M polynomial and degree based topological indices of six common synthetic polymers Authors: Noel George, Usha Arcot, Bruntha Devi Palanisamy Published: 2026 ABSTRACT The M-polynomial is a powerful algebraic tool that encodes structural information of molecular graphs and enables the derivation of numerous degree-based topological indices through algebraic operations. In this paper, we compute the general forms of M-polynomials for six widely used synthetic polymers modeled as linear chains of n repeating monomer units: Polyethylene (PE), Polypropylene (PP), Polyvinyl Chloride (PVC), Polystyrene (PS), Nylon-6,6, and Polyethylene Terephthalate (PET). Using hydrogen-suppressed molecular graphs, we derive the edge partitions based on vertex degrees for each polymer chain and express the M-polynomials as explicit functions of the chain length parameter n. From these M-polynomials, eleven degree-based topological indices are computed, including the first and second Zagreb indices, the modified second Zagreb index, the general Randić index, the symmetric division degree index, the harmonic index, the inverse sum index, the augmented Zagreb index, the atom-bond connectivity index, and the geometric-arithmetic index. Three-dimensional surface plots of the M-polynomials and comparative analyses of the topological indices across all six polymers are presented. The results reveal distinctive structural characteristics of each polymer class and demonstrate the utility of M-polynomials in the systematic study of polymer molecular topology. Furthermore, we discuss the relevance of these computations to quantitative structure–property relationship (QSPR) studies for predicting physicochemical properties of polymers. Introduction Chemical graph theory provides a framework for modeling molecular structures as graphs, where atoms are represented as vertices and chemical bonds as edges. A molecular graph \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$G = (V, E)$$\end{document} consists of a vertex set V(G) and an edge set E(G). The degree \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$d_v$$\end{document} of a vertex v is the number of edges incident to v. Two vertices u and v are adjacent if they share an edge. The minimum and maximum degrees of G are denoted by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\delta (G)$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta (G)$$\end{document}, respectively1,2. Topological indices are numerical invariants of molecular graphs that correlate with physicochemical properties of chemical compounds. They play a crucial role in quantitative structure–property relationships (QSPR) and quantitative structure–activity relationships (QSAR) studies2–5. The first Zagreb index, introduced by Gutman and Trinajstić1, was shown to be related to the total \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy of molecules. Since then, numerous degree-based topological indices have been proposed, including the Randić index6, which correlates strongly with boiling points, surface areas, and chromatography retention times of alkanes, and the atom-bond connectivity index7, which models the enthalpy of formation of alkanes with high accuracy. Literature review The concept of M-polynomial was introduced by Deutsch and Klavžar8 as a unifying algebraic framework from which multiple degree-based topological indices can be derived through differential and integral operators. This elegant approach provides a single polynomial from which a wide family of indices can be extracted, thereby avoiding the need for separate derivations for each index. Since its introduction, the M-polynomial framework has been extensively applied to various molecular structures. Munir et al9. computed the M-polynomial and degree-based topological indices of polyhex nanotubes, establishing the utility of this approach for nanotubular structures. Kwun et al10. extended this work to V-phenylenic nanotubes and nanotori. Raza and Sukaiti11derived M-polynomials for two classes of dendrimer nanostars and four types of nanotubes, providing a detailed comparison of the resulting indices. Ali et al12. applied M-polynomials to zigzag and rhombic benzenoid systems. In the context of nanostructures and chemical networks, Yu et al13. investigated the M-polynomial and topological indices of several transformed networks, demonstrating the versatility of this framework for complex network topologies. Liu et al14. computed topological properties of concealed non-Kekuléan benzenoid hydrocarbons, extending the applicability of degree-based indices to polycyclic aromatic compounds. Gao et al15. studied the redefined Zagreb indices of titania nanotubes. Beyond the M-polynomial framework, several studies have demonstrated the strong predictive power of degree-based topological indices in QSPR modeling. Hayat et al4. studied graphs with given connectivity and their minimum Sombor index, demonstrating applications to QSPR studies of monocarboxylic acids through regression analysis. In a related study, Hayat et al5. investigated the extremal hyper-Zagreb index of trees with given segments and showed strong applications to regression modeling in QSPR studies. Dearden3 provided a comprehensive review of the use of topological indices in QSAR and QSPR modeling, establishing their reliability for predicting molecular properties. The bond additive modeling approach by Vukičević and Gašperov16introduced the Adriatic indices, while Furtula et al17. proposed the augmented Zagreb index. Vukičević and Furtula18 also studied indices based on the ratios of geometrical and arithmetical means of end-vertex degrees. More recently, several studies have introduced novel variants of Zagreb-type indices and demonstrated their effectiveness in QSPR modeling of physicochemical properties. Çiftçi19 introduced the Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta$$\end{document} indices for benzene derivatives and established strong QSPR correlations with experimentally measured properties. In related work, Çiftçi20 proposed the Zagreb omicron indices and Çiftçi21 developed the Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho$$\end{document} indices, both with applications to QSPR modeling. Yamaç22 introduced Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau$$\end{document} indices for benzene derivatives, and Çiftçi, Yamaç and Denizler23 proposed the Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upsilon$$\end{document} indices with demonstrated QSPR applications. These studies collectively illustrate the growing applicability of degree-based descriptors in quantitative property prediction and cheminformatics, further motivating the present work. In the context of extremal graph theory and topological indices, Das and Mondal24 investigated Zagreb connection indices in structure–property modelling, establishing bounds and extremal results that underpin the theoretical foundations of molecular descriptor research. In the domain of polymer and biochemical structures, Maragadam et al25. computed the M-polynomial and NM-polynomial for selected anticancer drugs, highlighting the practical utility of molecular descriptors in pharmaceutical research. Lokesha et al26. investigated polysaccharides such as amylose and the blue starch–iodine complex using edge-dividing methods, deriving several topological indices and demonstrating the applicability of graph-theoretic descriptors to biochemical structures. Shanmukha et al27. computed M-polynomials and topological indices for Styrene-Butadiene Rubber (SBR), providing insights into the structural characterization of synthetic polymers using mathematical descriptors. In a related study, Shanmukha et al28. conducted a comparative study of multilayered graphene structures using M-polynomials, deriving eleven degree-based topological indices with 3D visualizations to analyze variations among monolayer, bilayer, and trilayer configurations. Research gap and motivation Despite the extensive application of M-polynomials to nanostructures, dendrimers, and chemical networks, a notable gap exists in the literature: the systematic computation of M-polynomials and degree-based topological indices for common synthetic polymer chains remains largely unexplored. Polymers such as polyethylene, polypropylene, polyvinyl chloride, polystyrene, nylon, and polyester constitute the most commercially significant class of chemical compounds, with annual global production exceeding 400 million tonnes. Their physicochemical properties, including melting point, glass transition temperature, tensile strength, and solubility, are of immense industrial and environmental importance. While previous studies have focused on nanotubes9,11, dendrimers11, benzenoid systems12, and transformed networks13, comparatively few systematic studies have derived closed-form M-polynomial expressions for linear polymer chains as functions of the number of repeating units n. This represents a notable gap because: (i)Polymers represent the most widely produced class of synthetic chemical compounds.