Dithiocarbamate derivatives: modern synthetic methods, mechanistic insights, and future perspectives Authors: Saumy Sharma, Soumya Tripathi, Subhash Banerjee Published: 2026 ABSTRACT Organic dithiocarbamates are an important class of sulfur-containing compounds with widespread applications in various fields including, medicinal chemistry, agrochemicals, materials science, and catalysis, etc. The present review article summarizes recent advancements in the synthesis of organic dithiocarbamates, highlighting diverse synthetic strategies, including multicomponent reactions, catalyst-free as well as catalyst-assisted protocols, green and sustainable approaches, and solvent-free methodologies. The scope of these methods is critically discussed with respect to substrate compatibility, reaction efficiency, and functional group tolerance. Furthermore, key challenges such as catalyst recyclability, selectivity, scalability, and environmental concerns are discussed, providing insights into future directions for the development of efficient and sustainable dithiocarbamate synthesis. Introduction Dithiocarbamates are an important group of sulfur-containing organic compounds with the general structure (R2N–C(S)–S). Their unique functionalization, comprising nitrogen and sulphur atoms with different alkyl or (hetero)aryl side groups, not only enhances their biological and pharmaceutical activities but also enables numerous possibilities for the fabrication of structurally diverse organic dithiocarbamate moieties.1 Interestingly, in pharmaceutics, various functionalized carbamates play various roles, such as anti-infectives,2 antifungals,3–5 antibacterials,6 antioxidants,7–9 antivirals,10–14 anti-Alzheimer's,15–17 anti-glaucoma,18 anti-tuberculosis,19–22 and anticancer agents,23,24 among others. The structures of a few representative biologically active dithiocarbamate compounds have been presented in Fig. 1. Apart from biomedical applications, they have also shown their efficiency in different fields, such as organic synthesis,25,26 environmental remediation,27–30 linkers,31,32 and accelerating agents in the vulcanization of rubber, etc.,33,34 The unique arrangements of carbon and sulphur make them great chelating agents; as a result, many reports have been made on their chelating properties with various transition and non-transition metals. These complexes have been used in applications in drug design and sensing.35 One of their key features is the ability to distribute electron density across the nitrogen and sulphur atoms, which makes them both reactive and stable. This property allows them to act as useful intermediates in organic synthesis and as strong metal-binding molecules in coordination chemistry. A few representatives of biologically active dithiocarbamate molecules. In recent years, the dithiocarbamate moieties have gained renewed interest in the research community because of their wide applications and the need for more sustainable and efficient synthetic methods. Majorly, the dithiocarbamate derivatives are prepared either by the reaction of alkali salts of dithiocarbamic acid with suitable electrophiles such as alkyl/aryl halides, epoxides, α,β-unsaturated compounds, aryl boronic acids, styrenes, etc., or by a single-step multicomponent approach consisting of the reaction of amines with carbon disulfide and the previously mentioned electrophiles.36–38 However, the two-step method has several practical difficulties. It requires the formation of alkali metal dithiocarbamate salts using strong bases such as NaOH or KOH, which can be challenging to handle. In addition, the resulting dithiocarbamate salts are not very stable and must be stored in dry, moisture-free conditions. As a result, factors such as solvent choice, reaction temperature, and sensitivity to air, moisture, and acidic environments become important challenges in this method.39–43 On the other hand, multicomponent reactions offer a more convenient and straightforward route for synthesizing a wide range of dithiocarbamates. These methods allow multiple reactants to combine in a single step, reducing the number of reaction steps, saving time, and improving overall efficiency. Such approaches are particularly useful for rapidly generating a wide range of compounds, which is important in fields such as drug discovery. Despite this advantage, many methods still rely on transition metal catalysts, toxic reagents, harmful solvents, and harsh reaction conditions. They may also suffer from low yields, limited substrate scope, higher costs, and longer reaction times. Furthermore, the synthesis of dithiocarbamates often requires metal catalysts, adding another level of complexity.44–46 Moreover, several methodologies have been developed that involve reactions of amines with expensive and hazardous reagents, such as thiophosgene, perchlorophenyl carbonochloridodithioate, sulfamidate, and isothiocyanate, etc.42,47,48 As a result, researchers have been actively developing improved synthetic strategies that are safer, more efficient, and environmentally friendly. Scheme 1 represents several methodologies for the synthesis of various dithiocarbamate derivatives under different reaction conditions. Schematic representation of different pathways, resulting in the formation of dithiocarbamate derivatives. In summary, the synthesis of dithiocarbamate derivatives has gained considerable attention due to their broad applicability in pharmaceuticals, agrochemicals, materials science, and organic synthesis. Recent advancements in synthetic methodologies, by innovations in catalysis, green chemistry, and mechanistic understanding, have significantly improved the efficiency, selectivity, and sustainability of dithiocarbamate synthesis. These developments have expanded the scope of accessible dithiocarbamate derivatives while addressing several challenges associated with conventional synthetic approaches. Motivated by the growing interest and rapid progress in this field, the present review provides a comprehensive overview on evolution of methodologies in the synthesis of dithiocarbamate derivatives. Particular focus is placed on the progression of synthetic protocols, including their reaction scope, mechanistic features, advantages, and limitations. Furthermore, the utility of these methodologies in the preparation of structurally diverse and biologically relevant dithiocarbamate-containing compounds is discussed. In contrast to previously published reviews,36–38 this work offers a critical and up-to-date perspective on dithiocarbamate synthesis by integrating recent developments. It further identifies existing knowledge gaps and proposes future research directions for the development of more efficient and environmentally benign synthetic strategies. Overall, this review aims to serve as a valuable resource for researchers seeking to develop novel and sustainable approaches for the synthesis of dithiocarbamate derivatives. Literature review on the recent advancements in the synthesis of organic dithiocarbamate derivatives As mentioned earlier, there is various kinds of strategies have been reported for the synthesis of dithiocarbamate derivatives; however, one of the most common approach is three component reaction of amines, and carbon disulphide with appropriate electrophiles. On the basis of different electrophiles, the synthesis of various dithiocarbamate derivatives has been discussed. Synthesis of dithiocarbamate derivatives by using epoxide as electrophile There are many reports are available for the three-component synthesis of dithiocarbamate derivatives by the reaction of amines, carbon disulfide, and epoxides. In this regard, Li and coworkers (2003) developed a simple and highly efficient method for the preparation of 2-hydroxyalkyl dithiocarbamate derivatives by the reaction of amines, carbon disulfide, and epoxide derivatives using anhydrous K3PO4 as a base in acetone at 0 °C at room temperature via regioselective ring opening of epoxides (product 1; Scheme 2). The desired products were obtained in moderate to good yields (62–85%). This method was found to be suitable for different classes of epoxides, bearing ether and thioether functionalities side chains, and the mild reaction conditions allow the use of substrates containing delicate functional groups, as mentioned. These advantages make the present methodology more applicable. However, its failure to produce the desired products with aromatic amines and the use of acetone as a solvent are the major limitations.49 Synthesis of 2-hydroxyalkyl dithiocarbamate derivatives by amines, carbon disulfide, and epoxides. Chaturvedi (2007) and his co-workers have developed an efficient, mild, and regioselective one-pot protocol for the synthesis of 2-hydroxy alkyl dithiocarbamates via the reaction of amines, carbon disulfide, and epoxides using Amberlite IRA 400 (basic resin) in dry DMSO at room temperature, affording high yields (78–98%) of the desired products within a reaction time of 1–1.5 h (product 2; Scheme 3). In these reactions, firstly, the amine attacks the carbon disulfide, leading to the formation of the dithiocarbamate anion, which then attacks the corresponding epoxides. The ring opening of the epoxide leads to the formation of the desired products. The advantages of the proposed method exhibit substrate versatility, mild reaction conditions, and experimental convenience. As compared to Li's method, this protocol produced high yields of the same products. However, this method was found unsuitable for the formation of N-aryl dithiocarbamate derivatives. Moreover, using dry DMSO as a solvent serves as its major drawback.50 One-pot synthesis of 2-hydroxy alkyl dithiocarbamates using Amberlite IRA 400 as a catalyst. Ranu et al. (2008) have reported an efficient ionic liquid-catalyzed three-component protocol for the synthesis of functionalized dithiocarbamate derivatives through the reaction of various aliphatic amines, carbon disulfide (CS2), and epoxides using 1-methyl-3-pentylimidazolium bromide ([pmIm]Br), which served as both catalyst and reaction medium, at room temperature (product 3; Scheme 4). A wide range of cyclic and acyclic amines was successfully employed, affording the desired dithiocarbamates in excellent yields of 86–93% within 30 minutes. The major advantages of this protocol include very short reaction times, mild and solvent-free reaction conditions, broad substrate scope, and excellent regioselectivity. However, the aromatic amines could not be employed, representing a minor limitation of the methodology.51 [pmImBr]-catalyzed synthesis of dithiocarbamate derivatives by using amines, carbon disulfide and epoxides. Movassagh and group (2012) developed a facile, convenient, and efficient protocol for the one-pot reaction of various aliphatic/aromatic amines and CS2 with various symmetric and asymmetric epoxides in ethanol at room temperature to produce the dithiocarbamate derivatives with poor to excellent yields (12–95%) under the catalyst-free conditions within the duration of 4–120 minutes (product 4–5; Scheme 5). Notably, in most of the cases of asymmetric epoxides, the nucleophile attacked the less hindered carbon of the epoxide selectively to form the product (4); however, in the case of styrene oxide, an aromatic epoxide, no selectivity was observed, and the reaction led to a mixture of products (4) and (5). This observation clearly indicates the dominance of steric factors over the electronic factors in the case of aliphatic epoxides. It was also observed that the reaction of aniline led to a poor yield (12%) of the desired product, even after a significantly longer reaction duration. Overall, this protocol provided high yields of the desired products (except with aniline) with high regioselectivity under the mild and catalyst-free reaction conditions within a short reaction period, which marks several advantages of the present protocol. However, the lack of selectivity with aromatic epoxides serves as a drawback for the reaction. As compared to Ranu's methodology, in case of styrene oxide, this protocol produced a lower yield for the product, formed by nucleophilic attack at the less-hindered carbon atom.52 Highly regioselective synthesis of 2-hydroxy alkyl dithiocarbamates by the reaction of amines, carbon disulfide, and epoxides. Azizi et al. (2012) have developed a highly efficient, green, catalyst-free, and one-pot methodology for the synthesis of dithiocarbamates via a three-component reaction of amines, carbon disulfide (CS2), and epoxides in deep eutectic solvent (choline chloride–urea) or polyethylene glycol (PEG) at room temperature (product 6; Scheme 6). The desired dithiocarbamate products were obtained in excellent yields (up to 97%) within short reaction times (60–180 minutes). The protocol exhibits a broad substrate scope, accommodating various primary, secondary, and sterically hindered amines along with a wide range of epoxides, and also demonstrates successful gram-scale synthesis and recyclability of the green solvent system without significant loss of activity. The advantages of this method include catalyst-free conditions, use of environmentally benign and recyclable green solvents, mild reaction conditions, high efficiency, short reaction times, and simple work-up procedures, making it an attractive and sustainable approach for dithiocarbamate synthesis. However, limitations such as the requirement of specific green solvent systems (DES/PEG) and slightly reduced yields upon multiple recycling.53 Reaction of amines, carbon disulfide, and epoxides, leading to the formation of dithiocarbamate derivatives by Azizi et al.53 Halimehjani and his research group (2017) have developed a facile and efficient procedure for the synthesis of various categories of N,S-heterocycles under solvent-free and catalyst-free conditions (product 7–11; Scheme 7). Firstly, the substituted thiazole-2(3H)-thione derivatives (I) were synthesized by the reaction of primary amines, carbon disulfide, and nitroepoxides in THF at room temperature within 2 h to produce the desired products in moderate to good yields (68–90%). Interestingly, under similar conditions, these starting materials in water instead of THF, as a solvent, produced moderate to good yields (67–81%) of thaizolidine-2-thiones (II). Apart from these, the reaction of secondary amines, carbon disulfide, and nitroepoxide in water at room temperature produced dithiocarbamate-substituted phenyl-2-propanones (III) with satisfactory yields (up to 90%). Further, the authors have performed the reaction of different S-alkyl dithiocarbamates with nitroepoxide derivatives under solvent-free and catalyst-free conditions, which led to the synthesis of 2-(alkylsulfanyl)thiazoles (IV) in satisfactory to excellent yields (78–93%), whilst performing the same reaction in THF in the presence of DBU led to the satisfactory yields (74–80%) of 1-(alkylsulfanyl)-1-phenylpropan-2-ones (V). This methodology offers the synthesis of a diverse range of N,S-containing heterocycles with appreciable amounts of the yields using mild and green reaction conditions, within a very short reaction period, which makes this protocol multidimensional for their practical