Electrostatic and Structural Engineering in Preintercalated V2O5: A Design Framework for Multivalent Ion Storage Authors: Anagha P Vincent, P Vipin Kumar, S B Gudennavar, B S Nishchith, S G Bubbly, Maria Helena Braga Published: 2026 ABSTRACT AbstractPreintercalation has emerged as a powerful strategy to modulate the electrochemical performance of layered vanadium oxides, yet a unified mechanistic understanding linking structural and electrostatic effects remains lacking. Here, we establish a unified framework describing how preintercalated species govern ion transport, structural stability, and electrochemical behavior in V2O5‐based cathodes. We show that preintercalation operates through a coupled structural–electrostatic mechanism governed by interlayer spacing, charge screening, and solvation effects, where guest species act as interlayer pillars that stabilize the lattice while simultaneously tuning the local electrostatic potential landscape and charge screening environment. The interplay between ionic size, charge density, hydration state, and electronic structure defines Zn2+ diffusion barriers, redox kinetics, and electrochemical reversibility. By systematically analyzing monovalent, divalent, and trivalent preintercalated metal ions, we identify key design principles that dictate optimal interlayer spacing, electronic conductivity, and ion mobility. Importantly, the role of structural water is redefined as an active electrostatic mediator reducing effective ion charge and lowering migration barriers. This work transcends conventional material‐specific discussions and provides a generalizable design framework for preintercalation engineering in layered oxides, with implications extending beyond zinc‐ion systems to multivalent and hybrid energy storage technologies.Keywords: interlayer spacing, metal‐ion intercalation, vanadium pentoxide (V2O5), zinc‐ion battery Introduction Zinc‐ion batteries (ZIBs) are being developed as safer, low‐cost, and environmentally friendly alternatives to lithium‐ion batteries. They offer a high theoretical capacity of 820 mAh g−1, along with several key advantages, including the use of nonflammable aqueous electrolytes, abundant, inexpensive, nontoxic, and recyclable zinc [1, 2, 3, 4, 5, 6, 7]. A typical ZIBs consists of a zinc metal anode, a zinc‐ion hosting cathode, and a zinc‐containing electrolyte. While discharging, the ions migrate through the electrolyte to the cathode, where they are intercalated [8, 9]. This process is reversed during charging. ZIBs typically operate within a voltage range of 1.0–1.8 V, have an energy density of 100–200 Wh kg−1, a cycle life of 500–3000 cycles, and a Coulombic efficiency of ∼95% [10], but remain limited by sluggish multivalent ion diffusion and interfacial instability. Zinc shows good stability in aqueous electrolytes like ZnSO4 and Zn(CF3SO3)2. However, Zn‐ion batteries face challenges, including dendrite formation caused by Zn plating during cycling, which can cause short circuits, cathode degradation resulting from repeated Zn2+ insertion, and hydrogen evolution due to water decomposition at low potentials, which limits their voltage window and energy density compared to Li‐ion batteries [3, 11, 12]. Over the years, various cathode materials have been explored to address the sluggish Zn2+ insertion/extraction kinetics observed in traditional cathodes. These include metal oxides, polyanionic frameworks, Prussian blue analogs, layered sulfides, organic cathode hosts, conductive polymers, and MXene‐based materials among others [13]. ZIBs generally operate in aqueous electrolytes, hence chemical stability and redox compatibility are of prime importance. In this context, metal oxides have emerged as a suitable and extensively explored class of cathode materials [14]. Many conventional cathode materials, such as layered sulfides and organic frameworks, undergo rapid structural degradation or dissolution in aqueous zinc electrolytes due to strong electrostatic interactions and structural instability under hydrated Zn2+ insertion. Metal oxides possess strong metal—oxygen bonds, which contribute to enhanced chemical and structural stability, as well as to reversible Zn2+ redox reactions. Furthermore, metal oxides can be tuned to layered, tunneled, and open‐framework architectures that accommodate even relatively large, hydrated Zn2+ ions with negligible volume change during cycling. Some of the prominent metal oxide cathodes are MnO2, V2O5, VO2, V6O13, V2O5⋅nH2O, MoO3, TiO2, etc. [15, 16, 17, 18, 19, 20, 21]. Manganese oxides and Prussian blue analogs are also extensively explored, but these materials often suffer from limited specific capacity and/or poor cycling stability [9, 22, 23]. In contrast, vanadium‐based metal oxides gain attention among the metal oxides, as they have very high capacity, structural diversity, and natural abundance [24]. However, the fundamental design rules governing their stability and ion transport remain unclear. Vanadium‐based metal oxides also have multiple oxidation states, such as V5+, V4+, and V3+, forming layered or open structures where Zn2+ intercalation can occur. Among them, vanadium pentoxide (V2O5) stands out as the most widely used cathode in ZIBs, owing to its high theoretical capacity of 589 mAh g−1, stable layered structure, long cycle life, low cost, wide availability and high reversibility in Zn2+ intercalation/deintercalation [25, 26]. Due to its intrinsic properties, one can modify and optimize metal‐ion intercalation and structural engineering of V2O5 more easily than other compounds of vanadium [27, 28, 29] (Figure 1). Though V2O5 has a significant advantage over other metal oxides, the structural degradation caused by the collapse of the interlayer spacing over repeated cycles is a major challenge to be addressed [30]. Schematics highlighting the options to regulate the electrochemical properties of V2O5. Original to this study. Electrochemical performance of V2O5 depends heavily on its lattice/layer structure, surface states, and redox behavior. Repeated Zn2+ insertion/extraction can distort the VO5 pyramids in V2O5 and cause structural degradation, often becoming a key factor limiting battery lifespan and performance [31, 32]. Several strategies have been explored to improve the structural stability and optimize the local electron/charge distribution and electrochemical redox performance [33, 34]. Strategies like defect engineering, preintercalation, structural engineering, nanostructuring, carbon‐based composites, polymer or organic treatments, surface modifications, etc. are being explored [16, 35, 36]. Preintercalation stabilizes V2O5 through interlayer pillaring and electrostatic screening, mitigating lattice collapse during Zn2+ insertion [37]. A wide range of monovalent, divalent, and trivalent metal ions have been explored as intercalants within the V2O5 framework to enhance electrochemical properties [38] (Figure 2). Such preintercalated metal ions enhance structural stability through strong host–guest interactions, intrinsic conductivity due to excess electrons, and reduces vanadium dissolution while acting as a strong pillar for Zn2+ ions to intercalate. This also enables faster Zn2+ diffusion and greater stability in ZIBs. Optimal intercalants balance ionic size, charge density, and chemical stability to maximize interlayer spacing while preserving Zn2+ mobility (Figure 2). Optimal intercalants exhibit a balance of ionic size, charge density, and chemical stability in aqueous electrolytes. Crystal structures highlighting: (a) V2O5 orthorhombic (s.g.: Pmmn). (b) Examples of possible V2O5 intercalated species Zn2+, H2O, and H3O+ onto the layers of V2O5 framework. Original to this study. This review highlights monovalent, divalent, and trivalent metal‐ion intercalation strategies within the V2O5 framework. In hydrated V2O5, the structural water affects the interlayer spacing (Figure 2b), thereby influencing ion diffusion and intercalation. Role of Structural Water in Bilayer V2O5 Bilayer‐structured V2O5⋅nH2O (VOH) is emerging as a promising cathode material for aqueous ZIBs. Structural H2O modulates interlayer electrostatics and solvation dynamics, driving structural changes and tuning the performance of vanadium oxides. Their involvement is normally inescapable during hydrothermal synthesis and when aqueous electrolytes are employed. Structural water between V2O5 sheets increases interlayer spacing and shields charge interactions during Zn2+ intercalation, thus decreasing the binding energy between Zn and V2O5, as supported by density functional theory (DFT) calculations and electrochemical measurements [39] (Figure 2b). Moreover, oxygen atoms in H2O can serve as additional host sites to accept electrons from zinc, leading to an increased open‐circuit voltage. Meanwhile, structural water creates a more uniform electrostatic environment, thereby lowering the diffusion barrier for Zn2+. Yan et al. [19] also suggested that the H2O‐solvated Zn2+ had a largely reduced effective charge and thus weaker electrostatic interactions with the V2O5 framework, thereby promoting its diffusion. A facile in situ approach was developed by Zhao et al. [40] to simultaneously realize multivalence introduction, increased interlayer water content, and expanded interlayer space in hydrated V2O5 (from 11.6 to 14.0 Å); the structural water in V2O5 facilitates ion transport by reducing migration barriers to the diffusion of Zn2+. These results highlight the critical role of controlled dehydration in tuning interlayer structure and electrochemical performance [41]. Electrochemical characterization demonstrated that the as‐prepared samples without heat treatment showed rather poor cycling stability (only 56 mAh g−1 after 600 cycles at 0.5 A g−1). After being heat treated, particularly at 150 °C, the corresponding cell exhibited the best cycling stability (179 mAh g−1 after 600 cycles at 0.5 A g−1). When the heat treatment temperature was below 300 °C, VOH retained its hydrated phase, with the interlayer water content gradually decreasing as the temperature increased. Above 300 °C, VOH begins to depart from the hydrated phase transforming back to the orthorhombic phase (Figure 2), accompanied by a sharp reduction in the interlayer spacing. An optimum water content is a key parameter that enhances the electrochemical performance of VOH, since excess structural water can lead to weak interlayer forces and structural collapse of the active materials, thereby resulting in poor Zn2+ ion storage behavior. The interlayer distance of M x V2O5·nH2O depends on the amount of interlayer water and the type of preinserted metal cation (M). Higher water content, larger hydrated ion radius, and greater electronegativity of M result in an expanded interlayer spacing. M x V2O5·nH2O with optimal structural water content exhibits superior electrochemical performance for aqueous ZIBs [42]. It is the synergistic effect between the intercalated metal‐ion and water molecules that boosts electrical conductivity, accelerates Zn2+ diffusion, and enhances structural stability during cycling [43, 44, 45]. In M x V2O5·nH2O, intercalated metal ions and/or