Lowering technical barriers in microbiology education using archaea: Halobacterium salinarum as a school laboratory model Published: 2026 ABSTRACT AbstractTraditional microbiology education is fundamentally constrained by the requirement for sterile laboratory conditions, which limits the implementation of practical activities in school settings. This limitation can be overcome by using Halobacterium salinarum, a halophilic archaeon that grows readily on media containing up to 5 mol·l⁻¹ (290 g·l⁻¹) sodium chloride, effectively preventing contamination. Moreover, this micro-organism is non-pathogenic and well suited for educational use.This article presents two simple hands-on activities that can be easily carried out in a standard school science laboratory using common consumer products with the aim of reducing operational costs. The first activity introduces basic microbiological techniques by highlighting characteristic features of H. salinarum colonies, including their pink pigmentation and violet fluorescence under UV light. The second activity involves microscopic observation of cells stained with crystal violet, using microscope slides prepared according to a protocol adapted for halophilic microorganisms. Well-stained, flexible rod-shaped cells are observed, reflecting the absence of a rigid cell wall.Following these activities, a short questionnaire is proposed to encourage reflection on the experimental work performed. Instructors are also invited to discuss with students the role of extremophiles in the evolution of life forms. Impact Statement This article is intended for high school science teachers wishing to implement fundamental microbiological techniques in practical classroom activities. Data Summary The author confirms all supporting data, code and protocols have been provided within the article. Introduction The teaching of microbiology may be problematic if its practical aspects cannot be performed in sterile environments. Most schools do not have a dedicated microbiology laboratory, and the handling of micro-organisms is usually done in a biology or a chemistry laboratory, which lacks any controlled environment. This situation makes contamination almost unavoidable, and practical microbiology activities are very limited. Moreover, standard research microbiology laboratories are classified according to strict biosafety regulations [1, 2, 3], and the implementation of these standards entails significant constraints, which are impossible to meet in school science laboratories. If it turns out that no biological control can be carried out, but the curriculum aims to teach the basics of practical microbiology, the following two conditions must at least be met: Use non-pathogenic biological material Use non-pathogenic biological material Avoid the need to work under sterile conditions, whilst adhering to good occupational safety and hygiene practices Avoid the need to work under sterile conditions, whilst adhering to good occupational safety and hygiene practices In the search to find a solution to these issues, Professor S. DasSarma from the University of Maryland, USA, and his colleagues have pioneered the use of Halobacterium salinarum as a model organism in classrooms [4]. The advantages of working with this micro-organism are: Like all presently known archaea, it is not pathogenic. Like all presently known archaea, it is not pathogenic. Due to its extremely halophilic (salt-loving) living conditions, the handling of H. salinarum does not require sterile conditions (e.g. autoclaving media and sterilizing utensils). A clean working place and the observance of good hygienic practices are sufficient for working with this micro-organism. Due to its extremely halophilic (salt-loving) living conditions, the handling of H. salinarum does not require sterile conditions (e.g. autoclaving media and sterilizing utensils). A clean working place and the observance of good hygienic practices are sufficient for working with this micro-organism. Since its first description in 1922, the peculiar biology of H. salinarum has been extensively documented [5]. The purpose of this article is to show that microbiology can be made simple while discovering new concepts in biology. H. salinarum is an extremely halophilic micro-organism. It grows in very high saline environments in which the concentration of sodium chloride (NaCl) may go up to 5 mol⋅l−1 (290 g⋅l−1), which is close to saturation: at 20 °C, the solubility of NaCl is 358.5 g⋅l−1. H. salinarum is found in hyper-saline lakes and salterns (an installation or system of shallow ponds used to extract crystalline salt from saltwater) and sometimes in high-salt food [6] (e.g. ‘Bacalau’, salt-preserved