Genetic diversity, population structure, and combined detection of selection signatures in Iranian versus Afghan Baluchi sheep Authors: Sadegh Taheri, Mohammad Osman Karimi, Naghmeh Saedi, Saeed Zerehdaran, Mohammad Mahdi Shariati, Mohsen Gholizadeh, Ali Javadmanesh, Muniyandi Nagarajan, Shamik Polley, Shamik Polley, Shamik Polley Published: 2026 ABSTRACT Selection to increase the frequency of useful mutations has left marks on animal genomes, genetic diversity, and population structure within populations. The study and investigation of these genomic regions can lead to the identification of genes related to economic traits or competence and adaptability. This study aimed to recognize genetic diversity, population structure, and selection signatures in Iranian (IB) and Afghan (AB) Baluchi sheep populations. In this study, 86 Iranian Baluchi and 15 Afghan Baluchi sheep were genotyped using Illumine Ovine SNP50K Beadchip arrays. Note that the sample size imbalance (IB n = 86 vs. AB n = 15) may reduce statistical power and potentially bias population structure and selection scan results. Additionally, use of the Ovine 50K array may introduce ascertainment bias; analyses were based on 38,193 shared SNPs, potentially missing population-specific variants. Generally, moderate genetic diversity was observed in both the Afghan Baluchi (AB) and Iranian Baluchi (IB) sheep populations, using various assessment methods. However, the IB population showed the lowest level of genetic diversity and the highest rate of linkage disequilibrium decay, despite having a better effective population size in recent generations. The ADMIXTURE analysis indicated that the optimal number of genetic clusters was K = 2, which was determined based on the lowest cross-entropy error of 0.603 observed during cross-validation. At K = 2 and NJ tree analysis, a clear genetic distinction between the AB and IB populations was evident. Additionally, the IB population demonstrated significant genetic uniformity when compared to the AB population in terms of genetic distance. Also, FST and XP-EHH were used to identify selection signatures. Some putative candidate genes for FST, including HDAC9, CSMD3, DAB1, FGF12, and PCDH9 were associated with important economic traits such as body weight, hot carcass weight, muscle weight in carcass, reproductive seasonality, and carcass fat percentage, respectively. Also, XP-EHH putative candidate genes were KCNIP4, FGF11, CNTROB, and ROBO2 in AB population, which were related to body weight, hot carcass weight, milk yield, and muscle weight in carcass. Moreover, XP-EHH putative candidate genes in IB population were GRIK3, NCOA1, and FGD3, that related to muscle weight in carcass, staple length, and milk fat percentage. Selection signals were identified using top 1% FST thresholds and XP-EHH without genome-wide multiple-testing correction; results require experimental validation. We observed very similar outcomes in terms of similar signatures related to economic traits in both FST and XP-EHH methods, indicating the robustness of analysis in this study. It can be concluded that selection has made a major distinction between Afghan and Iranian Baluchi sheep populations for reproduction, milk production, and growth traits. These could be due to the managed breeding programme in Iranian Baluchi sheep. Utilizing validated QTLs as described in this study could be applied to reveal the direction of breeding plans in livestock species. Introduction One of the primary grazing animals domesticated was sheep [1], due to its manageable size and the ability to adapt to various climates and poor nutrition diets. Artificial selection created a wide variety of breeds with respect to coat colour, distinct morphology, or particular production traits, among others. Natural selection (such as immunocompetence) has also put selection pressure on sheep. The Baluchi population, a major sheep breed in Iran regarding population size, is well-adapted to harsh climate conditions in central and eastern Iran with low-quality pastures. This breed is native to eastern and central regions of Iran, southwest of Pakistan, and southern Afghanistan. The fleece in Afghan Baluchi (AB) and Iranian Baluchi (IB) populations are coarse and white with black pigmentations at distal body parts (S1 Fig). Baluchi sheep is a fat-tailed breed, and it is very well adapted to a wide range of harsh environments and poor pasture quality in eastern Iran, a subtropical arid climate. Iranian Baluchi body size varies between 35 and 40 kg in adult ewes, milk yield between 40 and 50 kg in 125 days of milking, and annual greasy fleece weight of 1.3–1.8 kg (https://breeds.okstate.edu/sheep/baluchi-sheep.html). This breed has been under selection for important economic traits such as growth, milk production, etc in Abbas Abad Animal Breeding Centre, Mashhad, Iran, for more than four decades [2]. Also, the breeding of sheep in Afghanistan dates back to about 9000 years ago, when these valuable livestock species were domesticated [3]. As it is clear, around 2/3 of the population in Afghanistan is engaged in agriculture, particularly in the field of livestock [4]. Despite the importance of sheep production in Afghanistan, the lack of phenotypic records and accurate pedigree is the main issues that restrict the application of modern animal breeding programs. Afghan Baluchi fleece weight is around 1.3–2 Kg and the average body weight is 34–36 Kg (categorized as a meat-wool type breed). The average milk yield during the four months of a lactation period is about 40 Kg. It produces good-quality wool, suitable for carpet [4]. However, there is no evidence of breeding programs for Baluchi population in Afghanistan. It might be interesting to compare the impact of programmed and traditional selection methods on genomes of both populations, since it is believed that Iranian and Afghan Baluchi sheep populations has a common ancestor [5]. Both natural and artificial selection may have differential markers in specific genomic regions in domesticated animals. Therefore, the elucidation of certain genomic regions that show selection signatures may help to understand the process of biological selection and recognize potential candidate genes of interest [6]. Although the cost of genome sequencing is steadily decreasing, genotyping all individuals in a large population is still too expensive, which impedes the use of this technology. The SNP chip, which is a powerful tool for use in genetic studies, is a less expensive genotyping technology. A commercial 50K SNP chip for sheep genotyping became available in 2009 (http://www.illumina.com), providing a versatile, proficient, and cost-effective tool to detect positive selection signatures in the sheep genome [6,7]. Genetic diversity is a crucial aspect of overall biodiversity, alongside ecosystems and species, and is vital for the evolution of populations and species in the face of environmental and climatic changes. It also enhances the adaptability of animals to their habitats [8,9]. To preserve genetic diversity, it is essential to manage inbreeding and common ancestry, as noted by Gebreselase et al. [10]. However, in recent decades, traditional local breeding practices have declined due to the widespread use of commercial breeds specialized for production and heavy reliance on a limited number of rams, along with modern selection techniques [11]. Despite numerous studies focusing on genetic diversity and selection in sheep, Gorgol et al. point out a lack of genomic-level data on the genetic background and diversity of local sheep populations [12]. The presence of many local populations exhibiting distinct phenotypic differences warrants further research into their genetic differentiation. According to Meermans et al., local sheep breeds play an integral role in cultural heritage, are essential to local economies, possess unique traits adapted to regional climates, and are critical for sustainable and resilient agricultural systems [13]. The fixation index (FST) and cross-population extended haplotype heterozygosity test (XP-EHH) statistics are used to identify selection signatures within individual samples from a given population. XP-EHH was proposed to identify selection signals between populations [14]. The XP-EHH statistic was designed by comparing haplotypes from two populations in order to recognize ongoing or almost fixed selection signatures [14]. Sabeti et al. (2002) reported XP-EHH as an extension of the EHH [15]. FST, initially defined to measure the genetic divergence across populations [16], is an alternative statistic to recognize selection signatures among populations [17]. To classify genome regions under selection, FST has been formerly applied to different sheep populations by several studies [18,19]. Several genomic regions related to body size, reproductive performance, morphological traits, and skeletal morphology have been identified in these studies, which have been targeted via both artificial and natural selection during domestication [20]. Recently, QTL databases have been well developed due to advances in livestock genomics research and high-throughput genomics technologies. They could be linked to the most recent version of reference genomes such as sheep, cow, pig, fish, etc. [21]. These fine-mapped QTLs could provide accurate coordinates of genes and genomic regions related to known traits in livestock species. Therefore, researchers could pinpoint selection signatures to desired traits in livestock species [22]. This study aimed to assess genetic diversity, population structure, and identify regions under selection in each population and different regions between the populations using the Illumina OvineSNP50K Genotyping BeadChip array, and putative candidate genes were associated with these regions in Iranian and Afghan Baluchi populations of sheep. Materials and methods Sampling and genotyping All experimental protocols were approved by the Biomedical Ethics Committee at Ferdowsi University of Mashhad with approval number 2/58110. Genotypes were obtained from previously published studies where all procedures were conducted in strict accordance with relevant guidelines and regulations, including the ARRIVE guidelines (Animal Research: Reporting of In Vivo Experiments). Our re-analysis of these public datasets followed standard bioinformatics practices. In this study, the genotype data of 101 unrelated animals, including 86 Iranian Baluchi and 15 Afghan Baluchi sheep, were used to identify selection signatures. Iranian Baluchi samples were collected from Abbas Abad Breeding Centre, Mashhad, Iran, and Afghan Baluchi samples were collected from different areas of Herat province. The IB flock was specifically selected as the most reliable source of purebred IB genetics, given the lack of documented purity information for Baluchi populations scattered across eastern and southern Iran, where field animals are typically maintained as crossbreeds or grade flocks. While the IB sample (n = 86) adequately represents this managed breeding population, it may not fully capture the broader geographic diversity of Iranian Baluchi sheep. The limited AB sample size reflects substantial logistical challenges in Afghanistan, where no dedicated Baluchi breeding centers exist, making identifying additional purebred animals infeasible. Also, due to extensive crossbreeding among Afghan sheep populations, finding pure Afghan Baluchi was very difficult; therefore, our sample size was limited. Iranian Baluchi genotype data were obtained from a study by Gholizadeh et al. (2015) (Supporting information IB) [23], and Afghan Baluchi data were obtained from Karimi et al. (2016) (Supporting information AB) [24]. Blood samples were taken in EDTA-containing tubes and kept in −20 °C until further use. DNA was extracted using GenElute™ Blood Genomic DNA Kit. Genotyping was performed by Ovine SNP50K Beadchip array (Illumina Oar_v4.0 assembly) in both groups, with all SNP coordinates mapped to this reference genome. Quality control and population structure PLINK V1.9 software was used to control the quality of genotype data of IB and AB populations. Animals with genotyping call rate lower than 99% and SNPs with genotyping call rate below 99% and minor allele frequency lower than 5% were