structural water acted as pillars [46, 47, 48, 49, 50]. However, the crystal structure may show different structural evolutions or phase transitions depending upon the type(s) and amounts of intercalated metal ions. Single Metal‐Ion Intercalation Vanadium pentoxide possesses a typical layered structure (Figure 2) that enables metal‐ion storage; however, it suffers from poor structural stability and smaller interlayer or tunnel spacing (∼4.4–4.8 Å). The relatively weak van der Waals forces between the V2O5 layers can be easily broken (Figure 3a), making them more prone to degradation during the intercalation/deintercalation of Zn2+ ions. The introduction of monovalent, divalent, or trivalent metal ions, similar to structural water molecules, acts as interlayer pillars, which provides an effective method to enhance overall structural stability. In general, single metal ion intercalation in VOH modifies the interlayer environment of layered materials by expanding the interlayer spacing, altering the electronic and crystal structures, and, in some cases, serving as dopants. Consequently, single metal‐ion intercalation enhances the electrochemical properties, leading to enhanced capacity, energy and power density, and cycle stability. Crystal structures of V2O5 and VOH highlighting interlayer metal atoms and H2O. (a) Zn x K0.5V2O5 and (b) Zn x Na0.5V2O5·H2O. Original to this study. Monovalent Metal‐Ion Intercalation Monovalent metal ions exhibit weaker electrostatic interactions with the host lattice. Thus, the partial replacement of Zn2+ ions with monovalent guest metal ions could enhance the overall performance of aqueous ZIBs. The K+ intercalated V2O5 nanorods prepared by Islam et al. [51] exhibited significant discharge capacities of 439 mAh g−1 at 0.05 A g−1. Furthermore, it recovered 96% of the capacity after 1500 cycles at 8 A g−1. The K0.5V2O5 electrode prepared by Su et al. [52] achieved high reversible capacities of 241 and 115 mAh g−1 at 1 and 5 A g−1. Intercalation of monovalent metal ions generally has an increased interlayer space compared to VOH. This increase in interlayer spacing enhances the material's conductivity and ion transport by increasing interlayer spacing and reducing ion–lattice interactions, thereby improving its experimental specific capacity. For example, Yang et al. [53] demonstrated that intercalating Li+ ions into VOH increased interlayer spacing and accelerated Zn2+ ion diffusion. Li et al. [54] prepared prepotassiated hydrated V2O5 in which the K+ acted as pillars to stabilize the lamellar structure, and crystal water facilitates ion transport and improves the diffusion efficiency of Zn2+ ions. Using a simple, effective hydrothermal method, Chen et al. [55] developed a bi‐intercalated structure of K+ and H2O in V2O5 with a large interlayer spacing (10.2 Å), facilitating efficient Zn2+ insertion and extraction. As the dosage of hydrogen peroxide increased, the water content also increased significantly, indicating that hydrogen peroxide effectively promoted the transformation of vanadium oxide into its hydrated phase. The modification of V2O5 with K+ not only increased the interlayer spacing but also improved the conductivity of vanadium oxide, which further enhanced the Zn2+ diffusion kinetics [56] (Figure 3b). But in some cases, intercalation of monovalent metal ions results in a decrease in the interlayer spacing compared to VOH, mainly due to the strong interaction between monovalent metal ions and lattice oxygen in interlayers. Jia et al. [57] synthesized Na0.27V2O5⋅0.7H2O by preintercalating Na+ ions (Figure 3), replacing approximately 0.3 interlayer water molecules per V2O5 unit. This substitution reduced the interlayer spacing from 12.0 (in VOH) to 11.0 Å, yet enabled faster Zn2+ diffusion, delivering a high capacity of 420 mAh g−1 at 0.05 A g−1, 88% energy efficiency, and excellent cycling stability (88% retention after 2000 cycles at 4 A g−1) compared to VOH. The enhanced performance of Na0.27V2O5⋅0.7H2O stems from reduced structural water content, increased V4+ concentration, improved electron hopping between V4+ and V5+, and weaker Zn2+–host interactions, allowing smoother and more reversible ion transport. This demonstrates that reduced solvation and optimized electronic structures govern Zn2+ transport. Optimal performance is achieved for intermediate ionic radii (e.g., K+), which balance structural expansion and ion mobility. KV12O30‐y·nH2O, reported by Tian et al. [58], led to a contracted interlayer spacing compared to VOH. Qi et al. [59] developed a Cs+ ion intercalated V2O5 cathode, where the strong Cs–O interaction reduced the interlayer spacing to 10.8 Å, compared to 12.1 Å in VOH, thus stabilizing the layered structure and significantly enhancing cycle life (89% capacity retention over 10,000 cycles at 20 A g−1). This Cs+ intercalated material exhibited superior specific capacities of 404.9 mAh g−1 at 0.1 A g−1 and 189.9 mAh g−1 at 20 A g−1, outperforming the pristine VOH electrode. The interlayer spacing of vanadium oxide can be correlated with the interlayer water content along with the electronegativity, ionic radius, and concentration of the preintercalated metal‐ion. Among the monovalent metal ion intercalated V2O5 cathodes summarized in Table 1, K‐ and Cs‐modified systems demonstrate the most balanced electrochemical characteristics when capacity, rate performance, and long‐term durability are considered collectively. In particular, K0.5V2O5.nH2O exhibits very high reversible capacity together with sustained cycling behavior, indicating efficient Zn2+ storage within a structurally stabilized layered framework [56]. Alkali metals have an outer ns1 configuration, and their ionic radius increases down the group. In layered vanadium oxide cathodes, Li+ is too small and strongly polarizing, which can cause lattice distortion and slow diffusion, while Na+ offers only moderate structural expansion. K+ provides an optimal ionic size that expands the interlayer spacing without destabilizing the framework, thereby facilitating Zn2+ diffusion and improving electronic transport. Larger ions such as Rb+ and Cs+ may hinder ion mobility due to their size, and Fr+ is radioactive, making K+ the most effective monovalent metal ion for enhancing electrochemical performance. In group 1, Rb+ and Fr+ have not been explored for monovalent metal ion intercalation because Fr+ is highly radioactive and unstable, while Rb+ has a large ionic size that can distort the layered structure and slow ion diffusion, in addition to being costly and impractical for battery applications. Apart from alkali metal ions, a few other monovalent‐ions like H+, NH4+, organic monovalent cations, etc., can be intercalated into layered V2O5 systems under specific conditions. H+ cointercalation often occurs together with Zn2+ in ZIBs and can improve kinetics (Figure 2b, left), whereas NH4+ is used as a structure directing or pillaring ion. Organic monovalent cations act as spacers but usually reduce energy density due to their large size. TABLE 1Electrochemical performance and interlayer spacing of monovalent metal‐ion intercalated V2O5 cathode materials. MaterialCapacity, mAh g−1 Capacity retention ElectrolyteInterlayer spacing, Å Voltage window, VSynthesis method Reference, year LVO‐250470.00 at 0.5 A g−1 232 mAh g−1 after 500 cycles at 5.0 A g−1 2 M ZnSO4 13.770.4–1.4Hydrothermal[53], 2018 δ‐Na0.27V2O5 ⋅0.7H2O 420.00 at 0.05 A g−1 88.00% after 2000 cycles at 4 A g−1 3 M Zn(CF3SO3)2 11.000.2–1.6Hydrothermal[57], 2022 KV12O30‐y⋅ nH2O 436.00 at 0.05 A g−1 92.00% after 3000 cycles at 5 A g−1 3 M Zn(CF3SO3)2 9.900.2–1.6Hydrothermal[58], 2020KVO439.00 at 0.05 A g−1 96.00% after 1500 cycles at 8 A g−1 1 M ZnSO4 9.400.4–1.4Hydrothermal[51], 2019K0.52V2O5 ⋅0.29H2O270 at 0.1 A g−1 100.00% after 1500 cycles at 2 A g−1 PVDF‐Zn(ClO4)2based polymer membrane (quasisolid electrolyte)10.40.4–1.4Microwave‐assisted hydrothermal[54], 2022KVOH 415.30 at 0.1 A g−1 95.90% after 800 cycles at 0.1 A g−1 3 M Zn(OTf)2 10.200.2–1.6Hydrothermal[55], 2024K0.5V2O5 486.00 at 0.1 A g−1 251 mAh g−1 after 1000 cycles at 5 A g−1 3 M Zn(CF3SO3)2 9.480.2–1.6Hydrothermal[52], 2021 K0.5V2O5⋅ nH2O 372.70 at 1 A g−1 66.90% after 9000 cycles at 10 A g−1 0.005 M KCl10.600.2–1.6Hydrothermal[56], 2023CsVO 404.90 at 0.1 A g−1 89.00% after 10000 cycles at 20 A g−1 3 M Zn(CF3SO3)2 10.800.2–1.6Hydrothermal[59], 2022 Electrochemical performance and interlayer spacing of monovalent metal‐ion intercalated V2O5 cathode materials. Reference, year δ‐Na0.27V2O5 ⋅0.7H2O KV12O30‐y⋅ nH2O 100.00% after 1500 cycles at 2 A g−1 415.30 at 0.1 A g−1 486.00 at 0.1 A g−1 251 mAh g−1 after 1000 cycles at 5 A g−1 K0.5V2O5⋅ nH2O 372.70 at 1 A g−1 404.90 at 0.1 A g−1 Divalent Metal‐Ion Intercalation Unlike monovalent metal ions, which have lower charge density, divalent metal ions have stronger Coulombic interactions, leading to enhanced structural stabilization but higher diffusion barriers, resulting in a more stable structure for vanadium oxides. Although divalent metal ions exhibit similar functional principles to monovalent metal ions, the large radius of these ions is more beneficial to Zn2+ intercalation. The stable chemical bonding between the Ca and O atoms is larger than that of Zn–O, which helps to attain reversible Zn2+ insertion and fast ion transport in Ca0.25V2O5·nH2O by Xia et al. [60] and Ca0.04V2O5⋅1.74H2O by Du et al [43]. In hydrated vanadium oxides with preintercalated Mn2+ ions, Mn2+ and H2O together act as pillars that support the basic structure between the vanadium oxygen layers [46, 47]. They have demonstrated a high reversible specific capacity and a long‐term cycling stability. Mn0.19V2O5·nH2O achieved a reversible capacity of 394.54 mAh g−1 at 0.2 A g−1, whereas Mn0.28V2O5·0.97H2O of 549 mAh g−1 at 0.1 A g−1 (Figure 4b–d). Effects of interlayer spacing of divalent metal‐ion intercalated V2O5 cathode materials. (a) Schematic illustration of synthesis of Ca2+ and Ba2+ into vanadium oxides, reproduced with permission [61], Copyright 2024, Elsevier. (b) CV plots were obtained for the initial three cycles of the Mn0.28V2O5·0.97H2O cathode using a scanning rate of 0.2 mV s−1, (c) GCD profiles at a current density of 0.1 A g−1 for the Mn0.28V2O5·0.97H2O cathode, (d) the cycling properties with crystal structure and energy versus density of states (DOS) schematics of Mn0.28V2O5·0.97H2O at current density of 2 A g−1, reproduced with permission [47], Copyright 2024, ACS. The crystal structure and morphology of Zn0.1V2O5⋅0.7H2O were well maintained even after soaking in ZnSO4 aqueous electrolyte for 30 days, indicating the high compatibility with aqueous electrolytes [62]. Ca containing bilayered vanadium oxide as a cathode material for ZIBs showed an outstanding performance in wet organic electrolytes [63]. Geng et al. [44] group's Mn0.15V2O5·0.72H2O composites with a narrowed direct bandgap achieved a specific capacity of 100 mAh g−1 at 2.0 A g−1 after 3000 cycles, even at −20 °C. A nondrying, antifreezing, tough, flexible battery with high energy density was constructed by Ma et al [48]. Generally, a hydrothermal approach gives metal‐ion intercalated hydrated vanadium oxides, but