Numerical investigation of thermal performance in unsteady Casson hybrid nanofluid flow across rotating disks under variable Darcy resistance and Joule heating Authors: Humaira Yasmin, Laila A AL-Essa, Saima Noor, Izharul Haq Published: 2026 ABSTRACT AbstractThe findings of this study have significant implications for a wide range of engineering applications that include cooling of rotating disk surfaces, the optimization of chemical reactors, and the design of filtration systems, where the synergistic use of variable porous media and hybrid nanofluids offers a pathway to enhanced performance. Keeping these substantial applications in perspective, the present study examines the optimization of thermal transport in an unsteady Casson hybrid nanofluid flowing through a variable porous medium between two rotating disks. The flow is influenced by inertial effects, Joule heating, viscous dissipation, and time-dependent heat generation and absorption effects. The modeled equations are solved through the Homotopy Analysis Method (HAM) in dimensionless form. It is deduced in this investigation that axial velocity augments with growth in stretching parameter of the lower disk , Reynolds number and suction factor while declines with augmentation in stretching parameter of the upper disk . Radial velocity augments on the interval and it declines on the range with growth in the stretching parameter of the lower disk . Tangential velocity augments with growth in suction parameter and angular velocity at the lower disk , while it declines with growth in Reynolds numbe r. Thermal profiles augment with growth in Eckert number , heat source parameter , suction parameter r and stretching parameter of lower and upper disks . A close agreement is observed between the HAM solutions and the numerical Runge-Kutta shooting results, confirming the accuracy, reliability, and validity of the HAM-based solutions. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.0%, 2.4 × 10− 5%, 2.2 × 10− 5% and 1.5 × 10− 5%. Moreover, for the same range of the percentage error in between these results are 0.05 × 10− 5%, 1.3 × 10− 5%, 1.5 × 10− 5% and 1.7 × 10− 5%.Keywords: Hybrid nanofluid, Casson fluid, Variable porous media, Unsteady flow, Variable heat source, Joule heating Introduction Nanofluid flow explains one of the most significant advancements in fluid thermal engineering over the past two decades, involving the suspension of nanometer-sized particles (typically 1–100 nm) in conventional base fluids. These nanoparticles fundamentally alter the thermophysical properties of the base fluid. The occurrence of these nanoparticles enhances thermal conductivity as revealed by Choi [1] through several mechanisms, like the formation of liquid layers at the particle-fluid interface and particle clustering, which collectively contribute to superior heat transfer characteristics compared to conventional fluids. Rathore et al. [2] discussed the impression of nanoparticles on nanofluid flow on a curved surface. Nanofluid flow behavior is governed by complex interactions between nanoparticles and the base fluid. The enhanced thermal properties of nanofluids make them particularly valuable in applications requiring efficient heat dissipation, including electronic cooling systems, automotive radiators, heat exchangers, and solar energy collectors [3]. Rafique et al. [4] examined computationally magnetized nanofluid flow on an inclined cylinder with variable thermal conductance. Hybrid nanofluid flow characterizes an evolutionary advancement in thermal fluid science, wherein two or more distinct types of nanoparticles are simultaneously suspended in a base fluid to achieve synergistic improvements in thermophysical properties beyond those attainable with single-nanoparticle nanofluids. This innovative class of heat transfer fluids combines materials with complementary characteristics, such as metallic nanoparticles with excellent thermal conductivity alongside metal oxide nanoparticles with superior chemical stability, or carbon-based nano-materials with unique structural properties alongside ceramic particles with high temperature resistance [5]. Choudhary et al. [6] studied magnetohydrodynamics hybrid nanofluid flow on a nonlinear stretchable and permeable surface with the effects of gyrotactic microorganisms. Khan et al. [7] discussed the impressions machine learning approach on the thermal efficacy of magnetohydrodynamics radiative hybrid nanoliquid flow on a surface with heat generation effects. The flow behavior of hybrid nanofluids exhibits greater complexity than conventional nanofluids due to interactions between different nanoparticle types, which can include synergistic thermal enhancement, modified particle-particle interactions, and altered flow dynamics. The selection of appropriate nanoparticle combinations, such as alumina-copper, silver-graphene, or carbon nanotube-iron oxide hybrids, depends on the specific application requirements and desired thermophysical properties. Rafique et al. [8] discussed the production of entropy and fluid flow for a hybrid nanofluid on a nonlinear radiative sheet with slip constraints. Casson fluid flow is a distinct class of non-Newtonian fluid behavior that has garnered substantial attention in both theoretical fluid mechanics and practical industrial applications due to its unique rheological characteristics. Originally developed to model the flow of printing ink containing pigment particles in a linseed oil-varnish vehicle. Algehyne et al. [9] discussed the thermal distribution for magnetized Casson nanofluid flow on an exponentially extendable sheet with the effects of chemical reactivity. The Casson constitutive equation has since been successfully applied to describe the flow behavior of numerous complex fluids, including blood, chocolate melts, tomato paste, honey, various food products, drilling muds, and polymer solutions [10]. Kavya et al. [11] studied mass and thermal transference forecasting for nanofluid flow on a surface by implementing the machine learning approach. Islam et al. [12] examined a theoretical overview and modelling for Casson fluid flow on a stretchable surface with varying viscosity and boundary constraints of a sinusoidal pattern. The fundamental distinction of Casson fluids lies in their yield stress behavior, meaning they require a finite applied stress, known as the yield stress, to initiate flow; below this critical stress threshold, the fluid maintains a rigid, solid-like structure, while above it, the material begins to deform and flow with a characteristic shear-thinning behaviour. Abbas et al. [13] studied magnetohydrodynamic Casson fluid flow with fractional order on a surface with the effects of thermal radiations. Jayaprakash et al. [14] studied the thermal transference for Casson fluid flow on an aligned flat surface with leading-edge slip boundary constraints. This yield stress phenomenon arises from the formation of internal structural networks or particle aggregates that resist deformation until sufficient external force disrupts these interactions, allowing