Highly Stereoselective (3+2) Cycloadditions of Levoglucosenone (LGO) with the In Situ-Generated Thiocarbonyl S-Methanides (Thiocarbonyl Ylides) Derived from Aromatic and Cycloaliphatic Thioketones † Authors: Grzegorz Mlostoń, Małgorzata Celeda, Marcin Palusiak, Heinz Heimgartner, Zbigniew J. Witczak Published: 2026 ABSTRACT The in situ-generated thiocarbonyl S-methanides derived from cycloaliphatic thioketones undergo (3+2) cycloaddition onto the C=C bond of levoglucosenone yielding anticipated, polycyclic tetrahydrothiophene derivatives in a regio- and stereoselective manner. The cycloaddition process occurred stereoselectively via the less hindered exo-face approach; exo-diastereoisomers were formed in all studied reactions. Some of the obtained crystalline (3+2) cycloadducts were studied by the monocrystal X-ray diffraction analysis, which unambiguously confirmed the postulated structure. Stable (3+2) cycloadducts were isolated in good yields (50–80%). 1. Introduction In the recent decades (–)-levoglucosenone (1) (LGO, Figure 1) (systematic name: 1,6-anhydro-3,4-dideoxy-β-D-glycero-hex-3-enopyranos-2-ulose or (1S,5R)-6,8-dioxabicyclo [3.2.1]oct-2-en-4-one), obtained for the first time in 1979 by pyrolysis of cellulose in the presence of H3PO4 [1], attracts great attention as an exceptional chiral molecule and bioisoster useful for the design of diverse bioactive compounds [2,3,4,5,6] and for the construction of wireless data communication devices [7]. Due to the rapidly growing demand for large-scale applications, industrial methods for fabrication of 1, including biotechnological processes, have also been developed and they are summarized in a recent review [8]. The presence of the α,β-unsaturated ketone unit allows 1 to be applied as a versatile reagent for cycloadditions and in recent years it was explored both in Diels–Alder reactions with cyclic and acylic dienes [9,10,11] as well as in 1,3-dipolar cycloadditions with nitrile imines [12,13], nitrile oxides [12], nitrones [12,14], and with diazomethane [15]. In a very recent publication, the first (8+2) higher order cycloaddition (HOC) of 1 with tropothione was also described as a diastereoselective process [16]. The results of the (3+2) cycloadditions of 1 with various 1,3-dipoles, which are summarized in Scheme 1, demonstrate that the reported reactions occurred with different regio- and face-selectivity. Notably, no (3+2) cycloaddition of 1 with any of the known S-centered 1,3-dipole (thiocarbonyl S-methanide, thiocarbonyl S-sulfide, thiocarbonyl S-oxide, or thiocarbonyl S-imide) has been reported to date. Thiocarbonyl S-methanides 2 belong to the class of the electron-rich, so-called ‘S-centered 1,3-dipoles’, and their utility for a straightforward synthesis of various sulfur heterocycles was demonstrated in numerous publications [17,18]. In contrast to stable, push-pull-stabilized (and not reactive) thiocarbonyl ylides they can conveniently be generated as reactive intermediates via thermal decomposition of 1,3,4-thiadiazolines 3, which are accessible via (3+2) cycloaddition of diazomethane and its derivatives with thiocarbonyl compounds such as thioketones or dithioesters (Scheme 2) [17,18,19]. In the presence of an activated C=C dipolarophile they are trapped according to the rules of (3+2) cycloadditions yielding the corresponding tetrahydrothiophene derivatives [17,18]. Interestingly, thiocarbonyl S-methanides 2 smoothly react with α,β-unsaturated ketones activated by the strongly electron-withdrawing CF3-group and the regioselectivity of the (3+2) cycloaddition depended on the localization of the CF3 group. The five-membered cycloadducts formed with complete regioselectivity as sole products in these reactions were identified as tetrahydrothiophene (from (b)) or 1,3-oxathiolane (from (a)) derivatives, respectively (Scheme 2) [20]. The intriguing regioselectivity observed in these reactions with enones bearing the strongly electron-withdrawing CF3 moiety was the subject of a recent, theoretical study which predicted the experimentally