialized hardware. This wireless biosensing method combining LIG+ITZ@PCS hydrogel with smartphones demonstrates its great potential to become a living biointerface-bioelectronics device, providing an innovative solution for the development of integrated wearable diagnostic and therapeutic devices. The convergence of multiple technologies has not only enhanced the functionality of LIG hydrogel materials but also provided novel approaches for exploring more complex biological processes. The introduction of artificial intelligence (AI) has provided new tools for the design and optimization of LIG hydrogel materials. This connection with smart devices paves the way for subsequent data analysis, interpretation, and prediction of tinea pedis using AI algorithms. AI can predict the electrical signals converted from physiological signals captured by LIG hydrogels, achieving automatic classification and analysis, improving diagnostic efficiency w/o relying on medical institutions or professional healthcare personnel. If the integration of AI and LIG hydrogel technology is realized, it will add significant value to personalized medicine and disease detection. Behavioral Defects in Tinea Pedis Animals Behavioral impairments resulting from abnormal regulation of tinea pedis have been previously described [74,75]. The presenting symptoms in the patients with were predominantly itch, discomfort and even pain (with severe skin cracking) in the foot. Gait disturbances are also frequently observed among patients with related diseases. Therefore, we tested the mice for fine motor coordination and locomotion problems. The analysis of gait is an important tool for measuring and assessing pain or health conditions associated with feet or legs [76]. Mice in the w/o treatment group and ITZ groups exhibited mild gait abnormalities, characterized by increased sway length and stance length, as well as reduced stride length (Fig. 5A, B and Fig. S44). The pain and discomfort from tinea pedis-induced foot inflammation and damage likely impaired the mice's balance control, necessitating gait adjustments such as a wider sway, longer stance time, and shorter stride length to maintain stability. These phenomena suggest that the pain and discomfort caused by inflammation and damage to the foot skin due to tinea pedis significantly impacted the mice's foot sensation and balance control. To maintain balance and stability while walking, the mice likely required a wider sway range and longer stance time, while also shortening their stride length to reduce pressure on the affected feet. As shown in Fig. 5C, the hindlimbs of mice in the w/o treatment and ITZ groups exhibited greater swing amplitudes compared to those in the Control and w/treatment groups, while the forelimbs showed normal swing patterns (since the tinea pedis model was induced in the hind paws). Behavioral Defects in Tinea Pedis Animals. (A) Representative images of control group, w/o treatment group, w/treatment group and ITZ group in the gait test. Forepaw (red) and hindpaw (blue). (B) Quantitative graphs of stride, sway, and stance length in the gait of mice in different treatment groups (n = 8). (C) Representative images of the walking state of mice in different treatment groups. Images (D) and scores (E) of the hind limb clasping of mice in different treatment groups. scoring 0–1 (normal) to 3 (most severe) (n = 8). (F) Representative paths of each group in the OFT. (G) OFT track the heatmap of each group. Quantitative analyses of the H) distance moved, I) velocity, J) mobility state, and K) distance moved in the center (n = 8). The data are presented as the means ± SDs, and p values were analyzed by one-way ANOVA with GraphPad Prism software. n.s., not significant; *p < 0.05; **p < 0.01; ***p < 0.001; ****p < 0.0001. Pain or discomfort produces changes throughout the Central Nervous System, particularly in the area of emotional processing. Therefore, the tail suspension test and open field test (OFT) was employed to study the changes in emotional states related to depression, stress and anxiety due to the feet malaise. In the tail suspension test, mice in the w/o treatment and ITZ groups exhibited varying degrees of hindlimb clenching (Fig. 5D). Upon scoring, the w/o treatment group received a score of 2.84, the ITZ group scored 2.16, the Control group scored 0.6, and the w/treatment group scored 0.96 (Fig. 5E). These results indicate that the health status of the hindlimbs in mice treated with LIG+ITZ@PCS hydrogel approached that of the Control group. Normal healthy mice typically display a certain level of motor activity when suspended, such as spreading their limbs and adjusting their posture. In contrast, hindlimb clenching reflects that w/o treatment or incompletely treated (with ITZ) mice experience foot discomfort, which may lead to behaviors indicative of depressive-like states. Fig. 5F shows representative paths of each group at the end of the test. The OFT results revealed that quantification of the motor activity in the open field significantly differed between the w/treatment group and the w/o treatment group. In the w/o treatment group and ITZ group, the pain in the hind paws led to a more pronounced decline in locomotor activity and greater levels of depressive and stress-related behaviors compared to the w/treatment group. Prior to the formal commencement of the OFT, all groups were subjected to an identical period of habituation. This indicates that the reduced activity stems from locomotion impairments rather than accelerated habituation to the environment. Normal mice typically exhibit both thigmotaxis, characterized by a preference for wall proximity, and exploratory behavior in the center of the open field. As revealed by the heatmaps generated from the OFT tracking, the activity range of mice in the w/treatment group was consistent with that of the Control group, with uniform distribution of movement paths and time spent across the arena. In contrast, mice in the w/o treatment group rarely into the center and predominantly remained in the corners, a pattern indicative of depressive-like behavior (Fig. 5G). To further elucidate the behavioral differences, we quantitatively analyzed the performance of mice in the OFT across all groups. The total distance moved as well as distance moved in center in the w/treatment group was significantly greater than that in the w/o treatment group (2.5 times and 16.83 times greater) (Fig. 5H and I), with a 3.5-fold increase in velocity (Fig. 5J) and a 6-fold greater mobility state (Fig. 5K). Immune Microenvironment Remodeling by LIG + ITZ@PCS hydrogel Tinea pedis, as a common fungal skin infection, is closely related to the imbalance of the immune