relative motion between fluid elements. In biomedical engineering, Casson fluid models have proven particularly valuable for hemodynamic studies, as human blood exhibits pronounced yield stress behavior at low shear rates due to red blood cell aggregation and rouleaux formation, enabling more accurate predictions of blood flow through arteries, capillaries, and medical devices [15]. Industrial applications of Casson fluid flow analysis span diverse sectors, including food processing, where understanding chocolate flow during molding and coating operations ensures product quality, petroleum engineering, where drilling mud rheology affects wellbore stability and cuttings transport, and chemical manufacturing, where polymer solution behavior influences processing efficiency. Mahmood et al. [16] discussed the thermal transference process for Casson fluid flow on a radiative movable surface with convective and chemically reactive effects. Fluid flow through variable porous media represents a sophisticated and highly relevant area of fluid mechanics that addresses the complex reality of natural and engineered porous systems where permeability, porosity, and other structural properties exhibit spatial or temporal variations rather than remaining uniform throughout the medium. Lone et al. [17] studied magnetized fluid flow through two extendable surfaces with variable porosity effects on the surface. Unlike idealized homogeneous porous media models that assume constant properties throughout the domain, variable porous media acknowledge that real-world porous structures, including geological formations, biological tissues, industrial filters, and composite materials [18]. Choudhary et al. [19] examined the shape analysis of aluminium oxide nanoparticles on water flow over a permeable surface using the impressions of slip constraints. The study by Khan et al. [20] quantitatively examined Maxwell fluid behavior with dual diffusion effects within a varying permeability gap between two disks, highlighting the influence of porous variations on flow characteristics. This spatial variability fundamentally alters flow patterns, creating preferential pathways where permeability is higher while inducing stagnation or reduced velocity in low-permeability regions, leading to phenomena such as channelling, dispersion, and non-uniform residence time distributions that critically influence transport processes Alqarni et al. [21]. Waseem et al. [22] studied statistically and mathematically the Casson fluid flow with effects of activation energy on an exponentially elongating surface with Darcy regime. In hydrogeology, understanding variable porous media flow is essential for predicting contaminant transport in aquifers with heterogeneous geological structures, designing effective groundwater remediation strategies, and managing water. Petroleum reservoir engineering similarly relies heavily on variable porosity and permeability models to simulate oil and gas recovery from naturally heterogeneous formations, optimize well placement, and design enhanced oil recovery techniques that account for preferential flow paths and bypassed oil zones. Mumtaz et al. [23] investigated nanofluid flow with thermo-rheological characteristics through a variable porous space between two aligned extendable surfaces, examining how temperature-dependent viscosity and thermal conductivity influence velocity and heat transfer profiles. Industrial applications extend to designing advanced filtration systems with graded porosity for improved particle capture efficiency, optimizing catalytic converters where flow distribution through variable porous substrates affects conversion rates, and developing biomedical scaffolds with controlled pore architectures to guide tissue growth and nutrient transport [24]. Unsteady fluid flow, also commonly known as transient or time-dependent flow, represents a fundamental class of fluid motion wherein the velocity, pressure, density, and other flow properties at any given point in the flow field exhibit temporal variations, distinguishing it fundamentally from steady-state flows where conditions remain invariant with time. This time-dependent behavior arises from a multitude of physical mechanisms, including time-varying boundary conditions like oscillating surfaces or moving boundaries. Mehmood and Rehman [25] investigated the accurate prediction of nonlinear convective fluid flow over a surface by employing a machine learning framework, demonstrating its effectiveness in capturing complex flow behavior and enhancing predictive accuracy compared to traditional numerical techniques. Unsteady pressure gradients imposed by external forcing, flow instabilities that develop spontaneously even under constant boundary conditions, or the inherent transient nature of starting and stopping processes in engineering systems, as [26]. Engineering applications involving unsteady flow are equally pervasive, encompassing the start-up and shutdown of pumps and turbines, aerodynamic response of aircraft wings to gusts or manoeuvring, flow-induced vibrations in heat exchanger tubes, and offshore structures [27–30]. In nature, unsteady flows are ubiquitous and include phenomena such as pulsatile blood flow through the circulatory system driven by cardiac contractions, tidal flows in coastal regions responding to gravitational forcing, atmospheric flows influenced by diurnal heating cycles, and the complex wake dynamics behind bluff bodies characterized by periodic vortex shedding. Bilal et al. [31] studied time-dependent nanofluid flow on a Riga surface with experimental validation using micro-rotational effects on the flow system. Heat transfer in unsteady flows exhibits corresponding temporal variations, with thermal layers at the borderline developing and responding to changing flow conditions, leading to time-varying Nusselt numbers and thermal transport rates [32]. These flows have critical implications in applications ranging from electronic cooling during transient power loads to thermal management of pulsed power systems and biomedical therapies involving time-dependent heating protocols. Mahmood et al. [33] discussed magnetized time-based nanofluid flow with nonlinear radiative effects on a surface with the use of slip constraints. Jubair et al. [34] examined a computational solution for nanofluid flow with the impression of chemical reactions on an inclined cylinder/plate. Mahmood et al. [35] studied the comparative analysis of magnetized stagnant point flow for nanofluid flow on a stretchable sheet with dissipative effects. Many such works can be seen in Refs [36–40]. The analysis of unsteady flows requires careful consideration of dimensionless parameters, which characterize the relative importance of local acceleration to convective acceleration, and the reduced frequency, which quantifies the unsteadiness level in oscillatory flows relative to convective timescales. Novelty To the best of the authors’ knowledge, no investigation has yet been conducted to discuss the unsteady Casson hybrid nanofluid flow on a variable Darcy-Forchheimer