observed chemoselectivity [21]. Noteworthy, the S-CH2 terminus displays both basic and nucleophilic properties, which were demonstrated in some reactions of adamantanethione S-methanide (2a) [22]. On the other hand, in the absence of a reactive dipolarophile, thiocarbonyl S-methanides undergo an intramolecular cyclization to form thiiranes (as in the case of cycloaliphatic thiocarbonyl S-methanides) or dimerize in a characteristic, regioselective manner yielding sterically crowded tetraaryl-1,4-dithiane derivatives (as in the case of aromatic S-methanides, e.g., thiobenzophenone or thiofluorenone S-methanides) [23,24]. A mechanistically interesting, first case of a non-concerted, stepwise cycloaddition, was encountered in the reactions of sterically crowded thiocarbonyl S-methanides derived from cyclobutanethiones with strongly electron-deficient ethylenes such as dimethyl dicyanofumarate [25] or dimethyl 1,2-bis(trifluoromethyl)-1,2-di(methoxycarbonyl)ethylene [26,27]. Unexpectedly, in both cases seven-membered ketenimines were postulated as initial products of the stepwise (5+2) cycloaddition. Moreover, in the latter case, due to the stabilizing effect of the ‘magic’ CF3 group, the strained seven-membered ketenimine could be isolated and identified not only by means of spectroscopic methods, but also by the single-crystal X-ray diffraction analysis [27]. In spite of the great importance of α,β-unsaturated ketones as versatile synthons, widely applied in organic synthesis (Michael additions, electrophilic additions, cycloaddition reactions, etc.) [28], no applications for the synthesis of thiophene derivatives via (3+2) cycloadditions with thiocarbonyl S-methanides are known. It is worth stressing that to date, in contrast to numerous C=C dipolarophiles presented in Scheme 2, no cycloadditions of thiocarbonyl S-methanides 2 with α,β-unsaturated ketones (except the CF3-group-activated representatives depicted in Scheme 2) have been reported. The main goal of the present study was the examination of the reactivity of levoglucosenone (1), as a representative of non-enolizable, cyclic α,β-unsaturated ketones, towards thiocarbonyl S-methanides 2, and the stereoselectivity (both regio- and face-selectivity) of the anticipated (3+2) cycloaddition was of special interest. For comparison reasons, the reactivity of some typical enones, like chalcone 4, towards the in situ-generated thiocarbonyl S-methanides 2, should also be tested. 2. Results and Discussion Regardless of the fact that (3+2) cycloadditions of thiocarbonyl S-methanides 2 with diverse C=C dipolarophiles were widely studied and described in detail in numerous publications, e.g., [17,18], reactions with α,β-unsaturated ketones (enones) are limited to the CF3-activated derivatives presented in Scheme 2 [20,21]. For a better insight into the reactivity of thiocarbonyl S-methanides 2 towards non-activated enones, their reactions with chalcones should be examined within a preliminary study. The goal of this study was the examination of the reactivity of 2 towards typical enones and the influence of the steric hindrance in the 1,3-dipole on the course of the (3+2) cycloaddition was also of interest. In the initial stage of the study, nearly equimolar amounts of chalcone 4 and the well-known S-methanide precursor 2a (i.e., D3-2,5-dihydro-1,2,4-thiadiazoline 3a) were applied to test the reaction performed under typical conditions, i.e., in THF solution at 45 °C (Scheme 3) [22,29]. After ca. 4h, the evolution of N2 was complete and after removal of the solvent, the crude product was analyzed by running the 1H NMR. Four equally intense singlets found at 0.92, 1.11, 1.22, and 1.34 ppm, along with two multiplets at 3.11–3.18 and 3.30–3.37 ppm, were attributed to the CH2 group, thereby suggesting the formation of a single cycloadduct. In addition, the presence of the doublet (2JH,H = 6 Hz) found at 3.70 ppm, which could be attributed to HC(3) (but not to HC(4)), proved the presence of the regioisomer 5a (and not the alternative 5’a). Along with