Kundu et al. [49] utilized a microwave‐assisted approach for the synthesis of Zn0.25V2O5⋅nH2O nanobelts. Unlike typical hydrothermal methods, microwave heating enables rapid and localized dipolar heating of water, causing uniform and fast heating of the reaction medium that triggers the intercalation and exfoliation of V2O5 into Zn x V2O5⋅nH2O nanobelts. Ren et al. [64] prepared Zn‐ions and water intercalated V2O5 nanowires by one‐step stirring. Similarly, Pang et al. [65] introduced metal‐ion inserted vanadium oxide (MVO, M = Zn, K, Na, and Ca) nanoribbons by one‐step stirring, where this synthesis strategy can be easily scaled up. Zhou et al. [61] compared the intercalation of similar divalent metal ions (Ca2+ or Ba2+) in vanadium oxides (Figure 4) and found that Ca2+ intercalated V2O5 outperformed both Ba2+ intercalated V2O5 and pristine V2O5 in electrochemical performance. This work has also provided insight into zinc storage performance determined by multicomponent synergy. Liu et al. [66] examined the catalytic roles of Cu(II) and Mg(II) metal ions in electrochemical performance and found that Cu(II) significantly enhanced zinc‐ion intercalation kinetics, even though their ionic radius is very close. Thus, the radii of the metal ions alone are unlikely to be the sole determining factor in the change in interlayer spacing, with electronic structure and bonding playing a dominant role. Yang et al. [38] further explored the preintercalation of various transition metal ions (Fe2+, Co2+, Ni2+, Mn2+, Zn2+, and Cu2+) into V2O5 and identified Cu0.1V2O5⋅0.08H2O (CuVO) as the most effective. Although transition metal preintercalation during the hydrothermal process did not maximize interlayer spacing (CuVO: 11.45 Å versus VO: 13.83 Å), the enhanced thermal stability of CuVO allowed the lattice structure to remain stable postannealing (CuVO at 300 °C: 11.45 Å versus V2O5 at 300 °C: 10.32 Å). The amount of crystal water in the interlayer space of vanadium oxide also has an important effect on the electrochemical performance. By adjusting the Zn‐to‐V ratio, Gu et al. [42] optimized the crystal water content of Zn x V2O5⋅nH2O, resulting in Zn0.146V2O5⋅0.579H2O, which showed superior electrochemical performance. By adjusting the ratio of the doped metal ion, the structural parameters and interlayer spacing of the material can be controlled. By increasing the Fe content, the sample structure transformed from nanowires to nanobelts [45]. However, too many preintercalated ions can occupy the active Zn storage sites, thereby influencing the battery performance. Increased Mn doping not only hinders ion intercalation/extraction but also leads to structural collapse during cycling [67]. Divalent metal ion intercalation in V2O5 introduces a stronger electrostatic interaction with the host lattice compared to monovalent systems, resulting in enhanced stabilization but adds complexity to diffusion behavior due to higher charge density. Among the reported materials in Table 2, Cu0.1V2O5⋅0.08H2O showed excellent specific capacity due to enhanced electronic conductivity and the pillaring effect of Cu2+, along with the strong Cu—O bond, which stabilizes the framework [38]. Although Cu2+ preintercalation during the hydrothermal process did not maximize interlayer spacing, the enhanced thermal stability of Cu0.1V2O5⋅0.08H2O allowed the lattice structure to remain stable postannealing. TABLE 2Electrochemical performance and interlayer spacing of divalent metal‐ion intercalated V2O5 cathode materials.MaterialCapacity, mAh g−1 Capacity retentionElectrolyteInterlayer spacing, Å Voltage window, VSynthesis methodReference, yearCa0.26V2O5⋅H2O268.76 at 0.05 A g−1 83.00% after 120 cycles at 0.5 A g−1 0.5 M Zn(ClO4)2 solution in a wet organic solvent comprising Facetonitrile11.020.5–1.3Hydrothermal[63], 2023Ca0.25V2O5·nH2O340.00 at a rate of 0.2C96.00% after 3000 cycles at 80C1 M ZnSO4 —0.6–1.6Hydrothermal[60], 2018Ca0.04V2O5⋅1.74H2O400.00 at 0.05 A g−1 100.00% after 3000 cycles at 10 A g−1 3 M Zn(CF3SO3)2 12.480.2–1.6Hydrothermal[43], 2020Ca0.15V2O5⋅2.2H2O489.80 at 0.1 A g−1 201.2 mAh g−1 after 1000 cycles at 3 A g−1 3 M Zn(CF3SO3)2 10.580.2–1.6Hydrothermal[61], 2024 Mn0.2V8O20⋅ 1.12H2O 306.40 at 0.1 A g−1 86.40% after 1000 cycles at 2 A g−1 2 M Zn(CF3SO3)2 10.300.2–1.6Hydrothermal[67], 2023 Mn0.15V2O5· 0.72H2O 367.00 at 0.1 A g−1 153 mAh g−1 after 8000 cycles at 10 A g−1 1 M Zn(ClO4)2 in propylene carbonate (PC)13.260.2–1.7Hydrothermal[44], 2020Mn0.19V2O5·nH2O394.54 at 0.2 A g−1 87.00% after 960 cycles at 4 A g−1 3 M Zn(CF3SO3)2 12.700.2–1.6Hydrothermal[46], 2023 Mn0.28V2O5· 0.97H2O 549.00 at 0.1 A g−1 91.00% after 100 cycles 0.2 A g−1 3 M Zn(CF3SO3)2 10.500.3–1.9Hydrothermal[47], 2024Fe0.13V2O5⋅nH2O427.30 at 0.3 A g−1 102.00% after 1000 cycles2 M Zn (CF3SO3)2 11.000.1–1.6Hydrothermal[45], 2024 Co0.247V2O5⋅ 0·944H2O 432.00 at 0.1 A g−1 90.26% after 7500 cycles at 4 A g−1 20 M LiTFSI along 1 M Zn(TFSI)2 10.700.5–2.3Hydrothermal[48], 2019CuVOH379.00 at 0.5 A g−1 93.00% after 1000 cycles at 4 A g−1 3 M Zn(CF3SO3)2 11.200.2–1.6Hydrothermal[66], 2020 Cu0.1V2O5⋅ 0.08H2O 359.00 at 1 A g−1 88.00% after 10 000 cycles at 10 A g−1 2 M ZnSO4 11.450.3–1.4Hydrothermal and subsequent annealing[38], 2019ZnVO⋅1.2H2O307.10 at 0.1 A g−1 100.00% after 3000 cycles at 4 A g−1 3 M Zn(CF3SO3)2 —0.2–1.6Stirring[64], 2023ZnVO414.80 at 0.1 A g−1 84.40% after 1500 cycles at 2 A g−1 3 M Zn(CF3SO3)2 —0.3–1.3Stirring[65], 2022 Zn0.146V2O5⋅ 0.579H2O 416.00 at 0.1 A g−1 105.00% after 10 000 cycles at 10 A g−1 3 M Zn(CF3SO3)2 13.700.3–1.4Hydrothermal and subsequent freeze‐drying[42], 2022 Zn0.1V2O5⋅ 0.7H2O 463.00 at 0.2 A g−1 88.00% after 20 000 cycles at 10 A g−1 2 M ZnSO4 10.400.3–1.7Hydrothermal[62], 2021Zn0.25V2O5⋅nH2O220.00 at 4.5 A g−1 80.00% after 1000 cycles at 2.4 A g−1 1 M ZnSO4 —0.5–1.4Microwave‐assisted hydrothermal[49], 2016 Electrochemical performance and interlayer spacing of divalent metal‐ion intercalated V2O5 cathode materials. Mn0.2V8O20⋅ 1.12H2O Mn0.15V2O5· 0.72H2O Mn0.28V2O5· 0.97H2O Co0.247V2O5⋅ 0·944H2O Cu0.1V2O5⋅ 0.08H2O Zn0.146V2O5⋅ 0.579H2O Zn0.1V2O5⋅ 0.7H2O These results highlight a tradeoff between structural stability and ion mobility. The other divalent metal ions such as Cd2+, Hg2+, Pb2+, Be2+, etc., are considered toxic and are hence rarely explored in this context. Trivalent Metal‐Ion Intercalation Preintercalation with higher valence state ions has also been shown to act as structural pillars, thereby enhancing stability. The morphology of the electrode material has an influence on the electrochemical performance of aqueous ZIBs, for example, a coral‐like morphology consisting of thin nanosheets through a one‐step hydrothermal process of Cr‐VOH resulted in the fast Zn2+ migration [68]. Dosage of H2O2 during synthesis governs the micromorphology of Al0.15V2O5⋅1.01H2O [50]. As the H2O2 content increased, the pore size gradually enlarged, but exceeding 2 mL led to nanoparticle formation that blocked the pores and caused the disappearance of the tremella‐like morphology of Al0.15V2O5⋅1.01H2O. Similarly, the uniform urchin‐like morphology of Al‐doped V10O24⋅12H2O was in favor of a better electrochemical performance [69]. Hu et al. [70] synthesized yttrium‐ion intercalated VOH (Y–VOH) with a honeycomb porous morphology by a simple sol–gel method. This morphology increases electrolyte‐material contact area, thereby enhancing the electrochemical reactive sites to improve the energy storage capacity. Moreover, the honeycomb‐like porous spherical structure provides a large surface area and facilitates faster ion transport. A facile hydrothermal method was employed to synthesize Ru3+ intercalated vanadium oxide (Ru0.2V2O5·0.41H2O) with excellent rate performance and capacity retention [71]. Table 3 summarizes the electrochemical performance and interlayer spacing of trivalent metal ion intercalated V2O5 cathode materials. Here, Y–VOH with a honeycomb‐like porous spherical structure provided a large surface area and facilitated faster ion transport, resulting in a high specific capacity [70]. Sc3+, In3+, and Bi3+ are other trivalent metal ions, which can be intercalated into vanadium oxide to improve the electrochemical properties of ZIBs. The small trivalent metal ion Sc3+, has high mobility and higher charge density which can contribute to better diffusion and stability, whereas the moderate size In3+ having stable chemistry may show easier insertion than rare‐earth metal ions. Even though Bi3+ is heavy, it may enhance the electronic conductivity. TABLE 3Electrochemical performance and interlayer spacing of trivalent metal‐ion intercalated V2O5 cathode materials.Material Capacity, mAh g−1 Capacity retention Electrolyte Interlayer spacing, Å Voltage window, V Synthesis methodReference, year Al0.15V2O5· 1.01H2O 510.50 at 0.05 A g−1 144 mAh g−1 after 10,000 cycles at 10 A g−1 3M Zn(CF3SO3)2 14.190.1–1.8Hydrothermal[50], 2021 Al‐doped V10O24· 12H2O 415.00 at 0.2 A g−1 98.00% after 3000 cycles3M Zn(CF3SO3)2 13.900.3–1.6Hydrothermal[69], 2019Cr‐VOH 337.40 at 0.05 A g−1 58.10% after 500 cycles at 4 A g−1 3M Zn(CF3SO3)2 10.800.2–1.6Hydrothermal[68], 2021Y–VOH 343.40 at 0.5 A g−1 90.00% after 3000 cycles3M ZnSO4 along with 0.1 M VO2+ 13.600.3–1.6Sol–gel[70], 2024Ru0.2V2O5·0.41H2O 405.80 at 0.2 A g−1 98.20% after 5000 cycles at 10 A g−1 2M Zn(CF3SO3)2 0.2–1.6Hydrothermal[71], 2024 Electrochemical performance and interlayer spacing of trivalent metal‐ion intercalated V2O5 cathode materials. Capacity, mAh g−1 Interlayer spacing, Å Voltage window, V Al0.15V2O5· 1.01H2O 510.50 at 0.05 A g−1 144 mAh g−1 after 10,000 cycles at 10 A g−1 Al‐doped V10O24· 12H2O 415.00 at 0.2 A g−1 337.40 at 0.05 A g−1 343.40 at 0.5 A g−1 405.80 at 0.2 A g−1 Several studies have reported the incorporation of hydrated metal‐ion into vanadium oxide layers which involves the insertion of metal‐ion together with their bound hydration shells as a single entity. Introduction of hydrated Mg2+ ions into vanadium oxides to obtain porous Mg0.34V2O5·0.84H2O nanobelts led to a broad operating voltage window of 0.1–1.8 V versus Zn2+/Zn, highlighting the structural benefits of hydrated metal‐ion intercalation [72]. Tong et al. [73] synthesized V2O5 nanoplates intercalated with hydrated Li+ ions, resulting in a stable lamellar structure with enlarged spacing, reduced interlayer repulsion, and lower molecular weight. A Mn0.5V2O5·2.4H2O cathode was developed by the incorporation of hydrated Mn2+ ions, which modulated the electronic structure, lowered Zn2+ migration barriers, and stabilized the layered framework for prolonged cycling life [74]. Similarly, the intercalation of hydrated Na+ ions into V2O5 not only enhances structural stability, but also lowers the desolvation energy barrier and accelerates ion intercalation kinetics [75]. Hydrated metal‐ion intercalation primarily augments structural stability and reduces electrostatic repulsion, whereas metal‐ion and water cointercalation primarily alters the charge storage mechanism by introducing fast proton kinetics and synergistic dual‐carrier transport, resulting in higher capacity, superior rate capability, and enhanced cycling stability. Single preintercalated metal ions with