microenvironment in its recurrent attacks. However, traditional antifungal drugs, such as ITZ, although capable of inhibiting pathogens by disrupting the stability of fungal cell membranes through the inhibition of ergosterol synthesis, have limited effects on modulating the immune microenvironment. This limitation may be a significant reason for the development of treatment resistance. The LIG+ITZ@PCS hydrogel captures T. rubrum on the mouse foot through cationic interactions and generates a photothermal effect under sunlight. In this process, LIG can efficiently convert light energy into heat energy. Meanwhile, the microgels in the hydrogel release ITZ, which works synergistically to exert antifungal effects, destroy and lyse T. rubrum. The efficient capture and subsequent destruction of fungi by the combined therapy lead to the direct release and exposure of fungal antigens, which may promote the release of pathogen-associated molecular patterns (PAMPs) and activate innate immune cells such as macrophage [77]. This provides the initial immunological signal that drives the subsequent changes in immune cell populations. INOS/MMR Immunofluorescence staining revealed that the treatment significantly altered macrophage polarization, shifting the balance from a pro-inflammatory state towards a reparative state. Specifically, the proportion of M1 macrophages (iNOS) decreased from 6.2% in the w/o treatment group to 1.0% in the w/treatment group. Conversely, the proportion of M2 macrophages (MMR) increased to 5.6% following treatment (Fig. 6A and Fig. S45). This shift in macrophage polarization was further corroborated by flow cytometric analysis (Fig. S46). Macrophage polarization is mechanistically linked to the clearance of the fungal burden and the reduction of pro-inflammatory stimuli by the therapy, creating a microenvironment conducive to healing. Immune Microenvironment Remodeling by LIG + ITZ@PCS Hydrogel. (A) Immunofluorescence staining (iNOS staining for M1 macrophages and MMR staining for M2 macrophages) and quantitative analysis (n = 3). Scale bars: 100 μm. (B) Flow cytometry statistics and representative flow cytometry graphs of dendritic cells (DCs) (CD11c+, CD80+ and CD86+) after different treatments in spleen. Representative flow cytometry graphs (C) and Flow cytometry statistics (D-G) of T-cell subsets (CD3+, CD4+, and CD8+) after different treatments in spleen. Images of GMS staining (H) and quantitative analysis (I) of mouse soles after different treatments. Scale bars: 50 μm. (J) Images of H&E staining. The images identify spiny cells (black arrow), hyperkeratosis (blue arrow), fibroblasts (yellow arrow), granulocyte infiltration (red arrow), sweat gland (brown arrow). (K) Percentage of inflammatory cells infiltration in each group. Images of Masson staining (for collagen and muscle fibers) (L) and quantitative analysis (M) of mouse soles after different treatments. Scale bars: 150 μm. (N) Schematic diagram of LIG+ITZ@PCS hydrogel for photothermal anti-inflammatory treatment and immune activation. The data are presented as the means ± SDs, and p values were analyzed by one-way ANOVA with GraphPad Prism software. n.s., not significant; *p < 0.05; **p < 0.01; ***p < 0.001; ****p < 0.0001. The polarization shift of macrophages not only signifies the re-establishment of the inflammation-repair balance but, more crucially, this reshaping of the immune phenotype may form a positive regulatory loop through the maturation of dendritic cells (DCs), thereby activating adaptive immunity. The altered cytokine milieu and the availability of fungal antigens from cleared pathogens, resulting directly from the effective treatment, provide the necessary signals for DC activation and maturation [78]. Flow cytometry data showed that the maturation rate of DCs in the w/treatment group significantly increased to 39.5% (compared to 23% in the w/o treatment group and 28.6% in the ITZ group) (Fig. 6B and Fig. S47). This suggests that the LIG+ITZ@PCS hydrogel, by promoting the maturation of DCs, may accelerate the initiation of a fungus antigen-specific immune response. Mature DCs then migrate to lymphoid tissues, where they present the processed fungal antigens to T cells, establishing a pathway from treatment efficacy to adaptive immune activation[79]. This phenomenon was further validated in subsequent analyses of T-cell subsets: the w/treatment group exhibited significantly higher proportions of CD4+ T cells (47.2%) and CD8+ T cells (30.9%) compared to other groups, with a CD4/CD8 ratio of 1.53 (compared to 1.02 in the w/o treatment group, 1.35 in the ITZ group, and 1.28 in the Control group) (Fig. 6C–G). Grocott-Gomori methenamine silver (GMS) staining results intuitively show that the skin T. rubrum load in the w/treatment group approached that of the Control group, with a significantly higher clearance efficiency than the ITZ group (Fig. 6H and I). In the hematoxylin-eosin (H&E) staining results, the w/treatment group exhibited pathological features such as inflammation, epidermal thickness, and hyperkeratosis that were restored to near-normal levels compared to the healthy control group. In contrast, the w/o treatment group showed markedly thickened epidermis with increased numbers of spinous cells (black arrows) and hyperkeratosis in the stratum corneum (blue arrows). The dermis displayed extensive granulation tissue proliferation composed of fibroblasts (yellow arrows) and fibrocytes, with massive infiltration of granulocytes (red arrows). Although the ITZ group showed some improvement in the degree of abnormality in the stratum corneum, it still exhibited epidermal thickening, increased numbers of spinous cells, and massive infiltration of granulocytes (Fig. 6J and K). The presence of tissue exudate and necrotic tissue from tinea pedis creates a favorable environment for the growth of T. rubrum. The proliferating T. rubrum can lead to secondary infections in the foot, and persistent infection can destabilize the collagen matrix of the dermis, creating a vicious cycle that further delays the tissue repair process. The presence of tissue exudate and necrotic tissue from tinea pedis creates a favorable environment for the growth of T. rubrum. Quantitative results from Masson staining showed that the collagen content in the w/treatment group (40%) was significantly higher than that in the w/o treatment group (17.83%) and the ITZ group (23.83%), indicating that the hydrogel inhibits fungal degradation of collagen and reconstructs the three-dimensional scaffold structure of the skin tissue (Fig. 6L and M). Moreover, we demonstrate the complete resolution of epidermal thickening and hyperkeratosis in the treatment group, as well as the reduction