(ii)The linear chain structure of polymers, with its characteristic terminal effects and periodic interior, offers rich mathematical structure for graph-theoretic analysis.(iii)Establishing topological characterizations of polymer molecular graphs is essential for developing QSPR models3–5 that can predict polymer properties from structural descriptors.The current study addresses this gap by providing, to the best of our knowledge, among the first systematic M-polynomial analyses of six representative commodity polymers. (i)Polymers represent the most widely produced class of synthetic chemical compounds. Polymers represent the most widely produced class of synthetic chemical compounds. (ii)The linear chain structure of polymers, with its characteristic terminal effects and periodic interior, offers rich mathematical structure for graph-theoretic analysis. The linear chain structure of polymers, with its characteristic terminal effects and periodic interior, offers rich mathematical structure for graph-theoretic analysis. (iii)Establishing topological characterizations of polymer molecular graphs is essential for developing QSPR models3–5 that can predict polymer properties from structural descriptors. Establishing topological characterizations of polymer molecular graphs is essential for developing QSPR models3–5 that can predict polymer properties from structural descriptors. Novelty and contributions The main contributions and novel aspects of this work are as follows: Derive general closed-form M-polynomial expressions for six common synthetic polymers (PE, PP, PVC, PS, Nylon-6,6, PET) as explicit functions of the chain length n, which, to the best of our knowledge, have not previously been reported in a unified form.Discover and formally prove the graph-theoretic equivalence of PP and PVC in the hydrogen-suppressed representation, establishing that their topological indices are identical for all n.Compute eleven degree-based topological indices and express them as linear functions of n, providing ready-to-use formulas for QSPR applications.Establish a consistent structural complexity ordering among the six polymers that holds across all eleven indices.Provide a comparative graphical analysis and discuss the relevance to QSPR prediction of physical properties. Derive general closed-form M-polynomial expressions for six common synthetic polymers (PE, PP, PVC, PS, Nylon-6,6, PET) as explicit functions of the chain length n, which, to the best of our knowledge, have not previously been reported in a unified form. Derive general closed-form M-polynomial expressions for six common synthetic polymers (PE, PP, PVC, PS, Nylon-6,6, PET) as explicit functions of the chain length n, which, to the best of our knowledge, have not previously been reported in a unified form. Discover and formally prove the graph-theoretic equivalence of PP and PVC in the hydrogen-suppressed representation, establishing that their topological indices are identical for all n. Discover and formally prove the graph-theoretic equivalence of PP and PVC in the hydrogen-suppressed representation, establishing that their topological indices are identical for all n. Compute eleven degree-based topological indices and express them as linear functions of n, providing ready-to-use formulas for QSPR applications. Compute eleven degree-based topological indices and express them as linear functions of n, providing ready-to-use formulas for QSPR applications. Establish a consistent structural complexity ordering among the six polymers that holds across all eleven indices. Establish a consistent structural complexity ordering among the six polymers that holds across all eleven indices. Provide a comparative graphical analysis and discuss the relevance to QSPR prediction of physical properties. Provide a comparative graphical analysis and discuss the relevance to QSPR prediction of physical properties. Definitions and operators Definition 1.1 (M-polynomial8) Let G be a graph with minimum degree \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\delta$$\end{document} and maximum degree \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta$$\end{document}. The M-polynomial of G is defined as1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; \sum _{\delta \le i \le j \le \Delta } m_{ij}(G)\, x^i\, y^j, \end{aligned}$$\end{document}where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$m_{ij}(G)$$\end{document} denotes the number of edges \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$e = uv$$\end{document} of G such that \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\{d_u, d_v\} = \{i, j\}$$\end{document}. The key advantage of the M-polynomial is that numerous topological indices can be recovered from it using appropriate operators8. We define the following differential and integral operators on f(x, y):2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} {{\,\mathrm{D_x}\,}}(f)&= x\,\frac{\partial f}{\partial x},&{{\,\mathrm{D_y}\,}}(f)&= y\,\frac{\partial f}{\partial y}, \end{aligned}$$\end{document}3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} {{\,\mathrm{S_x}\,}}(f)&= \int _0^x \frac{f(t,y)}{t}\,dt,&{{\,\mathrm{S_y}\,}}(f)&= \int _0^y \frac{f(x,t)}{t}\,dt, \end{aligned}$$\end{document}and additionally the quotient operator \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$J(f(x,y)) = f(x,x)$$\end{document} and the mean operator \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$Q_\alpha (f(x,y)) = x^\alpha f(x,y)$$\end{document}. Table 1 summarizes the topological indices considered in this paper and their derivation from the M-polynomial.Table 1Topological indices and their derivation from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M(G;\,x,y)$$\end{document}.Topological indexDefinitionDerivation from M(G; x, y)First Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} (d_u + d_v)$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}+ {{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Second Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} d_u\, d_v$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}{{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Modified 2nd Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{1}{d_u\, d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{S_x}\,}}{{\,\mathrm{S_y}\,}})\,M\big |_{x=y=1}$$\end{document}Randić \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{1}{\sqrt{d_u\, d_v}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}^{1/2}{{\,\mathrm{S_y}\,}}^{1/2}\,M\big |_{x=y=1}$$\end{document}Reciprocal Randić \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1/2}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \sqrt{d_u\, d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{D_x}\,}}^{1/2}{{\,\mathrm{D_y}\,}}^{1/2}\,M\big |_{x=y=1}$$\end{document}Sym. Div. Deg. SDD16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \!\left( \frac{d_u}{d_v} + \frac{d_v}{d_u}\right)$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}{{\,\mathrm{S_y}\,}}+ {{\,\mathrm{S_x}\,}}{{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Harmonic H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{2}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2\,{{\,\mathrm{S_x}\,}}\, J\,M\big |_{x=1}$$\end{document}Inverse Sum \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{IS}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{d_u\, d_v}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}\, J\,{{\,\mathrm{D_x}\,}}{{\,\mathrm{D_y}\,}}\,M\big |_{x=1}$$\end{document}Augmented Zagreb AZ17\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \!\left( \frac{d_u d_v}{d_u+d_v-2}\right) ^{\!3}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}^3\, Q_{-2}\, J\, {{\,\mathrm{D_x}\,}}^3{{\,\mathrm{D_y}\,}}^3\,M\big |_{x=1}$$\end{document}Atom-Bond Conn. ABC7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \sqrt{\frac{d_u+d_v-2}{d_u\, d_v}}$$\end{document}See Def. 2 in7Geometric-Arith. GA18\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{2\sqrt{d_u d_v}}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2\,{{\,\mathrm{S_x}\,}}\, J\,{{\,\mathrm{D_x}\,}}^{1/2}{{\,\mathrm{D_y}\,}}^{1/2}\,M\big |_{x=1}$$\end{document} Table 1Topological indices and their derivation from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M(G;\,x,y)$$\end{document}.Topological indexDefinitionDerivation from M(G; x, y)First Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} (d_u + d_v)$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}+ {{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Second Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} d_u\, d_v$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}{{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Modified 2nd Zagreb \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{1}{d_u\, d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{S_x}\,}}{{\,\mathrm{S_y}\,}})\,M\big |_{x=y=1}$$\end{document}Randić \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{1}{\sqrt{d_u\, d_v}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}^{1/2}{{\,\mathrm{S_y}\,}}^{1/2}\,M\big |_{x=y=1}$$\end{document}Reciprocal Randić \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1/2}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \sqrt{d_u\, d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{D_x}\,}}^{1/2}{{\,\mathrm{D_y}\,}}^{1/2}\,M\big |_{x=y=1}$$\end{document}Sym. Div. Deg. SDD16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \!\left( \frac{d_u}{d_v} + \frac{d_v}{d_u}\right)$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({{\,\mathrm{D_x}\,}}{{\,\mathrm{S_y}\,}}+ {{\,\mathrm{S_x}\,}}{{\,\mathrm{D_y}\,}})\,M\big |_{x=y=1}$$\end{document}Harmonic H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{2}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2\,{{\,\mathrm{S_x}\,}}\, J\,M\big |_{x=1}$$\end{document}Inverse Sum \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{IS}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{d_u\, d_v}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}\, J\,{{\,\mathrm{D_x}\,}}{{\,\mathrm{D_y}\,}}\,M\big |_{x=1}$$\end{document}Augmented Zagreb AZ17\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \!\left( \frac{d_u d_v}{d_u+d_v-2}\right) ^{\!3}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\,\mathrm{S_x}\,}}^3\, Q_{-2}\, J\, {{\,\mathrm{D_x}\,}}^3{{\,\mathrm{D_y}\,}}^3\,M\big |_{x=1}$$\end{document}Atom-Bond Conn. ABC7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \sqrt{\frac{d_u+d_v-2}{d_u\, d_v}}$$\end{document}See Def. 2 in7Geometric-Arith. GA18\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\displaystyle \sum _{uv\in E} \frac{2\sqrt{d_u d_v}}{d_u + d_v}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2\,{{\,\mathrm{S_x}\,}}\, J\,{{\,\mathrm{D_x}\,}}^{1/2}{{\,\mathrm{D_y}\,}}^{1/2}\,M\big |_{x=1}$$\end{document} Topological indices and their derivation from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M(G;\,x,y)$$\end{document}. Molecular graph models of polymer chains We use hydrogen-suppressed (heavy-atom) molecular graphs where each vertex represents a non-hydrogen atom (C, N, O, Cl) and each edge represents a covalent bond. For a polymer chain of n repeating units, the terminal effects at chain ends produce vertices of reduced degree compared to interior positions. The edge set is partitioned as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E(G) = \bigcup _{i \le j} E_{\{i,j\}}$$\end{document}, where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{\{i,j\}} = \{uv \in E(G): \{d_u, d_v\} = \{i,j\}\}$$\end{document}. The hydrogen-suppressed molecular graphs for all six polymers are depicted in Figure 1. In each graph, vertices are color-coded by degree: red indicates degree 1 (terminal or pendant atoms), blue indicates degree 2 (chain interior atoms), and green indicates degree 3 (branching or ring-junction atoms).Fig. 1Hydrogen-suppressed molecular graphs of the six synthetic polymers studied: (a) Polyethylene (PE, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (b) Polypropylene (PP, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (c) Polyvinyl Chloride (PVC, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (d) Polystyrene (PS, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=2$$\end{document}), (e) Nylon-6,6 (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=1$$\end{document}), and (f) Polyethylene Terephthalate (PET, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=1$$\end{document}). Vertices are color-coded by degree: red (degree 1), blue (degree 2), green (degree 3). Hydrogen-suppressed molecular graphs of the six synthetic polymers studied: (a) Polyethylene (PE, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (b) Polypropylene (PP, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (c) Polyvinyl Chloride (PVC, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=3$$\end{document}), (d) Polystyrene (PS, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=2$$\end{document}), (e) Nylon-6,6 (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=1$$\end{document}), and (f) Polyethylene Terephthalate (PET, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n=1$$\end{document}). Vertices are color-coded by degree: red (degree 1), blue (degree 2), green (degree 3). Polyethylene (PE) Polyethylene has the simplest repeating unit: –[CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}–CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}]–. In the hydrogen-suppressed graph (Figure 1a), a chain of n monomers produces a linear chain of 2n carbon atoms. The two terminal carbons have degree 1, while the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2n-2$$\end{document} interior carbons each have degree 2. The total number of edges is \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|E| = 2n - 1$$\end{document}, and the edge partition for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document} is:4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} |E_{\{1,2\}}| = 2, \qquad |E_{\{2,2\}}| = 2n - 3. \end{aligned}$$\end{document} Theorem 2.1 Let G be the molecular graph of a PE chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document} repeating units. Then the M-polynomial of G is5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; 2\,xy^2 \;+\; (2n-3)\,x^2 y^2. \end{aligned}$$\end{document} Proof The hydrogen-suppressed graph of PE with n repeating units is the path graph \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$P_{2n}$$\end{document} on 2n vertices. There are exactly 2 pendant edges (connecting a terminal vertex of degree 1 to an interior vertex of degree 2), contributing the