different charge states, molecular weights, and ionic radii influence the electronic structure, mechanical properties, and ultimately the electrochemical performance in distinct ways. It is noteworthy that the appropriate choice of monovalent, divalent, or trivalent metal ions can increase the number of active sites. However, there is still a lack of systematic studies to determine the optimal choice of metal ion, as each interacts differently with layered vanadium oxides. Gaining a clearer understanding of the electrochemical behavior of guest‐ions in various electrolytes would be highly valuable in addressing these unresolved questions. Metal Ions Intercalation Along With Carbon Additives The inherently low conductivity of vanadium oxide results in substantial resistance polarization in aqueous ZIBs, while the stress from ion (de)intercalation can lead to structural collapse and degrade performance. Integrating vanadium oxide with conductive materials and intercalating metal ions have proven effective in enhancing electrode conductivity, facilitating ion transport, and reducing material dissolution. Graphene, a 2D carbon material, not only enhances the conductivity of electrodes but also stabilizes the original structure of active materials due to its fast electron transport capability and mechanical strength. For example, Ca2+‐intercalated VOH integrated with reduced graphene oxide (rGO)), synthesized via hydrothermal and freeze‐drying methods (Figure 5a), exhibited an enlarged interlayer spacing, improved structural stability, and enhanced conductivity [76]. Similar improvements were observed in Mn2+ inserted VOH nanobelts/rGO composites, where Mn2+ formed an electrostatic network with [VO6] polyhedra to facilitate Zn2+ diffusion, while rGO enhanced conductivity and energy density [78]. In Al0.13V2O5⋅nH2O/rGO, the expanded interlayer spacing promoted Zn2+ (de)intercalation, and the rGO coating improved conductivity and prevented vanadium dissolution [79]. When hybridized with Na x V2O5⋅nH2O, rGO significantly improved electrochemical performance compared to Na2V6O16⋅nH2O [80]. V2O5 nanoribbons wrapped with rGO and intercalated with Mg2+ ions demonstrated impressive electrochemical performance (Figure 5b–e), including a high specific capacity of 530 mAh g−1 at 0.1 A g−1 and outstanding capacity retention of 89% after 5000 cycles at 5 A g−1 [77]. Calcium‐ions intercalation along with carbon additive. (a) Schematic illustration of the synthesis of Ca0.22V2O5⋅nH2O/rGO, reproduced with permission [76], Copyright 2021, RSC. (b) MVG, VOG, and PVO electrode CV curves at 0.1 mV s−1, (c) MVG, VOG, and PVO electrode GCD curves at 0.1 A g−1, (d) rate performance of MVG, VOG, and PVO electrodes at various current densities between 0.1 and 5.0 A g−1, and (e) cyclic performance of MVG, VOG, and PVO electrodes at 5 A g−1, reproduced with permission [77], Copyright 2024, ACS. A MnVO‐0.05–8/GN‐15 composite was synthesized, with Mn2+ increasing the interlayer spacing to 13.6 Å—up from 12.1 Å in pristine V2O5. After incorporating graphene, the spacing reduced to 11.6 Å, indicating that graphene partially penetrated and coated the MnVO structure. This integration resulted in faster Zn2+ diffusion and a high specific capacity of 507.5 mAh g−1 [81]. Carbon‐coated V2O5 nanoflowers with K+ preintercalation was hydrothermally prepared by reducing glucose as the carbon source, followed by high‐temperature annealing [82]. The annealing process improved the crystallinity of V2O5, particularly with increased glucose content during hydrothermal synthesis. With increasing glucose content, the lamellar structure on the edge of the nanoflower gradually shrinks, leading to a corresponding reduction in nanoflower size. The integration of metal‐ion intercalated vanadium oxides with conductive carbon additives significantly enhances electrochemical performance by addressing the intrinsic limitations of vanadium oxide, particularly its low conductivity and structural instability during repeated Zn2+ insertion/extraction. Among these systems (Table 4), Mn‐based vanadium oxides coupled with graphene networks (MnVO‐0.05–8/GN‐15) demonstrated the most remarkable electrochemical behavior, as the redox activity of Mn2+ combined with the high electrical conductivity of graphene creates a synergistic framework that accelerates both ionic and electronic transport [81]. TABLE 4Electrochemical performance and interlayer spacing of metal‐ion intercalated V2O5 cathode materials combined with carbon additives. MaterialCapacity, mAh g−1 Capacity retentionElectrolyteInterlayer spacing, Å Voltage window, VSynthesis methodReference, yearCa0.22V2O5⋅nH2O/rGO409.00 at 0.05 A g−1 90.00% after 2000 cycles at 4.0 A g−1 3 M Zn(CF3SO3)2 13.300.2–1.5Hydrothermal and subsequent freeze‐drying[76], 2021MnVOH/rGO 380.00 at 0.1 A g−1 80.00% after 100 cycles3 M Zn(CF3SO3)2 9.090.2–1.6Hydrothermal[78], 2021KVO‐C3 389.20 at 0.1 A g−1 77.00% after 2000 cycles2 M Zn(CF3SO3)2 0.0–1.6Hydrothermal and subsequent annealing[82], 2022Al0.13V2O5⋅nH2O/rGO 405.00 at 0.1 A g−1 3 M Zn(CF3SO3)2 13.300.2–1.5Hydrothermal and subsequent freeze‐drying[79], 2022rGO/Na0.48V2O5⋅0·36H2O 433.50 at 0.1 A g−1 70.50% over 1000 cycles3 M Zn(CF3SO3)2 10.600.2–1.6Hydrothermal and subsequent freeze‐drying[80], 2019MVG 530.00 at 0.1 A g−1 89.00% after 5000 cycles at 5 A g−1 3 M Zn(CF3SO3)2 0.2–1.6Hydrothermal and subsequent freeze‐drying[77], 2024MnVO‐0.05–8/GN‐15 530.10 at 0.1 A g−1 85.70% after 2000 cycles at 3 A g−1 3 M Zn(CF3SO3)2 11.600.4–1.6Hydrothermal[81], 2024 Electrochemical performance and interlayer spacing of metal‐ion intercalated V2O5 cathode materials combined with carbon additives. 380.00 at 0.1 A g−1 389.20 at 0.1 A g−1 405.00 at 0.1 A g−1 433.50 at 0.1 A g−1 530.00 at 0.1 A g−1 530.10 at 0.1 A g−1 An increase in active material load leads to agglomeration and shedding. However, directly growing active materials on conductive substrates with large surface areas helps prevent agglomeration and shedding, allowing higher mass loading per unit area. Advanced nanostructures such as nanowires, plates, columns, flower arrays increase active surface area, and expose more reactive sites. This enhances mass transfer, reaction kinetics and also ensures greater material utilization. This approach significantly boosts capacity, rate performance, and cycling stability. For example, calcium‐ion intercalated vanadium oxide grown on carbon cloth (CaVOH@CC) showed a high mass load (∼7 mg cm−2), specific capacity of 228.5 mAh g−1 at 1 A g−1, and 70% capacity retention after 800 cycles [83]. Sodium‐intercalated vanadium oxide nanostructures anchored on carbon cloth (Na30V@CC) also exhibited superior capacity, rate capability, and stability [84]. Thus carbon assisted, metal‐ion intercalated vanadium oxides represent a highly promising electrode architecture for next‐generation aqueous ZIBs, particularly for applications requiring high energy density, rapid charge discharge capability, and long operational lifetimes. Metal Ions Intercalation Along With Defect Engineering Introducing appropriate defects into the cathode materials is an effective strategy to enhance the electrical conductivity and electrochemical activity by tuning the distribution of localized electrons and the number of active sites. In vanadium oxides, similar improvements can be achieved by inducing atomic‐scale defects, such as oxygen vacancies (anion defects) and vanadium vacancies (cation defects). The large formation energy of metal‐cation vacancies renders their introduction challenging, and precise control of these vacancies remains difficult [85]. Hence, metal‐cation defective V‐based cathodes for ZIBs are much rarer than anion defects. However, cationic or anionic defects alone have a limited impact on improving electrochemical performance. Therefore, integrating interlayer and defect engineering presents a promising approach to develop high‐capacity, stable vanadium‐based layered oxide cathodes for ZIBs. Li et al. [86] synthesized VOH nanobelts using a simple hydrothermal method assisted by sodium dodecyl sulfate (SDS), as shown in Figure 6a. The SDS not only guided the formation of the nanobelt morphology but also promoted the generation of abundant oxygen vacancies and supplied Na+ ions for preintercalation. As a result of these combined advantages, the nanobelts demonstrated outstanding long‐term cycling stability, delivering a capacity of 193 mAh g−1 after 5000 cycles at a current density of 5 A g−1 (Figure 6b). Mn1.4V10O24·12H2O with oxygen defect prepared by a spontaneous chemical synthesis, delivered a high specific capacity of 456 mAh g−1 at 0.2 A g−1 [87]. Effect of H2O, and H2O2 intercalation along with SDS additive source of Na+. (a) Schematic illustration of the preparation process of VOH‐SDS sample and (b) long‐term cycling performance curves of VOH‐SDS and VOH samples, reproduced with permission [86], Copyright 2024, Elsevier. An optimal amount of metal‐ion intercalation maximizes electrochemical performance by synergistically stabilizing the layered structure, increasing oxygen/vanadium vacancy concentration, and accelerating Zn2+ diffusion. For example, with a moderate amount of Cr3+ incorporation, Cr0.27V2O4.8⋅0.56H2O is conductive to Zn2+ diffusion while maintaining structural stability [88]. In K0.39V2O5·0.52H2O cathode, with optimized amounts of K+ doped and hydrated vanadium oxide, pre‐embedding of K+ ions expanded the interlayer spacing and stabilized the crystal structure, while the presence of oxygen vacancies created additional active sites for Zn2+ storage [89]. Gao et al. [90] developed calcium‐intercalated hydrated vanadium oxide nanobelts featuring cationic vanadium vacancies. Table 5 presents the electrochemical performance and interlayer spacing of metal‐ion intercalated V2O5 cathode materials incorporating defect engineering. Cr0.27V2O4.8⋅0.56H2O, containing a moderate amount of Cr3+ incorporation, has better specific capacity due to the synergistic effects of structural stabilization, defect engineering (oxygen/vanadium vacancies), and accelerated Zn2+ diffusion [88]. TABLE 5Electrochemical performance and interlayer spacing of metal‐ion intercalated V2O5 cathode materials incorporating defect engineering strategies.Material Capacity, mAh g−1 Capacity retentionElectrolyteInterlayer spacing, Å Voltage window, V Synthesis methodReference, year K0.39V2O5· 0.52H2O 552.00 at 0.1 A g−1 90.00% after 11 000 cycles at 10 A g−1 3 M Zn(CF3SO3)2 11.000.3–1.6Hydrothermal[89], 2025VOH‐SDS 363.00 at 0.2 A g−1 193 mAh g−1 after 5000 cycles at 5 A g−1 3 M ZnSO4 12.400.0–1.6Hydrothermal and subsequent freeze‐drying[86], 2024Mn1.4V10O24·12H2O 456.00 at 0.2 A g−1 80.00% after 5000 cycles at 10 A g−1 3 M Zn(CF3SO3)2 13.500.2–1.6Spontaneous chemical reaction[87], 2021CaVO‐5 310.00 at 0.5 A g−1 91.70% after 3000 cycles at 10 A g−1 2 M ZnSO4 12.580.0–1.6Hydrothermal[90], 2022Cr0.27V2O4.8⋅0·56H2O 405.00 at 0.5 A g−1 120.00% after 3500 cycles3 M Zn(CF3SO3)2 0.2–1.4Hydrothermal[88], 2023 Electrochemical performance and interlayer spacing of metal‐ion intercalated V2O5 cathode materials incorporating defect engineering strategies. Capacity, mAh g−1 K0.39V2O5· 