of inflammatory cell infiltration in the dermis observed in the HE staining, were highly consistent with the restoration of collagen content. Throughout this process, the LIG+ITZ@PCS hydrogel reshapes the immune microenvironment of tinea pedis by modulating the three types of different immune cells: (1) regulation of macrophage polarization to balance inflammation and repair processes, (2) promotion of DC maturation and (3) modulation of the ratio of T cell subsets. Consequently, this approach reduces inflammatory responses, breaks the infection-damage cycle, and supports the recovery of the foot skin barrier by repairing the collagen network (Fig. 6N). Clinical application and biocompatibility of LIG + ITZ@PCS hydrogel Inspired by the excellent results above, we further evaluated the antifungal properties of LIG+ITZ@PCS hydrogel dressing in clinical samples from patients with tinea pedis. This investigation included 37 patients (age from 3 to 84 years old; 21 males, 16 females; duration of illness: 3 days-3 years) with dermatosis, including scalp, neck skin fugus toenail, foot dander and so on (Table S2). Among the 37 patients, 24 of them are diagnosed as fugus dermatosis, leaving 13 were not detected any fungal related feature structures. From the SEM image of LIG+ITZ, it exhibits high specific surface area with porous structure. LIG possesses advantageous microporous structure and robust adsorption capacity for organic molecules, widely utilized in water purification processes [80]. Meanwhile, in clinical tooth-whitening, peroxide, such as H2O2 is often employed for oxidizing the stains. Since H2O2 is one of the ROS in PDT, it could be envisioned that LIG+ITZ@PCS with abundant porous structures may be applicable to clearance of toenail and foot skin. Motivated by this idea, we explored the potential of LIG+ITZ@PCS for toenail clearance and antifungal activity. We first tested the antifungal effect on clinical toenail. From all the 37 samples, we selected three fungal samples: No. 6, No. 22, No. 37, collected from patient's chest to toenails, to study the effect in detail (Fig. S48). As shown in Figs. S49 and S50, all the killing rate further indicated the broad application prospects of irradiated LIG+ITZ@PCS hydrogel dressing against dermatosis. Notably, there was no fungi clinically detected in samples No. 2, No. 3, No. 4, No. 10, No. 11, No. 16, No. 19, No. 22, No. 25, No. 26, No. 28, No. 32, No. 35. However, in the subsequent plate culture, fungus-like monoclonal colonies emerged in these samples, indicating the partitive false negative rate in normal clinical detection. Simultaneously, antifungal activity of irradiated LIG+ITZ@PCS hydrogel dressing is very strong, some of them can reach almost 100%. SEM clearly demonstrated that pathogenic fungi treated with irradiated LIG+ITZ@PCS hydrogel dressing undergo morphological tremendous changes (Fig. S50). Most of the fungi were deformed and had collapsed with evident holes on the surface after treatment with LIG+ITZ@PCS with and sunlight, while the untreated fungi maintained regular shapes with an intact, smooth surface and cell walls, indicating the potential of LIG+ITZ@PCS hydrogel dressing in the clinical treatment of dermatosis. LIG possesses advantageous microporous structure and robust adsorption capacity for organic molecules [80]. We evaluated whether LIG+ITZ@PCS is applicable for clearance of toenail and foot skin. Toenail of similar sizes were collected and subjected to w/and w/o treatment, and photographs were taken at irradiation times of 0, 10, 20, and 30 min, respectively (Fig. S51A). To quantitatively assess toenail whitening, the whiteness index (W = L−|a|−|b|) was employed, where L denotes lightness on a perpendicular axis to the chromatic plane [81]. This formula, adapted from prior studies, utilizes chromaticity coordinates a and b within the CIELAB color space. The a-axis corresponds to red-green chromatic attributes, while the b-axis represents yellow-blue chromatic attributes, with both axes encoding saturation and hue characteristics. In the control group, the color of the toenail remained unchanged throughout the experiment, and ITZ exerted limited influence on toenail color. In contrast, the colored toenails treated with the LIG+ITZ@PCS hydrogel dressing exhibited significant whitening, accompanied by pronounced changes of W (Fig. S51B). LIG+ITZ@PCS hydrogel dressing in dark could also whiten the toenail due to its excellent adsorption properties. Therefore, LIG+ITZ@PCS hydrogel showed outstanding toenail whitening performance but was less harmful to the toenail structure. Collectively, LIG+ITZ@PCS hydrogel dressing can clear toenail while disintegrating the fungal biofilm efficiently, making it a potential therapeutic agent for clinical usage. Encouraged by the outstanding performance of LIG+ITZ@PCS hydrogel dressing to treat tinea pedis in vitro and in vivo, we further investigated its biocompatibility for potential application in the clinic. Assessment of cell viability using Calcein AM/PI staining showed a strong green fluorescence and very weak red fluorescence, suggesting a negligible killing effect on MRC-5 cells (Fig. S52). The hemolysis assay results revealed hemolysis rates of 2.51% and 3.52% for LIG@PCS and LIG+@PCS hydrogel, both under the 5% safety threshold (Fig. S53). Although LIG+ITZ@PCS hydrogel and ITZ displayed slightly elevated hemolysis rates (6.57% and 6.64%), marginally exceeding the safety limit, which is likely attributable to ITZ's inherent hydrophobicity compromising erythrocyte membrane stability and causing mild hemolytic. In vivo studies on mice over 30 days revealed no apparent pathological changes in mouse paws via H&E staining (Fig. S54). Furthermore, hematological and biochemical indices, including glutathione transaminase, urea, and creatinine levels, remained within normal ranges (Fig. S55 and S56). These collective results confirm the good biocompatibility of the LIG+ITZ@PCS hydrogel dressing. Conclusions We developed an intelligent wearable hydrogel dressing (LIG+ITZ@PCS hydrogel) that integrates flexible sensing with precise therapeutic functions, offering an innovative solution for the dynamic management of skin fungal infections. The system couples the cationic properties of LIG+ITZ@PCS hydrogel for targeted fungal capture with sunlight-triggered photothermal effects that enable controlled release of ITZ from PNIPAAm microgels at 37°C. This cascade induces mitochondrial damage, Fe2+ overload, ROS accumulation, and GSH depletion in T. rubrum, triggering ferroptosis through lipid peroxidation. As a result, nearly 100% fungal eradication is achieved while concurrently suppressing immune evasion, disrupting biofilm formation, and