term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2\,x^1 y^2$$\end{document}. The remaining \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2n - 3$$\end{document} edges connect two interior vertices, each of degree 2, contributing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(2n-3)\,x^2 y^2$$\end{document}. Summing these terms yields (5). Polypropylene (PP) Polypropylene has repeating unit –[CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}–CH(CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_3$$\end{document})]–, contributing 3 heavy atoms per monomer (2 backbone carbons plus 1 pendant methyl carbon) for a total of 3n vertices (Figure 1b). The branching at alternate backbone carbons creates degree-3 vertices at interior even positions. For \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document}, the edge partition is:6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} |E_{\{1,2\}}| = 1, \quad |E_{\{1,3\}}| = n, \quad |E_{\{2,2\}}| = 1, \quad |E_{\{2,3\}}| = 2n - 3. \end{aligned}$$\end{document} Theorem 2.2 Let G be the molecular graph of a PP chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document} repeating units. Then7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; xy^2 \;+\; n\,xy^3 \;+\; x^2 y^2 \;+\; (2n-3)\,x^2 y^3. \end{aligned}$$\end{document} Proof The backbone consists of 2n carbons arranged alternately: odd-indexed carbons of degree 2 and even-indexed carbons of degree 3 (bonded to two backbone neighbors and one pendant methyl). The pendant methyl carbons each have degree 1. The terminal carbon \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1$$\end{document} has degree 1, and the terminal carbon \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n}$$\end{document} has degree 2. Counting each edge type:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1\text {--}C_2$$\end{document}: one edge of type (1, 3), contributing to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{\{1,3\}}$$\end{document}.Pendant methyls on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_2, C_4, \ldots , C_{2n-2}$$\end{document}: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(n-1)$$\end{document} edges of type (1, 3); pendant methyl on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n}$$\end{document}: one edge of type (1, 2).Backbone edges between odd and even interior carbons: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(2n-3)$$\end{document} edges of type (2, 3).\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n-1}\text {--}C_{2n}$$\end{document}: one edge of type (2, 2).Totaling: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|E_{\{1,2\}}| = 1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|E_{\{1,3\}}| = 1 + (n-1) = n$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|E_{\{2,2\}}| = 1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|E_{\{2,3\}}| = 2n-3$$\end{document}, giving \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$3n - 1$$\end{document} edges. The M-polynomial follows. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1\text {--}C_2$$\end{document}: one edge of type (1, 3), contributing to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{\{1,3\}}$$\end{document}. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1\text {--}C_2$$\end{document}: one edge of type (1, 3), contributing to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{\{1,3\}}$$\end{document}. Pendant methyls on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_2, C_4, \ldots , C_{2n-2}$$\end{document}: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(n-1)$$\end{document} edges of type (1, 3); pendant methyl on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n}$$\end{document}: one edge of type (1, 2). Pendant methyls on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_2, C_4, \ldots , C_{2n-2}$$\end{document}: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(n-1)$$\end{document} edges of type (1, 3); pendant methyl on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n}$$\end{document}: one edge of type (1, 2). Backbone edges between odd and even interior carbons: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(2n-3)$$\end{document} edges of type (2, 3). Backbone edges between odd and even interior carbons: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(2n-3)$$\end{document} edges of type (2, 3). \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n-1}\text {--}C_{2n}$$\end{document}: one edge of type (2, 2). \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n-1}\text {--}C_{2n}$$\end{document}: one edge of type (2, 2). Polyvinyl chloride (PVC) PVC has repeating unit –[CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}–CHCl]–, with total heavy atoms 3n (2 backbone carbons + 1 chlorine per monomer). Since chlorine is a monovalent pendant atom (degree 1) in the hydrogen-suppressed graph (Figure 1c), the graph topology is isomorphic to that of PP. Theorem 2.3 Let G be the molecular graph of a PVC chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document} repeating units. Then the M-polynomial is identical to that of PP:8\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; xy^2 \;+\; n\,xy^3 \;+\; x^2 y^2 \;+\; (2n-3)\,x^2 y^3. \end{aligned}$$\end{document} Remark 2.4 The graph-theoretic isomorphism between PP and PVC molecular graphs implies that all degree-based topological indices derived from the M-polynomial are identical for these two polymers at the same chain length. This reflects a well-known limitation of degree-based topological descriptors: they depend solely on vertex degrees and edge connectivity, not on the chemical identity or atomic mass of individual atoms. In the hydrogen-suppressed representation, the pendant methyl carbon in PP and the pendant chlorine atom in PVC both appear as degree-1 vertices, rendering the two graphs indistinguishable. To differentiate such chemically distinct but topologically equivalent structures, one must employ alternative approaches such as weighted molecular graphs, atom-type-specific descriptors, or distance-based indices2. Polystyrene (PS) Polystyrene has repeating unit –[CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}–CH(C\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_6$$\end{document}H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_5$$\end{document})]–, where each pendant phenyl group contributes 6 ring carbons and 7 edges (6 ring edges + 1 bond to backbone). In the heavy-atom graph (Figure 1d), the ring carbon bonded to the backbone (1-position) has degree 3, while the remaining five ring carbons have degree 2. For \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document}:9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} |E_{\{1,3\}}| = 1, \quad |E_{\{2,2\}}| = 4n+1, \quad |E_{\{2,3\}}| = 4n-2, \quad |E_{\{3,3\}}| = n-1. \end{aligned}$$\end{document} Theorem 2.5 Let G be the molecular graph of a PS chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document} repeating units. Then10\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; xy^3 \;+\; (4n+1)\,x^2 y^2 \;+\; (4n-2)\,x^2 y^3 \;+\; (n-1)\,x^3 y^3. \end{aligned}$$\end{document} Proof Each monomer unit contributes 8 heavy atoms (2 backbone + 6 ring carbons), giving a total of 8n vertices for the polymer chain. The terminal backbone carbon \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1$$\end{document} has degree 1, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_1\text {--}C_2$$\end{document} is the unique (1, 3) edge. Interior even backbone carbons (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_2, \ldots , C_{2n-2}$$\end{document}) have degree 3 and are each bonded to a phenyl ring’s attachment carbon (also degree 3), giving \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n-1$$\end{document} edges of type (3, 3). The terminal \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{2n}$$\end{document} has