ImPaqT, a Golden Gate-based immunological toolkit for zebrafish transgenesis Authors: Saskia Hurst, Christiane Dimmler, Mark R Cronan, Didier YR Stainier, Saskia Hurst, Christiane Dimmler, Mark R Cronan Published: 2026 ABSTRACT Transgenic animals play an essential role in many aspects of zebrafish research. Here, we have developed ImPaqT (Immunological Toolkit for PaqCI-based Golden Gate Assembly of Tol2 Transgenes), a new Tol2-based transgenesis system that utilizes Golden Gate assembly to facilitate the production of transgenic zebrafish lines. This system allows for rapid assembly of multiple fragments into a single transgene, facile swapping of individual sequences to generate new transgenes, and an easy cloning workflow to incorporate new genetic elements into the existing kit. Within this framework, we have generated reagents to enable gene expression within different cell types, an array of best-in-class fluorescent proteins to visualize cell populations and transgenes, as well as tools to simplify genetic manipulation, purification, and ablation of targeted cells. Unlike many recombination-based systems, our approach is also expandable, allowing the incorporation of complex designs such as multifragment promoters within the established modular framework of ImPaqT. We have demonstrated the function of our system by generating various transgenic immune reporter lines. While we focused on the immune system as an emerging area of study within zebrafish research, ImPaqT can be broadly adapted to the construction of almost any zebrafish transgene, offering new tools for the zebrafish community. Introduction The zebrafish (Danio rerio) has emerged as a powerful model organism and is increasingly used in various research fields and disciplines. Zebrafish share 70% of their genome and more than 80% of disease genes with humans (Howe et al., 2013). This has led to the development of many distinct zebrafish disease models (Santoriello and Zon, 2012), including models of hematopoietic and neurodegenerative diseases, cardiovascular diseases (Bowley et al., 2022) such as atherosclerosis (Tang et al., 2021), cancer (Liu and Leach, 2011; Russo et al., 2022), and tuberculosis (Bouz and Al Hasawi, 2018; Varela and Meijer, 2022), among others. Transgenic animals continue to play a key role for many experimental strategies, including study of gene function, genetic screens, and development of disease models. Transgenic zebrafish lines have been widely generated by applying the Tol2 transposon system with a transgenesis rate of 50% (Kawakami et al., 2004). In this system, a transposon-donor plasmid containing a DNA sequence of interest flanked by Tol2 sites and synthetic mRNA encoding the Tol2 transposase are introduced into the single cell of fertilized eggs by microinjection. Upon translation, the transposase protein integrates the Tol2 flanked gene fragment randomly into the genome through a cut-and-paste mechanism without causing rearrangement or modifications at the target site (Kawakami and Shima, 1999; Kawakami et al., 2000; Kawakami et al., 2004; Kawakami, 2007). A number of approaches have previously been used to generate Tol2 transgenesis constructs. Traditionally, multi-step restriction enzyme and ligase-based subcloning was used. However, this has given way to many advanced cloning approaches, including Gateway cloning (Hartley et al., 2000; Kwan et al., 2007; Katzen, 2007), Gibson Assembly (Gibson et al., 2009), In-Fusion cloning (Zhu et al., 2007; Sleight et al., 2010), and Golden Gate cloning, which have been used to speed up and simplify the procedure of transgene assembly. Each of these approaches has different advantages and disadvantages. Gateway cloning allows for the establishment and reuse of a library of fragments (e.g. promoters, genes, and fluorescent proteins) but requires the use of lambda phage-derived att sequences to facilitate insertion of the desired sequences. These att sequences result in the addition of ~20–25 bp of additional sequence in between each element, and expansion of the number of fragments to be assembled can require recloning of the sequence with new att ends (Katzen, 2007; Engler et al., 2008; Sone et al., 2008). By contrast, Gibson and In-Fusion cloning allow for joining of short (15–20 bp) regions of homology, enabling the seamless cloning of many transgenes. However, the requirement for homology for seamless cloning generally means that individual components have to be adapted to upstream and downstream elements to generate new transgenes and have an upper limit of approximately five to six fragments with currently available kits. Golden Gate cloning utilizes type IIS restriction enzymes to cleave and join multiple fragments in a one-pot reaction (Padgett and Sorge, 1996; Engler et al., 2008). It balances the trade-offs of the previous cloning systems, requiring inclusion of only a short 4-base pair sequence, while enabling researchers to generate a library of vectors that can be combinatorially assembled to generate distinct transgenes. Large numbers of DNA fragments can also be assembled by Golden Gate with reports of assembly of up to 52 fragments in a single reaction (Pryor et al., 2022). Despite the advantages of Golden Gate cloning, this approach has not been widely applied in zebrafish transgene assembly. Only a few examples of this approach have been described for Tol2 transgenesis, including the recently described GoldenFish toolkit, which uses Golden Gate cloning to gain more flexibility in transgene design (Jiang et al., 2023), and the Golden Gateway tool (Kirchmaier et al., 2013), which combines the well-established cloning tools Gateway and Golden Gate cloning to simplify the creation of new components for Gateway assembly of transgenes. Here, we have sought to apply Golden Gate cloning approaches to create a toolkit for zebrafish transgenesis. We have developed ImPaqT, a new Immunological Toolkit for PaqCI-based Golden Gate Assembly of Tol2 Transgenes, to facilitate the production of transgenic animals. Studies of immune function have been of growing interest in the zebrafish community due to the close genetic similarity of the immune systems of humans and zebrafish (Howe et al., 2013), but there are few compiled resources for these cell types. ImPaqT provides a collection of commonly used immunological promoters targeting distinct lineages of vertebrate immunity, genetic tools, and fluorophores supporting flexible generation of transgenes for immunological research. This toolkit utilizes Golden Gate cloning due to the advantages of this technique and incorporates a newly described type IIS restriction enzyme, PaqCI, with a 7-base recognition sequence to reduce the frequency of off-target cutting (from 1 in 4096 bases (46) for a 6-base cutter to 1 in 16,384 bases (47), assuming random cutting). We designed the kit to have consistent overhang sequences for each position in the backbone (e.g. 5′, middle, and 3′ element) in order to make the toolkit modular and simplify the construction of additional transgenes. As proof of concept, we show that this toolkit can facilitate the production of expression constructs, and we demonstrate the generation of transgenic animals using Tol2 transgenesis with these constructs. ImPaqT is modular, enabling simple swapping of gene sequences, easily expandable, allowing the introduction of multiple new genetic elements if needed, and relies only on the use of short (4 bp) overlaps that can also be designed to be scarless if desired. To establish an immunological toolkit that will be broadly useful to zebrafish researchers, we have generated a variety of immunological and non-immunological promoters, including mfap4 and mpeg1.1 (expressed in macrophages), irg1 (macrophages, induced by infection), lyz (neutrophils), lck (T cells), ubb (ubiquitous), and hsp70 (heat shock inducible), tools for genetic recombination (icre), cell killing (kid, nitroreductase), and cell isolation tools (LNGFR), and an array of fluorescence proteins including mTurquoise2, tdStayGold, mCitrine, mNeonGreen, dLanYFP, and tdTomato that can be used to rapidly develop new transgenes and new transgenic lines. Results PaqCI-based Golden Gate cloning enables the construction of Tol2 expression vectors We sought to create a toolkit for immune transgene construction for the zebrafish community. Ultimately, we decided to design this toolkit to use Golden Gate cloning, given the short regions of homology that this approach required, the ability to structure this toolkit in a modular fashion, and the expandability of the Golden Gate cloning approach, enabling incorporation of additional genetic elements as needed. Golden Gate assembly uses type IIS restriction enzymes to generate a set of unique overhangs that are used to join fragments in a desired order. To create a system for modular cloning of transgenes, we chose consistent 4-base overhang sequences for each of the three elements such that DNA fragments amplified with these overhangs can be cloned in the same position in the final construct, allowing these elements to be used combinatorially. The individual overhang sequences were chosen using NEBridge Ligase Fidelity Viewer (https://ligasefidelity.neb.com/viewset/run.cgi), which