overcoming drug resistance by inhibiting efflux pumps and MDR transporters. The conductive LIG network further enables real-time and high-precision in situ monitoring by transducing physiological signals into electrical signals via a smartphone with only two electrodes. Additionally, the LIG+ITZ@PCS hydrogel reshapes the immune microenvironment of tinea pedis lesions by modulating the three types of different immune cells: (1) polarizing macrophages to the anti-inflammatory M2 phenotype to suppress excessive inflammation; (2) promoting DCs maturation to enhance antigen presentation; and (3) optimizing the CD4+/CD8+ T cell ratio to restore immune homeostasis, ultimately accelerating skin barrier repair and alleviating pain-related behavioral disorders. This intelligent system, integrating low-temperature therapy, immune modulation, and real-time monitoring, establishes a new paradigm for dermatological diagnosis and treatment. Beyond fungal infections, the platform shows great potential in addressing multidrug-resistant pathogens and promoting the healing of chronic wounds, thereby extending its utility to broader dermatological and wound-care applications. Future directions include incorporating wireless communication and artificial intelligence to construct autonomous and personalized diagnostic–therapeutic systems that function outside conventional medical institutions. By uniting LIG–hydrogel engineering, immune regulation, and wearable electronics, this work opens new avenues for precision and intelligent dermatological care. Methods Materials and general instruments All chemical reagents were obtained from J&K Scientific and used without further purification. General laboratory chemicals used for LIG surface modification and hydrogel preparation, as well as itraconazole (ITZ), were purchased from Aladdin (Shanghai, China). Itraconazole (ITZ) was obtained from Aladdin. Minimum essential medium (MEM) was purchased from Gibco. PBS, penicillin and streptomycin were purchased from Invitrogen. Fetal bovine serum (FBS), trypsin-EDTA, yeast extract and tryptone were obtained from Thermo Fisher Scientific. NaCl was obtained from Sinopharm Chemical Reagent. A Viability/Cytotoxicity Assay Kit for Bacteria Cells (NucGreen) was purchased from UElandy (Suzhou, China). A Calcein AM/PI Double Staining Kit was purchased from Elabscience (Wuhan, China). The GSH content assay kit was provided by Solarbio, Beijing, China. Cell lysis buffer and a bicinchoninic acid (BCA) assay kit were obtained from Beyotime, China. A protease inhibitor cocktail was purchased from MedChemExpress, and a phosphatase inhibitor cocktail was obtained from Yeasen, China. The zeta potential of the samples was determined using a dynamic light scattering analyzer (Zetasizer Nano ZS). Thermal behavior was analyzed using a differential scanning calorimeter (DSC, TA Instruments). Tensile, compression, and lap shear, peel tests of the hydrogels were measured using a universal testing machine (CMT6103). Fluorescence spectra were obtained using a Horiba Duetta spectrofluorometer with a 10 mm quartz cuvette. Ultraviolet–visible (UV‒Vis) absorption spectra were recorded using a Hitachi PharmaSpec UV-1900 UV‒Visible spectrophotometer. SpectraMax i3x Multi-Mode Microplate Detection System (Molecular Devices, CA, USA) was used for fluorescence detection. GLORIA-X500A from Zolix with a parallel light spot diameter of 4.6 cm was used to simulate sunlight. Scanning electron microscopy (SEM) images were collected using a Zeiss Sigma 300. FTIR was performed using a PerkinElmer Spectrum 100. Hydrogel samples used for SEM and FTIR characterization were prepared by freeze-drying. For SEM imaging, the freeze-dried specimens were cut into small pieces and sputter-coated with a thin gold layer before observation. Transmission electron microscope (TEM) images, were collected using HT7800, HITACHI, Japan. Fluorescence images were acquired using confocal laser scanning microscopy (CLSM; Nikon, Eclipse Ti-S, Japan) and analyzed with NIS-Elements AR software. Voltage measurement was performed using a SourceMeter (2635B, KEITHLEY, USA). AntibodyCompanyDescriptionCatDilutioniNOSPTGRabbit polyclonal antibody18985-1-AP1:500MMRServicebioRabbit polyclonal antibodyGB1134971:500Secondary antibody for IFJackonCY3-conjugated goat anti-rabbit IgG111-165-0031:500Secondary antibody for IFJackonAlexa Fluor® 488-conjugated goat anti-rabbit IgG111-545-0031:200 Preparation of intelligent LIG dressing PI film with a thickness of 120 μm (Zeman Tape Material Technology, China) was directly irradiated by a 10.6 μm CO2 laser marking machine (Minsheng Laser #MSDB-FM60 CO2 Laser Marker, 60W) to obtain LIG. The laser was operated in vector mode under ambient air atmosphere, and the laser power, speed, frequency, line spacing, and pulses were set as 1.8 W, 1000 mm/s, 10 kHz, 0.03 mm, and 5, respectively. To introduce positive charges onto the LIG surface, LIG films were used as substrates. A solution of 0.6368 g 4-aminopyridine dissolved in 10 mL of dimethyl sulfoxide was prepared and sonicated until fully transparent, after which 1 mL of isopentyl nitrite was added. The LIG films were placed on a hot plate preheated to 70°C, and approximately 200 μL cm−2 of the reaction mixture was added dropwise to the surface. The films were maintained at 70°C for 1 h to allow anchoring of pyridine groups, then rinsed several times with dimethylformamide (DMF) and dried at 60°C. For quaternization, a mixture of 3 mL 2,6-lutidine, 3 mL iodomethane, and 3.6 mL DMF was prepared. 800 μL of this solution was carefully dropped onto the LIG surface at 60°C, ensuring uniform coverage and controlled addition speed. After reaction, the films were thoroughly washed with DMF and ethanol and dried at 60°C to yield positively charged LIG (LIG+). To prepare the eutectic carrier for ITZ loading, 2 g of lauric acid (LA) and 0.5 g of stearic acid (SA) were heated together at 70°C with stirring for 1 h until fully melted, followed by cooling to room temperature to obtain a solid eutectic. Subsequently, 0.4 g of this eutectic mixture and 20 mg of ITZ were dissolved in 2 mL dichloromethane (DCM). Separately, 0.8 g dopamine (DA) was dissolved in 40 mL Tris-HCl buffer (pH 8.5), and 0.6 g sodium dodecyl sulfate (SDS) was added as a stabilizer. A portion (1.6 mL) of the eutectic–ITZ solution in DCM was then added to the DA/SDS aqueous solution by shaking at 100 Hz for 30 min. LIG+ films were immersed in the resulting solution for 24 h, with gentle shaking every 6 h to ensure uniform exposure. The samples were then rinsed with deionized water to remove free components and dried at 60°C, yielding LIG+ films loaded with ITZ. Polyacrylamide/chitosan (PAAm/CS) hydrogel