degree 2, so its bond to the phenyl attachment carbon (degree 3) is of type (2, 3). The phenyl rings contribute \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$4n+1$$\end{document} edges of type (2, 2) from internal ring bonds and edges between degree-2 backbone and ring carbons, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$4n-2$$\end{document} edges of type (2, 3) from ring carbons adjacent to degree-3 attachment carbons and backbone connections. The total is \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$9n - 1$$\end{document} edges. Nylon-6,6 Nylon-6,6 is a polyamide with repeating unit –[NH–(CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document})\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_6$$\end{document}–NH–CO–(CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document})\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_4$$\end{document}–CO]–, containing 16 heavy atoms per monomer (2N + 12 C + 2O). As shown in Figure 1e, each carbonyl carbon has degree 3 (bonded to an amide nitrogen, a carbonyl oxygen, and an adjacent carbon), while carbonyl oxygens are pendant with degree 1. Amide nitrogens and methylene carbons have degree 2 in the interior. For \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 1$$\end{document}:11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} |E_{\{1,2\}}| = 2, \quad |E_{\{1,3\}}| = 2n-1, \quad |E_{\{2,2\}}| = 10n, \quad |E_{\{2,3\}}| = 4n-2. \end{aligned}$$\end{document} Theorem 2.6 Let G be the molecular graph of a Nylon-6,6 chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 1$$\end{document} repeating units. Then12\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; 2\,xy^2 \;+\; (2n-1)\,xy^3 \;+\; 10n\,x^2 y^2 \;+\; (4n-2)\,x^2 y^3. \end{aligned}$$\end{document} Proof The linear chain of n repeating units contains 16n vertices and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$16n - 1$$\end{document} edges. The terminal nitrogen (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_1$$\end{document}) has degree 1, giving one (1, 2) edge. The terminal carbonyl carbon (rightmost) has degree 2 instead of 3, so its bond to the pendant oxygen becomes (1, 2) rather than (1, 3), and its bond to the preceding methylene becomes (2, 2) rather than (2, 3). Each interior unit contributes 2 carbonyl oxygens (pendant, degree 1) bonded to carbonyl carbons (degree 3), accounting for the (1, 3) edges. The 10n edges of type (2, 2) arise from methylene–methylene, methylene–nitrogen, and nitrogen–methylene bonds. The (2, 3) edges occur at amide nitrogen–carbonyl carbon and carbonyl carbon–methylene junctions. Polyethylene terephthalate (PET) PET has repeating unit –[O–CO–C\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_6$$\end{document}H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_4$$\end{document}–CO–O–CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}–CH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}]–, containing 14 heavy atoms per monomer (8C + 4O). As illustrated in Figure 1f, the para-disubstituted benzene ring creates two degree-3 ring carbons (at the 1- and 4-positions), and the two carbonyl carbons also have degree 3. For \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 1$$\end{document}:13\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} |E_{\{1,2\}}| = 1, \;\; |E_{\{1,3\}}| = 2n+1, \;\; |E_{\{2,2\}}| = 5n-2, \;\; |E_{\{2,3\}}| = 6n-1, \;\; |E_{\{3,3\}}| = 2n. \end{aligned}$$\end{document} Theorem 2.7 Let G be the molecular graph of a PET chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 1$$\end{document} repeating units. Then14\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M(G;\,x,y) \;=\; xy^2 \;+\; (2n+1)\,xy^3 \;+\; (5n-2)\,x^2 y^2 \;+\; (6n-1)\,x^2 y^3 \;+\; 2n\,x^3 y^3. \end{aligned}$$\end{document} Proof The chain contains 14n vertices and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$15n-1$$\end{document} edges. Each monomer contributes a para-disubstituted benzene ring with two degree-3 ring carbons (positions 1 and 4) and four degree-2 ring carbons. The two carbonyl carbons per monomer each have degree 3 (bonded to an ester oxygen, a carbonyl oxygen, and a ring or methylene carbon). The pendant carbonyl oxygens have degree 1. The ester oxygens and ethylene carbons have degree 2. The (3, 3) edges arise from carbonyl carbon–ring attachment bonds (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_2\text {--}C_4$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_7\text {--}C_{10}$$\end{document} in the notation of Section 2), giving 2n such edges. Terminal adjustments affect only the leftmost ester oxygen (degree 1) and the rightmost ethylene carbon (degree 1). Degree-based topological indices Using the M-polynomials derived in Section 2 and the operator formulas from Table 1, we compute the degree-based topological indices for each polymer. Tables 2–6 present the numerical values for selected values of n.Table 2Degree-based topological indices for PE.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA1641.0001.4142.8285.0001.3331.33316.0001.4141.88621081.2501.9144.8287.0001.8332.33324.0002.1212.886318161.7502.9148.82811.0002.8334.33340.0003.5364.886534322.7504.91416.82819.0004.8338.33372.0006.3648.886858564.2507.91428.82831.0007.83314.333120.00010.60714.8861074725.2509.91436.82839.0009.83318.333152.00013.43518.886Table 3Degree-based topological indices for PP (identical to PVC by Remark 2.4).n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA1641.0001.4142.8285.0001.3331.33316.0001.4141.886220181.5832.7709.32813.3332.5674.36730.7503.7544.655334332.2504.16415.95921.0003.8677.51750.1255.9857.480562633.5836.95229.22036.3336.46713.81788.87510.44713.13181041085.58311.13348.61259.33310.36723.267147.00017.14021.607101321386.91714.02161.87374.66712.96729.567185.75021.60227.257Table 4Degree-based topological indices for PS.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA134362.0003.93216.76317.0003.8678.26764.0005.6577.882276843.6947.86037.42936.3337.73318.450134.76612.09016.74531181335.47211.82758.22755.00011.66728.750210.15618.41325.66452022319.02819.76099.82292.33319.53349.350360.93831.06143.502832838014.36131.660161.815148.33331.33380.250587.10950.03370.2591041247917.91739.594203.411185.66739.200100.850737.89162.68188.097Table 5Degree-based topological indices for Nylon-6,6.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA160594.1677.80829.45932.6677.63314.483115.37510.71614.71121281298.00015.59662.72268.00015.23330.783234.12522.24830.362319619911.83323.38395.984103.33322.83347.083352.87533.78146.014533233919.50038.959162.507174.00038.03379.683590.37556.84677.316853654930.83362.321262.293279.33360.633128.583946.62591.444124.2701067268938.50077.897328.816349.66775.833161.1831184.125114.510155.573Table 6Degree-based topological indices for PET.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA164713.3066.64730.85833.3336.33314.917104.90610.14713.44021341516.44413.41865.01967.00012.90031.617222.43820.89128.05132042319.58320.18999.180100.66719.46748.317339.96931.63642.662534439115.86133.730167.501168.00032.60081.717575.03153.12571.883855463125.27854.042269.463268.66752.300131.417927.62585.359115.7151069479131.55667.583337.784335.66765.433164.8171163.156106.849145.137 Table 2Degree-based topological indices for PE.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA1641.0001.4142.8285.0001.3331.33316.0001.4141.88621081.2501.9144.8287.0001.8332.33324.0002.1212.886318161.7502.9148.82811.0002.8334.33340.0003.5364.886534322.7504.91416.82819.0004.8338.33372.0006.3648.886858564.2507.91428.82831.0007.83314.333120.00010.60714.8861074725.2509.91436.82839.0009.83318.333152.00013.43518.886 Degree-based topological indices for PE. Table 3Degree-based topological indices for PP (identical to PVC by Remark 2.4).n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA1641.0001.4142.8285.0001.3331.33316.0001.4141.886220181.5832.7709.32813.3332.5674.36730.7503.7544.655334332.2504.16415.95921.0003.8677.51750.1255.9857.480562633.5836.95229.22036.3336.46713.81788.87510.44713.13181041085.58311.13348.61259.33310.36723.267147.00017.14021.607101321386.91714.02161.87374.66712.96729.567185.75021.60227.257 Degree-based topological indices for PP (identical to PVC by Remark 2.4). Table 4Degree-based topological indices for PS.