application from the view of organic synthesis.54 Synthesis of a diverse range of N,S-heterocycles under solvent-free and catalyst-free conditions. Synthesis of dithiocarbamate derivatives by using α,β-unsaturated compounds as electrophile This section discusses various methodologies for the synthesis of dithiocarbamate derivatives, which have utilized α,β-unsaturated compounds as electrophiles, in this regard, Guo and his group (2001) have developed an efficient and mild one-pot protocol for the synthesis of β-electron-withdrawing group substituted ethyl dithiocarbamates via the conjugated addition of primary or secondary amines and carbon disulfide to electrophilic alkenes in the presence of anhydrous potassium phosphate (K3PO4) in methanol at low temperature (<10 °C) followed by room temperature, affording good yield (65–97%) of the desired products within 0.5–4 h (product 12; Scheme 8). The advantages of the proposed method include mild reaction conditions, relatively short reaction time, and efficient one-pot synthesis. In addition, the protocol shows good substrate scope with various electrophilic alkenes containing electron-withdrawing groups such as –CN, –CO2Et, –CONH2, and –NO2. However, when CH3CH Created by potrace 1.16, written by Peter Selinger 2001-2019 CHCHO, CH3CHCHCO2Et, CH2CCH3CO2Et, or PhCHCHCOCH3 was used as the electrophile, the reaction was difficult due to high steric effects, and column chromatography was used for purification, which may limit large-scale application.55 One-pot methodology leading to dithiocarbamate derivatives using anhydrous potassium phosphate. Saidi and co-workers (2006) reported a green, efficient, and straightforward methodology for the one-pot synthesis of dithiocarbamate derivatives through the reaction of amines, carbon disulfide, and α,β-unsaturated compounds in water, which acts as both a solvent and a promoter, at room temperature within 5–18 h. The desired products were obtained in moderate to excellent yields (55–96%) (product 13; Scheme 9). However, secondary amines, including pyrrolidine, piperidine, and diethylamine, produced higher yields than primary amines. Moreover, primary amines and hindered amines also underwent efficient addition with Michael acceptors to give monoadducts. The major advantage of this protocol is its simple procedure, avoiding toxic organic solvents and catalysts. However, the methodology was found to be inefficient for the transformation of aromatic amines, which represents a significant limitation of the present protocol.56 One-pot synthesis of dithiocarbamate derivatives in water. Ranu et al. (2008) reported an efficient ionic liquid-mediated three-component protocol for the synthesis of functionalized dithiocarbamate derivatives (product 14; Scheme 10(a)) via the reaction of various aliphatic amines, carbon disulfide (CS2), and α,β-unsaturated compounds. The reactions were carried out at room temperature using 1-methyl-3-pentylimidazolium bromide ([pmIm]Br), which served a dual role as both the catalyst and the reaction medium, and were completed within 30 min. A diverse range of cyclic and acyclic aliphatic amines was successfully transformed into the corresponding dithiocarbamates in excellent yields (75–98%). A plausible mechanism was proposed involving activation of CS2 by the imidazolium cation of [pmIm]Br, leading to the generation of dithiocarbamate anions, which then undergo Michael addition to form the final product (Scheme 10(b)). The protocol offers several notable advantages, including short reaction times, mild and solvent-free reaction conditions, and broad substrate scope. Nevertheless, its applicability is restricted to aliphatic amines, as aromatic amines were found to be incompatible under the optimized reaction conditions, representing a limitation of the methodology.51 (a) [pmImBr]-catalyzed reaction of amines, CS2, and α,β-unsaturated compounds at room temperature; (b) a plausible mechanism of [pmImBr]-catalyzed reaction of amines, CS2, and α,β-unsaturated compounds by Ranu et al.51 Yadav and co-workers (2009) have developed a facile, highly stereoselective, green, and one-pot three-component protocol for the synthesis of (E)- and (Z)-allyl dithiocarbamates via the reaction of Baylis–Hillman (BH) acetate derivatives, amines, and carbon disulfide in water, which plays a dual role, as a solvent and promoter at room temperature within 6–10 h, affording high yields (80–94%) of the desired products under the catalyst free conditions (product 15; Scheme 11). Notably, it was observed that methyl acrylate produced (E)-allyl dithiocarbamates, while acrylonitrile produced (Z)-allyl dithiocarbamates, selectively. Moreover, the authors have claimed the formation of 1,3-thiazine derivatives via an intramolecular cyclization by the reaction of allyl dithiocarbamates derived from benzyl amine in the presence of potassium carbonate as a base in methanol. This one-pot protocol avoids the use of bases and toxic organic solvents by utilizing water. Also, it demonstrates synthetic utility by further transformation of the formed products into 1,3-thiazine derivatives, which are of high biological importance. Collectively, these aspects make the protocol green and sustainable; however, the dependence on specific Baylis–Hillman substrates, an uncommon starting material, may limit its general applicability.57 Selective synthesis of (E)- or (Z)-allyl dithiocarbamates by Yadav and his group. Nayeri et al.58 (2011) reported an ultrasound-assisted, green, and efficient methodology for the preparation of dithiocarbamate derivatives from the one-pot reaction of amines, carbon disulfide, and α,β-unsaturated alkenes to produce the moderate to excellent yields of the desired products (60–95%) (product 16; Scheme 12). Ultrasound-assisted synthesis of dithiocarbamate derivatives by Nayeri et al., using amines, carbon disulfide, and α,β-unsaturated compounds. The green, catalyst-free, low-cost protocol, with great selectivity, was one of the key advantages of the present methodology, which makes this method a useful and attractive strategy in view of economic and environmental advantages; however, no efforts have been made for the synthesis of N-aryl dithiocarbamate derivatives. As compared to Ranu's methodology for the similar conversion, this protocol provide a lower yield of the products.58 Banerji and co-workers (2011) have developed an expedient, efficient, and environmentally benign one-pot protocol for the synthesis of organic dithiocarbamate derivatives using amines, carbon disulfide (CS2), and various Michael acceptors using basic nanocrystalline MgO as a heterogeneous catalyst in water at room temperature, affording excellent yields (up to 95%) with a great functional group tolerance within the short reaction period (0.5–2 h). The scope and generality of the conditions with other substrates were examined by using a variety of primary and secondary amines and different electrophiles, such as methyl acrylate, acrylonitrile, benzylidene acetophenone, 4-nitrobenzylidine, etc. (product 17; Scheme 13). The advantages of the protocol include its mild reaction conditions, cleanliness, fast reaction period, and involvement of water as the green solvent. Moreover, the authors have recycled the catalyst up to three cycles without significant loss of yield.59 MgO-nanoparticles employed in the synthesis of dithiocarbamate derivatives by the Michael-type addition pathway. Taimoori and co-workers (2012) have developed an efficient, versatile, and eco-friendly one-pot methodology for the synthesis of dithiocarbamate derivatives via the Michael addition of alkyl/aryl amines, carbon disulfide, and electron-deficient alkenes in the presence of OH−/silica as a basic catalyst under solvent-free conditions at 70 °C for about 10 h. The desired products were obtained in good to excellent yields (55–93%) (product 18; Scheme 14). Notably, this catalyst was found to be sufficiently potent for the synthesis of the desired products from comparatively low nucleophilic aryl amines, making it a useful and attractive strategy for the synthesis of dithiocarbamate derivatives via multicomponent reactions. Though the reactions were clean and the operational procedure was simple, experimental procedures, however, moderate yields with certain substrates, such as sterically hindered amines or less reactive Michael acceptors, may present some limitations.60 Hydroxide-supported silica-catalyzed synthesis of dithiocarbamate derivatives under solvent-free conditions. Azizi and co-workers (2012) reported a highly efficient, catalyst-free, and environmentally benign one-pot protocol for the synthesis of dithiocarbamate derivatives through a three-component reaction of amines, carbon disulfide (CS2), and α,β-unsaturated compounds, in deep eutectic solvent (choline chloride–urea) or polyethylene glycol (PEG) at room temperature (product 19; Scheme 15). The methodology afforded the corresponding dithiocarbamate products in excellent yields (72–97%) within relatively short reaction times (50–120 min). A wide variety of primary, secondary, and sterically hindered amines, as well as α,β-unsaturated compounds such as methyl acrylate, acrylonitrile, etc., were well tolerated, demonstrating the broad applicability of the protocol. Moreover, the method was successfully extended to gram-scale synthesis, and the green solvent system could be recycled several times with only a marginal reduction in catalytic performance. The protocol offers several notable advantages, including catalyst-free reaction conditions, the use of recyclable and environmentally benign solvents, mild operating conditions, high product yields, rapid reaction rates, and straightforward product isolation. These features make the methodology an attractive and sustainable strategy for the synthesis of dithiocarbamate derivatives. Nevertheless, the reliance on specific green solvent systems (DES or PEG) and the slight decline in product yields after repeated solvent recycling represent minor limitations of the protocol.53 Synthesis of dithiocarbamate derivatives by the Michael-type addition pathway by Azizi and group. Bijanzadeh and co-workers (2013) have developed a novel, green, mild, and efficient protocol for the one-pot, three-component synthesis of functionalized dithiocarbamates via the reaction of primary/secondary amines, carbon disulfide, and β-nitrostyrene derivatives under solvent, and catalyst-free (neat) conditions at room temperature, affording good to high yields (65–95%) of the desired products within 2–8 h (product 20; Scheme 16(a)). Mechanistic studies suggest that the reaction occurs via Michael addition of in situ-generated dithiocarbamic acid with nitrostyrene derivatives (Scheme 16(b)). The advantages of the proposed protocol include solvent-free, environmentally benign, and simple reaction conditions, utilizing readily available starting materials within a short reaction period. Moreover, the evaluation of antifungal activities of these synthesized dithiocarbamate compounds was also demonstrated, and strong and moderate antifungal activities have been observed against pathogenic yeast and pathogenic mould, respectively.61 (a) Synthesis of dithiocarbamate derivatives under neat conditions, and a plausible mechanism of the reaction between amines, CS2, and nitrostyrenes; (b) a plausible mechanism of the transformation. Banerjee and group (2015) have demonstrated an expeditious, novel, and green protocol for the synthesis of N-aryl dithiocarbamate derivatives in moderate to excellent yields (65–96%) via one-pot three-component reaction of aromatic amines, carbon disulfide, and α,β-unsaturated alkenes using several mesoporous copper catalysts such as Cu-MCM-41, Cu-MCM-48, and Cu-SBA-15. The reactions were performed in ethanol at room temperature within 30–90 minutes (product 21; Scheme 17). Moreover, the efficiency of the aforementioned copper catalysts was also compared, and Cu-MCM-48 was shown to have the highest catalytic efficiency, probably due to the 3D network of pores, which facilitated the interaction between the reagents. The major advantage of this protocol was the use of green reaction conditions and higher isolated yields; however, comparatively lower yields were obtained for electron-withdrawing and sterically hindered amines. Moreover, the authors have not explored the substrate scope well.62 Cu-MCM-41-catalyzed synthesis of dithiocarbamate derivatives employing the aromatic amines. Schluter and group (2016) reported a novel, green, efficient, mild, catalyst- and solvent-free methodology for one-pot, three-component synthesis of dithiocarbamate derivatives at room temperature, starting from readily available amines, CS2, and vinyl pyridines and vinyl pyrazine with complete regioselectivity (anti-Markovnikov addition), yielding good to excellent yields (60–98%) of the desired products (product 22; Scheme 18). The main advantages of this work include performing the reaction under solvent- and catalyst-free conditions at ambient temperature, excellent yield of the desired products with complete regiospecificity, green reaction conditions, and a simple work-up procedure, which makes it a useful and attractive strategy in combinatorial chemistry. However, no reaction was observed when it was performed using pyrrolidine as the amine derivative.63 Highly regioselective preparation of dithiocarbamate derivatives by following anti-Markovnikov addition. Li and group (2016) have reported a novel, catalyst-free, one-pot three-component approach for the efficient synthesis of S-vinyl dithiocarbamate derivatives through the reaction of electron-deficient allenes, various primary and secondary amines, and carbon disulfide in dichloromethane under catalyst-free conditions at room temperature within 10–30 minutes to produce the corresponding products in excellent yields ranging from 76–82% (product 23; Scheme 19(a)). A broad substrate scope was demonstrated using various cyclic and acyclic amines, such as benzylamines, heteroaryl-substituted amines, with differently substituted electron-deficient allenes, producing the corresponding products with excellent regioselectivity and stereoselectivity. To understand the mechanism of this transformation, several controlled reactions and NOESY analysis was performed, which suggested that the reaction proceeds via initial formation of a dithiocarbamate anion from the amine and CS2, followed by regioselective Michael-type nucleophilic addition to the central carbon atom of the electron-deficient allene, resulting in the formation of an allylic intermediate, followed by the proton transfer to furnish the thermodynamically favored S-vinyl dithiocarbamate (Scheme 19(b)). The methodology offers several significant advantages, including catalyst-free operation, mild room-temperature conditions, exceptionally short reaction times, high product yields, excellent regio- and stereoselectivity, with broad substrate scope and good tolerance to different functionalities. However, the reaction is mainly limited to electron-deficient allenes and requires dichloromethane as solvent, which diminishes its environmental friendliness.64 (a) The schematic representation of the