was synthesized by UV-initiated free radical polymerization. A precursor solution was prepared by mixing 1.76 g acrylamide, 8.8 mg PEGDA crosslinker, and 17.6 mg Irgacure 2959 photoinitiator into 10 mL of 1 wt% chitosan in 0.2 M acetic acid, followed by sonication in an ice bath for 30 min until homogeneous. The precursor solution was then cast directly onto the surface of LIG+ITZ on PI substrates placed at the bottom of a glass mold, with thickness adjusted by varying the solution volume. The assembly was exposed to 365 nm UV light for 30 min to achieve gelation. After curing, the hydrogel–LIG+ITZ–PI composite was demolded and placed at −18°C for 3 h. The PI substrate was then carefully peeled away, leaving the LIG+ITZ layer adhered to the surface of the PAAm/CS hydrogel. The resulting LIG+ITZ@PCS hydrogel was rinsed with PBS or deionized water and dried at room temperature. The LIG+ITZ@PCS hydrogel recommended storage condition is at 4°C in a controlled environment with approximately 52% relative humidity. Cells and fungus strains and growth conditions T. rubrum microconidia were grown in PDB culture medium at 28°C for at least 10 days. Subsequently, a sterile cotton tip applicator was used to transfer the microconidia from the surface of the hyphal colonies into sterile PBS. The microconidia were separated by filtration of the suspension through sterile cotton gauze and diluted to a density of 1 × 108 conidia mL−1 in PBS with a haemocytometer. For biofilm culturing, the T. rubrum was grown on PDB and incubated at 28°C for seven days or until sporulation. The inoculum was prepared by covering the cultures with 5 ml of PBS, and adjusting to a final concentration of 1 × 108 conidia mL−1. Then, 1000 μL of inoculum was added to 24-well plates containing previously sterilized coverslips. The plates were then incubated without agitation at 37°C for 3 h for biofilm pre-adhesion. After this time, the supernatant was gently removed from the wells, the cells were washed three times with PBS for removal of non-adherent cells, 1000 μL of RPMI 1640 medium was added and the plates were incubated at 37°C for 72 h. Human embryonic lung fibroblasts (MRC-5 cells) were obtained from the China Center for Type Culture Collection and cultured in MEM supplemented with 10% heat-inactivated FBS and 1% antibiotic-antimycotic solution (penicillin and streptomycin) in a 5% CO2 humidified incubator at 37°C. Adhesive performance tests To study the adhesion ability of hydrogel and LIG+ITZ@PCS hydrogel, a series of external stresses was introduced, including stretching, distorting, bending, washing and turning. Then, adhesive ability of the hydrogel and LIG+ITZ@PCS hydrogel on fresh porcine skin (bonding area, 10 × 40 mm) was evaluated. Swelling ratio test In the swelling rate experiment, lyophilized hydrogel, LIG@PCS hydrogel and LIG+ITZ@PCS hydrogel specimens were used for the test, the original weight was marked as W0. Hydrogel, LIG@PCS hydrogel and LIG+ITZ@PCS hydrogel were immersed in PBS solution and then taken out to weight (W1) at scheduled time. Degradation ratio test Hydrogel and LIG+ITZ@PCS hydrogel specimens were used for the test, the original weight was marked as W0. Hydrogel, LIG@PCS hydrogel and LIG+ITZ@PCS hydrogel were immersed in PBS adjusted to pH 5.5 and then taken out to weight (W1) at scheduled time. T. rubrum capture ability Briefly, 1.0 mL of T. rubrum at working concentration (OD600 = 2.0) was resuspended in either PBS (pH 7.4) or PBS adjusted to pH 5.5. The fungal suspension was then co-cultured with different hydrogels (hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, or LIG+ITZ@PCS hydrogel) for 1 h under static conditions. Subsequently, the OD600 of the mixture supernatant was measured every 30 min. To observe the quantity of fungi captured by the different groups of hydrogels, the samples (hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel and LIG+ITZ@PCS hydrogel) were freeze-dried in a lyophilizer (CREATRUST, China) for 24 h and then characterized using a SEM (Zeiss Sigma 300). Photothermal effect measurements LIG+ITZ@PCS hydrogel was irradiated with sunlight (1.0 kW m−2), the heat distribution and temperature increase at 5, 10, 15, 20, 25 and 30 min were determined by an infrared thermal imager. In vitro release of ITZ from LIG Accurately weighed 4.0 mg of ITZ was dissolved in 2 mL of DMSO to make a 2000 μg mL−1 stock solution. Aliquots of the stock solution were diluted with DMSO to make 0.05, 0.1, 0.2, 0.5, 1.0, and 2.0 μg mL−1 ITZ solutions. The percentage of drug released at 5, 10, 15, 20, 25, and 30 min was determined using UV detection at 254 nm with a UV-Vis spectrophotometer (UV2600i, Japan) for the LIG+ITZ@PCS hydrogel at 25°C, 37°C, or 50°C under sunlight irradiation. The mean of triplicate samples at each time point is reported. Anti-T. rubrum activity and mechanism Fluorescence imaging: After treatment with different groups, T. rubrum was washed with PBS three times. Then stained with a Viability/Cytotoxicity Assay Kit and imaged using a confocal laser scanning microscope (Nikon, Eclipse Ti-S, Japan) with a 488 nm laser and 515-550 nm emission filters for the NucGreen and a 561 nm laser and 570-620 nm emission filters for EthD-III. Plate count method: The hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel and LIG+ITZ@PCS hydrogel were cut into small square pieces with an area of 1 cm2. Each group had at least three hydrogels, and they were placed in a 24-well plate. To each well was added 1 mL of T. rubrum microconidia suspension dropwise to completely immerse the hydrogels. Then, the samples (hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ) were exposed to with or without sunlight irradiation for 30 min (the sunlight intensity was 1.0 kW m−2 unless otherwise stated.). Subsequently, 100 μL of T. rubrum suspension appropriately diluted with PBS was plated on PDB agar, incubated at 28°C overnight and subjected to the plate count method to evaluate T. rubrum viability. The plates were photographed with a Bio-Rad Universal Hood II-GelDoc System and the colonies were counted. SEM: After treatment with different groups, T. rubrum were fixed with 2.5% glutaraldehyde overnight at 4°C. After fixation, the bacteria were washed three times with PBS, dehydrated sequentially in different concentrations of ethanol (30%, 50%, 75%, 90%, 95% and 100%) and dried sequentially in the presence of tert-butanol (30%, 50%, 70%, 90% and 100%). Finally, the samples were sprayed with metal for SEM analysis with a Zeiss Sigma 300 scanning electron microscope. TEM: TEM was employed to study the internal mitochondrial structural changes of T. rubrum. Treated cells were fixed with glutaraldehyde (2.5%, v/v) at 4°C for 12 h and