enables the selection of efficient joining ends with minimal off-target ligation based on high throughput, combinatorial tests of all 4-base overhangs (Pryor et al., 2020; Potapov et al., 2018). Using this tool, we selected ends predicted to have 1% or less off-target ligation with the other ends used in the toolkit. As zebrafish transgenes generally consist of a cell-type-specific promoter, a gene of interest, and a fluorescent marker, we structured our toolkit to have three elements that would ultimately be joined within a backbone vector possessing Tol2 repeats for transgenesis. These elements were named based on their location within the final construct – 5′ element (5E) for the first position, a middle element (ME), and a 3′ element (3E) for the final position within the backbone. To generate the overhangs required to join individual components for Golden Gate assembly, we chose the 7-base cutter PaqCI to limit off-target cutting of inserts used in assembly. Searches of the zebrafish genome revealed that PaqCI cuts once every ~17 kb on average (~82,600 sites in the GRCz11 zebrafish genome assembly), while the 6-base cutters BsaI and BsmBI, commonly used for Golden Gate, cut every ~9 kb (~151,800 sites) or ~13 kb (~107,200 sites). Genes and regions of interest were generated by PCR amplification using primers containing the 7-base PaqCI recognition sequence along with a spacer consisting of any four nucleotides that is excised from the final construct, and a 4-base overhang sequence defined by the location of the sequence of interest in the final construct (Figure 1—figure supplement 1). These PCR products were cloned into vectors and sequence verified to generate a stable library of constructs for transgene assembly. Cleavage with PaqCI leads to the creation of specific 4-base overhangs for each position at their 5′ and 3′ end enabling proper assembly and single-step ligation into a backbone vector for transgene generation (Figure 1, Figure 1—figure supplement 2). These backbone vectors possess inverted Tol2 repeats for transgenesis surrounding a PaqCI-flanked LacZ gene for blue-white screening to identify backbone constructs containing transgene components. A simplified schematic for the assembly using one insert is illustrated in Figure 1. As we demonstrated below, we have found that this approach allows for efficient, combinatorial transgene generation. Basic principles of Golden Gate cloning for Tol2 transgenesis. Schematic of a Golden Gate cloning reaction using one insert. The insertion construct and backbone vector are assembled in a single-tube reaction using PaqCI and ligase. PaqCI is a type IIS restriction enzyme. Its recognition site and cleavage are indicated. The font color corresponds to the color of the respective feature indicated in the cartoon. The backbone vector consists of Tol2 sites, PaqCI recognition sites (PaqCI) along with 4-base spacer sequences (N4) and two overhangs (O). The insertion construct includes the gene of interest (GOI) flanked by PaqCI, N4, and the same two overhangs. Assembly involves digestion of backbone and insertion constructs by PaqCI producing matching overhangs and ligation through the DNA ligase forming the final assembly product. Figure 1—figure supplement 1.Overhangs and construction of insertion constructs.(A) Schematic of primer design for generating a 5E insertion containing overhang sequences O1 (TTCC, orange) and O2 (TTTG, green), 4-base spacer sequence (N4, CCTT/AAGG, blue), and PaqCI recognition site (CACCTGC, pink) with example primer sequence for the 5E ubiquitin B promoter insertion. (B) Schematic of the amplification of genes for generation of 5E, ME, and 3E with primers containing the PaqCI recognition site, N4, and a specific overhang sequence. (C) Schematic of digested insertion elements with specific overhangs. Overhangs and construction of insertion constructs. (A) Schematic of primer design for generating a 5E insertion containing overhang sequences O1 (TTCC, orange) and O2 (TTTG, green), 4-base spacer sequence (N4, CCTT/AAGG, blue), and PaqCI recognition site (CACCTGC, pink) with example primer sequence for the 5E ubiquitin B promoter insertion. (B) Schematic of the amplification of genes for generation of 5E, ME, and 3E with primers containing the PaqCI recognition site, N4, and a specific overhang sequence. (C) Schematic of digested insertion elements with specific overhangs. Figure 1—figure supplement 2.Sequence of the backbone vector.(A) Schematic of the backbone vector used for all Golden Gate assemblies conducted in this study. The backbone vector consists of an ampicillin resistance (AmpR) and E. coli origin (CoIE), Tol2 sites, PaqCI recognition sites (PaqCI) along with 4-base spacer sequences (N4) and two overhangs (O1 and O4). (B) Complete DNA sequence of the backbone vector. Different parts of the vector are indicated by color corresponding to the schematic in A. Sequence of the backbone vector. (A) Schematic of the backbone vector used for all Golden Gate assemblies conducted in this study. The backbone vector consists of an ampicillin resistance (AmpR) and E. coli origin (CoIE), Tol2 sites, PaqCI recognition sites (PaqCI) along with 4-base spacer sequences (N4) and two overhangs (O1 and O4). (B) Complete DNA sequence of the backbone vector. Different parts of the vector are indicated by color corresponding to the schematic in A. Figure 1—figure supplement 3.Domestication of endogenous PaqCI sites.(A) Schematic of the 5E ubb promoter construct as an example of an insertion element containing an endogenous PaqCI site. The construct contains PaqCI sites (pink), spacer sequence (N4, blue), and overhang sequences O1 (orange) and O2 (green). Primers were designed to introduce a single base mutation (highlighted in bold and underlined) in the endogenous PaqCI recognition site (red). (B) PCR amplified ubb promoter with mutated endogenous PaqCI site and homology arms for In-Fusion cloning. (C) In-Fusion reaction of the PCR product led to the final 5E ubb promoter construct with the mutated endogenous PaqCI site. Domestication of endogenous PaqCI sites. (A) Schematic of the 5E ubb promoter construct as an example of an insertion element containing an endogenous PaqCI site. The construct contains PaqCI sites (pink), spacer sequence (N4, blue), and overhang sequences O1 (orange) and O2 (green). Primers were designed to introduce a single base mutation (highlighted in bold and underlined) in the endogenous PaqCI recognition site (red). (B) PCR amplified ubb promoter with mutated endogenous PaqCI site and homology arms for In-Fusion cloning. (C) In-Fusion reaction of the PCR product led to the final 5E ubb promoter construct with the mutated endogenous PaqCI site. ImPaqT facilitates the flexibility of transgene design and the generation of transgenic zebrafish Having established this Golden Gate cloning-based technique for the assembly of Tol2 transposon vectors, we sought to create an array of constructs that would be beneficial to the immunology community to generate transgenic animals. To these ends, we have generated constructs for expression in commonly studied zebrafish immune populations, including T cells (lck) (Langenau et al., 2004), neutrophils (lyz) (Hall et al., 2007), and macrophages (mfap4, mpeg1.1, and the infection-inducible irg1) (Walton et al., 2015; Ellett et al., 2011; Hall et al., 2013). To enable lineage tracing approaches for labeling of hematopoietic-derived cells, we also included the hematopoietic stem cell-specific promoter runx1 +23 (Tamplin et al., 2015) as well as tools for broader expression including the ubiquitous promoter ubiquitin B (ubb) (Mosimann et al., 2011), and the temperature-inducible heat shock protein 70-like promoter (hsp70) (Shoji et al., 1998; Halloran et al., 2000; Kwan et al., 2007). We have also integrated a number of tools to allow for manipulation of these immune populations, including tools for genetic manipulation (icre, Shimshek et al., 2002), for rapid purification of cell populations (truncated human LNGFR, Wattrus and Zon, 2020), expression of CRISPR gRNAs, and other small RNAs (zebrafish U6 promoter, Zhou et al., 2018), and cell-specific ablation (nitroreductase, Curado et al., 2007; Curado et al., 2008 and kid, Labbaf et al., 2022). To visualize labeled cell populations and genes, we provide a diverse array of best-in-class fluorescent proteins in a range of colors to facilitate simultaneous imaging of distinct cell types. These include tdStayGold (Hirano et al., 2022), mTurquoise2 (Goedhart et al., 2012), tdTomato (Shaner et al., 2004), mCitrine (Zacharias et al., 2002), mNeonGreen (Shaner et al., 2013), and dLanYFP (Shaner et al., 2013). A summary of all available constructs is shown in Table 1. ImPaqT is also designed to be easily expandable through simple cloning approaches. Table 1.Library of insertion constructs.5′ element (5E), middle element (ME), 3′ element (3E).Insertion elementsPositionFunctionReference irg1 5EInfection-inducible macrophage-specific promoter Hall et al., 2013 mfap4 5EMacrophage-specific promoter Walton et al., 2015 mpeg1.1 5EMacrophage-specific promoter Ellett et al., 2011 lyz 5ENeutrophil-specific promoter Hall et al., 2007 ubiquitin B (ubb)5EPromoter