reactions of amines, carbon disulfide, with allenes, leading to the formation of S-vinyl dithiocarbamate derivatives and (b) a plausible mechanism for the formation of S-vinyl dithiocarbamates. For the very first time, Shabanian and his group (2019) have developed a simple, convenient and catalyst-free protocol for the conjugate additions of dithiocarbamic acid salts to ortho-quinone methides (o-QMs) to prepare the corresponding dithiocarbamate derivatives (products 24–26; Scheme 20). Firstly, the (o-QMs) were synthesized via the reaction of quinone-like moieties with formaldehyde by the Knoevenagel condensation, which then undergoes a 1,4-Michael-type addition with dithiocarbamic acid salts (prepared in a separate vessel by the reaction of secondary amines and carbon disulfide) in water at room temperature (Scheme 21). The products were obtained within 4–8 h in moderate to good yields (70–95%). The advantages of the proposed method include the use of water as a green solvent, its mild reaction conditions, and a straightforward procedure. In addition, the method avoids the use of oxidants and harsh conditions, making it environmentally friendly and operationally simple, and also the products were isolated very easily by a simple filtration procedure. However, the use of primary amines such as propyl amine, cyclohexylamine, and benzylamine, under the similar reaction conditions produced the undesired dimer adduct, dicoumarol (A), as major product (product 27; Scheme 20). This clearly indicates that this protocol is not suitable for the conversion of the primary amines, which serves as a major drawback.65 Catalyst-free synthesis of dithiocarbamate derivatives using secondary amines, carbon disulfide, and o-quinone methides under catalyst-free conditions, and formation of coumarol by employing benzyl amine, a primary amine, under similar conditions. A plausible mechanism for the production of dithiocarbamate derivatives via the formation of o-quinone methides as an intermediate. In continuation of his efforts for developing the green methodologies for the synthesis of dithiocarbamate derivatives, once again, Saha and his co-workers (2022) have developed an efficient, metal-free, one-pot two-step protocol for the direct and stereoselective synthesis of trans-styrenyl dithiocarbamate derivatives from readily available styrenes. The reactions were carried out using various primary and secondary amines with styrenes using molecular bromine as a catalyst in the presence of triethylamine as a base at 65 °C in MeCN, to afford the desired products in good to excellent yields (74–88%) within approximately 3 h (product 28; Scheme 22(a)). A broad substrate scope was demonstrated using various electron-donating and halogen substituents bearing styrenes, along with a diverse range of cyclic and acyclic secondary amines, leading to the formation of trans-styrenyl dithiocarbamates with excellent stereoselectivity. The mechanistic studies suggest that initially, styrenes were brominated to form(1,2-dibromoethyl)benzene (I), which then undergoes a nucleophilic addition at the less hindered carbon atom by in situ generated dithiocarbamate anions (from amines and carbon disulfide), leading to the formation of (II). Now, in the presence of base, HBr gets eliminated to form the final product (III) (Scheme 22(b)). The isolation and characterization of both the intermediates, i.e., dibromide intermediate (I) and the substitution intermediate (II) provided strong experimental support for the proposed reaction pathway. The major advantages of this methodology include metal-free conditions, operational simplicity, easy availability of starting materials, good yields, high stereoselectivity, broad substrate scope, and avoidance of expensive transition-metal catalysts. However, nitro-substituted styrenes failed to transform efficiently and produced unidentified side products along with dithiocarbamate dimers, which are the major limitation of the protocol.66 (a) Synthesis of trans-styrenyl dithiocarbamate derivatives by the reaction of styrenes, molecular bromine, and dithiocarbamate derivatives under basic conditions and; (b) a plausible mechanism showing the formation of the desired products via nucleophilic attack of in situ generated dithiocarbamate ions to (1,2-dibromoethyl)benzene with elimination of HBr. Jahan and his research group (2023) have devised a simple, efficient, and unique methodology for the synthesis of bioactive dithiocarbamate derivatives using carbon disulfide, amines, and α,β-unsaturated compounds, using ceric ammonium nitrate (CAN-5 mol%) as a Lewis acid catalyst in a PEG-400: H2O as a recyclable green solvent system at 50 °C to produce the desired products in good to excellent yields (72–96%) within the duration of 2 to 4.5 h (product 29; Scheme 23(a)). Different cyclic and acyclic primary aliphatic amines were employed in this transformation. A plausible mechanism of this transformation has been presented in Scheme 23(b). The solvent remained effective over five consecutive cycles without any significant loss of activity, which represents a notable advantage of the present protocol. The advantages of the proposed protocol include an eco-friendly nature, cost-effectiveness, simple purification, recovery of solvent, and an easy procedure. Furthermore, the minimal catalyst loading, clean reaction profile, and reduced generation of chemical waste offer significant potential for the development of a diversity-oriented library of dithiocarbamate derivatives in accordance with the principles of green chemistry.67 (a) Ceric ammonium nitrate employed synthesis of dithiocarbamate derivatives under acidic conditions; (b) the detailed mechanism showing the reaction between amine and carbon disulfide with activated alkenes by 1,4-conjugate additions. Synthesis of dithiocarbamate derivatives by using alkyl/aryl halides as electrophile The three-component reaction of amines, carbon disulfide and alkyl/aryl haildes is one of the most common approach for the synthesis of various functionalized dithiocarbamate derivatives, due to availability and inexpensiveness of alkyl/aryl halide moieties. In this regard and Cai and his group (1998) developed a simple and efficient one-pot protocol for the synthesis of dithiocarbamates via the reaction of primary or secondary amines, such as benzyl amine, α-benzoylpiperazine, 1-methylpiperazine, etc. with carbon disulfide, and a variety of alkyl halides in the presence of anhydrous potassium phosphate (K3PO4) as a mild base in acetone at 10 °C to room temperature, affording good to excellent yields (typically 72–94%) of the corresponding dithiocarbamate derivatives within 2 h (product 30; Scheme 24). The advantages of the proposed method include mild reaction conditions, use of a relatively inexpensive and non-strong base, simple one-pot procedure, and efficient and straightforward workup procedure. However, the use of acetone as a solvent and column chromatography for purification may limit large-scale applications. Moreover, some reactions, such as the reaction of 2-chloroethan-1-ol with 1-methylpiperazine, as well as the reaction of benzyl amine with benzyl chloride, gave comparatively low yields, which is a major drawback of the present methodology.68 Synthesis of dithiocarbamate derivatives using K3PO4 as a base by Cai et al.68 Saidi et al. (2006) reported a straightforward and highly efficient, one-pot three-component method for the synthesis of dithiocarbamates through the reaction of amines, carbon disulfide, and alkyl halides, under catalyst-, and solvent-free reaction conditions to produce the corresponding S-alkyl dithiocarbamate derivatives in good to high yields (68–98%) at room temperature (product 31; Scheme 25). The scope and limitation of this simple process were explored by using a wide range of alkyl halides and amines. Primary, allylic, benzylic, hindered, and unhindered secondary and tertiary alkyl primary amines were used in this protocol. The reactions were completed after 8–14 h, affording 68–97% yields. The major advantages of this method include a simple and green procedure, which involves mild reaction conditions with the potential for large-scale production. Moreover, it avoids hazardous organic solvents and toxic catalysts and gives nearly quantitative yields without any byproducts in most cases. However, the substrate scope was limited to aliphatic amines only, while no experiments were reported with aromatic amines.69 One-pot three-component synthesis of dithiocarbamates by Saidi and his group. Ranu et al. (2008) have reported an efficient ionic liquid-catalyzed three-component protocol for the synthesis of symmetrical bis(dithiocarbamate) derivatives through the reaction of various aliphatic amines, carbon disulfide (CS2), and methylene halides using 1-methyl-3-pentylimidazolium bromide ([pmIm]Br), as both catalyst and reaction medium, at room temperature within 20 minutes (product 32; Scheme 26). A wide range of cyclic and acyclic amines were successfully employed, affording the desired dithiocarbamates in excellent yields ranging from 80–85%.51 Synthesis of symmetrical bis(dithiocarbamates) by reaction of amines, CS2, dihalomethane moieties. Ranu and his co-workers (2008) have developed a one-pot, three-component protocol for the synthesis of S-aryl and S-vinyl dithiocarbamate derivatives from secondary amines, such as dimethylamine, diethylamine, pyrrolidine, piperidine, and morpholine, etc., with carbon disulfide, and aryl iodides or styrenyl bromides in water, using copper nanoparticles as catalysts. The reaction proceeded under ligand- and base-free conditions and afforded the desired products in high yields (75–95%) (product 33; Scheme 27). Based on the controlled experiments, the authors also suggested a plausible mechanism for the reaction, which initiates with the oxidative addition of aryl iodide to the copper catalyst to form (A), which then reacts with the in situ generated dithiocarbamate anion (B) (by the reaction of amine and carbon disulfide), to form (C). Now the intermediate (C) undergoes reductive elimination to yield the final product (D) with the regeneration of the catalyst (Scheme 28). A notable feature of this methodology was the excellent stereoselectivity observed for vinyl dithiocarbamates, where the stereochemistry of the starting vinyl bromides was retained in the products. The use of water as the reaction medium, and base- and ligand-free conditions, as well as the recyclability of the copper nanoparticle catalyst, further enhanced the environmental friendliness of the protocol; however, no reactions were reported with primary amines.70 Cu-NPs employed in the synthesis of dithiocarbamate derivatives. The detailed mechanistic pathway of the copper-catalyzed protocol by Ranu et al.70 Işcan and group (2010) worked on the synthesis of dithiocarbamate derivatives by the reaction of potassium salt of various secondary amines with various electrophiles, such as 2-(chloroacetyl)aminothiazole, diphenylmethylamine, and 9-fuorenylamine, etc., in acetone at room temperature to synthesize the corresponding product in moderate to good yields (60–85%) within 4 h (product 34; Scheme 29). The formation of the products was confirmed by using FT-IR, 1H NMR spectroscopy, and mass spectrometry. The antimicrobial activity of dithiocarabamate compounds was also examined.71 Catalyst-free production of dithiocarbamate derivatives suggested by Işcan et al.71 Saidi and coworkers (2010) developed a versatile and efficient methodology for the large-scale synthesis of functional dithiocarbamate derivatives by one-pot reaction of amines, CS2, and methyl bromo acetate in pure water, which serves both as a solvent and catalyst at room temperature (product 35; Scheme 30). The desired products were obtained within 8–14 h with high purity and in excellent yield. Use of water as a catalyst and solvent, an experimentally simple reaction procedure, with no by-products in most cases were several advantages of this methodology. Moreover, this method offered a multi-gram scale under operationally simple and safe conditions. However, when 1-phenylethylamine was used, a diastereomeric mixture of products was obtained, reflecting that the method is ineffective to produce the desired product as a sole product with optically active amines, which is a major drawback.72 Synthesis of functional dithiocarbamate moieties by Saidi et al. In 2011, Nayeri et al. introduced an efficient, ultrasound-assisted, and environmentally benign one-pot protocol for the synthesis of dithiocarbamate derivatives through the reaction of amines, carbon disulfide (CS2), and alkyl halides (product 36; Scheme 31). The methodology afforded the corresponding products in moderate to excellent yields (64–90%). Notably, the protocol is catalyst-free, cost-effective, and highly selective, offering significant economic and environmental advantages that render it an attractive and sustainable synthetic approach. Nevertheless, the methodology was not extended to the synthesis of N-aryl dithiocarbamate derivatives, thereby limiting its substrate scope.58 Ultrasound irradiation assisted synthesis of dithiocarbamate derivatives. Azizi and co-workers (2012) reported an efficient, catalyst-free, and environmentally benign one-pot strategy for the synthesis of dithiocarbamate derivatives via the three-component coupling of amines, carbon disulfide (CS2), and alkyl halides in deep eutectic solvent (choline chloride–urea) or polyethylene glycol (PEG) at ambient temperature (product 37; Scheme 32). The protocol furnished the desired dithiocarbamate derivatives in excellent yields (68–95%) within 200 min. A diverse range of primary, secondary, and sterically hindered amines, together with various alkyl halides, were efficiently transformed, highlighting the broad substrate scope and functional group compatibility of the methodology. Furthermore, the process was readily applicable to gram-scale synthesis, and the green solvent system could be recycled repeatedly with only a marginal decrease in efficiency. The operational simplicity, catalyst-free conditions, use of recyclable and environmentally benign solvents, mild reaction conditions, short reaction times, and high product yields collectively underscore the sustainability and practical utility of this protocol. Nevertheless, its dependence on DES or PEG as the reaction medium and the gradual reduction in product yields after successive solvent recycling constitute minor limitations of the methodology.53 Three-component reaction of amines, carbon disulfide, and alkyl/aryl halides by Azizi et al. Safa and his coworkers (2014) have developed a straightforward, highly efficient, and one-pot methodology for the synthesis of various dithiocarbamate-based organosilane compounds under basic conditions (product 37.1; Scheme 33). Firstly, the reaction of 4-hydroxybenzaldehyde (I) with 1,3-dibromopropane or 1,4-dibromo-butane (II) was performed in dry DMF under basic conditions using K2CO3, which produced 4-(3-bromopropoxy)benzaldehyde or 4-(4-bromobutoxy)benzaldehyde (III), respectively. Now, these benzaldehydes were further reacted with carbon disulfide and amines at 0 °C for a few minutes