osmic acid (1%, v/v) for 2 h. After washing with PBS three times, the cells were dehydrated with different concentrations of ethanol (30%, 50%, 70%, 90%, and 100%) for 15 min each, treated with pure acetone for 15 min twice, suspended in a graded Spurr812 epoxide resin (30%, 50%, 70%, 100%) for 12 h each, embedded, and left to polymerize for 48 h at 70°C in an oven. Each sample was cut into thin sections, ≈50-70 nm, using an ultramicrotome and double stained with 2% uranyl acetate and lead citrate. The mitochondrial morphology of T. rubrum was visualized by a TEM at 100 kV. Membrane Potential of T. rubrum: Fluorescent carbocyanine dye DiOC2(3) (Macklin, 905-96-4) was used to assess the membrane potential of bacteria, in which the bacteria with intact cell membrane potential emit red fluorescence, whereas the loss of membrane potential leads to the emission of green fluorescence. The treated T. rubrum was harvested by centrifugation (4000 rpm, 3 min) and stained with 30 μM of DiOC2(3) for 30 min in the dark. Thereafter, the stained bacteria were observed by a CLSM with a 488 nm laser and 515-550 nm emission filters and a 561 nm laser and 570-620 nm emission filters for DiOC2(3). JC-1 staining: For JC-1 staining, 0.5 mL of freshly prepared JC-1 working solution (Beyotime, C2006) was added to each sample and shaken for several times. The samples were incubated for 20 min at 37°C, and washed with washing buffer for three times. The final samples were examined under a SpectraMax i3x Multi-Mode Microplate Detection System (Molecular Devices, CA, USA). Set the Ex/Em = 490/530 nm to observe JC-1 monomers and Ex/Em = 525/590 nm to observe JC-1 aggregates. ATP level test: ATP level in T. rubrum was measured using the ATP assay kit (Beyotime, S0026). Treated T. rubrum was collected by centrifugation, and subsequently treated with the FastPrep−24 5G (MP Biomedicals) to completely lyse, then centrifuged at 8000 rpm for 5 min. Finally, T. rubrum supernatant (25 μL) was added into 100 μL ATP working solution, ATP chemiluminescence was detected using SpectraMax i3x Multi-Mode Microplate Detection System (Molecular Devices, CA, USA). Measurement of the GSH content in T. rubrum: T. rubrum was collected by centrifugation, and subsequently treated with the FastPrep−24 5G (MP Biomedicals) to completely lyse bacteria, then centrifuged at 8000 rpm for 5 min. The collected supernatant was used to estimate the GSH content in the biofilms (Njjcbio, A061-1-2). The absorbance of the sample at 405 nm was measured with SpectraMax i3x Multi-Mode Microplate Detection System (Molecular Devices, CA, USA). Iron Staining: After treatment with different groups, T. rubrum was washed three times with PBS. Subsequently, the T. rubrum was stained using a Cell Ferrous Iron (Fe2+) Fluorometric Assay Kit (Meilunbio, MA0647), which was incubated in 1 μM Fe2+ working solution for 30 min at 37°C. Finally, the stained T. rubrum was using CLSM with a 561 nm laser and 570-620 nm emission filters for Fe2+. RNA isolation and quantitative real-time PCR To further investigate the effects of hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ with or without sunlight irradiation on T. rubrum, the total RNA of T. rubrum from different groups was immediately pretreated with FastPrep−24 5G (MP Biomedicals) and subsequently extracted with TRIzol reagent (15596-026, Life Technologies). RNA was reverse transcribed using a Hifair II 1st Strand cDNA Synthesis Kit (11119ES60, Yeasen). First, 1 μg of RNA, 1 μL of Oligo (dT)18, and 13 μL of H2O were denatured at 65°C for 5 min. After cooling immediately on ice, the RNA was reverse transcribed using a reaction mixture composed of 4 μL of 5×reaction buffer and 2 μL of Hifair Enzyme Mix. Following the manufacturer's instructions, amplification was performed for 5 min at 25°C, followed by treatment at 42°C for 30 min, and deactivation at 85°C for 5 min. Each 20 μL of qRT‒PCR mixture contained 10 μL of Taq Pro Universal SYBR qPCR Master Mix (Q712-02, Vazyme), 5 μL of cDNA, 0.5 μL of each primer (25 μM), and 4 μL of RNase-free water. The amplification reaction was performed according to the manufacturer's instructions as follows: 3 min of activation at 95°C; 40 cycles of 95°C for 5 s and a final extension at 60°C for 30 s. A CFX96TM Real-Time PCR System (Bio-Rad, USA) was used for qRT‒PCR according to the manufacturer's protocol. The 2−ΔΔCt method was used to determine the relative mRNA expression levels of target genes from three independent replicates of each sample performed in triplicate. The gene-specific primer sequences are shown in the following table. qRT-PCR primersFp (5′to 3′)Rp (5′to 3′)NoxTGGCTGTGACTTTGACGAGACCGACTAACACCGCTACTTCβ-tubulinCCGCTCTTTGCTCTATTCCTCCATCTCGTCCATACCCTCA Ferroptosis inhibition assay in T. rubrum For the ferroptosis inhibition assay, T. rubrum conidia were pre-treated with 10 μM ferrostatin-1 (SH2738, Beyotime) for 1 h, followed by incubation with hydrogels (LIG+ITZ@PCS, LIGITZ@PCS, LIG+@PCS, LIG@PCS, ITZ) under sunlight irradiation or in the dark for 30 min. After treatment, the cells were stained using a Viability/Cytotoxicity Assay Kit and imaged with a confocal laser scanning microscope (Nikon Eclipse Ti-S, Japan). NucGreen fluorescence was excited at 488 nm and collected through a 515–550 nm emission filter, while EthD-III fluorescence was excited at 561 nm and collected through a 570–620 nm emission filter. Inhibition of T. rubrum biofilm formation T. rubrum was adjusted to a final concentration of 1 × 106 CFU mL−1. Next, hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ were added to a 96-well microtiter plate and 40 mm dish, and exposed to with or without sunlight irradiation for 30 min. The plates were then incubated without agitation at 37°C for 3 h for biofilm pre-adhesion. After this time, 1000 μL of RPMI 1640 medium was added and the plates were incubated at 37°C for 72 h. Digital photographs of the biofilms in the dishes were then taken. The biofilms in the microtiter plate were fixed with methanol for 15 min and stained with 0.1% crystal violet (CV, 71012314, Sinopharm) for 5 min. The excess dye was removed with PBS, the samples were dried, and the biofilms were decolored with 30% acetic acid for 15 min at 37°C to ensure even dissolution. The absorbance was measured by the Molecular Devices SpectraMax i3x Multi-Mode Microplate Detection System. LPCB stain On a clean glass slide, place 1-2 drops of LPCB staining solution. Using a dissecting needle, carefully pick a small amount of sporulating hyphae from the biofilm of T. rubrum and immerse them in the staining solution, gently teasing the hyphae apart. Then, carefully cover with a coverslip. Observe under a microscope. T. rubrum biofilm formation