regime between two spinning disks that creates a gap in existing literature. To address this research gap, the authors examine current work with the following features: The optimization of thermal transport in an unsteady Casson hybrid nanofluid flowing through two rotating disks. The optimization of thermal transport in an unsteady Casson hybrid nanofluid flowing through two rotating disks. The gap between the plates is a variable porous medium with Forchheimer effects. The gap between the plates is a variable porous medium with Forchheimer effects. The flow is influenced by inertial effects, Joule heating, viscous dissipation, and time-dependent heat generation and absorption effects. The flow is influenced by inertial effects, Joule heating, viscous dissipation, and time-dependent heat generation and absorption effects. The nanoparticles of Cu and Fe3O4 are mixed in H2O to fabricate the hybrid nanofluid. The nanoparticles of Cu and Fe3O4 are mixed in H2O to fabricate the hybrid nanofluid. The disks are revolving and stretching continuously. The disks are revolving and stretching continuously. Applications in industry This research work has substantial industrial applications in diverse engineering fields where efficient heat transfer is essential. It is particularly relevant to the design and optimization of cooling systems in rotating machinery like turbines, compressors, and disk reactors, where enhanced thermal conductivity of hybrid nanofluids improves heat dissipation and system reliability. In energy systems, including thermal and nuclear power plants as well as magnetohydrodynamic generators, the study aids in managing thermal loads by incorporating Joule heating effects and flow through porous structures modeled via Darcy resistance. The findings are also applicable in biomedical engineering, especially in bio-reactors and drug delivery systems, where the Casson fluid model represents blood-like behavior. Furthermore, the research supports advancements in electronics cooling, where compact and high-performance devices require efficient thermal regulation, and in chemical and process industries involving rotating disk reactors and porous catalytic beds for improved reaction rates and temperature control. Additional applications extend to metallurgical processes, like casting and metal forming under electromagnetic heating, and to filtration and oil recovery systems, where understanding flow through porous media is crucial. Overall, the study provides a robust theoretical foundation for enhancing thermal efficiency, controlling fluid behavior, and improving performance in complex industrial systems involving non-Newtonian fluids, rotating geometries, and electromagnetic effects. Problem formulation Take an incompressible and unsteady hybrid nanofluid flow through the gap of two spinning disks filled with a variable porous medium. The flow is influenced by Joule heating, viscous dissipation, the Darcy-Forchheimer model, and time-dependent heat generation and absorption effects. The lower disk is positioned at while the upper disk is placed at as portrayed in Fig. 1. The lower disk is spinning with angular velocity and stretching factor , while is the angular velocity of the upper disk with the stretching factor . The temperature is maintained at a lower disk is , while at the upper disk it is . Moreover, the fluid flow is also affected by inertial effects, Joule heating, viscous dissipation, and a variable heat source. Schematic diagram of fluid flow problem Keeping in view all the above stated assumptions, we have the leading equations as [17, 41, 42]: Continuity equation Momentum equations Energy equations The physical conditions at boundaries are [41]: The variables used for transformation are described as follows [41]: In the above equations, are the flow components along the cylindrical coordinates , is the Casson factor, p is pressure, is dynamic viscosity, is density and is the heat source/sink factor. Furthermore, the values of and are described as [43]: In Eq. (8) variable porosity and porosity factor, permeability factor and variable permeability factor. Making use of Eqs. (7 & 8) in Eqs. (1–5) and (6), we have Above we have Moreover, in the above equations, Reynolds number, Prandtl number, Eckert number, heat source parameter, suction parameter, Forchheimer parameter, stretching parameter of the lower disk, stretching parameter of the upper disk, rotation factor and variable porous factor. The numerical values for thermo-physical features are given in Table 1. Table 1Thermophysical properties of H2O, Cu and Fe3O4 [41]Physical propertiesWater(f)Cu(s1)Fe3O4(s2) 997.189335200 4179385670 0.6134006 0.035.96 × 10725,000 Thermophysical properties of H2O, Cu and Fe3O4 [41] Physical quantities of interest In the current study, the main quantities of interest are skin friction and Nusselt number, which are described as follows: Upon the upper disk, the friction factor is While at the lower disk, the friction factor is The radial and tangential stresses are taken as. Such that the total stress is described as Using Eq. (7) and Eqs. (16 & 17) we have from Eqs. (14 & 15) In Eq. (18) are the local Reynolds numbers, respectively, at the lower and upper plates. The Nusselt number at the lower and upper plates is given as: In Eq. (19) Using Eqs. (7 & 20) in Eq. (19), we have Solution method To solve Eqs. (9–11) using the boundary conditions given in Eq. (12), we shall use the Homotopy Analysis Method (HAM). It is a powerful and versatile semi-analytical technique for solving nonlinear differential equations that has gained substantial recognition in the applied mathematics and engineering communities since its introduction by Liao [44, 45]. This method is fundamentally rooted in the concept of homotopy from topology, which describes a continuous deformation between two functions, and it provides a sophisticated framework for transforming a complicated nonlinear problem into an infinite series of linear sub-problems that can be solved systematically. One of the most distinctive and powerful features distinguishing HAM from other perturbation-based or series expansion methods is its ability to provide great flexibility through the so-called convergence-control parameter, denoted as ħ, which offers a simple yet elegant way to adjust and control the convergence region and rate of the series solution. Unlike traditional perturbation methods that rely on the existence of small or large physical parameters, HAM remains valid regardless of the presence or magnitude of such parameters, making it applicable to strongly nonlinear problems where conventional perturbation techniques would fail. This method requires an initial guess, which for the current problem is illustrated as follows: The initial approximations for and are selected in such a way that they satisfy all boundary conditions of Eq. (12). These functions strictly satisfy The linear operators are chosen as These operators satisfy Zeroth-order deformation equations The zeroth-order deformation equations are constructed as: where is the embedding parameter. is