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA134362.0003.93216.76317.0003.8678.26764.0005.6577.882276843.6947.86037.42936.3337.73318.450134.76612.09016.74531181335.47211.82758.22755.00011.66728.750210.15618.41325.66452022319.02819.76099.82292.33319.53349.350360.93831.06143.502832838014.36131.660161.815148.33331.33380.250587.10950.03370.2591041247917.91739.594203.411185.66739.200100.850737.89162.68188.097 Degree-based topological indices for PS. Table 5Degree-based topological indices for Nylon-6,6.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA160594.1677.80829.45932.6677.63314.483115.37510.71614.71121281298.00015.59662.72268.00015.23330.783234.12522.24830.362319619911.83323.38395.984103.33322.83347.083352.87533.78146.014533233919.50038.959162.507174.00038.03379.683590.37556.84677.316853654930.83362.321262.293279.33360.633128.583946.62591.444124.2701067268938.50077.897328.816349.66775.833161.1831184.125114.510155.573 Degree-based topological indices for Nylon-6,6. Table 6Degree-based topological indices for PET.n\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-\frac{1}{2}}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{\frac{1}{2}}$$\end{document}SDDHISAZABCGA164713.3066.64730.85833.3336.33314.917104.90610.14713.44021341516.44413.41865.01967.00012.90031.617222.43820.89128.05132042319.58320.18999.180100.66719.46748.317339.96931.63642.662534439115.86133.730167.501168.00032.60081.717575.03153.12571.883855463125.27854.042269.463268.66752.300131.417927.62585.359115.7151069479131.55667.583337.784335.66765.433164.8171163.156106.849145.137 Degree-based topological indices for PET. Closed-form expressions for topological indices By substituting the edge partition counts from (4)–(13) into the definitions of the topological indices, we obtain explicit formulas as functions of n. Corollary 4.1 (PE Indices) For the PE chain with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document}:15\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M_1&= 2(1+2) + (2n-3)(2+2) = 8n - 6, \end{aligned}$$\end{document}16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M_2&= 2(1 \cdot 2) + (2n-3)(2 \cdot 2) = 8n - 8, \end{aligned}$$\end{document}17\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} {}^mM_2&= \frac{2}{1\cdot 2} + \frac{2n-3}{2\cdot 2} = \frac{2n+1}{4}, \end{aligned}$$\end{document}18\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} H&= \frac{2\cdot 2}{1+2} + \frac{(2n-3)\cdot 2}{2+2} = \frac{4}{3} + \frac{2n-3}{2} = n - \frac{5}{6}. \end{aligned}$$\end{document} Corollary 4.2 (PP/PVC Indices) For PP (and PVC) with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n \ge 2$$\end{document}:19\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M_1&= 1\cdot 3 + n\cdot 4 + 1\cdot 4 + (2n-3)\cdot 5 = 14n - 8, \end{aligned}$$\end{document}20\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} M_2&= 1\cdot 2 + n\cdot 3 + 1\cdot 4 + (2n-3)\cdot 6 = 15n - 12. \end{aligned}$$\end{document} Table 7 summarizes the first Zagreb index for all six polymers.Table 7Closed-form expressions for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1(G)$$\end{document} as functions of n.Polymer\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\boldsymbol{M_1(G)}$$\end{document}PE\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$8n - 6$$\end{document}PP/PVC\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$14n - 8$$\end{document}PS\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$42n - 8$$\end{document}Nylon-6,6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$68n - 8$$\end{document}PET\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$70n - 6$$\end{document} Table 7Closed-form expressions for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1(G)$$\end{document} as functions of n.Polymer\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\boldsymbol{M_1(G)}$$\end{document}PE\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$8n - 6$$\end{document}PP/PVC\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$14n - 8$$\end{document}PS\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$42n - 8$$\end{document}Nylon-6,6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$68n - 8$$\end{document}PET\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$70n - 6$$\end{document} Closed-form expressions for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1(G)$$\end{document} as functions of n. Corollary 4.3 (General Observations) For all six polymer chains, every degree-based topological index is a linear function of the number of repeating units n, i.e., of the form \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha n + \beta$$\end{document} for constants \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha , \beta$$\end{document} depending on the polymer type and the specific index. The slope \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} is determined by the edge contributions from a single interior repeating unit, while the intercept \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\beta$$\end{document} reflects terminal corrections. Graphical analysis In this section, we present graphical representations of the M-polynomials and comparative plots of the topological indices. 3D surface plots of M-polynomials Figure 2 shows the three-dimensional surface plots of the M-polynomials for each polymer evaluated at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n = 5$$\end{document}. These surfaces illustrate the bivariate behavior of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M(G;\,x,y)$$\end{document} as functions of x and y over the domain \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$[0.1, 2.0]^2$$\end{document}.Fig. 23D surface plots of M-polynomials for all six polymers at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n = 5$$\end{document}. 3D surface plots of M-polynomials for all six polymers at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n = 5$$\end{document}. Comparative analysis of topological indices Figure 3 presents a comprehensive comparison of six selected topological indices (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}, SDD, H, AZ) across all six polymers as functions of the chain length n. The plots confirm the linear growth of all indices with n (Corollary 4.3) and clearly illustrate the structural complexity ordering established in Section 6.Fig. 3Comparative analysis of degree-based topological indices for all six polymer chains as functions of the number of repeating units n. Comparative analysis of degree-based topological indices for all six polymer chains as functions of the number of repeating units n. Discussion The results obtained in this study reveal several important structural and topological relationships among the six polymer classes investigated. Structural complexity ordering For all computed topological indices and all values of n, we observe a consistent ordering:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {PE} \;<\; \text {PP} = \text {PVC} \;<\; \text {PS} \;<\; \text {Nylon-6,6} \;\lesssim \; \text {PET},$$\end{document}with minor variations for some indices. This ordering reflects the increasing structural complexity of the monomer units, from the simple two-carbon backbone of PE to the aromatic ring-containing PET with its ester linkages and multiple heteroatoms. Graph-theoretic equivalence of PP and PVC A notable result is the exact equality of all topological indices for PP and PVC at every chain length (Remark 2.4). This arises from the topological equivalence