for ubiquitous expression Mosimann et al., 2011 ubb:loxP GFP loxP 5EPromoter for ubiquitous expression of floxed GFP for use in combination with Cre Mosimann et al., 2011 hsp70 5Eheat shock protein 70-like promoter for inducible gene expressionShoji et al., 1998; Halloran et al., 2000; Kwan et al., 2007 lck 5ET cell-specific promoter Langenau et al., 2004 runx1 +23 5EPromoter for expression in hematopoietic stem cells Tamplin et al., 2015 icre MECre recombinase for inducible recombination of DNA between loxP sites Shimshek et al., 2002 (p2A) dLanYFP3EYellow fluorescent protein Shaner et al., 2013 mNeonGreen ME, 3EGreen/yellow fluorescent protein Shaner et al., 2013 LNGFR MELow affinity nerve growth factor receptor for rapid cell enrichment Wattrus and Zon, 2020 nitroreductase MEInducible ablation of specific cell lineagesCurado et al., 2007; Curado et al., 2008 kid MEAblation of specific cell lineagesLabbaf et al., 2022; de la Cueva-Méndez et al., 2003(p2A) tdTomatoME, 3ERed fluorescent protein Shaner et al., 2004 tdTomato CAAX MERed fluorescent protein with membrane localization protein Walton et al., 2015 (p2A) mTurquoise2ME, 3ECyan fluorescent protein Goedhart et al., 2012 mCitrine MEYellow fluorescent protein Zacharias et al., 2002 tdStayGold MEGreen fluorescent protein Hirano et al., 2022 ubb:polyA 3EUbiquitous expression of a SV40 poly A Walton et al., 2015 polyA-gRNA (Control):U6 3EgRNA targeting control site under control of U6 promoter Zhou et al., 2018 polyA-gRNA (GFP):U6 3EgRNA targeting GFP under control of U6 promoter Zhou et al., 2018 Library of insertion constructs. 5′ element (5E), middle element (ME), 3′ element (3E). Generation of new transgenic zebrafish lines using ImPaqT To test our PaqCI-based Golden Gate assembly toolkit as well as generate new immunological zebrafish lines for the community, we used ImPaqT to assemble a number of new transgenic lines. Using the neutrophil-specific promoter lyz, we generated a Tg(lyz:mTurquoise2)ber2 construct through Golden Gate assembly of 5E lyz, ME mTurquoise2, and 3E ubb:polyA to create the lyz:mTurquoise2 transgene construct (Figure 2A, B). The construct was coinjected with Tol2 transposase mRNA into the single cell of fertilized eggs, and at 2 days post injection (dpi) we observed a strong blue fluorescence signal within likely neutrophil populations in the CHT (Figure 2C). Positive animals were raised to adulthood, and screening of F1 progeny of these animals revealed robust expression of mTurquoise2 within putative neutrophil populations throughout the animal (Figure 2D). Crossing to the already established neutrophil reporter Tg(lyz:EGFP)nz117 (Hall et al., 2007) zebrafish confirmed specific expression of our transgene within neutrophils (Figure 2—figure supplement 1). Generation of Tg(lyz:mTurquoise2) zebrafish. (A) Schematic of the Golden Gate assembly of Tg(lyz:mTurquoise2). The backbone vector contains overhang sequences O1 (TTCC) and O4 (AGGA). lyz is a neutrophil-specific promoter containing overhang sequences O1 and O2 (CAAA). mTurquoise2 encodes a bright cyan fluorescent protein with overhangs O2 and O3 (GCTA). ubb:polyA is assembled at the final position within the backbone with O3 and O4. (B) Schematic of the final assembly product of Tg(lyz:mTurquoise2). Images of a Tg(lyz:mTurquoise2) F0 (C) and F1 (D) larva showing neutrophil-specific expression of mTurquoise2 fluorescent protein in cyan at 2 days post fertilization. Figure 2—figure supplement 1.Verification of the Tg(lyz:mTurquoise2) zebrafish line.Tg(lyz:EGFP) and Tg(lyz:mTurquoise2) zebrafish were crossed. Images of a double-positive larva are shown in A and images of a Tg(lyz:mTurquoise2) single-positive larva in B. GFP is presented in magenta, CFP signal in cyan, and merge in white. Verification of the Tg(lyz:mTurquoise2) zebrafish line. Tg(lyz:EGFP) and Tg(lyz:mTurquoise2) zebrafish were crossed. Images of a double-positive larva are shown in A and images of a Tg(lyz:mTurquoise2) single-positive larva in B. GFP is presented in magenta, CFP signal in cyan, and merge in white. Similarly, we used the ImPaqT toolkit to generate a new macrophage-specific transgene using the infection-inducible macrophage-specific promoter irg1 and the recently described bright green fluorescent protein tdStayGold (Hirano et al., 2022). To generate the Tg(irg1:tdStayGold)ber3 construct, the 5E irg1, ME tdStayGold, and 3E ubb:polyA elements were combined into the backbone vector (Figure 3A, B). We injected zebrafish with this construct and as irg1 is an inflammation responsive promoter that is only weakly expressed in the absence of immune stimulation, we injected larvae with LPS before screening. After LPS injection, we were able to identify a number of F0 founders with strong green fluorescence within subpopulations of their macrophages (Figure 3C). These positive F0 larvae were raised to adulthood and screening of F1 progeny revealed expression of tdStayGold throughout macrophage populations upon stimulation with LPS (Figure 3D). Generation of Tg(irg1:tdStayGold) zebrafish. (A) Schematic of the Golden Gate assembly of Tg(irg1:tdStayGold). The backbone vector contains overhang sequences O1 (TTCC) and O4 (AGGA). irg1 is a macrophage-specific promoter containing overhang sequences O1 and O2 (CAAA). tdStayGold encodes a bright green fluorescent protein with overhangs O2 and O3 (GCTA). ubb:polyA is assembled at the final position within the backbone with O3 and O4. (B) Illustration of the final assembly product of Tg(irg1:tdStayGold). Images of a Tg(irg1:tdStayGold) F0 (C) and F1 (D) larva showing macrophage-specific tdStayGold expression. We also aimed to test the utility of the tools that we have designed within our kit. To these ends, we created an infection-inducible, macrophage-specific icre transgene construct, Tg(irg1:icre-p2A mTurquoise2). This construct was generated by combining 5E irg1, ME icre, and 3E p2A mTurquoise2 (Figure 4A, B). Animals injected with this transgene showed macrophage-specific mTurquoise2 signal after injection with LPS (Figure 4C). To further confirm that this construct was able to drive rearrangement of floxed reporters, we injected Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry)cz1701 (Mosimann et al., 2011) zebrafish with this construct. These animals were injected with LPS and imaged for 48 hr to visualize rearrangement of the floxed construct. LPS treatment drove the induction of icre and the co-translationally cleaved p2a mTurquoise2 transgene within macrophages starting ca. 4 hr post LPS injection. While the induction of the irg1:icre-p2a mTurquoise2 transgene was transitory, this short-term induction of Cre could induce permanent rearrangement of the loxP-EGFP-loxP-mCherry construct as seen by induction of red fluorescent mCherry within macrophage populations (Figure 4D, Figure 4—figure supplement 1, Figure 4—video 1). Control animals without the icre-construct neither showed mTurquoise2 nor mCherry signal in macrophages (Figure 4—figure supplement 1, Figure 4—video 2). This experiment showed not only the functionality of the individual insertion constructs but also the range of assembly constructs that can be generated with them. Generation of Tg(irg1:icre-p2A mTurquoise2) zebrafish for lineage tracing of individual macrophages. (A) Schematic of the Golden Gate assembly of Tg(irg1:icre-p2A mTurquoise2). The backbone vector contains overhang sequences O1 (TTCC) and O4 (AGGA). The macrophage promoter irg1 contains overhang sequences O1 and O2 (CAAA). icre contains overhangs O2 and O3 (GCTA) for the middle position. p2A mTurquoise2 is assembled at the final position within the backbone with O3 and O4. (B) Illustration of the final assembly product of Tg(irg1:icre-p2A mTurquoise2). (C) Image of a Tg(irg1:icre-p2A mTurquoise2) F0 larva showing macrophage-specific mTurquoise2 signal after stimulation with LPS. (D) Images of a Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) larva that was introduced to the Tg(irg1:icre-p2A mTurquoise2) construct at single-cell stage and was treated with PTU and LPS. The images show a macrophage-specific mTurquoise2 signal (e.g. 5 hr post LPS injection) and a macrophage-specific mCherry signal (e.g. 33 hr post LPS injection). Figure 4—figure supplement 1.A floxed transgene does not reorganize in the absence of Cre.As a control for testing of Tg(irg1:icre-p2A mTurquoise2) in Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) animals in Figure 4 and Figure 4—video 1 and Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control larvae were injected with LPS 2 dpf and screened. Images are shown in CFP, mCherry, and merge 5 hr (left) and 33 hr(right) post LPS injection. A floxed transgene does not reorganize in the absence of Cre. As a control for testing of Tg(irg1:icre-p2A mTurquoise2) in Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) animals in Figure 4 and Figure 4—video 1 and Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control larvae were injected with LPS 2 dpf and screened. Images are shown in CFP, mCherry, and merge 5 hr (left) and 33 hr(right) post LPS injection. Figure 4—video 1.Time-lapse imaging of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) injected with Tg(irg1:icre-p2A mTurquoise2) zebrafish