the embedding parameter. are convergence-control parameters. are convergence-control parameters. denote nonlinear operators from Eqs. (9–11) denote nonlinear operators from Eqs. (9–11) The related boundary conditions are The solution is expressed as a power series in p: At , the exact solution becomes: m-th order deformation equations Differentiating w.r.t p and setting , we obtain: where Residual functions These functions are defined as: These are computed using previously obtained solutionsand. Boundary conditions for higher orders Convergence control The auxiliary parameters and control the convergence. Proper values are obtained using -curves, ensuring convergence of the HAM series. Final solution The approximate solutions are obtained by truncating the series: Where M denotes the order of approximation. Advantages of HAM HAM is a powerful semi-analytical technique used to solve nonlinear differential equations. It offers several advantages over traditional perturbation and numerical methods: Independence from Small/Large Parameters: Unlike perturbation methods, HAM does not require the presence of small or large parameters in the equation. This makes it applicable to a much wider class of nonlinear problems. Independence from Small/Large Parameters: Unlike perturbation methods, HAM does not require the presence of small or large parameters in the equation. This makes it applicable to a much wider class of nonlinear problems. Guaranteed Convergence Control: HAM introduces an auxiliary parameter (often denoted by ℏ), which allows you to control and adjust the convergence of the solution series. This is a unique and powerful feature of HAM. Guaranteed Convergence Control: HAM introduces an auxiliary parameter (often denoted by ℏ), which allows you to control and adjust the convergence of the solution series. This is a unique and powerful feature of HAM. Flexibility in Solution Construction: One can freely choose the initial guesses and auxiliary linear operators. This flexibility helps to tailor the method to specific problems for better efficiency. Flexibility in Solution Construction: One can freely choose the initial guesses and auxiliary linear operators. This flexibility helps to tailor the method to specific problems for better efficiency. Ability to Handle Strong Nonlinearity: HAM is particularly effective for strongly nonlinear problems, where many traditional analytical methods fail or become inaccurate. Ability to Handle Strong Nonlinearity: HAM is particularly effective for strongly nonlinear problems, where many traditional analytical methods fail or become inaccurate. Analytical Approximation (Series Solution): It provides explicit analytical series solutions, giving deeper insight into the behavior of the system compared to purely numerical methods. Analytical Approximation (Series Solution): It provides explicit analytical series solutions, giving deeper insight into the behavior of the system compared to purely numerical methods. Wide Applicability: HAM can be applied to ODEs, PDEs, integral equations, and algebraic equations. Wide Applicability: HAM can be applied to ODEs, PDEs, integral equations, and algebraic equations. No Need for Linearization: This method avoids simplifications like linearization, so the original nonlinear nature of the problem is preserved. No Need for Linearization: This method avoids simplifications like linearization, so the original nonlinear nature of the problem is preserved. Adjustable Accuracy: By increasing the order of approximation, one can systematically improve the accuracy of the solution. Adjustable Accuracy: By increasing the order of approximation, one can systematically improve the accuracy of the solution. HAM convergence The principal advantage of HAM is its inherent guarantee of convergence. Unlike other analytical techniques, the auxiliary parameter required in HAM is not chosen arbitrarily; instead, it is optimally determined to minimize residual error, thereby ensuring that the series solution converges accurately to the exact result. This provides a systematic mechanism to control the convergence region, a feature absent in most alternative methods. Consequently, HAM can robustly solve strongly nonlinear problems without necessitating a small perturbation parameter. For the present investigation, the auxiliary parameter curves for profiles and are presented in Fig. 2. This explains that the range of convergence for is for the interval of convergence is while for the range of convergence is . HAM convergence for hf, hg and Validation To validate the present results, a comparative analysis is presented in Tables 2, 3 and 4, examining the effect of variations in the Reynolds number while all other governing parameters are fixed at zero. For this purpose, the results obtained by using the HAM are compared with the corresponding numerical solutions computed via the Runge-Kutta shooting technique. The comparison is carried out for all three profiles and . The data reported in Tables 2, 3 and 4 demonstrate a close agreement between the HAM solutions and the numerical Runge-Kutta shooting results regarding the three profiles and , thereby confirming the accuracy and reliability of the HAM-based solutions that ensure the validation of HAM results. Moreover, the results for the profiles are also compared with the published work of Lone et al. [17] in Table 5 by considering variations in the rotation parameter while taking all the other parameters as zero. It is revealed in this table that there is a close agreement among all the results that ensures the authenticity of the current results. Table 2Comparison of HAM with numerical results for HAM resultsNumerical resultsError analysis Absolute error% Error01.00001.00000.00000.0%10.92350.92112.4 × 10− 32.4 × 10− 5%20.84120.83902.2 × 10− 32.2 × 10− 5%30.76200.76051.5 × 10− 31.5 × 10− 5% Comparison of HAM with numerical results for Table 3Comparison of HAM with numerical results for HAM resultsNumerical resultsError analysis Absolute error% Error0− 1.0000− 1.00000.00000.0%1− 0.8123− 0.81002.3 × 10− 32.3 × 10− 5%2− 0.6541− 0.6522.1 × 10− 32.1 × 10− 5%3− 0.5250− 0.52351.5 × 10− 31.5 × 10− 5% Comparison of HAM with numerical results for Table 4Comparison of HAM with numerical results for HAM resultsNumerical resultsError analysis Absolute error% Error00.44440.44390.05 × 10− 30.05 × 10− 5%10.53250.53121.3 × 10− 31.3 × 10− 5%20.60170.60021.5 × 10− 31.5 × 10− 5%30.66250.66081.7 × 10− 31.7 × 10− 5% Comparison of HAM with numerical results for Table 5Comparison of for variations in by keeping other factors as zero Current resultsLone et al. [17] resultsError analysis Absolute error% Error− 1.00.0666631240.0666631131.1 × 10− 81.1 × 10− 10%− 0.80.0839420350.0839420405.0 × 10− 95.0 × 10− 11%− 0.30.1039504760.1039504601.6 × 10− 81.6 × 10− 10%0.00.0999722390.0999722102.9 × 10− 82.9 × 10− 10%0.50.0666341870.0666341761.1 × 10− 81.1 × 10− 10% Comparison of for variations in by keeping other factors as zero Results and discussion The present study examines the optimization of thermal transport in an unsteady Casson