of their hydrogen-suppressed molecular graphs: both have a pendant atom of degree 1 at each alternate backbone carbon, regardless of whether it is a methyl carbon or a chlorine atom. This demonstrates that degree-based topological indices, by construction, cannot distinguish between chemically distinct but topologically equivalent structures. To differentiate such polymers, one would need to employ weighted molecular graphs or atom-type-specific descriptors2. Linear growth behavior All topological indices grow linearly with the number of repeating units n (Corollary 4.3), which is expected for linear polymer chains. The slope of this linear relationship is determined by the structural complexity of the monomer and the distribution of vertex degrees, as confirmed by the comparative plots in Figure 3. PET exhibits the steepest growth rate for most indices due to its large monomer unit (14 heavy atoms) containing an aromatic ring, ester linkages, and carbonyl groups. Role of aromatic rings Polymers containing aromatic rings (PS and PET) exhibit significantly higher topological index values compared to their aliphatic counterparts. The phenyl ring in PS contributes 6 additional heavy atoms and 7 additional bonds per monomer, creating a substantial increase in all indices. The para-disubstituted benzene ring in PET introduces degree-3 vertices that further enhance the topological complexity. Sensitivity of different indices The augmented Zagreb index (AZ) shows the greatest sensitivity to structural changes, exhibiting the largest numerical range across the polymer series. This is due to its cubic dependence on the edge-weight function. In contrast, the harmonic index (H) and the modified second Zagreb index (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}) show relatively modest variations, making them less discriminating for structural comparisons. M-polynomial surface analysis The 3D surface plots of the M-polynomials (Figure 2) reveal distinct topographic features for each polymer. Polymers with edges connecting higher-degree vertices (e.g., PET with its (3, 3) edges) show steeper surfaces at higher x and y values. The surface complexity increases with the number of distinct edge types in the partition, with PET showing the most complex surface due to its five distinct edge types. Relevance to QSPR and QSAR studies The topological indices computed in this work have well-established connections to physicochemical properties that are directly relevant for polymer characterization: (i)First Zagreb index \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy: The first Zagreb index was shown by Gutman and Trinajstić1 to be related to the total \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy of molecules. For conjugated polymers (e.g., PS and PET with aromatic rings), the higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} values correlate with greater electron delocalization and thus lower band gaps29.(ii)Randić index and thermodynamic properties: The Randić index6has been demonstrated to correlate strongly with boiling points, surface areas, and enthalpies of formation. Hayat et al4. recently demonstrated that connectivity-based indices show significant correlations (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R^2> 0.95$$\end{document}) with physicochemical properties of monocarboxylic acids through regression analysis. The computed Randić indices for our polymer series can serve as independent variables in analogous regression models for polymer properties such as glass transition temperature (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_g$$\end{document}), melting point, and density.(iii)ABC index and enthalpy of formation:Estrada et al7. established that the atom-bond connectivity index models the enthalpy of formation of alkanes with high accuracy. The linear dependence of ABC on n that we observe for each polymer provides a basis for predicting per-monomer enthalpy contributions in polymerization thermodynamics.(iv)Hyper-Zagreb index and regression modeling:As demonstrated by Hayat et al5., degree-based topological indices of graph-theoretic structures can be effectively used in regression modeling for QSPR studies, achieving strong predictive correlations with experimental data.(v)SDD index and molecular branching: The symmetric division degree index captures the heterogeneity of vertex degrees across edges. The larger SDD values for branched polymers (PP, PS) compared to linear PE reflect greater topological irregularity, which correlates with reduced crystallinity and lower density in physical polymers. (i)First Zagreb index \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy: The first Zagreb index was shown by Gutman and Trinajstić1 to be related to the total \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy of molecules. For conjugated polymers (e.g., PS and PET with aromatic rings), the higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} values correlate with greater electron delocalization and thus lower band gaps29. First Zagreb index \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy: The first Zagreb index was shown by Gutman and Trinajstić1 to be related to the total \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}-electron energy of molecules. For conjugated polymers (e.g., PS and PET with aromatic rings), the higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document} values correlate with greater electron delocalization and thus lower band gaps29. (ii)Randić index and thermodynamic properties: The Randić index6has been demonstrated to correlate strongly with boiling points, surface areas, and enthalpies of formation. Hayat et al4. recently demonstrated that connectivity-based indices show significant correlations (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R^2> 0.95$$\end{document}) with physicochemical properties of monocarboxylic acids through regression analysis. The computed Randić indices for our polymer series can serve as independent variables in analogous regression models for polymer properties such as glass transition temperature (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_g$$\end{document}), melting point, and density. Randić index and thermodynamic properties: The Randić index6has been demonstrated to correlate strongly with boiling points, surface areas, and enthalpies of formation. Hayat et al4. recently demonstrated that connectivity-based indices show significant correlations (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R^2> 0.95$$\end{document}) with physicochemical properties of monocarboxylic acids through regression analysis. The computed Randić indices for our polymer series can serve as independent variables in analogous regression models for polymer properties such as glass transition temperature (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_g$$\end{document}), melting point, and density. (iii)ABC index and enthalpy of formation:Estrada et al7. established that the atom-bond connectivity index models the enthalpy of formation of alkanes with high accuracy. The linear dependence of ABC on n that we observe for each polymer provides a basis for predicting per-monomer enthalpy contributions in polymerization thermodynamics. ABC index and enthalpy of formation:Estrada et al7. established that the atom-bond connectivity index models the enthalpy of formation of alkanes with high accuracy. The linear dependence of ABC on n that we observe for each polymer provides a basis for predicting per-monomer enthalpy contributions in polymerization thermodynamics. (iv)Hyper-Zagreb index and regression modeling:As demonstrated by Hayat et al5., degree-based topological indices of graph-theoretic structures can be effectively used in regression modeling for QSPR studies, achieving strong predictive correlations with experimental data. Hyper-Zagreb index and regression modeling:As