for lineage tracing of individual macrophages.The Tg(irg1:icre-p2A mTurquoise2) construct was introduced into fertilized eggs from Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) zebrafish at their single-cell stage. Larvae were treated with PTU and LPS, and time-lapse imaging was performed for 48 hr. The movie shows a macrophage-specific CFP and mCherry signal. Scale bar is 100 µm. Time-lapse imaging of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) injected with Tg(irg1:icre-p2A mTurquoise2) zebrafish for lineage tracing of individual macrophages. The Tg(irg1:icre-p2A mTurquoise2) construct was introduced into fertilized eggs from Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) zebrafish at their single-cell stage. Larvae were treated with PTU and LPS, and time-lapse imaging was performed for 48 hr. The movie shows a macrophage-specific CFP and mCherry signal. Scale bar is 100 µm. Figure 4—video 2.Time-lapse imaging of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control zebrafish.As a control to the Cre-induced rearrangement of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) by Tg(irg1:icre-p2A mTurquoise2) in Figure 4 and Figure 4—video 1 and Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control larvae were treated with PTU and LPS, and time-lapse imaging was performed for 48 hr with no macrophage-specific CFP and mCherry signal observed in the absence of the iCre construct. Scale bar is 100 µm. Time-lapse imaging of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control zebrafish. As a control to the Cre-induced rearrangement of Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) by Tg(irg1:icre-p2A mTurquoise2) in Figure 4 and Figure 4—video 1 and Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) control larvae were treated with PTU and LPS, and time-lapse imaging was performed for 48 hr with no macrophage-specific CFP and mCherry signal observed in the absence of the iCre construct. Scale bar is 100 µm. ImPaqT is expandable through the introduction of new overhang sequences A limitation of many existing systems for transgenesis is that these systems have a fixed number of elements that can be combined to generate transgenes. Golden Gate methods, however, are expandable through the addition of new overhangs and have been used to join 10–24 or even more than 50 fragments of DNA in a single reaction (Kucera, 2021; Pryor et al., 2022). The ability to expand this kit to include larger numbers of constructs would simplify the generation of complex transgenes, including multifragment promoters, loxP sites, localization tags (e.g NLS or prenylation signal), or multigene constructs, for example. To provide proof of concept for the expandability of ImPaqT, vectors were designed to enable the construction of a ubb promoter-driven construct from three similarly sized ubb promoter fragments, ubb1, ubb2, and ubb3. These fragments were constructed such that the first fragment (ubb1) and the last fragment (ubb3) use the same O1 and O2 overhangs used by 5E constructs so that the array of promoter fragments can be cloned into the existing position of 5E elements and used alongside already existing ME and 3E constructs (Figure 5A, B). New internal overhangs were designed for the ubb1, ubb2, and ubb3 fragments to combine these distinct fragments (Figure 5A–D). Individual ubb fragments were used for Golden Gate assembly in combination with ME mTurquoise2 and 3E ubb:polyA (Figure 5C), which led to the expected transgenesis construct Tg(ubb:mTurquoise2)ber4 (Figure 5D) that was injected into embryos at single-cell stage. Screening of injected animals confirmed that transgenic embryos established with this construct had the expected expression pattern (Figure 5E). We also found robust expression in the F1 progeny (Figure 5F) after raising positive F0 animals, confirming that injected animals are viable and able to pass on the transgene to the next generation. Together, these findings demonstrated proof of concept for the expansion of this transgene assembly system, enabling users to add fragments as needed through the addition of novel unique 4-base overhangs while maintaining compatibility with existing ImPaqT constructs. ImPaqT allows for expandability of individual positions while retaining compatibility with already established transposon components. (A) Schematic of the 5E ubiquitin B (ubb) promoter construct containing PaqCI recognition sites (PaqCI) along with 4-base spacer sequences (N4) and two overhangs (O1: TTCC, O2: CAAA) for positioning at the 5′ end of the assembly construct. Primers were designed to break up ubb into three fragments with new overhang sequences. (B) Schematic of PCR amplified ubb fragments ubb1–3 with PaqCI, N4 and O1 and O1A (TAGC), O1A and O1B (TTGA), and O1B and O2, respectively. (C) Schematic of the Golden Gate assembly of 5E ubb1–3, ME mTurquoise2, and 3E ubb:polyA into the backbone vector. (D) Illustration of the final assembly product of Tg(ubb1-3:mTurquoise2). Images of a Tg(ubb:mTurquoise2) F0 (E) and F1 (F) larva showing ubiquitous mTurquoise2 signal. ImPaqT allows for rapid transgene generation through cloning from PCR Within the framework of ImPaqT, insertion elements are PCR amplified for the addition of PaqCI sites, spacer sequences, and overhangs that are required for the Golden Gate assembly reaction, and subsequently subcloned into vectors prior to the assembly of the transgene. This subcloning step not only ensures an error-free and stable storage of these constructs but also allows for the generation of a stable library of elements that can be easily combined, reused, and shared within the community. However, the additional cloning step is also more time-consuming and, in rare cases where the construct is toxic to bacteria, can result in alteration of parts of the construct. In individual experimental strategies, e.g. for testing new elements or for the single use of individual elements, it may be redundant to subclone and store the PCR product. Instead, the Golden Gate assembly can be performed directly with PCR products, resulting in faster and more flexible transgene generation. To demonstrate that ImPaqT also allows for rapid creation of functional transgenes by cloning directly from PCR, we assembled Tg(mpeg1.1:tdTomato-p2A-rac2WT) and Tg(mpeg1.1:tdTomato-p2A-rac2D57N) by using PCR products directly for the Golden Gate assembly reaction without subcloning into vectors. Rac2 is a small GTPase involved in immune cell migration (Salas-Vidal et al., 2005), and dominant-negative mutations of Rac2, including the patient-derived D57N mutation, are linked with migration arrest in immune cells (Deng et al., 2011; Rosowski et al., 2016). Here, we used the macrophage-specific mpeg1.1 promoter to drive tdTomato followed by a self-cleaving peptide and then either Rac2 (Rac2WT) or a dominant-negative mutant form of Rac2 (Rac2D57N). N-terminal tagging of Rac2 is necessary as Rac2 undergoes a C-terminal prenylation event, which is required for its membrane localization and activity. As this approach required us to invert our usual N-terminal gene, C-terminal fluorescent protein order, the flexibility afforded by PCR cloning simplified the construction of this swapped gene order. To generate these two transgenes, PCR products encoding the macrophage-specific promoter mpeg1.1 with overhangs O1 and O2, tdTomato with overhang O2 and O3, and p2A with overhang O3 and O3B (CTCG) were combined together with a synthesized dsDNA fragment encoding either wildtype or dominant-negative rac2 with overhangs O3B and O4 (Figure 6A, Supplementary file 1). These fragments were cloned together with the already existing backbone vector to generate Tg(mpeg1.1:tdTomato-p2A-rac2WT) and Tg(mpeg1.1:tdTomato-p2A-rac2D57N) (Figure 6A–C). The final transgene construct was injected into embryos at single-cell stage. To observe macrophage migration, at 2 dpf, embryos were anesthetized and the tip of the tail fin was cut with a scalpel to create a wound. Subsequent imaging demonstrated that while in Tg(mpeg1.1:tdTomato-p2A-rac2WT) embryos macrophages readily migrated to the wound in the tail fin 2 hr post wounding (Figure 6D), in Tg(mpeg1.1:tdTomato-p2A-rac2D57N) animals, macrophages were frequently observed throughout the body but were not seen migrating to the tail wound throughout imaging (Figure 6E). Together, this data provided proof of concept that ImPaqT can be used for rapid generation of functional transgenes and also offered new insights about the utility of this toolkit for immunological research. ImPaqT allows for rapid transgene generation by Golden Gate assembly from PCR. (A) Schematic of PCR amplified fragments mpeg1.1, tdTomato, and p2A containing PaqCI, N4 and overhangs O1 (TTCC), O2 (CAAA), O3 (GCTA), and O3B (CTCG) and dsDNA fragment encoding rac2WT or rac2D57N containing O3B and O4 (AGGA). (B) Schematic of the Golden Gate assembly of mpeg1.1, tdTomato, p2A, and rac2WT or rac2D57N into the backbone vector. (C) Illustration of the final assembly products Tg(mpeg1.1.tdTomato-p2A-rac2WT/D57N). Images of a Tg(mpeg1.1.tdTomato-p2A-rac2WT) F0 (D) and Tg(mpeg1.1.tdTomato-p2A-rac2D57N) F0 (E) larva 2 hr post tail wounding showing macrophages. Discussion Transgenic