0.52H2O 552.00 at 0.1 A g−1 363.00 at 0.2 A g−1 456.00 at 0.2 A g−1 310.00 at 0.5 A g−1 405.00 at 0.5 A g−1 Some groups even integrated vanadium oxide with conductive materials along with intercalating metal ions and introducing defects, like glucose‐derived hydrothermal carbon (GHC) stabilized and transition metal‐ion Mn doped hydrated vanadium oxide composite material [91]. Oxygen vacancies generated by the surface‐anchored GHC and interlayer‐inserted Mn2+ enhanced the number of active sites, improved electronic conductivity, and facilitated ion diffusion. In this structure, GHC maintained external structural integrity, while Mn2+ served as a pillar to support the interlayer framework. As a result, the Mn‐VOH@GHC electrode delivered a high capacity of 530 mAh g−1 at 0.2 A g−1. Such synergistic design—integrating interlayer tuning, vacancy control, and conductive framework support—could potentially push the capacity while maintaining ultra‐long cycle life and high‐rate capability. Cointercalation of Metal Ions and Other Additives Cointercalation of Metal Ions and Organic Additives Organic additives are intercalated into various layered materials to regulate the structure and performance of host materials. Organic additives have larger ionic radii/molecular dimensions than those of metal ions and can effectively manipulate the interlayer spacing of vanadium oxides by adjusting their molecular dimensions. This reduces electrostatic interactions with Zn2+ ions and the VO frameworks which directly enhances Zn2+ diffusion, and offers more active sites for charge accommodation. Indeed, the metal ions and organic cations seem to act concurrently to enhance capacity by partially reducing V5+ to V4+ and/or introducing oxygen vacancies to maintain electro neutrality, though they serve distinct roles when intercalated. A composite material with polyethylene glycol (PEG) and Ba2+ ions preintercalated into V2O5 layers was developed, achieving excellent electrochemical performance [92]. Cointercalation widened the interlayer spacing between adjacent VO layers to 10.7 Å, thereby enhancing Zn2+ transport kinetics. Theoretical studies confirmed the structure's thermodynamic stability, while PEG‐Ba2+ interactions increased the V4+/V5+ ratio, thereby improving structural stability and electronic conductivity. Tong et al. [93] successfully synthesized an iron‐ion and alkylammonium cation cointercalated vanadium oxide through a two‐step intercalation process, as illustrated in Figure 7a. The intercalated iron‐ions enhanced structural stability through electrostatic interactions, while the alkylammonium cations expanded the interlayer spacing and preserved surface hydrophobicity. Together, these effects contributed to a high specific capacitance and excellent cycling stability. Due to the synergistic effect of cointercalated Zn2+ ions and n‐butylamine, the cointercalated sample ZBVO exhibited exceptional electrochemical performance [95]. The Zn2+ ions formed strong Zn—O bonds that acted as structural pillars, while n‐butylamine preserved optimal interlayer spacing, enabling efficient and reversible Zn2+ diffusion. Vanadium oxide co‐preinserted with N(CH3)4 + and Zn2+ ions has been reported as a cathode for ultra‐stable aqueous ZIBs [96]. The presence of organic N(CH3)4 + ions reduce electrostatic interactions between Zn2+ and the host structure, thereby enhancing the reversibility of Zn2+ insertion and extraction and extending cycle life. Guo et al. [97] introduced inorganic Al3+ ions and amphoteric organic‐ions (betaine) into VOH to create an inorganic–organic cointercalated cathode. Both Al3+ and betaine contributed to expanding the interlayer spacing and stabilizing the layered structure. The quaternary ammonium groups in betaine formed strong interactions with lattice oxygen of V2O5, enhancing structural stability, while the polar carboxyl groups weakened Zn2+–V–O interactions, thereby facilitating improved Zn2+ diffusion. Effect of trivalent intercalation, hydration, and additives. (a) Schematic illustration of iron‐ion and alkylammonium cation cointercalated vanadium oxide (FeVO‐12) by a hydrothermal method, followed by ion‐exchange and electrostatic interaction, reproduced with permission [93], Copyright 2022, Elsevier. (b) Schematic illustration of the reaction mechanism of the MgVOH/PANI electrode, reproduced with permission [94], Copyright 2024, Elsevier. The conductive polymer PANI significantly enhances rate capability by constructing electron‐ transport networks. Hu et al. [94] developed a MgVOH/PANI cathode by cointercalating Mg2+ ions and the conductive polymer PANI into hydrated vanadium oxide layers. Mg2+ improved conductivity and expanded interlayer spacing, while PANI mitigated structural strain during cycling and stabilized the layered framework. Additionally, PANI participated in redox reactions (Figure 7), enhancing Zn2+ diffusion and overall electrochemical performance. The cointercalation of K+ ions and PANI into VOH demonstrated a robust interlayer structure and a continuous 3D electron transfer network, enabling efficient Zn2+ diffusion with low migration barriers and fast kinetics [98]. Its interlayer spacing of 10.7 Å, larger than that of VOH but smaller than that of K+ intercalated into VOH or PANI intercalated into VOH, results from strong bonding interactions between K+, oxygen, and nitrogen atoms, optimizing both stability and ion transport. The synergistic pillar effect of Mn2+ and PANI significantly improved the electron and ion transport kinetics in MnVO‐PANI, enabling a high capacity retention of 85% even after 10,000 cycles at a current density of 5 A g−1 [99]. Table 6 presents the interlayer spacing and electrochemical properties of V2O5 cathode materials cointercalated with metal ions and organic additives. Among these, [Al0.16(C5H14ON)0.12]V2O5·0.39H2O, owing to the synergistic combination of Al3+‐induced structural stabilization and organic molecule pillaring, which enlarges the interlayer spacing and facilitates rapid Zn2+ diffusion, exhibits the best specific capacity [97]. TABLE 6Electrochemical performance and interlayer spacing of V2O5 cathode materials cointercalated with metal‐ion and organic additives.MaterialCapacity, mAh g−1 Capacity retentionElectrolyte Interlayer spacing, Å Voltage window, VSynthesis method Reference, year PEG‐Ba0.38V2O5⋅nH2O 340.00 at 0.1 A g−1 98.80% after 4000 cycles at 6 A g−1 2 M ZnSO4 10.700.3–1.4Hydrothermal and subsequent freeze‐drying[92], 2022FeVO‐12 408.00 at 0.1 A g−1 90.00% after 1000 cycles at 10 A g−1 2 M Zn(CF3SO3)2 19.290.3–1.6Hydrothermal[93], 2022MgVOH/PANI 412.00 at 0.1 A g−1 93.00% after 1000 cycles at 2 A g−1 3 M Zn(CF3SO3)2 14.600.2–1.6Hydrothermal[94], 2024ZBVO 417.10 at 0.1 A g−1 93.00% over 5000 cycles at 10 A g−1 3 M Zn(CF3SO3)2 13.500.3–1.6Stirring[95], 2024(C6H4NH)0.27K0.24V2O5⋅0.92H2O 418.30 at 0.1 A g−1 89.50% after 3000 cycles at 5 A g−1 3 M Zn(CF3SO3)2 10.700.2–1.5Hydrothermal and subsequent freeze‐drying[98], 2024 Mn0.18V2O5⋅ 0.13H2O‐0.33PANI 462.00 at 0.1 A g−1 85.00% after 10 000 cycles at 5 A g−1 3 M ZnSO4 13.600.3–1.6Hydrothermal[99], 2022 ([N(CH3)4]0.77,Zn0.23)V8O20· 3.8H2O 303.40 at 0.2 A g−1 99.50% after 2000 cycles at 8 A g−1 3 M Zn(CF3SO3)2 11.200.3–1.5Hydrothermal[96], 2021 [Al0.16(C5H14ON)0.12]V2O5· 0.39H2O 549.50 at 0.2 A g−1 80.10% after 20 000 cycles at 30 A g−1 3 M Zn(CF3SO3)2 13.700.2–1.6Hydrothermal[97], 2025 Electrochemical performance and interlayer spacing of V2O5 cathode materials cointercalated with metal‐ion and organic additives. Interlayer spacing, Å Reference, year 340.00 at 0.1 A g−1 98.80% after 4000 cycles at 6 A g−1 408.00 at 0.1 A g−1 90.00% after 1000 cycles at 10 A g−1 412.00 at 0.1 A g−1 93.00% after 1000 cycles at 2 A g−1 417.10 at 0.1 A g−1 418.30 at 0.1 A g−1 89.50% after 3000 cycles at 5 A g−1 Mn0.18V2O5⋅ 0.13H2O‐0.33PANI 462.00 at 0.1 A g−1 85.00% after 10 000 cycles at 5 A g−1 ([N(CH3)4]0.77,Zn0.23)V8O20· 3.8H2O 303.40 at 0.2 A g−1 99.50% after 2000 cycles at 8 A g−1 [Al0.16(C5H14ON)0.12]V2O5· 0.39H2O 549.50 at 0.2 A g−1 80.10% after 20 000 cycles at 30 A g−1 The synergistic strategy of combining organic molecules and inorganic‐ions, along with appropriate defects, improved the kinetic and structural stability of aqueous battery cathodes. Zong et al. [100] cointercalated metal ions (Zn2+) and organic‐ions (Ch+) into layered V2O5 to enhance its performance as a cathode material. This coinsertion strategy, combined with the introduction of oxygen vacancies, effectively expanded the interlayer spacing, increased the number of active sites for Zn2+ intercalation, and improved both electronic and ionic conductivity. In this system, Zn2+ ions act as structural pillars to stabilize the V–O layers, while the organic‐ions reduce electrostatic interactions, thereby accelerating reaction kinetics and enhancing structural stability. Increasing interlayer spacing in V2O5 enhances capacity performance, but excessive expansion can destabilize the structure, leading to collapse during cycling and can reduce stability [96]. Additionally, side reactions at the cathode/electrolyte interface can cause vanadium dissolution, further compromising structural integrity and cycle life [101]. To address these issues, combining organic polymer coatings with V2O5 has proven effective. For example, CaVO/PANI composites‐formed by intercalating Ca2+ and applying a PANI coating‐enhanced structural stability, improved conductivity, and suppressed vanadium dissolution, achieving 233 mAh g−1 at 10 A g−1 and 93% capacity retention over 6000 cycles [102]. Similarly, Liu et al. [103] developed a La3+ and phytic acid‐modified V2O5 (LPVO) composite, where La3+ expanded interlayer spacing, and phytic acid coating reinforced structural stability and reduced vanadium loss during cycling. A highly promising strategy to further improve ZIB performance is to integrate metal‐ion intercalation, organic molecule pillaring, defect engineering, and surface polymer protection into a single hierarchical design. Cointercalation of Metal Ions and Nonmetallic Species Compared to metal ions, nonmetallic cations such as NH4 + and H+ possess lower molecular weights, thereby contributing to a higher theoretical capacity. However, incorporating a single type of interlayer cation may be insufficient to achieve optimal Zn2+ storage performance. To address this limitation, the introduction of mixed interlayer cations has emerged as a promising strategy to further enhance the electrochemical properties of hydrated V2O5. For instance, the coinsertion of Ni2+ and NH4 + into V2O5·3H2O not only expanded the interlayer spacing but also significantly improved Zn2+ transport kinetics [104]. Additionally, the synergistic “pillar” effect of Ni2+ and NH4 + increased oxygen vacancy concentration, effectively lowering the energy barrier for Zn2+ insertion. As a result, the electrode demonstrated a high specific capacity of 398.1 mAh g−1 at 1.0 A g−1 and excellent cycling stability, retaining 89.1% of its capacity after 2000 cycles at 5.0 A g−1. Moreover, a ternary hybrid cointercalated vanadium oxide cathode incorporating H2O, NH4 +, and Na+ has been developed, which collaboratively enhanced