Mixed-Mode Dynamic Stress Intensity Factors and Fracture Analysis Using Ordinary State-Based Peridynamics Authors: Yanyun Ru, Fei Li, Xingyu Li, Caidan Wang, Qianlong Yang, Shuqin Zheng, Lei Zhou, Xu Wang Published: 2026 ABSTRACT An ordinary state-based peridynamic (OSPD) approach combined with an interaction integral method is proposed to calculate dynamic stress intensity factors (DSIFs) and simulate crack propagation in two-dimensional cracked brittle solids. Numerical investigations are carried out for mode I and mixed-mode cracked plates under static, quasi-static, and dynamic loading conditions. A local damping scheme is incorporated into the peridynamic equations of motion to achieve convergence in static and quasi-static analyses. The influence of circular holes on DSIFs and crack propagation paths is systematically examined. Quantitative analyses of elastic deformation and quasi-static fracture behavior for mode I and mixed-mode cracks are verified through the uniaxial tension of a slab. The peak values of DSIFs exceed their static counterparts under dynamic loading. Complex dynamic fracture phenomena, including crack branching in both straight and inclined edge cracks, are successfully captured. The results obtained by the OSPD approach are validated through comparisons with theoretical benchmarks and finite element results, demonstrating high accuracy and effectiveness in calculating elastic deformation and stress intensity factors (SIFs), as well as accurately predicting crack propagation paths in quasi-static and dynamic fracture problems in brittle solids. Beyond the benchmark problems, the proposed OSPD approach is particularly well-suited for investigating more complex fracture systems. 1. Introduction Brittle fractures represent a major failure mode in engineering materials and structures, threatening structural integrity due to their sudden and catastrophic nature. Therefore, understanding crack propagation in brittle solids is essential across various engineering fields. However, accurate prediction of these processes remains challenging in solid mechanics, particularly when complex cracks are present, such as branching and multiple crack interactions. In classical continuum mechanics, materials are treated as continuums during deformation, and spatial partial derivatives are used to solve boundary value problems. In contrast, damage and failure analysis often involves discontinuities such as cracks and interfaces. Across these discontinuous surfaces, the derivatives of the displacement field become undefined or ill-suited, rendering the derivation of spatial differential equations difficult within the conventional framework. Various extended and enriched numerical methods have been proposed to overcome these limitations, such as the Extended Finite Element Method (XFEM) [1,2], the Cohesive Zone Method (CZM) [3,4], the Boundary Element Method (BEM) [5,6], the Meshfree Method (MFM) [7,8], and the Phase-Field Method (PFM) [9,10]. Although these special techniques offer several advantages for solving fracture problems, some challenges, such as dynamic fracture, multiple cracks, and fragmentation, remain in fracture modeling. Peridynamics (PD), introduced by Silling [11,12], is a nonlocal continuum theory that avoids classical continuum mechanics’ difficulties with discontinuities like cracks. In this approach, materials are modeled as interacting particles confined to a finite range (the horizon), and the governing equations take an integral form without spatial derivatives. Therefore, PD is well-suited for fracture problems with bond-based [13,14] and state-based [15,16] formulations. So far, the PD approach has effectively addressed various static and dynamic fracture cases, including damage in fibers [17] and membranes [18], the failure analysis of composites [19,20], crack branching in brittle materials [21,22,23], and the dynamic fracture of superconductors [24,25,26]. In addition, PD methods coupled with the FEM have also been presented [27,28,29]. Once stress intensity factors (SIFs) are determined, the static and dynamic fracture behavior of cracked bodies can be anticipated. Hence, precise SIF determination is essential for investigating crack propagation. Classical linear elastic fracture mechanics, pioneered by Griffith [30] and later formalized by Irwin [31] and Rice [32], provides a framework for analyzing cracked bodies using SIFs, energy release rates, and the J-integral. With a proper integral contour, one can compute the strain energy release rate and subsequently obtain the SIF. Yau [33] and Stern [34] established an interaction integral based on the J-integral to evaluate mixed-mode