signals of cycloadduct 5a, the 1H NMR also showed the distinct peaks of the known thiirane 6a, which were found at 1.13 (s, 2Me), 1.22 (s, 2Me), and 2.59 (s, H2C) ppm, respectively. Based on comparison of the intensities of integration lines of the corresponding signals, the ratio of 5a (minor) and 6a (major) could be estimated to ca. 3:7. Thus, formation of thiirane 6a as the major product demonstrated that the ring closure of the intermediate 2a is faster than the (3+2) cycloaddition leading to 5a. Chromatographic separation of the crude mixture of products led to isolation of the pure thiolane 5a as a colorless, thick oil in 22% yield. Thiirane 6a was isolated by PLC as a less polar fraction, contaminated with some amounts of the unconsumed chalcone. Similar experiments with the sterically more crowded thiocarbonyl S-methanides 2b and 2c were performed at higher temperature (65 °C, toluene) (Scheme 3). These experiments showed that in the first case the amounts of the cycloadduct 5b was substantially reduced (in comparison to 5a) and the isolated yield of the pure compound was calculated to be 11% only. Finally, in the case of the sterically overcrowded 2c, no (3+2) cycloaddition occurred, and the only product observed in this experiment was the corresponding thiirane 6c [29]. In contrast, the attempted trapping of the in situ-generated adamantanethione S-methanide (2d) with chalcone 4 occurred with complete regioselectivity and led to the expected (3+2) cycloadduct 5d. The 1H NMR analysis with a weighted portion of the concentration standard (1,1,2,2-tetrachloroethane) allowed determination of its yield to 38%. After chromatographic separation it could be isolated as a pure compound and subsequent crystallization from hexane/CH2Cl2 gave analytically pure, colorless crystals with m.p. 120–122 °C in 19% yield. Finally, the trapping experiment with 4 using thiobenzophenone S-methanide (2e) was carried out at low temperature (−45 °C) following the known methodology elaborated some time ago by R. Huisgen et al. (Scheme 3) [30]. The yield of the (3+2) cycloadduct 5e was also determined in the crude mixture after addition of a weighted portion of 1,1,2,2-tetrachloroethane and it was calculated to be 22%. However, in contrast to the earlier described experiments, neither crystallization nor chromatographic separation allowed isolation of 5e in a pure form, without contamination with unconsumed chalcone 4. In a brief comment to this initial part of the study, one could conclude that, the in situ-generated thiocarbonyl S-methanides 2 display a moderate reactivity towards the C=C bond of chalcone 4 acting in these reactions as a model dipolarophile, representing the class of α,β-unsaturated ketones. At ambient conditions, levoglucosenone (LGO) (1) exists as a thick oil, which is well soluble in organic solvents such as THF or toluene, and therefore all experiments with the in situ-generated 1,3-dipoles 2 could be performed under conditions applied for the reactions with the model chalcone 4 presented in Scheme 3. However, keeping in mind the moderate yields of the obtained/isolated cycloadducts 5, the reactions with LGO 1 were carried out with precursors 3 used in a reasonable excess and the molar ratio of substrates 1 and 3 (LGO/precursor) was established at 1:3. The first experiment of this series was performed in THF by heating 1 and 3a at 45 °C. When the evolution of N2 was complete, the solvent was evaporated and the oily residue was analyzed by running the 1H NMR. The analysis of the registered signals revealed that 1 was completely consumed, and therefore, the characteristic singlet, existing in the 1H NMR spectrum (CDCl3 solution) of 1 at 5.80 ppm, could not be found. Instead, a new singlet appeared at 5.14 ppm and it could be attributed to the anticipated (3+2) cycloadduct 7a. However, the best diagnostic signals [25] for its formation were two multiplets identified as dd, located at 3.15 and 2.80 ppm, attributed to the absorption of -H2C-S group of the tetrahydrothiophene ring. Importantly, there