the number of active Zn2+ storage sites, stabilized the lattice structure, and facilitated Zn2+ migration [105]. Owing to these synergistic effects, the cathode achieved near‐theoretical capacity at low current density and exhibited superior rate performance. Heteroatom doping is also an effective strategy for introducing defects and enhancing the performance of vanadium‐based cathode materials. In 2023, Qian et al. [106] developed nitrogen‐doped, Mn preintercalated hydrated V2O5 (N‐MVO) via nitrogen plasma treatment. The Mn‐ions and strong V—N bonds stabilized the structure, while nitrogen‐induced oxygen vacancies weakened Zn2+–host interactions, improving rate capability and cycling stability. Another study reported partially nitrided, calcium‐doped vanadium oxide, in which nitrogen doping enhanced conductivity, and Ca2+ intercalation expanded the interlayer spacing [107]. This combination yielded a high capacity of 418.5 mAh g−1 at 0.1 A g−1 and 81.2% retention after 500 cycles at 2.0 A g−1. Chalcogenides like S2−, Se2− can substitute lattice oxygen rather than intercalate, creating oxygen vacancies and V—S (V—Se) bonds that narrow the bandgap, enhance electronic conductivity, and improve redox kinetics. Introduction of halide anions such as F− and Cl− may also improve the electrochemical properties of vanadium oxide. F− can substitute oxygen and create V—F bonds, which can increase the electronic conductivity and stabilize the structure. Cl− occasionally intercalates electrostatically. Multi‐Ion Intercalation Recently, dual‐ or multi‐ion intercalation has been used to improve the overall performance of ZIBs in diverse application demands. Different metal ions interact uniquely with the vanadium oxide framework, resulting in varied impacts on its electrochemical behavior. Therefore, the coinsertion of heterovalent cations is anticipated to produce coordinated or synergistic enhancements in structural stability, ion transport, and capacity. Chen et al. [108] developed a Zn2+ and Mg2+ codoped V2O5 cathode that achieved 76.1% capacity retention after 6000 cycles at 10 A g−1. In this system, abundant Zn2+ ions enabled rapid Zn2+ storage and release during cycling, while preinserted Mg2+ acted as a structural pillar to expand the layer spacing, resulting in excellent cyclic stability. Different from single metal‐ion insertion, the size of the inserted metal‐ions is not only the determining factor in altering the interlayer spacing for multi‐ions. The change in the interlayer spacing can also be altered by electrostatic attraction of the inserted metal ions with the framework oxygen [109, 110, 111]. K+ and Al3+ were simultaneously preinserted into vanadium oxide to form robust K0.098Al0.12V2O5⋅0.86H2O nano‐microspheres with a large interlayer spacing of 13.26 Å [109]. Although the ionic radius of K+ (1.38 Å) is higher than that of Al3+ (0.54 Å), the interlayer spacing of K+ into VOH (10.8 Å) is lower than that of Al3+ into VOH (14.3 Å). This is due to the higher ionic character of the K—O bond; it has a stronger binding energy, resulting in a lower interlayer spacing. Similarly, when Feng et al. [110] inserted Mg2+ and K+ into the VOH layer at the same time, the binding energies neutralized each other, resulting in a K0.09Mg0.03V2O5⋅nH2O layer spacing of 11.4 Å, identical to pristine VOH (Figure 8a). The Zn (de)intercalation mechanism in K0.09Mg0.03V2O5⋅nH2O, with both Mg2+ and K+ coinserted into the V–O interlayer, is illustrated in Figure 8b. Li et al. [111] coinserted the monovalent‐ion K+ and the divalent‐ion Ca2+ into VOH (K0.02Ca0.18V2O5⋅0.7H2O), its interlayer spacing is only slightly smaller than that of Ca2+ into VOH due to the relatively small amount of inserted K+ ions. This indicates that the quantity of inserted metal ions is closely related to the variation in interlayer spacing. Li et al. [112] introduced Ni2+ into the KVOH cathode material, where K+ is intercalated into VOH, to form a modified KNiVOH compound. The incorporation of Ni2+ enhanced the electronic conductivity and facilitated Zn2+ intercalation kinetics, while also stabilizing the K—O bond by reducing its formation energy. As a result, KNiVOH exhibited a higher specific capacity of 275 mAh g−1 at 5 A g−1, outperforming the original KVOH (266 mAh g−1). Effect of mixed intercalation and hydration. (a) MgVOH, KVOH, and KMgVOH (K0.09Mg0.03V2O5⋅nH2O) crystal structures and (b) schematic diagram of the Zn (de)intercalation mechanism in the K0.09Mg0.03V2O5⋅nH2O electrode, reproduced with permission [110], Copyright 2022, Elsevier. Vanadium oxide nanobelts preintercalated with Na+ and Ca2+ were obtained via a simple solution impregnation method, and the synthesis strategy could be scaled up [113]. The presence of interlayer water molecules is inevitably introduced during the intercalation process of Na+ and Ca2+ ions. Although the presence of water molecules act as a “lubricant” to promote movement of Zn2+ ions, the presence of more water molecules can weaken the interlayers. By increasing the calcination temperature, the amount of interlayer water molecules decreases and the crystallinity of the nanobelt increases, but beyond a temperature of 400 °C, it shows cracks due to the structure shrinkage. TiK‐VOH, a bimetallic‐ion system with Ti4+ and K+ co‐preintercalated into VOH, features a lamellar, fish scale‐like structure synthesized using a simple sol–gel method [114]. The high charge density of Ti4+ enhances electron attraction within the V–O layers and modulates the interlayer spacing, thereby improving Zn2+ diffusion and structural stability. Simultaneously, K+ boosts electrical conductivity and accelerates charge transfer during electrochemical reactions. Jiang et al. [115] developed a “dual‐ion‐in‐sequence” intercalation strategy, successfully implemented through thermal quenching, to synthesize the Li@MnVO cathode material. Li@MnVO have Mn‐ and Li‐ions intercalation together with abundant defects formed on the surface/subsurface. Electrochemical performance and interlayer spacing of multi‐ion intercalated vanadium peroxide cathode materials are summarized in Table 7. The high specific capacity of NCVO‐350 is attributed to the preintercalated bimettalic‐ions within the layers that was generally added to enhance the structural stability of vanadium oxide [113]. TABLE 7Electrochemical performance and interlayer spacing of multi‐ion intercalated V2O5 cathode materials.MaterialCapacity, mAh g−1 Capacity retentionElectrolyteInterlayer spacing, Å Voltage window, VSynthesis methodReference, yearK0.098Al0.12V2O5⋅0.86H2O424.00 at 0.05 A g−1 96.00% after 3000 cycles at 5 A g−1 3 M Zn(CF3SO3)2 13.260.2–1.6Hydrothermal[109], 2024K0.09Mg0.03V2O5⋅nH2O423.00 at 0.1 A g−1 222 mAh g−1 after 2000 cycles at 4 A g−1 3 M Zn(CF3SO3)2 11.400.2–1.5Hydrothermal[110], 2022TiK‐VOH393.40 at 0.2 A g−1 94.00% after 2000 cycles3 M Zn(CF3SO3)2 12.100.3–1.6Sol–gel[114], 2024(Zn0.09,Mg0.09)V2O5·0.81H2O ~450.00 at 0.2 A g−1 76.10% after 6000 cycles at 10 A g−1 2 M Zn(CF3SO3)2 12.400.2–1.8Hydrothermal[108], 2025K0.02Ca0.18V2O5⋅0.7H2O410.00 at 0.3 A g−1 265 mAh g−1 after 1800 cycles at 5 A g−1 3 M Zn(CF3SO3)2 0.3–1.5Hydrothermal[111], 2024NCVO‐350310.00 at 0.5 A g−1 100.00% after 200 cycles 0.5 A g−1 2 M Zn(CF3SO3)2 0.2–1.6Solution impregnation and subsequent freeze‐drying[113], 2022KNiVOH275.00 at 5 A g−1 3 M Zn(CF3SO3)2 11.000.2–1.6Hydrothermal[112], 2022 Electrochemical performance and interlayer spacing of multi‐ion intercalated V2O5 cathode materials. Ma et al. [116] successfully synthesized a tri‐metal‐ion intercalated cathode material (KMgAl‐VOHs) via a simple one‐step hydrothermal method by doping alkali metal‐ion K+, alkaline earth metal‐ion Mg2+, and trivalent metal‐ion Al3+. Benefiting from the synergistic effect of these preintercalated ions, the optimized tri‐metal‐ion hydrated V2O5 cathode delivers a high specific capacity of 382.4 mAh g−1 at 0.5 A g−1 and demonstrates excellent long‐term cycling stability with 86% capacity retention after 2000 cycles at a high current density of 10 A g−1. By adjusting the relative proportions of monovalent, divalent, and trivalent metal ions, which differ in electronegativity and ion size, an optimal interlayer spacing for a stable structure and a uniform morphology can be achieved to enhance Zn2+ transport kinetics. With the increase of K+ ions and the decrease of Mg2+, the interlayer space decreases gradually. The size of microspheres gradually increases with increase of intercalated K+, whereas the nanowires on the surface of KMgAl‐VOHs microspheres narrows. Also the embedding of Mg2+ and Al3+ results in maintaining a rough surface of the microsphere and thinner surface nanostructures, respectively. Based on the summarized results, another promising strategy to enhance battery performance would be the design of a multi‐ion preintercalated hydrated V2O5 system that combines high charge density cations with conductivity while precisely regulating interlayer water content through controlled thermal treatment. The insertion of monovalent metal ions can slightly reduce the VO layer spacing and play a supporting role between the layers to stabilize the framework. Divalent metal ions effectively expand the lattice spacing and enhance the electrical conductivity and Zn2+ diffusion. Moreover, trivalent metal ions are beneficial for buffering lattice volume changes during cycling and increasing the proportion of V4+. However, the underlying mechanisms responsible for the performance enhancement in multi‐ion engineering strategies are still not fully understood and warrants further systematic investigation. Design Principles for Preintercalated V2O5 Cathodes Building on the mechanistic understanding established throughout this review, preintercalation in V2O5 can be rationalized as a coupled structural–electrostatic design problem, rather than a purely compositional modification. The performance of preintercalated V2O5 cathodes emerges from the interplay between interlayer geometry, electrostatic screening, and redox‐active lattice dynamics. From this perspective, the following design principles can be defined. Interlayer Spacing as a Tunable Transport Parameter The interlayer distance is the primary structural descriptor governing Zn2+ diffusion. Optimal performance is not achieved by maximizing spacing, but by balancing accessibility and structural coherence. Excessive expansion weakens interlayer interactions and promotes structural collapse, whereas insufficient spacing leads to strong electrostatic trapping of Zn2+. Preintercalated species should therefore act as mechanically robust pillars that maintain an intermediate interlayer spacing (typically ∼10–13 Å in hydrated systems), enabling fast ion transport while preserving long‐term cycling stability. As highlighted earlier, this spacing is codetermined by the ionic radius, hydration shell, and concentration of the intercalant. The “intermediate interlayer spacing” refers to an empirically observed spacing window rather than a theoretically optimized value. Based on the hydrated and preintercalated V2O5‐based cathodes summarized in this review, many high‐performing systems exhibit interlayer distances