hybrid nanofluid flowing through a variable porous medium between two rotating disks. The flow is influenced by inertial effects, Joule heating, viscous dissipation, and time-dependent heat generation and absorption effects. The combined influence of these effects, together with thermal radiation, nanoparticle concentration gradients, and gyrotactic microorganism transport, creates a sophisticated coupled nonlinear system. The modeled equations have been solved through the Homotopy Analysis Method (HAM) in dimensionless form. The effects of various parameters on numerous flow profiles are examined in subsequent paragraphs. Velocity profiles The effects of various parameters on axial velocity profiles , radial velocity profiles and tangential velocity are explained in Figs. (3, 4, 5, 6, 7, 8, 9, 10, 11, 12). Effect of on Effect of on Effect of on Effect of on Effect of on Effect of Re on Effect of S on Effect of on Effect of Re on Effect of S on Effects of the Stretching Parameter of the Lower Disk on Velocities and The impression of the stretching parameter of lower disk on velocities and is examined in Figs. (3 & 4). From Fig. (3), it is revealed that with growth in , there is an augmentation in . The augmentation of with an increasing can be physically interpreted as an enhanced suction or pumping effect. The lower disk, by stretching more vigorously, acts like a powerful centrifugal fan; it pulls the fluid radially outward more aggressively. To satisfy the principle of mass conservation within the incompressible flow between the disks, this increased radial outflow near the lower disk is compensated by a stronger downward axial flow from the central region. Essentially, the more the lower disk stretches, the more fluid it demands to be drawn axially toward it from the gap to feed the radial ejection, thereby accelerating the axial velocity component. From Fig. (4), a twofold behavior of is observed with growth in . The twofold behavior of in response to an increased arises from the competing effects of centrifugal force and mass conservation across the gap. In the region closer to the stretching lower disk on the interval , the direct mechanical drag and centrifugal action of the disk dominate, aggressively ejecting the fluid outward and causing an augmentation in . However, as this fluid is flung outward, the law of mass continuity dictates that it must be replenished by fluid from above. This creates a stronger axial flow (suction) toward the lower disk on the interval , which predominantly affects the upper half of the gap. This intensified downward flow effectively short-circuits the radial flow in the upper region, drawing fluid downward before it can travel very far radially, thereby reducing the radial velocity component in the region . Effects of the stretching parameter of upper disk on velocities and The impression of the stretching parameter of upper disk on velocities and is examined in Figs. (5 & 6). From Fig. (5), it is revealed that with growth there is a reduction in . The observed reduction in with an intensification in occurs because a stronger stretching action enhances the radial outflow of the fluid near the disk surface. To satisfy the principle of mass conservation within the fixed gap between the disks, this increased radial transport must be compensated by a decrease in the axial velocity component. Actually, the fluid is being sucked more intensely in the radial direction by the stretching wall, leaving less fluid to travel in the axial direction from the lower disk toward the upper one that ultimately declines the profiles . From Fig. (6), a twofold behaviour of is observed with growth in . This twofold behavior of arises from the competing effects of mass conservation and the alteration of the effective flow geometry. As rises on the interval , its influence is dominant near the surface, accelerating the fluid outward in that region. To satisfy mass conservation within the confined space, this local acceleration near the upper disk must be balanced by a deceleration or reduction in the radial velocity on the range . However, as the stretching parameter becomes sufficiently large and its influence penetrates deeper into the gap of both disks, the overall centrifugal action imparted by the upper disk intensifies across the entire gap. On the interval , this augmented stretching injects more momentum into the hybrid nanofluid, overcoming the initial compensatory deceleration and ultimately causing an augmentation of the radial velocity across the entire flow field. Effects of Reynolds number on velocities and . The impression of Reynolds number on velocities and is examined in Figs. (7 & 8). From Fig. (7), a twofold behaviour of is observed with growth in . This bifurcated response of the axial velocity to increasing inertial forces stems from the relationship between convective acceleration and the geometric constraint of the gap between the disks. In the interval near the lower disk, a rise in intensifies the fluid’s inertia, causing the flow to resist sudden changes in direction more strongly. This resistance delays the fluid’s ability to turn and move axially toward the gap exit, leading to a local reduction in the axial velocity profiles . However, as the flow progresses into a gap on the interval , the cumulative effect of mass conservation becomes dominant; the fluid that has been radially accelerated outward by the growing inertial forces creates a void that must be filled. This enhanced radial outflow in the upper regions of the gap requires a greater volume of fluid to be supplied axially from the central region, thereby augmenting the axial velocity in the interval of the gap to sustain continuity. From Fig. (8), a twofold behaviour of is observed with growth in . This trend in with increasing is governed by the transition from a dominant inertial drive to the effects of axial flow depletion. In the interval , the increase in inertial forces enhances the centrifugal effect, causing the hybrid nanofluid to be flung more vigorously outward, which results in an augmentation of the radial velocity . However, as the flow progresses into the gap on the interval , this aggressive radial ejection of fluid upstream leads to a significant depletion of the available fluid mass in the downstream region. Consequently, to satisfy the law of mass conservation, the radial velocity decelerates and reduces inside the range , compensating for the excessive outward flow that occurred earlier in the gap between the two disks. Effects of suction parameter (S) on velocity The impression of the section, parameter (S) on velocity is examined in Fig. (9). From this graphical view, it is revealed that with growth in the factor (S) there is an augmentation in . The observed augmentation in with an intensification in (S) is a direct consequence of the mass conservation principle and the enhanced removal of fluid mass from the flow domain inside the gap of two disks. Physically, strengthening the suction condition at the disk surfaces (typically by drawing fluid into the porous boundaries) creates a