SIFs in 2D cracked plates. In the PD literature, studies on SIFs within the context of classical fracture mechanics remain limited. Hu [35] rigorously derived the J-integral formulation in bond-based peridynamics via the crack infinitesimal virtual extension method. Breitenfeld [36] proposed state-based peridynamics to evaluate numerical accuracy near the crack front. Panchadhara [37] introduced a post-processing method to extract SIFs from PD data. Le [38] proposed a method for correcting surface effects in PD. A new approach combining the displacement extrapolation method and peridynamic theory is presented by Zhu [39] to evaluate stress intensity factors. Zhang [40] developed a peridynamic virtual crack extension method to determine the energy release rate, where the virtual crack for crack propagation is constructed using uniquely applied directional and virtual broken bonds. Stenström [41] reformulated the J-area integral solely in terms of displacement variables, providing an alternative pathway for calculating the J-integral within the peridynamic framework. Le [42] established a simple computational scheme based on the virial theorem, using nodal tensile stresses to compute SIFs. However, the above studies focused on pure mode-I fractures, with few PD-based works addressing mixed-mode cases. Jung [43] used the PD J-integral to obtain mode-I/II SIFs for fatigue analysis. Zou [44] examined the J-integral under mixed-mode loads. A two-dimensional non-ordinary state-based peridynamics model based on three-body interaction potential is developed to simulate elastic brittle fracture behaviors for mixed-mode type fracture and crack dynamic branching cases [45]. Mirsayar [46] established a generalized approach to predict dynamic crack propagation by correlating the critical stretch with the critical strain energy release rate. The interaction integral has been used to extract mixed-mode DSIFs. Imachi [47] evaluated DSIFs for cracked solids with mixed-mode cracks. Dai [48] developed a PD shell model for mixed-mode SIFs under in-plane loading. This paper presents an OSPD approach for DSIFs evaluation and crack growth simulation. The OSPD model was applied to 2D brittle cracked solids under static, quasi-static, and dynamic loading conditions. Mixed-mode DSIFs are extracted via the interaction integral method. The paper is structured as follows. Section 2 introduces the OSPD theory. Section 3 presents the interaction integral method. Section 4 analyzes several numerical examples, comparing PD results with analytical solutions and FEM results. Section 5 provides the conclusions. 2. Peridynamic Theory 2.1. 2D OSPD Model PD uses particles and bonds to describe the materials. Particles interact only within a finite range referred to as the “horizon”; beyond it, no interaction occurs. In the OSPD theory, the equation of motion at point x takes the form of a nonlinear integro-differential equation [49]:(1)ρxu¨x,t=∫Hxfx,x′,u,u′,tdVx′+bx,t where ρx, u¨x,t, and bx,t denote the mass density, acceleration vector, and body force density of particle x, respectively. As shown in Figure 1, u and u′ are the displacement of particles x and x′. In the deformed state, the positions of x and x′ are described by the vectors y and y′. The region Hx defines the neighborhood of particle x within the horizon δ, typically taken as a circle centered at x in 2D problems. The force function f can be derived as [50]:(2)f=tη,ξ,t−t′η,ξ,t Here, ξ=x′−x and η=u′−u are the relative position vector and relative displacement vector, respectively. As illustrated in Figure 1, the force density vector t at particle x depends on all particles inside Hx. Similarly, particle x′ is also affected by the deformation of points within its own family Hx′. The force density vector can be rewritten as [51]:(3)t=2δΛξadθx+bμs×ξ+ηξ+η The failure parameter μ is a factor, and the discrete form of the dilatation θx is(4)θx=dδ∑x′=1NΛμsVx′ The peridynamic parameters a, d, and b are determined from isotropic expansion and simple shear. Under two-dimensional plane strain conditions with a unit thickness assumption, the peridynamic parameters are given as [52]:(5)a=4v−1E4(1−2v)(1+v), b=3E(1+v)πδ4, d=2πδ3 where E and v represent the Young’s modulus and Poisson’s ratio. The stretch s between particles x and x′ is(6)s=ξ+η−ξξ The scalar parameter Λ is defined as [51]:(7)Λ=ξ+ηξ+η⋅ξξ In order to compute stress components in PD, a collapsed peridynamic stress tensor field is introduced [53]:(8)σ=∫Hxt⊗ξdVx′ By combining Equations (2)–(4), the force function f can be rewritten as:(9)f=2δΛξadθx+θx′+2bμs×ξ+ηξ+η The parameter μ, which denotes bond breakage, is defined as [51]:(10)μξ,t=10s