removed. SNPs with a large deviation from Hardy-Weinberg equilibrium (P < 106) were removed as well [25]. Also, to control for inbreeding, examined pairs with a very high PI_HAT value (above 0.5) using the IBD test in PLINK version 1.9. In the Iranian Baluchi population, found only one pair that exhibited first-degree consanguinity. Therefore, one individual from this pair was excluded and the impact of this exclusion through a sensitivity analysis was evaluated. The principal component analysis was performed to screen population structure between and within breeds. Principal component analysis (PCA) was performed on SNPs using PLINK V1.9 to identify genetic relationships among breeds [26]. The graphical representation of PCA was depicted using the ggfortify v0.4.19 R package, with 95% confidence ellipses plotted around each population. After conducting principal component analysis, the population structure was determined using the ADMIXTURE v1.3.0 program [27]. Evaluated ancestral populations for K values ranging from 1 to 10, and the optimal number of ancestral populations was determined using the cross-validation criterion. ADMIXTURE v1.3.0 was run with 10-fold cross-validation and the default random seed. Cross-validation was enabled by simply adding the --cv flag to the ADMIXTURE command line. A good value of K will exhibit a low cross-validation error compared to other K values. Additionally, genetic distances were calculated by PLINK V1.9, with --distance 1-IBS flat-missing square to generate a pairwise identity-by-state (IBS) distance matrix. A heatmap was generated using the pheatmap v1.0.13 package in the R v4.5.0 software with Euclidean distance metric and Ward.D2 clustering method [28]. The Neighbor-Joining (NJ) tree was constructed from the IBS distance matrix using R, visualized, and enhanced with the iTOL website [29]. Genetic diversity parameters To assess genetic diversity within and between two sheep populations, calculated several metrics: nucleotide diversity (π), inbreeding coefficient (FIS), observed heterozygosity (HO), expected heterozygosity (HE), minor allele frequency (MAF), and average pairwise genetic distance (D). The π was determined using VCFtools v0.1.17 with a 100-kb sliding window and a step size of 50 kb across the genome. For the calculations of MAF, HO, HE, and FIS, PLINK v1.9 utilised [26]. Additionally, the average proportion of alleles shared between two individuals within the same breed (DST) using PLINK v1.9, from which the genetic distance between individuals in a sheep population was calculated as D = 1 – DST [30]. Effective population size and linkage disequilibrium decay The effective population size (Ne) was estimated using SNeP v1.1 [31] through the analysis of linkage disequilibrium (LD) patterns between SNPs. To exclude low-frequency alleles, a MAF threshold of 0.05 was applied [32]. Ne trajectories were obtained using the default LD-based settings of SNeP (mindist = 50 kb, maxdist = 4 Mb, alpha = 1, recombination rate 1 × 10 ⁻ ⁸ per bp, sample-size–corrected r² and unphased genotypes), following Barbato et al. (2015) [31], and 95% confidence intervals were derived from a block-bootstrap over LD bins (weighted by the number of SNP pairs per bin). Linkage disequilibrium (r²) among SNPs was estimated separately within each sheep population using PLINK v1.9 with parameters --ld-window-r2: 0, ld-window: 100, and ld-window-kb: 1000 [26]. Pairwise r² values were grouped into consecutive 10‑kb non-overlapping physical distance bins from 0 to 1 Mb (0–10 kb, 10–20 kb, …, 990–1000 kb). For each distance bin, we calculated the mean r², its standard error, and the corresponding 95% confidence interval across all SNP pairs; the mean r² values were plotted against the midpoint of each distance bin, with shaded 95% confidence ribbons, to visualize LD decay patterns in each population [33]. Detection of selection signatures In this study, FST and XP-EHH statistical methods were used to identify selection signatures in IB and AB samples and to examine the demographic differences. Two populations were first merged based on common SNPs. FST identified genomic regions selected differentially in IB and AB. The FST statistic was calculated using PLINK v1.9 software, based on the unbiased estimator suggested by Weir and Cockerham (1984). Considering population differences and sampling error, this method has an advantage [34]. After calculating FST value, the average numerical values of the five adjacent SNPs were used as the Win5FST value to increase the chance of identifying selection signatures instead of the numerical value of each SNP [35]. The Win5FST approach indicates overlap windows by 5 adjacent SNPs rather than a fixed BP window, with one SNP moving forward in the sequence. R v.4.5.0 software was used to calculate numerical values for a high percentage of each chromosome, and regions with high values for all adjacent SNPs were considered as selection signatures [36]. XP-EHH is based on linkage disequilibrium and haplotype length. In this method, selection signatures were identified by alleles with high EHH [15]. Furthermore, XP-EHH compares EHH integrals between two populations with the same number of SNPs, taking into account linkage disequilibrium, haplotype length, as well as the frequency and distance between SNPs. The rehh v3.2.2 R package was used to calculate XP-EHH [37]. Before XP-EHH analysis, genomic VCF files for each population were filtered for high-quality SNPs (MAF > 0.01) and confirmed to contain phased haplotypes [14]. No additional imputation or phasing was performed, as the input VCFs were derived from pre-phased sequencing data. For each chromosome, haplotypes were converted to haplohh objects using data2haplohh () from rehh v3.2.2 with: min_maf = 0.01, allele_coding = “01”, polarize_vcf = FALSE, remove_multiple_markers = TRUE [37]. XP-EHH is based on linkage disequilibrium and haplotype length, identifying selection signatures by comparing EHH integrals between populations [15]. EHH scans were performed using scan_hh() (limhaplo = 5, limehh = 0.05, limehhs = 0.05, phased = TRUE) and XP-EHH scores calculated per-chromosome with ies2xpehh(standardize = TRUE) which performs Z-score normalization within each chromosome (mean = 0, SD = 1) [37]. Scans were conducted per chromosome and combined genome-wide. The top 1% outliers in FST and XP-EHH values (|XP-EHH| ≥ 3) were selected following standard empirical thresholds without multiple testing correction due to marker LD and the exploratory nature of selection scans [38–40]. Finally, after identifying selection signatures using the FST and XP-EHH methods, related putative candidate genes were extracted with PLINK V1.9, utilizing a gene list generated by the Illumina Company [41]. Gene ontology and QTL report DAVID (version 6.8) was used to detect important metabolic KEGG pathways and gene ontology analysis. DAVID is a database for visualisation, annotation, and integrated discovery [42]. After applying Bonferroni correction for multiple testing, pathways with p-values less than 0.05 were considered statistically significant. The AnimalQTL database (www.animalgenome.org/cgi-bin/QTLdb/OA/index) was used to identify positions of previously reported sheep QTLs [21]. Then, the identified genes from important FST and XP-EHH regions were matched with those QTLs to find any traits under selection in Baluchi sheep from Iran and Afghanistan. All analyses were performed on a Linux (Ubuntu 20.04) high-performance computing cluster using R v4.5.0, plink v1.9, and VCFtools v0.1.17. Full command flags and random seed details are provided in the S1 File. Results Quality control of data and population structure After quality control, 44791 SNPs and 42305 SNPs remained in AB and IB, respectively. Quality control levels are shown in S1 Table. Additionally, we utilized shared SNPs between the two populations to estimate genetic diversity, population structure, FST, and XP-EHH (38193 SNPs), thereby obtaining more accurate results. In general, IB and AB populations most likely have originated from a common founder population. However, the PCA result indicated that the IB and AB populations were distinct (Fig 1). The results of the principal component analysis of the IB and AB populations indicate that PC1 and PC2 account for 18.07% and 17.58% of the total variance, respectively. Population structures analysis. Results of Principal component analysis of Iranian (blue, n = 86) and Afghan Baluchi (red, n = 15) sheep based on SNPs. Eigenvector x (x-axis is PC1) versus Eigenvector y (y-axis is PC2). PC1 and PC2 account for 18.07% and 17.58% of the total variance, respectively. 95% confidence ellipses shown per population. SNPs, single-nucleotide polymorphisms. A heatmap was generated to visualize pairwise genetic distances among 101 individuals from the AB and IB sheep populations. The IB individuals formed a tight genetic cluster characterized by predominantly low pairwise distances (pale blue), indicating notable genetic uniformity within this population. In contrast, the AB population displayed substantially higher genetic distances (deep blue), highlighting the higher genetic distinctness between individuals in this population. The diagonal red band of low distances corresponds to self-comparisons, while the off-diagonal patterns reveal the hierarchical genetic structure differentiating the two populations (Fig 2A). The NJ tree analysis revealed that although both populations had a common ancestor in the relatively distant past, in recent times the genome of AB population had become different from that of IB population (Fig 2B). Also, ADMIXTURE analysis was conducted to investigate the population structure (Fig 2C), evaluating K values from 1 to 10. The optimal number of genetic clusters was determined to be K = 2, based on the lowest cross-entropy error of 0.603 observed during cross-validation (Fig 2D). At K = 2, a clear genetic distinction was evident between the AB and IB populations. Higher K values, such as K = 3 and K = 4, revealed further sub-structuring within the populations, with unique ancestry components identified in several individuals, as shown in S2 Fig. Genetic relationships and population structure among AB (Afghan Baluchi) and IB (Iranian Baluchi) populations. (A) Heatmap of pairwise 1-IBS genetic distances between the AB and IB populations. Euclidean distance; Ward.D2 hierarchical clustering. red (low similarity) to blue (high similarity). (B) Neighbour-joining tree based on 1-IBS genetic distances of IB and AB sheep. (C) ADMIXTURE analysis results for K = 2 displaying ancestry proportions for individuals in the AB (individual 1-15) and IB populations (individual 16-101). (D) Cross-entropy error values from the ADMIXTURE analysis suggest that K = 2 is the best number of genetic clusters‌‌. Genetic diversity parameters Genetic diversity parameters, including MAF, nucleotide diversity (π), HO, HE, D, and FIS, were calculated for AB and IB populations (Table 1). The MAF values were nearly identical across both populations, with AB having a mean of 0.291 and IB slightly lower at 0.283. Nucleotide diversity showed minimal variation, ranging from 0.000037 in IB to 0.000039 in AB. HO and HE values were similar between the two populations, with AB showing both metrics at 0.38, while IB had HO at 0.38 and HE at 0.37. The IB population had the lowest HO and HE. The FIS values were low in both populations, with AB at −0.0177 and IB at −0.0194, indicating lower deviation from the Hardy-Weinberg equilibrium. The D values were also slightly lower in the IB population (0.296) than in the AB population (0.315). 