animals remain essential for many research questions. They enable the visualization of cells and tissues, molecular pathways, immune responses, and the perturbation of these pathways to identify the molecular mechanisms driving pathology. Use of the zebrafish as a model organism has been steadily increasing in many research disciplines due to the unique advantages of this model. This is true in immunology and host–pathogen interactions, where the optical transparency afforded by the zebrafish model has led to many research discoveries, but where, as a new immunology model, there are limited transgenic tools. Here, we demonstrate a new cloning toolkit for the generation of immunological transgenes that is based on Golden Gate cloning. The Golden Gate approach results in shorter overlap regions (4 bp) than recombination-based techniques like Gateway cloning, while compared to seamless, homology-based cloning methods such as Gibson cloning, it allows for straightforward modular cloning approaches. The Golden Gate approach also takes advantage of off-the-shelf restriction enzymes and ligase, compared to other cloning approaches which use proprietary enzymes for cloning. We have termed this toolkit ImPaqT – Immunological Toolkit for PaqCI-based Golden Gate Assembly of Tol2 Transgenes. It includes a range of immunologically focused promoters along with genetic tools and fluorescent proteins that can be assembled using PaqCI-based Golden Gate cloning. These tools will enable the flexible assembly of transgenes to drive expression and to genetically manipulate, purify, and ablate immune cell populations of interest. While zebrafish possess the same immune lineages of other vertebrates, as a relatively new model for immunology studies, the zebrafish has a more limited array of cell type-specific promoters than mouse models. For instance, despite the identification of potential NK- and ILC-specific (Hernández et al., 2018) as well as mast cell-specific (Dobson et al., 2008) genes, promoters specific for these cell populations have not been described. As new immune-specific promoters are identified, these can be readily added to this toolkit. While we have targeted the immune system as a particular area of need, this Golden Gate approach can also be adapted to any other tissue or cell lineages within the zebrafish. While Golden Gate cloning enables the use of shorter homology stretches and the combinatorial use of constructs for the assembly of diverse transgenes, as a restriction enzyme-based system, a limitation of Golden Gate systems, compared to other assembly approaches, has been the risk of off-target cutting within the cloned sequences. This off-target cutting requires mutation of insert sequences to eliminate these sites (termed domestication) (Marillonnet and Grützner, 2020; Bird et al., 2022; Grützner and Marillonnet, 2020), which can potentially alter the function of domesticated promoters and genes. While domestication can result in changes in the sequence that may alter the behavior of the genetic element, these in principle can be managed for genes of interest using silent mutations in critical bases. Commonly, endogenous PaqCI sites can be mutated by PCR amplification of the element using primers designed to incorporate a silent mutation in the PaqCI site (e.g. CACCTGC is changed to CACCTCC) (Figure 1—figure supplement 3A), followed by In-Fusion cloning to reconstitute the construct (Figure 1—figure supplement 3B, C). Alternatively, domestication can be performed in other ways, for example by using overlap extension PCR or QuickChange. While promoters cannot be managed through the same approach, promoter fragments used for zebrafish are frequently large (commonly 2–6 kb) and it is unlikely that the mutation of a single base pair will inadvertently ablate the promoter activity. Consistent with this, we have not seen any changes in promoter activity or localization in the two promoters that we domesticated for the ImPaqT toolkit, although further cloning of additional promoters will more completely test this idea. Our choice of PaqCI itself seeks to address the limitations of domestication, as PaqCI uses a 7 base recognition site. In contrast to the 6 base-cutters that have been described in previous zebrafish Golden Gate approaches (Kirchmaier et al., 2013; Jiang et al., 2023), the rare cutting of PaqCI (approximately one in every 17 kb) makes this enzyme better suited for the large DNA fragments that are frequently used for zebrafish promoters. As a Golden Gate-based toolkit, ImPaqT introduces only short (4-base) overlap regions between individual elements, in contrast to recombination-based systems like Gateway that require the addition of long (20–25 bp) sequences. However, it must be considered that the addition of 4 extra bases could still potentially lead to side effects on the endogenous functions of promoters or proteins. While it is unlikely that the addition of 4 bases for promoters or 2 codons for proteins has detrimental effects, for some proteins that require free C- or N-termini, these methods could be disruptive and other methods of targeting, including internal tagging or transgenesis markers, need to be used. In critical cases, overhang sequences can be designed to match the sequence of the final product, ensuring that there is ultimately no sequence change from the endogenous sequence (Bird et al., 2022) at the cost of reduced flexibility. Similarly, in the case of promoters, the 4 bp addition could rarely result in the creation of novel transcription factor binding sites, given the short sequences that are recognized by these proteins. This might be magnified at the transcriptional start site, given the density of regulatory elements here. Importantly, consistent with the relative rarity of these risks to both proteins and promoters, we have not observed any side effects on endogenous functions of promoters or proteins in our study. A limitation of existing systems has been the use of a fixed number of constructs for assembly of the transgene. One benefit of the Golden Gate-directed system is that it can be expanded for cloning of complex transgenes, with some Golden Gate assemblies encompassing 20 or even more than 50 fragments (Kucera, 2021; Pryor et al., 2022). While we have designed the system to incorporate 4 distinct DNA segments (3 inserts and a backbone vector), the flexibility of Golden Gate cloning means that our system can be readily expanded and contracted while maintaining compatibility with the other components of the kit. As proof of concept, we were able to break a single 5E encoding the ubb promoter into 3 distinct plasmids that we could subsequently assemble together with existing ME, 3E, and backbone elements to generate a functional ubb-driven transgene. The flexibility of this system will simplify the construction of large and complex transgenes. Potential applications would include breaking up larger promoter fragments into smaller and easier to clone elements, insertion of recombination sites for enzymes like Cre or Flp for rearrangement, assembly of multipromoter constructs encoding genes such as Cas9 and CRISPR gRNAs for cell type-specific knockout, or the inclusion of epitope or localization tags. Our largest reaction comprised six fragments (Figure 5), although in theory, ImPaqT allows for the assembly of even more elements than investigated here. While larger constructs are likely possible, in our experience, six fragments is a sufficient level of complexity for most transgenes. In addition, we have also shown that ImPaqT can be used to rapidly generate functional transgenes by Golden Gate assembly of PCR products and larger dsDNA fragments that can be readily ordered from suppliers without the need to subclone insertion elements into vectors prior to the assembly. The Golden Gate assembly of PCR products saves time and can be useful for rapid testing of new elements or for the single use of individual constructs when long-term storage, multiple uses, or sharing is not planned. Lastly, while we have applied this Golden Gate method for the construction of Tol2 transgenes, the advantages of the PaqCI-Golden Gate method will likely be useful for the editing of zebrafish by other approaches as well. For instance, CRISPR insertion has been increasingly used to generate knock-in zebrafish lines via either homologous recombination, non-homologous methods, or by using short homology stretches. Knock-in approaches require the construction of donor vectors which incorporate varied sequences such as homology regions, fluorescent proteins, and stretches of genomic DNA (Albadri et al., 2017). For the application of ImPaqT for CRISPR/Cas9-mediated gene editing, we also incorporated the element polyA-gRNA:U6 with a gRNA targeting either a control site (Zhou et al., 2018) or GFP that can be used as either a non-targeting gRNA or to assess the efficiency of gene disruption in GFP-expressing populations, with both under the control of the U6 promoter. The construct is included in the library as a 3′ element but with overhang sequences CGTA (O3C) and O4 to enable the more complex constructions that are frequently seen in these constructs (e.g. a tissue-specific promoter, Cas9, a