to yield 4-(4-formylphenoxy)butyl dialkylcarbamodithioate or 3-(4-formylphenoxy)propyl dialkylcarbamodithioate (IV). These dithiocarbamate derivatives were then reacted with ris(trimethylsilyl)methyllithium in THF at room temperature under argon atmosphere to produce the corresponding dithiocarbamate-based organosilane compounds (V) in excellent yields (91–93%), these overall transformation has been presented in Scheme 34. This protocol offered a few advantages including the simple operational procedure, easy accessibility of reactants, mild reaction conditions, and high yields of the desired products.73 Synthesis of dithiocarbamate-based organosilane compounds under basic conditions. Synthesis of dithiocarbamate-based organosilane compounds under basic conditions, with the plausible mechanism. Jyostna (2015) and his colleagues have synthesized a series of novel 4-aminoantipyrine-containing dithiocarbamate derivatives via the reaction of 4-aminoantipyrine, carbon disulfide, and various alkyl/aryl halides using potassium carbonate as a base in DMF (product 38; Scheme 35). The synthesized compounds were characterized by IR, 1H NMR, and mass spectrometric analysis. Further, the authors have performed the screening for their antimicrobial activities and found moderately promising activities against Gram-positive bacteria as compared to Gram-negative bacteria. Some of the synthesized products, which contained a branched-alkyl group and a benzyl group, showed potential antibacterial activities against B. subtilis. Moreover, molecular docking was also performed, which revealed that the hydrophobic interactions were important for the antimicrobial studies.74 A novel methodology for the preparation of 4-aminoantipyrene-based dithiocarbamate derivatives under basic conditions, suggested by Jyostna et al.74 Raghuvanshi (2015) developed a mild, efficient, rapid, and one-pot protocol for the synthesis of methyl N-aryl dithiocarbamates via thiocarbamation of anilines using carbon disulfide and methyl iodide in the presence of in situ generated superoxide ion (KO2/18-crown-6) in DMF at room temperature, affording good to excellent yields (65–93%) within a short reaction time of 1–2 h (product 39; Scheme 36). The advantages of the proposed method include mild reaction conditions, high efficiency, and good yields. However, the use of DMSO as a solvent causes chemical instability and side reactions. Moreover, the toxicity of 18-crown-6 is not considered safe for biological and pharmaceutical applications.75 Synthesis of methyl N-aryl dithiocarbamates via thiocarbamation of anilines using in situ generated superoxide ion (KO2/18-crown-6). Pourshojaei and group (2017) obtained dithiocarbamate derivatives from a condensation reaction between primary or secondary amines, carbon disulfide, and alkyl or benzyl halides with H2O/EtOH (1 : 4) at room temperature for 5–24 h (product 40; Scheme 37). Among aliphatic and aromatic amines, the results generally show that reaction of aliphatic amines with alkyl or benzyl halides led to desired products in the highest yields (75–90%). Also, among aliphatic amines, those that reacted with benzyl halides showed better yields than those that reacted with alkyl halides. Use of environmentally benign solvents is one of the advantages of this procedure. Also, obtaining products in good yield via catalyst-free reaction using a facile, inexpensive, and practical approach can be considered another advantage of this procedure. Target products are very important compounds, because their analogs have been applied in the pharmaceutical, chemical, and rubber industries.76 Catalyst-free synthesis of S-aryl or S-benzyl dithiocarbamate derivatives by Pourshojaei et al.76 Chaturvedi and his co-workers (2017) have developed a novel, efficient, and solvent-free one-pot protocol for the synthesis of dithiocarbamate derivatives via the reaction of amines, carbon disulfide, and alkyl halides using benzyl trimethyl ammonium hydroxide (Triton-B) as a phase-transfer catalyst at room temperature for about 1.5–2.5 h, affording high yields (82–98%) of the desired products (product 41; Scheme 38(a)). The authors have also proposed the plausible mechanism of the transformation (Scheme 38(b)), in which, firstly, the amine and carbon disulfide reacted together in the presence of Triton-B to form monoalkylammonium alkyldithiocarbamate ion (MAAADC), which then attacks the electrophilic carbon of the alkyl halide, resulting in the formation of the desired products. The advantages of this method are that it exhibits substrate versatility, mild reaction conditions, and experimental convenience. However, this reaction could not be successful for the dithiocarbamates synthesized from tertiary amines. Also, this reaction works well with primary alkyl halides in comparison to secondary and tertiary alkyl halides, which serves as a major drawback.77 (a) Schematic representation of the reaction of amines, carbon disulfide, and alkyl halides for the production of dithiocarbamate derivatives using Triton-B as a phase-transfer catalyst, and (b) a plausible mechanism happening by the nucleophilic attack of dithiocarbamate ion to alkyl halide. Dey and his research group (2022) have reported a direct, metal-free approach for the synthesis of aryldithiocarbamate derivatives in good yields (77–86%) under the catalyst-free conditions via the reaction of secondary amines, carbon disulfide, and activated aryl halides in DMF at room temperature (product 42; Scheme 39(a)). The reaction proceeded via aromatic nucleophilic substitution between in situ-generated dithiocarbamate anions and activated aryl halides, leading to the formation of the final products (Scheme 39(b)). The present methodology tolerated a variety of functional groups, including nitro, aldehyde, ketone, bromine, and chlorine substituents, and eliminated the need for transition metals, strong bases, or elevated temperatures, which are the key advantages; however, the use of DMF as the reaction medium raises environmental issues, which is a major limitation.78 (a) Catalyst-free synthesis of aryldithiocarbamate derivatives and (b) proposed mechanism by Dey et al.78 In 2023, Jahan and co-workers reported a straightforward, efficient, and environmentally benign protocol for the synthesis of biologically relevant dithiocarbamate derivatives via a three-component reaction of carbon disulfide, amines, and alkyl halides. The transformation was catalyzed by 5 mol% ceric ammonium nitrate (CAN) in a recyclable PEG-400/H2O solvent system at 50 °C, affording the corresponding products in good to excellent yields (81–96%) within 2–4.5 h (product 43; Scheme 40(a)). A broad range of cyclic and acyclic primary aliphatic amines was successfully accommodated, highlighting the versatility of the methodology. A plausible reaction mechanism has been proposed and is depicted in Scheme 40(b). Notably, the PEG-400/H2O solvent system could be recycled for up to five consecutive runs without any appreciable decline in catalytic efficiency. The protocol offers several advantages, including operational simplicity, facile product isolation, solvent recyclability, cost-effectiveness, and environmental sustainability. Moreover, the low catalyst loading, high reaction efficiency, clean reaction profile, and minimal generation of chemical waste make this strategy a valuable and green approach for the diversity-oriented synthesis of dithiocarbamate derivatives in accordance with the principles of sustainable chemistry.67 (a) Ceric ammonium nitrate employed synthesis of dithiocarbamate derivatives under acidic conditions; (b) the detailed mechanism showing the reaction between amine and carbon disulfide with alkyl halides by nucleophilic substitution. Pratheepkumar and his research group (2025) have developed an efficient and environmentally friendly protocol for the one-pot synthesis of S-aryl dithiocarbamate derivatives via the Cu2O-catalyzed intermolecular C–S cross-coupling reaction of secondary amines with carbon disulfide and aryl iodides in the presence of triethylamine as a base in aqueous medium at 80 °C within the duration of 12 h, to produce the good to moderate yields (42–80%) of the desired products (product 44; Scheme 41(a)). Scope of the reaction was widely explored using various aryl iodide derivatives with different electron-withdrawing substituents, such as, trifluoro methyl at the meta-position, and electron donating substituents, such as OMe, Me, etc. at the para-position, leading in the desired products as a sole product in good yields. The effect of the oxidation state of copper, present in the catalyst, was also examined by performing a set of separate reactions, using CuO and Cu powder as catalyst, in which Cu was present in +1, and 0 oxidation states, respectively; however, in both of the cases, the yield of the products were lower (75%, and 60%, respectively) than the Cu2O, suggesting that Cu with +1 oxidation state is the most efficient. By this observation, and a few controlled experiments, the plausible mechanism of this transformation was also proposed, which is presented in Scheme 41(b), where the reaction was initiated with the oxidative addition of aryl iodide to Cu(i) catalyst to form (A), which then undergoes ligand exchange with in situ generated dithiocarbamate anion (by the reaction of amine and carbon disulfide) to form the intermediate (B). Finally, the reductive elimination of intermediate (B) leads to the formation of the final product (C) with regeneration of Cu(i) species, and the catalytic cycle goes on. Additionally, a few reactions, such as nitration, preparation of 2-aminobenzole, etc., have been performed for the functionalization of several synthesized compounds, presented in Scheme 42. The advantages of the proposed method include the use of water as a green solvent, relatively mild reaction conditions, and an efficient copper(i)-catalyzed coupling strategy. However, using a base (triethylamine), and inefficiency to form the products starting from aromatic amines are several major drawbacks of this methodology.79 (a) Cu2O-catalyzed synthesis of dithiocarbamate derivatives, and (b) representation of the plausible mechanism of the reaction between amines, carbon disulfide, and aryl amines in the presence of triethyl amine. Functionalization of prepared dithiocarbamate derivatives. Li et al. (2026) have synthesized three nitrogen-containing novel heterocyclic alkyl dithiocarbamate derivatives (Py-2-DBDTC, PDM-DBDTC, and BZT-DBDTC) by the reaction of butylamine, carbon disulfide, and heterocyclic alkyl halide in a basic medium using NaOH, in THF at 80 °C within 18 h (products 45–47; Scheme 43). The prepared compounds were found as ashless, phosphorus-free multifunctional lubricant additives, which on examination showed great thermal stability and oxidation resistance. The tribological properties of these additives were also studied, which revealed that they possessed extreme pressure properties with remarkable anti-wear and friction-reducing effects under various operating conditions.80 Synthesis of a few novel alkyl dithiocarbamate derivatives by Li et al. Using phenylboronic acids as electrophiles A few reports are also available for the synthesis of dithiocarbamate derivatives using aryl boronic acids as electrophile. In this regard, Naveen and his coworkers (2025) have reported a copper-mediated, one-pot three-component strategy for the synthesis of S-aryl dithiocarbamate derivatives through C(sp2)–S coupling of aliphatic amines, carbon disulfide, and phenylboronic acids (product 48; Scheme 44(a)). The reaction was carried out under mild conditions using different copper catalysts, such as CuCl and CuBr, Cu(OAc)2·H2O, etc., where Cu(OAc)2·H2O was found as efficient catalyst in MeCN at 60 °C; the substrate scope of the reaction was well explored using various electron-donating and electron-withdrawing functionalities, such as hydroxy, methoxy, halo, etc. at different positions of phenylboronic acid, to produce the desired products in good to excellent yields (68 to 98%) within an hour. Moreover, polyaromatic boronic acids, such as 1-naphthalene- and 2-naphthalene boronic acids as well as heteroaryl boronic acids, such as thiophene-3-boronic acid, 1-thianthreyl boronic acids, were also successfully produced the desired products. The mechanism of the transformation has been presented in Scheme 44(b). The major advantages of this approach were its mild and ambient conditions without requiring a base or additional additive. Moreover, the method was cost-effective and scalable. However, aromatic amine, i.e., N-methylaniline, produced low yields compared to the aliphatic amines.81 (a) Copper acetate-catalyzed reaction of amines and carbon disulfide with aryl boronic acids, and (b) the detailed catalytic cycle for the synthesis of dithiocarbamate derivatives by Naveen et al.81 Tetraalkylthiuram disulfide-employed synthesis of dithiocarbamate derivatives Tetraalkylthiuram disulfide(TATD) is a one of the most useful reagent, which provide the dithiocarbamate anion directly after the cleavage of S–S bond; thus, many reports have been reported for the synthesis of dithiocarbamate derivatives using TATD. In this regard, Dong and co-workers (2017) have developed a copper-catalyzed, efficient, and convenient protocol for the simultaneous synthesis of two kinds of S-aryl dithiocarbamate derivatives without any clear selectivity. The products were formed via S-arylation of tetraalkylthiuram disulfides using diaryliodonium salts in the presence of CuI (30 mol%) as a catalyst and KOtBu (2 equiv.) as a base in DMF at 110 °C within 4–6 h to produce the good to excellent yields (73–87%) of each of the desired products (products 49–50; Scheme 45). A plausible mechanism of this transformation, presented in Scheme 46, was also suggested by the authors, which starts with the reaction of diaryliodonium triflate (1) with CuI (A), resulting in the formation of (B) (via oxidative addition), and aryl iodide (E). Now, tetraalkylthiuram disulfide (2) and (B) form a coordinated complex (C). In the presence of the base, i.e., KOtBu, the complex (C) dissociates into the intermediate and the potassium salt (G), which then undergoes reductive elimination to yield the final product 3, with copper(i) species. Simultaneously, A and E undergo a similar oxidative addition to produce F, followed by the process of transmetalation to produce the intermediate H, and another reductive elimination happens to form the other main product 3′, with regeneration of the catalyst A. This method has the advantages of efficiency, good atom economy, and broad substrate scope. However, the use of diaryliodonium salts, which are less commonly available and may require prior synthesis, can limit practicality. Moreover, formation of two products without clear selectivity may complicate purification and reduce overall efficiency in certain cases.82 Selective synthesis of S-aryl dithiocarbamate derivatives employing cuprous iodide as a catalyst under basic conditions. The detailed mechanism for the preparation of dithiocarbamate derivatives by the reaction of amines and CS2 with diaryliodonium salts. Bolm and his research group (2017) have