10.1371/journal.pone.0350262.t001Table 1Different parameters of genetic diversity in AB and IB populations.ParameterIBAB π* 3.7823.988 F IS −0.019−0.018 H O 0.380.384 H E 0.3720.381 MAF 0.2830.291 D 0.2960.315π: nucleotide diversity, FIS: inbreeding coefficient, HO: observed heterozygosity, HE: expected heterozygosity, MAF: minor allele frequency, D: average pairwise genetic distance, *Values expressed as 10−5. Different parameters of genetic diversity in AB and IB populations. π: nucleotide diversity, FIS: inbreeding coefficient, HO: observed heterozygosity, HE: expected heterozygosity, MAF: minor allele frequency, D: average pairwise genetic distance, *Values expressed as 10−5. Effective population size and linkage disequilibrium decay The effective population size (Ne) over the past 1000 generations was estimated using LD-based methods, revealing a steady decline in Ne across both populations, indicative of diminishing genetic diversity over time. Between the two populations, IB showed higher Ne values in recent generations compared to AB. Approximately 400 years ago, Ne was estimated at around 1,700 for AB and 1,537 for IB, with AB initially having the larger Ne. However, this pattern shifted in more recent generations, with IB maintaining the higher Ne, suggesting differing historical population dynamics between the two populations. Shaded 95% confidence intervals around the Ne trajectories, obtained by block bootstrap over LD bins, illustrate the uncertainty associated with these recent Ne estimates (Fig 3A). Linkage disequilibrium (LD) was evaluated for AB and IB populations by calculating pairwise r² values over SNP distances up to 1 Mb. Both populations exhibited a decreasing trend in average LD (r²) with increasing physical distance between SNPs. Shaded 95% confidence ribbons around the mean r² curves illustrate the uncertainty of these estimates across distance bins. Notably, AB displayed the most rapid LD decay, consistently showing lower r² values across all distances, indicative of reduced genetic linkage within this population (Fig 3B); the number of pairwise SNP comparisons contributing to each distance bin is provided in S2 Table. Effective population size (Ne) and linkage disequilibrium (LD) decay for the AB and IB populations. (A) Changes in effective population size (Ne) over the last 1000 generations based on genome‑wide LD (r²) binned by physical distance. Shaded areas represent 95% confidence intervals obtained by block bootstrap over LD bins. (B) Decline in LD, shown as r², with increasing distances between SNPs. Shaded areas represent 95% confidence intervals of mean r² based on the standard error within each bin. Detection of selection signatures In this study, the results of FST showed that several regions under selection were located on different chromosomes. A Manhattan plot of FST statistics is shown in Fig 4. In this plot, regions with high win5FST values represent the distinction between IB and AB. The complete information is presented in S3 Table. Distribution of win5FST values in the genome between Iranian and Afghan Baluchi sheep. X-axis represents the chromosome and Y-axis represents the distribution of Win5FST. Chromosomes are separated based on color. In this graph, regions with win5FST values above the line (0.18 < Win5FST) are introduced as significant regions, which are spread over 21 different chromosomes. XP-EHH was performed to evaluate the genomic pattern of positive selection in the Baluchi populations. In this study, XP-EHH was used as a complement to FST, with more reliable results in case of identification of similar genomic regions. The 38193 SNPs utilised in the current study covered 2869.91 Mb of the sheep genome, with an average distance of 77.13 kb between neighbouring SNPs. The Manhattan plot was drawn to identify selection signatures in IB and AB (Fig 5). According to this plot, 87 significant XP-EHH signals were detected in IB sheep, whereas only 27 were found in AB sheep. The distribution of XP-EHH values in the genome between Iranian and Afghan Baluchi sheep showed negative values related to IB and positive values related to AB. Chromosomes are separated based on color. X-axis represents chromosome, and Y-axis represents XP-EHH values. Significant regions in the IB population are markers whose XP-EHH distribution is less than −3, and significant regions in the AB population are markers whose distribution is higher than 3. Gene ontology and KEGG pathway analysis The Gene Ontology analysis showed that significant genes in terms of FST were enriched in female pregnancy and regulation of glutamate receptor activity. KEGG pathway analysis and Gene Ontology of XP-EHH in IB population putative candidate genes were enriched in pathways, including intracellular signal transduction and regulation of microtubule cytoskeleton organization. In AB population, putative candidate genes were enriched in pathways including cancer and MAPK signalling pathway, and neuromuscular junction development (Table 2). 10.1371/journal.pone.0350262.t002Table 2KEGG pathway and Gene Ontology analysis of FST and XP-EHH putative candidate genes were related to Iranian and Afghan Baluchi sheep.CategoryTermBonferroni-corrected P-ValueGenesFST BP1regulation of N-methyl-D-aspartate selective glutamate receptor activity0.014RASGRF1, CRH BPfemale pregnancy0.028LOC443348, CRHXP-EHH IB sheep BPregulation of microtubule cytoskeleton organization0.029TRAF3IP1, BICD2 BPintracellular signal transduction0.038SYK, TRAF3IP1, RGS6 CC2ciliary base0.025PRKAR2B, TRAF3IP1XP-EHH AB sheep BPaxon guidance0.001ROBO2, RELN, SEMA3C, CHL1, DVL1, CNTN4 BPnitrogen compound metabolic process0.030MYO1E, ARID5B BPneuromuscular junction development0.050COL4A5, CACNA2D2 KEGGDilated cardiomyopathy0.008CACNA2D3, CACNA2D2, ADCY2 KEGGAdrenergic signaling in cardiomyocytes0.023CACNA2D3, CACNA2D2, ADCY2 KEGGOxytocin signaling pathway0.025CACNA2D3, CACNA2D2, ADCY2 KEGGPathways in cancer0.026DVL1, COL4A5, ADCY2, FGF11 KEGGMAPK signaling pathway0.050CACNA2D3, CACNA2D2, FGF111: Biological Process, 2: Cellular Component. KEGG pathway and Gene Ontology analysis of FST and XP-EHH putative candidate genes were related to Iranian and Afghan Baluchi sheep. 1: Biological Process, 2: Cellular Component. Finding QTLs Significant genes of FST were associated with some important traits in sheep, including body weight and hot carcass weight. Moreover, XP-EHH putative candidate genes in IB population were related to muscle weight in carcass, staple length, and milk fat percentage. Also, XP-EHH putative candidate genes in AB population were related to body weight, hot carcass weight, and milk yield traits, which are important in sheep (Table 3). The complete list of significant genes related to these traits has been presented in S4–S6 Tables (S4 Table). 10.1371/journal.pone.0350262.t003Table 3Significant genes of FST and XP-EHH were associated with some QTL in sheep.ChrGeneQTLFST 1DAB1FATP/LMYP/MUSWT 1FGF12ASREP/BONE_WT/FATP/REPS 4HDAC9BW/HFEC/CVFD_PRI 9CSMD3HCWT/LMA/MUSWT 11PCDH9BONEP/FATP/FATWT/FECGEN/HO/LMYP/TESTWT 25CTNNA3CVFD_PRI/MFDIAM/SL/TESTWTXP-EHH IB sheep 1GRIK3LMYP/MUSWT 2FGD3, SYKFA-C20:4/FA-C22:5/FA-C20:5/FA-C18:3/MFPER 3NCOA1HFEC/SL/TFEC_1 8MTHFD1LFECGEN/INTFAT/LATRICH_2 26KCNU1MUSWT/Stature/UDDATT/WORMCT 26TENM3MUSWTXP-EHH AB sheep 1ROBO2BONE_WT/BONEP/FATP/LMYP/FA-C22:5/FA-C20:5/PUFA/MUSWT 6KCNIP4BW/FATP/FATWT/FECGEN/HCWT/LMYP/MFDIAM/MUSWT 7MYO1EHFEC/LMA/PP/CVFD_PRI/SL 8FILIP1INTFAT/LATRICH_2 11CNTROB, FGF11BW/HCWT/INTFAT/MPUFA/PY/MYPERS/MY/LATRICH_2 16ADCY2DRESSING/LMYP/SCFT 19CACNA2D2, CHL1, CNTN4DRESSING 25ARID5B, USP54MFDIAM/CVFD_PRI/SL/TESTWT/UYCAMDG; Age at maximum daily gain, ADG; Average daily gain, BFLUMB3; Backfat at third lumbar, BW; Body weight, BDENS; bone density, BONE_WT; Bone weight in carcass, BONEP; Carcass bone percentage, FATP; Carcass fat percentage, DRESSING; Dressing percentage, FATWT; fat weight in carcass, FECGEN; Faecal egg count, FCURV; Fibre curvature, FLYD; Fleece yield, HFEC; Haemonchus contortus FEC, HO; Horns, HCWT; Hot carcass weight, IGA; Immunoglobulin A level, IGG; Immunoglobulin G level, IOA; Inherited Ovine Arthrogryposis, INTFAT; internal fat amount, JAWL; Jaw length, LMYP; Lean meat yield percentage, LMA; Longissimus muscle area, MFDIAM; Mean fibre diameter, FA-C20:4; Meat arachidonic acid content, FA-C18:1; Meat cis-vaccenic acid content, FA-C22:5; Meat docosapentaenoic acid content, FA-C20:5; Meat eicosapentaenoic acid content, FA-C20:1; Meat gadoleic acid content, FA-C18:2; Meat linoleic acid content, FA-C18:3; Meat linolenic acid content, FA-C14:0; Meat myristic acid content, FA-C18:1; Meat oleic acid content, FA-C16:0; Meat palmitic acid content, FA-C16:1; Meat palmitoleic acid content, PUFA; Meat polyunsaturated fatty acid content, FA-C14:0; Meat stearic acid content, MCARPL; Metacarpal length, MFPER; Milk fat percentage, MFY_180D; Milk fat yield, MLACT; milk lactose yield, MPUFA; milk polyunsaturated fatty acid content, PP; Milk protein percentage, PY; Milk protein yield, MYPERS; Milk yield persistency, MY; Milk Yield, MDLUMB3; Muscle depth at third lumbar, MUSWT; muscle weight in carcass, NFEC; Nematodirus FEC, CVFD_PRI; Primary fibre diameter coefficient of variance, RLEGS; Rear leg set, ASREP; Reproductive seasonality, SAOS; Salmonella abortusovis susceptibility, SCS; Somatic Cell Score, SL; Staple length, Stature; Stature, SCFA; Subcutaneous fat area, SCFT; Subcutaneous fat thickness, TESTWT; Testes weight, TOTBONE; Total bone, LATRICH_2; Trichostrongylus adult and larva count, TFEC_1; Trichostrongylus colubriformis FEC, UDDATT; udder attachment, UYC; Useful yield content, WORMCT; Worm count. Significant genes of FST and XP-EHH were associated with some QTL in sheep. AMDG; Age at maximum daily gain, ADG; Average daily gain, BFLUMB3; Backfat at third lumbar, BW; Body weight, BDENS; bone density, BONE_WT; Bone weight in carcass, BONEP; Carcass bone percentage, FATP; Carcass fat percentage, DRESSING; Dressing percentage, FATWT; fat weight in carcass, FECGEN; Faecal egg count, FCURV; Fibre curvature, FLYD; Fleece yield, HFEC; Haemonchus contortus FEC, HO; Horns, HCWT; Hot carcass weight, IGA; Immunoglobulin A level, IGG; Immunoglobulin G level, IOA; Inherited Ovine Arthrogryposis, INTFAT; internal fat amount, JAWL; Jaw length, LMYP; Lean meat yield percentage, LMA; Longissimus muscle area, MFDIAM; Mean fibre diameter, FA-C20:4; Meat arachidonic acid content, FA-C18:1; Meat cis-vaccenic acid content, FA-C22:5; Meat docosapentaenoic acid content, FA-C20:5; Meat eicosapentaenoic acid content, FA-C20:1; Meat gadoleic acid content, FA-C18:2; Meat linoleic acid content, FA-C18:3; Meat linolenic acid content, FA-C14:0; Meat myristic acid content, FA-C18:1; Meat oleic acid content, FA-C16:0; Meat palmitic acid content, FA-C16:1; Meat palmitoleic acid content, PUFA; Meat polyunsaturated fatty acid content, FA-C14:0; Meat stearic acid content, MCARPL; Metacarpal length, MFPER; Milk fat percentage, MFY_180D; Milk fat yield, MLACT; milk lactose yield, MPUFA; milk polyunsaturated fatty acid content, PP; Milk protein percentage, PY; Milk protein yield, MYPERS; Milk yield persistency, MY; Milk Yield, MDLUMB3; Muscle depth at third lumbar, MUSWT; muscle weight in carcass, NFEC; Nematodirus FEC, CVFD_PRI; Primary fibre diameter coefficient of variance, RLEGS; Rear leg set, ASREP; Reproductive seasonality, SAOS; Salmonella abortusovis susceptibility, SCS; Somatic Cell Score, SL; Staple length, Stature; Stature, SCFA; Subcutaneous fat area, SCFT; Subcutaneous fat thickness, TESTWT; Testes weight, TOTBONE; Total bone, LATRICH_2; Trichostrongylus adult and larva count, TFEC_1; Trichostrongylus colubriformis FEC, UDDATT; udder attachment, UYC; Useful yield content, WORMCT; Worm count. Discussion The study of genetic diversity between and within animal populations offers valuable insights into the structure and relationships of populations. This knowledge is crucial for the conservation of these populations, enabling them to withstand future environmental challenges and respond effectively to long-term selection, whether natural or artificial, for traits that are economically and culturally significant [10]. Indigenous breeds hold significant cultural value in every country, but their lower productivity often leads to their replacement by commercial breeds. To prevent losses in productivity and to enhance the economics of farming, urgent measures are needed to ensure the survival and protection of these indigenous breeds. Consequently, the genetic structure of indigenous sheep may be impacted by demographic events, such as gene flow between different breeds and subsequent genetic mixing among them [43]. Additionally, identifying genes associated with important economic traits is vital for developing effective breeding programs for both valuable animal species and genetic resources. The main objective of this study was to characterize the genetic diversity, population structure, and detect signals