eradication A Viability/Cytotoxicity Assay Kit for Bacteria Cells and SEM imaging were used to study the anti-T. rubrum effect and penetration efficiency of the LIG + ITZ@PCS hydrogel under sunlight irradiation for T. rubrum biofilm eradication. Briefly, T. rubrum biofilms were then incubated with hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ and then irradiated with or without sunlight for 30 min. After washing with PBS three times, each biofilm was treated with a Viability/Cytotoxicity Assay Kit for Bacteria Cells according to the standard protocol. The biofilm was then imaged by CLSM (Eclipse Ti-S, Nikon) or prepared for SEM imaging (Zeiss Sigma 300). A 488 nm laser and 515-550 nm emission filters were used for the NucGreen, and a 561 nm laser and 570-620 nm emission filters were used for EthD-III.By analyzing the fluorescence signals from Viability/Cytotoxicity Assay Kit with Comstat2, biofilm biomass and biofilm average thickness were evaluated. Intracellular ROS level ROS level in T. rubrum biofilms was measured using the ROS probe (DCFH-DA). T. rubrum biofilms were then incubated with hydrogel, LIG@PCS hydrogel, LIG+@PCS hydrogel, LIGITZ@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ and then irradiated with or without sunlight for 30 min. After that, treated T. rubrum biofilms incubated with serum-free medium containing DCFH-DA (Beyotime, S0033S) for 20 min. The final samples were examined under a SpectraMax i3x Multi-Mode Microplate Detection System (Molecular Devices, CA, USA). Voltage changes of LIG + ITZ@PCS hydrogel at different ODs The obtained LIG+ITZ@PCS hydrogel were immersed in T. rubrum suspension with a different CFU/mL for 1 min. Then use the SourceMeter (Keithley, Model 2635B) to monitor the voltage changes of LIG+ITZ@PCS hydrogel at different optical CFU/mL values. Construction of the mouse tinea pedis model and treatment All animal procedures were carried out under the guidelines set by the Institutional Animal Care and Use Committee of Hubei Province, and the overall project protocols were approved by the Animal Ethics Committee of Wuhan University (NO. WP20220020). 12-week-old male C57BL/6 mice were used for mouse models of tinea pedis. T. rubrum inoculation was performed on the hind feet of the mouse. Inject 20 μL of the conidial suspension (approximately 1.0 × 108 CFU mL−1) into the hind foot of the mouse according to the previous method. Moisten a portion of gauze with 500 μL of the conidial suspension and fix it on the mouse's hind foot with adhesive tape to infect the mouse. Seven days post-infection, remove the adhesive tape, cease the injection of T. rubrum suspension, and commence different treatment. The mice with tinea pedis were randomly divided into four groups (n = 8): 1) no T. rubrum infection or treatment (Control); 2) no treatment after successful modeling (Without Treatment); 3) affix a 5 mm × 8 mm piece of LIG+ITZ@PCS hydrogel to the sole of the mouse's foot and subject it to sunlight exposure three times a week for 30 min each session. (With Treatment); 4) apply ITZ ointment to the soles of the mice's feet three times a week (ITZ). Evaluation of therapeutic effects in mice with tinea pedis To investigate the morphological changes in tinea pedis model mice before and after treatment across different groups, photographs of the soles and toenails of the mice were taken using digital devices and a microscope on days 0, 7, 14, 21, and 28. Concurrently, on days 0, 14, and 28, the voltage of the LIG+ITZ@PCS hydrogel on the feet of the tinea pedis model mice was monitored using a Source Meter and a mobile multimeter to reflect changes in the amount of T. rubrum. For real-time monitoring on the murine tinea pedis model, the LIG+ITZ@PCS hydrogel patch was gently applied to the infected foot. Two strips of conductive aluminum tape were attached to the opposite long edges of the patch, ensuring direct contact with the exposed LIG electrodes. Wires were clipped onto the extended ends of the aluminum tape, completing the electrical interface. These wires were then connected to a digital source meter (or a Wi-Fi-enabled multimeter) for signal acquisition. In vivo anti-T. rubrum immunity The different group of mice were euthanized on day 28 and the single cell suspensions of spleen was obtained according to the standard protocol. Following, cell counting was carried out. Then, cells were stained with Violet 450 anti-mouse CD3 (Elabscience, E-AB-F1013Q), PE anti-mouse CD4 (Elabscience, E-AB-F1353D), and APC anti-mouse CD8a (Elabscience, E-AB-F1104E) to characterize T lymphocytes. At the same time, cells were stained with PE anti-mouse CD80 (Elabscience, E-AB-F0992D), APC anti-mouse CD86 (Elabscience, E-AB-F0994E), and FITC anti-mouse CD11c (Elabscience, E-AB-F0991C) to characterize dendritic cells. Cells were stained with FITC anti-mouse CD11b (Elabscience, E-AB-F1081C), PerCP-Cy5.5 anti-mouse CD32 (BD Pharmingen, Cat.56054), and PE-Cyanine7 anti-mouse CD206 (eBioscience, 25-2061-82) to characterize macrophages. The obtained cells and antibodies solution was stored at 4°C in the dark, followed by flow cytometry. Histological analysis Mice were sacrificed after 28 days of treatment, and their hind feet were collected and fixed in 4% formaldehyde solution overnight at 4°C. For hematoxylin–eosin (H&E), Masson staining and Grocott-Gomori methenamine silver (GMS) staining, the wound tissues were embedded in paraffin, sectioned, and stained the reagents of with an H&E staining kit (S191003, Pinuofei), masson staining kit (S191006, Pinuofei) and a GMS staining kit (S-1012, Pinuofei), respectively, following the instructions. The sections were then observed under a microscope (E100, Nikon). Immunofluorescence staining At the end of the sixth day, the mice were euthanized and dissected to obtain the eyeballs, and histological analysis of the eyeballs from each group was carried out. The eyeballs were collected and fixed in eyeball fixative overnight at 4°C, dehydrated in graded ethanol solutions (80%, 90%, 95%, and 100%), embedded in paraffin and cut into 4-μm thick tissue sections. Subsequently, the sections were permeabilized with 0.3% Triton X-100 (Sigma‒Aldrich) in PBS for 15 min and then blocked with 5% sheep serum (Sigma‒Aldrich) for 1 h at room temperature. Subsequently, the sections were incubated with primary antibodies against iNOS and MMR overnight at 4°C. The sections were then incubated with Alexa Fluor-conjugated secondary antibodies (diluted 1:400) at room temperature for 1 h. Moreover, the cell nuclei were counterstained with DAPI (C0060, Solarbio, 1:500). The stained sections were imaged with a fluorescence microscope, and ImageJ was used to analyze the fluorescence intensity of iNOS and