developed an efficient, copper-catalyzed C(sp2)–S coupling protocol for the synthesis of S-aryl dithiocarbamate derivatives using aryl iodides and tetraalkylthiuram disulfides in the presence of Cu2O (5 mol%) as a catalyst, and Cs2CO3 as a base (2 equiv.) in DMSO at 80 °C for 18 h to yield the moderate to excellent yields (69–96%) of the desired products (product 51; Scheme 47(a)). Based on a few experiments, two plausible mechanisms of the transformation were proposed, which are presented in Scheme 47(b and c). In the first one (Scheme 47(b)), presented in the left half, firstly the intermediate A forms by oxidative addition of a copper species into the aryl-iodine bond of aryl iodide (3), followed by the formation of nucleophile B, from the thiuram reagent in the presence of base, and support of the metal ion, probably. Next, the intermediate C forms by the ligand exchange of B by the ligand exchange of A. Finally, reductive elimination of C produces the product 2, with completion of the catalytic cycle with regeneration of the copper catalyst in its initial oxidation state. Whilst in the second mechanism (Scheme 47(c)), presented in the right half, the aryl iodide reacts with the catalyst to form aryl radical D, which then reacts with thiuram reagent 1 to form the desired product 2, finally, by S–S bond cleavage. The advantages of the proposed method include the use of inexpensive and environmentally benign thiuram disulfides and a broad substrate scope, rendering this new approach synthetically attractive for the preparation of potentially biologically active compounds. In addition, the protocol avoids any additional ligand and demonstrates good scalability, confirming the practicability of the process. However, the use of DMSO as a solvent and strong base (Cs2CO3) are the major limitations.83 (a) Cuprous oxide-catalyzed synthesis of dithiocarbamate derivatives by the reaction of tetraalkylthiuram disulfides and aryl iodides, and (b) and (c) two plausible mechanisms for the formation of dithiocarbamate derivatives using Cu2O as a catalyst under the basic medium. Zhao and co-workers (2018) have developed a straightforward, mild, and efficient protocol for the synthesis of benzyl dithiocarbamates via base-promoted cross-coupling of benzyl chlorides with tetraalkylthiuram disulfides using Cs2CO3 as base in DMSO at room temperature for 24 h, affording good to excellent yields (25–91%) of the desired products (product 52; Scheme 48(a)). The mechanism involves reaction of thiuram reagent with Cs2CO3 and forms cesium salt of dithiocarbamate followed by nucleophilic substitution with alkyl chlorides generating the desired benzyl dithiocarbamates (Scheme 48(b)). The advantages of the proposed method include mild reaction conditions, use of readily available starting materials. Moreover, the authors have performed the reaction in gram scale, which produced good yields (81%) of the desired products within the same duration. In addition, the protocol demonstrates good functional group compatibility. However, the requirement of DMSO as solvent, relatively longer reaction time, and dependence on strong base may present certain limitations, particularly in terms of environmental impact and reaction practicality.84 (a) Synthesis of dithiocarbamate derivatives by the reaction of tetraalkylthiuram disulfides with aryl chlorides under the basic conditions, and (b) a plausible mechanism of the transformation showing the nucleophilic attack of cesium salt of dithiocarbamic acid to aryl chloride. Zhao and his co-workers (2019) have proposed copper-catalyzed, highly regioselective, efficient, and straightforward protocol for the synthesis of sulfonyl-containing benzyl dithiocarbamates via thiosulfonylation of styrenes using tetraalkylthiuram disulfides and sulfonyl chlorides (product 53; Scheme 49). The reaction proceeds under relatively simple conditions using Cu(OAc)2 as a catalyst in 1,4-dioxane at 100 °C for 12 h and enables the simultaneous introduction of both sulfonyl and dithiocarbamate functionalities in a single step with good to excellent yields (46–85%). Moreover, the plausible mechanism of the reaction was also proposed by the authors by performing computational studies, which are presented in the Scheme 50. The advantages include that this method proceeds without addition of any ligands or bases and exhibits broad substrate scope and excellent functional group compatibility, which make this transformation valuable from the view of the synthesis. However, the requirement elevated temperature, and 1,4-dioxane as organic solvent reduces its environmental friendliness compared to greener methodologies.85 Copper acetate-catalyzed synthesis of dithiocarbamate derivatives by Zhao et al.85 The detailed mechanistic pathway for the copper-catalyzed synthesis of dithiocarbamate derivatives by the reaction of styrenes, tetraalkylthiuram disulfides and sulfonyl chlorides. Yan et al. (2019) have developed an efficient and environmentally benign, copper-catalyzed protocol for the synthesis of S-aryl dithiocarbamate derivatives via the cross-coupling of aryl iodides with tetraalkylthiuram disulfides using Cu(acac)2 (10 mol%) as a catalyst, Na2CO3 as a base, and n-Bu4NBr as an additive in water at 100 °C for 12 h, affording moderate to good yields (52–84%) of the desired products (product 54; Scheme 51(a)). Based on several controlled experiments, a plausible mechanism has been proposed by the authors, which has been represented in Scheme 51(b). The reaction starts with the conversion of tetraalkylthiuram disulfide into dithiocarbamate anion and Cu(i) intermediate (A) along with CuX2, in the presence of base and by the support of the metal probably. Next, the intermediate (A) undergoes oxidative addition with aryl iodide, leading to the formation of Cu(iii)(Ar)I intermediate (B). Now, the nucleophilic substitution of dithiocarbamate anion with intermediate (B) results into formation of ArSCu(iii)Ar, another intermediate (C). Finally, a reductive elimination occurs with the formation of the final product as well as the regeneration of (A). The advantages of the proposed method include the use of water as a green solvent, absence of additional ligands, and relatively simple reaction conditions with good functional group tolerance (halogens, methyl, methoxy, etc.), compatibility with heteroaryl substrates, and provides a practical approach for synthesizing S-aryl dithiocarbamates. However, the use of tetrabutylammonium bromide as an additive is the major drawback of this methodology, due to environmental concerns.86 (a) Reaction of iodobenzenes with tetraalkylthiuram disulfides employing Cu(acac)2 as catalyst and n-Bu4NBr as an additive under basic conditions, and (b) the plausible mechanism of copper catalyzed synthesis of dithiocarbamate derivatives. Zhang et al. (2022) have developed an efficient copper-catalyzed methodology for the synthesis of alkenyl dithiocarbamate derivatives via direct C(sp2)–H sulfuration of aryl alkenes using tetraalkylthiuram disulfides (TATDs) as the dithiocarbamate source (product 55; Scheme 52(a)). The reaction is carried out using Cu(OTf)2 as the catalyst and PPh3 as an additive in chlorobenzene under aerobic conditions at 120 °C for 24 h, affording the desired products from poor to good yields (27–72%). The controlled experiments revealed that the reaction proceeds through a radical mechanism, which starts from the homolysis of tetraalkylthiuram disulfide (2a) to form the radical (A), which subsequently reacts with the alkene (1a), resulting in the formation of radical B. Now, in the presence of Cu(ii), B undergoes oxidation to produce C, which, on deprotonation, yields the final product (3a) (Scheme 52(b)). Cu(ii) is regenerated from Cu(i) in the presence of oxygen. The protocol demonstrates a broad substrate scope, tolerating various electron-donating and electron-withdrawing substituents within styrenes at different o, m, and p-positions. The advantages of this method include direct C–H functionalization, use of readily available and inexpensive TATDs, and applicability to a range of substrates, making it a valuable strategy for dithiocarbamate synthesis. However, the poor yields of several derivatives are the major limitations.87 (a) Copper triflate-catalyzed synthesis of dithiocarbamate derivatives employing PPh3 as an additive, and (b) a plausible mechanism of the reaction between tetraalkylthiuram disulfide and aryl alkenes via the formation of a radical intermediate. Photocatalytic methodologies for the synthesis of various functionalized dithiocarbamate derivatives Among various methodologies, which relies on using a phtocatalyst or visible-light irradiation for the synthesis of dithiocarbamate derivatives, Yang and co-workers (2019) reported a simple, sustainable, and visible-light-assisted methodology for the synthesis of S-aryl dithiocarbamate derivatives using a one-pot multicomponent reaction of amines, carbon disulfide, and aryl halides. The reaction was promoted by a 23 W CFL under catalyst-free conditions using cesium carbonate as a base in DMSO at room temperature. The desired products were obtained in poor to good yields (product 56; Scheme 53(a)). Moreover, by performing several control experiments, the mechanism of the transformation was also proposed to proceed via the formation of a radical intermediate (Scheme 53(b)). This protocol provided a greener alternative to the transition metal-catalyzed strategies by avoiding the excessive use of expensive and toxic metal catalysts. Though different aliphatic amines reacted well under the optimized reaction conditions with good functional group tolerance, when the reaction was performed using p-toluidine, carbon disulfide, and 4-iodoacetophenone, the corresponding thiourea was obtained in excellent yield (92%), without forming the corresponding dithiocarbamate compound. This observation clearly indicated that this protocol failed to produce N-aryl dithiocarbamate moieties. Moreover, no product was formed when various aryl chlorides were employed. Collectively, these serve a major drawback of the methodology.88 (a) A visible-light induced synthesis of dithiocarbamate derivatives by the reaction of secondary amines, carbon disulfide, and aryl halides, and (b) the detailed mechanistic pathway showing the visible light-promoted transformation of amines, carbon disulfide, and aryl halides into dithiocarbamate derivatives under basic conditions. Li et al. (2022) have developed a novel, eco-friendly, efficient, and visible-light-induced, three-component protocol for the synthesis of S-alkyl dithiocarbamate derivatives from Katritzky salts, carbon disulfide, and various secondary amines. The reactions were carried out under irradiation with a 10 W blue LED (455 nm) in water using Et3N as a base at room temperature under photocatalyst-and transition metal-free conditions to afford the desired S-alkyl dithiocarbamates in moderate to good yields ranging from 55–90% within 24 h (product 57; Scheme 54). A broad substrate scope was explored, including various amino acid-derived and benzylamine-derived Katritzky salts, as well as aromatic and aliphatic secondary amines, while primary amines were found to be incompatible under the optimized conditions. The methodology exhibited excellent functional-group tolerance toward different electron-donating, and electron-withdrawing functionalities, such as ester, methoxy, methyl, halo (Br and Cl), and other substituents. Moreover, the gram-scale synthesis with a 79% yield was also achieved. Mechanistic studies suggested the formation of an electron donor–acceptor (EDA) complex (B), formed between the in situ generated dithiocarbamate anion (A) and the Katritzky salt (1). Upon visible-light irradiation, single-electron transfer (SET) generates alkyl and thiyl radicals (D) and (E), which subsequently undergo radical cross-coupling to furnish the desired product (4), with formation of triarylpyridine (G) as a by-product (Scheme 55). The major advantages of this protocol include the use of water as a green solvent, the absence of external photocatalysts or transition metals and mild reaction conditions, leading to high yields of the products with broad substrate scope and good functional-group tolerance. However, the requirement of pre-synthesized Katritzky salts, relatively long reaction times (24 h), formation of triarylpyridines as a by-product in a significant amount, with compatibility with secondary amines only, are the major drawbacks of the present methodology.89 Three-component synthesis of S-alkyl dithiocarbamate derivatives from Katritzky salts, carbon disulfide, and various secondary amines. A detailed mechanism showing the synthesis of S-alkyl dithiocarbamate derivatives through the formation of the radical intermediate. He and his group (2022) developed a straightforward and environmentally benign, metal-free, visible-light-induced method for the construction of S-alkyl dithiocarbamate derivatives with good functional-group tolerance to different electron-donating and electron-withdrawing groups via multi-component reaction of α-diazoesters, amines, and CS2, and THF under solvent-free conditions (product 58; Scheme 56). The reactions were carried out with 3 W blue LEDs using 8-diazabicycloundec-7-ene (DBU) as an additive at room temperature under aerobic conditions within 4–6 h (Scheme 57). Importantly, here THF does not play the role of a solvent; instead participates as a reagent, resulting in its incorporation in the final product in acyclic form. The possibility of other cyclic ethers, such as tetrahydropyran and 1,4-dioxane, was also evaluated, leading to the formation of a mixture of products containing, the four-component product (product 59) and direct dithiocarbamate (product 60); however, when 1,4-dioxane was used as solvent, the direct dithiocarbamate compound (without incorporation of the ether group, product 60) was obtained as major product, in appreciative yields (74%). After this observation, the authors next performed the reaction of α-diazo ester, carbon disulfide, and amines in 1,4-dioxane under the optimized conditions, and the products were obtained as a mixture of products 61 and 62 (Scheme 58); however, the direct dithiocarbamate products were formed in moderate to good yields (43–75%) (product 61; Scheme 58). Moreover, using acyclic ethers, such as diethyl ether and n-butyl ether, resulted in the formation of none of the desired products. The plausible mechanism was also suggested, as presented in Scheme 59. The present methodology uses green reaction conditions, without using any metal as a catalyst; however, the formation of the products as a mixture with poor yields of several products, as well as their tedious separation, are the major limitations.90 Visible-light driven synthesis of dithiocarbamate derivatives with incorporation of tetrahydrofuran. Studies on the effect of different cyclic ethers in the synthesis of dithiocarbamate derivatives. Synthesis of different dithiocarbamate moieties using 1,4-dioxane as reaction media. A detailed plausible mechanism showing the formation of dithiocarbamates under the visible-light conditions. Liu et al. (2026) have developed an