of selection in the indigenous AB and IB sheep populations using 50K beadchip genotyping data. In this study, the Iranian Baluchi sheep population was sampled using 86 heads from a high-purity flock at a breeding station, a flock considered the most reliable source for pure genetic representation of the breed due to the lack of documented information on the purity of scattered populations in eastern and southern Iran. In contrast, only 15 Afghan Baluchi sheep were sampled from traditional and scattered flocks in various areas of Herat Province, reflecting the serious challenge of identifying and collecting more high-purity animals in this country. This imbalance in sample size, especially for the Afghan population, can lead to increased variance in allele frequency (AB) estimates, reduced statistical power in ADMIXTURE ancestry proportions, FST pairwise differentiation, XP-EHH selection scans, and a higher risk of false negatives in detecting population differentiation and selection signals. Therefore, the findings related to AB are more exploratory and should be interpreted with caution. To mitigate these limitations, we applied empirical genome-wide thresholds (top 1% outliers) rather than stringent p-value cutoffs and cross-validated results across complementary methods (FST + XP-EHH + LD decay). Despite these limitations, the combination of using a purebred management herd in Iran and selected field samples from Afghanistan provides a valuable picture of genetic differences and similarities between these two management and geographical contexts and can serve as a basis for designing larger studies in the future. Analysis of population structure and genetic differentiation, including PCA, Admixture, and NJ tree, revealed a relatively high level of genetic differentiation between the AB and IB sheep populations, despite their common ancestry. This significant genetic divergence may be attributed to differing selection goals, adaptations to their respective environments, and distinct breeding practices for these two populations. A study conducted in 2020 by Eydivand et al. examined 14 native sheep breeds from the Middle East and South Asia. The findings revealed that while Iranian and Afghan Baluchi sheep are more similar to each other than to other breeds and descended from a common lineage, they are classified into two distinct populations [5]. Also, in a study conducted by Barani et al. (2023) that compared three Iranian sheep breeds, the results indicated that Baluchi sheep are genetically distinct from the other breeds. This distinction is largely due to the breeding practices at the Breeding Center and the isolation of this population [44]. A study conducted on three Afghan sheep breeds revealed that the Baluchi breed is genetically close to the other breeds but is classified in its own separate group. This distinction can be attributed to the traditional breeding practices associated with the Baluchi breed and the traditional interbreeding within this breed population [24]. Genetic diversity can be examined using various parameters in studies. In this study, genetic diversity between the two populations, AB and IB, revealed that various parameters, such as HO, HE, MAF, π, D, FIS, and LD, indicate that the genetic diversity in the IB population is quite similar to, but slightly lower than, that of the AB population. But in terms of effective population size (Ne), the IB population has fared better in recent generations compared to the AB population. The observed pattern of lower genetic diversity but higher recent Ne in IB compared to AB can be explained by three interacting factors. First, the IB samples from Abbas Abad Breeding Centre represent a managed flock with systematic mating strategies designed to maintain genetic diversity and avoid inbreeding, artificially inflating recent Ne estimates despite potentially lower standing variation compared to more diverse field populations. Second, LD-based Ne is highly sensitive to sample size, with smaller samples producing downward-biased recent Ne estimates due to increased variance in allele frequency sampling and stochastic LD inflation [45,46]. Third, AB samples from traditional Herat flocks likely experienced more severe historical bottlenecks and higher recent relatedness, reducing effective Ne, while the station-managed IB flock benefits from a larger census size and controlled mating. The study by Barani estimated the levels of HO, HE, and MAF in Iranian Baluchi sheep to be 0.37, 0.38, and 0.28, which aligns with our results [44]. In another study, the average HO statistic was estimated to be between 0.34 and 0.39 for Iranian sheep, including Afshari, Moghani, Qezel, Zel, and Lori-Bakhtiari, and between 0.37 and 0.38 for Afghan sheep, including Baluchi, Gedik, and Arab breeds [5]. In a study conducted by Shi on two Tibetan sheep breeds, the results indicated the following values: for the OuLa breed, HO was 0.226, HE was 0.277, MAF was 0.223, and π was 0.0027. For the PanOu breed, the values were 0.221 for HO, 0.267 for HE, 0.228 for MAF, and 0.0026 for π [8]. In a study of Chinese breed sheep conducted by Cheng, HE ranged from 0.226–0.316, while HO varied from 0.238–0.240 [47]. A study by Demissie et al. (2025) on various sheep breeds revealed that the average values of genetic diversity parameters, including HO, HE, FIS, and MAF, were 0.352, 0.344, −0.023, and 0.261, respectively [48]. In a study conducted on nine goat breeds, the results showed that the HO was 0.374 ± 0.021, HE was 0.0369 ± 0.023, and D ranged from 0.263 to 0.332 [49]. In a study examining genetic diversity among three goat breeds, the average values for the parameters MAF, HO, HE, π, and FIS were found to be 0.32, 0.304, 0.306, 0.28, and 0.009, respectively [30]. The results of the linkage disequilibrium (LD) study indicated that the LD rate decreases as the distance between markers increases, which aligns with findings from previous studies conducted on different sheep breeds [10,30,50]. Additionally, the average LD rate was higher in the IB population compared to the AB population. A higher LD rate is associated with lower genetic diversity [33]. The results regarding effective population size (NE) indicate a significant decrease in this parameter in new generations compared to earlier ones [46,51]. The primary factors contributing to this decline include selection pressure, climate change, artificial selection, flawed mating programs, and the use of a limited number of superior rams. Specifically, in the Iranian Baluchi, the effective population size has dropped from 2,840 over 1000 previous generations to just 119 over the last 13 generations. Similarly, in the Afghan Baluchi sheep, the effective population size has decreased from 2,890 over 680 generations to only 81 in the past 13 generations. The NE results are consistent with findings from previous studies conducted on different racial groups [9,52,53]. The identified selection signatures represent candidate regions based on empirical top 1% (FST) and |XP-EHH| ≥ 3 thresholds, which are heuristic cutoffs commonly used in livestock [54–56] genomic scans but likely include false positives, particularly given the limited AB sample size. Functional validation through targeted sequencing or association studies will be required to confirm these preliminary signals. The selection signature aims to identify areas of genome differentiation between populations based on SNP information. This method is more effective when working on related populations [18]. Therefore, we analysed two populations of Iranian and Afghan Baluchi sheep that have common ancestors [5]. In this study, selection signatures were studied using FST and XP-EHH statistics. The results showed that several regions of the genomes of these two populations were selected, whose genes were associated with important economic traits. The selection signature was more intense in Iranian Baluchi sheep because they were from an animal breeding center. Therefore, it could be concluded that breeding programs caused significant differences in both studied populations at the genome level. Regions under selection found by FST statistics showed that HDAC9, CSMD3, DAB1, FGF12, and PCDH9 genes were enriched in body weight, hot carcass weight, muscle weight in carcass, reproductive seasonality, and carcass fat percentage traits, respectively. The HDAC9 gene was involved in the muscle structure development pathway in the study of Cheng et al. (2020), which was performed on Chaka sheep using whole genome sequencing [47]. Moreover, this gene is related to muscle in Garut sheep breed from Indonesia, which is used in ram fights [57]. Additionally, HDAC9 inhibited muscle differentiation transcriptional circuitry through its negative-feedback loop by suppressing MEF2 activity [58]. Several studies performed on livestock showed that HDAC9 gene is associated with skeletal muscle development [59], carcass, and meat traits [60]. In a study of 14 indigenous sheep breeds from the Middle East and South Asia, the results showed that HDAC9 gene is related to economic traits and milk traits [5]. In another study on South African Merino and Afrino sheep populations, HDAC9 gene was associated with reproductive traits in the Merino population [61]. Also, HDAC9 was reported as a selection signature in a study on worldwide sheep populations [57]. In identification of some traits in Assaf and Churra dairy sheep breeds found that the CSMD3 was related to ILCY (individual laboratory cheese yield) trait in the Churra breed [62]. Also, CSMD3, which encodes a transmembrane protein [63], was linked to body size and stature in cattle similar to our finding in sheep [64]. In the current study, FGF12 was identified as a putative candidate gene relating to reproductive traits. It has been reported in other studies related to the same reproductive traits in cattle and goat [65]. Functional annotation of differentially expressed mRNAs in hair follicle tissue showed that FGF12 was enriched in MAPK, PI3K-Akt, and RAS signalling pathways, which had a certain influence on hair follicle growth and development [66] and reproductive traits [65]. Gene ontology enrichment analysis in cashmere goats revealed that FGF12 gene was enriched in several biological pathways that were involved in hair follicle development [67]. Protocadherins are thought to be involved in different aspects of neuronal functions and development. PCDH9 is involved in synaptic cell adhesion [68]. In a study by Mastrangelo et al. (2019), it was shown that the PCDH9 gene was associated with the signal of fat deposition pathway in domestic sheep breeds from Africa and Eurasia [69]. In research on local adaptation of Mediterranean sheep and goats, selection signatures involving the PCDH9 gene, was identified in both species and therefore, could play a significant adaptive role [70]. In a study by Bakhtiarizadeh, PCDH9 in Zel sheep breed was found to be associated with fat deposition. The PCDH9 with nine SNPs was located within a sheep QTL region for carcass fat percentage. These findings indicated the role of this gene as an important putative candidate for development of fat-tail in sheep [71]. Our results showed that CTNNA3 gene is associated with staple length. This gene was significantly related to body weight, height, length, and chest circumference, which can be used as an important marker in improving growth traits in sheep breeding [72]. Multiple studies pointed out that CTNNA3 gene is important for the formation of a stable complex with the other catenins and cadherins, playing a role in solid cell–cell adhesion [73]. In biological pathways involving adherens junctions and CAMs, CTNNA3 gene was closely related to cell adhesion mechanisms [74]. In a study by Chen et al. (2021), results showed that CTNNA3 gene was related to reproduction and production traits [75]. Our QTL results based on positive XP-EHH, which is related to the Afghan Baluchi sheep, showed that ROBO2 gene was related to lean meat yield percentage, muscle weight in carcass, and carcass fat percentage and other growth-related traits. Our results were highly consistent with the results of Montiel et al. (2020) study performed on Pelibuey Sheep by Genome-Wide Association Study; Also, ROBO2 gene was related to litter size [76]. During the development of the central nervous system (CNS), this gene is crucial for axon guidance across the midline [77]. In this study, the relationship between this gene and axon guidance was identified, too. Moreover, ROBO2 gene is crucial during the early stages of follicle development in sheep, as well as during ovary development as a factor determining follicle maturation [78], resulting in an altered expression pattern that may be affected by additional factors in the ovary and steroid hormones in other reproductive tissues [79]. In a study by Mohammadi et al. ROBO2 was found to be associated with milk fat and protein yield [80]. Also, according to previous studies, ROBO2 was associated with fat metabolism, particularly in the fatty acid profile [81]. According to our results, KCNIP4 gene was associated with body weight, muscle weight in carcass, hot carcass weight, and fat weight in carcass traits in AB population. KCNIP4 was related to economic traits in genomic scans for selective sweeps in sheep breeds from South Asia and Middle East. This gene plays a critical role in heart health, as well as skeletal muscle development, body weight, and immune response [5]. A genome-wide association study of Baluchi sheep showed that KCNIP4 is also directly involved in muscle growth and fat storage in addition to indirectly modulating temperature [82]. Furthermore, KCNIP4 was identified as a gene that was related to body weight and hot carcass weight traits in a genome-wide association study in Zandi sheep, which is in agreement with the results of the current study [83]. WWOX gene was also reported as a putative candidate gene associated with bone weight in carcass and total bone traits in AB population in this study. According to Mohammadi et al. (2020), the WWOX gene was associated with the regulation of postnatal growth, skeletal muscle differentiation, and bone growth in sheep [83]. The FGF11 gene was also reported as a putative candidate gene that was associated with body weight, hot carcass weight, and milk yield traits in this study. This gene was related to body size in Chinese Merino [84], and it was reported as a selection signature in Swiss sheep breeds [85]. Moreover, in some sheep genetic resistance to gastrointestinal helminth infection results show that FGF11 gene being related to organ development [86]. Another identified gene is the CHL1 gene, which is related to axon guidance. A study conducted on Tibetan sheep; results showed that CHL1 gene is related to gas transport. Also, CHL1 is associated with homeostatic adaptation during hypoxia, in comparison to wild-type individuals; CHL1 augmented ventilatory responses were also recorded in Tibetan breed of sheep [87] and Tibetans [88] at high altitudes. Results of QTL based on negative XP-EHH relating to the Iranian Baluchi sheep showed that FGD3 gene is related to the Milk fat percentage trait. Moreover, FGD3 gene, related to metabolism and growth, was found under selection in the Welsh sheep breed [89]. In this study, NCOA1 is another significant gene relating to the staple length trait. To our knowledge, NCOA1 was related to litter size in Hu and Small-tailed Han sheep and Icelandic sheep [90]. The other significant gene, GRIK3 gene, was identified in the IB population, which is associated with lean meat yield percentage and muscle weight in carcass traits in this study. This gene encodes a glutamate inotropic receptor which plays a role in multiple biological pathways and can be found in diverse animal species, including cattle, pigs, chickens, and horses. Research has shown that GRIK3 plays a role in nervous system processes, membrane potential regulation, synaptic transmissions, and also has an essential role in the glutamate receptor signalling pathway. Moreover, GRIK3 was related to reproduction and fertility traits in a genome-wide association study in South African sheep breed [91]. It should be noted that the genes highlighted here are putative candidates, and that our interpretations are largely based on positional overlap with previously reported QTL and association signals. Because many livestock QTL are broad and sometimes pleiotropic, QTL overlap alone cannot prove causality, and some of the reported functional links may not be directly relevant to the specific environmental and management context of Baluchi sheep. Conclusion This study analysed the population structure, genetic diversity, and selection signatures between Iranian and Afghan Baluchi sheep populations. Although the Baluchi sheep population of Iran and Afghanistan shared a common ancestor, the population structure results indicated that the two populations are genetically distinct from one another. This difference may be attributed to varying selection goals, geographical factors, and environmental adaptations, and/or genetic drift due to demographic history. Overall, moderate genetic diversity was observed in both the Afghan Baluchi (AB) and Iranian Baluchi (IB) sheep populations. However, the IB population exhibited the lowest level of genetic diversity and the highest rate of linkage disequilibrium decay, while showing a better condition in terms of effective population size. Putative candidate genes identified in putative selection regions are associated with reproduction, milk production, and growth traits, consistent with previous studies. However, some signals may reflect genetic drift or demographic history rather than adaptive selection, particularly given the small Afghan sample size (n = 15). These gene-trait associations should be interpreted cautiously and framed as hypotheses requiring functional validation. According to the results of this research, it can be stated that the traditional selections (phenotypic) and modern breeding programs for economically important traits such as growth, reproduction, immune system, etc., might be in the same direction. These results should be interpreted as reflecting differences between a managed breeding population and a traditional field population rather than national level divergence. Further investigation with a larger sample size is required to compare the performance of these populations to assess the impact of identified selection signatures on economic traits. Utilizing validated QTLs as described in this study could be applied to reveal the direction of breeding plans in other livestock species such as cattle, goats, horses, chickens, and sheep. Supporting information The Baluchi sheep, right: Iranian, left: Afghan. (PDF) Description of quality control steps in Iranian and Afghan Baluchi sheep. (PDF) Full command flags and random seed details are provided. (PDF) ADMIXTURE analysis results for K = 3 and K = 4, for individuals in the AB and IB populations. (PDF) Number of pairwise SNP comparisons contributing to each distance bin. (PDF) Significant selection signatures via WIN5FST Method. (PDF) Significant genes of FST were associated with some QTL in sheep. (PDF) Significant genes of positive XP-EHH were associated with some QTL in sheep‌‌. (PDF) Significant genes of negative XP-EHH were associated with some QTL in sheep. (PDF) AB. (CSV) IB. (CSV) 8 Dec 2025 -->PONE-D-25-52267-->-->Genetic diversity, population structure, and combined detection of selection signatures in Iranian versus Afghan Baluchi sheep-->-->PLOS ONE Dear Dr. Javadmanesh, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Jan 22 2026 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Muniyandi Nagarajan Academic Editor PLOS ONE Journal Requirements: When submitting your revision, we need you to address these additional requirements. 1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf 2. Please note that PLOS One has specific guidelines on code sharing for submissions in which author-generated code underpins the findings in the manuscript. In these cases, we expect all author-generated code to be made available without restrictions upon publication of the work. Please review our guidelines at https://journals.plos.org/plosone/s/materials-and-software-sharing#loc-sharing-code and ensure that your code is shared in a way that follows best practice and facilitates reproducibility and reuse. 3. Your ethics statement should only appear in the Methods section of your manuscript. If your ethics statement is written in any section besides the Methods, please delete it from any other section. 4. Please note that your Data Availability Statement is currently missing the DOI/accession number of each dataset OR a direct link to access each database. If your manuscript is accepted for publication, you will be asked to provide these details on a very short timeline. We therefore suggest that you provide this information now, though we will not hold up the peer review process if you are unable. 5. Please upload a new copy of Figure 2 as the detail is not clear. Please follow the link for more information: https://journals.plos.org/plosone/s/figures 6. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. [Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #1: Partly Reviewer #2: Yes ********** -->2. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #1: Yes Reviewer #2: Yes ********** -->3. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #1: No Reviewer #2: Yes ********** -->4. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #1: No Reviewer #2: Yes ********** -->5. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #1: This manuscript investigates genetic diversity, population structure, and genomic regions under selection in Iranian (IB) and Afghan (AB) Baluchi sheep using Illumina OvineSNP50K data. The study employs standard and appropriate methods (PCA, ADMIXTURE, LD-based Ne estimation, FST, XP-EHH, GO/KEGG analysis), and the topic is relevant for livestock genomics and conservation of indigenous breeds. The manuscript contains interesting biological insights, and the comparison of Iranian and Afghan Baluchi sheep (populations that share a common ancestry but differ substantially in breeding history) is valuable. However, I have several concerns that must be addressed before the manuscript is suitable for publication. The most important limitations relate to the very small and unbalanced sample size for the Afghan Baluchi population, source of the Iranian Baluchi used in this study not sufficiently representing the actual population, potential overinterpretation of selection signals, and insufficient discussion of statistical power and false positives. In addition, several methodological descriptions require clarification, and the English language requires careful revision for clarity and readability. Below are my comments on each section: 1. Sample size imbalance (IB n=86 vs AB n=15) and statistical power The Afghan Baluchi population is represented by only 15 animals, while the Iranian sample includes 86. This imbalance substantially affects: - allele frequency estimates (critical for FST), - haplotype-based statistics (XP-EHH), - LD estimation, - and effective population size (Ne) inference. The manuscript does not sufficiently discuss how these methodological limitations may influence the results, particularly for the AB population. The small sample size may also inflate apparent within-population diversity or artificially alter LD decay patterns. In particular, the manuscript lacks adequate detail on how the two sample sets represent their respective populations. The sample size for AB is too small to be considered representative of a population. Although the IB sample size is large enough to represent the flock from which it was drawn, it cannot be assumed to represent the wider population. The authors also claim that the sampled animals are unrelated, but they do not explain how 86 animals from a single flock, bred for many decades, can be unrelated. It is unclear how many generations of pedigree data were examined to assess relatedness. Recommendation: Please add a detailed discussion of the limitations introduced by the sample sizes, especially with respect to FST variance, XP-EHH power, and Ne precision. This is crucial for interpreting the robustness of the AB results. It should also clearly demonstrate the IB samples are form a single flock at a breeding station which may not represent a much larger population in a vast geographical region. The authors should indicate the methodology they used to assess the relationship between sampled animals. 