MMR. Behavioral testing in tinea pedis animals One day before the behavioral tests were performed, the mice were kept in a holding cabinet and habituated to the testing room. The behaviors of the mice were recorded with a video tracking system. To minimize the anxiety of the animals, the testing room was kept dark. The experiments were blinded to group identity during the experiment and quantitative analyses. Different behavioral tests in the same mouse cohort were separated by at least one day of break. Tail suspension test: During a 10 s tail suspension period hind limb clasping severity (scores 0–1- no hind limb clasping to 3- most severe phenotype) was assessed by the experimenter. The test was repeated three times per animal and the average score was calculated, scores between 0 and 1 are not considered as hind limb clasping. Open field test (OFT): To evaluate depressive-like behavior due to the feet malaise, mice were placed in one corner of OFT arena that consisted of a central area (20 × 20 cm2) and a marginal area (40 × 40 cm2). The mice were allowed to freely explore their surroundings. A video camera placed above the OFT arena was used to record the entire OFT trial. Individual mice were transferred to the OFT arena and placed at the estimated central point. After an acclimation period (2 min), behavior was recorded for 5 min. After each test, the apparatus was cleaned with 75% ethanol to remove olfactory cues. Four behavioral traits were measured (distance moved, velocity, mobility state and distance moved in center). The recorded videos were stored on a computer, and behavior was analyzed using EthoVision XT software (Noldus Information Technology, the Netherlands). Gait analysis: Gait properties were assessed by footprint analysis as described previously. Briefly, fore- and hind paws were colored with non-toxic dye and the animals allowed crossing a white sheet of paper, 70 cm in length, in a straight line. Stride, sway, and stance length, as well as paw distance. Toenail clearance test of LIG + ITZ@PCS hydrogel The toenail and foot dander samples in experiments were approved by the Ethics Committee of Maternal and Child Health Hospital of Hubei Province (No. 2022IEC025). Every group was treated with LIG+ITZ@PCS hydrogel and ITZ, and storage in dark or irradiation with sunlight and photographed at 0 min, 10 min, 20 min and 30 min with digital devices. Toenail color changes were quantified, and in addition, toenail samples were subjected to plate culture and SEM experiments. Fluorescence staining to determine cytotoxicity For the Calcein AM/PI staining assay, cells were cocultured with LIG@PCS hydrogel, LIG+@PCS hydrogel and LIG+ITZ@PCS hydrogel. Then irradiated with sunlight or incubated in the dark for 30 min. After rinsing with PBS, the cells were incubated with Calcein AM/PI according to the protocol of Calcein AM/PI Double Staining Kit and imaged by CLSM (Nikon, Eclipse Ti-S, Japan). A 488 nm laser and 500-550 nm emission filter were used for Calcein AM, while a 561 nm laser and 570-620 nm emission filter were used for PI. CCK-8 assay Cytotoxicity was determined by the standard WST-8 (2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium, monosodium salt) (CCK-8) assay. MRC-5 cells were seeded in 96-well black microplates at 100 μL per well and incubated overnight at 37°C to achieve a cell density of 70–80%. Then, cells were cocultured with LIG@PCS hydrogel, LIG+@PCS hydrogel and LIG+ITZ@PCS hydrogel; DMEM was used as a blank control. Then, the cells were illuminated with sunlight or kept in the dark for 30 min. After 24 h of incubation, 100 μL of fresh medium containing 10 μL of CCK-8 solution was added to each well for incubation at 37°C for 2 h. The absorbance was then measured at 450 nm using a SpectraMax M2 microplate reader (Molecular Devices). Cell viability (%) was calculated as follows (A = OD450 absorbance). Hemolysis test Fresh mouse blood was collected and treated with heparin sodium to prevent coagulation. The red blood cells were collected by centrifugation at 5000 rpm for 10 min and then resuspended in PBS (20%, v/v). 50 μL red blood cell suspension was mixed with LIG@PCS hydrogel, LIG+@PCS hydrogel, LIG+ITZ@PCS hydrogel and ITZ. Each mixture was incubated at 37°C for 2 h. After centrifugation at 2000 rpm for 10 min, the OD540 of the supernatant was measured with a microplate reader. An untreated red blood cell suspension was used as a negative control, sterile water was used as a positive control, and PBS was used as a solvent control. The hemolysis ratio (%) was calculated as follows. Long-term toxicity study Soles from male C57BL/6 mice (12 weeks, n = 8) were treated with LIG+@PCS hydrogel or PBS. Euthanasia was performed after 30 days. Blood samples were collected for hematological and clinical biochemical analyses. Moreover, the soles were removed from each group. Paraffin sections of these organs were prepared and subjected to H&E staining for histological examination. Statistical methods All the experiments in this study were performed with at least three replicates. All the data were statistically analyzed using GraphPad Prism 9.5 statistical software. The 2D images and fluorescence intensities were processed or analyzed by ImageJ. The 3D images were processed using NIS-Elements AR software (Nikon) and COMSTAT 2.0. All the data are presented as the means±standard deviations (SDs), except where indicated otherwise. The statistical significance of differences was determined by an unpaired t-test or analysis of variance (ANOVA) using GraphPad Prism 9.5 software and indicated as follows: p < 0.05 (*), p < 0.01 (**), p < 0.001 (***), p < 0.0001 (****) and n.s. = not significant. CRediT authorship contribution statement Luojia Chen: Data curation, Investigation, Writing – original draft. Zihao Li: Investigation, Writing – original draft. Chao Shen: Investigation. Si-Ling Chen: Investigation. Le Cheng: Investigation. Weiran Niu: Investigation. Yuncong Yuan: Investigation. Yidan Zhou: Investigation. Jie Li: Investigation. Jiansheng Su: Investigation. Nan Lin: Investigation. Shi Chen: Resources, Supervision. ZhongMeng Lai: Investigation, Supervision. Ruquan Ye: Supervision, Writing – review & editing. Meijia Gu: Project administration, Resources, Supervision, Visualization, Writing – review & editing. Ethics approval and consent to participate All animal procedures were approved by the Animal Ethics Committee of Wuhan University (No. WP20220020). The toenail and foot dander samples in experiments were approved by the Ethics Committee of Maternal and Child Health Hospital of Hubei Province (No. 2022IEC025). Declaration of competing interest The authors have filed a patent application based on this study.