were no other signals observed which could suggest the formation of an isomeric product (Scheme 4). Isolation of the single (3+2) cycloadduct formed in this reaction was achieved by chromatography which delivered colorless crystals (86% yield) and the anticipated exo-7a structure was unambiguously confirmed by the X-ray diffraction analysis (Figure 2, Supplementary Material). The conformation of the thiolane (tetrahydrothiophene, THT) ring has attracted the attention of researchers for a long time because it is incorporated in the structure of numerous natural compounds and pharmaceutically relevant organic compounds, e.g., biotin [31]. Therefore, its structural details were studied both in the gas phase as well as in the crystalline phase [32]. Whereas the twist conformation (C2) is preferred in the gas phase, the C1 symmetry (slightly distorted C2 symmetry) was reported for THT in the crystalline phase [33]. In the case of exo-7a and two more thiolanes exo-7b, and exo-7d (see Supplementary Material), which were characterized by X-ray measurement, the five-membered heterocyclic thiolane ring adopts the envelope conformation, with the carbon atom C(2) at the top, and the other four atoms lying in the common plane (Figure 1, Scheme 4). Apparently, this conformation results from the rigid structure of the levoglucosenone based, polycyclic system. The correct attribution of signals of the H, and C atoms forming four stereogenic centers HC(7’), HC(4’), HC(3a’), and HC(8a’) was achieved based on the registered 2D spectra such as HMQC and COSY (see Supplementary Material, pp. 17, 18). The successful experiment with 2a prompted us to test other in situ-generated, more sterically crowded, thiocarbonyl S-methanides 2b–2d, derived from cycloaliphatic thioketones as 1,3-dipoles, in analogous (3+2) cycloadditions with levoglucosenone (1). In order to check the influence of the steric hindrance on the outcome of the cycloaddition process, two bulky representatives bearing bis spiro-cyclopentyl and bis spiro-cyclohexyl rings, i.e., 3b and 3c, respectively, were tested in reactions performed in toluene at 65 °C. In an earlier study both precursors were shown to undergo decomposition slower than the tetramethyl substituted precursor 3a, and therefore higher temperature was required to complete the N2 evolution from 3b and 3c, respectively, in a reasonable period of time [29]. To our surprise, the most sterically bulky 1,3-dipole 3c afforded the expected (3+2) cycloadduct 7c in high yield of 78%, and in the case of 3b, the yield of isolated 7b was slightly lower and calculated to be 54% (Scheme 5). A very comparable result was achieved starting with the precursor of adamantanethione S-methanide 2d. In this case, the yield of isolated (3+2) cycloadduct was calculated to 59% (Scheme 5). The 1H NMR spectra registered for the crude reaction mixtures proved the formation of single cycloadducts 7b–7d, which after chromatographic isolation were crystallized from hexane/CH2Cl2 solutions yielding crystals suitable for the single-crystal X-ray diffraction analysis, and the anticipated exo-structure was unambiguously confirmed in all cases (see Supplementary Material). Finally, two aromatic thiocarbonyl S-methanides 2e and 2f, derived from thiobenzophenone and thiofluorenone, respectively, were also used in the attempted (3+2) cycloadditions with levoglucosenone (1). It is well known, however, that in contrast to 2a–2d, the precursors 2e and 2f, i.e., 1,3,4-thiadiazolines 3e and 3f, respectively, undergo decomposition at low temperature, and typically ca. −45 °C (acetone/dry ice bath) is recommended to arrange optimized reaction conditions [23,24]. The experiment with 3e and 1 (molar ratio 3:1) afforded the expected cycloadduct 7e as a single product which could be isolated chromatographically in 81% yield as a pure compound. The spectroscopic data proved its structure and by analogy to 7a–7d the exo-orientation of the five-membered thiolane ring was also attributed to this polycyclic cycloadduct (Scheme 6). Notably, chemical