in the approximate range of 10–13 Å. This range reflects a balance between two competing effects: insufficient spacing strengthens steric confinement and Zn2+–host electrostatic interactions, whereas excessive expansion may weaken interlayer cohesion and compromise structural stability. Therefore, the ∼10–13 Å range should be considered a practical experimental guideline for hydrated V2O5 systems, not a universal structural requirement for all layered oxides. Electrostatic Screening and Effective Charge Reduction A defining feature of aqueous Zn2+ systems is the strong Coulombic interaction between divalent ions and the oxide lattice. Effective design requires modulating the local electrostatic potential landscape. Preintercalated ions and structural water jointly act as electrostatic mediators, reducing the effective charge of Zn2+ through: (1) dielectric screening; (2) solvation effects; and (3) charge redistribution within the lattice. This results in lower diffusion barriers and improved reversibility, particularly in hydrated V2O5 phases where water behaves as an active electrostatic component rather than a passive spacer. Charge Density and Ionic Size Matching The selection of preintercalated species must consider both ionic radius and charge density, as these jointly determine interaction strength with the host lattice (Figure 9): (1) monovalent metal ions (e.g., K+) provide weak electrostatic interaction, facilitating Zn2+ mobility and enhancing rate capability; (2) divalent metal ions (e.g., Ca2+, Mn2+, Cu2+) introduce stronger binding, improving structural stability but potentially increasing diffusion barriers; and (3) oversized monovalent metal ions (e.g., Cs+) may stabilize the structure but hinder ion transport due to steric effects. Thus, optimal performance arises from intermediate charge density and size, where structural stabilization does not compromise ion kinetics. Transferability of preintercalation design principles beyond V2O5‐based aqueous ZIBs. The schematic illustrates how the descriptor‐based framework established for hydrated V2O5 cathodes—including interlayer spacing regulation, electrostatic screening, guest‐ion charge density/pillaring, migration‐barrier reduction, and improved electronic transport—can be extended to other layered or open‐framework metal‐battery systems. These principles remain relevant for monovalent systems (Na+, K+), multivalent systems (Mg2+, Ca2+), and high‐charge or hybrid‐ion systems (e.g., Al3+), although their relative importance and optimal values depend on the host structure, electrolyte chemistry, and solvation/desolvation environment. The figure highlights that the framework is transferable but not universal, providing generalizable descriptors while requiring system‐specific optimization. Synergistic Role of Structural Water Structural water is a critical, nontrivial design parameter. Rather than being treated as a byproduct of synthesis, it should be deliberately engineered. Water molecules: (1) expand interlayer spacing; (2) provide additional coordination sites; (3) reduce Zn2+–lattice interaction strength; and (4) homogenize the electrostatic field. However, excess water weakens interlayer cohesion, while insufficient water increases diffusion barriers. Therefore, an optimal hydration level must be maintained, enabling a “lubricated” diffusion environment without structural degradation. Electronic Structure and Mixed Valence Control Preintercalation modifies not only the structure but also the electronic landscape of V2O5, particularly through the V5+/V4+ ratio. An increased V4+ content: (1) boosts electronic conductivity; (2) promotes electron hopping; and (3) enhances redox kinetics. Thus, effective design requires coupling ionic and electronic transport, ensuring that improvements in Zn2+ mobility are matched by sufficient electronic conductivity. Occupancy Versus Accessibility A critical limitation of preintercalation is the partial occupation of active sites. While intercalants stabilize the structure, excessive loading reduces the number of available Zn2+ storage sites. This leads to a fundamental tradeoff: (1) higher intercalant concentration → better stability and (2) lower intercalant concentration → higher capacity. Optimal systems therefore operate in a substoichiometric regime, where interlayer stabilization is achieved without significantly compromising storage capacity. Multicomponent and Cooperative Intercalation The highest‐performing systems often arise from synergistic multispecies intercalation, where: (1) metal ions provide structural rigidity; (2) water molecules enable electrostatic screening; and (3) organic or polymeric species tune spacing and flexibility. Such cooperative effects generate emergent behavior not accessible through single‐component systems, including enhanced cycling stability, rate capability, and tolerance to structural distortion. Toward a Unified Design Map These principles collectively define a multidimensional design space, where performance is governed by the coupling between: (1) interlayer spacing; (2) electrostatic environment; (3) ionic size and charge; (4) hydration level; and (5) electronic structure. Rather than optimizing individual parameters independently, future strategies should adopt a holistic design approach, targeting the simultaneous control of structural and electrostatic variables (Figure 9). Preintercalation operates through a coupled structural–electrostatic–solvation mechanism. To clarify the generality of this mechanism, preintercalation can be described using a simple descriptor‐based framework rather than a material‐specific rule. In layered V2O5 and related oxides, the ease of Zn2+ or multivalent‐ion migration is governed by the balance between interlayer opening, electrostatic screening, lattice stabilization, and preservation of accessible storage sites. This relationship can be qualitatively expressed as where Ea is the apparent ion‐migration barrier, dinter is the interlayer spacing, zeff is the effective charge of the migrating ion after solvation and screening, εloc reflects the local dielectric/electrostatic screening environment, nH2O represents the contribution of structural water, Klayer describes the mechanical rigidity of the oxide layers, Δϕdist represents the distortion or excessive structural constraint, θguest represents the fraction of interlayer sites occupied by preintercalated species, and σe is the electronic conductivity or redox accessibility of the host. Within this framework, preintercalation improves ion storage when it expands or stabilizes the interlayer gallery, screens the strong electrostatic interaction between multivalent ions and the oxide framework, and suppresses irreversible layer collapse during cycling. However, excessive or strongly bound guest species may reduce performance by occupying active sites, increasing local migration resistance, or inducing lattice distortion. Therefore, the optimum preintercalated structure is not necessarily the one with the largest interlayer spacing, but the one that achieves the best compromise between spacing, electrostatic screening, structural rigidity, hydration, and site accessibility. The phenomenological expansion is as follows The diffusion equation is as follows where E0 is the unmodified apparent ion‐migration barrier. We have written the model in terms of zeff2 εloc, rather than simply zeff2, because the electrostatic contribution to ion trapping, desolvation, and polarization scales approximately with the square of the effective ionic charge and is reduced by the local dielectric/electrostatic screening environment. Thus, structural water and preintercalated species influence transport not only by expanding the interlayer spacing, but also by lowering the effective electrostatic penalty for Zn2+ migration. This descriptor‐based diffusion model, as in Equations (1) – (3), also explains why different guest species lead to different electrochemical outcomes. Monovalent metal ions generally provide moderate electrostatic interaction and efficient spacing regulation; divalent metal ions can offer stronger lattice stabilization but may increase ion–host interaction strength; trivalent metal ions or highly polarizing ions can further stabilize the framework but require careful control to avoid excessive trapping or site blocking. Structural water acts as an additional electrostatic mediator by weakening Zn2+–host interactions and facilitating smoother ion transport. These descriptors are common to other layered oxide cathodes, including hydrated manganese oxides, molybdenum oxides, and mixed transition‐metal oxides, suggesting that the framework can guide preintercalation design beyond V2O5 based zinc‐ion systems. Structural water should therefore be regarded as a particularly effective electrostatic mediator in hydrated V2O5‐based cathodes, but not as a universally transferable requirement for all layered oxide systems. Its beneficial role is most evident in aqueous ZIBs, where interlayer water simultaneously expands the gallery spacing, weakens Zn2+‐host electrostatic interactions, participates in hydrogen‐bond‐assisted transport, and reduces the effective ion‐migration penalty. In nonaqueous or low‐water‐content systems, these functions may be significantly reduced or absent, and Zn2+ transport may depend more strongly on lattice channels, host—guest bonding, and the desolvation environment imposed by the electrolyte. Therefore, the structural‐water mechanism should not be directly extrapolated to water‐deficient systems without further experimental or computational validation. Instead, similar electrostatic‐screening and lattice‐stabilizing effects may need to be introduced through alternative interlayer species, such as organic molecules, polymer pillars, ionic‐liquid‐derived species, or solvated metal‐ion complexes. This represents an important direction for extending preintercalation design principles beyond hydrated V2O5 and aqueous ZIB systems. Related oxide‐interface and solid–electrolyte studies further support this broader view by showing that oxide work functions, interfacial electrochemistry, and the distinction between dielectric oxides and solid electrolytes are central to energy‐storage performance [117, 118, 119]. Recent studies on inorganic–organic cointercalated vanadates, polyaniline‐intercalated vanadium oxides, alcohol‐molecule‐coupled aqueous zinc‐ion cathodes, and organic‐intercalation‐engineered V2CT x MXene further illustrate that alternative organic, polymeric, or molecular spacers can regulate interlayer chemistry, ion migration, and structural stability beyond simple hydrated V2O5 systems [120, 121, 122, 123]. A comparative perspective among the main modification strategies highlights that no single approach simultaneously optimizes cost, structural stability, and electrochemical performance (Table 8). Simple metal‐ion preintercalation is generally the most cost‐effective and scalable route, as it commonly relies on hydrothermal or stirring methods using relatively inexpensive alkali or alkaline‐earth salts. Its main advantage is the stabilization of the V2O5 interlayer galleries through pillaring