cod). Due to their high salinity, these salterns develop a reddish or pink colour with the presence of halophilic Archaea and algae like Dunaliella. As a species that colonizes salterns, H. salinarum is known for its distinct colour and abundance at places where saline levels reach 4 mol⋅l−1 NaCl. The colour is due to the presence of halorubin, a carotenoid pigment. H. salinarum is an obligate aerobe (needs oxygen to grow). However, when oxygen is depleted, as happens in salterns where temperature and cell densities are high (around 107–108 cells·ml−1), cellular energy production switches to bacteriorhodopsin, a purple photoactive enzyme (protein) present in cell membranes. Bacteriorhodopsin is similar to vertebrate rhodopsins, the pigments that sense light (photoreceptors) in the retina [7]. Methods Activity 1: Culture and observation of H. salinarum Enquire from your local school lab supplier if H. salinarum is available. In this case, the strain was purchased from Sordalab (France) https://sordalab.com/index.php. Strains can also be obtained from Carolina Biological Supply (USA, worldwide shipping available https://www.carolina.com/archaea-halobacterium/halobacterium-sp-tube/154800.pr). It is possible to isolate strains of H. salinarum from various habitats (solar salt pans, salted foods), but this requires preliminary characterisation work that goes beyond the scope of this basic educational activity. Samples are usually delivered as colonies on a Petri dish or in a test tube. H. salinarum may be easily subcultured several times. Culture media formulations: For school labs, a formula that is easy to prepare has been created considering the use, when possible, of daily life ingredients and the growth performance on solid and liquid media. In the present case, prepare a ‘basal medium’: a medium containing water, a carbon source, a nitrogen source and various mineral salts but with a very high NaCl content. This study will focus on solid media. ‘Solid’ means that the medium, initially prepared as an aqueous solution, is gelled by addition of agar–agar, a polysaccharide of algal origin and subsequent heating and cooling. After being inoculated at the surface of the gelled medium, micro-organisms develop and are visualized by the appearance of ‘colonies’. Keeping in mind the availability of chemicals/ingredients, microbiological grade powdered yeast extract and peptone have been replaced by similar ingredients obtained from local stores. These two ingredients are easily available in supermarkets, as well as deionized water. Powdered agar is more difficult to obtain from supermarkets, but it can easily be found in drugstores or health food stores. However, this type of agar is less easy to dissolve than bacteriological grade agar. Please note that NaCl (kitchen salt) and KCl (also available in shops for low-sodium diets) should be chosen pure, without any additives. Epsom salt is available in pharmacies. Na3citrate is a food additive and is used here as a pH buffer. Ideally, but not mandatory, the pH of this medium should be adjusted to 7.5 (slightly alkaline, aligned with seawater concentration). See composition in Table 1. Table 1.Substances used for media preparationChemical/ingredientChemical formulaCommon/brand nameAvailabilityAmount g⋅l−1Molarity (mole⋅l−1)Sodium chlorideNaClTable saltSupermarkets2504.28Magnesium sulphate heptahydrateMgSO4·7H2OEpsom saltPharmacies/chemist’s/drugstores208.1⋅10−2Trisodium citrateNa3C6H5O7 na Drugstores/chemical supply companies31.2⋅10−2Potassium chlorideKCl na Supermarkets/drugstores22.6⋅10−2Yeast extract na Freeze-dried beer yeast (debittered) or Marmite® Supermarkets5 na Peptone na Bovril® Supermarkets5 na Powdered agar na Agar–agarSupermarkets20 na Water (deionized)H2OWaterSupermarketsUp to 1 L na NA, not applicable. Substances used for media preparation NA, not applicable. Materials Growth on solid media. 1-l graduated cylinder 1-l graduated cylinder 1-l beaker or similar glassware 1-l beaker or similar glassware Scale (0.1 g accuracy) Scale (0.1 g accuracy) Spoons or spatulas for weighing Spoons or spatulas for weighing 1-l Erlenmeyer flask or similar glassware 1-l Erlenmeyer flask or similar glassware Magnetic stirrer with heating and magnetic rod Magnetic stirrer with heating and magnetic rod A few plastic Petri dishes (Ø 88 mm is fine) A few plastic Petri dishes (Ø 88 mm is fine) Cotton buds Cotton buds A H. salinarum strain A H. salinarum strain A binocular magnifier A binocular magnifier A handheld UV (black light) lamp A handheld UV (black light) lamp Procedure (see Fig. 1.) Illustrated H. salinarum culture protocol 1. Completely dissolve the mineral salts in about 750 ml of hot deionized water in a glass container and pour the solution into the graduated cylinder. Allow to cool down to room temperature. 