demonstrated by Hayat et al5., degree-based topological indices of graph-theoretic structures can be effectively used in regression modeling for QSPR studies, achieving strong predictive correlations with experimental data. (v)SDD index and molecular branching: The symmetric division degree index captures the heterogeneity of vertex degrees across edges. The larger SDD values for branched polymers (PP, PS) compared to linear PE reflect greater topological irregularity, which correlates with reduced crystallinity and lower density in physical polymers. SDD index and molecular branching: The symmetric division degree index captures the heterogeneity of vertex degrees across edges. The larger SDD values for branched polymers (PP, PS) compared to linear PE reflect greater topological irregularity, which correlates with reduced crystallinity and lower density in physical polymers. Basis for systematic topological characterization Our claim of providing a systematic topological characterization of common polymer structures is grounded in the following observations. First, the M-polynomial encodes the complete degree-based structural information of the molecular graph, and any degree-based topological index can be extracted from it. Second, the eleven indices computed span a diverse set of mathematical operations (sums, products, ratios, roots, powers) applied to vertex degrees, thereby capturing different aspects of the molecular graph topology2. Third, the consistent ordering across all eleven indices and all chain lengths suggests that this ordering reflects genuine structural differences rather than artifacts of any particular index definition. Finally, the linear formulas we provide (Table 7 and Corollaries 4.1–4.2) enable direct computation of index values for any chain length, and could serve as candidate descriptors in subsequent QSPR regression studies3–5 once paired with experimental polymer property datasets. Potential applications and societal relevance The six polymers studied in this work collectively account for a substantial fraction of global plastic production. Within the graph-theoretic scope of this study, the topological characterizations we provide may offer the following potential applications, which we present as directions for future empirical work rather than as established outcomes of the present analysis: (i) the computed indices could, in principle, serve as candidate structural descriptors in subsequent regression or machine-learning studies aimed at predicting polymer properties, subject to validation against experimental data; (ii) the structural complexity ordering provides a graph-theoretic reference that may inform comparative studies of polymer alternatives; (iii) the topological signatures of commodity plastics may complement other descriptors used in environmental science research on polymer degradation, though such connections require independent verification; and (iv) the closed-form expressions in n enable straightforward computation of index values for any chain length, which could support future screening or correlation studies. We emphasize that the present work is purely graph-theoretic, and any property-prediction, polymer-design, or machine-learning application would require dedicated experimental and statistical validation beyond the scope of this paper. Conclusions In this paper, we have computed the M-polynomials and eleven degree-based topological indices for six commercially important synthetic polymers modeled as linear chains of n repeating monomer units using hydrogen-suppressed molecular graphs. The main contributions are: (i)General closed-form M-polynomial expressions for PE, PP, PVC, PS, Nylon-6,6, and PET as explicit functions of the chain length parameter n (Theorems 2.1–2.7).(ii)Computation of eleven degree-based topological indices (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1/2}$$\end{document}, SDD, H, IS, AZ, ABC, GA) for all six polymers, expressed as functions of n.(iii)Graphical analysis including 3D surface plots of M-polynomials (Figure 2) and comparative 2D plots of topological indices (Figure 3).(iv)Identification of the structural complexity ordering \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {PE}< \text {PP} = \text {PVC}< \text {PS} < \text {Nylon-6,6} \lesssim \text {PET}$$\end{document}, which is consistent across all computed indices.(v)Demonstration that PP and PVC are topologically equivalent in the hydrogen-suppressed representation, yielding identical M-polynomials and topological indices (Remark 2.4).(vi)Discussion of the relevance of the computed indices to QSPR/QSAR studies for predicting physicochemical properties of polymers, building on recent work demonstrating the predictive power of degree-based indices3–5.These results provide a systematic topological characterization of common polymer structures that may, in conjunction with experimental data, inform future QSPR/QSAR studies of physicochemical properties. Within the present graph-theoretic scope, we do not perform property prediction directly; such applications are left for dedicated follow-up work that pairs these descriptors with experimental datasets. Future work may also extend this approach to branched, cross-linked, and copolymer architectures, as well as to distance-based topological indices such as the Wiener index29 and eccentricity-based indices. (i)General closed-form M-polynomial expressions for PE, PP, PVC, PS, Nylon-6,6, and PET as explicit functions of the chain length parameter n (Theorems 2.1–2.7). General closed-form M-polynomial expressions for PE, PP, PVC, PS, Nylon-6,6, and PET as explicit functions of the chain length parameter n (Theorems 2.1–2.7). (ii)Computation of eleven degree-based topological indices (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1/2}$$\end{document}, SDD, H, IS, AZ, ABC, GA) for all six polymers, expressed as functions of n. Computation of eleven degree-based topological indices (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_1$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$M_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${}^mM_2$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{-1/2}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1/2}$$\end{document}, SDD, H, IS, AZ, ABC, GA) for all six polymers, expressed as functions of n. (iii)Graphical analysis including 3D surface plots of M-polynomials (Figure 2) and comparative 2D plots of topological indices (Figure 3). Graphical analysis including 3D surface plots of M-polynomials (Figure 2) and comparative 2D plots of topological indices (Figure 3). (iv)Identification of the structural complexity ordering \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {PE}< \text {PP} = \text {PVC}< \text {PS} < \text {Nylon-6,6} \lesssim \text {PET}$$\end{document}, which is consistent across all computed indices. Identification of the structural complexity ordering \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {PE}< \text {PP} = \text {PVC}< \text {PS} < \text {Nylon-6,6} \lesssim \text {PET}$$\end{document}, which is consistent across all computed indices. (v)Demonstration that PP and PVC are topologically equivalent in the hydrogen-suppressed representation, yielding identical M-polynomials and topological indices (Remark 2.4). Demonstration that PP and PVC are topologically equivalent in the hydrogen-suppressed representation, yielding identical M-polynomials and topological indices (Remark 2.4). (vi)Discussion of the relevance of the computed indices to QSPR/QSAR studies for predicting physicochemical properties of polymers, building on recent work demonstrating the predictive power of degree-based indices3–5. Discussion of the relevance of the computed indices to QSPR/QSAR studies for predicting physicochemical properties of polymers, building on recent work demonstrating the predictive power of degree-based indices3–5.