efficient and atom-replacing strategy for synthesizing S-aryl dithiocarbamate derivatives via photoinduced denitrogenation and CS2 insertion of aryltriazenes under purple light irradiation by an LED of 10 W, producing the desired products with a yield of (30–81%) at room temperature in CH3CN under aerobic conditions within an hour (product 63; Scheme 60(a)). Based on the controlled experiments, a plausible mechanism of the transformation was also proposed. Firstly, the aryltriazenes react with carbon disulfide to form the intermediate (A), which undergoes homolysis with the evolution of dinitrogen, to produce the thiyl radical (B) and aryl radical (C), which then undergo radical coupling to produce the final product (D) (Scheme 60(b)). The benefit includes the use of aryltriazenes, which serve as versatile organic synthetic building blocks and provide the aryl and amino groups simultaneously. This drawback ultimately leads to low atom economy and a contaminated product.91 (a) Photo-induced synthesis of S-aryl dithiocarbamate derivatives, and (b) the detailed mechanistic pathway showing visible-light-induced catalyst-free synthesis of dithiocarbamate derivatives by Liu et al. Miscellaneous approaches for the synthesis of dithiocarbamate derivatives This section discusses the various multidimensional and uncommon approaches for the synthesis of dithiocarbamate derivatives. In this regard, Ray et al. (2006) have developed a one-pot, four-component Mitsunobu-based protocol for the synthesis of dithiocarbamate derivatives from the corresponding alcohols using carbon disulfide and aliphatic and aromatic amines (product 64; Scheme 61(a)). The products were obtained in good to excellent yields (80–98%) in dry dimethyl sulfoxide (DMSO) at room temperature for 2–3 h. The mechanism of the reaction was also presented, in which the phosphonium ion formed as an intermediate (Scheme 61(b)). The benefits include its high chemoselectivity and the generation of the corresponding products in high yields without direct N-alkylation.92 (a) One-pot multicomponent strategy for the synthesis of dithiocarbamate derivatives and, (b) the plausible mechanism of the Mitsunobu-based reaction leading to the formation of dithiocarbamates by Ray et al. Bao et al. (2007) have proposed a straightforward and convenient methodology for the synthesis of dithiocarbamate derivatives via Ullmann-type coupling reactions of the sodium salt of dithiocarbamic acids with aryl iodides and vinyl bromides, catalyzed by CuI/N,N-dimethylglycine in DMF at 110 °C in good yields (70–95%) (product 65; Scheme 62). Both (E)- and (Z)-vinyl bromides were found suitable for this reaction, giving the desired coupling products; however, the (Z)-vinyl bromides showed higher stereoselectivity. Moreover, the methodology was found efficient with different electron-withdrawing, as well as electron-donating, and even sterically hindered vinyl bromides. Though the starting materials were inexpensive and easily available, collectively providing a major advantage to the present methodology, however, bromobenzene gave only trace amounts of product under the optimized conditions, which reveals the fact that this method is usable only with aryl iodides, but not with different aryl halides, which serves as a major drawback.93 Copper-catalyzed Ullmann-type coupling reaction by Bao and his research group. Tiwari and co-workers (2007) have developed a convenient, chemoselective, and high-yielding one-pot protocol for the synthesis of diverse dithiocarbamate derivatives via the reaction of mercaptans, primary/secondary amines, and bis(benzotriazolyl)methanethione in the presence of DBU/DABCO as a catalyst in anhydrous CH2Cl2 at room temperature within 2–3 h, affording excellent yields (80–95%) of the desired products (product 66; Scheme 63). The advantages of the proposed method include its mild reaction conditions, high yields, and low reaction time, with great chemoselectivity. Moreover, the tolerance to different alkyl, aryl, and heteroaryl substituents in both of the substrates, i.e., amines as well as various thiols, makes this methodology even more useful. However, the use of bis(benzotriazolyl)methanethione, which is not a commonly available reagent, diminishes the practical applicability of this protocol.94 DBU-catalyzed synthesis of dithiocarbamate derivatives in DCM as reaction media. Walcarius and his coworkers (2007) have developed a new procedure for the efficient synthesis of dithiocarbamate derivatives from aminosiloxanes, carbon disulfide, and alkaline hydrides in THF at 0–65 °C for 2 h, under the catalyst-free and basic conditions (product 67; Scheme 64). The influence of different bases, such as K3PO4, MeONa. EtONa, Et3N, t-BuONa, NaH, KH, etc., were studied, and the complete conversion of the starting materials into the desired products was obtained using NaH and KH. The advantages of the protocol include its general applicability to a wide range of aminosiloxanes, leading to the synthesis of mono-, bis-, and tris-dithiocarbamates in good yields (95–99%). Moreover, the prepared compounds were utilized in the preparation of silica-based adsorbents, which then showed a great efficiency in trapping of Hg(ii) species compared to amine-modified silica or commercial resin bearing dithiocarbamate moieties. However, the uncommon starting materials are the major limitations of the present protocol.95 A novel methodology leading to the synthesis of dithiocarbamate derivatives by Walcarius et al.95 Ashouri et al. (2010) developed a highly efficient, mild, green, and one-pot three-component methodology for the synthesis of dithiocarbamate derivatives (products 68–69; Scheme 65) by using the reaction of amines and carbon disulfide with alkyl vinyl ethers via Markovnikov addition reaction with high stereospecificity in water, which plays a dual role both as promoter and solvent. The reaction produced the desired products in excellent yields (88–98%). Though this protocol avoids the use of basic and highly toxic reagents, organic solvents, and catalysts, the extraction of the products with organic solvents from aqueous medium is a disadvantage of the present methodology.96 Green synthesis of dithiocarbamates using amines, carbon disulfide, and alkyl vinyl ethers via Markovnikov addition. Ishihara and group (2010) have developed an efficient methodology for the synthesis of dithiocarbamate and selenothiocarbamate derivatives via the reaction of N,N-dimethylthiocarbamoyl chloride with corresponding thiolates and selenolates, respectively, under the mild conditions in anhydrous THF, typically at low to room temperature under an inert argon atmosphere. This protocol afforded moderate to good yields (65–81%) of S-alkyl and S-aryl dithiocarbamate derivatives (product 70; Scheme 66). The reaction proceeds via the prior generation of thiolate salts from disulfides or thiols using a reducing agent such as LiAlH4 or NaH, followed by nucleophilic substitution of the thiocarbamoyl chloride to furnish the desired products. The advantages of this method include a relatively straightforward synthesis, the availability of starting materials, and its applicability to both sulfur and selenium analogues. However, limitations such as the requirement of moisture-sensitive reagents, use of inert atmosphere, multistep preparation of intermediates (thiolates), and only moderate yields in some cases may restrict its practicality and large-scale application.97 Reaction of N,N-dimethylthiocarbamoyl chloride with corresponding thiolates and selenolates for the synthesis of dithiocarbamates and selenothiocarbamtes, respectively. Another efficient, convenient, and environmentally benign transition metal-free protocol was reported by Ranu et al. (2011) for the synthesis of S-aryl dithiocarbamate derivatives (product 71; Scheme 67(a)) through a one-pot three-component reaction of aryl diazonium tetrafluoroborates, carbon disulfide (CS2), and secondary amines in water at room temperature. The reaction mixture was stirred at 25 °C for 2.5–3.5 h to furnish the corresponding products in high yields ranging from 74–94%. A wide variety of electron-donating and electron-withdrawing substituted aryl diazonium salts, including methoxy, methyl, nitro, acetyl, iodo, and chloro derivatives, as well as cyclic and acyclic amines such as piperidine, morpholine, thiomorpholine, and dimethylamine, were successfully employed. With the help of Hammett correlation studies and UV analysis, the mechanism of the reaction was studied, which suggested that the reaction proceeds through rapid in situ formation of a dithiocarbamate anion, followed by nucleophilic attack on the aryl diazonium salt via an SN2Ar-type pathway, generating a transient intermediate that undergoes nitrogen extrusion to afford the desired S-aryl dithiocarbamate (Scheme 67(b)). The methodology exhibited excellent functional-group tolerance, broad substrate scope, and successful scalability to multigram quantities. The major advantages of this protocol include its metal-free and mild reaction conditions with the use of water as a green reaction medium. However, the protocol requires pre-synthesized aryl diazonium tetrafluoroborates and is mainly limited to aryl rather than alkyl dithiocarbamate synthesis are several limitations of this methodology.98 (a) Eco-friendly synthesis of dithiocarbamate moieties by the reaction of amines, carbon disulfide, and aryl diazonium tetrafluoroborates in aqueous medium, and (b) a plausible mechanism showing the formation of dithiocarbamate derivatives by SN2Ar-type pathway. Bijanzadeh and his group (2011) have developed a novel, efficient, and stereoselective one-pot multicomponent protocol for the synthesis of highly functionalized dithiocarbamates (product 72; Scheme 68(a)) via sequential Ugi/nucleophilic addition reactions using benzaldehyde derivatives, various aliphatic and aromatic primary amines, propiolic acid, isocyanides, secondary amines, and carbon disulfide in methanol at room temperature, affording good to excellent yields (80–95%) of the desired Z-dithiocarbamates within 2–3 h. The proposed mechanism involves the reaction of benzaldehyde and aniline, firstly, to form the imine moiety, which gets protonated by propiolic acid to form the iminium ion. Now, two consecutive nucleophilic attacks, firstly by propiolate anion to isocyanide, and the second by isocyanide to vinylic carbon of iminium ion, lead to the formation of an intermediate (3) by Mumm rearrangement, which then undergoes a nucleophilic attack by in situ generated dithiocarbamate ion to form the intermediate (4). Now, an intramolecular proton shift happens to form the final product (5) (Scheme 68(b)). The advantages include that the products can be easily prepared through a one-pot reaction from readily accessible starting materials and have suitable functional groups for further conversions. The reactions are very clean with good to high yields and are carried out at room temperature. However, although the reaction is efficient, it may not be easily scalable due to its multicomponent nature.99 (a) Highly functionalized synthesis of dithiocarbamate derivatives by Ugi-type multicomponent approach and, (b) the detailed mechanism of the catalyst-free multicomponent synthesis of functionalized dithiocarbamates. Devi and group (2011) have developed a highly efficient, simple, green and one-pot three-component protocol for the synthesis of S-allyl-N-aryl dithiocarbamate derivatives via the reaction of aromatic amines, carbon disulfide, and allyl/crotyl bromides using stannous chloride (SnCl2·2H2O) as a catalyst under solvent-free conditions at room temperature, affording excellent yields (89–95%) of the desired products within the reaction time of 10–30 min (product 73; Scheme 69). The method also shows good substrate scope with good tolerance to various functionalities in both aromatic amines and allylic halides, making it an efficient and practical approach for dithiocarbamate synthesis. The advantages of the proposed method include solvent-free conditions, very short reaction times, high yields, and low catalyst loading. In addition, the protocol is environmentally friendly and operationally simple.100 SnCl2·2H2O employed the synthesis of dithiocarbamate derivatives by Devi et al.100 In continuation of their efforts for developing the green protocol for the synthesis of dithiocarbamate derivatives, once again Ranu et al. (2012) have reported a ruthenium-catalyzed three-component strategy for the regio- and stereoselective synthesis of allylic dithiocarbamates through the coupling of allyl or cinnamyl acetate, amines, and carbon disulfide (CS2) using Ru(acac)3·3H2O as catalyst in water (product 74; Scheme 70(a)). A broad range of allylic acetates, heteroaryl-substituted allylic acetates, and aliphatic allylic acetates, containing electron-donating and electron-withdrawing substituents, as well as cyclic and acyclic secondary amines, were successfully transformed into the corresponding allylic dithiocarbamates within the duration of 8–28 h, affording the desired products in good to excellent yields ranging from 72–96% with exclusive formation of the thermodynamically favored E-isomers. Mechanistic investigations suggested that the reaction proceeds through ruthenium-mediated activation of the allylic alcohol to generate a π-allylruthenium intermediate (A), which undergoes regioselective nucleophilic attack by the in situ generated dithiocarbamate anion to furnish the allylic dithiocarbamate product (B) (Scheme 70(b)). The methodology exhibited excellent regio- and stereoselectivity, broad substrate scope, high atom economy, and remarkable functional-group tolerance with mild reaction conditions, which are the major advantages of the methodology. However, the requirement for a ruthenium catalyst is expensive and hazardous. Moreover, this methodology was found to be ineffective for the conversion of primary and aromatic amines. Collectively, these mainly limit the practical applicability of the protocol.101 (a) Ruthenium-catalyzed one-pot multicomponent strategy for the regio- and stereoselective synthesis of allylic dithiocarbamate derivatives, and (b) the detailed mechanism showing the formation of a π-allylruthenium intermediate (A), as an intermediate. Gonzalez and his research group (2013) have proposed a novel and versatile methodology for the synthesis of both S- and N-functionalized dithiocarbamate derivatives using the reaction of amines and carbon disulfide with cyclic sulfates as electrophilic precursors (products 75–77; Scheme 71). The authors have developed three protocols: (i) Method A, involving the reaction of sodium salt of dithiocarbamic acid with cyclic sulfates in anhydrous methanol under the microwave irradiation; (ii) Method B, a one-pot procedure in which amines, CS2, and cyclic sulfates were reacted at room temperature; and (iii) Method C, a multicomponent protocol employing amines, CS2 and cyclic sulfates under microwave irradiation at the temperature of 35–65 °C using the catalytic amounts of β-cyclodextrin and aqueous NaOH as a base. A broad range of primary and secondary amines, including diethylamine, sec-butylamine, pyrrolidine, and β-alanine