stronger sink effect. To replenish the fluid being extracted through the walls, the flow must accelerate in the axial direction, particularly in the core region between the disks. This increased axial velocity is a compensatory mechanism to satisfy continuity, ensuring that the volumetric flow rate lost to suction is balanced by a higher through-flow velocity. Furthermore, the presence of hybrid nanoparticles, which generally increase the fluid’s thermal conductivity and alter its momentum diffusivity, influences the boundary layer characteristics, but the primary driver for the axial velocity augmentation remains the intensified mass removal at the boundaries, which directly injects the axial pressure gradient and the resultant velocity field. Effects of angular velocity at lower disk on velocity The impression of angular velocity at the lower disk on tangential velocity is examined in Fig. (10). From this graphical view, it is revealed that with growth in the factor there is an augmentation in . The augmentation in with an intensification in is fundamentally attributed to the enhanced transmission of rotational kinetic energy from the lower disk boundary to the adjacent fluid layers. As the lower disk rotates faster, the no-slip condition injects fluid particles in immediate contact with the disk surface, which acquire a proportionally higher tangential momentum. This momentum is then transferred radially outward and axially upward through the inter-disk gap via the combined action of fluid viscosity and inertial effects, often referred to as the radial pumping. The presence of hybrid nanoparticles modifies the effective viscosity and momentum diffusivity of the base fluid, but the underlying mechanism remains governed by the rotating disk acting as a centrifugal fan; the higher the angular velocity of the lower disk , the greater the centrifugal force imparted on the fluid, resulting in a stronger tangential velocity field throughout the flow domain. Effects of reynolds number Re on velocity The impression of Reynolds number (Re) on tangential velocity is examined in Fig. (11). From this graphical view, it is revealed that with growth in the factor (Re) there is a reduction in . The observed reduction in with an escalation in (Re) is a physically consistent outcome of the changing dominance between inertial and viscous forces within the rotating flow system. As inertia intensifies, the radial pressure gradient driving the secondary flow becomes more prominent, causing the fluid to be ejected outward more aggressively near the rotating disks. To satisfy mass conservation, this augmented radial outflow necessitates a stronger axial inflow toward the disks from the gap. This enhanced axial convection transports low-tangential-momentum fluid from the upper disk downward into the mid-region and toward the rotating lower disk. Consequently, while the angular velocity of the disk remains constant, the increased Reynolds number promotes a more vigorous secondary circulation that effectively dilutes the rotational momentum, leading to a thinner tangential boundary layer and a net suppression of tangential velocity throughout the gap. Effects of suction parameter on velocity The impression of suction parameter on tangential velocity is examined in Fig. (12). From this graphical view it is revealed that with growth in the factor there is augmentation in . The augmentation of with increased suction in the hybrid nanofluid flow between two circular disks is fundamentally a consequence of the conservation of angular momentum interacting with a thinning boundary layer. As intensifies, fluid is forcibly extracted through the porous gap between the two disks, drawing high-momentum fluid from the free-stream closer to the wall surface. This radial withdrawal thins the momentum layer at the borderline, which in turn reduces the retarding effect of viscous shear stress on the spinning fluid. Consequently, fluid elements, now influenced less by viscous dissipation, are able to better preserve their initial rotational momentum as they are advective radially outward, resulting in a tangential velocity profile that is not only fuller but also maintains higher magnitude across the gap compared to cases with weaker suction. Thermal profiles The effects of various parameters on thermal profiles are explained in Figs. (13, 14, 15, 16, 17). Effect of on Effect of H on Effect of S on Effect of on Effect of on Effects of Eckert number on thermal profiles The impression of on is examined in Fig. (13). From this graphical view it is revealed that with growth in the factor there is augmentation in . The augmentation of with an increasing in the hybrid nanofluid flow between rotating disks is a direct manifestation of enhanced viscous dissipation acting as a volumetric heat source. The Eckert number, which quantifies the kinetic energy of the flow relative to its thermal enthalpy, essentially measures the capacity of the fluid to convert mechanical work into internal energy through viscous shear. As the disks spin, intense velocity gradients are generated within the boundary layers, and with a higher , the work done by these viscous stresses against the fluid motion becomes significant. This irreversible process of viscous dissipation generates thermal energy inside the fluid itself, effectively heating it from the inside the fluid. Consequently, the temperature of the hybrid nanofluid rises across the gap, leading to an augmentation of the thermal profiles . Effects of heat source parameter (H) on thermal profiles The impression of on is examined in Fig. (14). From this graphical view, it is revealed that with growth in the factor there is an augmentation in . The enhancement of with an increasing is fundamentally due to the introduction of a positive, internal energy generation term inside the fluid flow domain. In the context of flow between two rotating disks, this parameter represents a volumetric heat addition, similar to an internal heat generation mechanism or an exothermic reaction within the hybrid nanofluid. As the magnitude of this parameter grows, it injects additional thermal energy directly into the fluid at every point of the gap between the disks. This surplus energy elevates the local temperature field as it propagates from the source term throughout the domain via conduction and convection. Since the heat is generated internally rather than solely being transferred from the boundaries, the thermal layer at the boundary thickens, and the core temperature of the fluid rises significantly, resulting in a consistent augmentation of the thermal profiles across the gap. Effects of suction parameter (S) on thermal profiles The impression of on is examined in Fig. (15). From this graphical view, it is revealed that with growth in the factor there is augmentation in . The augmentation of with increased suction in the hybrid nanofluid flow between rotating disks is primarily attributed to the advection of thermal energy from the boundary into the core flow. When is intensified, fluid is forcibly extracted through the porous disk