fluorescent protein, and the U6-promoter-gRNA cassette). The gRNA sequences of 3E polyA-gRNA:U6 can easily be exchanged by homology-directed cloning to address new targets. Similarly, many groups also use I-SceI insertion approaches to generate transgenic zebrafish (Hoshijima et al., 2016). The PaqCI Golden Gate method could be adapted to simplify the construction of transgenes and editing constructs for these other approaches as well. Although the Golden Gate approach is similarly efficient to other methods to generate transgenesis constructs, the minimal additional sequence and the ability of the Golden Gate method to expand and contract as needed provide flexibility that is beneficial for all of these editing and transgenesis methods. Our efforts here have been focused on immune populations, but the toolkit can also be broadened for use beyond the immune system. In fact, with the addition of new cell-type-specific promoters, the tools in ImPaqT can be used in other fields, such as developmental biology, regeneration, and neuroscience, in which the zebrafish has been a popular model organism. Materials and methods Key resources tableReagent type (species) or resourceDesignationSource or referenceIdentifiersAdditional informationStrain, strain background (Danio rerio)*AB wildtypeZebrafish International Resource Center/laboratory stockRRID:ZIRC_ZL1, ZFIN ID: ZDB-GENO-960809-7Background/wildtype strainGenetic reagent (Danio rerio)Tg(lyz:mTurquoise2)ber2This paperN/ANew transgenic zebrafish lineGenetic reagent (Danio rerio)Tg(irg1:tdStayGold)ber3This paperN/ANew transgenic zebrafish lineGenetic reagent (Danio rerio)Tg(ubb:mTurquoise2)ber4This paperN/ANew transgenic zebrafish lineGenetic reagent (Danio rerio)Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry)cz1701 Mosimann et al., 2011 RRID:ZFIN_ZDB-ALT-110124-1Obtained from EZRCGenetic reagent (Danio rerio) Tg(lyz:EGFP)nz117 Hall et al., 2007 RRID:ZFIN_ZDB-ALT-071109-2Previously described zebrafish lineChemical compound, drugLPSSigma-AldrichCat. # F3665, CAS No. 93572-42-0Stimulation of irg1 promoterChemical compound, drugPTUSigma-AldrichCat. # P7629, CAS No.103-85-5Reduction of pigmentationSoftware, algorithmFiji/ImageJNIHRRID:SCR_002285Image analysis Zebrafish husbandry and handling Zebrafish (D. rerio) embryos were raised in petri dishes containing E3 medium at 28°C for up to 5 days. Animals older than 5 days were maintained in a circulating system with constant water conditions of 28°C, pH 7.0–7.3, and a conductivity of 600–700 µS on a 12-hr light/12-hr dark cycle. They were fed twice a day with artemia and once a day with dry food. All experiments were conducted in accordance with institutional, state, and German ethical and animal welfare guidelines and regulations. Zebrafish husbandry and experiments were approved by the Landesamt für Gesundheit und Soziales (LaGeSo, Berlin, Germany, approval number: G0151/23). Generation of transgenic zebrafish lines Zebrafish strains All zebrafish strains, including Tg(lyz:mTurquoise2)ber2, Tg(irg1:tdStayGold)ber3, and Tg(ubb:mTurquoise2)ber4, were in the *AB wildtype background and generated in this study by applying the Tol2 transgenesis system as previously described (Kawakami et al., 2004). Transient injection of Tg(irg1:icre-p2A-mTurquoise2) and Tg(mpeg1.1:tdTomato-p2A-rac2WT/D57N) were also done in *AB background. Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry)cz1701 zebrafish were obtained from the European Zebrafish Resource Center (EZRC, Karlsruhe, Germany). Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry)cz1701 (Mosimann et al., 2011) and Tg(lyz:EGFP)nz117 (Hall et al., 2007) have been previously described. Preparation of the backbone vector and inserts The backbone vector containing the LacZ gene flanked by PaqCI sites and Tol2 arms in a vector backbone with a pMB1 origin and an AmpR gene for bacterial selection (pTWIST Amp High Copy) was purchased from Twist Bioscience (South San Francisco, CA, USA). The complete sequence is shown in Figure 1—figure supplement 2. Primer sequences are shown in Supplementary file 2. Gene fragments for runx1 +23 (with the endogenous PaqCI site mutated), tdStayGold, and truncated human LNGFR (zebrafish codon optimized and with endogenous PaqCI sites mutated) were purchased from Twist Bioscience and TOPO cloned into pCRII TOPO (Thermo Fisher, Zero Blunt TOPO) (Thermo Fisher, Waltham, MA, USA). The sequence for rac2WT and rac2D57N containing PaqCI sites, spacer sequence (N4), overhangs O3B and O4, as well as 6–8 additional bases at the 5′ and 3′ ends (N6–8), and the sequence for the element polyA-gRNA(Control):U6 and polyA-gRNA(GFP):U6 (Addgene Plasmid #107599) (Addgene, Watertown, MA, USA) containing PaqCI sites, N4, overhangs O3C and O4 were purchased as gBlocks from Integrated DNA Technologies (IDT, Coralville, IA, USA). The complete sequences are shown in Supplementary file 1. PaqCI recognition sites with 4-base spacer sequences and 4-base overhangs were added to DNA sequences via PCR amplification. Primers were designed to add PaqCI sites such that cleavage resulted in a gene fragment with a 4-base overhang that is compatible with the overhang of another gene fragment that will be adjacent to it in the final assembly. Appropriate 4-base overhang sequences were confirmed using the online tool NEBridge Ligase Fidelity Viewer (New England Biolabs (NEB), Ipswich, MA, USA). PCR amplification was performed using Q5 polymerase (NEB) and analyzed by gel electrophoresis. The PCR product was cleaned up or, in case of multiple bands, the band of correct size was excised under UV light using a clean scalpel and DNA was extracted using Nucleo Spin Gel and PCR Clean-up Kit (Macherey-Nagel, Düren, Germany). DNA sequences were confirmed by sequencing. Gel purified gene fragments were subcloned into a Zero Blunt TOPO vector (Invitrogen, Waltham, MA, USA) and transformed into competent NEB 5α E. coli cells (C2987H). Cells were cultivated in LB medium (Carl Roth, Karlsruhe, Germany) containing 50 µg/ml Kanamycin (Sigma-Aldrich, St. Louis, MO, USA) and plasmids were isolated using the Nucleo Spin Plasmid Quick Pure protocol (Macherey-Nagel). For the Golden Gate assembly of transgenes from PCR, inserts were PCR amplified with an additional 6–8 bases added to the 5′ and 3′ ends for efficient restriction digestion and Golden Gate assembly directly from PCR. Both the ubb and lck promoters had endogenous PaqCI cleavage sites in the promoter sequence. To domesticate these promoters, we mutated these PaqCI sites with the indicated PCR primers (Supplementary file 2) and assembled them with In-Fusion cloning (Takara Bio, Kusatsu, Japan). Golden Gate-based assembly of expression constructs Golden Gate assembly was performed according to the NEB protocol. In detail, 75 ng of the backbone vector and each insertion construct was mixed with 10 U PaqCI (NEB), 0.5 µl PaqCI activator (20 µM) (NEB), and 400 U T4 DNA ligase (NEB) in T4 DNA ligase buffer (NEB) to a final volume of 20 µl. Final assembly product was obtained after 60 cycles of incubation at 37°C for 1 min and incubation at 16°C for 1 min, followed by 5 min incubation at 37°C and 5 min incubation at 60°C using a thermocycler (Bio-Rad, Hercules, CA, USA). The final product was transformed into competent NEB 5α E. coli cells (C2987H) and cells were cultivated in LB medium containing 20 µg/ml Ticarcillin (G-Biosciences, Stl. Louis, MO, USA). Plasmids were isolated using the Nucleo Spin Plasmid Quick Pure protocol and PCR purified using the Nucleo Spin Gel and PCR Clean-up Kit before microinjection. Microinjections The injection mixture contained 25 ng/µl polyadenylated mRNA encoding the Tol2 transposase, 50 ng/µl transposon donor plasmid, and 0.3% phenol red in a final volume of 10 µl 1X Tango Buffer (Thermo Fisher). The mMessage mMachine kit (Life Technologies, Carlsbad, CA, USA) was used to transcribe the mRNA from T3TS-Tol2 (Balciunas et al., 2006), which was subsequently polyadenylated using E. coli polyA polymerase (NEB). A volume of ~1 nl was injected into the single cell of fertilized eggs by using a microinjector (World Precision Instruments, Sarasota, FL, USA). Imaging Injected larvae were screened for insertion of the transgene at 2 dpi using a Nikon ECLIPSE Ti2 microscope (Nikon, Tokyo, Japan) with a Dragonfly 200 confocal system (Oxford Instruments, Abingdon, United Kingdom). Animals that were positive for the transgene were raised to adulthood and outcrossed to the *AB wildtype strain for selection of transgenic founder zebrafish. Before screening Tg(irg1:icre-p2A mTurquoise2) and Tg(irg1:tdStayGold) embryos, the activity of the irg1 promoter was induced by injection of LPS (Sigma-Aldrich, F3665) (final: 0.8 mg/ml). For that purpose, animals were anesthetized with tricaine (MS-222) (Pharmaq, Overhalla, Norway) at a final concentration of 0.016% and injected into the caudal vein with LPS. Screening was performed at least 4 hr after injection. To reduce pigmentation, Tg(-3.5ubb:LOXP-EGFP-LOXP-mCherry) embryos were treated with 45 µg/ml 1-phenyl-2-thiourea (PTU) (Sigma-Aldrich) starting ca. 20 hr post fertilization. To visualize macrophage migration in Tg(mpeg:tdTomato-p2A-rac2WT/D57N) embryos, animals at 2 dpf were anesthetized with 