methyl ester, as well as carbohydrate-derived cyclic sulfates from xylose and glucose, were successfully utilized. Under Method A, reactions afforded the desired products in excellent yields of 72–99%, and Method B furnished the corresponding dithiocarbamates in 70–99% yields under mild conditions, whilst Method C provided products in 74–96% yields. Mechanistically, the process involves nucleophilic ring opening of highly reactive cyclic sulfates by in situ-generated dithiocarbamate anions, with sugar-derived cyclic sulfates exhibiting remarkable regioselectivity due to preferential attack at the less hindered carbon center. The methodology was further extended to the synthesis of hydroxylated dithiocarbamates through subsequent acidic hydrolysis of the sulfate ester by aqueous sulfuric acid in THF. The major advantages of this protocol include excellent yields of the products with broad substrate scope, and high regioselectivity under the mild reaction conditions using microwave irradiation. Moreover, the incorporation of β-cyclodextrin improved substrate solubility and enhanced product yields in aqueous media. However, some limitations were also associated with this protocol, including prolonged reaction times (up to 24 h) for certain sugar-derived cyclic sulfates under conventional conditions, while a severe reduction in yields was observed in the absence of β-cyclodextrin.102 A diverse strategies for the synthesis of dithiocarbamate derivatives by Gonzalez et al.102 Azizi et al. (2013) proposed a novel, mild, and green protocol for the one-pot, four-component synthesis of chemically and pharmaceutically important dithiocarbamate derivatives in good to excellent yields (60–92%) using different alkyl amines, carbon disulfide, benzaldehyde derivatives, and acetophenone derivatives in the presence of sodium hydroxide as a base in ethanol at room temperature (product 78; Scheme 72). Firstly, acetophenone and aldehyde reacted together in the basic medium in ethanol at room temperature under a nitrogen atmosphere to form the aldol product, followed by the co-addition of carbon disulfide and amine, finally leading to the desired products. The multicomponent synthesis, high efficiency, and mild reaction conditions are several advantages of the present protocol, which make this synthetic strategy attractive. However, the involvement of nitrogen atmosphere and no product formation while using aromatic amines serves as the major drawback.103 Multicomponent synthesis of dithiocarbamate derivatives under green and mild reaction conditions by Azizi et al. Shockravi and coworkers (2013) have developed a simple and eco-friendly, one-pot protocol for the synthesis of symmetrical dithiocarbamate derivatives via the reaction of bis(chloroacetamide) (I) and thione salts in water under catalyst-free conditions at room temperature, affording good to excellent yields (77–92%) of the desired products (product 79; Scheme 73). Firstly, bis(chloroacetamide) (I) derivatives were synthesized by the reaction of diamines, carbon disulfide, and chloroacetyl chloride using triethylamine as a base in acetone. Advantages of the proposed method include the use of water as a green solvent, mild reaction conditions, and a straightforward one-pot procedure. However, the starting materials used are quite uncommon, which draws a major drawback to this protocol.104 Synthesis of dithiocarbamate derivatives by the reaction of bis(chloroacetamide) and thione salts in water. Wei et al. (2014) developed a novel and straightforward method for converting N-benzoyl diarylamines into N,N-diaryldithiocarbamates without using any catalyst under basic conditions (product 80; Scheme 74). The formation of the product was initialized by the deprotonation of the diaryl amines by a strong base, such as dimsyl lithium, n-butyl lithium, or sodium hydride, followed by the treatment with CS2, and precipitated from the reaction mixture to yield the desired DTCs as sodium or lithium salts using THF as a solvent at 0 °C. The products were obtained in trace to good yields (up to 98%). The main advantage of this method is that it enables the synthesis of aromatic dithiocarbamates, which are usually difficult to prepare due to the low nucleophilicity of aromatic amines. However, the poor yield of the products was obtained when the diarylamine was substituted with an electron-withdrawing group.105 Synthesis of N,N-diaryldithiocarbamate derivatives under the catalyst-free conditions. Martens and group (2016) have developed a novel, green, efficient, and one-pot, four-component methodology for the synthesis of dithiocarbamate derivatives in poor to good yields (19–75%) using cyclic imines, carbon disulfide, acid chlorides, and commercially available amines using triethyl amine as a base under the catalyst-free conditions in DCM at 0 °C-room temperature within 20 h (product 81; Scheme 75(a)). Mechanistic studies suggest that firstly, the nitrogen atom of the cyclic imine reacted with the acid chloride moiety to form the amide derivative of cyclic imine (I), which is highly resonance-stable. On the other hand, amine and carbon disulfide reacted together to form dithiocarbamic acid (II), which was converted into its corresponding dithiocarbamate anion in the presence of triethyl amine, which is an active species. Now, it reacts with (I) to form the desired product (III), finally (Scheme 75(b)). Also, it was observed that using 4-nitrobenzoyl chloride resulted in the highest yield (75%). The rapid and facile access to unknown dithiocarbamates by using mild conditions as well as a wide range of usable substrates, from easily available starting materials, are several advantages of the present methodology. However, only moderate yields of the desired products mark a significant limitation from the view of synthesis.106 (a) A four-component methodology for the synthesis of dithiocarbamate derivatives, and (b) the detailed mechanistic pathway for the synthesis of imine-functionalized dithiocarbamate derivatives by Martenes and group. Beier and group (2017) developed a one-pot three-component route for the synthesis of S-trifluoromethyl dithiocarbamate derivatives in poor yields (up to 48%) by the reaction of secondary amines, carbon disulfide, and 1-trifluoromethyl-1,2-benziodoxol-3 (1H)-one (Togni's reagent), in THF at −78 °C within an hour (product 82; Scheme 76(a)). It was observed that benzyl amine, which is a primary amine, produced undesired (isothiocyanatomethyl)benzene in the excellent yields (78%) under the similar reaction conditions Scheme 76(b)). This methodology led to a class of compounds with dithiocarbamate and trifluoromethyl groups in a single structure, which may have potential applications as agrochemicals or in drug design. However, the poor yields of the desired products and formation of undesired products with primary amines are the major limitations of the present methodology.107 (a)Synthesis of dithiocarbamate derivatives using Togni's reagent, and (b) the formation of isocyanate by the employment of primary amines by Beier et al.107 Alam (2018) and the group presented a metal-free, one-pot, and highly attractive, novel route towards the formation of thiocarbamate, and dithiocarbamate derivatives (product 83; Scheme 77(a)), from readily available (thio)alcohols, and potassium thiocyanate in the presence of dodecylbenzenesulfonic acid (DBSA) as a catalyst, under solvent-free and mild reaction conditions to produce the moderate to high yields (61–88%) of the desired products within 12 h. Mechanistic studies suggest that firstly potassium thiocyanate (A) get protonated in the presence of DBSA, to produce thiocyanic acid (B), which again get protonated to form the reactive species (C). Now, this active specie undergoes nucleophilic attack to form the final product (D). It was also observed that, in cases of poor nucleophile, the concentration of thiocyanic acid increases and gets dimerized to form the product (E) (Scheme 77(b)). The advantages include using commercially available, and inexpensive starting materials with simple experimental procedure, however, the methodology was not found suitable for the electron-withdrawing substituents bearing (thio)alcohols, as they formed dimer under the optimized reaction conditions.108 (a) Dodecylbenzenesulfonic acid (DBSA)-catalyzed synthesis of thiocarbamate and dithiocarbamate derivatives by the reaction of potassium isothiocyanate and (thio)alcohols, and (b) the mechanistic pathway showing the formation of the desired (di)thiocarbamate derivatives under acidic conditions. Dong and co-workers (2018) developed an efficient and convenient method for the synthesis of various S-aryl (phenyl) dithiocarbamate derivatives via copper-catalyzed C–S coupling of sodium dialkyl dithiocarbamates with aryl boronic acids using CuBr and 1,10-phenanthroline as ligand in DMF at 80 °C within 4–6 h, affording good to excellent yields (66–94%) of the desired products (product 84; Scheme 78(a)). Mechanistic studies suggest that firstly the catalyst interacts with sodium dialkyldithiocarbamate to generate intermediate A, which then gets oxidized by oxygen in the air to give intermediate B, which instantly undergoes transmetallation with aryl boronic acid, to give intermediate C. Next, C undergoes re-oxidation to produce Cu(iii) intermediate D. Finally, reductive cleavage of D forms the desired product E, with regeneration of the catalyst (Scheme 78(b)). The advantages of this method include easily available starting materials, easy performance, short reaction time, broad substrate scope, and good yields, showing its potential synthetic value for the convenient preparation of some potentially biologically active compounds. However, the use of DMF as a solvent and the requirement of a copper catalyst and ligand are the major limitations.109 (a) CuBr-catalyzed synthesis of dithiocarbamate derivatives, and (b) a plausible mechanism of copper-catalyzed synthesis of dithiocarbamate moieties by the reaction of amines and carbon disulfide with aryl boronic acids by Dong et al.109 Halimehjani and his research group (2020) have developed a convenient, four-component reaction for the synthesis of dithiocarbamate derivatives using naphthols, formaldehyde, secondary amines, and carbon disulfide. The reactions were carried out in water at room temperature to obtain the corresponding dithiocarbamate compounds with high functional group tolerance in moderate to excellent yields (55–92%) (product 85; Scheme 79). A plausible mechanism was also proposed by the authors, as presented in Scheme 80, where firstly, the reaction between naphthol and benzaldehyde produces o-naphthoquinone methide (A), which then reacts with in situ formed dithiocarbamic acid, by the reaction of amine and carbon disulfide, to form the final product. The advantages of the present methodology include its mild reaction conditions, using water as a solvent, with a broad substrate range, which increases its value from the viewpoint of green chemistry. However, primary amines are not suitable starting materials for this reaction, and no desired product was obtained with other electron-rich arenes such as phenol, resorcinol, pyrocatechol, indole, 1,3,5-trimethoxybenzene, and N,N-dimethylaniline, etc., which serves as a severe drawback of the reaction.110 One-pot multicomponent approach for the synthesis of dithiocarbamate derivatives. Mechanistic details of the catalyst-free synthesis of dithiocarbamate derivatives using water as reaction media. Saha and his co-workers (2020) have reported an iodine-mediated, efficient, and one-pot protocol for the synthesis of S-benzyl dithiocarbamate esters under metal- and solvent-free conditions through the direct coupling of in situ generated dithiocarbamate anions (from amines and carbon disulfide) with benzylic alcohols. The reactions were carried out under neat conditions using molecular iodine as a catalyst at 80 °C under an open-air atmosphere, affording the desired products in good to excellent yields (74–88%) within the duration of 15–30 min (product 86; Scheme 81(a)). A broad range of cyclic and acyclic secondary amines, as well as primary and aromatic amines with various benzylic alcohols, were successfully employed. Interestingly, non-benzylic alcohols such as ethanol, allyl alcohol, n-butanol, and homopropargyl alcohol followed a different reaction pathway to furnish O-thiocarbamates in good yields under identical conditions (product 86.1; Scheme 81(b)). Mechanistic investigations were conducted using radical scavengers (TEMPO and BHT), where an identical yield of the product was obtained, ruling out a radical pathway. Further, it was suggested that a benzylic carbocation intermediate is generated (A), which is subsequently trapped by the dithiocarbamate anion (B) to form the desired product (C). For non-benzylic alcohols, the reaction proceeds through iodine-mediated oxidation of dithiocarbamate anions to form thiuram disulfides (D), followed by nucleophilic attack by the alcohol, leading to the formation of O-thiocarbamate (E). The plausible mechanism has been presented in Scheme 82. The major advantages of this methodology include metal- and solvent-free conditions, a straightforward approach, and the use of inexpensive molecular iodine as a catalyst within short reaction times. However, the protocol is primarily effective for benzylic alcohols in S-alkylation reactions, while non-benzylic alcohols preferentially afford O-thiocarbamates, thereby limiting its general applicability for the synthesis of S-alkyl dithiocarbamates.111 (a) Iodine-mediated reaction of secondary amines and carbon disulfide with benzyl alcohols leading to the formation of dithiocarbamate derivatives, and (b) the synthesis of O-thiocarbamate derivatives employing non-benzylic alcohol. The detailed plausible mechanism of iodine-catalyzed synthesis of dithiocarbamate derivatives via the formation of a benzylic cation intermediate. Murarka and co-workers (2021) have developed an efficient, transition-metal-free, one-pot three-component protocol for the synthesis of S-aryl dithiocarbamate derivatives via the annulation reaction of diaryliodonium triflates, primary/secondary amines, and carbon disulfide in CH2Cl2 at room temperature within about 2–4 h, affording moderate to excellent yields (48–91%) of the corresponding products (Product 87; Scheme 83). The reaction was also found efficient for the scaled-up synthesis of the products. Several reactions were also performed by the authors to understand the chemoselectivity trends for asymmetric diaryliodonium triflates (Scheme 84), where it was found that it is controlled by the electronic and steric factors of the aryl rings of the iodonium salt. Further, it was noted that under the present conditions, the aryl ring, either with more electron-withdrawing nature or having bulky groups migrate to form the final product. Mechanistic studies suggest that a ‘T’-shaped intermediate forms by the reaction of in situ generated dithiocarbamic acid and diaryliodonium triflate, which on ligand coupling results in the formation of the final product (Scheme 85). The advantages of the proposed method include avoiding of expensive and toxic