surfaces, drawing cooler fluid from the ambient towards the wall. However, as this fluid is drawn inward, it travels radially outward under the influence of centrifugal forces. The key physical mechanism here is that suction thins the thermal layer at the boundary and brings high-temperature fluid from the near-wall region deeper into the bulk flow. Furthermore, the extracted fluid carries thermal energy away from the heated boundary and redistributes it across the gap via convective transport. This effective trapping and redistribution of heat, combined with the altered velocity profiles that increase fluid residency time near the heated surfaces, leads to a net accumulation of thermal energy within the domain, thereby elevating the dimensionless temperature profiles throughout the gap. Effects of stretching parameter of the lower disk on thermal profiles The impression of on is examined in Fig. (16). From this graphical view, it is revealed that with growth in the factor there is an augmentation in . The increase in with a growing is fundamentally a consequence of enhanced viscous dissipation and altered flow kinematics near the deformable boundary. When the lower disk stretches more aggressively, it imparts greater axial and radial velocity gradients within the hybrid nanofluid. This intensification of the velocity field increases the rate of strain within the fluid layers, particularly in the vicinity of the stretching surface. According to the principles of fluid thermodynamics, this elevated mechanical deformation leads to enhanced viscous dissipation, where more kinetic energy is irreversibly converted into heat. Additionally, the stretching motion promotes stronger convective mixing and draws hotter fluid from the lower thermal layer at the borderline further into the core region between the disks. This dual mechanism results in a net accumulation of thermal energy within the flow field, thereby elevating the dimensionless temperature profiles across the gap. Effects of the stretching parameter of upper Disk on thermal profiles The impression of on is examined in Fig. (17). From this graphical view it is revealed that with growth in the factor there is an augmentation in . The augmentation of with an increasing arises from the asymmetric distribution of mechanical energy and the resulting enhancement of convective heat transfer within the gap. As the upper disk stretches more vigorously, it generates stronger velocity gradients and increased shear rates in the upper portion of the flow field. This intensification of fluid deformation near the moving boundary enhances viscous dissipation, converting a greater portion of mechanical energy into thermal energy within the hybrid nanofluid. Simultaneously, the stretching motion of the upper disk acts as a mechanical driver, promoting more vigorous radial and axial fluid movement that advects the heat generated at the upper region downward into the core flow. Unlike symmetric heating scenarios, this asymmetric stretching creates a thermal gradient where heat generated near the upper disk is efficiently transported throughout the gap by the modified convection currents. The hybrid nanofluid’s enhanced thermal conductivity further facilitates the diffusion of this generated heat across the domain. Consequently, the combined effects of increased internal heat generation from viscous dissipation and more effective thermal transport from the stretching-induced flow patterns lead to a significant elevation of the temperature profiles across the entire gap between the disks. Tables discussion Table 1 examines the thermal and physical properties of nanoparticles and the base fluid. The comparison of current results is conducted with Table 2. Tables (6 & 7) examine the effects of various factors on skin friction at lower plate and skin friction at upper plate. The contrasting behavior of skin frictions under varying parameters reflects the fundamental competition between surface deformation, mass extraction, and rotational effects on the wall shear stress. Increasing the stretching parameters of both disks directly elevates the velocity gradients at the fluid-solid interfaces, as the disks impose greater axial and radial deformation on the adjacent fluid layers, requiring stronger viscous forces to sustain this enhanced motion, and hence the growth in skin frictions at both boundaries occurs. However, when suction is intensified, fluid is forcibly extracted through the disks, thinning the momentum layer at the boundary and drawing high-momentum fluid closer to the walls; this reduces the velocity gradient at the surface because the fluid is effectively attached to the wall with less relative motion, thereby decreasing both . Similarly, a rise in Reynolds number indicates that inertial forces dominate over viscous forces, flattening the velocity profiles across the gap and reducing the steepness of the near-wall velocity gradients, which naturally lowers the frictional drag . The specific decline in upper disk skin friction with increased angular velocity of the lower disk is a consequence of the modified vorticity distribution between the two rotating boundaries; as the lower disk spins faster, it drives the core fluid into stronger rotation, effectively reducing the differential angular velocity between the upper disk and the adjacent fluid, which diminishes the shear rate and thus the skin friction at the upper surface reduces. Tables (6 & 7) examine the effects of various factors on Nusselt numbers at lower plate and skin friction at upper plate. The opposing trends in Nusselt numbers behavior respectively at lower and upper disks arise from the fundamental competition between thermal transport mechanisms and the redistribution of thermal energy within the gap. Increasing the stretching parameters of both disks enhances the radial and axial deformation of the fluid, which promotes convective mixing but simultaneously thickens the thermal layer at boundary by drawing more fluid into motion; this reduces the temperature gradient at the walls because heat is transported away from the surface as quickly as it is conducted, leading to a decline in . In contrast, the augmentation of with increasing suction, Eckert number, and heat source parameter stems from their respective abilities to steepen the near-wall temperature gradient. Suction draws cooler fluid toward the boundaries, creating a sharper thermal contrast between the wall and the adjacent fluid layer, which intensifies conductive heat flux. A rise in Eckert number introduces significant viscous dissipation within the boundary layer, generating internal heat that elevates the fluid temperature near the wall, thereby increasing the wall-to-fluid temperature difference and enhancing heat transfer. Similarly, an increase in the heat source parameter adds volumetric thermal energy directly into the fluid, raising its core temperature and steepening the thermal gradient at the cooled boundaries. Thus, while stretching flattens thermal profiles through enhanced convection, suction, viscous heating, and internal heat