2. Add yeast extract and peptone to the cylinder and adjust to 1 l with deionized water; mix well. Agar won’t dissolve at room temperature; it is recommended to add the agar when the medium is brought to a boil in the Erlenmeyer flask. Mix well while boiling to avoid clogging. Because of its very high salinity, it is not necessary to autoclave this medium. Let the medium cool to ~40 °C and pour about 15–20 ml into the Petri dishes. Put the lids back on and allow the medium to gel at room temperature. If no experiment is performed afterwards, the Petri dishes may be stored for several days in a refrigerator. It is preferred to store them upside down to control condensation. Let the medium cool to ~40 °C and pour about 15–20 ml into the Petri dishes. Put the lids back on and allow the medium to gel at room temperature. If no experiment is performed afterwards, the Petri dishes may be stored for several days in a refrigerator. It is preferred to store them upside down to control condensation. Collect H. salinarum samples from the original Petri dish by gently rubbing the pink coloured colonies with a cotton bud (or an inoculation loop if available). Collect H. salinarum samples from the original Petri dish by gently rubbing the pink coloured colonies with a cotton bud (or an inoculation loop if available). Inoculate the surface of the freshly prepared Petri dishes, put the lid back on and let them incubate at room temperature (~25 °C) for at least 1 week. Note: The ideal growth temperature is 37–40 °C. In these conditions, colonies grow much faster. Inoculate the surface of the freshly prepared Petri dishes, put the lid back on and let them incubate at room temperature (~25 °C) for at least 1 week. Note: The ideal growth temperature is 37–40 °C. In these conditions, colonies grow much faster. Once the colonies are well established, they can be observed with a binocular magnifier directly on the Petri dish. Once the colonies are well established, they can be observed with a binocular magnifier directly on the Petri dish. Shine a UV light (395 nm) on the colonies to produce a purple fluorescence. Shine a UV light (395 nm) on the colonies to produce a purple fluorescence. Activity 2: H. salinarum under the microscope The best way to visualize individual cells is – of course – under the microscope. Here is a simple protocol describing this activity. Materials NaCl 20% aqueous solution NaCl 20% aqueous solution Acetic acid 2% aqueous solution or alcohol vinegar (6°/8° acidity) diluted three-/fourfold in deionized water Acetic acid 2% aqueous solution or alcohol vinegar (6°/8° acidity) diluted three-/fourfold in deionized water Crystal violet 0.25% aqueous solution for staining. Crystal violet staining constitutes part of the Gram staining protocol, which is a standard procedure in microbiology. It is readily available from chemical products companies. Crystal violet 0.25% aqueous solution for staining. Crystal violet staining constitutes part of the Gram staining protocol, which is a standard procedure in microbiology. It is readily available from chemical products companies. Distilled water Distilled water Immersion oil (for microscopy) Immersion oil (for microscopy) Plastic pipette Plastic pipette Microscope Microscope Procedure (see Fig. 2.) Preparation of microscope slides for H. salinarum observation Pour a few millilitres of the NaCl solution into a Petri dish containing well-developed colonies. Pour a few millilitres of the NaCl solution into a Petri dish containing well-developed colonies. With a cotton bud, remove the colonies by gently rubbing to obtain a cell suspension. This suspension should not be too thick. A slightly pink-coloured liquid is sufficient. With a cotton bud, remove the colonies by gently rubbing to obtain a cell suspension. This suspension should not be too thick. A slightly pink-coloured liquid is sufficient. Drop a small drop of this microbial suspension on a microscope slide. Drop a small drop of this microbial suspension on a microscope slide. Let this drop dry out; salt crystals will precipitate. Let this drop dry out; salt crystals will precipitate. Dip the slide in the acetic acid solution for 5 min; this step fixes the cells and dissolves the salt. Dip the slide in the acetic acid solution for 5 min; this step fixes the cells and dissolves the salt. Remove the slide from the acid bath and let it air dry. Remove the slide from the acid bath and let it air dry. Put a drop of crystal violet on the preparation and let it rest for 3 min. Put a drop of crystal violet on the preparation and let it rest for 3 min. Remove the stain by thoroughly