shifts of the H and C atoms located at stereogenic CH centers in cycloadducts exo-7b–e were nearly identical with those found for the cycloadduct exo-7a, and therefore the attribution of the respective signals to these atoms can be performed by analogy with the latter cycloadduct. In contrast to 2e, its analog 2f, derived from thiofluorenone, did not react with 1 and instead underwent the so-called ‘head-to-head’ dimerization leading to the sterically crowded 1,4-dithiane 8 [23,30]. Apparently, under the applied reaction conditions, the (3+2) cycloaddition of 1 with 2f is a slow process, and a fast dimerization process of the latter, via a postulated 1,6-diradical intermediate [23], is the dominating pathway. In the final stage of the study a competition experiment comprising (3+2) cycloadditions of chalcone 4 and levoglucosenone (1) with the model thiocarbonyl S-methanide 2a was carried out in THF solution at 45 °C. In this case, decomposition of the precursor 3a (1 mol eq.) was performed in the presence of equimolar amounts of both dipolarophiles 1 and 4. After 3h, evolution of N2 was complete, and after evaporation of the solvent the crude mixture of products was analyzed by 1H NMR. Characteristic signals found in the high-field region between 0.90 and 1.41 ppm could be attributed to the diagnostic Me groups of three components identified as the (3+2) cycloadducts 7a (signals at 1.27, 1.31, 1.36, and 1.37 ppm) and 5a (signals at 0.92, 1.11, 1.22, and 1.34 ppm), as well as the thiirane 6a [25] (signals at 1.13, 1.22 ppm). Comparison of the intensities of well-separated CH3 signals clearly demonstrated that the molar ratio of compounds 5a:6a:7a was ca. 8:30:62. Thus, under the applied reaction conditions, the LGO (1) was ca. eight times more reactive in the (3+2) cycloaddition with 2a than the chalcone 4. Notably, the ring closure of 2a to form thiirane 6a was also faster than its (3+2) cycloaddition with 4 (Scheme 7). The mechanism of the (3+2) cycloadditions of the in situ-generated, reactive thiocarbonyl S-methanides 2 has intensively been discussed in the literature of the recent three decades, and one of the most intriguing reasons was the non-orthodox, stepwise mechanism in the case of reactions of electron-rich thiocarbonyl S-methanides with electron deficient ethylene dipolaropohiles [25,26,27]. For the reported (3+2) cycloadditions of levoglucosenone (1) with thiocarbonyl S-methanides 2, a concerted but rather non-synchronous mechanism can be postulated (Scheme 8). The obtained results and the structure of isolated cycloadducts 7 demonstrated that in the transition state the exo-face attack of the 1,3-dipoles onto the C=C bond governs the course of the reaction. It is noteworthy that in all 1,3-dipoles (S-methanides) 2 used in the study, there are no prochiral centers at the terminal C atoms, and therefore, irrespective of the mode of the attack (exo,exo- or exo,endo-) (see Scheme 8), the finally formed (3+2) cycloadduct 7 exists as a single exo-oriented diastereoisomer. 3. Materials and Methods General information: For general information see Supplementary Material. Reaction of 1,2-diphenylprop-3-en-2-one (4) with thiocarbonyl S-methanide 2a: A magnetically stirred solution of chalcone 4 (104 mg, 0.5 mmol) and 0.5 mmol (99 mg) of the precursor 3a in dry THF (1 mL) was heated in an oil bath at 45 °C. Evolution of N2 was controlled using a bubbler placed at the top of a 5 mL round-bottomed flask. When the evolution of N2 was finished, the solvent was evaporated in vacuo, and the oily residue was examined by 1H NMR. After this control, the mixture of crude products was purified on preparative LC plates using a mixture of hexane and CH2Cl2 (1:1) as the eluent. Cycloadduct 5a was isolated as viscous oil which solidified at r.t., and analytically pure samples were obtained by crystallization from hexane with a small admixture of CH2Cl2. trans-8-Benzoyl-1,1,3,3-tetramethyl-7-phenyl-5-thiaspiro [3.4]octan-2-one (5a). Yield: 42 mg (22%), colorless crystals, m.p. 117–119 °C (hexane/CH2Cl2). 