and electrostatic regulation, although excessive guest‐ion loading may block active Zn2+ storage sites or introduce lattice strain. Defect engineering provides a more direct route to tune electronic structure, increase active sites, and accelerate Zn2+ diffusion through oxygen vacancies, vanadium vacancies, or heteroatom‐induced charge redistribution. However, it requires more precise control of defect concentration, since excessive defects may compromise long‐range structural integrity. Carbon composite strategies are particularly effective in overcoming the low intrinsic electronic conductivity of vanadium oxides, while also buffering mechanical stress, suppressing particle aggregation, and improving high‐rate performance. Their main limitation is the greater processing complexity associated with conductive additive integration, freeze‐drying, annealing, or multistep composite formation. Therefore, in terms of cost and scalability, the approximate ranking is preintercalation > defect engineering > carbon composites; in terms of electronic/kinetic enhancement, carbon composites and defect engineering generally outperform preintercalation alone; and in terms of balanced overall performance, hybrid architectures that combine controlled preintercalation, moderate defect engineering, and conductive carbon networks are the most promising. TABLE 8Comparative ranking of V2O5 modification strategies in aqueous Zn‐ion battery cathodes.StrategyCost/ScalabilityStructural stabilityElectrochemical performanceMain limitation Representative recent referencesMetal‐ion preintercalationHighHigh, through interlayer pillaringModerate to highMay not fully solve poor electronic conductivity[38, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 108, 109, 110, 111, 112, 113, 114]Defect engineeringModerateModerate to high if defect density is controlledHigh, due to improved kinetics and active sitesExcess defects may destabilize the lattice[85, 86, 87, 88, 89, 90, 91]Carbon compositesModerate to lowHigh, due to mechanical bufferingHigh, especially at high rateMore complex processing[76, 77, 78, 79, 80, 81, 82, 83, 84]Hybrid strategiesModerateVery highHighest overall balanceRequires careful synthetic optimization[91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 108, 109, 110, 111, 112, 113, 114] Comparative ranking of V2O5 modification strategies in aqueous Zn‐ion battery cathodes. Conclusion and Perspectives Metal ion preintercalation is an effective strategy in addressing structural instability and limited interlayer spacing in V2O5 which also enhance overall electrochemical performance of aqueous ZIBs. Structural water plays a pivotal role in regulating the crystal structure and electrochemical properties of V2O5⋅nH2O and related M x V2O5·nH2O cathodes for aqueous ZIBs. When combined with preintercalated metal ions, structural water synergistically boosts electronic conductivity, Zn2+ transport, and mitigates structural degradation during long‐term cycling. However, excessive hydration leads to weakened interlayer bonding and structural instability. The insertion of monovalent metal ions can slightly contract the V2O5 layer spacing while acting as interlayer supports. In contrast, divalent metal ions expand the lattice spacing; enhance the electrical conductivity and Zn2+ diffusion. Moreover, trivalent metal ions help buffer lattice volume changes during cycling and increase the V4+ content. Hydrated metal‐ion intercalation primarily enhances structural stability and alleviates electrostatic repulsion, while cointercalation of metal ions and water fundamentally modifies the charge‐storage mechanism by introducing fast proton kinetics and synergistic dual‐carrier transport, resulting in higher capacity, superior rate capability, and enhanced cycling stability. However, too many preintercalated ions can occupy the active Zn2+ storage sites and reduce the capacity and battery performance. The integration of conductive materials addresses the intrinsic low conductivity of vanadium oxide. It enhances ion transport, reduces polarization resistance, and mitigates structural degradation during cycling. Moreover, the introduction of oxygen vacancies and cationic defects has proven effective in enhancing electronic conductivity, active intercalation sites and promoting faster ion migration. The combined strategy of metal‐ion intercalation and these engineering has led to significant improvements in specific capacity and long‐term cycling stability, as reported in several studies. The cointercalation of metal ions and organic additives into V2O5 cathodes synergistically augments structural stability, ion diffusion, and specific capacity. Organic additives increase interlayer spacing, facilitate Zn2+ transport and increase active sites, while metal ions stabilize the structure through electrostatic interactions. This combination boosts ionic and electronic conductivity, suppresses vanadium dissolution, and enhances cycling stability by mitigating side reactions at the cathode/electrolyte interface. The introduction of mixed interlayer cations has emerged as a promising strategy to further enhance the electrochemical properties of V2O5. The insertion of multiple metal ions with different valence states is anticipated to produce coordinated or synergistic enhancements in structural stability, ion transport, and capacity. By adjusting the relative proportions of monovalent, divalent, and trivalent metal ions, which differ in electronegativity and hydrated ion size, an optimal interlayer spacing, a stable structure, and a uniform morphology can be achieved, thereby enhancing Zn2+ transport kinetics. Cointercalation of metal ions with MXene into hydrated vanadium oxide can make a better cathode material for ZIBs. 2D MXene, which has a flexible, hydrophilic surface with a layered structure similar to that of layered V2O5, can act as a conductive highway with a strong mechanical spacer that can be an antirestacking agent. While cointercalation ions or molecules have different physicochemical properties, their functional mechanisms are categorized into three primary mechanisms. First, ions tend to occupy specific sites within the host structures and act as pillars between V2O5 layers, thereby widening the interlayer spacing and enhancing structural stability. Second, the presence of high‐valence metal ions or larger molecules between the V2O5 layers helps shield electrostatic interactions between Zn2+ ions and the VO framework. This shielding enhances Zn2+ diffusion kinetics, allowing better accessibility of Zn2+ ions to the vanadium oxide structure. Finally, the intercalated ions or molecules provide additional storage sites for Zn2+, a mechanism particularly observed in organic‐intercalated and defect‐engineered vanadium oxides. The reversible cointercalation of solvated molecules in preintercalated cathodes of aqueous ZIBs has been reported in the literature. However, their effects and underlying mechanisms remain unclear, particularly regarding their impact on structural stability after prolonged cycling. Therefore, a deeper understanding of the role of guest‐ions or molecules influencing redox behavior within the battery system is still required. There is still a general lack of understanding regarding the optimal amount of crystal water needed to achieve enhanced electrochemical performance. Additionally, an excessive amount of structural water can expand the interlayer spacing of vanadium oxides, leading to the dissolution of active materials and the eventual collapse of the layered structure. Thus, it is crucial to determine the precise balance between structural stability and rapid ion kinetics. Since both anion and cation defects can improve electrochemical performance, it is important to find new ways to create vanadium oxide cathodes with precise control over the types, amounts of defects, where these defects are located and how they move within the vanadium oxide structure during repeated cycling. Some of the major directions that can significantly shape the next generation of V2O5‐based cathode materials in these aspects are atomic‐level in operando characterization using XRD, XPS, TEM, and synchrotron‐based XAS to understand the interaction of metal ions with V2O5 layers during intercalation, cycling, and redox processes through ion migration pathways. Further, integrating computational tools such as DFT with molecular dynamics (MD) to simulate long‐term stability and Zn2+ diffusion kinetics along with machine learning (ML) algorithms to predict optimal intercalants, concentration windows, and synergistic combinations. The instability of vanadium compounds in certain electrolytes remains a major drawback, including low ionic conductivity in organic electrolytes, a higher freezing point (about −10 °C) in aqueous electrolytes, and dendrite formation in alkaline electrolytes. However, using a neutral or low‐acidic electrolyte, a solid electrolyte, or a solvent mixture could potentially resolve these issues. High concentration electrolytes are also ideal for inhibiting the dissolution of electrode materials and broadening the voltage window of aqueous ZIBs but they often cause slow diffusion kinetics, leading to unsatisfactory capacity and rate performance. Therefore, it is important to develop a high‐performance electrolyte that is compatible with high performance electrode material. It is widely agreed that controlling the microstructure and texture of vanadium oxide particles is key to improving their electrochemical performance. However, several lab‐scale synthesis methods are difficult to scale up for commercial productions. At the same time, creating nanostructures or nanoparticles with larger surface area for electrolyte exposure can increase specific capacity through pseudocapacitive effects. These advancements emphasize the value of synergistic design approaches in the development of high‐performance energy storage materials. With ongoing exploration of novel material combinations and fabrication techniques, vanadium oxide‐based composites hold strong promise for next‐generation aqueous ZIBs and other sustainable energy storage technologies. Author Contributions Anagha P. Vincent: writing – original draft, conceptualization, literature review, formal analysis. P. Vipin Kumar: writing – original draft, conceptualization, literature review, formal analysis. S. B. Gudennavar: writing – review and editing, supervision, resources. B. S. Nishchith: writing – review and editing, supervision, resources. S. G. Bubbly: conceptualization, writing – review and editing, supervision, resources. Maria Helena Braga: writing – review and editing, visualization, funding acquisition, supervision, resources. Funding This study was supported by CHRIST (Deemed to be University) (Grant CU‐ORS‐SM‐24/19), Government of India, New Delhi (Grant DST/INSPIRE Fellowship/2024/IF240147), PRR ‐ Recovery and Resilience Plan and the European Union's NextGeneration EU funds (Grant C644936001‐00000045), Fundação para a Ciência e a Tecnologia (FCT) (Grant UID/50022/2025 – Thematic line 6), and Universidade do Porto. Conflicts of Interest The authors declare no conflicts of interest.