transition metal, strong bases, and high temperature under the environmentally benign conditions using easily available, and inexpensive starting materials. However, the use of DCM as solvent, and moderate yields for several derivatives are some major drawbacks.112 Schematic representation of reaction between amines and symmetric aryl iodonium salts in DCM as reaction media. Reactions of several asymmetric aryl iodonium salts under optimized conditions to evaluate the chemoselectivity trends. A plausible mechanism showing the formation of ‘T’-shaped intermediate. Biju and co-workers (2021) have developed an efficient, and transition-metal-free method for the synthesis of S-aryl dithiocarbamate derivatives via an aryne-based three-component coupling of arynes, carbon disulfide (CS2) and aliphatic amines under the mild conditions using KF/18-crown-6 in THF at room temperature, affording good to excellent yields of the desired products (35–94%) (product 88; Scheme 86(a)). The present reaction proceeds via the initial addition of amines to CS2 followed by the trapping with arynes to furnish the desired products. The advantages of the present protocol include its transition-metal-free and mild reaction conditions with good functional group compatibility. Moreover, the mechanistic experiments, including density functional theory studies, are also provided. Interestingly, under the optimized reaction conditions, a unique four-component coupling with the incorporation of tetrahydrofuran was also observed with 3-triflyloxybenzynes (product 89; Scheme 86(b)). However, with aromatic amines and aliphatic tertiary amines, this protocol failed to produce the desired products. Additionally, unsymmetrical naphthalyne and similar compounds generated 2 inseparable mixture of regioisomers, which is a severe limitation to the present methodology.113 (a) Schematic representation of aryne-based three-component coupling of arynes, carbon disulfide (CS2) and aliphatic amines using KF/18-crown-6; (b) synthesis of dithiocarbamate derivatives via four-component coupling with the incorporation of tetrahydrofuran under the similar conditions. Kandasamy and co-workers (2022) have developed an efficient, straightforward, and green method for the multi-component synthesis of functionalized S-benzyl dithiocarbamate derivatives via the reaction of para-quinone methides, carbon disulfide, and secondary amines in DCM at room temperature under catalyst- and additive-free conditions (product 90; Scheme 87(a)). The desired products were obtained in moderate yields (82–94%) within a short reaction time of about 30 minutes. Mechanistic studies suggest that the product forms via a cation intermediate (Scheme 87(b)). The advantages of the proposed method include mild reaction conditions, relatively short reaction times, broad substrate scope, and ease of operation, which are important features for gram-scale synthesis and make it useful for preparing structurally diverse S-benzyl dithiocarbamates.114 (a) Synthesis of functionalized S-aryl dithiocarbamate derivatives under catalyst-free conditions, and (b) the detailed mechanism showing the reaction between amines, carbon disulfide with para-quinone methides. Once again, a metal- and base-free multicomponent strategy for the synthesis of biologically relevant S-diarylmethane dithiocarbamates was proposed by Murarka et al. (2022), using p-quinone methides, carbon disulfide, and amines. The reactions were performed at room temperature in DCM, which produced the desired products in excellent yields (74–97%) within an hour (product 91; Scheme 88(a)). The protocol exhibited broad substrate scope, with various primary, secondary, cyclic, acyclic, and chiral amines, as well as structurally diverse p-quinone methides. Mechanistic studies suggest that, initially, amines and carbon disulfide react to form dithiocarbamic acid, which then undergoes 1,6-conjugate addition with p-quinone methides to form the intermediate (A). Finally, proton transfer leads to the formation of the corresponding dithiocarbamate derivatives (Scheme 88(b)). In addition, several synthesized compounds demonstrated promising antiproliferative activities, highlighting the biological significance of the methodology.115 (a) Multicomponent strategy for the synthesis of biologically relevant S-diarylmethane dithiocarbamates under base- and catalyst-free conditions, and (b) a plausible mechanism showing the synthesis of S-diarylmethane dithiocarbamates by 1,6-conjugate addition. Chen (2022) and his research group have developed a novel, safe, ecofriendly, triflic acid (TfOH)-catalyzed methodology for the three-component synthesis of dithiocarbamate derivatives by the reaction of α-diazoesters with CS2 and pyrrolidine under continuous flow conditions in good yields (28–99%) within 10 minutes at room temperature, under the continuous flow reaction conditions (products 92–94; Scheme 89). A plausible mechanism of the transformation has been provided in Scheme 90, which suggest that firstly, the α-diazo compound get decomposed in the presence of triflic acid to produce the ionic pair (I). This pair get attacked by pyrrolidine-1-1-dithiocarbamic acid (II), generated from the reaction of carbon disulfide (2), and pyrrolidine (3a), to form the ionic pair (III). Finally, the S–H insertion product 4a forms via the deprotonation of (III), along with the regeneration of the catalyst TfOH. The advantages include a wide substrate scope of diazo compounds with high functional group tolerance. However, the yields of several substrates were significantly poor, which serve as major drawback.116 Triflic acid employed synthesis of dithiocarbamate derivatives under continuous flow conditions. The detailed mechanistic pathway showing the reaction between α-diazoesters with CS2 and secondary amines, forming ionic pairs as intermediates. Saha and co-workers (2023) have developed a novel, efficient, environmentally benign, and metal-free one-pot two-step protocol for the synthesis of gem-bis(dithiocarbamates) (product 95; Scheme 91(a)). The reaction occurs via the trifunctionalization of phenylacetylenes with molecular bromine in methanol at room temperature, followed by the addition of in situ generated dithiocarbamate salts (from amines and carbon disulfide) in the presence of triethylamine as a base in acetonitrile with a small amount of water at 65 °C, affording good to excellent yields (78–90%) of the desired products within about 2–3 h. The plausible mechanism was also reported, which is presented in Scheme 91(b). The advantages of the proposed method include metal-free conditions, an efficient one-pot strategy, and easily available starting materials. However, the use of molecular bromine poses safety and handling concerns due to its corrosive and toxic nature. Purification by column chromatography is required, and excess bromine can lead to side reactions such as dithiocarbamate dimer formation, which affect yield and are the major limitation of this methodology.117 (a) One-pot catalyst-free synthesis of gem-bis(dithiocarbamate) derivatives using triethylamine as a base, and (b) a plausible mechanism of the reaction between terminal alkynes, molecular bromine with in situ generated dithiocarbamate salt under basic conditions by Saha et al.117 Vchislo et al. (2023) have developed a one-pot protocol for the efficient synthesis of S-organyl-N-butyl dithiocarbamates via the reaction involving two stages: firstly, the reaction of butylamine with carbon disulfide using NaOH as a base in diethylether, followed by the addition of 2-chloroethanol and benzoyl chloride, each in a separate reaction, at room temperature, affording 83% and 92% of the desired products, respectively, within 3 hours (products 96–97; Scheme 92). Moreover, the protocol demonstrates practical application of the products in the flotation of gold-bearing ores as a float-collecting agent, which highlights their industrial relevance. The advantages of the proposed method include a simple one-pot procedure, mild reaction conditions, and good yields. However, the use of organic solvents and limited substrate scope are some major limitations.118 Synthesis of S-organyl-N-butyl dithiocarbamates using NaOH as base in diethyl ether as reaction medium. Xie and his co-workers (2024) have developed a novel, convenient, and catalyst-free method for the multicomponent synthesis of S-alkyl dithiocarbamate derivatives via a three-component reaction of cyclic sulfonium salts, carbon disulfide (CS2), and aliphatic amines under mild reaction conditions in DMSO at room temperature, under aerobic conditions to produce good to excellent yields (up to 93%) of the desired products with excellent tolerance to different functionalities (product 98; Scheme 93(a)). The scope of the reaction was explored widely using various sulfonium salts, such as alkenyl, aryl, and alkynyl sulfonium salts, with different cyclic and acyclic secondary aliphatic amines. The synthetic applications of the present methodology were also explored for the functionalization of several drugs, such as menthol, lbuprofen, adamantanemethanol, ketoprofen, and amoxapine, etc (products 99–103; Scheme 94). The mechanistic studies suggest that the reaction proceeds via nucleophilic ring-opening of sulfonium salts by in situ generated dithiocarbamic acid from the reaction of amine and carbon disulfide (Scheme 93(b)). The advantages of the protocol include broad substrate scope, high functional group tolerance, readily available starting materials, ease of operation, gram-scale synthesis, and late-stage functionalization. Collectively, these make the reaction quite attractive in pharmaceutical chemistry and organic synthesis. However, this method could not form the desired products starting from aromatic amines, which serves as major limitation of this methodology.119 (a) Synthesis of S-alkyl dithiocarbamate derivatives via a three-component reaction of cyclic sulfonium salts, carbon disulfide (CS2), and aliphatic amines, and (b) a representation of the plausible mechanistic pathway via ring-opening of cyclic sulfonium salts. Dithiocarbamate functionalization of various drug molecules by using the standard reaction conditions by Xie et al.119 Yan and co-workers (2025) have developed a rapid and efficient catalyst-free method for the multicomponent synthesis of S-vinyl dithiocarbamate derivatives using vinyl sulfonium salts, carbon disulfide (CS2), and amines in DCE at room temperature, affording moderate to excellent yields (60–93%) of the desired products within the reaction time of about 2 h (product 104; Scheme 95(a)). The reaction proceeds via nucleophilic ring-opening of the vinyl sulfonium salt by in situ generated dithiocarbamic acid, from the reaction of amine and carbon disulfide (Scheme 95(b). The protocol demonstrates a broad substrate scope, tolerating a wide variety of cyclic and acyclic amines as well as differently substituted vinyl sulfonium salts, along with good functional group compatibility and successful gram-scale synthesis. The advantages of this method include catalyst- and additive-free conditions, mild reaction environment, short reaction time, operational simplicity, and high efficiency, making it an attractive and sustainable strategy for dithiocarbamate synthesis. However, the use of chlorinated solvents (DCE) may limit their environmental friendliness, which is the major drawback of this methodology.120 (a) Catalyst-free synthesis of S-vinyl dithiocarbamate derivatives using vinyl sulfonium salts, carbon disulfide (CS2), and amines and (b) a plausible mechanism of the catalyst-free synthesis of S-vinyl dithiocarbamate derivatives via ring-opening of vinyl sulfonium salts by in situ generated dithiocarbamic acid by Yan and group. Saha and co-workers (2026) have developed a metal-free, efficient, and stereoselective method for the synthesis of Z-styrenyl-1,2-bis dithiocarbamate derivatives via the reaction of alkynyl bromides with in situ generated dithiocarbamic acids (from secondary amines and carbon disulfide) in THF at 65 °C within 5 h under a nitrogen atmosphere, affording good to excellent yields (60–85%) of the desired products (product 105; Scheme 96). The reaction proceeds through a concerted nucleophilic substitution at the C(sp)–Br bond to form an alkynyl dithiocarbamate intermediate, followed by neighboring-group-assisted addition of another dithiocarbamic acid, leading to stereoselective Z-product formation, as supported by DFT studies. The protocol shows broad substrate scope, tolerating various (hetero)aryl-substituted alkynyl bromides with both electron-donating and electron-withdrawing substituents at different positions, with both cyclic and acyclic secondary amines, and successful gram-scale synthesis. Moreover, biologically active moieties-tethered alkynyl bromides, such as (−)-menthol and diacetone-d-glucose, were also produced, the desired products with good yields, with (−)-menthol and d-glucose units unaffected. The advantages of this method include catalyst- and additive-free conditions, stereoselectivity, operational simplicity, and good efficiency, making it a practical and eco-friendly approach for synthesizing bi-functionalized dithiocarbamates. However, limitations such as the incompatibility of aliphatic alkynyl bromides, requirement of an inert atmosphere, moderate yields in some cases, and dependence on pre-formed alkynyl bromides may restrict its broader applicability.121 Schematic representation of the synthesis of Z-styrenyl-1,2-bis dithiocarbamate derivatives via the reaction of alkynyl bromides with in situ generated dithiocarbamic acids. Conclusions In conclusion, dithiocarbamate derivatives play a key role in various fields, including medicine, material science, coordination chemistry, industry, and agriculture. Throughout this review, various methodologies, catalytic systems, and reaction conditions have been explored, used for the synthesis of these moieties. This review discusses recent advancements in the development of efficient and versatile synthetic methodologies, including multicomponent reactions, catalyst-assisted protocols, transition-metal-catalyzed transformations, ionic liquid-mediated processes, photocatalytic approaches, and other strategies, by critically analyzing research work performed in this field. Despite these achievements, several challenges remain, including the use of hazardous reagents, limited catalyst recyclability, substrate-specific limitations, and difficulties associated with large-scale industrial implementation. Furthermore, the development of highly selective, sustainable, and economically viable protocols continues to be an important research objective. Overall, the rapid evolution of synthetic methodologies highlights the growing importance of organic dithiocarbamates and provides a strong foundation for future innovations in this dynamic field. Author contributions The authors confirm their contributions to the paper as follows: Saumy Sharma: data collection and analysis, Soumya Tripathi: data collection and analysis, Subhash Banerjee: conceptualization, supervision, review and editing, formal analysis, etc. Conflicts of interest There are no conflicts to declare.