0.016% tricaine and a piece of the tail fin was cut with a scalpel, followed by imaging 2 hr post transection. Image analysis was performed using the Fiji ImageJ software (National Institutes of Health, Bethesda, MD, USA). Line and reagent availability All new lines and plasmids are available from the corresponding author upon contact. This study introduces a valuable toolkit for zebrafish transgenesis, significantly enhancing the flexibility and efficiency of transgene generation for immunological applications. The authors provide convincing evidence through well-designed experiments, demonstrating the toolkit's utility in generating diverse and functional transgenic lines. Summary: The authors introduce ImPaqT, a modular toolkit for zebrafish transgenesis, utilizing the Golden Gate cloning approach with the rare-cutting enzyme PaqCI. The toolkit is designed to streamline the construction of transgenes with broad applications, particularly for immunological studies. By providing a versatile platform, the study aims to address limitations in generating plasmids for zebrafish transgenesis. Strengths: The ImPaqT toolkit offers a modular method for constructing transgenes tailored to specific research needs. By employing Golden Gate cloning, the system simplifies the assembly process, allowing seamless integration of multiple genetic elements while maintaining scalability for complex designs. The toolkit's utility is evident from its inclusion of a diverse range of promoters, genetic tools, and fluorescent markers, which cater to both immunological and general zebrafish research needs. Even small DNA fragements, such as the viral 2a sequence, can be cloned into a multi-component plasmid in one step. The components can be assembled from PCR fragments or synthesized DNA fragments, forgoing the need for "entry" vectors. Further, the authors show that the exisiting PaqCI sites can be domesticated to improve the versatility of the system. The validation provided in the manuscript is Convincing, demonstrating the successful generation of several functional transgenic lines. These examples highlight the toolkit's efficacy, particularly for immune-focused applications. Comments on revisions: The authors have addressed all the concerns raised in the first review. Congratulations to the authors for their effort. Summary: Hurst et al. developed a new Tol2-based transgenesis system, ImPaqT, an Immunological toolkit for PaqCl-based Golden Gate Assembly of Tol2 Transgenes, to facilitate the production of transgenic zebrafish lines. This Golden Gate assembly-based approach relies on only a short 4-base-pair overhang sequence in the final construct, and the insertion construct and backbone vector can be assembled in a single-tube reaction using PaqCl and a ligase. This approach can also be expandable by introducing new overhang sequences while maintaining compatibility with existing ImPaqT constructs, allowing users to add fragments as needed. The generation of several transgenic zebrafish lines for immunological studies demonstrates the feasibility of the ImPaqT in vivo. Lineage tracing of macrophages via LPS injection demonstrates the approach's functionality and validates its use in vivo. Comments on revisions: The authors have addressed all my concerns. The following is the authors’ response to the original reviews. We thank the reviewers and editors for their careful reading of our manuscript and thoughtful comments on it. We appreciate the overall positive opinion on our manuscript and helpful comments and suggestions from the reviewers. Overall, the main points identified by reviewers were (1) further broadening of the system to a range of inputs as well as the construct types that can be generated with the system and (2) Further consideration of any off-target joining or off-target effects on genes/proteins and the limits to the expandability of the kit. To address these concerns, we have added new data in Figure 6, illustrating the generation of a new construct using PCR and dsDNA fragments, new constructs for mpeg1.1 and for CRISPR gRNA expression and have revised the text to further address concerns and limitations of the toolkit. We thank the reviewers and editors for these suggestions and feel that they have substantially improved the manuscript. Public Reviews: Reviewer #1 (Public review): Summary: The authors introduce ImPaqT, a modular toolkit for zebrafish transgenesis, utilizing the Golden Gate cloning approach with the rare-cutting enzyme PaqCI. The toolkit is designed to streamline the construction of transgenes with broad applications, particularly for immunological studies. By providing a versatile platform, the study aims to address limitations in generating plasmids for zebrafish transgenesis. Strengths: The ImPaqT toolkit offers a modular method for constructing transgenes tailored to specific research needs. By employing Golden Gate cloning, the system simplifies the assembly process, allowing seamless integration of multiple genetic elements while maintaining scalability for complex designs. The toolkit's utility is evident from its inclusion of a diverse range of promoters, genetic tools, and fluorescent markers, which cater to both immunological and general zebrafish research needs. Furthermore, the modular design ensures expandability, enabling researchers to customize constructs for diverse experimental designs. The validation provided in the manuscript is solid, demonstrating the successful generation of several functional transgenic lines. These examples highlight the toolkit's efficacy, particularly for immune-focused applications. We appreciate the overall positive evaluation of our toolkit and the time and effort in evaluating it. Weaknesses: While the toolkit's technical capabilities are well-demonstrated, there are several areas where additional validation and examples could enhance its impact. One limitation is the lack of data showing whether the toolkit can be directly used for rapid cloning and testing of enhancers or promoters, particularly cloning them directly from PCR using PaqCI overhangs without needing an entry vector. Similarly, the feasibility of cloning genes directly from PCR products into the system is not demonstrated, which would significantly increase the utility for researchers working with genomic elements. This is an excellent point. Given the increased use of gene synthesis and dsDNA fragments, we also thought it was good to demonstrate incorporation of these as well. We have added a new figure, Figure 6, which demonstrates generation of two new transgene constructs constructed by direct cloning of three PCR products along with a synthetic dsDNA fragment into a Tol2 flanked backbone plasmid as an alternative, rapid approach to generation of transgenes. The resulting plasmids, encoding the mpeg1.1. promoter, a separate p2a, and a tdTomato fluorescent protein along with either wildtype or dominant negative rac2 were properly assembled and in transient transgenic zebrafish injected with these constructs, dominant negative rac2 prevented macrophage recruitment to tail wounds, indicating that this approach worked for the generation of functional transgenes. These results are discussed in new text (lines 304-391) describing this new experiment and the finding that both PCR products and synthesized dsDNA could be efficiently incorporated in constructions generated with our approach as well as in the discussion (lines 494-499). The authors discuss potential applications such as using the toolkit for tissue-specific knockout applications by assembling CRISPR/Cas9 gRNA constructs. However, they do not demonstrate the cloning of short fragments, such as gRNA sequences downstream of a U6 promoter, which would be an important proof-of-concept to validate these applications. Furthermore, while the manuscript focuses on macrophage-specific promoters, the widely used mpeg1.1 promoter is not included or tested, which limits the toolkit's appeal for researchers studying macrophages and microglia. Yes, in the new figure described above, we have now shown that this method works with shorter PCR fragments such as the p2a fragment cloned within the tdTomato-p2a-rac2 constructs described above. This fragment is ~70 bp and while this is somewhat longer than a simple gRNA targeting sequence (though smaller than a complete sgRNA), we believe that this indicates that smaller size fragments can still be incorporated within these constructs. We also agree with the general idea of increasing functionality to incorporate CRISPR/Cas9 and now include a 3E encoding the zebrafish U6 promoter. As CRISPR expression constructs frequently incorporate complex construction, for instance, expression of tagged Cas9 along with the U6 driven gRNA as in Zhou et al., 2018 or along with rescue constructs as in Wang et al., 2021, we have given these constructs the non-standard 5’ end O3c, to enable multiplexing in these complex constructs. We agree that it is important to include mpeg1.1, given the broad use of this promoter within the field, we’ve now included an 5E mpeg1.1 construct within the toolkit. Another potential limitation is the handling of sequences containing PaqCI recognition sites. Although the authors discuss