generation all act to concentrate thermal energy near the walls, resulting in augmented Nusselt numbers (Tables 8 and 9). Table 6Effects of various factors on skin friction at lower plate S NanofluidHybrid nanofluid0.30.30.0110.57680.60020.40.59940.62280.50.63850.66190.30.57680.600250.40.58670.61010.50.60280.62620.010.57680.60020.020.55300.57640.030.51850.541910.57680.600220.53960.563030.50710.5305 Effects of various factors on skin friction at lower plate Table 7Effects of various factors on skin friction at upper plate S NanofluidHybrid nanofluid0.30.30.0110.50.70020.72360.40.72280.74620.50.76190.78530.30.70020.72360.40.71010.73350.50.72620.74960.010.70020.72360.020.67640.69980.030.64190.665310.70020.723620.66300.686430.63050.65390.50.70020.72360.60.67540.71040.70.64870.6653 Effects of various factors on skin friction at upper plate Table 8Effects of various factors on Nusselt number at lower plate S H NanofluidHybrid nanofluid0.30.30.010.60.61.55261.77360.41.35621.57720.51.05361.27460.31.55261.77360.41.42951.65050.51.39651.61750.011.55261.77360.021.59431.81530.031.63951.86050.61.55261.77360.71.60551.82650.81.84852.06950.61.55261.77360.81.58571.80671.01.62561.8466 Effects of various factors on Nusselt number at lower plate Table 9Effects of various factors on Nusselt number at upper plate S H NanofluidHybrid nanofluid0.30.30.010.60.61.33151.55250.41.13511.35610.50.83251.05350.31.33151.55250.41.20841.42940.51.17541.39640.011.33151.55250.021.37321.59420.031.41841.63940.61.33151.55250.71.38441.60540.81.62741.84840.61.33151.55250.81.36461.58561.01.40451.6255 Effects of various factors on Nusselt number at upper plate Conclusions The present study examines the optimization of thermal transport in an unsteady Casson hybrid nanofluid flowing through a variable porous medium between two rotating disks. The flow is influenced by inertial effects, Joule heating, viscous dissipation, and time-dependent heat generation and absorption effects. The combined influence of these effects, together with thermal radiation, nanoparticle concentration gradients, and gyrotactic microorganism transport, creates a sophisticated coupled nonlinear system. The modeled equations have been solved through the Homotopy Analysis Method (HAM) in dimensionless form. The effects of various parameters on numerous flow profiles are examined in subsequent paragraphs. After a comprehensive investigation of the current work, it has been deduced that: Axial velocity augments with growth in the stretching parameter of the lower disk , Reynolds number and suction factor while declines with augmentation in the stretching parameter of the upper disk . Axial velocity augments with growth in the stretching parameter of the lower disk , Reynolds number and suction factor while declines with augmentation in the stretching parameter of the upper disk . Radial velocity augments on the interval and it declines in the range with growth in the stretching parameter of the lower disk . Radial velocity augments on the interval and it declines in the range with growth in the stretching parameter of the lower disk . With augmentation in the stretching parameter of the upper disk the radial velocity declines on the range and grows on the interva l . With augmentation in the stretching parameter of the upper disk the radial velocity declines on the range and grows on the interva l . For augmentation in Reynolds number the radial velocity grows on the range on the interval and declines on the interval . For augmentation in Reynolds number the radial velocity grows on the range on the interval and declines on the interval . Tangential velocity augments with growth in the suction parameter and angular velocity at the lower disk while it declines with growth in Reynolds number . Tangential velocity augments with growth in the suction parameter and angular velocity at the lower disk while it declines with growth in Reynolds number . Thermal profiles augment with growth in Eckert number , heat source parameter , suction parameter and the stretching parameter of the lower and upper disks . Thermal profiles augment with growth in Eckert number , heat source parameter , suction parameter and the stretching parameter of the lower and upper disks . The range of convergence for is for the interval of convergence is while for the range of convergence is . The range of convergence for is for the interval of convergence is while for the range of convergence is . A close agreement is observed between the HAM solutions and the numerical Runge-Kutta shooting results, confirming the accuracy, reliability, and validity of the HAM-based solutions. A close agreement is observed between the HAM solutions and the numerical Runge-Kutta shooting results, confirming the accuracy, reliability, and validity of the HAM-based solutions. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.0%, 2.4 × 10− 5%, 2.2 × 10− 5% and 1.5 × 10− 5%. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.0%, 2.4 × 10− 5%, 2.2 × 10− 5% and 1.5 × 10− 5%. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.0%, 2.3 × 10− 5%, 2.1 × 10− 5% and 1.5 × 10− 5%. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.0%, 2.3 × 10− 5%, 2.1 × 10− 5% and 1.5 × 10− 5%. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.05 × 10− 5%, 1.3 × 10− 5%, 1.5 × 10− 5% and 1.7 × 10− 5%. For variations in Reynolds number in the range the percentage error in between HAM and Runge-Kutta shooting results are 0.05 × 10− 5%, 1.3 × 10− 5%, 1.5 × 10− 5% and 1.7 × 10− 5%. Future scope of current work In the future, the effects of concentration will be incorporated into the current work. Moreover, to control the mass and thermal diffusions, the effects of Cattaneo-Christov flux theory will also be incorporated in the energy and concentration equations. Limitations of current work The present study is limited by relying on numerical simulations without experimental validation, which may restrict direct applicability to complex real-world industrial systems. Author contributions Humaira Yasmin: Conceptualization, Methodology, Software Reviewing and Editing. Laila A. AL-Essa: Data curation, Writing—Reviewing and Editing. Saima Noor: Visualization, Investigation. Izharul Haq: Software, Validation, Supervision & Writing—Original draft preparation. Funding This work was supported by the Deanship of Scientific Research, the Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia (Grant No. KFU263068). Princess Nourah bint Abdulrahman University Researchers Supporting Project number (PNURSP2026R443), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia. Data availability The data that support the findings of this study are available from the corresponding author upon reasonable request. Declarations Ethics approval and consent to participate Not applicable. Consent for publication Not applicable. Clinical trial number Not applicable. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. References Associated Data Data Availability Statement The data that support the findings of this study are available from the corresponding author upon reasonable request.