washing with distilled water. Refer to Section 13 (Disposal Considerations) of crystal violet’s Safety Data Sheet (SDS) before discarding the washing waste. Remove the stain by thoroughly washing with distilled water. Refer to Section 13 (Disposal Considerations) of crystal violet’s Safety Data Sheet (SDS) before discarding the washing waste. Let the slide dry. Let the slide dry. Observe under the microscope without a cover slip at a 1,000× magnification with immersion oil. Observe under the microscope without a cover slip at a 1,000× magnification with immersion oil. Warning! It is recommended to collect the crystal violet washing liquid in a suitable container rather than pouring it directly down the sink. Results and observations Activity 1 The appearance of colonies becomes detectable after 2–3 days of incubation. Well defined pink coloured microbial structures appear after about 1 week. Under UV light, the colonies brightly fluoresce in purple (Fig. 3). This phenomenon is due to the presence of bacteriorhodopsin in the cell membranes of H. salinarum. Appearance of H. salinarum colonies under visible and UV light When the incubation time increases, salt crystals start precipitating inside the agar where microbial colonies may become embedded. If Petri dishes are left unattended for a long time, the whole culture dries out but, surprisingly, H. salinarum cells stay alive and can be subcultured. Fig. 4 shows a cluster of cells embedded in crystallized salt both under visible and UV light. Embedded colonies in salt crystals Activity 2 Cells are clearly visible and show a deep violet colour (Fig. 5). Cells are rod-shaped and appear flexible due to the absence of a cell wall (magnification: 1,000×). Crystal violet staining of H. salinarium cells (1,000×). Discussion In all respects, H. salinarum is unique and raises great interest. In order to provide informed responses to the various questions outlined below, both instructors and students are strongly encouraged to consult the seminal article by Das Sarma et al. [4]. In addition, the website of this author’s laboratory offers an extensive collection of data and resources related to Haloarchaea [8]. With regard to applications, some companies have specialized in the production of by-products derived from the large-scale cultivation of H. salinarum [9]. More specifically, the bacteriorhodopsin of H. salinarum is employed in bioelectronics, a highly advanced and cutting-edge field of research [10]. The following questions may initiate further research with students. Activity 1: Maybe this was your first contact with microbiology. What did you learn? Maybe this was your first contact with microbiology. What did you learn? Microbes have lots of applications (food technology, medicine, ecology etc.). Does H. salinarum have specific applications? Microbes have lots of applications (food technology, medicine, ecology etc.). Does H. salinarum have specific applications? Why are halophilic archaea considered one of the first lifeforms on Earth? Why are halophilic archaea considered one of the first lifeforms on Earth? What is fluorescence? Why do H. salinarum cells fluoresce? What is fluorescence? Why do H. salinarum cells fluoresce? Activity 2: Why do you have to suspend H. salinarum cells in a 20% salt solution? Why do you have to suspend H. salinarum cells in a 20% salt solution? Why is it necessary to stain the cells? Why is it necessary to stain the cells? Have you ever heard about the Gram stain? What is the difference with the present protocol? Have you ever heard about the Gram stain? What is the difference with the present protocol? What is the procedure to reach a magnification of 1,000×? What is the procedure to reach a magnification of 1,000×? Who invented the first microscope? Who invented the first microscope? Conclusion These few simple experiments, which are very similar to those carried out in a ‘real’ microbiology laboratory, show that it is possible, apart from working under sterile conditions, to acquire basic skills in handling micro-organisms. Moreover, using H. salinarium, an archaeon, arouses curiosity because it is an extremophilic micro-organism capable of living in very specific biotopes: halophilic bacteria have even been discovered in salt crystals dating back to the Permian period, 250 million years ago [11, 12]! Another point of interest: halophilic microorganisms could potentially survive on other planets [13]. The present work has not been implemented under classroom conditions. As part of the future development of pedagogical activities, such implementation is planned, together with the collection of feedback from participants in order to optimize the teaching of microbiology.