domestication to remove these sites, a demonstration of cloning strategies for such cases or alternative methods to address these challenges would provide practical guidance for users. Absolutely, we have now included a new figure (Supplementary Figure 6) that illustrates one domestication approach using PCR and homology-based cloning as an easy approach to domestication. In addition, we have also mentioned alternative approaches for domestication in the discussion (lines 439-444). Reviewer #2 (Public review): Summary: Hurst et al. developed a new Tol2-based transgenesis system ImPaqT, an Immunological toolkit for PaqCl-based Golden Gate Assembly of Tol2 Transgenes, to facilitate the production of transgenic zebrafish lines. This Golden Gate assembly-based approach relies on only a short 4-base pair overhang sequence in their final construct, and the insertion construct and backbone vector can be assembled in a single-tube reaction using PaqCl and ligase. This approach can also be expandable by introducing new overhang sequences while maintaining compatibility with existing ImPaqT constructs, allowing users to add fragments as needed. Strengths: The generation of several lines of transgenic zebrafish for the immunologic study demonstrates the feasibility of the ImPaqT in vivo. The lineage tracing of macrophages by LPS injection shows this approach's functionality, validating its usage in vivo. We appreciate the positive sentiments for our toolkit and the effort put into reviewing our manuscript. Weaknesses: (1) There is no quantitative data analysis showing the percentage of off-target based on these 4bp overhang sequences. While we agree that this is an important variable for the method, we feel that previous studies that have broadly tested off-target effects of all potential 4 bp overhang sequences have already given an effective overview of interactions between each of these overhangs (Potapov et al., 2018; Pryor et al., 2020). The results from these studies were incorporated into the NEB ligase fidelity viewer that we used to predict the overhangs that would have minimal off-target with each other: the tool also reports the expected off-target ligation of individual 4 bp overhangs. In all cases, we selected overhangs that would have minimal off-target efficiency, with each of the overhangs showing 1% or less off-target ligation with any of the other overhangs chosen. We have added new text, lines 119-124, that further clarifies that our selection for these ends. (2) There is no statement for the upper limitation of the expandability. Yes, we’ve been curious as well. While our cloning of 6 distinct fragments in Figure 5 and a new 5 fragment cloning added in revision seen in Figure 6, suggests that 5-6 fragments can be readily assembled, in the course of revisions we also attempted to generate a larger product of 11 fragments that ultimately failed. While the 11 fragment construct was unsuccessful, it is unclear whether this is due to the constructs chosen, the potential size of the plasmid or due to a failure of the technique/enzymes themselves. Given that published descriptions of PaqCI Golden Gate cloning approaches have found that PaqCI can assemble at least 32 fragments and can produce large sequences (e.g. in Sikkema et al., 2023, where they assemble the ~40 kbp T7 genome from 12, 24 and 32 distinct fragments using a PaqCI Golden Gate reaction), we suspect that our issues with the 11 fragment assembly are likely due to complications with the specific group of constructs that were combined, however, we have not been able to exhaustively test a range of constructs and assemblies of varying complexity levels. To recognize this, we have added additional text (lines 490-493) to the discussion describing that we have only combined 6 constructs, but that we think that this likely encompasses many of the applications that may be needed for this system, while recognizing that expansion beyond this number may be possible. (3) There is no data about any potential side effect on their endogenous function of promoter/protein of interest with the ImPaqT method. Absolutely, we have added new text (lines 457-470) to our discussion describing the potential side effects on protein function. For instance, the need to be aware of whether N- or C-termini of proteins can be modified and recognition of the potential for affecting/creating ectopic transcription factor binding sites as potential pitfalls to keep in mind. Recommendations for the authors: Reviewer #1 (Recommendations for the authors): The data presented in the manuscript is robust and well-supported. However, to fully demonstrate the broad applicability of the toolkit and strengthen its impact, a few additional experiments could be beneficial. Specific suggestions for these experiments and areas of improvement are outlined in the 'Weaknesses' section of the Public Review. Additionally, Figures 2-4 illustrate the same concept - cloning three fragments from entry vectors-which comes across as repetitive. Incorporating a more diverse range of use cases would better highlight the versatility of the toolkit. As we described in our replies to your public points above, we have now added new Figure 6 and new Supplementary Figure 6 addressing the cloning of PCR fragments, short fragments as well as a mechanism of domestication. We have also included the mpeg1.1 promoter within the toolkit. In addition, your point on the repetition of assay is fair and in our new Figure 6, we instead used wild type and dominant-negative Rac2 expression and failure of macrophage recruitment to the tail wound. Reviewer #2 (Recommendations for the authors): Hurst et al. developed a new Tol2-based transgenesis system ImPaqT, it is interesting and potentially efficient, but I have a few concerns: (1) The author claimed that the ImPaqT system is more efficient than other existing systems. The authors should provide such data to support their claim. Our argument wouldn’t be that the ImPaqT system is strictly speaking more efficient, but rather that the combination of minimal added sequence, the ability to expand or contract the fragments used, and, in our new Figure 6, the ability to directly utilize PCR products and dsDNA fragments, while retaining the ability to combinatorially build constructs from a suite of existing sequences is the main point of the method. We now explicitly state that Golden Gate cloning isn’t more efficient than existing techniques in the text (lines 534-537), but rather the particular strength of the method is the flexibility and minimal added sequence. (2) The ImPaqT is theoretically less prone to have off-target effects than existing systems, the authors should provide such data to validate their claim. Good point, we have now searched the zebrafish genome for PaqCI sites as well as for BsaI and BsmBI which are the 6-base cutters most commonly used for Golden Gate cloning. We found that PaqCI cuts every ~17 kb in the zebrafish genome while BsaI and BsmBI cut every ~9 kb or ~13 kb respectively, further supporting that PaqCI sites are rarer in the genome and should generally require domestication less often. We have now added new text describing this in lines 129-132. (3) The authors should mention any potential side effects of this system on the endogenous function of the promoter/protein of interest, at least in their discussion part. Yes, this should absolutely be expanded, as we said in your public comments above, we have now added new text describing potential pitfalls that this method may have on promoter or gene expression. (4) The authors are suggested to provide a balanced discussion about the expandable usage of this system beyond the immune system. We agree, this is also a good point that we should have emphasized more. We’ve added new text (lines 537-541) recognizing that in principle, many of the components we’ve derived should be useful in non-immune systems, but we also recognize that adapting this to new tissues will require the development of new promoters within the Golden Gate system which can be combined with these already developed tools. References Potapov, V., Ong, J.L., Kucera, R.B., Langhorst, B.W., Bilotti, K., Pryor, J.M., Cantor, E.J., Canton, B., Knight, T.F., Evans, T.C., Jr., et al. (2018). Comprehensive Profiling of Four Base Overhang Ligation Fidelity by T4 DNA Ligase and Application to DNA Assembly. ACS Synth Biol 7, 2665-2674. Pryor, J.M., Potapov, V., Kucera, R.B., Bilotti, K., Cantor, E.J., and Lohman, G.J.S. (2020). Enabling one-pot Golden Gate assemblies of unprecedented complexity using data-optimized assembly design. PLoS One 15, e0238592. Sikkema, A.P., Tabatabaei, S.K., Lee, Y.J., Lund, S., and Lohman, G.J.S. (2023). High-Complexity One-Pot Golden Gate Assembly. Curr Protoc 3, e882. Wang, Y., Hsu, A.Y., Walton, E.M., Park, S.J., Syahirah, R., Wang, T., Zhou, W., Ding, C., Lemke, A.P., Zhang, G., et al. (2021). A robust and flexible CRISPR/Cas9-based system for neutrophilspecific gene inactivation in zebrafish. J Cell Sci 134. Zhou, W., Cao, L., Jeffries, J., Zhu, X., Staiger, C.J., and Deng, Q. (2018). Neutrophil-specific knockout demonstrates a role for mitochondria in regulating neutrophil motility in zebrafish. Dis Model Mech 11.