1H-NMR (600 MHz, CDCl3): δ = 7.96 (d, 3JH,H = 6 Hz, 2H, 2HCar), 7.62–7.57 (m, 1H, HCar), 7.52–7.46 (m, 2H, 2HCar), 7.36–7.29 (m, 4H, 4HCar), 7.28–7.23 (m, 1H, HCar), 4.76 (d, 3JH,H = 6 Hz, 1H, HC(8)), 3.72–3.67 (m,1H, HC(7)), 3.37–3.30, 3.19–3.12 (2m, 2H, H2C(6)), 1.34, 1.22, 1.11, 0.92 (4s, 4CH3) ppm. 13C-NMR (151 MHz, CDCl3): δ = 221.9, 200.2 (2C=O), 140.8, 136.6 (2Car), 133.4, 127.4 (2HCar), 129.0, 128.8, 128.4, 127.6 (for 8HCar), 70.5, 66.2, 63.4 (3C), 60.4, (H2C(6), 54.1, 36.6 (2HC), 25.5, 23.2, 22.9, 21.4 (4CH3) ppm. EA: C24H26O2S (378.53) calcd.: C 76.15, H 6.92, S 8.47; found: C 76.13, H 6.88, S 8.67. Reaction of levoglucosenone (1) with thiocarbonyl S-methanide 2a: A magnetically stirred solution of 1 (63 mg, 0.5 mmol) and 1.5 mmol (297 mg) of the precursor 3a in dry THF (2 mL) was heated in an oil bath at 45 °C. Evolution of N2 was controlled using a bubbler placed at the top of a 5 mL round-bottomed flask. After 3h evolution of N2 was finished; next, the solvent was evaporated in vacuo, and the oily residue was examined by running 1H NMR. After this control registration, the mixture of crude products was purified on the preparative LC plates using CH2Cl2 as an eluent. Cycloadduct 7a was isolated as a colorless solid. An analytically pure sample was obtained by crystallization from hexane with a small admixture of CH2Cl2. (3a’S,4’S,7’R,8a’R)-2,2,4,4-Tetramethyl-3’H-spiro[cyclobutane-1,1’-[4,7]epoxythieno [3,4-d]oxepine]-3,8’(7’H)-dione (cycloadduct exo-7a). Yield: 128 mg (86%), colorless crystals, m.p. 170–171 °C (hexane/CH2Cl2). 1H-NMR (600 MHz, CDCl3): δ = 5.14 (s, 1H, HC(7’), 4.62 (m, 1H, HC(4’), 4.09–4.06 and 4.04–4.01 (2m, 2H), 3.69 (d, JH,H = 12 Hz, HC(3a’)), 3.16–3.12, 2.97–2.92 (2m, 2H, S-CH2-), 2.82–2.76 (m, 1H, HC(8a’)), 1.39, 1.37, 1.32, 1.28 (4s, 4Me) ppm. 13C-NMR (151 MHz, CDCl3): δ = 219.5, 199.2, 102.1 (C7’), 74.8 (C4’), 68.5, 66.8, 65.1, 61.2, 52.9 (C3a’), 50.6 (C8a’), 30.9, 23.7 (Me), 21.8 (Me), 21.2 (Me), 21.1 (Me). EA: C15H20O4S (296.38) calcd.: C 60.78, H 6.80, S 10.82; found: C 60.82, H 6.86, S 10.81. α20D = 77.86 [c = 0.3, CHCl3] 4. Conclusions The study demonstrated new opportunities for exploration of LGO (1) as an exceptional dipolarophile, considered as a carbohydrate derivative, representing the class of the cyclic endo-enones. It extends the current knowledge on the hitherto reported reactivity of LGO [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,33]. The obtained results demonstrated for the first time, that LGO can efficiently be used as a trapping reagent (dipolarophile) towards the reactive, in situ-generated, electron-rich, thiocarbonyl S-methanides, derived from the non-enalizable, cycloaliphatic thioketones. The aromatic analogs can be explored to a limited extent, and only in the case of thiobenzophenone S-methanide (2e) a satisfactory result could be achieved. All of the studied (3+2) cycloadditions occurred in a highly stereoselective manner and the five-membered thiolane ring of the target product was formed with full regio- and exo-face selectivity. The competition experiment performed with chalcone 4 and 1 proved that the latter, as a representative of α,β-unsaturated ketones, displays higher reactivity than its analog 4 towards electron-rich 1,3-dipoles such as thiocarbonyl S-methanides 2. Very likely, ring strain in 1 contributes to an enhanced reactivity of the C=C bond. In general, hitherto described methods aimed at synthesis of biologically active, sulfur-containing derivatives of levoglucosenone were focused on exploration of the thia-Michael addition of various thiols to the C=C group [34,35,36,37,38]. The now presented method of a new functionalization of the levoglucosenone skeleton with a tetrahydrothiophene ring may also be of interest in the future search for new, practically useful, bioactive glycomimetics [6,39] and fine reagents [8,40]. In addition, the described cycloadducts 7b–7d possess in their structure spiro-centers which frequently determine biological activity of some polycyclic, organic compounds [41,42].