2. Selection thresholds and multiple testing Significance thresholds appear to be defined as the top 1% for Win5FST and |XP-EHH| ≥ 3 for XP-EHH. However: • The rationale for these choices is not clearly presented. • No multiple testing correction is attempted or discussed. • Because of the small AB sample, false positives are likely. Recommendation: Provide justification for the chosen cutoffs (e.g., empirical distributions, commonly used thresholds in the literature). Acknowledge that these represent heuristic thresholds and may include false positives. 3. Interpretation of Ne and LD results The manuscript states that IB has slightly lower diversity but higher recent effective population size compared to AB. This pattern is counterintuitive and requires additional explanation. Recommendation: Expand the discussion of how LD-based Ne behaves under selection pressure, differences in sample sizes, and differences in historical demography. Clarify whether differences in SNP retention after QC affected estimates in either group. 4. Overinterpretation of candidate genes and QTL overlaps Several candidate genes are linked to long lists of traits (e.g., growth, carcass traits, milk production, reproduction, immune traits, high-altitude adaptation, follicle development, etc.). While these associations may be reported in the literature, not all are relevant to the biological context of Baluchi sheep. Recommendation: Please moderate these sections by: • presenting these genes as “putative candidates”, • focusing on the traits that are biologically plausible in Baluchi populations, • reducing the length of gene-by-gene literature reviews, • and adding a statement acknowledging the limitations of inferring function from QTL overlap. 5. Novelty and relation to previous work Some earlier studies of sheep in the region (e.g., Eydivandi et al. 2021; Barani et al. 2023; Taheri et al. 2024) have already identified selection signatures in Baluchi sheep. Recommendation: Clarify more explicitly what novel insight this manuscript contributes beyond earlier work , for example, whether the novelty lies in the direct comparison of IB and AB or the combined use of FST, XP-EHH, and QTL integration. 6. English language and clarity There are numerous grammatical errors, missing words, and awkward phrasings throughout the manuscript (examples include missing subjects such as in “To assess genetic diversity… calculated several metrics” or inconsistent verb forms). I strongly recommend that the entire manuscript be revised by a fluent English speaker or professional editing service. 7. Methods clarity • The description of the Win5FST approach should indicate whether sliding windows overlap and how they were defined (by 5 SNPs rather than a fixed BP window). • LD analysis: specify exact distance intervals used for r² vs distance curves. • ADMIXTURE: include the sample size for each group in the figure or caption. 8. Figures and tables • PCA and ADMIXTURE figures should include clearer legends and axes. • Supplementary tables (S2–S5) should include chromosome positions, SNP counts, and window sizes. 9. Terminology consistency The manuscript alternates between “breed”, “population”, and “race.” Please standardize terminology. 10. Ethics and ARRIVE guidelines Because the genotypes were obtained from previously published studies, clarify whether ARRIVE guidelines apply to the original sampling or to the present analysis. Reviewer #2: This manuscript investigates the genetic diversity, population structure, and selection signatures in Iranian (n=86) and Afghan (n=15) Baluchi sheep using the Illumina Ovine SNP50K Beadchip array. The authors employ ADMIXTURE, FST, and XP-EHH analyses to assess genetic differentiation and identify genomic regions under selection, with a focus on economically important traits. The study finds moderate genetic diversity in both populations, clear genetic separation between Iranian and Afghan sheep, and candidate genes linked to traits such as body weight and milk yield. The work aims to inform breeding and conservation strategies for Baluchi sheep. Minor comments: Abstract: highlight the following in the abstract: 1.Sample size imbalance (IB n=86 vs. AB n=15) reduces power and may bias structure and selection scans. 2.Signals were defined by top 1% thresholds (and XP-EHH ±3) without genome-wide multiple-testing correction; results require validation. 3.Use of the Ovine 50K array can introduce ascertainment bias; analyses relied on 38,193 shared SNPs, which may miss population-specific variants. Methods: 1.State how unrelatedness was verified (e.g., KING/IBD thresholds), not just asserted as “unrelated.” Provide counts of animals and SNPs removed at each QC step per population (not just thresholds). 2.Confirm genome assembly build used (Oar_v4.0 vs. ARS-UI_Ramb_v2.0, etc.) and SNP coordinates mapping. 3.Describe phasing/imputation pipeline used for XP‑EHH (e.g., BEAGLE/SHAPEIT parameters, reference panel if any); XP‑EHH requires phased haplotypes—this is not currently described. 4. Provide ADMIXTURE cross-validation details (folds, random seed). 5. Define distance binning and how standard errors across bins were computed (and will be plotted). 6. XP‑EHH: detail normalization (per-chromosome or genome-wide), p-value computation from standardized scores, and how significant regions were called (beyond |Z|>3). 7. For GO/KEGG, report multiple-testing correction method (e.g., BH-FDR) and cutoff, not just nominal P-values. 8. full Software versions and environment are required. Already partially listed: PLINK v1.9, ADMIXTURE v1.3.0, SNeP v1.1, rehh (no version), R packages (ggfortify, pheatmap). Add: OS, R version, package versions, command flags, seeds. Discussion: 1.explicitly address the small Afghan sample size: Power limitations and higher variance in AB estimates (n=15), potential bias in ADMIXTURE, FST, and XP‑EHH, and risk of false negatives in AB. 2.The possibility that some signals reflect drift and demographic history rather than selection; interpret candidate gene links with caution and frame them as hypotheses for validation. Figures: 1. PCA: add % variance on axes (already in text) and 95% confidence ellipses by population; include LD-pruning note in legend. 2. Heatmap/NJ tree: include bootstrap support for key nodes; specify distance metric and clustering method in caption. 3. LD decay: plot mean r2 per bin with ribbons showing SE or 95% CI; report number of pairwise comparisons per bin. 4. Ne trajectories: include shaded 95% CIs (e.g., from bootstrap over SNP blocks) and note SNeP assumptions in legend. 5. Manhattan (FST, XP‑EHH): add multiple-testing thresholds (e.g., FDR line) and include QQ plots for each scan in Supplementary to assess inflation; annotate top loci with gene names. Please double check the quality of plots before publication. ********** -->6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #1: No Reviewer #2: Yes: Dr Masoud Shirali ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] To ensure your figures meet our technical requirements, please review our figure guidelines: https://journals.plos.org/plosone/s/figures You may also use PLOS’s free figure tool, NAAS, to help you prepare publication quality figures: https://journals.plos.org/plosone/s/figures#loc-tools-for-figure-preparation. NAAS will assess whether your figures meet our technical requirements by comparing each figure against our figure specifications. 24 Dec 2025 Dear Editorial Manager Warm Greeting Thank you for allowing us to submit a revised draft of the manuscript "Genetic diversity, population structure, and combined detection of selection signatures in Iranian versus Afghan Baluchi sheep" for publication in the PLOS ONE Journal. We appreciate the time and effort you and the reviewers dedicated to providing feedback on our manuscript and are grateful for the insightful comments and valuable improvements to our paper. We have incorporated most of the suggestions made by the reviewers. These changes are in red font in the manuscript. You may also find below a point-by-point response to the reviewers’ comments and concerns in blue. Reviewers' Comments to the Authors: I have separated my responses to the reviewers’ comments into several categories to achieve an integrated approach. Editor in Chief 1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf Author response: Thank you for pointing this out. We have carefully revised the manuscript and supporting information files to ensure they adhere to PLOS ONE’s style requirements, including formatting and file naming conventions, according to the official templates and recent published papers. 2. Please note that PLOS One has specific guidelines on code sharing for submissions in which author-generated code underpins the findings in the manuscript. In these cases, we expect all author-generated code to be made available without restrictions upon publication of the work. Please review our guidelines at https://journals.plos.org/plosone/s/materials-and-software-sharing#loc-sharing-code and ensure that your code is shared in a way that follows best practice and facilitates reproducibility and reuse. Author response: We thank the reviewer for highlighting the PLOS ONE code-sharing guidelines. All author-generated code underlying the key findings of this manuscript, including quality control (PLINK), population structure (PCA, Admixture), genetic diversity metrics, LD decay, Ne estimation (SNeP), FST, and XP-EHH (rehh) analyses, has been consolidated into a single, comprehensive supplementary file (S1 File) and made openly available without restrictions. 3. Your ethics statement should only appear in the Methods section of your manuscript. If your ethics statement is written in any section besides the Methods, please delete it from any other section. Author response: We appreciate the editor’s guidance. We have carefully checked the manuscript and confirm that the ethics statement is present only in the Methods section and did not appear elsewhere; therefore, no revisions were required regarding this point. 4. Please note that your Data Availability Statement is currently missing the DOI/accession number of each dataset OR a direct link to access each database. If your manuscript is accepted for publication, you will be asked to provide these details on a very short timeline. We therefore suggest that you provide this information now, though we will not hold up the peer review process if you are unable. Author response: After negotiating with all authors, we decided to upload our data file as supporting information. Hope it helps. 5. Please upload a new copy of Figure 2 as the details are not clear. Please follow the link for more information: https://journals.plos.org/plosone/s/figures Author response: A new, higher-quality version of Figure 2 has been prepared according to the PLOS ONE figure guidelines and has been uploaded to replace the previous version. 6. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. Author response: We appreciate the editor’s guidance. We have evaluated all reviewer-recommended references and incorporated the ones that are relevant to our study into the revised manuscript, where appropriate. Reviewer 1 1. Sample size imbalance (IB n=86 vs AB n=15) and statistical power The Afghan Baluchi population is represented by only 15 animals, while the Iranian sample includes 86. This imbalance substantially affects: - allele frequency estimates (critical for FST), - haplotype-based statistics (XP-EHH), - LD estimation, - and effective population size (Ne) inference. The manuscript does not sufficiently discuss how these methodological limitations may influence the results, particularly for the AB population. The small sample size may also inflate apparent within-population diversity or artificially alter LD decay patterns. In particular, the manuscript lacks adequate detail on how the two sample sets represent their respective populations. The sample size for AB is too small to be considered representative of a population. Although the IB sample size is large enough to represent the flock from which it was drawn, it cannot be assumed to represent the wider population. The authors also claim that the sampled animals are unrelated, but they do not explain how 86 animals from a single flock, bred for many decades, can be unrelated. It is unclear how many generations of pedigree data were examined to assess relatedness. Recommendation: Please add a detailed discussion of the limitations introduced by the sample sizes, especially with respect to FST variance, XP-EHH power, and Ne precision. This is crucial for interpreting the robustness of the AB results. It should also clearly demonstrate the IB samples are form a single flock at a breeding station which may not represent a much larger population in a vast geographical region. The authors should indicate the methodology they used to assess the relationship between sampled animals. Author response: We thank the reviewer for their insightful comments regarding sample size imbalance and population representation. We fully acknowledge the limitations introduced by the smaller AB sample size (n=15) compared to IB (n=86), which can increase variance in allele frequency estimates, FST, XP-EHH power, LD patterns, and Ne precision, particularly for the AB population. These limitations have now been explicitly discussed in a new paragraph in the Discussion section (lines 413-429). Regarding population representation, we clarify that the IB samples originate from a single high-purity breeding station flock, which was specifically selected due to the lack of purity information for Baluchi populations scattered across eastern and southern regions of Iran outside the station. These field populations are typically not maintained as purebreds, making the station flock the most reliable source for a representative and pure IB genetics. We now emphasize that while the IB sample (n=86) adequately represents this managed flock, it may not fully capture the broader geographic diversity of Iranian Baluchi sheep (Methods, lines 153-161). For the Afghan Baluchi (AB) samples, we acknowledge that n=15 is exploratory due to logistical challenges: unlike Iran, Afghanistan lacks dedicated Baluchi breeding centers, and these sheep are raised traditionally in mixed flocks. Identifying and collecting additional purebred AB samples proved infeasible within the scope of this study. The AB samples were collected from multiple regions in Herat province, minimizing relatedness. To address relatedness concerns, we performed IBD analysis using PLINK (PI_HAT). The AB samples showed very low PI-HAT values due to sampling from diverse regions. For IB samples, only one pair exceeded 0.5% PI-HAT; we removed one individual from this pair and conducted sensitivity analyses, which showed no substantial changes in results (Methods, lines 173-177). To address statistical concerns, we used the θ estimator for FST, which is robust to sample size imbalances and reduces bias from unequal allele frequency variance [ref: Weir & Cockerham 1984; Bhatia et al. 2013]. Similar sample sizes have been successfully applied for XP-EHH, LD decay, and Ne estimation in sheep population studies [Jin et al., 2024; Zhu et al., 2023; Khalkhali-Evrigh et al., 2025]. Despite these limitations, the consistent selection signals across methods suggest robust patterns warranting further investigation with larger samples. 2. Selection thresholds and multiple testing Significance thresholds appear to be defined as the top 1% for Win5FST and |XP-EHH| ≥ 3 for XP-EHH. However: • The rationale for these choices is not clearly presented. • No multiple testing correction is attempted or discussed. • Because of the small AB sample, false positives are likely. Recommendation: Provide justification for the chosen cutoffs (e.g., empirical distributions, commonly used thresholds in the literature). Acknowledge that these represent heuristic thresholds and may include false positives. Author response: We thank the reviewer for raising this important point regarding selection thresholds and multiple testing. We have now clarified the rationale for our thresholds in the revised Methods section (lines 246-248) and acknowledged their heuristic nature in the Discussion (lines 487-491). The top 1% threshold for Win5FST and |XP-EHH| ≥ 3 were selected following commonly used empirical cutoffs in sheep and livestock selection signature studies [Demissie et al., 2025; Abied et al., 2020; Zhang et al., 2022]. These thresholds effectively identify extreme outliers in the empirical genomic distribution, which is the standard exploratory approach for detecting candidate selection regions when prior biological knowledge is limited. Regarding multiple testing correction, we acknowledge that formal corrections (e.g., Bonferroni) are rarely applied in selection signature scans due to: (1) high linkage disequilibrium causing marker non-independence, (2) the exploratory nature of these analyses aiming to generate hypotheses rather than test them definitively, and (3) substantial power loss from overly conservative adjustments [Sabeti et al. 2007; Vitti et al. 2013]. Similar top 1% and XP-EHH thresholds without multiple testing correction are routinely reported across recent livestock genomic selection studies [Lei et al., 2021; Zhang et al., 2023]. We now explicitly state that these represent heuristic thresholds likely to include false positives, particularly given the small AB sample size, and emphasize that identified regions require experimental validation. 3. Interpretation of Ne and LD results. The manuscript states that IB has slightly lower diversity but a higher recent effective population size compared to AB. This pattern is counterintuitive and requires additional explanation. Recommendation: Expand the discussion of how LD-based Ne behaves under selection pressure, differences in sample sizes, and differences in historical demography. Clarify whether differences in SNP retention after QC affected estimates in either group. Author response: We thank the reviewer for highlighting this important point regarding the seemingly counterintuitive Ne and LD patterns between IB and AB populations. We have expanded the Discussion with a dedicated paragraph addressing these factors (lines 449-459). “The apparently higher recent Ne in IB despite lower genetic diversity reflects breeding station management practices and sample size effects on LD-based estimation, rather than true population-level differences. These patterns highlight the importance of interpreting station vs. field population estimates cautiously. Also, QC filtering was identical across populations (same --geno, --maf, --mind, --hwe thresholds), so SNP retention did not differentially affect estimates. 4. Overinterpretation of candidate genes and QTL overlaps. Several candidate genes are linked to long lists of traits (e.g., growth, carcass traits, milk production, reproduction, immune traits, high-altitude adaptation, follicle development, etc.). While these associations may be reported in the literature, not all are relevant to the biological context of Baluchi sheep. Recommendation: Please moderate these sections by: • presenting these genes as “putative candidates”, • focusing on the traits that are biologically plausible in Baluchi populations, • reducing the length of gene-by-gene literature reviews, • and adding a statement acknowledging the limitations of inferring function from QTL overlap. Author response: We agree with the reviewer that some of the original descriptions of candidate genes and QTL overlaps were overly extensive and may have suggested stronger functional evidence than is warranted. In the revised manuscript, we now consistently refer to these loci as “putative candidate genes”, have shortened the gene‑by‑gene literature descriptions, and focused our discussion on traits that are biologically plausible and relevant in Baluchi sheep (e.g. growth, fat deposition, adaptation to arid environments, reproduction and disease resistance). We have also added an explicit statement in the Discussion acknowledging the limitations of inferring gene function solely from positional overlap with broad QTL or association regions and emphasizing that our interpretations are hypothesis‑generating rather than causal. 5. Novelty and relation to previous work. Some earlier studies of sheep in the region (e.g., Eydivandi et al. 2021; Barani et al. 2023; Taheri et al. 2024) have already identified selection signatures in Baluchi sheep. Recommendation: Clarify more explicitly what novel insight this manuscript contributes beyond earlier work, for example, whether the novelty lies in the direct comparison of IB and AB or in the combined use of FST, XP-EHH, and QTL integration. Author response: We appreciate the reviewer’s comment and agree that several previous studies have investigated selection signatures in Baluchi or regional sheep populations (e.g. Eydivandi et al. 2021; Barani et al. 2023). However, those studies mainly compared Baluchi with multiple distinct breeds from Iran, Afghanistan or neighboring countries at a broad inter‑breed level, without a focused genomic comparison between Iranian Baluchi (IB) and Afghan Baluchi (AB), which are believed to share a common ancestral background. In contrast, the novelty of our work lies in (i) a dedicated, pairwise comparison of IB and AB populations to dissect how historical management and breeding in the two countries have shaped divergent selection signatures within the same breed, and (ii) the combined use of complementary statistics (FST and XP‑EHH) together with systematic integration of sheep QTL information, which allows us to link shared and population‑specific selective sweeps to concrete production, adaptation and reproduction traits and to highlight candidate regions for future functional and genomic selection studies. 6. English language and clarity. There are numerous grammatical errors, missing words, and awkward phrasings throughout the manuscript (examples include missing subjects, such as in “To assess genetic diversity… calculated several metrics” or inconsistent verb forms). I strongly recommend that the entire manuscript be revised by a fluent English speaker or a professional editing service. Author response: Thank the reviewer for highlighting the language issues. We have thoroughly revised the entire manuscript for grammatical accuracy, clarity, and fluency. All changes enhance readability while preserving the original scientific meaning. We believe the manuscript now meets high standards of English proficiency. 7. Methods clarity • The description of the Win5FST approach should indicate whether sliding windows overlap and how they were defined (by 5 SNPs rather than a fixed BP window). • LD analysis: specify exact distance intervals used for r² vs distance curves. • ADMIXTURE: include the sample size for each group in the figure or caption. Author response: Thank the reviewer for these suggestions to improve methodological transparency. All requested clarifications have been incorporated as detailed Submitted filename: Response to Reviewers.docx 22 Apr 2026 -->PONE-D-25-52267R1-->-->Genetic diversity, population structure, and combined detection of selection signatures in Iranian versus Afghan Baluchi sheep-->-->PLOS One Dear Dr. Javadmanesh, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Jun 06 2026 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. --> If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. As the corresponding author, your ORCID iD is verified in the submission system and will appear in the published article. PLOS supports the use of ORCID, and we encourage all coauthors to register for an ORCID iD and use it as well. Please encourage your coauthors to verify their ORCID iD within the submission system before final acceptance, as unverified ORCID iDs will not appear in the published article. Only the individual author can complete the verification step; PLOS staff cannot verify ORCID iDs on behalf of authors. We look forward to receiving your revised manuscript. Kind regards, Shamik Polley, M.V.Sc (Veterinary Biochemistry); Ph.D (Genetics) Academic Editor PLOS One Journal Requirements: 1. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. 2. Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice. [Note: HTML markup is below. Please do not edit.] Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #2: All comments have been addressed Reviewer #3: All comments have been addressed Reviewer #4: All comments have been addressed ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #2: Yes Reviewer #3: Yes Reviewer #4: Yes ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #2: Yes Reviewer #3: Yes Reviewer #4: Yes ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #2: Yes Reviewer #3: Yes Reviewer #4: Yes ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #2: Yes Reviewer #3: Yes Reviewer #4: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #2: This manuscript presents a well‑executed and meaningful investigation into genetic diversity, population structure, and selection signatures in Iranian and Afghan Baluchi sheep, using robust genomic tools and clear analytical methods. The identification of candidate genes linked to economically important traits is especially valuable and demonstrates both scientific rigor and practical relevance, highlighting the strength and coherence of the study’s design. Overall, the work is well‑structured, clearly written, and provides insights that make it suitable for publication. The current draft has addressed the necessary editorial refinements, and I recommend acceptance for publication. Reviewer #3: This is an interesting study which investigates the genetic diversity and population structure and notable genetic signatures in two populations of native breed sheep- the Baluchi breed from Iran and Afghanistan. Having not reviewed the original, none of the comments were mine, but appear to have been addressed. In the main, most of the comments below are just around polishing of the manuscript. I would also suggest a final proof read before re-submission. Line 65-66-this doesn’t makes sense, please reword Line 78- worth defining IB and AB in the main text (appreciate that they are defined in the abstract) Line 90-93- this is a bit of a repeat of what you have above, maybe worth considering consolidating some of this with the bits above Line 177-178- this is not a complete sentence Line 200-201- this is not a complete sentence Table 3 has a large legend with all the abbreviations in, whereas table 2 does not. Can the same be added for table 2 please Line 566- ‘with the results of the current study’ (add in ‘the’) Line 608- capital letter needed for Putative Reviewer #4: The authors have adequately addressed the main points raised in the initial review. Limitations related to sample size imbalance, statistical power, and LD based Ne estimates are now clearly acknowledged and appropriately discussed. The interpretation of selection signatures and candidate genes has been substantially moderated and framed as exploratory. In the Conclusions, it would be appropriate to explicitly state: “These results should be interpreted as reflecting differences between a managed breeding population and a traditional field population rather than national level divergence.” Overall, the manuscript is technically sound and suitable for publication after minor editorial polishing. ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #2: Yes: Dr Masoud Shirali Reviewer #3: No Reviewer #4: No ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] To ensure your figures meet our technical requirements, please review our figure guidelines: https://journals.plos.org/plosone/s/figures You may also use PLOS’s free figure tool, NAAS, to help you prepare publication quality figures: https://journals.plos.org/plosone/s/figures#loc-tools-for-figure-preparation. NAAS will assess whether your figures meet our technical requirements by comparing each figure against our figure specifications. --> 28 Apr 2026 Dear Editorial Manager Warm Greeting Thank you for following up this revision and we appreciate the time and effort you and the reviewers spent to provide comments on this manuscript. All of comments were very positive and we have applied all of the suggestions made by the reviewers. These changes are highlighted in yellow in the manuscript. Journal Requirements: Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf Author response: Thank you. All of citations are double checked now. Review Comments to the Author Reviewer #2: This manuscript presents a well‑executed and meaningful investigation into genetic diversity, population structure, and selection signatures in Iranian and Afghan Baluchi sheep, using robust genomic tools and clear analytical methods. The identification of candidate genes linked to economically important traits is especially valuable and demonstrates both scientific rigor and practical relevance, highlighting the strength and coherence of the study’s design. Overall, the work is well‑structured, clearly written, and provides insights that make it suitable for publication. The current draft has addressed the necessary editorial refinements, and I recommend acceptance for publication. Author response: Thanks a lot. Reviewer #3: This is an interesting study which investigates the genetic diversity and population structure and notable genetic signatures in two populations of native breed sheep- the Baluchi breed from Iran and Afghanistan. Having not reviewed the original, none of the comments were mine, but appear to have been addressed. In the main, most of the comments below are just around polishing of the manuscript. I would also suggest a final proof read before re-submission. Line 65-66-this doesn’t makes sense, please reword Line 78- worth defining IB and AB in the main text (appreciate that they are defined in the abstract) Line 90-93- this is a bit of a repeat of what you have above, maybe worth considering consolidating some of this with the bits above Line 177-178- this is not a complete sentence Line 200-201- this is not a complete sentence Table 3 has a large legend with all the abbreviations in, whereas table 2 does not. Can the same be added for table 2 please Line 566- ‘with the results of the current study’ (add in ‘the’) Line 608- capital letter needed for Putative Author response: We appreciate the reviewer’s comments. We have corrected all suggestions. Regarding Tables 2 and 3, I have checked and font size in these two tables are exactly the same. Therefore I can not change one based on another. Reviewer #4: The authors have adequately addressed the main points raised in the initial review. Limitations related to sample size imbalance, statistical power, and LD based Ne estimates are now clearly acknowledged and appropriately discussed. The interpretation of selection signatures and candidate genes has been substantially moderated and framed as exploratory. In the Conclusions, it would be appropriate to explicitly state: “These results should be interpreted as reflecting differences between a managed breeding population and a traditional field population rather than national level divergence.” Overall, the manuscript is technically sound and suitable for publication after minor editorial polishing. Author response: We thank the reviewer for raising this important point regarding conclusion. This statement has been added now. Best regards, Ali Javadmanesh, PhD Associate Professor Department of Animal Science, Faculty of Agriculture, Ferdowsi University of Mashhad Submitted filename: Response_to_Reviewers_auresp_2.docx 13 May 2026 Genetic diversity, population structure, and combined detection of selection signatures in Iranian versus Afghan Baluchi sheep PONE-D-25-52267R2 Dear Dr. Javadmanesh, We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements. Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication. An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager® and clicking the ‘Update My Information' link at the top of the page. For questions related to billing, please contact billing support. If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. Kind regards, Shamik Polley, M.V.Sc (Veterinary Biochemistry); Ph.D (Genetics) Academic Editor PLOS One Additional Editor Comments (optional): Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #3: All comments have been addressed Reviewer #4: All comments have been addressed ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #3: Yes Reviewer #4: Yes ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #3: Yes Reviewer #4: Yes ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #3: Yes Reviewer #4: Yes ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #3: Yes Reviewer #4: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #3: I wish to thank the authors for addressing all my comments. Manuscript reads well and I have no further comments Reviewer #4: The document is suitable for publication for the following reasons: -The manuscript is technically sound and methodologically robust. The study design is appropriate for addressing the stated research questions, and the methods are described in sufficient detail to allow reproducibility. The data presented clearly support the authors’ conclusions, and there is a strong logical connection between the results and the interpretations offered. -The statistical analyses have been performed appropriately and with a high level of rigor. The choice of statistical tests is well justified, assumptions are adequately addressed, and the analyses are correctly applied and clearly reported. The results of the statistical analyses are transparent and contribute meaningfully to the strength and credibility of the findings. -All data underlying the findings reported in the manuscript appear to be fully available and accessible, either within the manuscript itself or through the indicated supplementary materials or data repositories. This commitment to data transparency aligns well with current best practices in research and enhances the reproducibility and reliability of the study. -The manuscript is presented in an intelligible and well-organized manner and is written in clear, standard English. The structure follows a logical progression, and the arguments are easy to follow. Terminology is used consistently, and the text is accessible to readers within the field. Overall, the manuscript demonstrates a high standard of scholarly writing. -With respect to human research and publication ethics, the study appropriately addresses ethical considerations, including relevant approvals and informed consent procedures. There are no apparent concerns regarding research integrity, dual publication, or ethical compliance. In summary, this is a well-conducted and clearly presented study that makes a valuable contribution to the field. ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #3: No Reviewer #4: No ********** PONE-D-25-52267R2 PLOS One Dear Dr. Javadmanesh, I'm pleased to inform you that your manuscript has been deemed suitable for publication in PLOS One. Congratulations! Your manuscript is now being handed over to our production team. At this stage, our production department will prepare your paper for publication. This includes ensuring the following: * All references, tables, and figures are properly cited * All relevant supporting information is included in the manuscript submission, * There are no issues that prevent the paper from being properly typeset You will receive further instructions from the production team, including instructions on how to review your proof when it is ready. Please keep in mind that we are working through a large volume of accepted articles, so please give us a few days to review your paper and let you know the next and final steps. Lastly, if your institution or institutions have a press office, please let them know about your upcoming paper now to help maximize its impact. If they'll be preparing press materials, please inform our press team within the next 48 hours. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. You will receive an invoice from PLOS for your publication fee after your manuscript has reached the completed accept phase. If you receive an email requesting payment before acceptance or for any other service, this may be a phishing scheme. Learn how to identify phishing emails and protect your accounts at https://explore.plos.org/phishing. If we can help with anything else, please email us at customercare@plos.org. Thank you for submitting your work to PLOS ONE and supporting open access. Kind regards, PLOS ONE Editorial Office Staff on behalf of Dr. Shamik Polley Academic Editor PLOS One